The evolution of tooth wear indices

The Prevalence of Tooth Wear and Their Associated Etiologies Among Adult Subjects Visiting Umm Al-Qura University Dental Clinic in Makkah City, Saudi Arabia

In the past two decades, changing trends in socioeconomic status, dietary habits, and individual lifestyles of individuals have led to the emergence of tooth wear as an oral health problem. The present study aimed to investigate the prevalence and the associated etiologies of tooth wear in a convenience sample of adult patients visiting outpatient clinics of the Faculty of Dentistry at Umm Al-Qura University. This cross-sectional study was conducted on adult patients (18-40 years old) visiting outpatient clinics of the Faculty of Dentistry, Umm Al-Qura University. Two trained examiners visually assessed patients' tooth wear using Smith and Knight's Tooth Wear Index (TWI). Following the clinical examination, patients completed a self-administered questionnaire detailing risk factors such as the frequency of intake of acidic food and medicines, general health, chewing habits, dietary factors, and oral health-associated preventive behaviors. The resulting collected data were tabulated and statistically analyzed using Statistical Product and Service Solutions (SPSS, version 21; IBM SPSS Statistics for Windows, Armonk, NY). The total prevalence of tooth wear was 74%, and the recorded mean wear score (TWI) was 0.380 ± 0.386; anterior teeth exhibited greater wear than posterior teeth. Numerous associations were recorded between tooth wear and the tested variables in demographics, habits, diet, and medications, but most of them were not statistically significant. When toothbrushing habits were explored, the only factors to played a significant role in abrading the tooth structure were the type of brush bristles used (P-value = 0.026) and the frequency of brush renewal (P = 0.043). Patients who frequently ate citrus fruits and other acidic foods recorded high wear scores (0.509 ± 0.311 and 0.508 ± 0.402, respectively), although the difference was not statistically significant. When chewing occurred on both sides of the mouth, less tooth wear was recorded than if chewing was on the right or left side only (0.371 ± 0.260, 0.422 ± 0.273, and 0.520 ± 0.419, respectively). The study data support an association between tooth wear and patient occupation, use of hard-bristled and new toothbrushes, eating of citrus and other acidic food, and chewing on one side, as all of these factors increased the risk of tooth wear.

Understanding the Influence of Patient Factors on Accuracy and Decision-Making in a Diagnostic Accuracy Study with Multiple Raters-A Case Study from Dentistry

In diagnostic accuracy studies, the test of interest is typically applied only once in each patient. This paper illustrates some possibilities that arise when diagnoses are carried out by a sufficiently large number of multiple raters. In a dental study, sixty-one examiners were asked to diagnose 49 tooth areas with different grades of tissue loss (minor, moderate, and advanced) to decide whether dentine was exposed (positive status) or not (negative status). The true status was determined by histology (reference). For each tooth, the rate of correct decisions reflecting the difficulty to diagnose this tooth and the positive rate reflecting the perception of the tooth by the raters was computed. Meta-analytical techniques were used to assess the inter-tooth variation and the influence of tooth-specific factors on difficulty or perception, respectively. A huge variation in diagnostic difficulty and perception could be observed. Advanced tissue loss made diagnoses more difficult. The background colour and tissue loss were associated with perception and may hint to cues used by the raters. The use of multiple raters in a diagnostic accuracy study allows detailed investigations which make it possible to obtain further insights into the decision-making process of the raters.

Sex-specific reference values for the crown heights of permanent anterior teeth and canines for assessing tooth wear

OBJECTIVE

We propose sex-specific reference values for the clinical crown height of anterior teeth and canines.

MATERIAL AND METHODS

In this cross-sectional study, 1426 teeth were analysed from 169 undergraduate and postgraduate dental students (83 women and 86 men, median age 22 years). Teeth with worn or totally restored incisal edges, or gingival inflammation were excluded. Age, gender and body height were recorded and the degree of tooth wear was scored according to the quantification module of the Tooth Wear Evaluation System. The clinical crown heights of all anterior teeth and canines were measured from the gingival margin to the incisal edge with a digital calliper. Reference values for tooth groups were obtained at the percentiles 10, and expressed by sex if there was a significant difference between men and women.

RESULTS

Mean crown heights were bigger in men than in women for each tooth group (p = .028). Clinical crown heights showed sexual dimorphism at the 10^th percentiles for all tooth groups except for mandibular anterior teeth.

CONCLUSIONS

For assessing tooth wear, the sex-specific reference values for the clinical crown height of young adults Caucasoids range from 7.5 mm to 9.0 mm in women and from 7.5 mm to 9.5 in men.

Prevalence and risk factors of erosive tooth wear among young adults in the Singapore military

OBJECTIVES

Erosive tooth wear (ETW) is defined as the irreversible chemo-mechanical loss of dental hard tissues without plaque or bacteria and has been a growing phenomenon in the general population worldwide. The aim of this study was to determine the prevalence of ETW and the associated risk factors among young military personnel in Singapore.

MATERIALS AND METHODS

This cross-sectional study consisted of a questionnaire and clinical examination of military personnel between 18 and 25 years. The questionnaire collected information on demographics, medical and dental history, lifestyle and dietary habits. Tooth wear was clinically evaluated using the Basic Erosive Wear Examination (BEWE) index. The participants were profiled into four risk categories (none, low, moderate, severe) based on the sum score. Multivariable logistic regression analysis was performed to determine the risk factors associated with the presence of ETW.

RESULTS

Out of 1296 participants evaluated, 21.8% of them had ETW. The anterior sextants were more affected by erosion than posterior sextants for both arches. The risk factors significantly associated with ETW were GERD (OR = 2.83, p = 0.041), presence of self-reported TMD symptoms (OR = 2.51, p < 0.001), acidic food (OR = 2.03, p < 0.001) and drinks (OR = 3.07, p < 0.001), high caries risk (OR = 4.59, p < 0.001) and toothbrush stiffness (OR = 4.67, p < 0.001).

CONCLUSION

ETW is prevalent among the young military population, with over half of the population at a risk of ETW. Gastric reflux disease, TMD, acidic diet, dental caries susceptibility and the use of stiff toothbrushes were identified as significant risk factors.

CLINICAL RELEVANCE

A large proportion of young military personnel exhibited mild to moderate risk of ETW. Dental professionals can identify risk-susceptible individuals at a young age and educated them with preventive measures and dietary interventions to prevent the progression of the condition.

Development of a Clinically Relevant Index for Tooth Wear Treatment Needs

Background: This study aimed to develop a tooth wear classification system that combined the extent, severity, and aesthetic impact of tooth wear and correlated them with the most appropriate clinical management strategy. Methods: Three hundred photographs were used to develop a classification tool that contained four levels of severity and aesthetic impact (0, 1, 2, and 3) in three age groups of patients. Ten examiners assessed and classified the cases using validated forms. Additionally, they selected the recommended treatment modality for each level. The analysis was conducted using a coefficient correlation test. Results: The coefficient correlation for the severity was 0.81, 0.82 in the upper anterior and posterior segments, and 0.85 and 0.77 for the lower anterior and posterior segments, respectively. The aesthetic impact correlation coefficient was 0.84. Examiners had agreed that minor cases required monitoring or simple restorative interventions. The moderate-level cases had variety in the recommended management options depending on the aim of treatment. The severe level cases often required rehabilitation at an increased occlusal vertical dimension. Conclusion: Within the limitations of this preliminary study, a good agreement between the examiners was found using the provided tools. More strict criteria in the classification part of the tool can further improve the examiners’ agreement.

