Preparation of deep eutectic solvent-based hexagonal boron nitride-molecularly imprinted polymer nanoparticles for solid phase extraction of flavonoids

Recent advances in methods of extraction, pre-concentration, purification, identification, and quantification of kaempferol

As a naturally widely-occurring dietary, cosmetic, and therapeutic flavonoid, kaempferol has gained much consideration for its nutritional and pharmaceutical properties in recent years. Although there have been performed a high number of studies associated with different aspects of kaempferol's analytical investigations, the lack of a comprehensive summary of the various methods and other plant sources that have been reported for this compound is being felt, especially for many biological applications. This study, aimed to provide a detailed compilation consisting of sources (plant species) and analytical information that was precisely related to the natural flavonoid (kaempferol). There is a trend in analytical research that supports the application of modern eco-friendly instruments and methods. In conclusion, ultrasound-assisted extraction (UAE) is the most general advanced method used widely today for the extraction of kaempferol. During recent years, there is an increasing tendency towards the identification of kaempferol by different methods.

Advancing green extraction of bioactive compounds using deep eutectic solvent-based ultrasound-assisted matrix solid-phase dispersion: Application to UHPLC-PAD analysis of alkaloids and organic acids in Coptidis rhizoma

The utilization of deep eutectic solvents (DES) in sustainable extracting and separating of phytochemicals shows promising prospect. An exceptionally fast, eco-friendly, and sustainable approach was proposed for extracting bioactive compounds from Coptidis Rhizoma based on deep eutectic solvent-based ultrasound-assisted matrix solid phase dispersion (DES-UA-MSPD). Single-factor experiments and Box-Behnken design were utilized to explore the optimal extraction conditions. The analysis indicated that the acidic DES, especially betaine-acrylic acid (Bet-Aa 1:4 mol/mol) with 50% water content, was proved to be the most effective medium for the extraction of alkaloids (magnoflorine, groenlandicine, coptisine, epiberberine, berberine and palmatine) and organic acid (chlorogenic acid). With the parameters optimized, the total maximum extraction yield of alkaloids and organic acids reached 128.83 mg g-1 applying the optimal DES, which was 1.33-5.33 folds higher than conventional extraction solvents. Additionally, through microstructure analysis using scanning electron microscopy, density functional theory , and frontier molecular orbitals theory, a deeper understanding of the extraction principle was gained, and the molecular mechanism of DES synthesis and the interactions between target compounds were systematically elucidated. The sustainable and green potential of the DES-UA-MSPD method was demonstrated through Green Analytical Procedure Indexanalysis. The overall results of this investigation revealed that the proposed technology was a highly promising and sustainable alternative for effective extraction and quantification of natural products.

Emerging trends in sensors based on molecular imprinting technology: Harnessing smartphones for portable detection and recognition

Molecular imprinting technology (MIT) has become a promising recognition technology in various fields due to its specificity, high efficiency, stability and eco-friendliness in the recognition of target. Molecularly imprinted polymers (MIPs), known as 'artificial receptors', are shown similar properties to natural receptors as a biomimetic material. The selectivity of recognition for targets can be greatly improved when MIPs are introduced into sensors, as known that MIPs, are suitable for the pretreatment and analysis of trace substances in complex matrix samples. At present, various sensors has been developed by the combination with MIPs for detecting and identifying trace compounds, biological macromolecules or other substances, such as optical, electrochemical and piezoelectric sensors. Smart phones, with their built-in sensors and powerful digital imaging capabilities, provide a unique platform for the needs of portability and instant detection. MIP sensors based on smart phones are expected to become a new research direction in the future. This review discusses the latest applications of MIP sensors in the field of detection and recognition in recent years, summarizes the frontier progress of MIP sensor research based on smart phones in the past two years, and points out the challenges, limitations and future development prospects.

Facile and selective separation of anthraquinones by alizarin-modified iron oxide magnetic nanoparticles

