Biomechanics of atherosclerotic coronary plaque: site, stability and in vivo elasticity modeling

Oral Administration of Branched-Chain Amino Acids Attenuates Atherosclerosis by Inhibiting the Inflammatory Response and Regulating the Gut Microbiota in ApoE-Deficient Mice

Atherosclerosis (AS) is a chronic inflammatory disease that serves as a common pathogenic underpinning for various cardiovascular diseases. Although high circulating branched-chain amino acid (BCAA) levels may represent a risk factor for AS, it is unclear whether dietary BCAA supplementation causes elevated levels of circulating BCAAs and hence influences AS, and the related mechanisms are not well understood. Here, ApoE-deficient mice (ApoE-/-) were fed a diet supplemented with or without BCAAs to investigate the effects of BCAAs on AS and determine potential related mechanisms. In this study, compared with the high-fat diet (HFD), high-fat diet supplemented with BCAAs (HFB) reduced the atherosclerotic lesion area and caused a significant decrease in serum cholesterol (TC) and low-density lipoprotein cholesterol (LDL-C) levels. BCAA supplementation suppressed the systemic inflammatory response by reducing macrophage infiltration; lowering serum levels of inflammatory factors, including monocyte chemoattractant protein-1 (MCP-1), tumor necrosis factor-α (TNF-α), interleukin-1β (IL-1β) and interleukin-6 (IL-6); and suppressing inflammatory related signaling pathways. Furthermore, BCAA supplementation altered the gut bacterial beta diversity and composition, especially reducing harmful bacteria and increasing probiotic bacteria, along with increasing bile acid (BA) excretion. In addition, the levels of total BAs, primary BAs, 12α-hydroxylated bile acids (12α-OH BAs) and non-12α-hydroxylated bile acids (non-12α-OH BAs) in cecal and colonic contents were increased in the HFB group of mice compared with the HFD group. Overall, these data indicate that dietary BCAA supplementation can attenuate atherosclerosis induced by HFD in ApoE-/- mice through improved dyslipidemia and inflammation, mechanisms involving the intestinal microbiota, and promotion of BA excretion.

The Potential Mediating Effects of Inflammation on the Association Between Type D Personality and Coronary Plaque Vulnerability in Patients With Coronary Artery Disease: An Optical Coherence Tomography Study

OBJECTIVE

Type D personality involves the interaction between negative affectivity with social inhibition and has been associated with an increased risk of coronary artery disease (CAD) progression and coronary plaque vulnerability. However, the underlying mechanisms in the relationship between type D personality and coronary plaque vulnerability remain indeterminate. The present study examined the potential mediating effects of inflammation biomarkers on the association between type D personality and coronary plaque vulnerability in patients with CAD.

METHODS

A total of 347 patients (mean [standard deviation] age = 56.6 [11.2] years; 29.3% women) with CAD who had culprit coronary plaques were examined for type D personality. The inflammation biomarkers (high-sensitivity C-reactive protein, interleukin 6 [IL-6], and tumor necrosis factor α [TNF-α]) were evaluated. Each individual inflammation biomarker was standardized using z scores to calculate inflammation standardized sumscores. Plaque vulnerability of culprit lesions was measured in vivo using optical coherence tomography.

RESULTS

The presence of type D personality (38%) was associated with TNF-α, IL-6, and inflammation standardized sumscores (t = 2.74, Cohen d = 0.32, p = .006; t = 4.03, Cohen d = 0.44, p ≤. 001; t = 4.16, Cohen d = 0.11, p = .001, respectively). In addition, the standardized inflammation sumscore was a mediator of the relationship between type D personality and lipid-rich plaques (effect sizes = 0.12, 95% confidence interval = 0.007-0.286, p = .064) and plaque rupture vulnerability (effect sizes = 0.16, 95% confidence interval = 0.043-0.365, p = .024). Analysis of continuous type D scores revealed that TNF-α, IL-6, and inflammation standardized sumscores also mediate the relationship between the primary effect of negative affectivity and plaque vulnerability.

CONCLUSIONS

Inflammation activation is a potential mediator of the association between type D personality and plaque vulnerability. The negative affectivity component of type D personality might be particularly relevant to the inflammatory aspects of plaque vulnerability.