Application of the Intraoral Scanner in the Diagnosis of Dental Wear: An In Vivo Study of Tooth Wear Analysis

In recent years, there has been an increase in the incidence of dental wear; thus, an early diagnosis is important. Conventional methods of diagnosis are based primarily on the visual abilities of the dentist, and therefore the use of new technologies for the detection of dental wear may be very useful. The aim of the study was to analyze the sensitivity and specificity of the intraoral scanner for measuring dental wear, as well as to evaluate patients' satisfaction with the use of the scanner. The study was conducted with 46 volunteers who underwent three intraoral analyses: a first baseline scanning, a second scanning after 6 months and a final scanning after one year performed by four operators divided into two groups. One of the operators performed the visual analysis of dental wear, and the other performed the analysis using the intraoral scanner 3M™ True Definition intraoral scanner (ESPE, Seefeld, Germany). The data obtained from the intraoral scanner showed levels of specificity and sensitivity that enable the intraoral scanner to be used as a diagnostic tool in the assessment of tooth wear. The participants also showed a high degree of satisfaction with the scanner as a communication tool.

Dental health status of community-dwelling adults aged 50 years and over in Ireland. A cross-sectional analysis of the Wave 3 TILDA cohort

Background: Little is known about the current oral health status of adults in Ireland. The aim of this study was to assess the dental health of community-dwelling adults aged 50 years and over in Ireland and to compare the current status to previous national surveys.  Methods: The Irish Longitudinal Study on Ageing (TILDA) Wave 3 assessed the dental health of a subset of participants. Respondents attending for health assessments were offered a dental examination. The World Health Organization examination criteria were used. Results: Of the 3111 people who were offered the dental assessment, 2525 were examined. Adults below 50 years of age and respondents whose dental health data were unavailable at the time of analysis were omitted, giving a final sample of 2504.  Among the dental assessment sample, 9.9% (249) were edentate. Of those aged 65 years and older, 15.6% were edentate while for the same age group 40.9% were edentate in the 2000-02 national survey. The mean number of teeth present in those aged 65 years or older was 14.9 for males and 14.2 for females, whereas in 2000-02 it was 9.9 and 7.4, respectively.  56.8% of the dentate sample had 10 or more tooth contacts. The mean DMFT of those aged 50 years or more was 18.5 and the Root Caries Index was 6.3. Between 2000-02 and 2014-5 (this study) in adults aged 65 years and over, the mean DMFT decreased from 25.9 to 20.1 and the Root Caries Index decreased from 11.6 to 9.1. Conclusion: The results indicate the dental health of community-dwelling adults aged 50 years and over in Ireland improved since the previous survey of 2000-02. These improvements mean a change in the treatment needs of this age group and will require policy and service adjustments to meet these needs

The design, development, and calibration of cervical abrasion index of treatment needs probe for measurement of cervical abrasion

Context:

Although a common dental problem, there are no simple instruments or reliable methods to measure cervical abrasion.

Aim:

To study the design, development, calibration, efficacy, and compliance of usage of a novel Cervical Abrasion Index of Treatment Need (CAITN) probe to measure cervical abrasion.

Settings and Design:

The ex-vivo study was conducted as a part of comprehensive study for the development of standardized CAITN probe and index with a standard methodology for recording the abrasion.

Materials and Methods:

The compliance and usage of the probe were assessed by a standardized set of questionnaires to the interns followed by an ex-vivo study in 100 subjects. Gold standard comparisons with Vernier caliper, inter-examiner, and intra-examiner reliability were analyzed using SPSS.

Results:

Data from the questionnaire indicate that 100% of examiners had no difficulty in handling the instrument or measuring and reading the values. Comparison between the CAITN probe and the gold standard was statistically significant indicating a correlation for cervical abrasion measurement between the two methods (p < 0.001). The mean difference between the two measurements using the CAITN probe and gold standard method was calculated with paired t-test and was insignificant (p > 0.05). High statistical significant correlation was also found for intra-examiner and inter-examiner reliability measurement of CAITN probe (p < 0.001).

Conclusion:

The design and structure of the CAITN probe are standardized with a fair gold standard comparison and that the novel probe can be used as an effective tool to measure the depth of cervical abrasion and its treatment needs.

Cervical abrasion, sexual dimorphism, and anthropometric tooth dimension

Introduction:

The aim of this study was to analyze the anatomic crowns of the maxillary and mandibular dentition concerning the mesiodistal, buccolingual measurements which will be used to establish normative data as a part of comprehensive study being carried out to determine the depth of the cervical abrasion (CA) of the individuals by predicting the CA Index of Treatment Needs (CAITN) score.

Materials and Methods:

A newly developed instrument termed as CAITN probe was used to measure CA of the tooth more quantitatively. The mesiodistal and buccolingual width of all the 14 maxillary and mandibular teeth from the right second permanent molar to the left second permanent molar of the study sample was measured. The ratio between buccolingual and mesiodistal measurements of each tooth of the maxillary and mandibular arch of the study sample (n=100) was also determined. Statistical analysis was performed using the SPSS 26.0 software.

Results:

Descriptive statistics were calculated for each group independently. The statistical significance of the difference in mean in mesiodistal and buccolingual diameters between males and females was calculated using the t-test for independent samples with p < 0.05. The ratio was highest in the left second premolar (1.752) and least in the right central incisor (0.980) of the maxillary arch. Similarly, the ratio was highest in the left central incisor (1.723) and least in the left second molar (0.910) of the mandibular arch.

Conclusion:

The present study was conducted as an initial step in the process of development of the novel tool or index enabling the dentists to organize the health-care needs of their patients by facilitating standardized identification of CA with objective measurements used for epidemiological or community purpose.

Wear behavior of a microhybrid composite vs. a nanocomposite in the treatment of severe tooth wear patients: A 5-year clinical study

OBJECTIVE

This study aimed to compare the wear behavior of a microhybrid composite vs. a nanocomposite in patients suffering from severe tooth wear.

METHODS

A convenience sample of 16 severe tooth wear patients from the Radboud Tooth Wear Project was included. Eight of them were treated with a microhybrid composite (Clearfil APX, Kuraray) and the other eight with a nanocomposite (Filtek Supreme XTE, 3M). The Direct Shaping by Occlusion (DSO) technique was used for all patients. Clinical records were collected after 1 month (baseline) as well as 1, 3 and 5 years post-treatment. The maximum height loss at specific areas per tooth was measured with Geomagic Qualify software. Intra-observer reliability was tested with paired t-tests, while multilevel logistic regression analyses were used to compare odds ratios (OR) of "large amount of wear".

RESULTS

Intra-observer reliability tests confirmed that two repeated measurements agreed well (p > 0.136). For anterior mandibular teeth, Filtek Supreme showed significantly less wear than Clearfil APX; in maxillary anterior teeth, Clearfil APX showed significantly less wear (OR _material = 0.28, OR _{jaw position} = 0.079, p < 0.001). For premolar and molar teeth, Filtek Supreme showed less wear in bearing cusps, whereas Clearfil APX showed less wear in non-bearing cusps (premolar: OR _material = 0.42, OR _{bearing condition} = 0.18, p = 0.001; molar: OR _material = 0.50, OR _{bearing condition} = 0.14, p < 0.001).

SIGNIFICANCE

Nanocomposite restorations showed significantly less wear at bearing cusps, whereas microhybrid composite restorations showed less wear at non-bearing cusps and anterior maxillary teeth.

