The effect of polymer architecture on the nano self-assemblies based on novel comb-shaped amphiphilic poly(allylamine)

The influence of amphiphilic quaternary ammonium palmitoyl glycol chitosan (GCPQ) polymer composition on oil-loaded nanocapsule architecture

HYPOTHESIS

Predicting the exact nature of the self-assembly of amphiphilic molecules into supramolecular structures is of utmost importance for a variety of applications, but this is a challenge for nanotechnology. The amphiphilic drug delivery polymer-N-palmitoyl-N-monomethyl-N,N-dimethyl-N,N,N-trimethyl-6-O-glycolchitosan (GCPQ) self-assembles in aqueous media to form nanoparticles.

EXPERIMENT

This work aimed to develop a systematic predictive mathematical model on the eventual nature of oil-loaded GCPQ-nanoparticles and to determine the main independent variables that affect their nanoarchitecture following self-assembly. GCPQ polymers were produced with varying degree of palmitoylation (DP, 5.7-23.8 mol%), degree of quaternization (DQ, 7.2-22.7 mol%), and molecular weight (MW, 11.2-44.2 kDa) and their critical hydrophilic-lipophilic balance (cHLB) optimized to produce oil-loaded nanocapsules.

FINDINGS

Non-linear mathematical models (Particle size (nm) = 466.05 - 5.64DP - 6.52DQ + 0.13DQ2 - 0.03 MW2 - 14.48cHLB + 0.48cHLB2) were derived to predict the nanoparticle sizes (R2 = 0.998, R2adj = 0.995). Smaller nanoparticle sizes (148-157 nm) were obtained at high DP, DQ, and cHLB values, in which DP was the main independent variable responsible for nanoparticle size. Single or multiple-oil cores with small particles stabilizing polymer shells could be observed depending on the oil volume. Nanoparticle architectures, especially the nature of the oil-core(s), were driven by the DP, DQ, cHLB, and oil concentration. Here, we have developed a predictive model that may be applied to understand the nanoarchitecture of oil-loaded GCPQ-nanoparticles.

An overview of polyallylamine applications in gene delivery

A chief objective of gene transportation studies is to manipulate clinically accepted carriers that can be utilized to combat incurable diseases. Despite various strategies, efficiency and application of these vectors have been hindered, owing to different obstacles. Polyallylamine (PAA) is a synthetic water-soluble, weak base cationic polymer with different properties that could be administrated as an ideal candidate for biomedical applications such as gene delivery, drug delivery, or even tissue engineering. However, some intrinsic properties of this polymer limit its application. The two associated problems with the use of PAA in gene delivery are low transfection efficiency (because of low buffering capacity) and cytotoxic effects attributed to intense cationic character. Most of the strategies for structural modification of the PAA structure have focused on introducing hydrophobic groups to the polymeric backbone that target both cytotoxicity and transfection. In this perspective, we concentrate on PAA as a gene delivery vehicle and the existing approaches for modification of this cationic polymer to give insight to researchers for exploitation of PAA as an efficient carrier in biomedical applications.

Polymeric micelles: Basic research to clinical practice

Rapidly developing polymeric micelles as potential targeting carriers has intensified the need for better understanding of the underlying principles related to the selection of suitable delivery materials for designing, characterizing, drug loading, improving stability, targetability, biosafety and efficacy. The emergence of advanced analytical tools such as fluorescence resonance energy transfer and dissipative particle dynamics has identified new dimensions of these nanostructures and their behavior in much greater details. This review summarizes recent efforts in the development of polymeric micelles with respect to their architecture, formulation strategy and targeting possibilities along with their preclinical and clinical aspects. Literature of the past decade is discussed critically with special reference to the chemistry involved in the formation and clinical applications of these versatile materials. Thus, our main objective is to provide a timely update on the current status of polymeric micelles highlighting their applications and the important parameters that have led to successful delivery of drugs to the site of action.

