Synthesis and application of titanium dioxide photocatalysis for energy, decontamination and viral disinfection: a review

Synergistic spatial separation effect of internal electric field in ALD-generated BiFeO3/CuO@Co Z-type heterojunction for enhanced photocatalytic water oxidation

Altering the electron distribution within a catalyst to manipulate internal charge migration pathways is an effective strategy for achieving high efficiency in carrier separation and migration, which is essential for the advancement of photocatalytic water oxidation technologies. We have employed atomic layer deposition (ALD) to construct a BiFeO3/CuO (BFO/CuO) heterojunction with a specific CuO thickness, resulting in a Z-type junction (BFO/CuO50) characterized by a robust internal electric field. This junction facilitates the spatial separation of charge carriers, thereby enhancing their migration efficiency. Moreover, we introduced cobalt-based co-catalysts onto the BFO/CuO50 surface, leading to the creation of reactive centers that enrich holes, thus crafting a three-dimensional composite with superior carrier excitation and separation capabilities. The optimized catalyst, denoted as BFO/CuO50@Co0.1%, demonstrated to produce oxygen at a rate of 1.53 mmol g-1 h-1 and remarkable stability. These findings provide the direction for research and design in the domain of photocatalytic oxygen evolution, offering a guidance for the development of complete water-splitting ferroelectric catalysts which enhance the generation and separation of photo-driven charge carriers.

Covalent Organic Frameworks for Green Energy: Synthesis, Properties, and Applications

Covalent organic frameworks (COFs) are a new type of porous organic crystalline material, which have become an emerging platform for promoting the development of green energy technology due to their high surface area, adjustable pores, low skeleton density, and easy functionalization. In recent years, with the continuous advancement of synthesis technology, the synthesis efficiency and sustainability of COFs have been significantly improved, from traditional solvothermal methods to the emergence of various green synthesis strategies such as ion thermal, mechanochemical, and ultrasound assisted methods. This article reviews the main synthesis methods of COFs and explores their applications in the field of green energy, such as photocatalysis, gas adsorption and separation, electrocatalysis, battery, supercapacitor and Proton exchange membrane fuel cell. By analyzing the performance and mechanism of COFs in these applications in detail, this article further looks forward to the challenges and future development trends faced by COFs in green energy technology, aiming to provide valuable reference and inspiration for researchers in related fields.

Sustainable Electrospun Hybrid Nanofibers for Triboelectric Nanogenerators

Triboelectric nanogenerators (TENGs) have emerged as potential energy-harvesting modules for miniaturized devices. TENG modules are derived often from components having low sustainability whereas the current environmental and economic circumstances demand a focus on sustainable, ecologically friendly approaches for the development of advanced hybrid materials. Herein, recycled polyethylene terephthalate (PET) along with commercially available nylon are electrospun into nanofibers for TENG devices. The obtained nanofibers are characterized using microscopy, spectroscopy, and thermal and mechanical analysis. Electrospinning of pristine and titanium dioxide nanoparticles (TiO2 NPs) blended polymer solutions resulted in uniform nanofibers without beads. The addition of TiO2 NPs improved the thermal properties and significantly improved the mechanical stability of the nanofibers. The performance of the fabricated TENG device has been improved by functionalizing the nanofibers with TiO2 NPs. Particularly, the combination of pristine PET and TiO2 NPs (5%) functionalized nylon nanofibers reached a peak power density of 23.44 mW m- 2 with a surface charge density of 6.81 µC m- 2, a max output voltage of 111 V and a max current of -1.61µA. This study opens a new avenue to utilize upcycled cost-effective polymers processed using electrospinning as a powerful tool for the fabrication of the next generation of sustainable TENG devices.

Platinum Single Atoms Strongly Promote Superoxide Formation in Titania-Based Photocatalysis - Platinum Nanoparticles Don't

The selective reduction of molecular oxygen to superoxide is one of the key reactions in electrochemistry and photocatalysis. Here the effect of Pt co-catalysts, dispersed on titania, either as single atoms or as nanoparticles, on the photocatalytic superoxide (•O2 -) formation in O2 containing solutions is investigated. The •O2 - formation is traced by nitroblue tetrazolium (NBT) assays and in detail by EPR measurements using TEMPO as •O2 - radical scavenger. The results show that the photocatalytic formation rate of •O2 - on titania can strongly be enhanced by using Pt single atoms as a co-catalyst, whereas Pt nanoparticles hardly exhibit any accelerating effect. This finding is of considerable significance regarding photocatalytic degradation and photocatalytic oxidative synthesis processes.