Dental health status of community-dwelling adults aged 50 years and over in Ireland. A cross-sectional analysis of the Wave 3 TILDA cohort

Background: Little is known about the current oral health status of adults in Ireland. The aim of this study was to assess the dental health of community-dwelling adults aged 50 years and over in Ireland and to compare the current status to previous national surveys.  Methods: The Irish Longitudinal Study on Ageing (TILDA) Wave 3 assessed the dental health of a subset of participants. Respondents attending for health assessments were offered a dental examination. The World Health Organization examination criteria were used. Results: Of the 3111 people who were offered the dental assessment, 2525 were examined. Adults below 50 years of age and respondents whose dental health data were unavailable at the time of analysis were omitted, giving a final sample of 2504.  Among the dental assessment sample, 9.9% (249) were edentate. Of those aged 65 years and older, 15.6% were edentate while for the same age group 40.9% were edentate in the 2000-02 national survey. The mean number of teeth present in those aged 65 years or older was 14.9 for males and 14.2 for females, whereas in 2000-02 it was 9.9 and 7.4, respectively.  56.8% of the dentate sample had 10 or more tooth contacts. The mean DMFT of those aged 50 years or more was 18.5 and the Root Caries Index was 6.3. Between 2000-02 and 2014-5 (this study) in adults aged 65 years and over, the mean DMFT decreased from 25.9 to 20.1 and the Root Caries Index decreased from 11.6 to 9.1. Conclusion: The results indicate improvements in the dental health of community-dwelling adults aged 50 years and over in Ireland as compared to the previous survey of 2000-02. These improvements mean a change in the treatment needs of this age group and will require policy and service adjustments to meet these needs

Intraoral scanner-based monitoring of tooth wear in young adults: 12-month results

OBJECTIVES

To investigate tooth wear in young adults, intraoral scanning was used for digital monitoring of the mandibular first molar over 12 months. A possible influence of aetiological factors obtained by a questionnaire on tooth wear was investigated.

MATERIALS AND METHODS

A total of 109 participants (mean age at the start of the study: 21.0 ± 2.2 years) were included in this clinical study. At baseline (T0), an intraoral scan (Trios 3, 3Shape) of the study tooth (FDI # 36 or #46) was conducted. After a mean observation period of 373 ± 19 days, a second intraoral scan (T1, n = 94) of the same tooth as at T0 was performed and standard tessellation language datasets were superimposed with 3D analysis software (GOM Inspect). The occlusal surface of the study tooth was divided into 7 areas (5 cusps, 2 ridges) and maximum vertical substance loss was measured between T0 and T1 (n = 91). Three types of tooth wear were defined: cupping (C), facet (F) and combined cupping-facet (CF). Furthermore, a questionnaire on aetiological factors, such as dietary behaviour, was filled out at T0. Data were analysed with non-parametric tests (p < 0.05).

RESULTS

Only one study tooth exhibited no tooth wear at T0, whereas 3 teeth showed C, 47 teeth F and 40 teeth CF. A progression of vertical substance loss for all three types was shown. Most affected were the mesiobuccal cusps (43, 38/47 µm; median, 95%CI) followed by distobuccal (36, 33/39 µm), mesiolingual (35, 26/40 µm), distolingual (34, 27/36 µm) and distal (31, 25/34 µm). On mesial and distal ridges, only F was detected with the lowest vertical substance loss of all areas (mesial ridge: 0, 0/0 µm; distal ridge: 0, 0/0 µm). An association between aetiological factors and loss values could not be shown.

CONCLUSIONS

All study teeth showed clear signs of wear, and after only 1 year, further substance loss was detectable. This result is of significance for young adults.

CLINICAL RELEVANCE

Since data of young adults regarding tooth wear are scarce, the results give a first idea of the amount of vertical loss per year and its relation to aetiological factors such as dietary behaviour. Therefore, further studies over a longer observation period are highly recommended.

McNamara's Fallacies in Dentistry. 2: Tooth Surface Loss Fallacies

Given the number of perceived myths and fallacies in relation to tooth substance loss, this article seeks to address these using a wide variety of clinical cases as examples and by way of scientific references.

CPD/Clinical Relevance: The incidence of tooth wear is increasing, so an understanding of the myths and truths surrounding its treatment is valuable.

Reliability of qualitative occlusal tooth wear evaluation using an intraoral scanner: A pilot study

Dental wear analysis through the use of an intraoral scanner is a reality of modern dentistry. This study aimed to investigate the reliability of qualitative tooth wear evaluation through three-dimensional images captured with an intraoral scanner and compared to clinical and photographic examinations. Eighteen adult volunteers of both genders (18 to 55 years old) were submitted to clinical exams, intraoral photographs and intraoral scanning protocol using an optical scanner (TRIOS® Pod, 3Shape, Copenhagen, Denmark). Occlusal tooth wear, from second to second premolars, was measured by two evaluators and reevaluated after 30 days, according to a slight modification of the method described by Mockers et al. Weighted Kappa was used to measure intra and inter-examiner agreement. The Friedman test was used to verify the differences among methods. Random and systematic errors were assessed using Bland-Altman plots. All statistical analysis was performed with p<0.05. There was a substantive agreement for clinical (K = 0.75) and photographic exams (K = 0.79) and a moderate agreement for intraoral scanner analysis (K = 0.60) for inter-examiner evaluation. A substantial intra-examiner agreement was obtained for both evaluators. No significant difference between the methods was observed (p = 0.7343 for examiner 1 and 0.8007 for examiner 2). The Bland-Altman plot confirmed no systematic errors between the methods and a random error of 0.25 with the scanner method when compared to clinical assessment. All three methods showed reliability in qualitative occlusal tooth wear evaluation. Intraoral scanning seems to be a sound and reliable tool to evaluate tooth wear when compared to traditional methods, considering the lower inter-examiner agreement and the inherent limitations of this pilot study. Further research will be necessary in order to achieve more robust evidence.

Monitoring of Erosive Tooth Wear with Intraoral Scanners In vitro

Intraoral scanners (IOS) have been used to quantify tooth wear, but so far they have not been systematically validated for monitoring of tissue loss. The aim of this in vitro study was to investigate whether progression of tissue loss can be detected with an IOS and whether IOS values agree with those obtained with noncontacting profilometry (PRO) serving as a standard method. Model jaws were mounted in a phantom head positioned in a dental chair. Flattened areas were prepared on the non-load-bearing cusps of the first molars (model teeth; n = 16) in order to fix flat enamel samples with an experimental area and a reference area. After baseline PRO and IOS, the experimental enamel area was stepwise etched with 35% H3PO4 gel (4 × 30 s and 4 × 15 s). After each etching, PRO and IOS was performed and the vertical tissue loss between the reference and experimental areas was measured, each at the same 3 measurement points. Furthermore, cupped cusps were simulated by stepwise preparation of the load-bearing cusps of the model teeth with a spherical diamond bur, and the maximum vertical depth after each preparation step was measured only by IOS. Trios3 (3Shape, Denmark), Carestream CS3600 (Carestream, USA) and an optical profilometer (MicroProf, Fries, Germany) were used to measure the flat areas of the enamel samples, whereas only IOS were used to measure curved surfaces on the load-bearing cupped cusps of the model teeth. The IOS data were analyzed with an external software (GOM Inspect, Germany) and with the respective internal IOS software. PRO revealed a mean (±SD) tissue loss of 17.1 ± 4.7 µm after 30-s etching steps and 10.1 ± 5.1 µm after the 15-s etching steps. IOS and software types were able to detect the progression of tissue loss after each etching step (p ≤ 0.001 each); Bland-Altmann plots revealed good agreement with PRO regardless of the order of tissue loss, and no systematic difference was found. Increasing cupped lesion depths were detected by all IOS, with no significant differences between IOS and analysis methods. IOS were able to detect small amounts of tissue loss under simulated clinical conditions and seem to be a promising tool for monitoring even initial erosive tooth wear.

A comparative evaluation between the reliability of gypsum casts and digital greyscale intra-oral scans for the scoring of tooth wear using the Tooth Wear Evaluation System (TWES)

Background

The Tooth Wear Evaluation System (TWES) is a type of tooth wear index. To date, there is the lack of data comparing the reliability of the application of this index on gypsum cast records and digital greyscale intra‐oral scan records.