Patient-Specific Inverse Modeling of In Vivo Cardiovascular Mechanics with Medical Image-Derived Kinematics as Input Data: Concepts, Methods, and Applications

Inverse modeling approaches in cardiovascular medicine are a collection of methodologies that can provide non-invasive patient-specific estimations of tissue properties, mechanical loads, and other mechanics-based risk factors using medical imaging as inputs. Its incorporation into clinical practice has the potential to improve diagnosis and treatment planning with low associated risks and costs. These methods have become available for medical applications mainly due to the continuing development of image-based kinematic techniques, the maturity of the associated theories describing cardiovascular function, and recent progress in computer science, modeling, and simulation engineering. Inverse method applications are multidisciplinary, requiring tailored solutions to the available clinical data, pathology of interest, and available computational resources. Herein, we review biomechanical modeling and simulation principles, methods of solving inverse problems, and techniques for image-based kinematic analysis. In the final section, the major advances in inverse modeling of human cardiovascular mechanics since its early development in the early 2000s are reviewed with emphasis on method-specific descriptions, results, and conclusions. We draw selected studies on healthy and diseased hearts, aortas, and pulmonary arteries achieved through the incorporation of tissue mechanics, hemodynamics, and fluid-structure interaction methods paired with patient-specific data acquired with medical imaging in inverse modeling approaches.

Coexistence of calcified- and lipid-containing plaque components and their association with incidental rupture points in acute coronary syndrome-causing culprit lesions: results from the prospective OPTICO-ACS study

AIMS

Rupture of the fibrous cap (RFC) represents the main pathophysiological mechanism causing acute coronary syndromes (ACS). Destabilization due to plaque biomechanics is considered to be importantly involved, exact mechanisms triggering plaque ruptures are, however, unknown. This study aims at characterizing the relation between plaque components and rupture points at ACS-causing culprit lesions in a large cohort of ACS-patients assessed by high-resolution intracoronary imaging.

METHODS AND RESULTS

Within the prospective, multicentric OPTICO-ACS study program, the ACS-causing culprit plaques of 282 consecutive patients were investigated following a standardized optical coherence tomography (OCT) imaging protocol. Each pullback was assessed on a frame-by-frame basis for the presence of lipid components (LC), calcium components (CC), and coexistence of both LC and CC (LCC) by two independent OCT-core labs. Of the 282 ACS-patients, 204 patients (72.3%) presented with ACS caused by culprit lesions with rupture of the fibrous cap (RFC-ACS) and 27.7% patients had ACS caused by culprit lesions with intact fibrous cap (IFC-ACS). When comparing RFC-ACS to IFC-ACS, a preferential occurrence of all three plaque components (LC, CC, and LCC) in RFC-ACS became apparent (P < 0.001). Within ruptured culprit lesions, the zone straight at the rupture point [extended rupture zone (RZ)] was characterized by similar (24.7% vs. 24.0%; P = ns) calcium content when compared with the proximal and distal border of the culprit lesion [border zone (BZ)]. The RZ displayed a significantly higher amount of both, LC (100% vs. 69.8%; P < 0.001) and LCC (22.7% vs. 6.8%; P < 0.001), when compared with the BZ. The relative component increase towards the RZ was particularly evident for LCC (+233.8%), while LC showed only a modest increase (+43.3%).

CONCLUSIONS

Calcified- and lipid-containing components characterize ruptured fibrous cap ACS-causing culprit lesions. Their coexistence is accelerated directly at the ruptured point, suggesting a pathophysiological contribution in the development of RFC-ACS.

Optical Coherence Tomography-Derived Changes in Plaque Structural Stress Over the Cardiac Cycle: A New Method for Plaque Biomechanical Assessment