The Role of Nanoparticles in Wine Science: Innovations and Applications

Viticulture, the science of growing, cultivating, and harvesting grapes, and enology, the art and science of making wine, are rapidly evolving through innovative approaches aimed at improving the quality and efficiency of grape and wine production. This review explores the emerging use of nanoparticles, in particular gold, silver, and magnetic nanoparticles, to improve the quality, safety, and sustainability of both grape growing and winemaking processes. The unique properties of these nanoparticles, such as their small size, high surface area, and distinct chemical properties, enable them to address key challenges within the industry. In viticulture, nanoparticles have shown potential in protecting vines from pathogens, optimizing grape yield, and improving quality. In enology, nanoparticles are making a significant contribution to microbial control, reducing spoilage and refining wine analysis techniques, leading to improved product quality and safety. This review also highlights the synergy between different types of nanoparticles and their diverse applications, from microbial control in wine production to their use in innovative packaging solutions. In addition, nanoparticles have the potential to reduce dependence on agrochemicals and improve the sustainability of wine production, which is a promising avenue for future research. However, the integration of nanoparticles in viticulture and enology also poses regulatory and safety challenges, including the potential for nanoparticles to leach into wine products. Further research and regulatory advances are essential to ensure the safe and effective use of these technologies in winemaking. Overall, nanoparticles offer significant benefits to the wine industry, driving improvements in efficiency, sustainability, and quality.

Tuning surface hydrophilicity of a BiVO4 photoanode through interface engineering for efficient PEC water splitting

This study presents a novel approach to enhance photoelectrochemical (PEC) water oxidation by integrating cobalt phthalocyanine (CoPc) with bismuth vanadate (BVO) via a direct solvothermal method. The as-prepared BVO@CoPc photoanode demonstrated a photocurrent density of 4.0 mA cm-2 at 1.23 V vs. RHE, which is approximately 3.1 times greater than that of the unmodified BVO, and has superior stability. The incident photon-to-current conversion efficiency (IPCE) of the BVO@CoPc photoanode reaches an impressive value of 81%, accompanied by significant enhancements in charge injection efficiency. This excellent performance can be ascribed to the enhanced hydrophilicity with the BVO/CoPc interface engineering, which facilitates interfacial interaction between the electrode and electrolyte, accelerates photogenerated charge carrier transfer and separation. Furthermore, compared to the immersion and drop-casting methods, the BVO@CoPc-S composite photoanode prepared via the solvothermal method exhibits a significant improvement in interfacial contact and surface hydrophilicity. These findings highlight the potential of the strategy based on interfacial hydrophilicity modification to overcome key limitations in PEC water splitting, providing a pathway to more efficient and durable photoanode design.

Progress in photocatalytic degradation of industrial organic dye by utilising the silver doped titanium dioxide nanocomposite

Industrial organic dyes represent a significant portion of pollutants discharged into the environment, particularly by the textile industry. These compounds pose serious threats to living organisms due to their high toxicity. Various techniques have been explored for the degradation of organic dyes, among which heterogeneous photocatalysis utilising titanium dioxide (TiO2) stands out as a promising technology. However, the practical application of TiO2 as photocatalyst has limitations for the following reasons; First, TiO2 has a low sensitivity to visible light due to a large band gap which can be 3.2 eV for the anatase polymorph. Second, the recombination rate of photo-induced electron-hole pairs in TiO2 is very fast. Recent research studies have brought to light that a silver-doped titanium dioxide nanocomposite could be one of the promising answers to these problems. This nanocomposite has garnered significant attention because of its unique features that suggest the manifestation of more effective concepts to minimize the electron-hole recombination and broaden light absorption. This causes Schottky barrier which is essentially created by integrating the silver nanoparticles into titanium dioxide. It is quite significant in decelerating the recombination of the electron-hole pairs, thus increasing photocatalytic activity. Further, it is more effective in that the use of silver also widens the titanium dioxide absorption range to the visible light hence maximizing capture and conversion of broader range of light energies for catalytic reactions. This paper therefore seeks to examine the research background regarding the industrial organic dyes starting with the history of industrial organic dyes before delving into an evaluation of the current and most current research on industrial organic dyes looking at advanced methods of their degradation with specific focus on silver-doped TiO2 for photocatalytic enhancement. This paper also reviews the experimental work concerning the actual photocatalytic degradation process and presents the factors affecting the performance of silver-doped TiO2 nanocomposites by eliminating organic dyes from wastewater. It also encompasses a general background into the various synthesis methods used in the preparation of silver-doped TiO2 nanocomposites. Additionally, challenges and future perspectives in the field are outlined, with a focus on the development of novel strategies to further improve the efficiency and sustainability of silver-doped TiO2 photocatalysts for industrial organic dye degradation. In conclusion, this review offers a significant outlook on the existing literature concerning the silver-doped TiO2 nanocomposites for effective photocatalytic degradation of the industrial organic dyes because of the rising pollution level and helping future researchers in seeking the solutions for environmental issues and developing sustainable wastewater treatment.

Graphene Oxide/Zinc Phthalocyanine Selective Singlet Oxygen Visible-Light Nanosensor for Raman-Inactive Compounds

A novel phthalocyanine-based hybrid nanofilm is for the first time successfully applied as an oxidative platform for surface enhanced Raman spectroscopy (SERS) sensing to fine-resolve Raman-inactive compounds. The hybrid is formed by self-assembly of zinc(II) 2,3,9,10,16,17,23,24-Octa[(3',5'-dicarboxy)-phenoxy]phthalocyaninate (ZnPc*) with the solid-supported monolayer of graphene oxide (GO) mediated by zinc acetate metal cluster. Atomic force microscopy, UV-vis and fluorescence spectroscopies confirm that this simple coordination motive in combination with molecular structure of ZnPc* prevents contact quenching of the light-excited triplet state through aromatic stacking with GO particles. Fluorescence probing with Sensor Green and terephthalic acid as specific indicators of active oxygen intermediates shows that the hybrid nanofilm initiates selective singlet oxygen generation under visible light. Direct one-electron oxidation of tetramethylbenzidine (TMB) (1.0×10-7 m) on the hybrid surface in the presence of 100 nm silver nanoparticles as plasmonic hot-spots under 450-640-nm light irradiation yields well-resolved resonance Raman spectrum of the oxidized form TMB+1. Using these hybrid nanofilms as visible light platforms for redox reaction of target analytes without additional oxidizing agents, the range of Raman-detectable compounds can be significantly expanded through a rapid ultrasensitive SERS screening of substances currently considered Raman-inactive.

