Green ecofriendly bio-deinking of mixed office waste paper using various enzymes from Rhizopus microsporus AH3: efficiency and characteristics

Green ecofriendly enhancement of cellulase productivity using agricultural wastes by Aspergillus terreus MN901491: statistical designs and detergent ability on cotton fabrics

BACKGROUND

Cellulase is considered a group member of the hydrolytic enzymes, responsible for catalyzing the hydrolysis of cellulose and has various industrial applications. Agricultural wastes are used as an inexpensive source for several utilizable products throughout the world. So, searching for cellulase enzymes from fungal strains capable of utilizing agricultural wastes to increase productivity, reduce costs and overcome waste accumulation in the environment is very important to evaluate its potency as a bio-additive to detergent agents.

RESULTS

In the current study, the previously identified fungal strain Aspergillus terreus MN901491 was screened and selected for cellulase production. Medium parameters were optimized using one-factor-at-a-time (OFAT) and multi-factorial (Plackett-Burman and Box-Behnken) design methods. OFAT showed the ability of the fungal strain to utilize agricultural wastes (corn cob and rice straw) as a substrate. Also, yeast extract was the best nitrogen source for enhancing cellulase productivity. The most significant variables were determined by Plackett-Burman Design (PBD) and their concentrations were optimized by Response Surface Methodology (RSM) using Box-Behnken Design (BBD). Among eleven independent variables screened by PBD, malt extract, (NH4)2SO4, and KCl were the most significant ones followed by rice straw which affected cellulase production positively. The ANOVA results particularly the R2-value of PBD (0.9879) and BBD (0.9883) confirmed the model efficiency and provided a good interpretation of the experiments. PBD and BBD improved cellulase productivity by 6.1-fold greater than that obtained from OFAT. Medium optimization using OFAT and statistical models increased cellulase production from A. terreus MN901491 by 9.3-fold compared to the non-optimized medium. Moreover, the efficiency of cellulase activity on cotton fabrics as a bio-additive detergent was evaluated and estimated using whiteness and scanning electron microscope (SEM) that affirmed its potential effect and remarkable detergent ability to improve whiteness by 200% in comparison with non-washed fabric and by 190% in comparison with fabric washed by water.

CONCLUSION

The presented work was stabilized as a multi-efficiency in which wastes were used to produce cellulase enzyme from the fungal strain, Aspergillus terreus MN901491 as a bio-additive to detergent applications that involved ecofriendly and green processes.

Bioremediation of hazardous heavy metals by marine microorganisms: a recent review

Heavy metals (HMs) like Zn, Cu, Pb, Ni, Cd, and Hg, among others, play a role in several environmental problems. The marine environment is polluted by several contaminants, such as HMs. A variety of physico-chemical methods usually available for sanitation HMs remediation suffer from either limitation. Bioremediation is a promising way of dealing with HMs pollution. Microbes have the ability with various potencies to resist HMs tension. The current review discusses the main sources and influences of HMs, the role of marine microorganisms in HMs bioremediation, as well as the microbial mechanisms for HMs detoxification and transformation. This review paper aims to provide an overview of the bioremediation technologies that are currently available for the removal of HMs ions from industrial and urban effluent by aquatic organisms such as bacteria, fungi, and microalgae, particularly those that are isolated from marine areas. The primary goals are to outline various studies and offer helpful information about the most important aspects of the bioelimination techniques. The biotreatment practices have been primarily divided into three techniques based on this topic. They are biosorption, bioaccumulation, bioleaching, and biotransformation. This article gives the brief view on the research studies about bioremediation of HMs using marine microorganisms. The current review also deals with the critical issues and recent studies based on the HMs biodetoxification using aquatic microorganisms.