Introduction: Cyclic plaque structural stress has been hypothesized as a mechanism for plaque fatigue and eventually plaque rupture. A novel approach to derive cyclic plaque stress in vivo from optical coherence tomography (OCT) is hereby developed. Materials and Methods: All intermediate lesions from a previous OCT study were enrolled. OCT cross-sections at representative positions within each lesion were selected for plaque stress analysis. Detailed plaque morphology, including plaque composition, lumen and internal elastic lamina contours, were automatically delineated. OCT-derived vessel and plaque morphology were included in a 2-dimensional finite element analysis, loaded with patient-specific intracoronary pressure tracing data, to calculate the changes in plaque structural stress (ΔPSS) on vessel wall over the cardiac cycle. Results: A total of 50 lesions from 41 vessels were analyzed. A significant ΔPSS gradient was observed across the plaque, being maximal at the proximal shoulder (45.7 [32.3, 78.6] kPa), intermediate at minimal lumen area (MLA) (39.0 [30.8, 69.1] kPa) and minimal at the distal shoulder (35.1 [28.2, 72.3] kPa; p = 0.046). The presence of lipidic plaques were observed in 82% of the diseased segments. Larger relative lumen deformation and ΔPSS were observed in diseased segments, compared with normal segments (percent diameter change: 8.2 ± 4.2% vs. 6.3 ± 2.3%, p = 0.04; ΔPSS: 59.3 ± 48.2 kPa vs. 27.5 ± 8.2 kPa, p < 0.001). ΔPSS was positively correlated with plaque burden (r = 0.37, p < 0.001) and negatively correlated with fibrous cap thickness (r = -0.25, p = 0.004). Conclusions: ΔPSS provides a feasible method for assessing plaque biomechanics in vivo from OCT images, consistent with previous biomechanical and clinical studies based on different methodologies. Larger ΔPSS at proximal shoulder and MLA indicates the critical sites for future biomechanical assessment.

Translation of Simultaneous Vessel Wall Motion and Vectorial Blood Flow Imaging in Healthy and Diseased Carotids to the Clinic: A Pilot Study

This study aims to investigate the clinical feasibility of simultaneous extraction of vessel wall motion and vectorial blood flow at high frame rates for both extraction of clinical markers and visual inspection. If available in the clinic, such a technique would allow a better estimation of plaque vulnerability and improved evaluation of the overall arterial health of patients. In this study, both healthy volunteers and patients were recruited and scanned using a planewave acquisition scheme that provided a data set of 43 carotid recordings in total. The vessel wall motion was extracted based on the complex autocorrelation of the signals received, while the vector flow was extracted using the transverse oscillation technique. Wall motion and vector flow were extracted at high frame rates, which allowed for a visual appreciation of tissue movement and blood flow simultaneously. Several clinical markers were extracted, and visual inspections of the wall motion and flow were conducted. From all the potential markers, young healthy volunteers had smaller artery diameter (7.72 mm) compared with diseased patients (9.56 mm) ( p -value ≤ 0.001), 66% of diseased patients had backflow compared with less than 10% for the other patients ( p -value ≤ 0.05), a carotid with a pulse wave velocity extracted from the wall velocity greater than 7 m/s was always a diseased vessel, and the peak wall shear rate decreased as the risk increases. Based on both the pathological markers and the visual inspection of tissue motion and vector flow, we conclude that the clinical feasibility of this approach is demonstrated. Larger and more disease-specific studies using such an approach will lead to better understanding and evaluation of vessels, which can translate to future use in the clinic.

The Relation between Atherosclerosis Plaque Composition and Plaque Rupture

Background:

Intima, media, and adventitia are three layers of arteries. They have different structures and different mechanical properties. Damage to intima layer of arteries leads to an inflammatory response, which is usually the reason for atherosclerosis plaque formation. Atherosclerosis plaques mainly consist of smooth muscle cells and calcium. However, plaque geometry and mechanical properties change during time. Blood flow is the source of biomechanical stress to the plaques. Maximum stress that atherosclerosis plaque can burden before its rupture depends on fibrous cap thickness, lipid core, calcification, and artery stenosis. When atherosclerotic plaque ruptures, the blood would be in contact with coagulation factors. That is why plaque rupture is one of the main causes of fatality.

Method:

In this article, the coronary artery was modeled by ANSYS. First, fibrous cap thickness was increased from 40 μm to 250 μm by keeping other parameters constant. Then, the lipid pool percentage was incremented from 10% to 90% by keeping other parameters unchanged. Furthermore, for investigating the influence of calcium in plaque vulnerability, calcium was modeled in both agglomerated and microcalcium form.