Clay Minerals/TiO2 Composites-Characterization and Application in Photocatalytic Degradation of Water Pollutants

TiO2 used for photocatalytic water purification is most active in the form of nanoparticles (NP), but their use is fraught with difficulties in separation from solution or/and a tendency to agglomerate. The novel materials designed in this work circumvent these problems by immobilizing TiO2 NPs on the surface of exfoliated clay minerals. A series of TiO2/clay mineral composites were obtained using five different clay components: the Na-, CTA-, or H-form of montmorillonite (Mt) and Na- or CTA-form of laponite (Lap). The TiO2 component was prepared using the inverse microemulsion method. The composites were characterized with X-ray diffraction, scanning/transmission electron microscopy/energy dispersive X-ray spectroscopy, FTIR spectroscopy, thermal analysis, and N2 adsorption-desorption isotherms. It was shown that upon composite synthesis, the Mt interlayer became filled by a mixture of CTA+ and hydronium ions, regardless of the nature of the parent clay, while the structure of Lap underwent partial destruction. The composites displayed high specific surface area and uniform mesoporosity determined by the size of the TiO2 nanoparticles. The best textural parameters were shown by composites containing clay components whose structure was partially destroyed; for instance, Ti/CTA-Lap had a specific surface area of 420 m2g-1 and a pore volume of 0.653 cm3g-1. The materials were tested in the photodegradation of methyl orange and humic acid upon UV irradiation. The photocatalytic activity could be correlated with the development of textural properties. In both reactions, the performance of the most photoactive composites surpassed that of the reference commercial P25 titania.

Biomaterials based on advanced oxidation processes in tooth whitening: fundamentals, progress, and models

The increasing desire for aesthetically pleasing teeth has resulted in the widespread use of tooth whitening treatments. Clinical tooth whitening products currently rely on hydrogen peroxide formulations to degrade dental pigments through oxidative processes. However, they usually cause side effects such as tooth sensitivity and gingival irritation due to the use of high concentrations of hydrogen peroxide or long-time contact. In recent years, various novel materials and reaction patterns have been developed to tackle the issues related to H2O2-based tooth whitening. These can be broadly classified as advanced oxidation processes (AOPs). AOPs generate free radicals that have potent oxidizing properties, which can thereby increase the oxidation power and/or reduce the exposure time and can probably minimize the side effects of tooth bleaching. While there have been several reviews on clinical tooth whitening and the application of novel nanomaterials, a review based on the concept of AOPs in tooth bleaching application has not yet been conducted. This review describes the common types and mechanisms of AOPs, summarizes the latest research progress of new tooth bleaching materials based on AOPs, and proposes a model for tooth bleaching and a rate control step at the molecular level. The paper also reviews the shortcomings and suggests future development directions.

Cutting edge technology for wastewater treatment using smart nanomaterials: recent trends and futuristic advancements

Water is a vital component of our existence. Many human activities, such as improper waste disposal from households, industries, hospitals, and synthetic processes, are major contributors to the contamination of water streams. It is the responsibility of every individual to safeguard water resources and reduce pollution. Among the various available wastewater treatment (WWT) methods, smart nanomaterials stand out for their effectiveness in pollutant removal through absorption and adsorption. This paper examines the application of valuable smart nanomaterials in treating wastewater. Various nanomaterials, including cellulose nanocrystals (CNC), cellulose nanofibrils (CNF), nanoadsorbents, nanometals, nanofilters, nanocatalysts, carbon nanotubes (CNTs), nanosilver, nanotitanium dioxide, magnetic nanoparticles, nanozero-valent metallic nanoparticles, nanocomposites, nanofibers, and quantum dots, are identified as promising candidates for WWT. These smart nanomaterials efficiently eliminate toxic substances, microplastics, nanoplastics, and polythene particulates from wastewater. Additionally, the paper discusses comparative studies on the purification efficiency of nanoscience technology versus conventional methods.

Removal of Hazardous Organic Dyes from Liquid Wastes Using Advanced Nanomaterials

The presence of organic dyes in aqueous environments is extremely hazardous to life due to the toxicity of these compounds. Thus, its removal from these various aquatic media is of the utmost importance, and several technologies are constantly being tested to meet this goal. Among these technologies, various types of degradation and adsorption techniques are typically used, and of the various types of materials used within these technologies, nanomaterials are constantly being developed and investigated, likely due to the various properties that these nanomaterials have. This work reviewed recent developments (in 2023) about the use of these nanomaterials in the treatment of solutions contaminated with these toxic organic dyes.

