In vitro activity of Carvacrol against titanium-adherent oral biofilms and planktonic cultures

Carvacrol incorporation into novel controlled-release mucoadhesive systems for oral polymicrobial biofilm control

The aim of this study was to evaluate carvacrol antimicrobial activity in polymicrobial biofilms using a novel controlled-release mucoadhesive systems developed from biopolymers. The natural polymers gellan gum and sodium alginate were used in different concentrations for the development of films, tablets and microparticles containing carvacrol. The systems were characterized as regard their morphological characteristics, carvacrol release and mucoadhesion. Furthermore, the antimicrobial activity of the systems was evaluated on polymicrobial biofilms through biomass quantification and microbial viability assessment. Carvacrol release profile from films, tablets and microparticles was similar; nearly 100% of the carvacrol was released within 15 min. Films showed the best mucoadhesion values. Scanning Electron Microscopy images showed that the films presented a continuous and smooth surface, and the tablets showed a continuous surface with a polymer web appearance. The microparticles were spherical in shape. The films containing carvacrol showed the highest biomass and microbial viability reduction, followed by the tablets. The findings of this study showed that carvacrol incorporated into films and tablets presented antimicrobial activity on polymicrobial biofilm. Controlled-release mucoadhesive systems is a process little explored in dentistry, being the differential of this work, and with great innovative potential for the management of dental diseases.

Physical-chemical influences and cell behavior of natural compounds on titanium dental surfaces

The present study evaluated the influence of carvacrol, terpinene-4-ol, and chlorhexidine on the physical-chemical properties of titanium surfaces, cell viability, proliferation, adhesion, and spreading of fibroblasts and osteoblasts in vitro. Titanium surfaces (Ti) were treated with Carvacrol (Cvc), Terpinen-4-ol (T4ol), Chlorhexidine (CHX), DMSO, and ultrapure water (Control group). Physical-chemical modifications were evaluated by surface wettability, the surface free energy (SFE) calculated from the contact angle values using the Owens-Wendt-Rabel-Kaeble (OWRK) equation, scanning electron microscopy (SEM) and energy dispersive spectrometry probe (EDS) system. Cells were seeded onto Ti-treated surfaces and incubated for 24 h and 72 h, then evaluated by Alamar blue assay and fluorescence microscopy. Surfaces treated with Cvc and T4ol showed the presence of Na, O, and Cl. All surfaces showed hydrophilic characteristics and SFE values between 5.5 mN/m and 3.4 mN/m. On the other hand, EDS peaks demonstrated the presence of O and Cl after CHX treatment. A reduction of cell viability and adhesion was noted on titanium surfaces treated with CHX after 24 and 72h. In conclusion, the results indicate that the decontamination with Cvc and T4ol on Ti surfaces does not alter the surface proprieties and allows an adequate interaction with cells involved in the re-osseointegration process such as fibroblasts and osteoblasts.

Dietary components regulate chronic diseases through gut microbiota: a review

In recent years, gut microbiota as an immune organ has gradually become the mainstream of research. When the composition of the gut microbiota is changed significantly, this may affect human health. This review details the major microbiota composition and metabolites in the gut and discusses chronic diseases based on gut dysbiosis, including obesity, liver injury, colon cancer, atherosclerosis, and central nervous system diseases. We comprehensively summarize the changes in abundance of relevant gut microbiota by ingesting different diet components (such as food additives, dietary polyphenols, polysaccharides, fats, proteins) and their influence on the microbial quorum sensing system, thereby regulating related diseases. We believe that quorum sensing can be used as a new entry point to explain the mechanism of ingesting dietary components to improve gut microbiota and thereby regulate related diseases. This review hopes to provide a theoretical basis for future research on improving disease symptoms by ingesting functional foods containing dietary components. © 2023 Society of Chemical Industry.

Antibiofilm Effect of Lavandula multifida Essential Oil: A New Approach for Chronic Infections

Fungal infections are associated with high morbidity and mortality rates, being highly prevalent in patients with underlying health complications such as chronic lung disease, HIV, cancer, and diabetes mellitus. To mitigate these infections, the development of effective antifungals is imperative, with plants standing out as promising sources of bioactive compounds. In the present study, we focus on the antibiofilm potential of Lavandula multifida essential oil (EO) against dermatophyte strains and Candida albicans. The EO was characterized using GC and GC-MS, and its antifungal effect was assessed on both biofilm formation and disruption. Biofilm mass, extracellular matrix, and viability were quantified using crystal violet, safranin, and XTT assays, respectively, and morphological alterations were confirmed using optical and scanning electron microscopy. L. multifida EO showed very high amounts of carvacrol and was very effective in inhibiting and disrupting fungal biofilms. The EO significantly decreased biofilm mass and viability in all tested fungi. In addition, a reduction in dermatophytes' extracellular matrix was observed, particularly during biofilm formation. Morphological alterations were evident in mature biofilms, with a clear decrease in hypha diameter. These promising results support the use of L. multifida EO in the development of effective plant-based antifungal products.