Sustainable multifunctional zinc oxide quantum dots-aided double-layers security paper sheets

Fluorescence is well-known nowadays as one of the most efficient anti-counterfeiting techniques. Zinc oxide quantum dots (ZnOQds) are exceptionally fluorescence when exposed to ultraviolet (UV) light, which makes them a candidate for anti-counterfeiting printing. The resulting anti-counterfeiting papers are sustainable and resistance against organic dyes. In this work, ZnOQds were prepared via a green method and characterized under UV-visible spectroscopy, along with microscopic observations by transmission electron microscopy (TEM) and crystallography by X-ray diffraction (XRD). Formation of ZnOQds nanocrystals with an average partials size of 7.3 nm was approved. Additionally, double-layers sheets were prepared at two loading concentrations of ZnOQds, namely 0.5 and 1 (wt./v) and underwent characterization using a topographical surface study via field emission scanning electron microscopy (FE-SEM). Hybrid sheets were mechanically more stable compared to single-layer paper and likewise polymer film. Moreover, aging simulation approved a high stability for hybrid sheets. Particularly, the photoluminescence emission affirmed anti-aging character of hybrid paper for more than 25 years. The hybrid sheets also showed a broad range of antimicrobial activity.

Development of a chitosan derivative bearing the thiadiazole moiety and evaluation of its antifungal and larvicidal efficacy

A new chitosan derivative bearing a new thiadiazole compound was developed, and its antifungal and larvicidal activities were investigated. The chitosan derivative (coded here as PTDz-Cs) was synthesized by the reaction between the carboxylic derivative of the thiadiazole moiety and chitosan. Fourier transform infrared spectroscopy (FT-IR), nuclear magnetic resonance (1H/13C-NMR), gas chromatography–mass spectrometry (GC–MS), elemental analysis, X-Ray diffraction (XRD), thermogravimetric analysis (TGA), and X-ray photoelectron spectroscopy (XPS) were used to characterize the developed derivatives. Compared to chitosan, the PTDz-Cs derivative has a less crystalline structure and less thermal stability. The antifungal results revealed that PTDz-Cs exhibited potential activity against Rhizopus microspores, Mucor racemosus, Lichtheimia corymbifera, and Syncephalastrum racemosum where inhibition zones were 17.76, 20.1, 38.2, and 18.3 mm, respectively. The larvicidal efficacy of the PTDz-Cs derivative against A. stephensi larvae was tested, and the results exposed that the LC50 and LC90 values (first instar) were 5.432 and 10.398 ppm, respectively, indicating the high susceptibility of early instar mosquito larvae to PTDz-Cs. These results emphasize that this study provided a new chitosan derivative that could be potentially used in the biomedical fields.

Multi-efficient endoglucanase from Aspergillus niger MPS25 and its potential applications in saccharification of wheat straw and waste paper deinking

The deinking in the paper industry is in great demand, and microbial enzymes are key players. In the present study, the endoglucanase production from newly isolated fungi Aspergillus niger MPS25 is reported. The optimization of endoglucanase production was carried out using one factor at a time approach resulting in endoglucanase activity (2.37 IU/ml) at 45 °C and pH 8 in submerged fermentation (SmF), which shows optimum enzyme activity at 60 °C. Interestingly, the metal ions viz. Co²⁺ stimulated the endoglucanase activity, whereas Mn²⁺ reduced the enzyme activity, which shows that this enzyme can be used for effluent treatment released through deinking. The enzymatic hydrolysis of wheat straw produced 26.96 ± 0.108 mg/g of reducing sugars, indicating its potential in saccharification and the biofuel industry. Furthermore, the validation of the deinking efficiency of this enzyme resulted in improved deinking of mixed office waste and old newspapers by 31.5% and 20.4%, respectively. The strength properties, viz. burst factor and tear index, breaking length, and tensile index of the handmade paper sheets, were also improved which were analyzed by the scanning electron micrographs. The FTIR and XRD analysis of pulp provided insights into the changes in functional groups and cellulose crystallinity, respectively. These results indicate that multi-efficient endoglucanase from Aspergillus niger MPS25 is suitable for enzyme-based eco-friendly deinking for waste paper recycling and lignocellulosic biomass saccharification.