Results:

It is proved that atherosclerosis plaque stress decreases exponentially as cap thickness increases. Larger lipid pool leads to more vulnerable plaques. In addition, the analysis showed maximum plaque stress usually increases in calcified plaque as compared with noncalcified plaque.

Conclusion:

The plaque stress is dependent on whether calcium is agglomerated near the lumen or far from it. However, in both cases, the deposition of more calcium in calcified plaque reduces maximum plaque stress.

Cylindrical Transducer for Intravascular ARFI Imaging: Design and Feasibility

Intravascular acoustic radiation force impulse (IV-ARFI) imaging has the potential to identify vulnerable atherosclerotic plaques and improve clinical treatment decisions and outcomes for patients with coronary heart disease. Our long-term goal is to develop a thin, flexible catheter probe that does not require mechanical rotation to achieve high-resolution IV-ARFI imaging. In this work, we propose a novel cylindrical transducer array design for IV-ARFI imaging and investigate the feasibility of this approach. We present the construction of a 2.2-mm-long, 4.6-Fr cylindrical prototype transducer to demonstrate generating large ARFI displacements from a small toroidal beam, and we also present simulations of the proposed IV-ARFI cylindrical array design using Field II and a cylindrical finite-element model of vascular tissues and soft plaques. The prototype transducer was found to generate peak radial displacements of over [Formula: see text] in soft gelatin phantoms, and simulations demonstrate the ability of the array design to obtain ARFI images and distinguish soft plaque targets from surrounding, stiffer vessel wall tissue. These results suggest that high-resolution IV-ARFI imaging is possible using a cylindrical transducer array.

Three dimensional numerical analysis of hemodynamic of stenosed artery considering realistic outlet boundary conditions

BACKGROUND AND OBJECTIVE

Mortality rate increases globally among which one third is due to diseased blood vessels. Due to late diagnoses of the disease in vessels (severe stenoses), qualitative and rapid assessment becomes difficult. Earlier assessment of stenoses can lead to formulation of effective treatment protocol. It is often found that proliferation of secondary stenoses at downstream of a stenosed vessel depends on the degree of severity of primary stenoses. Numerical investigation of flow dynamics of blood in such condition helps in prediction of distributed field of secondarystenoses. This investigation also requires consideration of rigorous boundary conditions at inlet and outlet of defined flow domain.

METHODS

Patient-specific geometry of aortic arch with stenoses in descending aorta was considered for numerical estimation of biofluid dynamics. Boundary conditionsat inlet and outlet were extracted from time-resolved pulsed Doppler Ultrasound imaging at appropriate sections of the vessel. Womersley inlet flux was considered. Flow parameters like wall shear stress, oscillatory shear index, etc. were evaluated at upper and lower aortic arch of the vessel at different combinations of boundary conditions at inlet and four outlets respectively.

RESULTS

Effect of outlet boundary conditions were acknowledged for the progression of secondary stenoses. Severity of primary stenoses was found influencing the progression of secondary stenoses. It was found that the outlets Left Subclavian Artery and Left Common Carotid Artery greatly influence the flow dynamic structure within the stenosed aortic arch. Simultaneously, lower wall of aortic-arch had shown more affinity for secondary stenoses progression.

CONCLUSION

Aortic arch is a vital anatomical region of circulatory system which is vulnerable to progression of secondary stenoses in presence of primary stenoses in ascending or descending aorta. It also drives the author to speculate the influence of anurysm in descending aorta on this landmark of aortic arch.

Simultaneous evaluation of plaque stability and ischemic potential of coronary lesions in a fluid-structure interaction analysis

