Encapsulation of single quantum dots with mesoporous silica

Deposition of CdSe Nanocrystals in Highly Porous SiO2 Matrices-In Situ Growth vs. Infiltration Methods

Embedding quantum dots into porous matrices is a very beneficial approach for generating hybrid nanostructures with unique properties. In this contribution we explore strategies to dope nanoporous SiO2 thin films made by atomic layer deposition and selective wet chemical etching with precise control over pore size with CdSe quantum dots. Two distinct strategies were employed for quantum dot deposition: in situ growth of CdSe nanocrystals within the porous matrix via successive ionic layer adsorption reaction, and infiltration of pre-synthesized quantum dots. To address the impact of pore size, layers with 10 nm and 30 nm maximum pore diameter were used as the matrix. Our results show that though small pores are potentially accessible for the in situ approach, this strategy lacks controllability over the nanocrystal quality and size distribution. To dope layers with high-quality quantum dots with well-defined size distribution and optical properties, infiltration of preformed quantum dots is much more promising. It was observed that due to higher pore volume, 30 nm porous silica shows higher loading after treatment than the 10 nm porous silica matrix. This can be related to a better accessibility of the pores with higher pore size. The amount of infiltrated quantum dots can be influenced via drop-casting of additional solvents on a pre-drop-casted porous matrix as well as via varying the soaking time of a porous matrix in a quantum dot solution. Luminescent quantum dots deposited via this strategy keep their luminescent properties, and the resulting thin films with immobilized quantum dots are suited for integration into optoelectronic devices.

Fluorescence imaging-guided surgery: current status and future directions

Surgery is one of the most important paradigms for tumor therapy, while fluorescence imaging (FI) offers real-time intraoperative guidance, greatly boosting treatment prognosis. The imaging fidelity heavily relies on not only imaging facilities but also probes for imaging-guided surgery (IGS). So far, a great number of IGS probes with emission in visible (400-700 nm) and near-infrared (NIR 700-1700 nm) windows have been developed for pinpointing disease margins intraoperatively. Herein, the state-of-the-art fluorescent probes for IGS are timely updated, with a special focus on the fluorescent probes under clinical examination. For a better demonstration of the superiority of NIR FI over visible FI, both imaging modalities are critically compared regarding signal-to-background ratio, penetration depth, resolution, tissue autofluorescence, photostability, and biocompatibility. Various types of fluorescence IGS have been summarized to demonstrate its importance in the medical field. Furthermore, the most recent progress of fluorescent probes in NIR-I and NIR-II windows is summarized. Finally, an outlook on multimodal imaging, FI beyond NIR-II, efficient tumor targeting, automated IGS, the use of AI and machine learning for designing fluorescent probes, and the fluorescence-guided da Vinci surgical system is given. We hope this review will stimulate interest among researchers in different areas and expedite the translation of fluorescent probes from bench to bedside.

Deterministic Quantum Light Arrays from Giant Silica-Shelled Quantum Dots

Colloidal quantum dots (QDs) are promising candidates for single-photon sources with applications in photonic quantum information technologies. Developing practical photonic quantum devices with colloidal materials, however, requires scalable deterministic placement of stable single QD emitters. In this work, we describe a method to exploit QD size to facilitate deterministic positioning of single QDs into large arrays while maintaining their photostability and single-photon emission properties. CdSe/CdS core/shell QDs were encapsulated in silica to both increase their physical size without perturbing their quantum-confined emission and enhance their photostability. These giant QDs were then precisely positioned into ordered arrays using template-assisted self-assembly with a 75% yield for single QDs. We show that the QDs before and after assembly exhibit antibunching behavior at room temperature and their optical properties are retained after an extended period of time. Together, this bottom-up synthetic approach via silica shelling and the robust template-assisted self-assembly offer a unique strategy to produce scalable quantum photonics platforms using colloidal QDs as single-photon emitters.

Oxidation of quantum dots encapsulated in block copolymer micelles as a function of polymer terminal charge

