Progress in rapid optical assays for heavy metal ions based on the use of nanoparticles and receptor molecules

A novel "on-off-on" electrochemiluminescence strategy based on RNA cleavage propelled signal amplification and resonance energy transfer for Pb2+ detection

BACKGROUND

Lead (Pb) is one of the most toxic heavy-metal pollutants. Additionally, lead ions (Pb2+) can accumulate in the human body through the food chain, causing irreversible damage through organ damage and system disorders. In the past few years, the detection of Pb2+ has mainly relied on instrumental methods such as atomic absorption spectroscopy (AAS) and inductively coupled plasma mass spectrometry (ICP-MS). Nonetheless, these techniques are complicated in terms of equipment and procedures, along with being time-intensive and expensive in terms of detection. These drawbacks have limited their wide application. Hence, there is a pressing need to develop detection techniques for Pb2+ that are not only cost-efficient but also highly sensitive and specific.

RESULTS

A novel "on-off-on" electrochemiluminescence (ECL) sensor for detecting Pb2+ was developed based on the resonance energy transfer (RET) effect between AuNPs and boron nitride quantum dots (BN QDs) and the recognition of Pb2+ by DNAzyme along with the cleavage reaction of the substrate chain. Poly(6-carboxyindole)/stannic sulfide (P6ICA/SnS2) nanocomposite was employed as a co-reaction accelerator to consequently facilitate the production of intermediate SO4•-. This effective enhancement of the reaction led to an improved ECL intensity of BN QDs and enabled the sensor platform to exhibit a higher original ECL response. Benefiting from the combination of the DNAzyme signal amplification strategy with the "on-off-on" design, the ECL sensor showed satisfactory selectivity, good stability, and high sensitivity. This ECL sensor exhibited a linear detection range (LDR) of 10-12-10-5 M and a limit of detection (LOD) of 2.6 × 10-13 M.

SIGNIFICANCE

In the present work, an "on-off-on" ECL sensor is constructed based on RET effect for ultrasensitive detection of Pb2+. P6ICA/SnS2 was investigated as the co-reaction accelerator in this sensor. Moreover, this ECL sensor exhibited excellent analytical capability for detecting Pb2+ in actual water samples, providing a method for detecting other heavy metal ions as well.

Colorimetric sensor for Cr (VI) by oxidative etching of gold nanotetrapods at room temperature

Hexavalent chromium (Cr(VI)) is highly carcinogenic and mutagenic, which is seriously harmful to human health. Hence, it is important to create a probe that can detect Cr(VI) effectively. In this work, gold nanotetrapods (Au NTPs) were applied in colorimetric detection for the first time. Based on the oxidative etching principle of Cr(VI) on Au NTPs, a sensitive and multicolor response detection method for Cr(VI) was established. The oxidative etching of Au NTPs by Cr(VI) resulted in the blue shift of plasmon resonance absorption peak of Au NTPs with the change of morphology. As the etching progress processed, Au NTPs solution exhibited obvious color changes from gray-green to blue-violet and then to pink. This multicolor response design is very convenient for naked-eye detection. The limit of detection (LOD) of Cr(VI) is 3 nM for the naked eyes and 0.5 nM for UV-vis spectrum, both of which are lower than the toxicity level of Cr(VI) (0.2 μM) set by United States Environmental Protection Agency. This sensing method exhibits good linearity between the wavelength shift and Cr(VI) concentration in the range of 0.5 nM to 8 nM. The detection results of Cr(VI) in actual environmental samples demonstrate that the Au NTPs colorimetric probe (Au-N-Probe) is expected to be applied to the detection of Cr(VI) in water environmental samples such as lake water and industrial wastewater.

Sequential Injection Analysis for Rapid Determination of Mercury in Skincare Products Based on Fluorescence Quenching of Eco-Friendly Synthesized Carbon Dots

This work reports the analysis of mercury using a spectrofluorometric method combined with a sequential injection analysis (SIA) system. This method is based on the measurement of fluorescence intensity of carbon dots (CDs), which is quenched proportionally after adding mercury ions. Herein, the CDs underwent environmentally friendly synthesis using a microwave-assisted approach that provides intensive and efficient energy and shortens reaction time. After irradiation at 750 W for 5 min in a microwave oven, a dark brown CD solution with a concentration of 2.7 mg mL^-1 was obtained. The properties of the CDs were characterized by transmission electron microscopy, X-ray diffractometry, X-ray photoelectron spectroscopy, Fourier-transform infrared spectroscopy, and UV-vis spectrometry. We presented for the first time the use of CDs as a specific reagent for the determination of mercury in skincare products with the SIA system to achieve rapid analysis and full automatic control. The as-prepared CD stock solution was diluted 10 times and used as a reagent in the SIA system. Excitation and emission wavelengths at 360 and 452 nm, respectively, were used to construct a calibration curve. Physical parameters affecting the SIA performance were optimized. In addition, the effect of pH and other ions was investigated. Under the optimum conditions, our method showed a linear range from 0.3 to 600 mg L^-1 with an R ² of 0.99. The limit of detection was 0.1 mg L^-1. Relative standard deviation was 1.53% (n = 12) with a high sample throughput of 20 samples per hour. Finally, the accuracy of our method was validated by comparison using inductively coupled plasma mass spectrometry. Acceptable recoveries were also presented without a significant matrix effect. This method was also the first time that uses the untreated CDs for the determination of mercury(II) in skincare products. Therefore, this method could be an alternative for mercuric toxic control in other sample applications.