Antimicrobial and Antibiofilm Activities of Carvacrol, Amoxicillin and Salicylhydroxamic Acid Alone and in Combination vs. Helicobacter pylori: Towards a New Multi-Targeted Therapy

The World Health Organization has indicated Helicobacter pylori as a high-priority pathogen whose infections urgently require an update of the antibacterial treatments pipeline. Recently, bacterial ureases and carbonic anhydrases (CAs) were found to represent valuable pharmacological targets to inhibit bacterial growth. Hence, we explored the underexploited possibility of developing a multiple-targeted anti-H. pylori therapy by assessing the antimicrobial and antibiofilm activities of a CA inhibitor, carvacrol (CAR), amoxicillin (AMX) and a urease inhibitor (SHA), alone and in combination. Minimal Inhibitory (MIC) and Minimal Bactericidal (MBC) Concentrations of their different combinations were evaluated by checkerboard assay and three different methods were employed to assess their capability to eradicate H. pylori biofilm. Through Transmission Electron Microscopy (TEM) analysis, the mechanism of action of the three compounds alone and together was determined. Interestingly, most combinations were found to strongly inhibit H. pylori growth, resulting in an additive FIC index for both CAR-AMX and CAR-SHA associations, while an indifferent value was recorded for the AMX-SHA association. Greater antimicrobial and antibiofilm efficacy of the combinations CAR-AMX, SHA-AMX and CAR-SHA against H. pylori were found with respect to the same compounds used alone, thereby representing an innovative and promising strategy to counteract H. pylori infections.

Antibacterial and Antibiofilm Activity of Carvacrol against Oral Pathogenic Bacteria

Faced with the current situation of high rates of microbial resistance, together with the scarcity of new antibiotics, it is necessary to search for and identify new antimicrobials, preferably natural, to alleviate this situation. The aim of this work was to evaluate the antibacterial activity of carvacrol (CAR), a phenolic compound of essential oils, against pathogenic microorganisms causing oral infections, such as Streptococcus mutans and S. sanguinis, never evaluated before. The minimum inhibitory and the minimum bactericidal concentration were 93.4 μg/mL and 373.6 μg/mL, respectively, for the two strains. The growth kinetics under different concentrations of CAR, as well as the bactericidal power were determined. The subinhibitory concentrations delayed and decreased bacterial growth. Its efficacy on mature biofilms was also tested. Finally, the possible hemolytic effect of CAR, not observable at the bactericidal concentrations under study, was evaluated. Findings obtained point to CAR as an excellent alternative agent to safely prevent periodontal diseases. In addition, it is important to highlight the use of an experimental methodology that includes dual-species biofilm and subinhibitory concentration models to determine optimal CAR treatment concentrations. Thus, CAR could be used preventively in mouthwashes or biomaterials, or in treatments to avoid existing antibiotic resistance.

Carvacrol inhibits Streptococcus pyogenes biofilms by suppressing the expression of genes associated with quorum-sensing and reducing cell surface hydrophobicity

Streptococcus pyogenes is a leading cause of chronic and acute infections, including streptococcus pharyngitis. Biofilm formation by S. pyogenes can cause tolerance against antibiotics. Although penicillin remains the first choice of antibiotic for S. pyogenes, alternative approaches have gained interest due to treatment failures and hypersensitive individuals. Carvacrol is a monoterpenoid from herbal plants with selective biocidal activity on S. pyogenes. Therefore, the present study reveals the efficacy of carvacrol in inhibiting and eradicating S. pyogenes biofilm. The antibiofilm activities were investigated using colorimetric assays, microscopy, cell surface hydrophobicity, gene expression analysis, and in-silico analysis. Carvacrol also showed a minimum biofilm inhibitory concentration (MBIC) against S. pyogenes of 125 μg/mL. The electron microscopic and confocal microscopic analyses revealed a dose-dependent suppression of biofilm formation and a reduction in the biofilm thickness by carvacrol. Carvacrol also inhibited the biofilm-associated virulence factors such as cell surface hydrophobicity. Quantitative real-time polymerase chain reaction analysis showed the downregulation of speB, srtB, luxS, covS, dltA, ciaH, and hasA genes involved in biofilm formation. The results suggested the therapeutic potential of carvacrol against biofilm-associated streptococcal infections.

Microbial Biofilm Decontamination on Dental Implant Surfaces: A Mini Review

Introduction

After insertion into the bone, implants osseointegrate, which is required for their long-term success. However, inflammation and infection around the implants may lead to implant failure leading to peri-implantitis and loss of supporting bone, which may eventually lead to failure of implant. Surface chemistry of the implant and lack of cleanliness on the part of the patient are related to peri-implantitis. The only way to get rid of this infection is decontamination of dental implants.

Objective

This systematic review intended to study decontamination of microbial biofilm methods on titanium implant surfaces used in dentistry.

Methods

The electronic databases Springer Link, Science Direct, and PubMed were explored from their inception until December 2020 to identify relevant studies. Studies included had to evaluate the efficiency of new strategies either to prevent formation of biofilm or to treat matured biofilm on dental implant surfaces.

Results and Discussion

In this systematic review, 17 different groups of decontamination methods were summarized from 116 studies. The decontamination methods included coating materials, mechanical cleaning, laser treatment, photodynamic therapy, air polishing, anodizing treatment, radiation, sonication, thermal treatment, ultrasound treatment, chemical treatment, electrochemical treatment, antimicrobial drugs, argon treatment, and probiotics.