Most high-quality quantum dots (QDs) are synthesized in the organic phase, and are often coated with polymers for use in aqueous biological environments. QDs can exhibit fluorescence losses during phase transfer, but evaluating underlying mechanisms (e.g., oxidation, surface etching, loss of colloidal stability) can be challenging because of variation in synthesis methods. Here, fluorescence stability of QDs encapsulated in block co-polymer (BCP) micelles was investigated as a function of BCP terminal functionalization (i.e., -OH, -COOH, and -NH₂ groups) and synthesis method (i.e., electrohydrodynamic emulsification-mediated selfassembly (EE-SA), sonication, and manual shaking). Fluorescence losses, fluorescence intensity, energy spectra, and surface composition were assessed using spectrofluorometry and cathodoluminescence spectroscopy (CL) with integrated X-ray photoemission spectroscopy (XPS). QDs passivated using charged BCPs exhibited 50-80% lower fluorescence intensity than those displaying neutral groups (e.g., -OH), which CL/XPS revealed to result from oxidation of surface Cd to CdO. Fluorescence losses were higher for processes with slow formation speed, but minimized in the presence of poly(vinyl alcohol) (PVA) surfactant. These data suggest slower BCP aggregation kinetics rather than electrostatic chain repulsion facilitated QD oxidation. Thus, polymer coating method and BCP structure influence QD oxidation during phase transfer and should be selected to maximize fast aggregation kinetics.

NIR-Absorbing Mesoporous Silica-Coated Copper Sulphide Nanostructures for Light-to-Thermal Energy Conversion

Plasmonic nanostructures, featuring near infrared (NIR)-absorption, are rising as efficient nanosystems for in vitro photothermal (PT) studies and in vivo PT treatment of cancer diseases. Among the different materials, new plasmonic nanostructures based on Cu_2−xS nanocrystals (NCs) are emerging as valuable alternatives to Au nanorods, nanostars and nanoshells, largely exploited as NIR absorbing nanoheaters. Even though Cu_2−xS plasmonic properties are not linked to geometry, the role played by their size, shape and surface chemistry is expected to be fundamental for an efficient PT process. Here, Cu_2−xS NCs coated with a hydrophilic mesoporous silica shell (MSS) are synthesized by solution-phase strategies, tuning the core geometry, MSS thickness and texture. Besides their loading capability, the silica shell has been widely reported to provide a more robust plasmonic core protection than organic molecular/polymeric coatings, and improved heat flow from the NC to the environment due to a reduced interfacial thermal resistance and direct electron–phonon coupling through the interface. Systematic structural and morphological analysis of the core-shell nanoparticles and an in-depth thermoplasmonic characterization by using a pump beam 808 nm laser, are carried out. The results suggest that large triangular nanoplates (NPLs) coated by a few tens of nanometers thick MSS, show good photostability under laser light irradiation and provide a temperature increase above 38 °C and a 20% PT efficiency upon short irradiation time (60 s) at 6 W/cm² power density.

Thermodynamics of nanocrystal–ligand binding through isothermal titration calorimetry

Manipulations of nanocrystal (NC) surfaces have propelled the applications of colloidal NCs across various fields such as bioimaging, catalysis, electronics, and sensing applications.

Room-Temperature Synthesis of Air-Stable Near-Infrared Emission in FAPbI3 Nanoparticles Embedded in Silica

Hybrid organic-inorganic and all-inorganic metal halide perovskite nanoparticles (PNPs) have shown their excellent characteristics for optoelectronic applications. We report an atmospheric process to embed formamidinium CH(NH2)2PbI3 (FAPbI3) PNPs in silica protective layer at room temperature (approximately 26 °C) employing (3-aminopropyl) triethoxysilane (APTES). The resulting perovskite nanocomposite (PNCs) achieved a high photoluminescence (PL) quantum yield of 58.0% and good stability under atmospheric moisture conditions. Moreover, the PNCs showed high PL intensity over 1 month of storage (approximately 26 °C) and more than 380 min of PNCs solutions in DI water. The studied near-infrared (NIR) light-emitting diode (LED) combined a NIR-emitting PNCs coating and a blue InGaN-based chip that exhibited a 788 nm electroluminescence spectrum of NIR-LEDs under 2.6 V. This may be a powerful tool to track of muscle and disabled patients in the detection of a blood vessel.

Highly stable fluorescent probe based on mesoporous silica coated quantum dots for sensitive and selective detection of Cd2

Cadmium ions have been of crucial concern due to the high biological toxicity and serious environmental risks. Various fluorescent Cd-sensitive probes have been reported with improved sensing properties, but still severely suffer from poor stability and insufficient selectivity. In this work, a stable fluorescent probe based on silica encapsulated quantum dots (QDs) have been developed for rapid, sensitive and selective detection of cadmium ion. To improve fluorescence stability, the strategy of mesoporous silica encapsulation was adopted, in which the mesoporous silica shell offers numerous channels for Cd²⁺. Further, the Forster Resonance Energy Transfer (FRET) system, where QDs@mSiO₂and rhodamine B (RB) are used as donors and acceptors respectively, has been constructed, in which the mesoporous silica shell also serves as spacers with tunable thickness for controlling the QD-RB distance. Under optimal conditions, the probes possess a sensitive fluorescence response with a detection limit of 1.25μM. Visual detection can be realized by the obvious fluorescence changes of the FRET system. In addition, the FRET system shows promising sensing performances both in tap water samples and rice-washed water samples, confirming a great potential for practical application.