Cationic Polymers for Intracellular Delivery of Proteins

Many therapeutic proteins exert their pharmaceutical action inside the cytoplasm or onto individual organelles inside the cell. Intracellular protein delivery is considered to be the most direct, fastest and safest approach for curing gene-deficiency diseases, enhancing vaccination and triggering cell transdifferentiation processes, within other curative applications. However, several hurdles have to be overcome. For this purpose the use of polymers, with their ease of modification in physical and chemical properties, is attractive in protein drug carriers. They can protect their therapeutic protein cargo from degradation and enhance their bioavailability at targeted sites. In this chapter, potential and currently used polymers for fabrication of protein delivery systems and their applications for intracellular administration are discussed. Special attention is given to the use of cationic polymers for their ability to promote the cellular uptake of therapeutic proteins.

Structure of chitosan determines its interactions with mucin

Synthetic and natural mucoadhesive biomaterials in optimized galenical formulations are potentially useful for the transmucosal delivery of active ingredients to improve their localized and prolonged effects. Chitosans (CS) have potent mucoadhesive characteristics, but the exact mechanisms underpinning such interactions at the molecular level and the role of the specific structural properties of CS remain elusive. In the present study we used a combination of microviscosimetry, zeta potential analysis, isothermal titration calorimetry (ITC) and fluorescence quenching to confirm that the soluble fraction of porcine stomach mucin interacts with CS in water or 0.1 M NaCl (at c < c*; relative viscosity, η(rel), ∼ 2.0 at pH 4.5 and 37 °C) via a heterotypic stoichiometric process significantly influenced by the degree of CS acetylation (DA). We propose that CS-mucin interactions are driven predominantly by electrostatic binding, supported by other forces (e.g., hydrogen bonds and hydrophobic association) and that the DA influences the overall conformation of CS and thus the nature of the resulting complexes. Although the conditions used in this model system are simpler than the typical in vivo environment, the resulting knowledge will enable the rational design of CS-based nanostructured materials for specific transmucosal drug delivery (e.g., for Helicobacter pylori stomach therapy).

New strategy for controlled release of drugs. Potential pinpoint targeting with multiresponsive tetraaniline diblock polymer vesicles: site-directed burst release with voltage

A series of amphiphlic diblock polymers, tetraaniline block with different length of poly(N-isopropylacrylamide) (TA-b-PNIPAM), have been successfully synthesized. In a suitable solution, the as-synthesized diblock polymers can form stable large compound vesicles (LCVs) with multiple bimolecular-layer structure through self-assembly. These factors, such as the block length, different organic solvent, solvent ratio, pH value, temperature, and voltage, which affect the morphology and properties of the assembled aggregates, are systematically investigated. When the degree of polymerization of PNIPAM block is close to 10, the as-synthesized diblock polymer may form stable LCVs with the uniform size as well as few defects in the mixed solvent of dimethylformamide/water (v/v = 3:7). The assembled LCVs possess the properties of triple-responsive capacity on temperature, pH, and voltage. Variation in any of these factors can cause some changes in the morphology of LCVs. The drug release properties for doxorubicin (DOX) loaded by LCVs affected by temperature, voltage, and different pH values have been investigated. It is interesting that the structure of LCVs can be destructed completely by applying a voltage at 0.6 V. With such an advantage, the drugs loaded by the LCVs could burst release into designated place by using appropriate circuit design or instrument, thus achieving maximum efficacy of the loaded drugs or other bioactive molecules without any unnecessary chemical substances added. This approach allows us to concentrate more on material design aspects only, without regard to the complex targeting issue which is the biggest obstacle of such materials in practical applications.

Cholesterol--a biological compound as a building block in bionanotechnology

Cholesterol is a molecule with many tasks in nature but also a long history in science. This feature article highlights the contribution of this small compound to bionanotechnology. We discuss relevant chemical aspects in this context followed by an overview of its self-assembly capabilities both as a free molecule and when conjugated to a polymer. Further, cholesterol in the context of liposomes is reviewed and its impact ranging from biosensing to drug delivery is outlined. Cholesterol is and will be an indispensable player in bionanotechnology, contributing to the progress of this potent field of research.