Conclusion

The findings suggest that most of the decontamination methods were effective in preventing the formation of biofilm and in decontaminating established biofilm on dental implants. This narrative review provides a summary of methods for future research in the development of new dental implants and decontamination techniques.

From plants to antimicrobials: Natural products against bacterial membranes

Bacterial membrane barrier provides a cytoplasmic environment for organelles of bacteria. The membrane is composed of lipid compounds containing phosphatide protein and a minimal amount of sugars, and is responsible for intercellular transfers of chemicals. Several antimicrobials have been found that affect bacterial cytoplasmic membranes. These compounds generally disrupt the organization of the membrane or perforate it. By destroying the membrane, the drugs can permeate and replace the effective macromolecules necessary for cell life. Furthermore, they can disrupt electrical gradients of the cells through impairment of the membrane integrity. In recent years, considering the spread of microbial resistance and the side effects of antibiotics, natural antimicrobial compounds have been studied by researchers extensively. These molecules are the best alternative for controlling bacterial infections and reducing drug resistance due to the lack of severe side effects, low cost of production, and biocompatibility. Better understanding of the natural compounds' mechanisms against bacteria provides improved strategies for antimicrobial therapies. In this review, natural products with antibacterial activities focusing on membrane damaging mechanisms were described. However, further high-quality research studies are needed to confirm the clinical efficacy of these natural products.

Antimicrobial Effects of Essential Oils on Oral Microbiota Biofilms: The Toothbrush In Vitro Model

The present investigation intended to evaluate the bacteriostatic and bactericidal abilities of clove, oregano and thyme essential oils against oral bacteria in planktonic and biofilm states. Furthermore, aiming to mimic everyday conditions, a toothbrush in vitro model was developed. Determination of the minimum inhibitory concentration, minimum bactericidal concentration, minimum biofilm inhibitory concentration and minimum biofilm eradication concentration were achieved using the microdilution procedure. To simulate the toothbrush environment, nylon fibers were inoculated with oral bacteria, which, after incubation to allow biofilm development, were submitted to contact with the essential oils under study. Thyme and oregano essential oils revealed promising antimicrobial effects, both in growth inhibition and the destruction of cells in planktonic and biofilm states, while clove essential oil showed a weaker potential. Regarding the toothbrush in vitro model, observation of the nylon fibers under a magnifying glass proved the essential oil anti-biofilm properties. Considering the effects observed using the in vitro toothbrush model, a realistic approximation to oral biofilm establishment in an everyday use object, a putative application of essential oils as toothbrush sanitizers to help prevent the establishment of bacterial biofilm can be verified.

Antibiofilm effect of ozonized physiological saline solution on peri-implant-related biofilm

BACKGROUND

Removal of dental plaque and local application of local chemical adjuncts, such as chlorhexidine (CHX), have been used to control and treat peri-implant disease. However, these methods can damage the surface properties of the implants or promote bacterial resistance. The application of ozone as an adjunctive treatment represents a new approach in the management of peri-implantitis. Thus, the purpose of this study was to evaluate the antimicrobial effect of ozonized physiological saline solution in different concentrations against oral biofilms developed on titanium surface.

METHODS

Single and multi-species biofilms of Porphyromonas gingivalis, Fusobacterium nucleatum, and Streptococcus oralis were formed on titanium specimens for 5 days in anaerobic conditions. Biofilms were treated with ozonized saline solution at different concentrations (25, 50, and 80 μg/NmL), for 30 seconds and 1 minute. CHX (0.12%) and saline solution (0.89% NaCl) were used as positive and negative controls, respectively. Bacterial viability was quantified by colony forming units (CFU mL^-1 ), and biofilm images were acquired by confocal laser scanning microscopy (CLSM). Data were analyzed by parametric test (ANOVA) with Tukey post-hoc test (P < 0.05).

RESULTS

Ozonized saline solution showed antibiofilm activity at a concentration of 80 μg/NmL for 30 seconds and 1 minute, reducing, mainly, Porphyromonas gingivalis viability, with 2.78 and 1.7 log₁₀ CFU mL^-1 of reduction in both single and multi-species biofilms, respectively, when compared to the control (saline), whereas CHX reduced 1.4 and 1.2 log₁₀ CFU mL^-1 .

CONCLUSION

Ozonized saline solution has antibiofilm activity, with better effect when applied for 1 minute at 80 μg/NmL, being a promising candidate therapy for the treatment of peri-implant diseases.

Effect of essential oils on oral halitosis treatment: a review

Halitosis is a very common condition which may affect up to 30% of the population. In about 90% of the cases, halitosis originates in the mouth due to inadequate plaque control, periodontal disease, dry mouth, faulty restorations, and in particular due to excessive bacterial growth. Oral malodor is mainly caused by a microbial degradation of amino acids into volatile, bad-smelling gases (volatile sulfur compounds - VSCs). Management of oral malodor is directed primarily at managing and reducing the VSC-producing bacteria count as well as masking the odor. Essential oils have been used for this purpose in traditional medicine for centuries. In the present review, data on the antimicrobial activity of essential oils against relevant oral VSC-producing bacteria are compiled and compared. Additionally, other positive aspects of essential oils with regard to oral odor are considered.