FRET probe for selective and sensitive detection of vitamin A by cadmium free quantum dots (ZnS)

Vitamin A as a powerful antioxidant plays an important role in human body functions including bone remodeling regulation, healthy immune system and cell growth reproduction. An accurate determination of vitamin A is taken into consideration because of its importance for human health. In this paper, we reported a fluorescence resonance energy transfer (FRET) probe, MPS-capped ZnS QDs, for sensitive and selective detection of vitamin A. The colloidal MPS-capped ZnS QDs were prepared from Zinc acetate and sodium sulfide by employing 3-mercaptopropyltrimethoxysilane (MPS) molecules as the stabilizer or capping agent at the pH condition of 10. The synthesized MPS-capped ZnS QDs were characterized by means of FT-IR, UV-Vis, DLS, and TEM techniques. The sensing behavior of MPS-capped ZnS QDs for selective and sensitive detection of vitamin A, vitamin B₂, vitamin B₆, vitamin E, vitamin K, vitamin H, vitamin D₃ and vitamin C was investigated using fluorescence spectroscopy. The detection mechanism involves photoinduced charge transfer from the surface of ZnS QDs to Vitamin resulting in the fluorescence quenching of ZnS QDs followed by nonradiative fluorescence resonance energy transfer. An excellent selectivity was observed for vitamin A versus other tested species. A linear relationship was observed between the fluorescence intensity of MPS-capped ZnS QDs and the concentration of vitamin A in the range of 3.33-36.66 μM with detection limit of 1.062 μM.

Potential clinical applications of the personalized, disease-specific protein corona on nanoparticles

Nanoscale objects lose their original identity once in contact with biological fluids and get a new biological identity, referred to as a protein corona (PC). The PC modifies many of the physicochemical properties of nanoparticles (NPs), including surface charge, size, and aggregation state. These changes, in turn, affect the biological fate of NPs, including their biodistribution, pharmacokinetics, and therapeutic efficacy. It is well known that even small differences in the composition of a protein source (e.g., plasma and serum) can considerably change the composition of the corona formed on the surface of the same NPs. Recently, it has been shown that the PC is intensely affected by the patient's specific disease. Consequently, the same nanomaterial incubated with proteins of biological fluids belonging to patients with different pathologies adsorbs protein coronas with different compositions, giving rise to the concept of the personalized protein corona (PPC). Herein, we review recent advances on the topic of PPC, with a particular focus on their clinical significance.

Functional Mesoporous Silica Nanocomposites: Biomedical applications and Biosafety

The rise and development of nanotechnology has enabled the creation of a wide number of systems with new and advantageous features to treat cancer. However, in many cases, the lone application of these new nanotherapeutics has proven not to be enough to achieve acceptable therapeutic efficacies. Hence, to avoid these limitations, the scientific community has embarked on the development of single formulations capable of combining functionalities. Among all possible components, silica-either solid or mesoporous-has become of importance as connecting and coating material for these new-generation therapeutic nanodevices. In the present review, the most recent examples of fully inorganic silica-based functional composites are visited, paying particular attention to those with potential biomedical applicability. Additionally, some highlights will be given with respect to their possible biosafety issues based on their chemical composition.

Toxicological Evaluation of Luminescent Silica Nanoparticles as New Drug Nanocarriers in Different Cancer Cell Lines

Luminescent mesoporous silica nanoparticles, CdTeQDs@MNs@PEG1, SiQDs@Isoc@MNs and SiQDs@Isoc@MNs@PEG2, were successfully synthetized and characterized by SEM, TEM, XRD, N₂ nitrogen isotherms, ¹H NMR, IR, absorption, and emission spectroscopy. Cytotoxic evaluation of these nanoparticles was performed in relevant in vitro cell models, such as human hepatoma HepG2, human brain endothelial (hCMEC/D3), and human epithelial colorectal adenocarcinoma (Caco-2) cell lines. None of the tested nanoparticles showed significant cytotoxicity in any of the three performed assays (MTT/NR/ LDH) compared with the respective solvent and/or coating controls, excepting for CdTeQDs@MNs@PEG1 nanoparticles, where significant toxicity was noticed in hCMEC/D3 cells. The results presented reveal that SiQDs-based mesoporous silica nanoparticles are promising nanoplatforms for cancer treatment, with a pH-responsive drug release profile and the ability to load 80% of doxorubicin.