Anthraquinones are widely distributed in higher plants and possess broad biological activities. The conventional separation procedures for isolating anthraquinones from the plant crude extracts require multiple extraction, concentration, and column chromatography steps. In this study, we synthesized three alizarin (AZ)-modified Fe₃O₄ nanoparticles (Fe₃O₄@AZ, Fe₃O₄@SiO₂-AZ, and Fe₃O₄@SiO₂-PEI-AZ) by thermal solubilization method. Fe₃O₄@SiO₂-PEI-AZ showed strong magnetic responsiveness, high methanol/water dispersion, good recyclability, and high loading capacity for anthraquinones. To evaluate the feasibility of using Fe₃O₄@SiO₂-PEI-AZ for separating various aromatic compounds, we employed molecular dynamics simulations to predict the adsorption/desorption effects of PEI-AZ for various aromatic compounds in different methanol concentrations. The results showed that the anthraquinones could be efficiently separated from the monocyclic and bicyclic aromatic compounds by adjusting the methanol/water ratio. The Fe₃O₄@SiO₂-PEI-AZ nanoparticles were then used to separate the anthraquinones from the rhubarb extract. At 5% methanol, all the anthraquinones were adsorbed by the nanoparticles, thus allowing their separation from other components in the crude extract. Compared with the conventional separation methods, this adsorption method has the advantages of high adsorption specificity, simple operation, and solvent saving. This method sheds light on the future application of functionalized Fe₃O₄ magnetic nanoparticles to selectively separate desired components from complex plant and microbial crude extracts.

Advances in Molecular Imprinting Technology for the Extraction and Detection of Quercetin in Plants

Quercetin is a kind of flavonoid compound, which has antioxidative, anti-aging and anti-cancer effects, so it is of great importance to study the efficient extraction and highly sensitive detection of quercetin. Molecular imprinting technology has remarkable selectivity and resistance to complex matrix interference, which is often used for extracting quercetin. The methods of molecular imprinted solid phase extraction, molecularly imprinted microsphere extraction, molecularly imprinted electrochemical sensor recognition and molecularly imprinted composite material extraction of quercetin from plant samples were discussed in detail. This review provides valuable information on efficient and sensitive methods for separating and purifying quercetin in plants. It also provides a technical reference for further investigation of the separation and analysis of active ingredients in natural products.

Preparation and Application of Molecularly Imprinted Polymers for Flavonoids: Review and Perspective

The separation and detection of flavonoids from various natural products have attracted increasing attention in the field of natural product research and development. Depending on the high specificity of molecularly imprinted polymers (MIPs), MIPs are proposed as efficient adsorbents for the selective extraction and separation of flavonoids from complex samples. At present, a comprehensive review article to summarize the separation and purification of flavonoids using molecular imprinting, and the employment of MIP-based sensors for the detection of flavonoids is still lacking. Here, we reviewed the general preparation methods of MIPs towards flavonoids, including bulk polymerization, precipitation polymerization, surface imprinting and emulsion polymerization. Additionally, a variety of applications of MIPs towards flavonoids are summarized, such as the different forms of MIP-based solid phase extraction (SPE) for the separation of flavonoids, and the MIP-based sensors for the detection of flavonoids. Finally, we discussed the advantages and disadvantages of the current synthetic methods for preparing MIPs of flavonoids and prospected the approaches for detecting flavonoids in the future. The purpose of this review is to provide helpful suggestions for the novel preparation methods of MIPs for the extraction of flavonoids and emerging applications of MIPs for the detection of flavonoids from natural products and biological samples.

Recent Advances in the Synthesis of Inorganic Materials Using Environmentally Friendly Media

Deep Eutectic Solvents have gained a lot of attention in the last few years because of their vast applicability in a large number of technological processes, the simplicity of their preparation and their high biocompatibility and harmlessness. One of the fields where DES prove to be particularly valuable is the synthesis and modification of inorganic materials-in particular, nanoparticles. In this field, the inherent structural inhomogeneity of DES results in a marked templating effect, which has led to an increasing number of studies focusing on exploiting these new reaction media to prepare nanomaterials. This review aims to provide a summary of the numerous and most recent achievements made in this area, reporting several examples of the newest mixtures obtained by mixing molecules originating from natural feedstocks, as well as linking them to the more consolidated methods that use "classical" DES, such as reline.

Remediation of pharmaceuticals from contaminated water by molecularly imprinted polymers: a review

The release of pharmaceuticals into the environment induces adverse effects on the metabolism of humans and other living species, calling for advanced remediation methods. Conventional removal methods are often non-selective and cause secondary contamination. These issues may be partly solved by the use of recently-developped adsorbents such as molecularly imprinted polymers. Here we review the synthesis and application of molecularly imprinted polymers for removing pharmaceuticals in water. Molecularly imprinted polymers are synthesized via several multiple-step polymerization methods. Molecularly imprinted polymers are potent adsorbents at the laboratory scale, yet their efficiency is limited by template leakage and polymer quality. Adsorption performance of multi-templated molecularly imprinted polymers depends on the design of wastewater treatment plants, pharmaceutical consumption patterns and the population serviced by these wastewater treatment plants.