Differences in Sweet Taste Perception and Its Association with the Streptococcus mutans Cariogenic Profile in Preschool Children with Caries

The aim of the study was to verify the hypothesis about differences in sweet taste perception in the group of preschool children with and without caries, and to determine its relationship with cariogenic microbiota and the frequency of sweets consumption in children. The study group included of 63 children aged 2–6 years: 32 with caries and 31 without caries. The study consisted of collecting questionnaire data and assessment of dental status using the decayed, missing, filled in primary teeth index (dmft) and the International Caries Detection and Assessment System (ICDAS II). The evaluation of sweet taste perception was carried out using a specific method that simultaneously assessed the level of taste preferences and the sensitivity threshold for a given taste. The microbiological analysis consisted of the assessment of the quantitative and qualitative compositions of the oral microbiota of the examined children. The sweet taste perception of children with caries was characterized by a lower susceptibility to sucrose (the preferred sucrose solution concentration was >4 g/L) compared to children without caries (in the range ≤ 4 g/L, p = 0.0015, chi-square test). A similar relationship was also observed for frequent snacking between meals (p = 0.0038, chi-square test). The analysis of studied variables showed the existence of a strong positive correlation between the perception of sweet taste and the occurrence and intensity of the cariogenic process (p = 0.007 for dmft; and p = 0.012 for ICDAS II), as well as the frequency of consuming sweets (p ≤ 0.001 for frequent and repeated consumption of sweets during the day, Spearman test) in children with caries. Additionally, children with an elevated sucrose taste threshold were more than 10-times more likely to develop S. mutans presence (OR = 10.21; 95% CI 3.11–33.44). The results of this study suggest the future use of taste preferences in children as a diagnostic tool for the early detection of increased susceptibility to caries through microbial dysbiosis towards specific species of microorganisms.

Antibody-Enabled Antimicrobial Nanocapsules for Selective Elimination of Staphylococcus aureus

Targeted bactericide nanosystems hold significant promise to improve the efficacy of existing antimicrobials for treatment of severe bacterial infections, minimizing the side effects and lowering the risk of the development of antibiotic resistance. In this work, we developed antibody-functionalized nanocapsules (NCs) containing antibacterial essential oil (EO) for selective and effective eradication of Staphylococcus aureus. Antibacterial EO NCs were produced via self-assembly nanoencapsulation in the plant-derived protein zein. The obtained EO NCs were decorated with aminocellulose to provide more reactive surface groups for carboxyl-to-amine immobilization of a antibody that is specific against S. aureus. The antibody-enabled EO NCs (Ab@EO NCs) demonstrated 2-fold higher bactericidal efficacy against the targeted bacterium compared to the pristine EO NCs at the same concentrations. The improved antibacterial effect of the Ab@EO NCs toward S. aureus was also confirmed in a real-time assay by monitoring bacterial cells elimination using a quartz crystal microbalance. Furthermore, the Ab@EO NCs selectively decreased the load and changed the cell morphology of the targeted S. aureus in a mixed inoculum with nontargeted Pseudomonas aeruginosa. Applying the nanoformulated antibacterial actives to an in vitro coculture model of the bacteria and skin fibroblasts resulted in suppression of S. aureus growth while preserving the human cells viability. The novel antibody-enabled antibacterial NCs showed potential for improving the treatment efficacy of staphylococcal infections, minimally affecting the beneficial microbial and human cells.

Photodynamic inactivation using a chlorin-based photosensitizer with blue or red-light irradiation against single-species biofilms related to periodontitis

Chlorin-e6 (Ce6), as a photosensitizer (PS), has demonstrated significant reduction of microorganisms' viability when irradiated by red light. However, the main absorption peak of this PS is located at blue light spectrum, which is less investigated. This study aimed to evaluate the effect of pure-chlorin-e6-mediated photodynamic inactivation (PDI) using different light sources (450 or 660 nm) against biofilms related to periodontitis. Streptococcus oralis, Fusobacterium nucleatum, Porphyromonas gingivalis, and Aggregatibacter actinomycetemcomitans single-species biofilms were developed under proper conditions for five days. PDI was performed using different concentrations of Ce6 (100 and 200 mM), wavelengths (450 and 660 nm) and comparisons were made after colony forming unit and confocal laser scanning microscopy (CLSM) analysis. The use of light and PS were also individually tested. The greatest bacterial elimination was observed in the group where PDI was employed with blue light and concentration of 200 mM for all bacterial strains tested (4.01 log₁₀ for A. actinomycetemcomitans, and total elimination for P. gingivalis and S. oralis), except for F. nucleatum, where 3.46 log₁₀ reduction was observed when red light and 200 mM Ce6 were applied (p < 0.05). The antimicrobial effects of PDI mediated by Ce6 for all single pathogenic biofilms were confirmed by live/dead staining under CLSM analysis. For all single-species biofilms, the use of PDI mediated by chlorin-e6 photosensitizer under blue or red-light irradiation (450 and 660 nm) demonstrated a significant reduction in bacterial viability, but blue light showed a promising higher photobiological effect, encouraging its adjuvant use to basic periodontitis treatment.