Self-Assembly of Mesoscale Artificial Clathrin Mimics

Fluidic control and sampling in complex environments is an important process in biotechnology, materials synthesis, and microfluidics. An elegant solution to this problem has evolved in nature through cellular endocytosis, where the dynamic recruitment, self-assembly, and spherical budding of clathrin proteins allows cells to sample their external environment. Yet despite the importance and utility of endocytosis, artificial systems which can replicate this dynamic behavior have not been developed. Guided by clathrin's unusual structure, we created simplified metallic microparticles that capture the three-legged shape, particle curvature, and interfacial attachment characteristics of clathrin. These artificial clathrin mimics successfully recreate biomimetic analogues of clathrin's recruitment, assembly, and budding, ultimately forming extended networks at fluid interfaces and invaginating immiscible phases into spheres under external fields. Particle curvature was discovered to be a critical structural motif, greatly limiting irreversible aggregation and inducing the legs' selective tip-to-tip attraction. This architecture provides a template for a class of active self-assembly units to drive structural and dimensional transformations of liquid-liquid interfaces and microscale fluidic sampling.

Photostability of the Oleic Acid-Encapsulated Water-Soluble Cd x Se y Zn1-x S1-y Gradient Core-Shell Quantum Dots

Composite systems where quantum dots (QDs) are combined with other nanomaterials (e.g., gold nanorods) in aqueous solutions have attracted broad attention-both for their potential in applications and for studies of fundamental processes. However, high-quality QDs are typically prepared in organic solvents, and the transfer of QDs to an aqueous phase is needed to create the desired QD composites. Photostability of the transferred QDs-both the steady-state and photo-induced dynamic properties-is essential for studying the processes in the composites and for their applications. We present a detailed study of the photostability of aqueous Cd _x Se _y Zn_1-x S_1-y gradient core-shell QDs obtained by various approaches using linker exchange and surfactant encapsulation. Beside the steady-state photoluminescence (PL) emission stability, we also study changes in the PL decay. From the variety of the studied samples, the water-soluble QDs encapsulated by a double layer of oleic acid show superior properties, that is, stable PL emission and PL decay under continuous light or pulsed-laser light irradiation. We demonstrate that the double-layer encapsulation of QDs can be used to create QDs-metal nanoparticle composites.

Uptake of silica covered Quantum Dots into living cells: Long term vitality and morphology study on hyaluronic acid biomaterials

Quantum Dots (QDs) are promising very bright and stable fluorescent probes for optical studies in the biological field but water solubility and possible metal bio-contamination need to be addressed. In this work, a simple silica-QD hybrid system is prepared and the uptake in bovine chondrocytes living cells without any functionalization of the external protective silica shield is demonstrated. Moreover, long term treated cells vitality (up to 14days) and the transfer of silica-QDs to the next cell generations are here reported. Confocal fluorescence microscopy was also used to determine the morphology of the so labelled cells and the relative silica-QDs distribution. Finally, we employ silica-QD stained chondrocytes to characterize, as proof of concept, hydrogels obtained from an amphiphilic derivative of hyaluronic acid (HA-EDA-C18) functionalized with different amounts of the RGD peptide.

Nanoparticles in practice for molecular-imaging applications: An overview

Nanoparticles (NPs) are playing a progressively more significant role in multimodal and multifunctional molecular imaging. The agents like Superparamagnetic iron oxide (SPIO), manganese oxide (MnO), gold NPs/nanorods and quantum dots (QDs) possess specific properties like paramagnetism, superparamagnetism, surface plasmon resonance (SPR) and photoluminescence respectively. These specific properties make them able for single/multi-modal and single/multi-functional molecular imaging. NPs generally have nanomolar or micromolar sensitivity range and can be detected via imaging instrumentation. The distinctive characteristics of these NPs make them suitable for imaging, therapy and delivery of drugs. Multifunctional nanoparticles (MNPs) can be produced through either modification of shell or surface or by attaching an affinity ligand to the nanoparticles. They are utilized for targeted imaging by magnetic resonance imaging (MRI), single photon emission computed tomography (SPECT), positron emission tomography (PET), computed tomography (CT), photo acoustic imaging (PAI), two photon or fluorescent imaging and ultra sound etc. Toxicity factor of NPs is also a very important concern and toxic effect should be eliminated. First generation NPs have been designed, developed and tested in living subjects and few of them are already in clinical use. In near future, molecular imaging will get advanced with multimodality and multifunctionality to detect diseases like cancer, neurodegenerative diseases, cardiac diseases, inflammation, stroke, atherosclerosis and many others in their early stages. In the current review, we discussed single/multifunctional nanoparticles along with molecular imaging modalities.