The measurement of fractional flow reserve (FFR) and superficial wall stress (SWS) identifies inducible myocardial ischemia and plaque vulnerability, respectively. A simultaneous evaluation of both FFR and SWS is still lacking, while it may have a major impact on therapy. A new computational model of one-way fluid-structure interaction (FSI) was implemented and used to perform a total of 54 analyses in virtual coronary lesion models, based on plaque compositions, arterial remodeling patterns, and stenosis morphologies under physiological conditions. Due to a greater lumen dilation and more induced strain, FFR in the lipid-rich lesions (0.81 ± 0.15) was higher than that in fibrous lesions (0.79 ± 0.16, P = 0.001) and calcified lesions (0.79 ± 0.16, P = 0.001). Four types of lesions were further defined, based on the combination of cutoff values for FFR (0.80) and maximum relative SWS (30 kPa): The level of risk increased from (1) plaques with mild-to-moderate stenosis but negative remodeling for lipid-rich (Type A: non-ischemic, stable) to (2) lipid-rich plaques with mild-to-moderate stenosis and without-to-positive remodeling (Type B: non-ischemic, unstable) or plaques with severe stenosis but negative remodeling for lipid-rich (Type C: ischemic, stable) to (3) lipid-rich plaques with severe stenosis and without-to-positive remodeling (Type D: ischemic, unstable). The analysis of FSI to simultaneously evaluate inducible myocardial ischemia and plaque stability may be useful to identify coronary lesions at a high risk and to ultimately optimize treatment. Further research is warranted to assess whether a more aggressive treatment may improve the prognosis of patients with non-ischemic, intermediate, and unstable lesions.

Intraluminal Ultrasonic Palpation Imaging Technique Revisited for Anisotropic Characterization of Healthy and Atherosclerotic Coronary Arteries: A Feasibility Study

Accurate mechanical characterization of coronary atherosclerotic lesions remains essential for the in vivo detection of vulnerable plaques. Using intravascular ultrasound strain measurements and based on the mechanical response of a circular and concentric vascular model, E. I. Céspedes, C. L. de Korte and A. F. van der Steen developed an elasticity-palpography technique in 2000 to estimate the apparent stress-strain modulus palpogram of the thick subendoluminal arterial wall layer. More recently, this approach was improved by our group to consider the real anatomic shape of the vulnerable plaque. Even though these two studies highlighted original and promising approaches for improving the detection of vulnerable plaques, they did not overcome a main limitation related to the anisotropic mechanical behavior of the vascular tissue. The present study was therefore designed to extend these previous approaches by considering the orthotropic mechanical properties of the arterial wall and lesion constituents. Based on the continuum mechanics theory prescribing the strain field, an elastic anisotropy index was defined. This new anisotropic elasticity-palpography technique was successfully applied to characterize ten coronary plaque and one healthy vessel geometries of patients imaged in vivo with intravascular ultrasound. The results revealed that the anisotropy index-palpograms were estimated with a good accuracy (with a mean relative error of 26.8 ± 48.8%) compared with ground true solutions.

A Parasitic Insensitive Catheter-Based Capacitive Force Sensor for Cardiovascular Diagnosis

This paper presents a catheter-based capacitive force sensor interface for cardiovascular diagnosis. The force sensor is implemented on a flexible printed circuit board (FPCB) substrate with a force-sensitive polydimethylsiloxane (PDMS), and a force-induced change in a capacitance of the sensor is measured by a precision capacitive sensor interface. To recover the performance degradation caused by the large parasitic capacitance ${\rm C}_{\rm P}$ of a long catheter, we present a parasitic insensitive analog front-end (AFE) with active ${\rm C}_{\rm P}$ cancellation, which employs a charge amplifier and a negative capacitor at the virtual ground of the charge amplifier. The prototype sensor was measured with a force loader in whole blood. The proposed AFE successfully cancels ${\rm C}_{\rm P}$ of 348 pF in a 0.9-m-long sensor and measurement results show the SNR of 53.8 dB and the capacitance resolution of 16 aF, a 19.6 dB improvement by canceling nonideal effect of ${\rm C}_{\rm P}$ . This corresponds to a force resolution of 2.22 gf, which is 9.29 $\times$ reduction compared to the work without the ${\rm C}_{\rm P}$ cancellation. The proposed sensor interface is insensitive to ${\rm C}_{\rm P}$ from hundreds to 1-nF level, and the force-dependent stiffness of two different tissues has been successfully distinguished with an ex-vivo experiment. The proposed sensor interface enables the integration of capacitive force sensors in a smart catheter.

Type D personality and coronary atherosclerotic plaque vulnerability: The potential mediating effect of health behavior

OBJECTIVE

The association between type D personality and coronary plaque vulnerability has been suggested. The objective of the study was to evaluate the potential mediating effects of health behavior on the association between type D personality and plaque vulnerability in coronary artery disease (CAD) patients.