Perspectives for Photocatalytic Decomposition of Environmental Pollutants on Photoactive Particles of Soil Minerals

The literature shows that both in laboratory and in industrial conditions, the photocatalytic oxidation method copes quite well with degradation of most environmental toxins and pathogenic microorganisms. However, the effective utilization of photocatalytic processes for environmental decontamination and disinfection requires significant technological advancement in both the area of semiconductor material synthesis and its application. Here, we focused on the presence and "photocatalytic capability" of photocatalysts among soil minerals and their potential contributions to the environmental decontamination in vitro and in vivo. Reactions caused by sunlight on the soil surface are involved in its normal redox activity, taking part also in the soil decontamination. However, their importance for decontamination in vivo cannot be overstated, due to the diversity of soils on the Earth, which is caused by the environmental conditions, such as climate, parent material, relief, vegetation, etc. The sunlight-induced reactions are just a part of complicated soil chemistry processes dependent on a plethora of environmental determinates. The multiplicity of affecting factors, which we tried to sketch from the perspective of chemists and environmental scientists, makes us rather skeptical about the effectiveness of the photocatalytic decontamination in vivo. On the other hand, there is a huge potential of the soils as the alternative and probably cheaper source of useful photocatalytic materials of unique properties. In our opinion, establishing collaboration between experts from different disciplines is the most crucial opportunity, as well as a challenge, for the advancement of photocatalysis.

Green synthesis of Vitis vinifera extract-appended magnesium oxide NPs for biomedical applications

Biologically active magnesium oxide (MgO) nanoparticles were synthesised using green reduction with an extract derived from the Vitis vinifera plant. The investigation focused on examining the structure and carbon abundance resulting from the thermal degradation of adsorbed biomolecules. It was accomplished using powder X-ray diffraction, Raman spectroscopy, and FT-IR analysis techniques. X-ray photoelectron spectroscopy studies conducted on MgO nanoparticles indicate the absence of any supplementary peaks, thereby indicating the purity of the material. The morphological characteristics, which have been examined using field emission scanning electron microscopy and TEM methodologies, demonstrate the presence of particles with a spherical shape, exhibiting minimal agglomeration and a uniform distribution across the surfaces of MgO. The porous structure, porosity, and pore volume of the MgO particles were evaluated using Brunauer-Emmett-Teller surface analysis. The experimental findings reveal that the surface area of the MgO nanoparticles is 23.8742 m2/g, while the total pore volume is 0.12528 cm3/g. Additionally, the average pore diameter is determined to be 1.7 nm. These observations collectively suggest the presence of microporous structures within the MgO nanoparticles. This article discusses the biological studies to assess the antibacterial, antifungal, anti-inflammatory, and anti-diabetic activities of the synthesised MgO nanoparticles.

TiO2 Nanoparticles with Adjustable Phase Composition Prepared by an Inverse Microemulsion Method: Physicochemical Characterization and Photocatalytic Properties

Titania nanoparticles (NPs) find wide application in photocatalysis, photovoltaics, gas sensing, lithium batteries, etc. One of the most important synthetic challenges is maintaining control over the polymorph composition of the prepared nanomaterial. In the present work, TiO2 NPs corresponding to anatase, rutile, or an anatase/rutile/brookite mixture were obtained at 80 °C by an inverse microemulsion method in a ternary system of water/cetyltrimethylammonium bromide/1-hexanol in a weight ratio of 17:28:55. The only synthesis variables were the preparation of the aqueous component and the nature of the Ti precursor (Ti(IV) ethoxide, isopropoxide, butoxide, or chloride). The materials were characterized with X-ray diffraction, scanning/transmission electron microscopy, N2 adsorption-desorption isotherms, FTIR and Raman vibrational spectroscopies, and diffuse reflectance spectroscopy. The synthesis products differed significantly not only in phase composition, but also in crystallinity, textural properties, and adsorption properties towards water. All TiO2 NPs were active in the photocatalytic decomposition of rhodamine B, a model dye pollutant of wastewater streams. The mixed-phase anatase/rutile/brookite nanopowders obtained from alkoxy precursors showed the best photocatalytic performance, comparable to or better than the P25 reference. The exceptionally high photoactivity was attributed to the advantageous electronic effects known to accompany multiphase titania composition, namely high specific surface area and strong surface hydration. Among the single-phase materials, anatase samples showed better photoactivity than rutile ones, and this effect was associated, primarily, with the much higher specific surface area of anatase photocatalysts.