STATEMENT OF SIGNIFICANCE

The present article intends to reveal recent avenues for nanomaterials in multimodal and multifunctional molecular imaging through a review of pertinent literatures. The topic emphasises on the distinctive characteristics of nanomaterial which makes them, suitable for biomedical imaging, therapy and delivery of drugs. This review is more informative of indicative technologies which will be helpful in a way to plan, understand and lead the nanotechnology related work.

Quantum dot as probe for disease diagnosis and monitoring

Semiconductor quantum dots (QD) possess unique optical and electric properties like size-tunable light emission, narrow emission range, high brightness and photostability. Recent research advances have minimized the toxicity of QDs and they are successfully used in in vitro and in vivo imaging. Encapsulation of QDs into polymeric nanoparticles and linking them with targeting ligands enabled the detection of tumors and cancer cells in vivo. QD-antibody conjugates were successfully used in monitoring and diagnosis of HIV and myocardial infarction. Application of near infrared (NIR) QDs was found to minimize the absorption and scattering of light by native tissues thus rendering them suitable in deep tissue analysis. Aggregation and endosomal sequestration of QDs pose major challenges for the effective delivery of QDs to the cell cytosol. Toxicity minimization and effective delivery strategies may further increase their suitability for utilization in disease diagnosis. New synthesis of QDs may provide new types of bioconjugates of QDs to biomolecules, which leads to a variety of applications to many challenged research areas. QDs with narrow emission wavelength ranges are very suitable for monitoring multiple cellular targets simultaneously, and still remain the best known probes for imaging as an alternative to traditional fluorophores in disease diagnosis.

Core-shell designed scaffolds for drug delivery and tissue engineering

Scaffolds that secure and deliver therapeutic ingredients like signaling molecules and stem cells hold great promise for drug delivery and tissue engineering. Employing a core-shell design for scaffolds provides a promising solution. Some unique methods, such as co-concentric nozzle extrusion, microfluidics generation, and chemical confinement reactions, have been successful in producing core-shelled nano/microfibers and nano/microspheres. Signaling molecules and drugs, spatially allocated to the core and/or shell part, can be delivered in a controllable and sequential manner for optimal therapeutic effects. Stem cells can be loaded within the core part on-demand, safely protected from the environments, which ultimately affords ex vivo culture and in vivo tissue engineering. The encapsulated cells experience three-dimensional tissue-mimic microenvironments in which therapeutic molecules are secreted to the surrounding tissues through the semi-permeable shell. Tuning the material properties of the core and shell, changing the geometrical parameters, and shaping them into proper forms significantly influence the release behaviors of biomolecules and the fate of the cells. This topical issue highlights the immense usefulness of core-shell designs for the therapeutic actions of scaffolds in the delivery of signaling molecules and stem cells for tissue regeneration and disease treatment.

QD-Based FRET Probes at a Glance

The unique optoelectronic properties of quantum dots (QDs) give them significant advantages over traditional organic dyes, not only as fluorescent labels for bioimaging, but also as emissive sensing probes. QD sensors that function via manipulation of fluorescent resonance energy transfer (FRET) are of special interest due to the multiple response mechanisms that may be utilized, which in turn imparts enhanced flexibility in their design. They may also function as ratiometric, or "color-changing" probes. In this review, we describe the fundamentals of FRET and provide examples of QD-FRET sensors as grouped by their response mechanisms such as link cleavage and structural rearrangement. An overview of early works, recent advances, and various models of QD-FRET sensors for the measurement of pH and oxygen, as well as the presence of metal ions and proteins such as enzymes, are also provided.

Mesoporous persistent nanophosphors for in vivo optical bioimaging and drug-delivery

Based upon the ambitious idea that one single particle could serve multiple purposes at the same time, the combination and simultaneous use of imaging and therapeutics has lately arisen as one of the most promising prospects among nanotechnologies directed toward biomedical applications. Intended for both therapeutics and diagnostics in vivo, highly complex nanostructures were specifically designed to simultaneously act as optical imaging probes and delivery vehicles. Yet, such multifunctional photonic nanoplatforms usually exploit fluorescence phenomena which require constant excitation light through biological tissues and thus significantly reduce the detection sensitivity due to the autofluorescence from living animals. In order to overcome this critical issue, the present article introduces a novel multifunctional agent based on persistent luminescence mesoporous nanoparticles. Being composed of a hybrid chromium-doped zinc gallate core/mesoporous silica shell architecture, we show that this nanotechnology can be used as an efficient doxorubicin-delivery vehicle presenting a higher cytotoxicity toward U87MG cells than its unloaded counterpart in vitro. In addition, we demonstrate that a persistent luminescence signal from these doxorubicin-loaded mesoporous nanophosphors opens a new way to highly sensitive detection in vivo, giving access to the real-time biodistribution of the carrier without any autofluorescence from the animal tissues. This new persistent luminescence-based hybrid nanotechnology can be easily applied to the delivery of any therapeutic agent, thus constituting a versatile and sensitive optical nanotool dedicated to both therapeutic and diagnostic applications in vivo.