METHODS

A total of 319 CAD patients were assessed for type D personality and health behavior via self-administered questionnaires. The plaque vulnerability, evaluated according to characteristics, accompaniment, and outcomes of plaque, was assessed by optical coherence tomography.

RESULTS

Regression analysis showed that type D personality was independently associated with lipid plaque (odds ratio [OR] = 2.387, p = 0.001), thin cap fibroatheroma (TCFA) (OR = 2.366, p = 0.001), rupture (OR = 2.153, p = 0.002), and lipid arc (β = -0.291, p < 0.001). Mediation analyses showed that aspects of health behavior were significant mediators of the relationship between type D personality and plaque vulnerability. Psychological stress mediated the relationship between type D and lipid plaque (p = 0.030), TCFA (p = 0.034), and rupture (p = 0.013). Living habits significantly mediated the relationship between type D and lipid plaque (p = 0.028), TCFA (p = 0.036), but not rupture (p = 0.066). Participating in activities was not a significant mediator of the relationship between type D personality and lipid plaque (p = 0.115), TCFA (p = 0.115), or rupture (p = 0.077).

CONCLUSIONS

Health behaviors (psychological stress and living habits) may be mediators of the association between type D personality and plaque vulnerability.

Development of an intravascular ultrasound elastography based on a dual-element transducer

The ability to measure the elastic properties of plaques and vessels would be useful in clinical diagnoses, particularly for detecting a vulnerable plaque. This study demonstrates the feasibility of the combination of intravascular ultrasound (IVUS) and acoustic radiation force elasticity imaging for detecting the distribution of stiffness within atherosclerotic arteries ex vivo. A dual-frequency IVUS transducer with two elements was used to induce the propagation of the shear wave (by the 8.5 MHz pushing element) which could be simultaneously monitored by the 31 MHz imaging element. The wave-amplitude image and the wave-velocity image were reconstructed by measuring the peak displacement and wave velocity of shear wave propagation, respectively. System performance was verified using gelatin phantoms. The phantom results demonstrate that the stiffness differences of shear modulus of 1.6 kPa can be distinguished through the wave-amplitude and wave-velocity images. The stiffness distributions of the atherosclerotic aorta from a rabbit were obtained, for which the values of peak displacement and the shear wave velocity were 3.7 ± 1.2 µm and 0.38 ± 0.19 m s^-1 for the lipid-rich plaques, and 1.0 ± 0.2 µm and 3.45 ± 0.45 m s^-1 for the arterial walls, respectively. These results indicate that IVUS elasticity imaging can be used to distinguish the elastic properties of plaques and vessels.

Review. Automatic Segmentation Techniques of the Coronary Artery Using CT Images in Acute Coronary Syndromes

Coronary artery disease represents one of the leading reasons of death worldwide, and acute coronary syndromes are their most devastating consequences. It is extremely important to identify the patients at risk for developing an acute myocardial infarction, and this goal can be achieved using noninvasive imaging techniques. Coronary computed tomography angiography (CCTA) is currently one of the most reliable methods used for assessing the coronary arteries; however, its use in emergency settings is sometimes limited due to time constraints. This paper presents the main characteristics of plaque vulnerability, the role of CCTA in the assessment of vulnerable plaques, and automatic segmentation techniques of the coronary artery tree based on CT angiography images. A detailed inventory of existing methods is given, representing the state-of-the-art of computational methods applied in vascular system segmentation, focusing on the current applications in acute coronary syndromes.

Endothelial cell alignment as a result of anisotropic strain and flow induced shear stress combinations

Endothelial cells (ECs) are continuously exposed in vivo to cyclic strain and shear stress from pulsatile blood flow. When these stimuli are applied in vitro, ECs adopt an appearance resembling their in vivo state, most apparent in their alignment (perpendicular to uniaxial strain and along the flow). Uniaxial strain and flow perpendicular to the strain, used in most in vitro studies, only represent the in vivo conditions in straight parts of vessels. The conditions present over large fractions of the vasculature can be better represented by anisotropic biaxial strains at various orientations to flow. To emulate these biological complexities in vitro, we have developed a medium-throughput device to screen for the effects on cells of variously oriented anisotropic biaxial strains and flow combinations. Upon the application of only strains for 24 h, ECs (HUVECs) aligned perpendicular to the maximum principal strain and the alignment was stronger for a higher maximum:minimum principal strain ratio. A 0.55 Pa shear stress, when applied alone or with strain for 24 h, caused cells to align along the flow. Studying EC response to such combined physiological mechanical stimuli was not possible with existing platforms and to our best knowledge, has not been reported before.