The Fabrication and Property Characterization of a Ho2YSbO7/Bi2MoO6 Heterojunction Photocatalyst and the Application of the Photodegradation of Diuron under Visible Light Irradiation

A novel photocatalytic nanomaterial, Ho2YSbO7, was successfully synthesized for the first time using the solvothermal synthesis technique. In addition, a Ho2YSbO7/Bi2MoO6 heterojunction photocatalyst (HBHP) was prepared via the hydrothermal fabrication technique. Extensive characterizations of the synthesized samples were conducted using various instruments, such as an X-ray diffractometer, a Fourier transform infrared spectrometer, a Raman spectrometer, a UV-visible spectrophotometer, an X-ray photoelectron spectrometer, and a transmission electron microscope, as well as X-ray energy dispersive spectroscopy, photoluminescence spectroscopy, a photocurrent test, electrochemical impedance spectroscopy, ultraviolet photoelectron spectroscopy, and electron paramagnetic resonance. The photocatalytic activity of the HBHP was evaluated for the degradation of diuron (DRN) and the mineralization of total organic carbon (TOC) under visible light exposure for 152 min. Remarkable removal efficiencies were achieved, with 99.78% for DRN and 97.19% for TOC. Comparative analysis demonstrated that the HBHP exhibited markedly higher removal efficiencies for DRN compared to Ho2YSbO7, Bi2MoO6, or N-doped TiO2 photocatalyst, with removal efficiencies 1.13 times, 1.21 times, or 2.95 times higher, respectively. Similarly, the HBHP demonstrated significantly higher removal efficiencies for TOC compared to Ho2YSbO7, Bi2MoO6, or N-doped TiO2 photocatalyst, with removal efficiencies 1.17 times, 1.25 times, or 3.39 times higher, respectively. Furthermore, the HBHP demonstrated excellent stability and reusability. The mechanisms which could enhance the photocatalytic activity remarkably and the involvement of the major active species were comprehensively discussed, with superoxide radicals identified as the primary active species, followed by hydroxyl radicals and holes. The results of this study contribute to the advancement of efficient heterostructural materials and offer valuable insights into the development of sustainable remediation strategies for addressing DRN contamination.

A Comprehensive Review on Modification of Titanium Dioxide-Based Catalysts in Advanced Oxidation Processes for Water Treatment

It has become necessary to develop effective strategies to prevent and reduce water pollution as a result of the increase in dangerous pollutants in water reservoirs. Consequently, there is a need to design new catalyst materials to promote the efficiency of advanced oxidation processes (AOPs) in the field of wastewater treatment plant to ensure the mineralization of trace organic contaminants. A notable approach gaining attention involves the coupling of sulfate radicals-based AOPs to photocatalysis or electrocatalysis processes, aiming to achieve the complete removal of refractory contaminants into water and carbon dioxide. Titanium dioxide as metal oxide has received great attention for its catalytic application in water purification. TiO2 catalysts offer a multitude of advantages in AOPs. They are characterized by their high photocatalytic activity under both ultraviolet and visible light, making them environmentally friendly due to the absence of toxic byproducts during oxidation. Their versatility is remarkable, finding utility in various AOPs, from photocatalysis to photo-Fenton processes. TiO2's durability ensures long-lasting catalytic activity, which is crucial for continuous treatment processes, and their cost-effectiveness is particularly advantageous. Furthermore, their chemical stability allows it to withstand varying pH conditions. However, the large band gap energy and low electrical conductivity hinder the catalytic reaction effectiveness. This review aims to examine various approaches to enhance the catalytic performance of titanium dioxide, with the objective of enabling more efficient water purification methods.

Porphyrin-Based Conjugated Microporous Polymer Loaded with Nanoscale Zerovalent Iron for the Degradation of Organic Pollutants under Visible Light

The degradation of organic dye from waterbodies is of great significance for clean production and environmental remediation. Herein, two porphyrin-based conjugated microporous polymers (CMPs) loaded with nanoscale zerovalent iron (named as Por-CMPs-1-2@nZVI) were successfully fabricated by Sonogashira-Hagihara coupling reactions and the liquid-phase method. The as-synthesized Por-CMPs-1-2@nZVI composites were characterized by various means of analysis, and it was confirmed that Por-CMPs-1-2 loaded with nZVI had good photocatalytic performance. Calculated by ultraviolet-visible spectrum, the band-gap energies of Por-CMPs-1@nZVI and Por-CMPs-2@nZVI were 1.45 and 1.32 eV, respectively, indicating that both can be activated by visible light. The photodegradation of organic dye experiments demonstrated that Por-CMPs-2@nZVI degraded 98.0% of 10 ppm Methylene Blue (MB) within 150 min, which is higher than that of Por-CMPs-1-2 and Por-CMPs-1@nZVI. The experiment of active substance capture and mechanism of ESR confirmed that superoxide anion and hydroxyl radical were the primary valid substances in the photodegradation process of MB. In addition, the preparation of membrane materials was shown to be a successful strategy to realize engineered scale-up production.

Recent advances and new insights on the construction of photocatalytic systems for environmental disinfection

Photocatalysis, as a sustainable and environmentally friendly green technology, has garnered widespread recognition and application across various fields. Especially its potential in environmental disinfection has been highly valued by researchers. This study commences with foundational research on photocatalytic disinfection technology and provides a comprehensive overview of its current developmental status. It elucidates the complexity of the interface reaction mechanism between photocatalysts and microorganisms, providing valuable insights from the perspectives of materials and microorganisms. This study reviews the latest design and modification strategies (Build heterojunction, defect engineering, and heteroatom doping) for photocatalysts in environmental disinfection. Moreover, this study investigates the research focuses and links in constructing photocatalytic disinfection systems, including photochemical reactors, light sources, and material immobilization technologies. It studies the complex challenges and influencing factors generated by different environmental media during the disinfection process. Simultaneously, a comprehensive review extensively covers the research status of photocatalytic disinfection concerning bacteria, fungi, and viruses. It reveals the observable efficiency differences caused by the microstructure of microorganisms during photocatalytic reactions. Based on these influencing factors, the economy and effectiveness of photocatalytic disinfection systems are analyzed and discussed. Finally, this study summarizes the current application status of photocatalytic disinfection products. The challenges faced by the synthesis and application of future photocatalysts are proposed, and the future development in this field is discussed. The potential for research and innovation has been further emphasized, with the core on improving efficiency, reducing costs, and strengthening the practical application of photocatalysis in environmental disinfection.