Biocompatible and highly luminescent near-infrared CuInS₂/ZnS quantum dots embedded silica beads for cancer cell imaging

Bright and stable CuInS2/ZnS@SiO2 nanoparticles with near-infrared (NIR) emission were competently prepared by incorporating the as-prepared hydrophobic CuInS2/ZnS quantum dots (QDs) directly into lipophilic silane micelles and subsequently an exterior silica shell was formed. The obtained CuInS2/ZnS@SiO2 nanoparticles homogeneously comprised both single-core and multicore remarkable CuInS2/ZnS QDs, while the silica shell thickness could be controlled to within 5-10 nm and their overall size was 17-25 nm. Also, the functionalized CuInS2/ZnS QDs encapsulated in the silica spheres, expedited their bioconjugation with holo-Transferrin (Tf) for further cancer cell imaging. The CuInS2/ZnS@SiO2 nanoparticles not only showed a dominant NIR band-edge luminescence at 650-720 nm with a quantum yield (QY) between 30 and 50%, without a recognized photoluminescence (PL) red shift, but also exhibited excellent PL and colloidal stability in aqueous media. Impressively, the cytotoxicity studies revealed minor suppression on cell viability under both CuInS2/ZnS@SiO2 and CuInS2/ZnS@SiO2@Tf concentrations up to 1 mg/mL. The application in live-cell imaging revealed that the potential of CuInS2/ZnS QDs as biocompatible, robust, cadmium-free, and brilliant NIR emitters is considered promising for fluorescent labels.

Multifunctional gadolinium-labeled silica-coated core/shell quantum dots for magnetic resonance and fluorescence imaging of cancer cells

Multifunctional gadolinium-labeled silica-coated core/shell nanoparticles with high relaxivity and photoluminescence were synthesized for dual-modal contrast.

The protective effect of the mesoporous host on the photo oxidation of fluorescent guests: a UV-Vis spectroscopy study

The inclusion of fluorescent molecules within the pores of an inorganic host system ensures an outstanding improvement of stability against photo oxidation under different experimental conditions.

A "wrap-and-wrest" mechanism of fluorescence quenching of CdSe/ZnS quantum dots by surfactant molecules

We identified a mechanism of fluorescence quenching of CdSe/ZnS quantum dots (QDs) coated with two organic layers, octadecylamine and an amphiphilic polymer containing COOH groups, by nonionic polyoxyethylene-based (C12En) surfactants. The surfactant molecules by themselves do not affect the fluorescence of the QDs. For the quenching to occur, "wrapping" of the QDs by a bilayer of the surfactant molecules is necessary. The formation of the bilayer causes an irreversible detachment ("wresting") of the ligand molecules, accompanied by the creation of quenching sites on the QD surface. Due to its two-stage nature, we refer to the quenching mechanism as the "wrap-and-wrest" mechanism. The adsorption of the surfactant on the QD surface is a relatively slow process, occurring within minutes or hours. Such long quenching times allowed monitoring surfactant adsorption progress in real time. The fluorescence signal decays exponentially, and the decay time is inversely proportional to the surfactant concentration in solution.

Quantum dots as a platform for nanoparticle drug delivery vehicle design

Nanoparticle-based drug delivery (NDD) has emerged as a promising approach to improving upon the efficacy of existing drugs and enabling the development of new therapies. Proof-of-concept studies have demonstrated the potential for NDD systems to simultaneously achieve reduced drug toxicity, improved bio-availability, increased circulation times, controlled drug release, and targeting. However, clinical translation of NDD vehicles with the goal of treating particularly challenging diseases, such as cancer, will require a thorough understanding of how nanoparticle properties influence their fate in biological systems, especially in vivo. Consequently, a model system for systematic evaluation of all stages of NDD with high sensitivity, high resolution, and low cost is highly desirable. In theory, this system should maintain the properties and behavior of the original NDD vehicle, while providing mechanisms for monitoring intracellular and systemic nanocarrier distribution, degradation, drug release, and clearance. For such a model system, quantum dots (QDots) offer great potential. QDots feature small size and versatile surface chemistry, allowing their incorporation within virtually any NDD vehicle with minimal effect on overall characteristics, and offer superb optical properties for real-time monitoring of NDD vehicle transport and drug release at both cellular and systemic levels. Though the direct use of QDots for drug delivery remains questionable due to their potential long-term toxicity, the QDot core can be easily replaced with other organic drug carriers or more biocompatible inorganic contrast agents (such as gold and magnetic nanoparticles) by their similar size and surface properties, facilitating translation of well characterized NDD vehicles to the clinic, maintaining NDD imaging capabilities, and potentially providing additional therapeutic functionalities such as photothermal therapy and magneto-transfection. In this review we outline unique features that make QDots an ideal platform for nanocarrier design and discuss how this model has been applied to study NDD vehicle behavior for diverse drug delivery applications.