Detection of heavy metal ions using laser-induced breakdown spectroscopy combined with filter paper modified with PtAg bimetallic nanoparticles

The rapid and sensitive detection of heavy metal ions is important for environment and human health. Hence, the rapid and sensitive detection of multiple heavy metals simultaneously has become a critical issue. Here, we propose a method based on laser-induced breakdown spectroscopy (LIBS) combined with filter paper modified with PtAg bimetallic nanoparticles (BNPs) (LIBS-FP-PtAgBNPs) for the ultrasensitive detection of Hg²⁺, Cr³⁺, and Pb²⁺. The PtAgBNPs-modified filter paper was used to efficiently and specifically adsorb Hg, Cr, and Pb, and LIBS was used to detect the Hg, Cr, and Pb simultaneously. The limits of detection for Hg, Cr, and Pb were 0.5 μg/L (2.5 nM), 8 μg/L (0.15 μM), and 2 μg/L (9 nM), respectively. Furthermore, this method was successfully applied to determine the concentrations of Hg, Cr, and Pb in real spiked water samples. Compared with other methods based on nanoparticle sensing, LIBS-FP-PtAgBNPs is simpler to use and can achieve highly efficient enrichment, rapid separation, and sensitive detection of heavy metal ions. The optimal detections of Hg, Cr, and Pb were achieved in the pH range of 1-6. The developed method provides a new avenue to realize the rapid and sensitive detection of trace heavy metals in the environment.

A fluorescent assay for sensitive detection of kanamycin by split aptamers and DNA-based copper/silver nanoclusters

Kanamycin was a group of essential antibiotics generally served in treating infections of animals which leached into the environment residual in food, causing health concerns. Thus, selective and sensitive monitoring of kanamycin was significant for food safety. In this work, split aptamers were used as templates to prepare fluorescent Cu/Ag NCs for detection of kanamycin. According to the impressive affinity of the aptamer to kanamycin, two different detection modes were designed using kanamycin aptamer as a recognition molecule, in which one was to combine split aptamer Apt-1 with Apt-2 to form an entangled DNA as a Cu/Ag NCs template, the other was to associate the normal aptamer after encirclement to form Cu/Ag NCs templates. After the addition of kanamycin, the fluorescence signals of the Cu/Ag NCs synthesized in the two modes were both enhanced, but the approach with split aptamer exhibited a superior observable sensitivity than that of the normal type. The detection range showed a well linear relationship between 80 nM and 10 μM when the emission wavelength was 560 nm, and the detection limit was 13.3 nM. In addition, when streptomycin, oxytetracycline, chloramphenicol and chlortetracycline were involved in the selective interference experiment under the same conditions, the fluorescence intensity of the system performed no significant changes. The results demonstrated that this method possessed favorable specificity and selectivity for the assay of kanamycin, proficiently achieving efficient, rapid and sensitive evaluation of kanamycin in the milk samples.

Recent advances in nanomaterials-based optical sensors for detection of various biomarkers (inorganic species, organic and biomolecules)

This review briefly emphasizes the different detection approaches (electrochemical sensors, chemiluminescence, surface-enhanced Raman scattering), functional nanostructure materials (quantum dots, metal nanoparticles, metal nanoclusters, magnetic nanomaterials, metal oxide nanoparticles, polymer-based nanomaterials, and carbonaceous nanomaterials) and detection mechanisms. Further, this review emphasis on the integration of functional nanomaterials with optical spectroscopic techniques for the identification of various biomarkers (nucleic acids, glucose, uric acid, oxytocin, dopamine, ascorbic acid, bilirubin, spermine, serotonin, thiocyanate, Pb²⁺ , Cu²⁺ , Hg²⁺ , F^- , peptides, and cancer biomarkers (mucin 1, prostate specific antigen, carcinoembryonic antigen, CA15-3, human epidermal growth factor receptor 2, C-reactive protein, and interleukin-6). Analytical characteristics of nanomaterials-based optical sensors are summarized in Tables, providing the insights of nanomaterials-based optical sensors for biomarkers detection. Finally, the opportunities and challenges of nanomaterials-based optical analytical approaches for the detection of various biomarkers (inorganic, organic, biomolecules, peptides and proteins) are discussed.

A dual-channel visual sensing system for recognition of multiple metal ions

Here, we propose a simple, rapid, and effective colorimetric sensor array for discrimination of metal ions. The sensor array was constructed using two sensing channels, i.e., gold nanoparticles (AuNPs)- Tetramethylbenzidine (TMB)-H₂O₂ and AuNPs-O-phenylenediamine (OPD)-H₂O₂ reaction systems. The presence of metal ions with positive charges would lead to the corresponding surface charge change of negatively charged AuNPs, resulting in diverse catalytic performances of citrate-modified AuNPs, accompanied by a substantial colorimetric performance of oxidation products of TMB and OPD. Employing the diversity of colorimetric responses of metal ions to the two sensing channels, nine metal ions including Cr³⁺, Fe³⁺, Cu²⁺, Co²⁺, Ni²⁺, Pb²⁺, Mg²⁺, K⁺, and Cd²⁺ were well distinguished with a discrimination accuracy of 100% at a concentration as low as 50 nM. Further experiment showed that the sensor array was also capable of discriminating and quantifying metal ions at various concentrations, as well as the identification of metal ion mixtures. The feasibility of the sensor array was also verified by the successful identification of the nine metal ions in river water samples.