Detailed Insight into Photocatalytic Inactivation of Pathogenic Bacteria in the Presence of Visible-Light-Active Multicomponent Photocatalysts

The use of heterogeneous photocatalysis in biologically contaminated water purification processes still requires the development of materials active in visible light, preferably in the form of thin films. Herein, we report nanotube structures made of TiO2/Ag2O/Au0, TiO2/Ag2O/PtOx, TiO2/Cu2O/Au0, and TiO2/Cu2O/PtOx obtained via one-step anodic oxidation of the titanium-based alloys (Ti94Ag5Au1, Ti94Cu5Pt1, Ti94Cu5Au1, and Ti94Ag5Pt1) possessing high visible light activity in the inactivation process of methicillin-susceptible S. aureus and other pathogenic bacteria-E. coli, Clostridium sp., and K. oxytoca. In the samples made from Ti-based alloys, metal/metal oxide nanoparticles were formed, which were located on the surface and inside the walls of the NTs. The obtained results showed that oxygen species produced at the surface of irradiated photocatalysts and the presence of copper and silver species in the photoactive layers both contributed to the inactivation of bacteria. Photocatalytic inactivation of E. coli, S. aureus, and Clostridium sp. was confirmed via TEM imaging of bacterium cell destruction and the detection of CO2 as a result of bacteria cell mineralization for the most active sample. These results suggest that the membrane ruptures as a result of the attack of active oxygen species, and then, both the membrane and the contents are mineralized to CO2.

Recent strategies, progress, and prospects of two-dimensional metal carbides (MXenes) materials in wastewater purification: A review

With the rapid development of industrialization, water pollution directly leads to the serious shortage of fresh water. As reported by the World Water Council, nearly 3.8 billion people will face water scarcity by 2030. Therefore, developing advanced nanomaterials to realize wastewater purification is a major challenge. Two-dimensional (2D) transition metal carbides (MXenes), as the emerging 2D layered nanomaterials, have been investigated for the applications of water purification treatment since first reported in 2011. Over 40 different MXenes have been developed for environmental remediation, and dozens more structures and properties are theoretically predicted. Here, we review the advances from the aspects of synthesis strategies for MXenes, purification mechanism, and their applications in wastewater treatment processes. The major points are 1) the synthesis and modification approaches for MXenes such as multi-layered stacked MXenes and delaminated MXenes 2) a discussion of current water remediation over MXene-based materials, 3) a brief introduction for removal behaviors and deep interaction mechanisms, 4) optimization strategies and key points for boosting the remediation performance of MXenes.

Enhancing Visible-Light Photocatalysis with Pd(II) Porphyrin-Based TiO2 Hybrid Nanomaterials: Preparation, Characterization, ROS Generation, and Photocatalytic Activity

Novel hybrid TiO2-based materials were obtained by adsorption of two different porphyrins on the surface of nanoparticles-commercially available 5,10,15,20-tetrakis(4-sulfonatophenyl)porphyrin (TPPS) and properly modified metalloporphyrin-5,10,15,20-tetrakis(2,6-difluoro-3-sulfophenyl)porphyrin palladium(II) (PdF2POH). The immobilization of porphyrins on the surface of TiO2 was possible due to the presence of sulfonyl groups. To further elevate the adsorption of porphyrin, an anchoring linker-4-hydroxybenzoic acid (PHBA)-was used. The synthesis of hybrid materials was proven by electronic absorption spectroscopy, dynamic light scattering (DLS), and photoelectrochemistry. Results prove the successful photosensitization of TiO2 to visible light by both porphyrins. However, the presence of the palladium ion in the modifier structure played a key role in strong adsorption, enhanced charge separation, and thus effective photosensitization. The incorporation of halogenated metalloporphyrins into TiO2 facilitates the enhancement of the comprehensive characteristics of the investigated materials and enables the evaluation of their performance under visible light. The effectiveness of reactive oxygen species (ROS) generation was also determined. Porphyrin-based materials with the addition of PHBA seemed to generate ROS more effectively than other composites. Interestingly, modifications influenced the generation of singlet oxygen for TPPS but not hydroxyl radical, in contrast to PdF2POH, where singlet oxygen generation was not influenced but hydroxyl radical generation was increased. Palladium (II) porphyrin-modified materials were characterized by higher photostability than TPPS-based nanostructures, as TPPS@PHBA-P25 materials showed the highest singlet oxygen generation and may be oxidized during light exposure. Photocatalytic activity tests with two model pollutants-methylene blue (MB) and the opioid drug tramadol (TRML)-confirmed the light dose-dependent degradation of those two compounds, especially PdF2POH@P25, which led to the virtually complete degradation of MB.