A review on comb-shaped amphiphilic polymers for hydrophobic drug solubilization

Comb-shaped amphiphilic polymers are rapidly emerging as an alternative approach to amphiphilic block copolymers for hydrophobic drug solubilization. These polymers consist of a homopolymer or copolymer backbone to which hydrophobic and hydrophilic pendant groups can be grafted resulting in a comb-like architecture. The hydrophobic pendants may consist of homopolymers, copolymers and other low-molecular weight hydrophobic structures. In this review, we focus on hydrophobically modified preformed homopolymers. Comb-shaped amphiphilic polymers possess reduced critical aggregation concentration values compared with traditional surfactant micelles indicating increased stability with decreased disruption experienced on dilution. They have been fabricated with diverse architectures and multifunctional properties such as site-specific targeting and external stimuli-responsive nature. The application of comb-shaped amphiphilic polymers is expanding; here we report on the progress achieved so far in hydrophobic drug solubilization for both intravenous and oral delivery.

Self assembling nanocomposites for protein delivery: supramolecular interactions of soluble polymers with protein drugs

Translation of therapeutic proteins to pharmaceutical products is often encumbered by their inadequate physicochemical and biopharmaceutical properties, namely low stability and poor bioavailability. Over the last decades, several academic and industrial research programs have been focused on development of biocompatible polymers to produce appropriate formulations that provide for enhanced therapeutic performance. According to their physicochemical properties, polymers have been exploited to obtain a variety of formulations including biodegradable microparticles, 3-dimensional hydrogels, bioconjugates and soluble nanocomposites. Several soluble polymers bearing charges or hydrophobic moieties along the macromolecular backbone have been found to physically associate with proteins to form soluble nanocomplexes. Physical complexation is deemed a valuable alternative tool to the chemical bioconjugation. Soluble protein/polymer nanocomplexes formed by physical specific or unspecific interactions have been found in fact to possess peculiar physicochemical, and biopharmaceutical properties. Accordingly, soluble polymeric systems have been developed to increase the protein stability, enhance the bioavailability, promote the absorption across the biological barriers, and prolong the protein residence in the bloodstream. Furthermore, a few polymers have been found to favour the protein internalisation into cells or boost their immunogenic potential by acting as immunoadjuvant in vaccination protocols.

The oral delivery of proteins using interpolymer polyelectrolyte complexes

In spite of the numerous barriers inherent in the oral delivery of therapeutically active proteins, research into the development of functional protein-delivery systems is still intense. The effectiveness of such oral protein-delivery systems depend on their ability to protect the incorporated protein from proteolytic degradation in the GI tract and enhance its intestinal absorption without significantly compromising the bioactivity of the protein. Among these delivery systems are polyelectrolyte complexes (PECs) which are composed of polyelectrolyte polymers complexed with a protein via coulombic and other interactions. This review will focus on the current status of PECs with a particular emphasis on the potential and limitations of multi- or inter-polymer PECs used to facilitate oral protein delivery.

Nano self-assemblies based on cholate grafted poly-L-lysine enhanced the solubility of sterol-like drugs

The physicochemical compatibility between amphiphilic polymers and hydrophobic drugs has been recognized as an important issue for improving the drug solubilisation in polymeric micelle formulations. In this work, poly-L-lysine (PLL) grafted by cholate pendants as the only hydrophobic moiety were synthesized in order to facilitate the solubilisation of sterol drugs. Results showed that micelles formed by cholate grafted PLL encapsulated significantly higher level of prednisolone and estradiol than palmitoylated PLL micelles, whereas the solubilisation capacity of non-sterol drug (griseofulvin) is inefficient for both polymers. This suggests that higher drug-polymer incorporation can be achieved by the inclusion of hydrophobic moieties with similar architecture as the drugs, i.e. 'drug-like' functional groups, which will be useful for the future design of colloidal systems for the encapsulation of specific drug.