Probing the Interaction of Heavy and Transition Metal Ions with Silver Nanoparticles Decorated on Graphene Quantum Dots by Spectroscopic and Microscopic Methods

We report a comprehensive study of the interaction of transition and heavy metal ions with graphene quantum dots-capped silver nanoparticles (AgGQDs) using different spectroscopic and microscopic techniques. High-resolution transmission electron microscopy studies show that the interaction of metal ions with AgGQDs leads to the formation of metal oxides, the formation of zerovalent metals, and the aggregation of Ag nanoparticles (AgNPs). The metal ions may interact with AgGQDs through selective coordination with -OH and -COOH functionalities, adsorption on the graphene moiety, and directly to AgNPs. For instance, the interaction of Cd²⁺ with AgGQDs altered the spherical shape of AgNPs into a chain-like structure. On the contrary, the formation of PbO is observed after the addition of Pb²⁺ to AgGQDs. Interestingly, the interaction of AgGQDs with Hg²⁺ results in the complete dissolution of Ag⁰ from the surface of GQDs and subsequent deposition of Hg⁰ on the graphene moiety of GQDs. Unlike transition metal ions, Cd²⁺, Pb²⁺, and Hg²⁺ can adsorb strongly on the graphene surface at the bridge, hollow, and top sites, respectively. This special interaction of heavy metal ions with the graphene surface would decide the mechanistic pathway in which the reaction proceeds. The transition metal ions Cu²⁺, Zn²⁺, Co³⁺, Mn²⁺, Ni²⁺, and Fe³⁺ induced the aggregation of AgNPs.

An Overview for the Nanoparticles-Based Quantitative Lateral Flow Assay

The development of the lateral flow assay (LFA) has received much attention in both academia and industry because of their broad applications to food safety, environmental monitoring, clinical diagnosis, and so forth. The user friendliness, low cost, and easy operation are the most attractive advantages of the LFA. In recent years, quantitative detection has become another focus of LFA development. Here, the most recent studies of quantitative LFAs are reviewed. First, the principles and corresponding formats of quantitative LFAs are introduced. In the biomaterial and nanomaterial sections, the detection, capture, and signal amplification biomolecules and the optical, fluorescent, luminescent, and magnetic labels used in LFAs are described. The invention of dedicated strip readers has drawn further interest in exploiting the better performance of LFAs. Therefore, next, the development of dedicated reader devices is described and the usefulness and specifications of these devices for LFAs are discussed. Finally, the applications of LFAs in the detection of metal ions, biotoxins, pathogenic microorganisms, veterinary drugs, and pesticides in the fields of food safety and environmental health and the detection of nucleic acids, biomarkers, and viruses in clinical analyses are summarized.

Mercaptosuccinic-Acid-Functionalized Gold Nanoparticles for Highly Sensitive Colorimetric Sensing of Fe(III) Ions

The development of reliable and highly sensitive methods for heavy metal detection is a critical task for protecting the environment and human health. In this study, a qualitative colorimetric sensor that used mercaptosuccinic-acid-functionalized gold nanoparticles (MSA-AuNPs) to detect trace amounts of Fe(III) ions was developed. MSA-AuNPs were prepared using a one-step reaction, where mercaptosuccinic acid (MSA) was used for both stabilization, which was provided by the presence of two carboxyl groups, and functionalization of the gold nanoparticle (AuNP) surface. The chelating properties of MSA in the presence of Fe(III) ions and the concentration-dependent aggregation of AuNPs showed the effectiveness of MSA-AuNPs as a sensing probe with the use of an absorbance ratio of A530/A650 as an analytical signal in the developed qualitative assay. Furthermore, the obvious Fe(III)-dependent change in the color of the MSA-AuNP solution from red to gray-blue made it possible to visually assess the metal content in a concentration above the detection limit with an assay time of less than 1 min. The detection limit that was achieved (23 ng/mL) using the proposed colorimetric sensor is more than 10 times lower than the maximum allowable concentration for drinking water defined by the World Health Organization (WHO). The MSA-AuNPs were successfully applied for Fe(III) determination in tap, spring, and drinking water, with a recovery range from 89.6 to 126%. Thus, the practicality of the MSA-AuNP-based sensor and its potential for detecting Fe(III) in real water samples were confirmed by the rapidity of testing and its high sensitivity and selectivity in the presence of competing metal ions.

Advances in aptamer screening and aptasensors' detection of heavy metal ions

Heavy metal pollution has become more and more serious with industrial development and resource exploitation. Because heavy metal ions are difficult to be biodegraded, they accumulate in the human body and cause serious threat to human health. However, the conventional methods to detect heavy metal ions are more strictly to the requirements by detection equipment, sample pretreatment, experimental environment, etc. Aptasensor has the advantages of strong specificity, high sensitivity and simple preparation to detect small molecules, which provides a new direction platform in the detection of heavy metal ions. This paper reviews the selection of aptamers as target for heavy metal ions since the 21th century and aptasensors application for detection of heavy metal ions that were reported in the past five years. Firstly, the selection methods for aptamers with high specificity and high affinity are introduced. Construction methods and research progress on sensor based aptamers as recognition element are also introduced systematically. Finally, the challenges and future opportunities of aptasensors in detecting heavy metal ions are discussed.