Development of Green and Efficient Extraction Methods of Quercetin from Red Onion Scales Wastes Using Factorial Design for Method Optimization: A Comparative Study

Waste resulting from edible plants is considered one of the best sources of valuable phytochemicals. A promising approach for using these appreciated wastes is extracting precious medically important constituents, for example, free quercetin. Two new cost-effective and green extraction methods are introduced in the present study: ultrasound-assisted glycerol extraction (UAGE) and microwave-assisted extraction (MAE). These extraction protocols are optimized using factorial design to define the highest yield of extraction, and HPLC-UV at 370 nm was used as a method of yield analysis. Quercetin remained stable during the whole process in both extraction protocols. A standard addition technique was performed to quantify quercetin in different extracts and eliminate the matrix effect. In UAGE and MAE, extraction yields were 16.55 ± 0.81 and 27.20 ± 1.55 mg/1g from red onion scales on a dry base, respectively. The amount of quercetin extracted using MAE was superior to UAGE in terms of time and yield. A greenness assessment of the offered studies compared to previously published relevant extraction methods was performed using the analytical eco-scale assessment method (ESA) and national environmental methods index (NEMI). MAE showed to be a greener method with a higher ESA score and a greener NEMI pictogram.

Fast microwave-assisted synthesis of magnetic molecularly imprinted polymer for sulfamethoxazole

A fast and simple strategy based on the microwave technique for the preparation of magnetic molecularly imprinted polymers (MMIPs) is proposed for the selective determination of sulfamethoxazole (SMX). The MMIPs were synthesized at 70 °C in 20 min, being much faster than the conventional techniques. A computational approach based on density functional theory was used to design the MMIP and compare the two most used monomers in MIPs, including methacrylic acid (MAA) and acrylamide (AM). Then, two different MMIPs were prepared using AM and MAA as monomers. The resultant materials were characterized with X-ray diffraction, thermogravimetric analysis, scanning/transmission electron microscopy, and Fourier-transform infrared spectroscopy. Besides, the adsorption characterizations suggested that the adsorption of SMX followed the pseudo-second-order model in the kinetic study and the Sips model in the isotherm study. The experimental results corroborated the computational approach. Furthermore, Both MMIPs demonstrated good selectivity. The MMIP-AM and MMIP-MAA were applied as adsorbents in magnetic dispersive solid-phase extraction combined with UV-visible spectroscopy to quantify SMX. The obtained limits of detection and quantification were lower than 0.59 and 1.77 μM, respectively for both MMIPs. The sensitivity of both MMIPs was in the range of 0.021-0.023 (SI). Our findings revealed that there is no significant difference in the analytical parameters between MMIP-AM and MMIP-MAA. However, the application of both MMIPs in a real sample (tap water) showed that the recovery values of SMX obtained with MMIP-AM (68-70%) were lower than that with MMIP-MAA (80-90%) suggesting that MMIP-MAA is more appropriate for SMX determination.

Selective, sensitive, and miniaturized analytical method based on molecularly imprinted graphene oxide composites for the determination of naphthalene-derived plant growth regulators in apples

This paper reports a selective, sensitive, and miniaturized analytical method based on a molecularly imprinted graphene oxide (MIP-GO) composite as adsorbent for miniaturized tip solid-phase extraction (MTSPE) to determine naphthalene-derived plant growth regulators (PGRs) in apples. The proposed method combines the advantages of MIP-GOs (high selectivity), MTSPE (low consumption), and high-performance liquid chromatography-fluorescence detection (high sensitivity). Under optimized conditions, the method exhibited appreciable linearity (2.00-200 ng/g), low detection limits (0.21-0.53 ng/g), high accuracy (absolute recoveries: 87.6-99.5%), and high precision (relative standard deviations ≤ 3.0%), along with low consumption (0.5 mL sample solution and 2.0 mg adsorbent). In addition, the adsorption performance of the MIP-GO adsorbent did not decrease over ten months, highlighting the long storage and operational lifetime of the adsorbent. The proposed method was employed for the analysis of naphthalene-derived PGR residues in apples and exhibited promising potential for application in food safety analysis.

Synthesis of magnetic covalent organic framework molecularly imprinted polymers at room temperature: A novel imprinted strategy for thermo-sensitive substance

Molecularly imprinted polymers (MIPs) with specific selective recognition have shown excellent performance in the rapid and efficient separation and enrichment of targets in complex systems. Unfortunately, it is not suitable for thermosensitive substances with biological functions. To this end, an imine-linked MIPs with covalent organic frameworks and magnetic nanoparticles was developed by using a room temperature synthesis strategy for the purification of Cyaninin-3-O-glucoside (C3G) from black chokeberry. The prepared material recognized C3G through π-π interaction, assisted by hydrogen bond, and will not be disturbed by water environment. The adsorption capacity and equilibrium binding constant were 86.92 mg g^-1 and 1.46 L mg^-1, respectively. Based on this special structure, it can also act as a "protective umbrella" and improve the stability of C3G. Furthermore, it exhibited high selectivity compared with dummy template imprinting technique. After purification, the purity of C3G was obviously improved (from 11.96% to 84.72%). This work provided a new strategy for the selective separation of anthocyanin and a method to develop MIPs for thermosensitive substances.