Uniform mesoporous silica coated iron oxide nanoparticles as a highly efficient, nontoxic MRI T(2) contrast agent with tunable proton relaxivities

Monodisperse mesoporous silica (mSiO(2) ) coated superparamagnetic iron oxide (Fe(3) O(4) @mSiO(2) ) nanoparticles (NPs) have been developed as a potential magnetic resonance imaging (MRI) T(2) contrast agent. To evaluate the effect of surface coating on MRI contrast efficiency, we examined the proton relaxivities of Fe(3) O(4) @mSiO(2) NPs with different coating thicknesses. It was found that the mSiO(2) coating has a significant impact on the efficiency of Fe(3) O(4) NPs for MRI contrast enhancement. The efficiency increases with the thickness of mSiO(2) coating and is much higher than that of the commercial contrast agents. Nuclear magnetic resonance (NMR) relaxometry of Fe(3) O(4) @mSiO(2) further revealed that mSiO(2) coating is partially permeable to water molecules and therefore induces the decrease of longitudinal relaxivity, r(1) . Biocompatibility evaluation of various sized (ca. 35-95 nm) Fe(3) O(4) @mSiO(2) NPs was tested on OC-k3 cells and the result showed that these particles have no negative impact on cell viability. The enhanced MRI efficiency of Fe(3) O(4) @mSiO(2) highlights these core-shell particles as highly efficient T(2) contrast agents with high biocompatibility.

Synthesis and application of luminescent single CdS quantum dot encapsulated silica nanoparticles directed for precision optical bioimaging

This paper presents the synthesis of aqueous cadmium sulfide (CdS) quantum dots (QDs) and silica-encapsulated CdS QDs by reverse microemulsion method and utilized as targeted bio-optical probes. We report the role of CdS as an efficient cell tag with fluorescence on par with previously documented cadmium telluride and cadmium selenide QDs, which have been considered to impart high levels of toxicity. In this study, the toxicity of bare QDs was efficiently quenched by encapsulating them in a biocompatible coat of silica. The toxicity profile and uptake of bare CdS QDs and silica-coated QDs, along with the CD31-labeled, silica-coated CdS QDs on human umbilical vein endothelial cells and glioma cells, were investigated. The effect of size, along with the time-dependent cellular uptake of the nanomaterials, has also been emphasized. Enhanced, high-specificity imaging toward endothelial cell lines in comparison with glioma cells was achieved with CD31 antibody-conjugated nanoparticles. The silica-coated nanomaterials exhibited excellent biocompatibility and greater photostability inside live cells, in addition to possessing an extended shelf life. In vivo biocompatibility and localization study of silica-coated CdS QDs in medaka fish embryos, following direct nanoparticle exposure for 24 hours, authenticated the nanomaterials’ high potential for in vivo imaging, augmented with superior biocompatibility. As expected, CdS QD-treated embryos showed 100% mortality, whereas the silica-coated QD-treated embryos stayed viable and healthy throughout and after the experiments, devoid of any deformities. We provide highly cogent and convincing evidence for such silica-coated QDs as a model nanoparticle in practice, to achieve in vitro and in vivo precision targeted imaging.

Mesoporous carbon@silicon-silica nanotheranostics for synchronous delivery of insoluble drugs and luminescence imaging

A hierarchical theranostic nanostructure with carbon and Si nanocrystals respectively encapsulated in the mesopores and within the framework of mesoporous silica nanoparticles (CS-MSNs) was constructed by a bottom-up self-assembly strategy combining an in situ one-step carbonization/crystallization approach. CS-MSNs exhibited narrow size distribution, high payload of insoluble drugs and unique NIR-to-Vis luminescence imaging feature. The bio-conjugated CS-MSNs with a PEGylated phospholipid compound and hyaluronic acid showed excellent dispersivity and could specifically target cancer cells overexpressing CD44, deliver insoluble drugs into these cells and consequently kill them effectively, and also fluorescently image them simultaneously in a unique and attractive NIR-to-Vis luminescence imaging fashion, providing a promising opportunity for cancer theranostics.