Fluorescent pattern recognition of metal ions by nanoparticles of bovine serum albumin as a chemical nose/tongue

A sensor array mimicking a chemical nose/tongue based on bovine serum albumin nanoparticles (BSANsn) has been developed for the fluorescence pattern recognition of metal ions in biofluids. Three types of BSANsn (BSANs10, BSANs20, and BSANs40) show the same excitation/emission peak at 478/526 nm. According to the differential fluorescence variation, the sensor array shows particular fluorescence response patterns depending upon metal ions. Upon principal component analysis (PCA), it was found that the sensor array can distinguish 18 metal ions clearly at a concentration of as low as 10 μM. Moreover, different concentrations of metal ions and mixed metal ions of diverse kinds or valence states can be differentiated by the sensor in biofluids. In addition, the results were well consistent with those obtained with the traditional ICP-AES method.

Effect of amines on formation of gold/polyurethane foam nanocomposites and its sensing opportunities

Effect of amines on formation of gold nanoparticles (AuNPs)/polymer nanocomposites has been observed and studied. Nanocomposites based on polyurethane foam and AuNPs were synthesized by interaction between the polymer modified with sodium borohydride and aqueous solution of tetrachloroauric acid. It has been shown that some amines cause a remarkable decrease of the surface plasmon resonance band of AuNPs in the nanocomposite material. Both aliphatic and aromatic amines as well as amines containing several amino groups were studied. A possible mechanism of the effect is discussed. It is probably based on stabilization of AuNPs with an amine that entails a decrease in the degree of their adsorption on PUF and appearance of the stabilized AuNPs in solution. The decrease of the nanocomposite surface plasmon resonance band is proportional to the concentration of amine in the solution. Based on this effect, a method for the determination of cetylamine, β-naphthylamine and neomycin in water and medical formulations using a monitor calibrator as a portable household tool is proposed. Under the selected conditions, the detection limits for amines were in the range of 0.7-1.5 μM, the determination ranges were approximately an order of magnitude. The observed color change of the nanocomposite samples also provides a good basis for semiquantitative determinations.

A Facile Aptasensor for Instantaneous Determination of Cadmium Ions Based on Fluorescence Amplification Effect of MOPS on FAM-Labeled Aptamer

Analytical performance and efficiency are two pivotal issues for developing an on-site and real-time aptasensor for cadmium (Cd²⁺) determination. However, suffering from redundant preparations, fabrications, and incubation, most of them fail to well satisfy the requirements. In this work, we found that fluorescence intensity of 6-carboxyfluorescein(FAM)-labeled aptamer (FAM-aptamer) could be remarkably amplified by 3-(N-morpholino)propane sulfonic acid (MOPS), then fell proportionally as Cd²⁺ concentration introduced. Importantly, the fluorescence variation occurred immediately after addition of Cd²⁺, and would keep stable for at least 60 min. Based on the discovery, a facile and ultra-efficient aptasensor for Cd²⁺ determination was successfully developed. The sensing mechanism was confirmed by fluorescence pattern, circular dichroism (CD) and intermolecular interaction related to pK_a. Under the optimal conditions, Cd²⁺ could be determined rapidly from 5 to 4000 ng mL^-1. The detection limit (1.92 ng mL^-1) was also lower than the concentration limit for drinking water set by WHO and EPA (3 and 5 ng mL^-1, respectively). More than a widely used buffer, MOPS was firstly revealed to have fluorescence amplification effect on FAM-aptamer upon a given context. Despite being sensitive to pH, this simple, high-performance and ultra-efficient aptasensor would be practical for on-site and real-time monitoring of Cd²⁺.

Nanomaterial-based fluorescent sensors for the detection of lead ions

Lead (Pb) poisoning has been a scourge to the human to pose sighnificant health risks (e.g., organ disorders, carcinogenicity, and genotoxicity) as observed from many different parts of the world, especially in developing countries. The demand for accurate sensors for its detection, especially in environmental media (soil, water, food, etc.) has hence been growing steadily over the years. The potential utility of fluorescent nanosensors as an important analytical tool is recognized due to their astonishing characteristics (e.g., high sensitivity/selectivity, enhanced detection performance, low cost, portability, and rapid on-site detection ability). This review is organized to offer insight into the recent developments in fluorescent nanosensing technology for the detection of lead ions (Pb²⁺). To this end, different types of nanomaterials explored for such applications have been classified and evaluated with respect to performance, especially in terms of sensitivity. This review will help researchers gain a better knowledge on the status and importance of optical nanosensors so as to remediate the contamination of lead and associated problems. The technical challenges and prospects in the development of nanosensing systems for Pb²⁺ are also discussed.

Combination of phenylboronic acid and oligocytosine for selective and specific detection of lead(ii) by lateral flow test strip

Detection of lead (II) in water sources is of high importance for protection from this toxic contaminant. This paper presents the development and approbation of a lateral flow test strip of lead (II) with the use of phenylboronic acid as chelating agent and oligocytosine chain as receptor for the formed complexes. To locate the bound lead (II) on the test strip, phenylboronic acid was conjugated with carrier protein (bovine serum albumin) and applied as a binding line. In turn, the oligocytosine was conjugated with gold nanoparticle to provide coloration of the finally formed complexes (bovine serum albumin - phenylboronic acid - lead (II) - oligocytosine - gold nanoparticle). This combination of two binding molecules provides the «sandwich » assay with direct dependence of label binding from the analyte content. The technique is characterized by high sensitivity (0.05 ng mL^-1) and the absence of cross-reactions with other metal ions which are often satellite in natural waters. The developed lateral flow tests were successfully applied for lead (II) detection in water. Time of the assay was 5 min. The reached parameters confirm efficiency of the proposed technique for rapid and non-laborious testing under nonlaboratory conditions.