Chemical and enzymatic deinking efficiency of agricultural and industrial waste fiber-based paper packaging

BACKGROUND

Deinking is an important part of paper recycling that involves the removal of ink particles from the paper fibres. This industrial process is important so that the fibres can be recirculated back into paper production, which enables better sustainability as fewer fresh fibres are needed. In this study, we examined five different alternative fibre materials from different agricultural residues and industrial processes for the pilot production of papers. Papers containing fibres from invasive plants (Japanese knotweed), dedicated crops (miscanthus, acacia), agricultural residues (tomato stems), and industrial waste (jute - fibres from coffee bags) were printed with water-based flexo inks and deinked with two separate processes (chemical and enzymes). Mechanical (break and tensile index, breaking length) and optical properties (ISO whiteness, brightness and CIE L*a*b* values) were measured and ink elimination IR700 and deinking efficiency was calculated for the two deinking processes.

RESULTS

Enzymatic treatment improved the mechanical properties of deinked pulp in comparison with the classic chemical treatment. Mechanical strength for almost all papers increased slightly (breaking length up to 20% in tomato and jute), and the optical result (brightness) increased similarly for both processes due to the bleaching action of the colour-shaded samples, whereas the deinking efficiency showed mixed results between chemical- and enzyme-type deinking (with chemical achieving better elimination measured at 700 nm) in the typical range of ink elimination values (15-35%) for flexographic inks. This indicates further optimization of the deinking with enzymes is needed due to different alternative fibre compositions and variations of residues in the delignification processes.

CONCLUSION

Using a combination of adjusted enzymatic treatment as a precursor for deinking of paper-based packaging materials sourced from alternative fibres showed promising results regarding mechanical properties, whereas the optical properties need to be improved with cellulase optimization or by using mixes of different enzymes. These kinds of paper materials printed with flexo inks were found to be successfully deinkable with the chemical ISO-based deinking protocol. © 2022 Society of Chemical Industry.

Lignocellulolytic Biocatalysts: The Main Players Involved in Multiple Biotechnological Processes for Biomass Valorization

Human population growth, industrialization, and globalization have caused several pressures on the planet's natural resources, culminating in the severe climate and environmental crisis which we are facing. Aiming to remedy and mitigate the impact of human activities on the environment, the use of lignocellulolytic enzymes for biofuel production, food, bioremediation, and other various industries, is presented as a more sustainable alternative. These enzymes are characterized as a group of enzymes capable of breaking down lignocellulosic biomass into its different monomer units, making it accessible for bioconversion into various products and applications in the most diverse industries. Among all the organisms that produce lignocellulolytic enzymes, microorganisms are seen as the primary sources for obtaining them. Therefore, this review proposes to discuss the fundamental aspects of the enzymes forming lignocellulolytic systems and the main microorganisms used to obtain them. In addition, different possible industrial applications for these enzymes will be discussed, as well as information about their production modes and considerations about recent advances and future perspectives in research in pursuit of expanding lignocellulolytic enzyme uses at an industrial scale.

A novel pressed coal from citrus and cooking oil wastes using fungi

Nowadays renewable energy with low prices is a global target that has taken the attention to compare alternatives energy sources with fossil fuels. Therefore, this study was established to find suitable and sustainable alternative low-cost fuels source. Cooking oil waste (COW) was mixed with non-pretreated citrus tree fibers (CTF) (0.5 mL to 1 g ratio) and pressed to formulate coal (CTF/COW). Otherwise, this mixture was subjected to in situ fungal pretreated using Aspergillus flavus isolate to simplify the mixture composition and pressed to offer in a usable form with enhancing their heating value for the first time. CTF/COW was characterized using attenuated total reflection Fourier-transform infrared spectroscopy (ATR-FTIR), scanning electron microscope (SEM) and thermal analysis (TGA) before and after treatment. The fungal isolate was observed with enzyme productivity and activity of CMCase, avicelase, xylanase, mannanase, α-glucosidase, β-glucosidase, lignin peroxidase and lipase according to enzyme assays and the chemical compositions of CTF before and after fungal treatment, where the best PH for enzymes extraction was between 5 and 7. The fungal enzymes increased the heating value by about two and half folds in comparison with non-pretreated coal. Moreover, the calorific value of tCTF/COW was 43,422 kJ/kg, which was higher than CTF recorded 18,214 kJ/kg and COW recorded 39,823 kJ/kg. Our result suggests that fungal treatment of the mixture of citrus trees and cooking oil waste presents as a promising low-cost and eco-friendly coal.