Objectives

A comparative evaluation between the use of gypsum cast records and digital greyscale intra‐oral scan records with the reliability of tooth wear scoring using the TWES amongst a group of patients with tooth wear.

Methods

Records for 10 patients with moderate to severe tooth wear (TWES ≥ 2) were randomly selected from a larger clinical trial. TWES grading of the occlusal/incisal, buccal and palatal/lingual surfaces was performed to determine the levels of intra‐ and interobserver agreement. Intra‐observer reproducibility was based on the findings of one examiner only. For the interobserver reproducibility, the findings of two examiners were considered. One set of models/ records were used per patient. Cohen's weighted kappa (κ_W) was used to ascertain agreement between and within the observers. Comparison of agreement was performed using t tests (P < .05).

Results

For the scoring of the of the total occlusal/incisal surfaces, the overall levels of intra‐ and interobserver agreement were significantly higher using the gypsum cast records than with the digital greyscale intra‐oral scan records, (P < .001) and (P < .001), respectively. For the overall buccal surfaces, only a significant difference was found in the intra‐observer agreement using gypsum casts, (P = .013). For the palatal/lingual surfaces, a significant difference was only reported in the interobserver agreement using gypsum casts, (P = .043). At the occlusal/incisal surfaces, grading performed using gypsum casts, culminated in significantly higher TWES scores than with the use of the digital greyscale intra‐oral scans (P < .001). At the buccal and palatal/lingual surfaces, significantly higher wear scores were obtained using digital greyscale intra‐oral scan records (P < .009).

Conclusions

The TWES can offer a reliable means for the scoring of wearing occlusal/incisal surfaces using gypsum casts. The reliability offered by digital greyscale intra‐oral scans for consecutive scoring was in general, inferior.

Dimorphism in dental tissues: Sex differences in archaeological individuals for multiple tooth types

OBJECTIVES

Dimorphism in the dentition has been observed in human populations worldwide. However, research has largely focused on traditional linear crown measurements. As imaging systems, such as micro-computed tomography (micro-CT), become increasingly more accessible, new dental measurements such as dental tissue size and proportions can be obtained. This research investigates the variation of dental tissues and proportions by sex in archaeological samples.

MATERIALS AND METHODS

Upper and lower first incisor to second premolar tooth rows were obtained from 30 individuals (n = 300), from 3 archaeological samples. The teeth were micro-CT scanned and surface area and volumetric measurements were obtained from the surface meshes extracted. Dental wear was also recorded and differences between sexes determined.

RESULTS

Enamel and crown measurements were found to be larger in females. Conversely, dentine and root measurements were larger in males.

DISCUSSION

The findings support the potential use of dental tissues to estimate sex of individuals from archaeological samples, while also indicating that individuals aged using current dental aging methods may be underaged or overaged due to sex differences in enamel thickness.

Comparing zirconia to anterior strip crowns in primary anterior teeth in children: a randomized clinical trial

BACKGROUND

Providing restorations to anterior teeth in children is a challenging task due to the need for high esthetics, strength, and durability. This study was done to compare prefabricated primary zirconia with resin composite strip crowns on primary maxillary central and lateral incisors with regards to gingival health, plaque accumulation, recurrent caries, restoration failure, and opposing teeth wear over a period of 3, 6 and 12 months.

METHODS

Children attending the King Abdulaziz University, Faculty of Dentistry (KAUFD) clinics who needed restorations were screened for inclusion criteria. A total of 120 teeth were treated; 60 with zirconia and 60 with strip crowns. Randomization was done by simple random allocation using SPSS software version 20.0 (Armonk, NY; IBM Corp.). A simple descriptive statistic was used for analysis by Wilcoxon Signed-Rank test and Chi-square test. Level of significance was set at (α = 0.05) and level of confidence at (95%). The presented research was registered retrospectively at ClinicalTrials.gov in 6th of August 2017, under registration number NCT03184012.

RESULTS

Zirconia crowns showed significantly less gingival bleeding at the 3- and 6-months follow up periods (p < 0.006, p < 0.001; respectively), less plaque accumulation at all follow up visits (p < 0.001), no restoration failure (p < 0.001), but more wear to opposing teeth (p < 0.02). No significant difference was found between the two crowns with regards to recurrent caries (p < 0.135).

CONCLUSION

Based on our data we conclude that overtime teeth covered with zirconia crowns show better gingival health and less bleeding, plaque accumulation as well as less loss of material. On the other hand, zirconia can cause more loss of opposing tooth structure.

A systematic review of dietary acids and habits on dental erosion in adolescents

BACKGROUND

Dental erosion is the dissolution of dental hard tissues caused by acids of a non-bacterial origin. Dietary acids are considered the predominant and most controllable factor.

AIM

To synthesise the literature on the effects of dietary acids and habits on dental erosion in the permanent dentition of 10- to 19-year-old adolescents.

MATERIALS AND METHODS

An electronic literature search was undertaken in Cochrane, MEDLINE, CINAHL, Dentistry & Oral Sciences Source via EBSCOhost, and Embase with no restriction on the date of publication.

RESULTS

The initial search identified 449 articles, and 338 remained after removal of duplicates. Seventy-seven articles remained after screening of titles and abstracts, and 52 were eligible for the full-text review. A considerable variety of beverages, food, and dietary habits were reported as risk factors for dental erosion. The most consistent findings implicated the erosive potential of carbonated beverages and the consumption of acidic drinks at bedtime.

CONCLUSIONS

Although results were not consistent between cohort and cross-sectional studies, this review suggests certain dietary risk factors may contribute to dental erosion in adolescents. There is a need for more high-quality cohort studies to establish more conclusive evidence on the role of dietary acids and habits on dental erosion.

Consumption of acidic drinks, knowledge and concern about dental erosive wear in Norwegian high school students

OBJECTIVES

The objectives of the present study were to assess the consumption of acidic beverages, knowledge and concern about preventing dental erosive wear, and to examine potential associations between these variables, in a sample of high school students.

MATERIALS AND METHODS

A survey measuring acidic beverage consumption, knowledge and concern about erosive tooth wear was conducted at 13 high schools in Rogaland county, Norway.

RESULTS

Of the 850 students who completed the questionnaire, 26% reported that they drink acidic beverages every day. There were significant gender differences for the consumption of acidic drinks. The survey also demonstrated that a high proportion of students lacks basic knowledge of what erosive tooth wear is, and that this lack of knowledge is associated with a more frequent intake of acidic beverages. However, students who responded that they are concerned about preventing dental erosive wear reported that they drink soft drinks and energy drinks less frequently than students who are not concerned about this.

CONCLUSIONS

Results from this study support assumptions about a lack of knowledge about dental erosive wear in youth, and that this lack of knowledge is associated with a more frequent intake of acidic drinks.

A study to investigate habits with tooth wear assessments among UK and non-UK dental practitioners

Aim To assess the habits of tooth wear risk assessment and charting using a tooth wear index, by UK and non-UK dental practitioners.Design A questionnaire-based evaluation.Methods Three hundred and two completed questionnaires were returned and the outcomes analysed using descriptives, Chi-squared test and Fisher's exact test in SPSS. Significance was inferred at p <0.05.Results Based on a sample of 297 responses, 81% agreed to the need to undertake risk assessment for all dental patients attending for a first-time consultation. Fifty-nine percent undertook risk assessments for 'new patients' previously identified with signs of severe tooth wear. The routine use of a clinical index to perform tooth wear charting was described by 13.5%, with 5% documenting the frequent use of the BEWE tool. While specialist dental practitioners or those with further post-graduate training were more likely to use a tooth wear index (p <0.05), there were no other significant relationships between any of the variables in the sample and the practising habits assessed.Conclusion This investigation alludes to good levels of professional awareness of tooth wear. However, the need for improvement with the actual undertaking of risk assessments for tooth wear and consistency with tooth wear assessment and charting was determined. The need for appropriate professional guidance for the undertaking of tooth wear assessments is supported by the outcomes of this investigation.