Fabrication of fluorescent hybrid nanomaterials based on carbon dots and its applications for improving the selective detection of Fe (III) in different matrices and cellular imaging

Considering that detection on cations or ions still meets some challenges in achieving the effectivity and selectivity just by employing one platform, the ingenious fabrication of nanomaterials exhibits an increasing research interests for the preponderance in improving or integrating the performance of single platform. Herein, a fluorescent hybrid nanomaterials based on an organic dye 4-methylumbelliferone (4-MU) as modifier and D-arginine as carbon cores has been developed via a facile one-step hydrothermal synthesis, forming carbon dots (CDs)/4-MU hybrid nanomaterials (CDs-4-MU). This kind of nanomaterials can improve the sensitive and selective detection of single CDs towards Fe³⁺ ions in different matrices. The detection mechanism of CDs-4-MU towards Fe³⁺ can be attributed to an electron transfer process between CDs-4-MU and Fe³⁺, leading to the fluorescence quenching. The limit of detection (LOD) and corresponding linear range in tris-HCl buffer solution are 0.68 μM and 2.29-200 μM, respectively. Furthermore, this nanomaterial can also achieve a detection of Fe³⁺ ions in real samples such as tap water, culture medium and fetal bovine serum. In particular, CDs-4-MU exhibits a good biocompatibility and can be uptaken by MC3T3 cells, thus can be applied for Fe³⁺ ions detection in cellular level and cellular imaging. Therefore, this work provides a versatile strategy for the synthesis of CDs-based hybrid nanomaterials and opens a new pathway for improving the ion detection in real samples, which is of significance in practical applications.

A 3×3 visible-light cross-reactive sensor array based on the nanoaggregation of curcumin in different pH and buffers for the multivariate identification and quantification of metal ions

Here, a facilely constructed 3 × 3 visible-light cross reactive sensor array based on nanoaggregation of curcumin (Cur) is proposed for the identification and quantification of metal ions (MIs). Synthesis of nanocurcumin (NCur) was characterized by UV-Vis spectrophotometry, transmission electron microscopy (TEM) and Fourier transform infrared (FT-IR). The average particle size was estimated about 5.21 ± 1.13 nm) n = 50 (. Our sensor array consists of nine receptors with distinct but overlapping specificities for 11 MIs: Al³⁺, Cd²⁺, Co²⁺, Cu²⁺, Hg²⁺, Fe²⁺, Fe³⁺, Mn²⁺, Ni²⁺, Pb²⁺, and Zn²⁺. The receptors include the nine solutions of NCur at three buffers of phosphate, ammonium, and tris each at three pH of 7, 8, and 9 (in total 9 receptors). On account of different pH and buffers, NCur-MI binding affinities can be distinguished by monitoring the UV-Vis absorbance changes. These changes are optical fingerprints that can be used to identify each MI. The absorption values in sixteen wavelengths (i.e. 332, 352, 372, 392, 412, 432, 452, 472, 492, 512, 532, 552, 572, 592, 612, and 632 nm) are considered as analytical signals to quantitatively evaluate of the absorbance responses of the sensor array. A color difference map is provided to qualitatively visualize of the colorimetric sensor array responses. Under optimal conditions, the MIs are successfully discriminated in the range of 4-48 μmol L^-1. The limit of detections (LODs) values ranged from 0.47 (for Fe³⁺) to 1.40 μmol L^-1 (for Pb²⁺). Furthermore, two different mixing sets of the MIs are prepared for multivariate multicomponent analysis. Finally, the suggested sensor array is employed to evaluate its practicability in the discrimination of MIs in samples of river water and serum. Moreover, it can identify the MIs in these samples. The sensor array presents a simple, save time, cost-effective, and environmentally friendly method for the identification and quantification of MIs.

Limitations for colorimetric aggregation assay of metal ions and ways of their overcoming

The development of analytical methods for the determination of metal ions in water is one of the priority tasks for efficient environmental monitoring. The use of modified gold nanoparticles and the colorimetric detection of their aggregation initiated by ions binding with specific receptors on the nanoparticle surface has high potential for simple testing. However, the limits of this approach and the parameters determining the assay sensitivity are not clear, and the possibilities of different assay formats are estimated only empirically. We have proposed a mathematical description of the aggregation processes in the assay and have estimated the detection limits of an aptamer-based assay of Pb2+ ions theoretically and experimentally. In the studied assay, gold nanoparticles modified with G,T-enriched aptamer were used, and their aggregation caused by the interaction with Pb2+ ions was controlled via a color change. The experimentally determined limit of Pb2+ detection was 700 ppb, which was in good agreement with theoretical calculations. An examination of the model showed that the limiting parameter of the assay is the binding constant of the aptamer-Pb2+ ion interaction. To overcome this limitation without searching for alternate receptors, two methods have been proposed, namely additional aggregation-causing components or centrifugation. These approaches lowered the detection limit to 150 ppb and even to 0.4 ppb. The second value accords with regulatory demands for the permissible levels of water source contamination, and the corresponding approach has significant competitive potential due to its rapidity, simple implementation, and the visual assessment of the assay results.

l-Cysteine modified silver nanoparticles-based colorimetric sensing for the sensitive determination of Hg2+ in aqueous solutions