Efficacy of carvacrol against resistant rapidly growing mycobacteria in the planktonic and biofilm growth mode

Rapidly growing mycobacteria (RGM) are environmental bacteria found worldwide with a propensity to produce skin and soft-tissue infections. Among them, the most clinically relevant species is Mycobacterium abscessus. Multiple resistance to antibiotics and the ability to form biofilm contributes considerably to the treatment failure. The search of novel anti-mycobacterial agents for the control of biofilm growth mode is crucial. The aim of the present study was to evaluate the activity of carvacrol (CAR) against planktonic and biofilm cells of resistant RGM strains. The susceptibility of RGM strains (n = 11) to antibiotics and CAR was assessed by MIC/MBC evaluation. The CAR activity was estimated by also vapour contact assay. The effect on biofilm formation and preformed biofilm was measured by evaluation of bacterial growth, biofilm biomass and biofilm metabolic activity. MIC values were equal to 64 μg/mL for most of RGM isolates (32–512 μg/mL), MBCs were 2–4 times higher than MICs, and MICs of vapours were lower (16 μg/mL for most RGM isolates) than MICs in liquid phase. Regarding the biofilm, CAR at concentrations of 1/2 × MIC and 1/4 × MIC showed a strong inhibition of biofilm formation (61–77%) and at concentration above the MIC (2–8 × MIC) produced significant inhibition of 4- and 8-day preformed biofilms. In conclusion, CAR could have a potential use, also in vapour phase, for the control of RGM.

Terpinen-4-ol and carvacrol affect multi-species biofilm composition

The aim of this study was to investigate the cytotoxic activity and inhibitory effect of terpinen-4-ol (T4ol) and carvacrol against single- and multi-species biofilms. The toxicity of each compound was tested on oral keratinocytes and evaluated by XTT assay. Inhibition and eradication of single-species biofilms were analyzed by crystal violet assay and the effect on multi-species biofilm composition was evaluated by qPCR. T4ol and carvacrol did not affect the epithelial cell viability, in contrast to chlorhexidine, which showed a high cytotoxic effect. Inhibition and eradication of single-species biofilms treated with T4ol and carvacrol were observed. The same inhibitory effect was observed for multi-species biofilms, especially on periodontal pathogens. In conclusion, specific concentrations of T4ol and carvacrol without toxicity towards the epithelial cells reduced the numbers of periodontal pathogens in single- and multi-species biofilms.

Antimicrobial photodynamic therapy alone or in combination with antibiotic local administration against biofilms of Fusobacterium nucleatum and Porphyromonas gingivalis

Antimicrobial photodynamic therapy (aPDT) kills several planktonic pathogens. However, the susceptibility of biofilm-derived anaerobic bacteria to aPDT is poorly characterized. Here, we evaluated the effect of Photodithazine (PDZ)-mediated aPDT on Fusobacterium nucleatum and Porphyromonas gingivalis biofilms. In addition, aPDT was tested with metronidazole (MTZ) to explore the potential antimicrobial effect of the treatment. The minimum inhibitory concentration (MIC) of MTZ was defined for each bacterial species. Single-species biofilms of each species were grown on polystyrene plates under anaerobic conditions for five days. aPDT was performed by applying PDZ at concentrations of 50, 75 and 100 mg/L, followed by exposure to 50 J/cm² LED light (660 nm) with or without MTZ. aPDT exhibited a significant reduction in bacterial viability at a PDZ concentration of 100 mg/L, with 1.12 log₁₀ and 2.66 log₁₀ reductions for F. nucleatum and P. gingivalis in biofilms, respectively. However, the antimicrobial effect against F. nucleatum was achieved only when aPDT was combined with MTZ at 100× MIC. Regarding P. gingivalis, the combination of PDZ-mediated aPDT at 100 mg/L with MTZ 100× MIC resulted in a 5 log₁₀ reduction in the bacterial population. The potential antimicrobial effects of aPDT in combination with MTZ for both single pathogenic biofilms were confirmed by live/dead staining. These results suggest that localized antibiotic administration may be an adjuvant to aPDT to control F. nucleatum and P. gingivalis biofilms.

In vitro antibacterial and cytotoxic activities of carvacrol and terpinen-4-ol against biofilm formation on titanium implant surfaces

This study evaluated the antibacterial properties of carvacrol and terpinen-4-ol against Porphyromonas gingivalis and Fusobacterium nucleatum and its cytotoxic effects on fibroblast cells. The minimum inhibitory concentration (MIC) and the minimum bactericidal concentration (MBC) were examined. The minimum biofilm inhibition concentration (MBIC) was evaluated by XTT assay. Biofilm decontamination on titanium surfaces was quantified (CFU ml^-1), evaluated by confocal laser scanning microscopy (CLSM) and cytotoxic activity by MTT. The MIC and MBC for carvacrol were 0.007% and 0.002% for P. gingivalis and F. nucleatum, and 0.06% for terpinen-4-ol for both microorganisms. The MBIC for carvacrol was 0.03% and 0.06% for P. gingivalis and F. nucleatum, and for terpinen-4-ol was 0.06% and 0.24%. The results indicated anti-biofilm activity using carvacrol (0.26%, 0.06%) and terpinen-4-ol (0.95%, 0.24%) and showed cytotoxic activity similar to chlorohexidine (CHX). However, terpinen-4-ol (0.24%) showed higher cell viability than other treatments. Carvacrol and terpinen-4-ol showed antibacterial activity in respect of reducing biofilms. Moreover, CHX-like cytotoxicity was observed.