In vitro and in vivo anticancer activity of a novel nano-sized formulation based on self-assembling polymers against pancreatic cancer

PURPOSE

To evaluate the in vitro and in vivo pancreatic anticancer activity of a nano-sized formulation based on novel polyallylamine grafted with 5% mole cholesteryl pendant groups (CH(5)-PAA).

METHODS

Insoluble novel anticancer drug, Bisnaphthalimidopropyldiaaminooctane (BNIPDaoct), was loaded into CH(5)-PAA polymeric self-assemblies by probe sonication. Hydrodynamic diameters and polydispersity index measurements were determined by photon correlation spectroscopy. The in vitro cytotoxicity evaluation of the formulation was carried out by the sulforhodamine B dye assay with human pancreatic adenocarcinoma BxPC-3 cells, while for the in vivo study, Xenograff mice were used. In vitro apoptotic cell death from the drug formulation was confirmed by flow cytometric analysis.

RESULTS

The aqueous polymer-drug formulation had a mean hydrodynamic size of 183 nm. The drug aqueous solubility was increased from negligible concentration to 0.3 mg mL(-1). CH(5)-PAA polymer alone did not exhibit cytotoxicity, but the new polymer-drug formulation showed potent in vitro and in vivo anticancer activity. The mode of cell death in the in vitro study was confirmed to be apoptotic. The in vivo results revealed that the CH(5)-PAA alone did not have any anti-proliferative effect, but the CH(5)-PAA-drug formulation exhibited similar tumour reduction efficacy as the commercial drug, gemcitabine.

CONCLUSIONS

The proposed formulation shows potential as pancreatic cancer therapeutics.

In vitro and in vivo characterisation of a novel peptide delivery system: amphiphilic polyelectrolyte-salmon calcitonin nanocomplexes

The cationic peptide, salmon calcitonin (sCT) was complexed with the cationic amphiphilic polyelectrolyte, poly(allyl)amine, grafted with palmitoyl and quaternary ammonium moieties at pH 5.0 and 7.4 to yield particulates (sCT-QPa). The complexes were approximately 200 nm in diameter, had zeta potentials ranging from +20 to +50 mV, and had narrow polydispersity indices (PDIs). Differential scanning calorimetry revealed the presence of an interaction between sCT and QPa in the complexes. Electron microscopy confirmed the zeta-size data and revealed a vesicular bilayer structure with an aqueous core. Tyrosine- and Nile red fluorescence indicated that the complexes retained gross physical stability for up to 7 days, but that the pH 5.0 complexes were more stable. The complexes were more resistant to peptidases, serum and liver homogenates compared to free sCT. In vitro bioactivity was measured by cAMP production in T47D cells and the complexes had EC50 values in the nM range. While free sCT was unable to generate cAMP following storage for 7 days, the complexes retained approximately 33% activity. When the complexes were injected intravenously to rats, free and complexed sCT (pH 5.0 and 7.4) but not QPa reduced serum calcium over 120 min. Free and complexed sCT but not QPa also reduced serum calcium over 240 min following intra-jejunal administration. In conclusion, sCT-QPa nanocomplexes that have been synthesised are stable, bioactive and resistant to a range of peptidases. These enhanced features suggest that they may have the potential for improved efficacy when formulated for injected and oral delivery.

Polymers Comprising Cholesterol: Synthesis, Self-Assembly, and Applications

This article reviews the current status of self-assembling liquid crystalline polymers comprising cholesterol. This article will focus on synthesis, structure-property relationships and strategies to direct ordering and packing of meso- and nanostructures of cholesterol polymers in the neat- or melt state and in solution. The applications of these self-assembled structures will be presented.