A simple and sensitive colorimetric sensing method was constructed for detection of Hg²⁺ in aqueous solutions and based on silver nanoparticles functionalized with l-cysteine (l-Cys-Ag NPs). In this method, adenosine triphosphate (ATP) induced aggregation of l-Cys-Ag NPs. Simultaneously, the solution colour changed from bright yellow to brown. In the presence of Hg²⁺ , Hg²⁺ chelated ATP to form a complex and reduce the degree of aggregation of l-Cys-Ag NPs and was accompanied by a colour change from brown to bright yellow. The changing values of absorbance at 390 nm were linearly correlated with concentration of Hg²⁺ over the 4.00 × 10^-8 to 1.04 × 10^-6 mol·L^-1 range, with a detection limit of 8 nM. This method was used successfully for detection of Hg²⁺ in real water samples and performed good selectivity and sensitivity. The recovery range was 91.5-109.1%, indicating that the method has vast application potential for determination of Hg²⁺ in the environment.

Low-cost, disposable colourimetric sensors for metal ions detection

In this work, two colourimetric sensors for metal ions detection are presented. The devices are obtained by fixing two classical dyes, Eriochrome Black T (EBT) and 1-(2-pyridylazo)-2-naphthol (PAN), on the commercial paper sheet “Colour Catcher®” (here named under the acronym CC) generally used in the washing machine to prevent colour run problems. The devices are optical sensors, since the indicator dye, fixed on the solid material, changes its spectral properties (colour and hence UV-vis spectrum) upon contact with the metal ion solution. We used the partial least squares (PLS) regression for obtaining the relationship between the metal ion content and the UV-vis spectrum change of each sensor.

Turning Spent Coffee Grounds into Sustainable Precursors for the Fabrication of Carbon Dots

Spent coffee grounds (SCGs) are known for containing many organic compounds of interest, including carbohydrates, lipids, phenolic compounds and proteins. Therefore, we investigated them as a potential source to obtain carbon dots (CDs) via a nanotechnology approach. Herein, a comparison was performed between CDs produced by SCGs and classic precursors (e.g., citric acid and urea). The SCG-based CDs were obtained via the one-pot and solvent-free carbonization of solid samples, generating nanosized particles (2.1-3.9 nm). These nanoparticles exhibited a blue fluorescence with moderate quantum yields (2.9-5.8%) and an excitation-dependent emission characteristic of carbon dots. SCG-based CDs showed potential as environmentally relevant fluorescent probes for Fe3+ in water. More importantly, life cycle assessment studies validated the production of CDs from SCG samples as a more environmentally sustainable route, as compared to those using classic reported precursors, when considering either a weight- or a function-based functional unit.

Quantum dot (QD)-based probes for multiplexed determination of heavy metal ions

Heavy metal contamination is a major global concern and additive toxicity resulting from the exposure to multiple heavy metal ions is more pronounced than that induced by a single metal species. Quantum dots (QDs) have demonstrated unique properties as sensing materials for heavy metal ions over the past two decades. With the rapid development and deep understanding on determination of single heavy metal ion using QD probes, this technology has been employed for sensing multiple metal ions. This review (with 97 refs.) summarizes the progress made in recent years in methods for multiplexed determination of heavy metal ions using QDs. Following an introduction into the importance of simultaneous quantitation of multiple heavy metal ions in environmentally relevant settings, the review discusses the applications of different types of QDs, i.e. chalcogenide, carbon, polymer and graphene in this field. Determination strategies based on fluorometric, colorimetric and electrochemical responses were reviewed including the testing mechanisms and differentiation between various metal ions. In addition, current state of the art sensor constructions, i.e. immobilization of QDs on solid substrate and sensor arrays have been highlighted. A concluding section describes the limitations, opportunities and future challenges of the QD probes. We also compiled a comprehensive table of currently available literature. The listed papers provided information in the following categories, i.e. type of QDs used, ligands or other components in the probe, metal ions tested, medium/substrate of the probe, transduction methods, discrimination mechanism, limit of detection (LOD) and concentration range. Graphic abstract.

Silica-anchored cadmium sulfide nanocrystals for the optical detection of copper(II)

A fluorometric assay was developed for the determination of copper(II) ion based on its quenching effect on the green fluorescent probe of SiO₂-anchored CdS nanocrystals (SiO₂/CdS NCs). The fluorescent probe was prepared by a surface ion-directing strategy for homogeneous precipitation of CdS NCs onto the carboxyl-capped SiO₂ core surfaces. In comparison to CdS NCs, the SiO₂/CdS NCs has strong fluorescence emission and good photostability. Moreover, SiO₂/CdS NCs show higher fluorescence selectivity for copper(II) ions than for other common metal ions because copper(II) ions have a strong fluorescence quenching effect on SiO₂/CdS NCs. At excitation/emission wavelengths of 300/516 nm, the resulting fluorescent probe shows wide linear ranges from 0.01 to 2 μM with a detection limit of 6.3 nM for copper(II) ions. The method has been applied to the determination of trace copper(II) ions in tea infusions with satisfactory results. Graphical abstract.