Evaluation of the assessment of tooth wear by general dental practitioners

Aim To evaluate currently available methods for assessing and monitoring tooth wear in a general dental practice environment.Method A questionnaire was developed and used to obtain data. Models were used to test the dentists' assessment of tooth wear. Ethical permission was obtained.Results Twenty general dental practitioners were interviewed and 100% were aware of the use of study models, 50% about the use of photographs and 45% of the BEWE. Methods used to assess and monitor tooth wear were study models (75%), photographs (65%), BEWE (10%), Smith & Knight index (0%) and no method (15%). Sixty-five percent of dentists were unaware of any guidelines on monitoring tooth wear. In comparing serial photographs, no participant correctly identified all the wear changes and 25% thought a change had occurred when one hadn't. Statistical analysis showed a sensitivity of only 73% with a specificity of 75%. In comparing serial study models (same cases as used in the photographs), 55% of participants identified a change when no change occurred and 50-60% of participants were able to correctly identify if wear had or had not occurred. Participants graded the models according to BEWE. Statistical analysis of these results shows a sensitivity of just 69% with a specificity of only 55%. The inter-operator agreement (Fliess' Kappa) showed an even lower degree of agreement was found with only 0.12, which suggests only a slight level of agreement, less than that with photographs.Conclusion Dentists do not seem to be aware of the current guidelines but do make reasonable attempts to monitor tooth wear. None of the currently available methods are ideal and even the use of serial study models is open to much inter-operator variability.

[Dental erosion in a sample of Valencian children. Prevalence and evaluation of eating habits]

Introduction

Introduction: dental erosion is the pathological, chronic, localized and painless loss of dental tissues, produced by the chemical action of acids, where the action of microorganisms is not involved. In recent years, a significant increase in the prevalence of this pathology has been observed, especially in children and adolescents. Objectives: to determine the prevalence of dental erosion in temporary dentition using the Basic Erosive Wear Examination Index (BEWE) in children between 5 and 12 years of age, and to determine the eating habits that may favor the development of these lesions. Methods: a cross-sectional study was carried out on a sample of 391 children. A survey was conducted where eating habits were analyzed and a clinical examination of the temporary teeth was performed using the BEWE index. Results: the prevalence of dental erosion in the studied sample was 19.7 %, with mild lesions being most common. Conclusions: in all, 30.62 % of the studied population had a low risk of dental erosion, and risk was seen to increase with consumption of acidic beverages (soft drinks, isotonic drinks and fruit juices) and acidic fruits such as oranges, grapes and apples.

Prevalence of erosive tooth wear in Chilean adults, 2016: A cross-sectional study

OBJECTIVES

To determine the prevalence, severity and distribution of erosive tooth wear lesions in adult patients at the Universidad de los Andes Health Center in the San Bernardo Metropolitan Region, Chile, during a period of 4 months in 2016.

METHODS

A cross-sectional study was conducted. A consecutive sample of patients from 18 to 46 years old who were receiving care at the Universidad de los Andes Health Center during a period from September 2016 to January 2017 was analysed. Basic erosive wear examinations (BEWEs) were performed by two calibrated examiners.

RESULTS

A total of 535 adults were included in this study. An erosive tooth wear prevalence of 97.9% was found in which at least one surface had a BEWE score of 2 or 3 as the highest score (98.56% for females and 95.8% for males). In the sample, 75.70% and 74.77% of individuals had at least one surface with a BEWE score of 3 at the second and fifth sextant, respectively. The median of cumulative BEWE scores was 12. The median by individual of the affected percentage of tooth surfaces with BEWE scores 2 or 3 was 19.70%.

CONCLUSIONS

We found a high prevalence of erosive tooth wear, mainly in the anterior group of teeth. No differences were found between the sexes, but a positive correlation with age was found. The percentage of surfaces affected was low or moderate.

Level of work stress and factors associated with bruxism in the military crew of the Peruvian Air Force

BACKGROUND

Military life leads to a great personal sacrifice and labor in the aircrew because they are constantly subjected to innumerable activities which have a great work pressure; therefore, the aim of this study was to determine the level of work stress associated with bruxism in the aircrew of the Peruvian Air Force.

METHODS

This was a cross-sectional study. A total of 204 crew members of the Peruvian Air Force from the Air Group were surveyed, and the stomatological clinical inspection was carried out. Each crew member was evaluated using the validated International Labor Organization-World Health Organization (ILO-WHO) Work Stress Scale, and clinical records were used to diagnose bruxism using the Smith and Knight wear index.

RESULTS

It was found that 93.7% (n = 191) of the crew members were men and 6.3% (n = 13) were women; and the percentage of intermediate-level stress was found to be high in the grade of non-commissioned officers, whereas in the officer grade, the level of stress was low. There was also a statistically significant association between the variables military grade, sex, and age group. The sub-officers presented a higher percentage in the category "with bruxism", while in the rank of officers the category of "non-bruxism" was the most prevalent.

CONCLUSIONS

This study showed a statistically significant association between the variable bruxism and the level of work stress between the military aviators of the Peruvian Air Force (p<0.001).

The Bruxoff Device as a Screening Method for Sleep Bruxism in Dental Practice

Sleep bruxism (SB) is a masticatory muscle activity during sleep and a common phenomenon. Severe SB can have a serious impact on the success of dental treatment. Reliable methods of screening and diagnosing patients with SB are crucial. Therefore, in this study, a Bruxoff device as a potential screening and diagnostic method for sleep bruxism was evaluated. A total of 60 adults participated in this study: 35 patients with symptoms of bruxism (study group) and 25 asymptomatic patients (control group). Data were recorded using Bruxoff. All symptomatic patients participating in the study turned out to be bruxers, while not all asymptomatic patients turned out to be non-bruxers according to the Bruxoff device. Bruxoff is a simple screening device that can be safely used to evaluate masseter muscle activity during sleep. Since the device does not have a built-in microphone and/or video camera and, therefore, cannot record grinding sounds, the objective capabilities of Bruxoff as a single diagnostic device for sleep bruxism are limited.

Clinical presentation of two phenotypes of tooth wear patients

OBJECTIVE

To assess the clinical presentation of wear lesions in two phenotypes of tooth wear (TW) patients based on distribution and morphological features of wear.

MATERIALS AND METHODS

103 patients (mean age = 43.1 years) were divided into two groups based on cluster analysis; cluster A (61 patients) and cluster B (42 patients). The distribution of wear lesions, scores of presence or absence of 10 defined morphological TW criteria and number of teeth fulfilling each criteria were compared between groups. Intra- and inter-examiner reliability of the 10 TW criteria was determined by Cohen's kappa and intraclass correlation coefficient.

RESULTS

While cluster A had more wear in maxillary anterior teeth and mandibular molars compared with the same opposing tooth groups (p < 0.001, p < 0.007 respectively), there were no differences for cluster B. Cluster A was characterized by higher prevalence of 4 chemical morphological criteria and the highest number of teeth affected by one chemical criteria, whereas cluster B had a higher prevalence of one mechanical criteria and higher number of teeth affected by an additional mechanical criteria. Both intra- and inter-examiner values for the defined TW criteria were fair to excellent.

CONCLUSION

The results may indicate a more chemical background for TW in cluster A and mechanical background in cluster B. Furthermore, clinicians may use certain clinical features of TW to distinguish between individuals who belong to a specific TW cluster with a presumed chemical or mechanical etiology. These preliminary findings need to be confirmed in future studies.