The natural plant compound carvacrol as an antimicrobial and anti-biofilm agent: mechanisms, synergies and bio-inspired anti-infective materials

Carvacrol (5-isopropyl-2-methyl phenol) is a natural compound that occurs in the leaves of a number of plants and herbs including wild bergamot, thyme and pepperwort, but which is most abundant in oregano. The aim of this review is to analyse the scientific data from the last five years (2012-2017) on the antimicrobial and anti-biofilm activities of carvacrol, targeting different bacteria and fungi responsible for human infectious diseases. The antimicrobial and anti-biofilm mechanisms of carvacrol and its synergies with antibiotics are illustrated. The potential of carvacrol-loaded anti-infective nanomaterials is underlined. Carvacrol shows excellent antimicrobial and anti-biofilm activities, and is a very interesting bioactive compound against fungi and a wide range of Gram-positive and Gram-negative bacteria, and being active against both planktonic and sessile human pathogens. Moreover, carvacrol lends itself to being combined with nanomaterials, thus providing an opportunity for preventing biofilm-associated infections by new bio-inspired, anti-infective materials.

Evaluation of the Antimicrobial Activity and Cytotoxicity of Different Components of Natural Origin Present in Essential Oils

Even though essential oils (EOs) have been used for therapeutic purposes, there is now a renewed interest in the antimicrobial properties of phytochemicals and EOs in particular. Their demonstrated low levels of induction of antimicrobial resistance make them interesting for bactericidal applications, though their complex composition makes it necessary to focus on the study of their main components to identify the most effective ones. Herein, the evaluation of the antimicrobial action of different molecules present in EOs against planktonic and biofilm-forming Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli) bacteria was assessed. The bactericidal mechanisms of the different molecules, as well as their cytocompatibility, were also studied. Carvacrol, cinnamaldehyde, and thymol exhibit the highest in vitro antimicrobial activities against E. coli and S. aureus, with membrane disruption the bactericidal mechanism identified. The addition of those compounds (≥0.5 mg/mL) hampers S. aureus biofilm formation and partially eliminates preformed biofilms. The subcytotoxic values of the tested EO molecules (0.015–0.090 mg/mL) are lower than the minimum inhibitory and bactericidal concentrations obtained for bacteria (0.2–0.5 mg/mL) but are higher than that obtained for chlorhexidine (0.004 mg/mL), indicating the reduced cytotoxicity of EOs. Therefore, carvacrol, cinnamaldehyde, and thymol are molecules contained in EOs that could be used against E. coli– and S. aureus–mediated infections without a potential induction of bactericidal resistance and with lower cell toxicity than the conventional widely used chlorhexidine.

Phenalen-1-one-Mediated Antimicrobial Photodynamic Therapy: Antimicrobial Efficacy in a Periodontal Biofilm Model and Flow Cytometric Evaluation of Cytoplasmic Membrane Damage

In light of increasing resistance toward conventional antibiotics and antiseptics, antimicrobial photodynamic therapy (aPDT) may be a valuable alternative, especially for use in dentistry. In this regard, photosensitizers (PS) based on a phenalen-1-one structure seem to be especially favorable due to their high singlet oxygen quantum yield. However, the actual target structures of phenalen-1-one-mediated aPDT are still unclear. The aim of the present study was to investigate the antimicrobial efficacy of aPDT mediated by phenalen-1-one derivatives SAPYR and SAGUA for inactivation of a polymicrobial biofilm consisting of three putative periodontal pathogens in vitro and to get first insights in the mechanism of action of phenalen-1-one-mediated aPDT by assessing damage of cytoplasmic membranes. aPDT with SAPYR exhibited identical antimicrobial efficacy as compared to chlorhexidine (CHX) [4.4-6.1 log₁₀ reduction of colony forming units (CFUs) depending on bacterial species] while aPDT with SAGUA was less effective (2.0-2.8 log₁₀). Flow cytometric analysis combined with propidium iodide (PI) staining revealed no damage of cytoplasmic membranes after aPDT with both phenalen-1-one derivatives, which was confirmed by spectroscopic measurements for release of nucleic acids after treatment. Spectrophotometric PS-uptake measurements showed no uptake of SAPYR by bacterial cells. Despite the inability to pinpoint the actual target of phenalen-1-one-mediated aPDT, this study shows the high antimicrobial potential of phenalen-1-on mediated aPDT (especially when using SAPYR) and represents a first step for getting insights in the mechanism and damage patterns of aPDT with this class of PS.

An in vitro model of Fusobacterium nucleatum and Porphyromonas gingivalis in single- and dual-species biofilms

Purpose

The goal of this study was to develop and validate a standardized in vitro pathogenic biofilm attached onto saliva-coated surfaces.

Methods

Fusobacterium nucleatum (F. nucleatum) and Porphyromonas gingivalis (P. gingivalis) strains were grown under anaerobic conditions as single species and in dual-species cultures. Initially, the bacterial biomass was evaluated at 24 and 48 hours to determine the optimal timing for the adhesion phase onto saliva-coated polystyrene surfaces. Thereafter, biofilm development was assessed over time by crystal violet staining and scanning electron microscopy.