Development of a Nanoparticle-based Lateral Flow Strip Biosensor for Visual Detection of Whole Nervous Necrosis Virus Particles

Effective analysis of pathogens causing human and veterinary diseases demands rapid, specific and sensitive detection methods which can be applied in research laboratory setups and in field for routine diagnosis. Paper lateral flow biosensors (LFBs) have been established as attractive tools for such analytical applications. In the present study a prototype LFB was designed for whole particles (virions) detection of nodavirus or fish nervous necrosis virus. Nodavirus is an important threat in the aquaculture industry, causing severe economic losses and environmental problems. The LFB was based on polyclonal antibodies conjugated on gold nanoparticles for signal visualization. Brain and retinas from fish samples were homogenized, centrifuged and the supernatant was directly applied on the LFB. Formation of a red test line was indicative of nodavirus virions presence. Nodavirus visual detection was completed in short time (30 min). Key factors of the LFB development influencing the assays’ detection limit were characterized and the optimum parameters were determined, enabling increased efficiency, excluding non-specific interactions. Therefore, the proposed LFB assay consists a robust, simple, low cost and accurate method for detection of nodavirus virions in fish samples. The proposed biosensor is ideal for development of a commercial kit to be used on aquaculture facilities by fish farmers. It is anticipated that disease monitoring and environmental safety will benefit from the simplification of time consuming and costly procedures.

Novel Fusion Protein Consisting of Metallothionein, Cellulose Binding Module, and Superfolder GFP for Lead Removal from the Water Decoction of Traditional Chinese Medicine

Many methods have been used to detect heavy metals in herbal medicines, while few are developed to remove them. In this study, a novel genetically engineered fusion protein composed of metallothionein (MT), cellulose binding module (CBM), and superfolder GFP (sfGFP) was designed to remove heavy metals. MT, a kind of cysteine-rich protein, was used to chelate heavy metals with high specific affinity. The CBM facilitated the fusion protein MT-CBM-sfGFP binding to cellulose specifically, which made the purification and immobilization in one step. The sfGFP was used to detect the fusion protein MT-CBM-sfGFP easily during the process of expression and immobilization. The MT from Cancer pagurus (MTCap) and the CBM from Cellulomonas fimi (CBMCef) were used as an example and the fusion protein (MTCap-CBMCef-sfGFP) was expressed in Escherichia coli. Then, the cell lysates were mechanically mixed with cellulose to create biosorbent MTCap-CBMCef-sfGFP@cellulose. The efficiency of the biosorbent MTCap-CBMCef-sfGFP@cellulose for Pb2+ removal was evaluated using the water decoction of Honeysuckle as a model. Results suggested that MTCap-CBMCef-sfGFP@cellulose had high efficiency for Pb2+ removal from the water decoction of Honeysuckle without affecting its active ingredients. The low-cost, easy production, and high efficiency of the biosorbent enable it to have many applications in heavy metal removal from aqueous solutions of herbal medicines and food.

Preparation of "Ion-Imprinting" Difunctional Magnetic Fluorescent Nanohybrid and Its Application to Detect Cadmium Ions

In this work, we have fabricated a novel difunctional magnetic fluorescent nanohybrid (DMFN) for the determination of cadmium ions (Cd²⁺) in water samples, where the “off-on” model and “ion-imprinting” technique were incorporated simultaneously. The DMFN were composed of CdTe/CdS core-shell quantum dots (QD) covalently linked onto the surface of polystyrene magnetic microspheres (PMM) and characterized using ultraviolet-visible spectroscopy (UV-Vis), fluorescence spectroscopy, and transmission electron microscopy (TEM). Based on the favorable magnetic and fluorescent properties of the DMFN, the chemical etching of ethylene diamine tetraacetic acid (EDTA) at the surface produced specific Cd²⁺ recognition sites and quenched the red fluorescence of outer CdTe/CdS QD. Under optimal determination conditions, such as EDTA concentration, pH, and interfering ions, the working curve of determining Cd²⁺ was obtained; the equation was obtained Y = 34,759X + 254,894 (R = 0.9863) with a line range 0.05–8 μM, and the detection limit was 0.01 μM. Results showed that synthesized magnetic fluorescent microspheres had high sensitivity, selectivity, and reusability in detection. Moreover, they have significant potential value in fields such as biomedicine, analytical chemistry, ion detection, and fluorescence labeling.

A Mechanism of Gold Nanoparticle Aggregation by Immunoglobulin G Preparation

Conjugates of gold nanoparticles (GNPs) and antibodies are widely used in various fields of biochemistry and microbiology. However, the procedure for obtaining such conjugates remains precarious, and the properties of conjugates differ significantly for different antibody clones. One of the most common problems is the aggregation of GNPs in the course of their conjugation with antibodies. This article considers an example of the conjugation of monoclonal antibodies with non-stable aggregating product. The composition of the antibody preparation was studied using electrophoresis, asymmetrical flow field-flow fractionation, and ultracentrifugation. It was shown that the component that causes the aggregation of the GNPs is the light chains of immunoglobulins that appear due to the spontaneous decay of the antibodies. After separation of the fraction with a molecular weight of less than 30 kDa, stable conjugates of antibodies with GNPs were obtained. The high functional activity of the obtained conjugates was confirmed by immunochromatography.