Green Synthesis of TiO2 Using Impatiens rothii Hook.f. Leaf Extract for Efficient Removal of Methylene Blue Dye

In this work, TiO2 nanoparticles (NPs) were effectively synthesized by a green method using the Impatiens rothii Hook.f. leaf (IL) extract as a capping and reducing agent. The as-synthesized TiO2 NPs were characterized by different characterization methods such as the Brunauer-Emmett-Teller (BET) analysis, high-resolution transmission electron microscopy (HRTEM), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), diffused reflectance spectroscopy (DRS), and X-ray diffraction (XRD) and Raman spectroscopy. The specific surface area from BET analysis was found to be 65 m2/g. The average crystallite size from XRD analysis and average particle size from SEM analysis were found to be ∼11 and ∼25 nm, respectively. The Raman spectroscopy and XRD results showed that the biosynthesized (IL-TiO2) nanoparticles were purely anatase phase. XPS analysis illustrated the formation of Titania with an oxidation state of +4. The DRS study showcased that a blue-shifted intense absorption peak of IL-TiO2 (3.39 eV) compared to the bulk material reported in the literature (3.2 eV). HRTEM micrograph showed the presence of grain boundary with d spacings of 0.352, 0.245, and 0.190, which correspond to the lattice planes of (101), (004), and (200), respectively. From the EDX analysis, the weight percents of titanium and oxygen were found to be 54.33 and 45.67%, respectively. The photoinduced degradation of methylene blue (MB) dye was investigated in the presence of biosynthesized IL-TiO2 NPs photocatalyst. The effect of parameters like catalyst dosage (30 mg/L), initial concentration of MB (15 ppm), pH (10.5), and contact time (100 min) on the removal efficiency was optimized. The maximum photodegradation efficiency under the optimized conditions was found to be 98%.

Degradation of carbamazepine in surface water: performance of Pd-modified TiO2 and Ce-modified ZnO as photocatalysts

Carbamazepine is a widely used antiepileptic drug to control and treat a variety of disorders that is frequently detected in surface water, and in municipal and urban wastewater. This recalcitrant pollutant could be removed by alternative advanced oxidation technology such as heterogeneous photocatalysis. Ce-modified ZnO and Pd-modified TiO2 were synthesized by a microwave-assisted sol-gel method. According to the characterizations (Raman spectroscopy, UV-Vis diffuse reflectance spectroscopy, scanning electron microscopy, and X-ray photoelectron spectroscopy), a mixture of oxides was determined in both materials: CeO2/ZnO and PdO/TiO2. Photocatalytic degradation of carbamazepine in pure water under visible light (3 h) was assayed. The degradation percentage obtained with each catalyst was 80%, 53%, 20%, and 9% for ZnO, Ce-modified ZnO, TiO2, and Pd-modified TiO2, respectively. The leaching of Zn as a possible source of water contamination was tested, finding the lowest value for Ce-modified ZnO by adjusting the initial pH up to neutrality. Later, an environmentally relevant concentration of carbamazepine (228 µg L-1) was assayed, using local surface water (pH = 8.3). Despite the presence of other compounds in the real water matrix, after 5 h of photocatalysis, a 56% of degradation of the pharmaceutical and low leaching of Zn were achieved. The use of Ce-modified ZnO activated by visible light is a promising strategy for the abatement of pharmaceutical active compounds.

A Calcination-Free Sol-Gel Method to Prepare TiO2 -Based Hybrid Semiconductors for Enhanced Visible Light-Driven Hydrogen Production

In recent years, the sol-gel method has been extensively utilized to develop efficient and stable organic semiconductor composite titanium dioxide (TiO2 ) photocatalysts. However, the high-temperature calcination requirements of this method consume energy during preparation and degrade encapsulated organic semiconductor molecules, resulting in decreased photocatalytic hydrogen production efficiency. In this study, we found that by selecting an appropriate organic semiconductor molecule, 1,4-naphthalene dicarboxylic acid (NA), high-temperature calcination can be avoided in the sol-gel process, yielding an organic-inorganic hybrid material with stable and effective photocatalytic properties. The uncalcined material displayed a hydrogen production rate of 2920±15 μmol g-1  h-1 , which was approximately twice the maximum production rate observed in the calcined material. Likewise, the specific surface area of the uncalcined material, at 252.84 m2  g-1 , was significantly larger compared to the calcined material. Comprehensive analyses confirmed successful NA and TiO2 doping, while UV-vis and Mott-Schottky tests revealed a reduced energy bandgap (2.1 eV) and expanded light absorption range. Furthermore, the material maintained robust photocatalytic activity after a 40-hour cycle test. Our findings demonstrate that by using NA doping without calcination, excellent hydrogen production performance can be achieved, offering a novel approach for environmentally friendly and energy-saving production of organic semiconductor composite TiO2 materials.