Transport physics and biorheology in the setting of hemostasis and thrombosis

The biophysics of blood flow can dictate the function of molecules and cells in the vasculature with consequent effects on hemostasis, thrombosis, embolism, and fibrinolysis. Flow and transport dynamics are distinct for (i) hemostasis vs. thrombosis and (ii) venous vs. arterial episodes. Intraclot transport changes dramatically the moment hemostasis is achieved or the moment a thrombus becomes fully occlusive. With platelet concentrations that are 50- to 200-fold greater than platelet-rich plasma, clots formed under flow have a different composition and structure compared with blood clotted statically in a tube. The platelet-rich, core/shell architecture is a prominent feature of self-limiting hemostatic clots formed under flow. Importantly, a critical threshold concentration of surface tissue factor is required for fibrin generation under flow. Once initiated by wall-derived tissue factor, thrombin generation and its spatial propagation within a clot can be modulated by γ'-fibrinogen incorporated into fibrin, engageability of activated factor (FIXa)/activated FVIIIa tenase within the clot, platelet-derived polyphosphate, transclot permeation, and reduction of porosity via platelet retraction. Fibrin imparts tremendous strength to a thrombus to resist embolism up to wall shear stresses of 2400 dyne cm(-2) . Extreme flows, as found in severe vessel stenosis or in mechanical assist devices, can cause von Willebrand factor self-association into massive fibers along with shear-induced platelet activation. Pathological von Willebrand factor fibers are A Disintegrin And Metalloprotease with ThromboSpondin-1 domain 13 resistant but are a substrate for fibrin generation due to FXIIa capture. Recently, microfluidic technologies have enhanced the ability to interrogate blood in the context of stenotic flows, acquired von Willebrand disease, hemophilia, traumatic bleeding, and drug action.

The Imaging Modulography Technique Revisited for High-Definition Intravascular Ultrasound: Theoretical Framework

Mechanical characterization of atherosclerotic lesions remains an essential step for the detection of vulnerable plaques (VPs). Recently, an intravascular ultrasound (IVUS) elasticity reconstruction method (iMOD) has been tested in vivo by our group. The major limitation of iMOD is the need to estimate the strain field in the entire VP despite attenuated depth penetration signals when using high-definition (HD) IVUS systems. Therefore, an extended iMOD approach (E-iMOD) was designed and applied to coronary lesions of patients imaged in vivo with IVUS. The E-iMOD method (i) quantified necrotic core areas with a mean absolute relative error of 3.5 ± 3.5% and (ii) identified Young's moduli of the necrotic cores and fibrous regions with mean values of 5.7 ± 0.8 kPa and 794.5 ± 22.0 kPa instead of 5 kPa and 800 kPa, respectively. This study demonstrates the potential of the improved HD-IVUS modulography technique E-iMOD to characterize coronary VPs.

Piecewise Pulse Wave Imaging (pPWI) for Detection and Monitoring of Focal Vascular Disease in Murine Aortas and Carotids In Vivo

Atherosclerosis and Abdominal Aortic Aneurysms (AAAs) are two common vascular diseases associated with mechanical changes in the arterial wall. Pulse Wave Imaging (PWI), a technique developed by our group to assess and quantify the mechanical properties of the aortic wall in vivo, may provide valuable diagnostic information. This work implements piecewise PWI (pPWI), an enhanced version of PWI designed for focal vascular diseases. Localized, sub-regional PWVs and PWI moduli ( EPWI ) were estimated within 2-4 mm wall segments of murine normal, atherosclerotic and aneurysmal arteries. Overall, stiffness was found to increase in the atherosclerotic cases. The mean sub-regional PWV was found to be 2.57±0.18 m/s for the normal aortas (n = 7) with a corresponding mean EPWI of 43.82±5.86 kPa. A significant increase ( (p ≤ 0.001)) in the group means of the sub-regional PWVs was found between the normal aortas and the aortas of mice on high-fat diet for 20 ( 3.30±0.36 m/s) and 30 weeks ( 3.56±0.29 m/s). The mean of the sub-regional PWVs ( 1.57±0.78 m/s) and EPWI values ( 19.23±15.47 kPa) decreased significantly in the aneurysmal aortas (p ≤ 0.05) . Furthermore, the mean coefficient of determination (r(2)) of the normal aortas was significantly higher (p ≤ 0.05) than those of the aneurysmal and atherosclerotic cases. These findings demonstrated that pPWI may be able to provide useful biomarkers for monitoring focal vascular diseases.