Wear of dental materials: Clinical significance and laboratory wear simulation methods -A review

This review focusses on tribological aspects of teeth during function, the clinical significance of wear, wear of natural teeth and restorative materials and laboratory methods to simulate wear of restorative materials. Ceramic, metal alloy and amalgam show low material wear, whereas resin-based materials demonstrate substantial wear in the long term. The clinical wear shows a high variability with the patient factor accounts for about 50% of the variability. Wear as such seldomly compromises the function of the stomatognath system or individual teeth and is in most cases an esthetic problem. Particles that are ingested due to attrition and abrasion wear may pose a health risk to the patient, especially those from composite resin materials. However, systematic clinical studies on that issue are not available. For laboratory research many wear simulation devices and methods have been developed but only few are validated and have a moderate correlation with clinical wear.

The sensitivity of digital intraoral scanners at measuring early erosive wear

OBJECTIVES

To investigate the sensitivity of intraoral scanners to quantitatively detect early erosive tooth wear.

METHODS

Natural buccal enamel samples were mounted in acrylic and scanned at baseline with an intraoral scanner (3 M True Definition Scanner, 3 M, USA). Samples were then exposed to 0.3% citric acid pH 3.2 at intervals of 10 min up to a total of 120 min and scanned after each exposure resulting in analysis of 13 datapoints per sample. Each scan was aligned with the baseline and data points super-imposed using an iterative closest point (ICP) algorithm on the acrylic surfaces (Geomagic Control Software, 3Dsystems, Darmstadt, Germany). Wear was measured using maximum profile loss, average profile loss and volume change. Data were normally distributed and Pearson correlations between erosion time and wear measurements assessed.

RESULTS

After each 10-minute exposure until 120 min, maximum profile loss (μm) increased from 33.4 to 72.8 μm, average profile loss from 9.1 to 18.6 μm. Wear correlated with increasing acid exposure for both maximum profile loss wear (r = 0.877 p < 0.001) and average profile loss (r = 0.663 p = 0.019) respectively. Volume measurements were inconsistent at this level of wear.

CONCLUSIONS

Using scan data obtained from the intra oral scanners (IOS), increasing step height changes were observed with increasing exposures to acid. This study indicates there is potential of scans taken with an IOS to be used to detect early erosive tooth wear. However, precision was low suggesting limitations for minimal changes.

CLINICAL SIGNIFICANCE

Although sub-visual wear was detected by intra-oral scanners on natural enamel surfaces, the accuracy was not sufficient to reliably diagnose that wear had occurred and interpretation of measurements should be done with caution. However, these results may be promising for detecting wear at more advanced stages.

Conservative Management of Dental Erosion in Adolescents with Medical Conditions

The prevalence of dental erosion among children and adolescents is trending higher in recent decades and is becoming a major concern. Dental erosion can be caused by either extrinsic or intrinsic acids or both. One of the established aetiological factors for dental erosion by intrinsic acid is the gastrooesophageal reflux disease. The degree of dental erosions may be influenced by any medical conditions that cause a reduction in salivary flow such as the salivary gland excision, autoimmune disease, radiation to the head and neck regions, and medications. If left untreated, the dental erosion can cause dentine hypersensitivity, loss of occlusal vertical height, and aesthetic problems. For effective management of dental erosion, the aetiology of each case must be determined, and its detection at an early stage is of prime importance. This case report illustrates the conservative management of dental erosion in two adolescent patients presented with their medical conditions and behaviour issues. The aim of the treatments was to preserve the vitality of the affected teeth. The treatments were successfully completed using a conservative approach, with the patients' medical conditions taken into consideration.

Oral health status of community dwelling adults aged 50 years and over in Ireland. A cross-sectional analysis of the Wave 3 TILDA cohort

Background: Little is known about the current oral health status of adults in Ireland. The aim of this study was to measure the oral health status of community dwelling adults aged 50 years and over in Ireland, and to compare the current status to previous surveys of oral health in adults.  Methods: The Irish Longitudinal Study on Ageing (TILDA) Wave 3 provided an opportunity to assess the oral health of a subset of TILDA participants. Respondents attending for health assessments at the TILDA centre were offered an oral health examination. The World Health Organization examination criteria were used. Results: Out of the 3111 people who were offered the oral health assessment (OHA), 2525 were examined. Adults below 50 years of age (n=17) and 4 respondents whose oral health data were unavailable at time of analysis were omitted, giving a final sample of 2504 respondents.  Among the OHA sample, 9.9% (249) were edentate; 11.5% (159) of females and 8% (90) of males. Of those aged 65 years and older, 15.6% were edentate compared with 40.9% in 2000-02. The mean number of teeth present in those aged 65 years or older was 14.9 for males and 14.2 for females compared with 9.9 and 7.4, respectively, in 2000-02. 56.8% of the dentate sample had 10 or more tooth contacts. The mean DMFT of those aged 50 years or more was 18.5 and the Root Caries Index (RCI) was 6.3. For adults aged 65 years and over, the mean DMFT decreased from 25.9 to 20.1 and the Root Caries Index decreased from 11.6 to 9.1, between 2000-02 and 2014-15. Conclusion: The results suggest an improvement in oral health status of community dwelling adults aged 50 years and over in Ireland as compared to the previous Irish survey of 2000-02.

To Evaluate the Severity, Distribution of Occlusal Tooth Wear and its Correlation with Bite Force in Young North Indian Adults

AIM

To determine the severity and distribution of occlusal tooth wear among young North Indian adults and to evaluate the correlation of occlusal tooth wear with bite force.

MATERIALS AND METHODS

A total of 164 subjects were enrolled in the present study. Inclusion criteria included subjects with age range of 25-40 years having a full complement of natural dentition (excluding third molars), with no history of orthodontic treatment, FPD and trauma. Maxillary and mandibular casts of each subject were taken. Tooth wear score of anterior and posterior teeth of both the arches was calculated using a five-point (0 to 4) ordinal scoring system. The calculated tooth wear scores were then compared with data concerning age, sex, number of daily meals, vegetarian/non-vegetarian diet, Group function/Canine guided occlusion and bite force. Nonparametric (Mann-Whitney) test was used to determine the relationship between various factors and occlusal tooth wear. Spearman's correlation coefficient was used to determine the correlation between tooth wear and bite force.

RESULTS

After applying statistical analysis to the data collected, total tooth wear score of the whole sample was 30.07 ± 6.39. Anterior teeth had significantly higher wear score than posteriors (P < 0.01). Males showed significantly higher (P < 0.001) tooth wear in both arches factors such as bite force and age showed significant correlation with tooth wear (P=0.000), however, the number of meals taken per day did not show any significant correlation. Higher tooth wear loss was seen in non vegetarian dietary pattern but it was statistically insignificant. It was also found that Group function occlusion showed significantly higher mean tooth wear loss 45.76 ± 9.19 as compared to Canine guided occlusion 26.37 ± 10.68 (P=0.000).

Tooth wear during orthodontic treatment with fixed appliances: a systematic review

OBJECTIVES

Tooth wear, additional to the physiologic alterations of the dentition, may occur during orthodontic treatment. The objective of the present review was to investigate systematically the literature relevant to its progression in patients having undergone comprehensive orthodontic treatment.

DATA SOURCES

Search without restrictions in eight databases since inception and hand searching until October 2017 was performed.

DATA SELECTION

Studies evaluating tooth wear immediately before and after the completion of orthodontic treatment with fixed appliance were evaluated independently and in duplicate.

DATA EXTRACTION

Following study retrieval and selection, data on volumetric and surface tooth wear was extracted. Individual study risk of bias assessment was performed using the Risk Of Bias In Non-randomised Studies - of Interventions (ROBINS-I) tool, and the overall quality of the evidence was assessed with the Grades of Recommendation, Assessment, Development and Evaluation approach.