Results

The data showed no significant difference in the overall biomass after 48 hours for P. gingivalis in single- and dual-species conditions. After adhesion, P. gingivalis in single- and dual-species biofilms accumulated a substantially higher biomass after 7 days of incubation than after 3 days, but no significant difference was found between 5 and 7 days. Although the biomass of the F. nucleatum biofilm was higher at 3 days, no difference was found at 3, 5, or 7 days of incubation.

Conclusions

Polystyrene substrates from well plates work as a standard surface and provide reproducible results for in vitro biofilm models. Our biofilm model could serve as a reference point for studies investigating biofilms on different surfaces.

Carvacrol is highly disruptive against coagulase-negative staphylococci in in vitro biofilms

AIM

To evaluate the antimicrobial activity of carvacrol against stationary-phase planktonic and biofilm cells of coagulase-negative staphylococci and comparison to traditional antistaphylococcal antibiotics.

MATERIALS & METHODS

The antimicrobial effect of carvacrol and antibiotics against planktonic and biofilm cells were assessed through quantification of the number of culturable and/or viable cells. Confocal laser scanning microscopy was used to evaluate the effect of carvacrol on the biofilm structure.

RESULTS

A concentration of 4 mM of carvacrol demonstrated a potent antimicrobial effect, vastly superior than ciprofloxacin, rifampicin, gentamicin and vancomycin, both in planktonic and biofilm cells.

CONCLUSION

Carvacrol is a potential antimicrobial agent, which applicability for the prevention and/or treatment of coagulase-negative staphylococci biofilm-associated infections is worthwhile investigating in more detail.

Thymbra capitata essential oil as potential therapeutic agent against Gardnerella vaginalis biofilm-related infections

Aim: To evaluate the antibacterial activity of Thymbra capitata essential oil and its main compound, carvacrol, against Gardnerella vaginalis grown planktonically and as biofilms, and its effect of vaginal lactobacilli. Materials & methods: Minimal inhibitory concentration, minimal lethal concentration determination and flow cytometry analysis were used to assess the antibacterial effect against planktonic cells. Antibiofilm activity was measured through quantification of biomass and visualization of biofilm structure by confocal laser scanning microscopy. Results: T. capitata essential oil and carvacrol exhibited a potent antibacterial activity against G. vaginalis cells. Antibiofilm activity was more evident with the essential oil than carvacrol. Furthermore, vaginal lactobacilli were significantly more tolerant to the essential oil. Conclusion: T. capitata essential oil stands up as a promising therapeutic agent against G. vaginalis biofilm-related infections.

New approaches to combat Porphyromonas gingivalis biofilms

In nature, bacteria predominantly reside in structured, surface-attached communities embedded in a self-produced, extracellular matrix. These so-called biofilms play an important role in the development and pathogenesis of many infections, as they are difficult to eradicate due to their resistance to antimicrobials and host defense mechanisms. This review focusses on the biofilm-forming periodontal bacterium Porphyromonas gingivalis. Current knowledge on the virulence mechanisms underlying P. gingivalis biofilm formation is presented. In addition, oral infectious diseases in which P. gingivalis plays a key role are described, and an overview of conventional and new therapies for combating P. gingivalis biofilms is given. More insight into this intriguing pathogen might direct the development of better strategies to combat oral infections.

Evaluation of the Antibacterial Potential of Liquid and Vapor Phase Phenolic Essential Oil Compounds against Oral Microorganisms

The aim of the present study was to determine the antibacterial activities of the phenolic essential oil (EO) compounds hinokitiol, carvacrol, thymol, and menthol against oral pathogens. Aggregatibacter actinomycetemcomitans, Streptococcus mutans, Methicillin-resistant Staphylococcus aureus (MRSA), and Escherichia. coli were used in this study. The minimum inhibitory concentrations (MICs), minimum bactericidal concentrations (MBCs), bacterial growth curves, temperature and pH stabilities, and synergistic effects of the liquid and vapor EO compounds were tested. The MIC/MBC of the EO compounds, ranging from the strongest to weakest, were hinokitiol (40-60 μg/mL/40-100 μg/mL), thymol (100-200 μg/mL/200-400 μg/mL), carvacrol (200-400 μg/mL/200-600 μg/mL), and menthol (500-more than 2500 μg/mL/1000-more than 2500 μg/mL). The antibacterial activities of the four EO phenolic compound based on the agar diffusion test and bacterial growth curves showed that the four EO phenolic compounds were stable under different temperatures for 24 h, but the thymol activity decreased when the temperature was higher than 80°C. The combination of liquid carvacrol with thymol did not show any synergistic effects. The activities of the vaporous carvacrol and thymol were inhibited by the presence of water. Continual violent shaking during culture enhanced the activity of menthol. Both liquid and vaporous hinokitiol were stable at different temperatures and pH conditions. The combination of vaporous hinokitiol with zinc oxide did not show synergistic effects. These results showed that the liquid and vapor phases of hinokitiol have strong anti-oral bacteria abilities. Hinokitiol has the potential to be applied in oral health care products, dental materials, and infection controls to exert antimicrobial activity.