Controlled synthesis of uniform and monodisperse upconversion core/mesoporous silica shell nanocomposites for bimodal imaging

Here we report the design and controlled synthesis of monodisperse and precisely size-controllable UCNP@mSiO(2) nanocomposites smaller than 50 nm by directly coating a mesoporous silica shell (mSiO(2)) on upconversion nanocrystals NaYF(4):Tm/Yb/Gd (UCNPs), which can be used as near-infrared fluorescence and magnetic resonance imaging (MRI) agents and a platform for drug delivery as well. Some key steps such as transferring hydrophobic UCNPs to the water phase by using cetyltrimethylammonium bromide (CTAB), removal of the excess amount of CTAB, and temperature-controlled ultrasonication treatment should be adopted and carefully monitored to obtain uniform upconversion core/mesoporous silica shell nanocomposites. The excellent performance of the core-shell-structured nanocomposite in near-infrared fluorescence and magnetic resonance imaging was also demonstrated.

Synthesis of In2O3@SiO2 core-shell nanoparticles with enhanced deeper energy level emissions of In2O3

In(2)O(3)@SiO(2) core-shell nanoparticles were prepared using an organic solution synthesis approach and reverse-microemulsion technique. In order to explore the availability of various silica encapsulations, a partial phase diagram for this ternary system consisting of hexane/cyclohexane (1:29 wt), surfactant (polyoxyethylene(5)nonylphenyl ether, i.e., Igepal CO-520), and aqueous solution containing ammonium hydroxide was also established. It is realized that the shell-thickness can be tuned by several parameters such as the concentration of In(2)O(3) nanocrystal suspension and the dose of the Si-precursor, tetraethyl orthosilicate. It was observed that the deeper energy level emissions of In(2)O(3) were apparently enhanced when In(2)O(3) was confined by the silica-shell in such core-shell nanoparticles. However, this enhancement could be degraded by increasing the shell-thickness.

Bioceramics: from bone regeneration to cancer nanomedicine

Research on biomaterials has been growing in the last few years due to the clinical needs in organs and tissues replacement and regeneration. In addition, cancer nanomedicine has recently appeared as an effective means to combine nanotechnology developments towards a clinical application. Ceramic materials are suitable candidates to be used in the manufacturing of bone-like scaffolds. Bioceramic materials may also be designed to deliver biologically active substances aimed at repairing, maintaining, restoring or improving the function of organs and tissues in the organism. Several materials such as calcium phosphates, glasses and glass ceramics able to load and subsequently release in a controlled fashion drugs, hormones, growth factors, peptides or nucleic acids have been developed. In particular, to prevent post surgical infections bioceramics may be surface modified and loaded with certain antibiotics, thus preventing the formation of bacterial biofilms. Remarkably, mesoporous bioactive glasses have shown excellent characteristics as drug carrying bone regeneration materials. These bioceramics are not only osteoconductive and osteoproductive, but also osteoinductive, and have therefore been proposed as ideal components for the fabrication of scaffolds for bone tissue engineering. A recent promising development of bioceramic materials is related to the design of magnetic mediators against tumors. Magnetic composites are suitable thermoseeds for cancer treatment by hyperthermia. Moreover, magnetic nanomaterials offer a wide range of possibilities for diagnosis and therapy. These nanoparticles may be conjugated with therapeutic agents and heat the surrounding tissue under the action of alternating magnetic fields, enabling hyperthermia of cancer as an effective adjunct to chemotherapy regimens.

Multifunctional silica nanoparticles for targeted delivery of hydrophobic imaging and therapeutic agents

This article reports the development of a multifunctional silica nanoparticle system for targeted delivery of hydrophobic imaging and therapeutic agents. Normally, silica nanoparticles have been widely used to deliver hydrophilic drugs such as doxorubicin while difficult to carry hydrophobic drugs. A strategy for loading hydrophobic drugs onto silica nanoparticles via covalent attachment was developed in this study as a universal strategy to solve this problem. Docetaxel, one of the most potent therapeutics for cancer treatment is selected as a model hydrophobic drug and quantum dots (QDs) are used as a model imaging agent. Such a multifunctional delivery system possesses high drug loading capacity, controlled drug release behavior and stable drug reservation. A mixed layer of polyethylene glycol conjugated phospholipids is formed on the nanoparticle surface to further enhance the biocompatibility and cell fusion capability of the delivery system. Folic acid as ligand is then conjugated onto the surface layer for targeting. Such a multifunctional system for targeting, imaging and therapy is characterized and evaluated in vitro. Fluorescent confocal microscopy is used to monitor the cellular uptake by specific cancer cells. Cytotoxicity studies are conducted by using MTT assay.