DATA SYNTHESIS

All three finally included studies reported wear of teeth during the period of treatment but were at serious risk of bias. Two of them investigated tooth wear by 3D volumetric measurements and one used grading scales. The mean volume reduction was 1.02 mm³ per tooth for the incisor group [95% Confidence Interval (CI): 0.84-1.20], 1.62 mm³ for the canines [95% CI: 0.8-2.38; I²= 96%; random effects method] and 0.95 mm³ for premolars and molars [95% CI: 0.84-1.07]. The overall quality of evidence limited the confidence in the observed estimates.

CONCLUSIONS

Varying degrees of tooth wear were reported after comprehensive orthodontic treatment. Further studies are needed in order to elucidate how much is associated with orthodontic treatment and/or physiologic alterations of the dentition.

Tooth wear and gingival recession in 210 orthodontically treated patients: a retrospective cohort study

Aim

To assess the association between tooth wear (TW) and gingival recession (GR).

Materials and Methods

Two hundred and ten orthodontically treated participants (100 males) were evaluated. GR and TW were rated independently by four raters on plaster models at four time points: before treatment (T1), mean age 13.8 years (SD = 3.7); after treatment (T2), mean age 16.7 years (SD = 3.9); 3 years after treatment (T3), mean age 19.7 years (SD = 4.2); and 7 years after treatment (T4), mean age 23.9 years (SD = 4.8). Univariable and mulitvariable random effects logistic regression analyses were performed with scores for GR as dependent variables and with TW, age, gender, dental segments (maxillary and mandibular anterior and posterior segments), time points, and Angle classification as independent variables. Method reliability was assessed with kappa statistics.

Results

Mandibular incisors, mandibular and maxillary first premolars and maxillary first molars were most vulnerable to GR. The prevalence of GR increased during the observation period. At T1 20.5% participants had one or more recession sites, at T4 85.7 % of the participants had at least one GR. There was evidence of association between moderate/severe TW and GR-for a tooth with moderate/severe wear, the odds of recession were 23% higher compared to a tooth with no/mild wear (odds ratio 1.23; 95% CI: 1.08-1.40; P = 0.002). Age, dental segment, and time were also significant recession predictors, whereas gender was not.

Conclusions

There is evidence that moderate/severe TW is associated with the presence of gingival recession. Clinical significance of this can be limited.

Anterior tooth wear and quality of life in a nursing home population

AIMS

The aim of the study was to assess the extent to which a relationship may exist between the wear of the anterior teeth and quality of life in a population of nursing home residents.

METHODS AND RESULTS

A population (n = 100) of nursing home residents (mean age 75.7 years) was recruited all members of which had at least 4 upper and 4 lower anterior teeth and were assessed as cognitively intact by nursing personnel who were familiar with their behavior. The investigator evaluated the level of tooth wear of each subject according to the Tooth Wear Index of Donachie and Walls (Adapted) and then verbally administered the Geriatric Oral Health Assessment Index (GOHAI) of Atchison and Dolan. Analyses did not reveal significant differences in tooth wear between males and females nor between age and GOHAI score; however, tooth wear was positively related to age and inversely related to quality of life.

CONCLUSIONS

Results suggest that tooth wear is negatively related to quality of life.

General and erosive tooth wear of 16-year-old adolescents in Kuantan, Malaysia: prevalence and association with dental caries

Background

The objective of this study was to determine the prevalence and severity of general tooth wear (GTW), i.e. tooth wear irrespective of etiology and erosive tooth wear (ETW), i.e. tooth wear predominantly due to erosion; and also to investigate the relationship between ETW and dental caries experience in 16-year-old adolescents in Kuantan, Malaysia.

Methods

A multi-staged cluster sampling method was employed. A total of 598 16-year-old adolescents participated in this study. Participants’ demographic profile was assessed through a self-administered questionnaire. Clinical examinations were carried out under standardized conditions by a single examiner. The level of GTW was recorded using the modified Smith and Knight’s Tooth Wear Index (TWI) whilst ETW were recorded using the Basic Erosive Wear Examination (BEWE) index. This index was developed to record clinical findings and assist in the decision-making process for the management of erosive tooth wear. Dental caries was recorded using the D₃MFT index whereby D₃ denotes obvious dental decay into dentine detected visually.

Results

The prevalence of GTW, ETW and dental caries, i.e. percentage of individuals found to have at least one lesion, was 99.8%, 45.0% and 27.8% respectively. Two thirds of affected teeth with GTW were observed to have a TWI score of 1 whereas almost all of the affected teeth with ETW had a BEWE score of 2. The mean D₃MFT was 0.62 (95% CI 0.50, 0.73) with Decayed (D) teeth being the largest component, mean D₃T was 0.36 (95% CI 0.30, 0.43). There was no significant association between socio-demographic factors and prevalence of ETW. Logistic regression analysis also showed no significant relationship between the prevalence of ETW and D₃MFT (p > 0.05).

Conclusions

Almost all adolescents examined had GTW but they were mainly early lesions. However, nearly half were found to have ETW of moderate severity (BEWE score 2). No significant relationship between the occurrence of erosive tooth wear and caries was observed in this population.

The potential of statistical shape modelling for geometric morphometric analysis of human teeth in archaeological research

This paper introduces statistical shape modelling (SSM) for use in osteoarchaeology research. SSM is a full field, multi-material analytical technique, and is presented as a supplementary geometric morphometric (GM) tool. Lower mandibular canines from two archaeological populations and one modern population were sampled, digitised using micro-CT, aligned, registered to a baseline and statistically modelled using principal component analysis (PCA). Sample material properties were incorporated as a binary enamel/dentin parameter. Results were assessed qualitatively and quantitatively using anatomical landmarks. Finally, the technique’s application was demonstrated for inter-sample comparison through analysis of the principal component (PC) weights. It was found that SSM could provide high detail qualitative and quantitative insight with respect to archaeological inter- and intra-sample variability. This technique has value for archaeological, biomechanical and forensic applications including identification, finite element analysis (FEA) and reconstruction from partial datasets.

Forensic Age Estimation of Chinese Malaysian Adults by Evaluating Occlusal Tooth Wear Using Modified Kim's Index

Background and Objective

Evaluation of dental attrition is an easy and relatively accurate approach to estimating the age of an adult either ante- or postmortem for some specific population. Dental attrition represents a progressive physiological age change that can be measured using variety of indices to aid as an adjunct in forensic age estimation. Some of the previously proposed indices have their own practical limitations. This paper focuses on using modified Kim's criteria to score dental attrition to estimate the age of Chinese Malaysian adults and validate it.

Methodology

Tooth wear was evaluated on 190 dental models of Chinese Malaysian adults (age range: 20–60 years) using modified Kim's index to custom-derive a population specific linear equation. The same equation was validated further on new 60 dental casts.

Results and Conclusion

Regression analysis revealed good correlation between age and teeth wear and lower standard error of estimate. Test of regression on a test sample (n = 30 pairs, age range: 20–60 years) showed insignificant difference between predicted versus the actual age with statistically acceptable mean absolute difference. These data suggest that modified Kim's index can be used effectively in forensic age estimation.

Dental occlusion analysis in the Mesolithic-Neolithic Age, Bronze Age, and Roman to Medieval times in Serbia: Tooth size comparison in skeletal samples

OBJECTIVE

Anthropological studies have reported that tooth size decreases in the context of diet changes. Some investigations have found a reverse trend in tooth size from the prehistoric to the modern times. The aims of this study were to analyze tooth size in skeletal samples from Mesolithic-Neolithic Age, Bronze Age, and Roman to Medieval times to determine sex differences and establish a temporal trend in tooth size in the aforementioned periods.

DESIGN

Well-preserved permanent teeth were included in the investigation. The mesiodistal (MD) diameter of all teeth and buccolingual (BL) diameter of the molars were measured. Effects of sex and site were tested by one-way ANOVA, and the combined effect of these factors was analyzed by UNIANOVA.