Characterization of biosurfactants produced by Lactobacillus spp. and their activity against oral streptococci biofilm

Lactic acid bacteria (LAB) can interfere with pathogens through different mechanisms; one is the production of biosurfactants, a group of surface-active molecules, which inhibit the growth of potential pathogens. In the present study, biosurfactants produced by Lactobacillus reuteri DSM 17938, Lactobacillus acidophilus DDS-1, Lactobacillus rhamnosus ATCC 53103, and Lactobacillus paracasei B21060 were dialyzed (1 and 6 kDa) and characterized in term of reduction of surface tension and emulsifying activity. Then, aliquots of the different dialyzed biosurfactants were added to Streptococcus mutans ATCC 25175 and Streptococcus oralis ATCC 9811 in the culture medium during the formation of biofilm on titanium surface and the efficacy was determined by agar plate count, biomass analyses, and flow cytometry. Dialyzed biosurfactants showed abilities to reduce surface tension and to emulsifying paraffin oil. Moreover, they significantly inhibited the adhesion and biofilm formation on titanium surface of S. mutans and S. oralis in a dose-dependent way, as demonstrated by the remarkable decrease of cfu/ml values and biomass production. The antimicrobial properties observed for dialyzed biosurfactants produced by the tested lactobacilli opens future prospects for their use against microorganisms responsible of oral diseases.

Predicting biofilm thickness and biofilm viability based on the concentration of carbon-nitrogen-phosphorus by support vector regression

Current tools to predict biofilm thickness and viability in spatial distribution are poor, especially those based on chemical oxygen demand (COD), total nitrogen (TN), and total phosphate (TP) due to their limited data and complex calculations. Here, support vector regression (SVR) was used to predict biofilm thickness and viability in a reactor filled with carriers of crushed stone globular aggregates. Analyses combined confocal laser scanning microscopy and flow cytometry with Kriging interpolation revealed that biofilm thickness varied from 22 to 31 μm, and biofilm viability decreased from 80 to 30% in the flow direction of the reactor. The biofilm thickness at the bottom was thicker than that in the upper layer, but biofilm viability contrasted with biofilm thickness in the vertical distribution. The values of biofilm thickness and viability were predicted at a layer 35 cm from the bottom of the reactor with mean squared error values of 0.014 and 0.011, respectively. Correlation coefficients were 0.996 and 0.997 between carbon-nitrogen-phosphorus (C-N-P) removal with biofilm thickness and viability in spatial distribution, respectively. This study provided an important mathematical method to predict biofilm thickness and viability in spatial distribution based on the concentration of C-N-P.

Pathogens protection against the action of disinfectants in multispecies biofilms

Biofilms constitute the prevalent way of life for microorganisms in both natural and man-made environments. Biofilm-dwelling cells display greater tolerance to antimicrobial agents than those that are free-living, and the mechanisms by which this occurs have been investigated extensively using single-strain axenic models. However, there is growing evidence that interspecies interactions may profoundly alter the response of the community to such toxic exposure. In this paper, we propose an overview of the studies dealing with multispecies biofilms resistance to biocides, with particular reference to the protection of pathogenic species by resident surface flora when subjected to disinfectants treatments. The mechanisms involved in such protection include interspecies signaling, interference between biocides molecules and public goods in the matrix, or the physiology and genetic plasticity associated with a structural spatial arrangement. After describing these different mechanisms, we will discuss the experimental methods available for their analysis in the context of complex multispecies biofilms.

Chemistry and multibeneficial bioactivities of carvacrol (4-isopropyl-2-methylphenol), a component of essential oils produced by aromatic plants and spices

Aromatic plants produce organic compounds that may be involved in the defense of plants against phytopathogenic insects, bacteria, fungi, and viruses. One of these compounds, called carvacrol, which is found in high concentrations in essential oils such as oregano, has been reported to exhibit numerous bioactivities in cells and animals. This integrated overview surveys and interprets our present knowledge of the chemistry and analysis of carvacrol and its beneficial bioactivities. These activities include its antioxidative properties in food (e.g., lard, sunflower oil) and in vivo and the inhibition of foodborne and human antibiotic-susceptible and antibiotic-resistant pathogenic bacteria, viruses, pathogenic fungi and parasites, and insects in vitro and in human foods (e.g., apple juice, eggs, leafy greens, meat and poultry products, milk, oysters) and food animal feeds and wastes. Also covered are inhibitions of microbial and fungal toxin production and the anti-inflammatory, analgesic, antiarthritic, antiallergic, anticarcinogenic, antidiabetic, cardioprotective, gastroprotective, hepatoprotective, and neuroprotective properties of carvacrol as well as metabolic, synergistic, and mechanistic aspects. Areas for future research are also suggested. The collated information and suggested research might contribute to a better understanding of agronomical, biosynthetic, chemical, physiological, and cellular mechanisms of the described health-promoting effects of carvacrol, and facilitate and guide further studies needed to optimize the use of carvacrol as a multifunctional food in pure and encapsulated forms, in edible antimicrobial films, and in combination with plant-derived and medical antibiotics to help prevent or treat animal and human diseases.