Carotid plaque elasticity estimation using ultrasound elastography, MRI, and inverse FEA - A numerical feasibility study

The material properties of atherosclerotic plaques govern the biomechanical environment, which is associated with rupture-risk. We investigated the feasibility of noninvasively estimating carotid plaque component material properties through simulating ultrasound (US) elastography and in vivo magnetic resonance imaging (MRI), and solving the inverse problem with finite element analysis. 2D plaque models were derived from endarterectomy specimens of nine patients. Nonlinear neo-Hookean models (tissue elasticity C1) were assigned to fibrous intima, wall (i.e., media/adventitia), and lipid-rich necrotic core. Finite element analysis was used to simulate clinical cross-sectional US strain imaging. Computer-simulated, single-slice in vivo MR images were segmented by two MR readers. We investigated multiple scenarios for plaque model elasticity, and consistently found clear separations between estimated tissue elasticity values. The intima C1 (160 kPa scenario) was estimated as 125.8 ± 19.4 kPa (reader 1) and 128.9 ± 24.8 kPa (reader 2). The lipid-rich necrotic core C1 (5 kPa) was estimated as 5.6 ± 2.0 kPa (reader 1) and 8.5 ± 4.5 kPa (reader 2). A scenario with a stiffer wall yielded similar results, while realistic US strain noise and rotating the models had little influence, thus demonstrating robustness of the procedure. The promising findings of this computer-simulation study stimulate applying the proposed methodology in a clinical setting.

Effects of severity and location of stenosis on the hemodynamics in human aorta and its branches

Pulsatile blood flow is studied in a three-dimensional model of human thoracic aorta at different stages of atherosclerotic lesion growth, taking into account the effect of atherosclerotic plaque location and peripheral symmetry. The model is reconstructed from the computed tomography images. The wall shear stress (WSS), time-averaged WSS, and the oscillatory shear index are applied to determine susceptible sites for the onset of early atherosclerosis. Then, two different degrees of stenosis severity, 50 and 80 %, are introduced to vulnerable areas of the healthy aorta geometry. The overriding issue addressed is that the WSS distribution and magnitude are strongly affected by the atherosclerotic plaque size, its symmetric features, and the location, i.e., the branch it is formed. The present study, for the first time, is capable of providing information on the high shear environment that may exist upon the rupture of plaque surface and any thrombosis due to platelet deposition. The magnitude of WSS and its distribution at the throat of 50 % stenosed aortic arch are in agreement with the previous numerical study (Huang et al. in Exp Fluids 48(3):497-508, 2010). Results show that WSS values exceed 50 Pa at the throat of 80 % stenosed left common carotid and brachiocephalic arteries.

Computational fluid dynamics in coronary artery disease

Computational fluid dynamics (CFD) is a widely used method in mechanical engineering to solve complex problems by analysing fluid flow, heat transfer, and associated phenomena by using computer simulations. In recent years, CFD has been increasingly used in biomedical research of coronary artery disease because of its high performance hardware and software. CFD techniques have been applied to study cardiovascular haemodynamics through simulation tools to predict the behaviour of circulatory blood flow in the human body. CFD simulation based on 3D luminal reconstructions can be used to analyse the local flow fields and flow profiling due to changes of coronary artery geometry, thus, identifying risk factors for development and progression of coronary artery disease. This review aims to provide an overview of the CFD applications in coronary artery disease, including biomechanics of atherosclerotic plaques, plaque progression and rupture; regional haemodynamics relative to plaque location and composition. A critical appraisal is given to a more recently developed application, fractional flow reserve based on CFD computation with regard to its diagnostic accuracy in the detection of haemodynamically significant coronary artery disease.