RESULTS

Sexual dimorphism was present in the BL diameters of all molars and MD diameters of the upper first and the lower third molar. The lower canine was the most dimorphic tooth in the anterior region. The MD diameter of most teeth showed no significant difference between the groups, (sample from: Mesolithic-Neolithic Age-group 1; Bronze Age-group 2; Roman times-group 3; Medieval times-group 4), whereas the BL diameters of the upper second and the lower first molar were the largest in the first group. Multiple comparisons revealed a decrease in the BL diameter of the upper second and the lower first molar from the first to the later groups. Lower canine MD diameter exhibited an increase in the fourth group compared to the second group.

CONCLUSION

On the basis of the MD diameter, a temporal trend could not be observed for most of the teeth. The lower canine exhibited an increase in the MD diameter from the prehistoric to the Medieval times. Changes of BL diameter were more homogeneous, suggesting that the temporal trend of molar size decreased from the Mesolithic-Neolithic to Medieval times in Serbia.

A plea for the development of an universally accepted modular tooth wear evaluation system

BACKGROUND

Tooth wear is considered an increasing oral health problem. Due to its multifactorial nature, recognizing and diagnosing of tooth wear is difficult but nevertheless important. Over the years, a wide variety of evaluation systems has been developed, yet none of them is universally accepted. This has implications for both research and clinical practice.

DISCUSSION

This paper describes an in-depth analysis of four commonly used tooth wear evaluation systems, namely, the Eccles index, the Tooth Wear Index, the Lussi index, and the Basic Erosive Wear Examination. Comparing those systems revealed that despite several similarities, they differ considerably from each other. Notably, all four systems have their specific advantages and disadvantages. However, neither one of them meets all necessary characteristics of a hypothetical, broadly applicable tooth wear evaluation system. In fact, it is not realistic that a single system qualifies for all purposes (for example, diagnosing or monitoring individual patients, performing epidemiological studies, etc.). As a potentially feasible solution for this issue, the development of an evaluation system is recommended that consists of multiple, coherent modules, which cover different purposes.

Techniques to Evaluate Dental Erosion: A Systematic Review of Literature

This article reviews different techniques for evaluating dental erosion, weighs the advantages and disadvantages of these techniques, and presents the latest trends in the study of dental erosion. In May 2014, an initial search was carried out in the PubMed/MEDLINE database of indexed journals from 1975 to 2013 using the following keywords: dental erosion; dental erosion In-vitro; and dental erosion in-vivo. Bibliographic citations from the papers found were then used to find other useful sources. The authors categorize the techniques into three classes: in-vitro, in-vivo and in-vitro/in-vivo. The article discusses the instrumentation required to use each of these techniques, as well as their rationale, merits and applications. The emergence of in-vitro/in-vivo techniques offers the potential to accurately quantify tooth wear in clinical situations. Cross-sectional as well as longitudinal studies show that these techniques will improve diagnosis, treatment planning and management of dental erosion.

Tooth wear and quality of life among adults in the United Kingdom

OBJECTIVE

To explore the association between tooth wear and quality of life among adults in the United Kingdom, independently of sociodemographic factors and other common oral conditions.

METHODS

We used data from 5654 dentate adults who participated in the 2009 Adult Dental Health Survey. Tooth wear was assessed during clinical examination and classified as none, mild, moderate and severe based on the worst affected tooth recorded. The numbers of teeth with mild, moderate and severe tooth wear were used as alternative measures. Oral impacts on quality of life were measured using the short form of the Oral Health Impact Profile (OHIP-14). The associations between tooth wear measures and OHIP-14 total and domain scores were tested in negative binomial regression models adjusting for sociodemographic and clinical factors.

RESULTS

Overall, 62% of participants had mild, 13% moderate and 2% severe tooth wear. Adults with severe tooth wear had a crude OHIP-14 total score higher than those without tooth wear (Rate Ratio: 1.90; 95% Confidence Interval: 1.32-2.75). This association was attenuated after adjustment for confounders, particularly for other oral conditions (1.25; 95% CI: 0.90-1.73). Moreover, adults with severe tooth wear reported higher OHIP-14 domain scores in psychological discomfort (1.15; 95% CI: 1.06-1.25) and psychological disability (1.18; 95% CI: 1.10-1.30) than those without such condition. There was also evidence of a dose-response relationship; with higher OHIP-14 domain scores according to the number of teeth with severe tooth wear.

CONCLUSION

This nationwide study among UK adults shows that severe tooth wear was negatively associated with psychological impacts on people's life.

CLINICAL SIGNIFICANCE

Dentist should consider not only the patients' clinical characteristics, but also their impacts on quality of life and provide preventive or restorative management accordingly.

Treating Tooth Surface Loss: Adhesive Restoration of the Worn Anterior Dentition

The treatment of tooth surface loss (TSL) is becoming more common in primary health care and a diverse variety of patients are presenting with this condition are often being treated by general dental practitioners. This article highlights the importance of comprehensive planning and adept execution that can enhance the patient's outcome and experience. Stages of clinical planning and treatment approaches using a selection of restorative materials utilising various established adhesive clinical techniques will be presented and discussed.

Abfraction lesions: etiology, diagnosis, and treatment options

Abfraction is a type of noncarious cervical lesion (NCCL) characterized by loss of tooth tissues with different clinical appearances. Evidence supports that abfraction lesions, as any NCCLs, have a multifactorial etiology. Particularly, the cervical wear of abfraction can occur as a result of normal and abnormal tooth function and may also be accompanied by pathological wear, such as abrasion and erosion. The interaction between chemical, biological, and behavioral factors is critical and helps to explain why some individuals exhibit more than one type of cervical wear mechanism than others. In an era of personalized dentistry, patient risk factors for NCCLs must be identified and addressed before any treatment is performed. Marked variations exist in dental practice concerning the diagnosis and management of these lesions. The lack of understanding about the prognosis of these lesions with or without intervention may be a major contributor to variations in dentists’ management decisions. This review focuses on the current knowledge and available treatment strategies for abfraction lesions. By recognizing that progressive changes in the cervical area of the tooth are part of a physiologically dynamic process that occurs with aging, premature and unnecessary intervention can be avoided. In cases of asymptomatic teeth, where tooth vitality and function are not compromised, abfraction lesions should be monitored for at least 6 months before any invasive procedure is planned. In cases of abfraction associated with gingival recession, a combined restorative-surgical approach may be performed. Restorative intervention and occlusal adjustment are not indicated as treatment options to prevent further tooth loss or progression of abfraction. The clinical decision to restore abfraction lesions may be based on the need to replace form and function or to relieve hypersensitivity of severely compromised teeth or for esthetic reasons.

Trends in the prevalence of erosive tooth wear in Brazilian preschool children

OBJECTIVES

To report trends in the prevalence of ETW in Brazilian preschool children.

METHODS

Three cross-sectional surveys were carried out on boys and girls aged 3-4 years living in Diadema, in the years 2008, 2010 and 2012 following the same criteria and methodology. A total of 2801 children were systematically examined during a National Day of Children's vaccination. Examiners were trained and calibrated to diagnose ETW using a modified version of the O'Brien index.

RESULTS

The prevalence of ETW was 51.6% (95% CI 48.4-55.0) in 2008, 53.9% (95% CI 50.7-57.0) in 2010 and 51.3% (95% CI 47.8-54.7) in 2012. There was no significant association between prevalence of ETW from 2008 to 2012 (χ(2) for trend: P = 0.92). There was no significant association in the severity of ETW during this study's period. Most lesions were confined to enamel in all three studies.

CONCLUSIONS

A high prevalence of ETW was found in this sample of preschool children in 2008, 2010 and 2012. No trends of increase or decrease in the prevalence and severity of ETW during this study's period.