Oligonucleotide-induced regulation of the oxidase-mimicking activity of octahedral Mn3O4 nanoparticles for colorimetric detection of heavy metals

A colorimetric assay for the determination of heavy metal ions is presented that is based on the regulation of the oxidase-mimicking activity of Mn₃O₄ nanoparticles (NPs) by oligonucleotides. The chromogenic agent tetramethylbenzidine (TMB) is oxidized by the catalytic action of Mn₃O₄ NPs to generate products that have a yellow color in acidic solution, with a peak at 450 nm. It is found that random oligonucleotides are absorbed on the regular surface of the Mn₃O₄ NPs and temporarily inhibit the oxidation of TMB. This leads to a decrease in absorbance and a light-green coloration of the solution. The results show that the purine bases in oligonucleotides play a key role in their regulation of the activity of the NPs. The regulatory effect is assumed to be of the noncompetitive type. In the presence of heavy metal ions like Hg(II) or Cd(II), the inhibition is canceled due to the binding of heavy metal ions to thymine bases, and the color of the solution changes from light green to yellow. The increase in absorbance at 450 nm is related to the amount of heavy metal ions present. The method allows Hg(II) and Cd(II) to be determined visually in concentrations as low as 20 μg·L^-1. The detection limit of the colorimetric assay is 3.8 and 2.4 μg·L^-1 of Hg(II) and Cd(II), respectively. The assay displays good selectivity over other heavy metal ions. The method was successfully validated by analyzing several water samples. Graphical abstract Schematic representation of the colorimetric assay for Hg(II) and Cd(II) based on the intrinsic oxidase-mimicking activity of Mn₃O₄ nanoparticles that is regulated by oligonucleotides.

Colorimetric Technique for Antimony Detection Based on the Use of Gold Nanoparticles Conjugated with Poly-A Oligonucleotide

A simple and rapid positive–negative colorimetric approach to determine the presence of antimony ions based on the use of gold nanoparticles conjugated with oligonucleotide (poly-A sequence) is developed. Colorimetric measurements reveal that the aggregates of modified gold nanoparticles were afforded after adding antimony ions, thus changing the solution color from pink to blue. The results of aptamer’s interaction on the gold nanoparticle surface with the target analyte can be detected either by photometry or by the naked eye. The realized assay provides rapid (2 min), sensitive (detection limit 10 ng/mL), specific, and precise (variation coefficient less than 3.8%) detection of antimony (III) in drinking water.

Fluorometric determination of microRNA using arched probe-mediated isothermal exponential amplification combined with DNA-templated silver nanoclusters

A highly sensitive fluorometric method is described for the determination of microRNA-141. It is based on the use of arched probe-mediated isothermal exponential amplification reaction (EXPAR) and of DNA-templated silver nanoclusters (DNA-AgNCs). The EXPAR utilizes microRNA-141 as the trigger, polymerases and endonucleases as amplification activators, and two arched probes as exponential amplification templates. This enables the conversion of microRNA to a large number of reporter sequences under isothermal conditions within minutes. The generated reporter sequences act as scaffolds for the synthesis of fluorescent DNA-AgNCs by reduction of Ag (I) with NaBH₄. The DNA-AgNCs function as signalling fluorophores with excitation/emission maxima at 540/610 nm. The method exhibits high sensitivity for microRNA-141 with a detection limit as low as 0.87 fM and a dynamic range from 1 fM to 500 fM. The method can distinguish nucleotides in the microRNA-200 family. Graphical abstract Schematic representation of a fluorometric method for sensitive detection of microRNA based on arched probe-mediated isothermal exponential amplification combined with DNA-templated silver nanoclusters.

Colorimetric determination of copper(II) by using branched-polyethylenimine droplet evaporation on a superhydrophilic-superhydrophobic micropatterned surface

A colorimetric method is described for the determination of Cu(II). It is based on branched polyethylenimine (BPEI) droplet evaporation on a superhydrophilic-superhydrophobic polystyrene micropatterned surface. Exposure to Cu(II) leads to a color change from colorless to light blue and dark blue. The micropatterned surface was fabricated via combining electrospinning with oxygen plasma and served as a detection substrate. Analysis requires only a single drop of blood. The method has a linear response in the 5.0 μM to 2.5 mM Cu(II) concentration range which is within the physiological range (15.7 ∼ 23.6 μM). Compared to an assay in solution, the detection limit is decreased from 386 nM to 89 nM. Excellent selectivity over other metal ions and anions was achieved. Graphical abstract A rapid and sensitive colorimetric detection platform for Cu(II) was fabricated by using branched-polyethylenimine droplet evaporation on a superhydrophilic-superhydrophobic micropatterned surface. Only a single drop of blood was needed for the analysis. The sensitivity was improved about 4.3 times.

Gold and silver nanoparticles in resonance Rayleigh scattering techniques for chemical sensing and biosensing: a review

This review (with 116 refs.) summarizes the state of the art in resonance Rayleigh scattering (RRS)-based analytical methods. Following an introduction into the fundamentals of RRS and on the preparation of metal nanoparticles, a first large section covers RRS detection methods based on the use of gold nanoparticles, with subsections on proteins (albumin, bovine serum albumin and ovalbumin, glycoproteins, folate receptors, iron binding-proteins, G-proteins-coupled receptors, transmembrane proteins, epidermal growth factor receptors), on pesticides, saccharides, vitamins, heavy metal ions (such as mercury, silver, chromium), and on cationic dyes. This is followed by a section on RRS methods based on the use of silver nanoparticles, with subsections on the detection of nucleic acids and insecticides. Several Tables are presented where an RRS method is compared to the performance of other methods. A concluding section summarizes the current status, addresses current challenges, and gives an outlook on potential future trends. Graphical Abstract Change in the resonance Rayleigh scattering (RRS) intensity when mixing the nanoparticles with the specific analyte.

A novel and ultrasensitive yellow to taupe brown colorimetric sensing and removal method for Hg(ii) based on the thermosensitive poly(N-isopropyl acrylamide) stabilized silver nanoparticles

AgNP/PNIPAm was developed as a dual-functional colorimetric probe and removal system for Hg²⁺.