Application of micro/nanomaterials in adsorption and sensing of active ingredients in traditional Chinese medicine

Traditional Chinese medicine (TCM) has been widely applied for the prevention and cure of various diseases for centuries. Ingredient with pharmacological activity is the key to the application of TCM. Hence, it is of significance to separate and detect active ingredients in TCM effectively. Micro/nanomaterial is the promising candidate for adsorption and sensing due to its unique physical and chemical properties. For years, many efforts have been made to develop functional micro/nanomaterials to realize the effective adsorption or sensing of bioactive compounds in TCM. In this review, we discussed recent progresses in the application of various functional micro/nanomaterials for adsorption or detection (electrochemical detection, fluorescent detection, and colorimetric detection) of active ingredients. Based on the kind of matrix materials, micro/nano-adsorbents or sensors can be classified into following categories: metal-based micro/nanomaterials, porous materials, carbon-based materials, graphene/graphite-liked micro/nanomaterials and hybrid micro/nanomaterials.

Molecularly Imprinted Polymer Micro- and Nano-Particles. A review

In recent years, molecularly imprinted polymers (MIPs) have become an excellent solution to the selective and sensitive determination of target molecules in complex matrices where other similar and relative structural compounds could coexist. Although MIPs show the inherent properties of the polymers, including stability, robustness, and easy/cheap synthesis, some of their characteristics can be enhanced, or new functionalities can be obtained when nanoparticles are incorporated in their polymeric structure. The great variety of nanoparticles available significantly increase the possibility of finding the adequate design of nanostructured MIP for each analytical problem. Moreover, different structures (i.e., monolithic solids or MIPs micro/nanoparticles) can be produced depending on the used synthesis approach. This review aims to summarize and describe the most recent and innovative strategies since 2015, based on the combination of MIPs with nanoparticles. The role of the nanoparticles in the polymerization, as well as in the imprinting and adsorption efficiency, is also discussed through the review.

Involvement of Deep Eutectic Solvents in Extraction by Molecularly Imprinted Polymers—A Minireview

Substantial research activity has been focused on new modes of extraction and refining processes during the last decades. In this field, coverage of the recovery of bioactive compounds and the role of green solvents such as deep eutectic solvents (DESs) also gradually increases. A specific field of DESs involvement is represented by molecularly imprinted polymers (MIPs). The current state and prospects of implementing DESs in MIPs chemistry are, based on the accumulated experimental data so far, evaluated and discussed in this minireview.

Solid-Phase Extraction of Catechins from Green Tea with Deep Eutectic Solvent Immobilized Magnetic Molybdenum Disulfide Molecularly Imprinted Polymer

A type of molecular-imprinted polymer with magnetic molybdenum disulfide as a base and deep eutectic solvent as a functional monomer (Fe₃O₄@MoS₂@DES-MIP) was prepared with surface molecular imprinting method. It was applied as the adsorbent for the selective recognition and separation of (+)-catechin, (-)-epicatechin, (-)-epigallocatechin, (-)-epicatechin gallate, and (-)-epigallocatechin gallate in green tea in the process of magnetic solid-phase extraction (MSPE) combined with high-performance liquid chromatography (HPLC). The structure of Fe₃O₄@MoS₂@DES-MIP was characterized by Fourier transform infrared spectroscopy and field emission scanning electron microscopy. The adsorption properties and selective recognition ability on (-)-epigallocatechin gallate and the other four structural analogues were examined and compared. The results show that the polymer has excellent selective recognition ability for (-)-epigallocatechin gallate, and its adsorption capacity was much higher than that of structural analogues. The Fe₃O₄@MoS₂@DES-MIP not only has the special recognition ability to template a molecule, but also can be separated by magnets with high separation efficiency and can be used in MSPE.

Preparation of levofloxacin-imprinted nanoparticles using designed deep eutectic solvents for the selective removal of levofloxacin pollutants from environmental waste water

Designed deep eutectic solvents was applied to preparation of levofloxacin-imprinted nanoparticles as functional monomer. The nanoparticles using for the selective removal of levofloxacin pollutants from a natural environmental system.