Visible light photocatalytic degradation of methylene blue and rhodamine B over silver-doped titanium dioxide nanocomposites supported on Fuller's earth

Silver-doped-titanium dioxide nanoparticles supported on Fuller's earth, prepared by the sol-gel method, were characterized with XRD, TGA, zeta potential, SEM, EDX, TEM, XPS, photoluminescence and UV-DRS measurements. The material, Ag-TiO2-Fuller's earth (AgTF), was tested for photocatalytic activity concerning the degradation of rhodamine B (RhB) and methylene blue (MB) in aqueous solution under visible light irradiation with pH, catalyst dosage, and dye concentration as the process variables. The degradation kinetics indicated pseudo-first-order kinetics with rate constant of (i) 0.55 min-1with 0.12 gL-1AgTF loading, 10-5 M MB at pH 9, and (ii) 0.53 min-1 with 0.08 g L-1 AgTF loading, 5 × 10-5 M RhB at pH 8. The methylene blue degradation was maximum (98.66%) for AgTF loading of 0.12 g L-1 while the maximum RhB degradation (96.34%) was attained with AgTF loading of 0.08 g L-1. With 5 × 10-6M MB concentration, the degradation achieved was 98% in 45 min and 100% in 60 min. One hundred per cent degradation of the dye, RhB (1 × 10-6 M) could be achieved in 30 min with 0.08 g L-1 AgTF at pH 8. The use of Fuller's earth, a cheap, abundant and large surface area support, increases the adsorbability of the dye on the catalyst surface and hence promotes the degradation. The catalyst could be removed easily from the reaction mixture and reused for up to five cycles without any significant decrease in activity. Scavengers such as triethanolamine (TEOA), p-benzoquinone (BQ) and isopropyl alcohol (IPA) were utilized to get some insight into the photocatalysis mechanism.

Water remediation using titanium and zinc oxide nanomaterials through disinfection and photo catalysis process: A review

Various pesticides and organic compounds generated as a result of rapid industrialization and pharmaceutical companies pose a major threat to the environment. Novel photocatalysts based on zinc oxide and titanium oxide exhibit great potential towards absorption of these organic pollutants from wastewater. The photocatalysts possess various extraordinary properties like photocatalytic degradation potential, non-toxic and high stability. However, several limitations are also associated with the applications of these photocatalysts like poor affinity, particle agglomeration, high band gap and recovery issues. Hence, optimization is required to enhance their efficiency and at the same time make them cost effective and sustainable. The review covers the mechanism for water treatment, limitations and development of different modification strategies that improve the removal efficiency of titanium and zinc oxide based photocatalysts. Thus, further research in the field of photocatalysts can be encouraged for carrying out water remediation.

Metal Oxide Nanostructures (MONs) as Photocatalysts for Ciprofloxacin Degradation

In recent years, organic pollutants have become a global problem due to their negative impact on human health and the environment. Photocatalysis is one of the most promising methods for the removal of organic pollutants from wastewater, and oxide semiconductor materials have proven to be among the best in this regard. This paper presents the evolution of the development of metal oxide nanostructures (MONs) as photocatalysts for ciprofloxacin degradation. It begins with an overview of the role of these materials in photocatalysis; then, it discusses methods of obtaining them. Then, a detailed review of the most important oxide semiconductors (ZnO, TiO₂, CuO, etc.) and alternatives for improving their photocatalytic performance is provided. Finally, a study of the degradation of ciprofloxacin in the presence of oxide semiconductor materials and the main factors affecting photocatalytic degradation is carried out. It is well known that antibiotics (in this case, ciprofloxacin) are toxic and non-biodegradable, which can pose a threat to the environment and human health. Antibiotic residues have several negative impacts, including antibiotic resistance and disruption of photosynthetic processes.

Characterization of Various Titanium-Dioxide-Based Catalysts Regarding Photocatalytic Mineralization of Carbamazepine also Combined with Ozonation

Titanium-dioxide-based semiconductors proved to be appropriate for photocatalytic application to efficiently degrade emerging organic pollutants such as various herbicides, pesticides, and pharmaceuticals in waters of environmental importance. The characterization of various TiO2 catalysts, both bare and modified (Ag- and/or N-doped), by mechanochemical treatment was carried out in this work, regarding their structure, morphology, and photocatalytic activity. For the latter investigations, carbamazepine, an antidepressant, proved to be applicable and versatile. The photocatalytic behavior of the catalysts was studied under both UV and visible light. Besides the decomposition efficiency, monitoring the intermediates provided information on the degradation mechanisms. Mechanochemical treatment significantly increased the particle size (from 30 nm to 10 μm), causing a considerable (0.14 eV) decrease in the band gap. Depending on the irradiation wavelength and the catalyst, the activity orders differed, indicating that, in the mineralization processes of carbamazepine, the importance of the different oxidizing radicals considerably deviated, e.g., Ag-TiO2 < DP25-TiO2 < ground-DP25-TiO2 < N-TiO2 ≈ N-Ag-TiO2 for O2•− and N-TiO2 ≈ Ag-TiO2 < N-Ag-TiO2 < ground-DP25-TiO2 ≈ DP25-TiO2 for HO• generation under UV irradiation. Toxicity studies have shown that the resulting intermediates are more toxic than the starting drug molecule, so full mineralization is required. This could be realized by a synergistic combination of heterogeneous photocatalysis and ozonation.