Antagonistic Effect of Plant Growth-Promoting Fungi Against Fusarium Wilt Disease in Tomato: In vitro and In vivo Study

Fusarium wilt is considered one of the most destructive diseases for tomato plants. The novelty of this work was to investigate the antifungal and plant growth-promoting capabilities of some plant growth-promoting fungi (PGPF). Plant growth-promoting fungi (PGPF) improved the plant health and control plant infections. In this study, two fungal strains as PGPF were isolated and identified as Aspergillus fumigatus and Rhizopus oryzae using molecular method. The extracts of A. fumigatus and R. oryzae exhibited promising antifungal activity against F. oxysporum in vitro. Moreover, antagonistic effect of A. fumigatus and R. oryzae against F. oxysporum causing tomato wilt disease was evaluated in vivo. Disease severity and growth markers were recorded and in vitro antagonistic activity assay of the isolated A. fumigatus and R. oryzae against Fusarium oxysporum was measured. Physiological markers of defense in plant as response to stimulate systemic resistance (SR) were recorded. Our results indicated that A. fumigatus and R. oryzae decreased the percentage of disease severity by 12.5 and 37.5%, respectively. In addition, they exhibited relatively high protection percentage of 86.35 and 59.06% respectively. Fusarium wilt was declined the growth parameters, photosynthetic pigments, total soluble carbohydrate, and total soluble protein, whereas content of free proline, total phenols, and the activity of antioxidant enzymes activity increased under infection. Moreover, application of A. fumigatus and R. oryzae on infected plants successfully recovered the loss of morphological traits, photosynthetic pigment total carbohydrates, and total soluble proteins in comparison to infected control plants. PGPF strains in both non-infected and infected plants showed several responses in number and density of peroxidase (POD) and polyphenol oxidase (PPO) isozymes.

Inhibitory and Stimulatory Effects of Fruit Bioactive Compounds on Edible Filamentous Fungi: Potential for Innovative Food Applications

The fermentation of fruit processing residuals (FPRs) with filamentous fungi can provide protein-rich food products. However, FPRs that contain bioactive compounds with antimicrobial properties present a major challenge. In this work, the resistance of two edible filamentous fungi, Rhizopus oligosporus and Neurospora intermedia, to 10 typically inhibiting bioactive compounds available in FPRs (epicatechin, quercetin, ellagic acid, betanin, octanol, hexanal, D-limonene, myrcene, car-3-ene, and ascorbic acid) was examined. These compounds’ inhibitory and stimulatory effects on fungal growth were examined individually. Three different concentrations (2.4, 24, and 240 mg/L) within the natural concentration range of these compounds in FPRs were tested. These bioactive compounds stimulated the growth yield and glucose consumption rate of R. oligosporus, while there was no increase in the biomass yield of N. intermedia. Ellagic acid caused an up to four-fold increase in the biomass yield of R. oligosporus. In addition, octanol and D-limonene showed antifungal effects against N. intermedia. These results may be helpful in the development of fungus-based novel fermented foods.

Ecofriendly Synthesis of Biosynthesized Copper Nanoparticles with Starch-Based Nanocomposite: Antimicrobial, Antioxidant, and Anticancer Activities

In recent years, polysaccharides-based nanocomposites have been used for biomedical applications. In the current study, a nanocomposite based on myco-synthesized copper nanoparticles (CuNPs) and starch was prepared. The prepared nanocomposite was fully characterized using UV-visible spectroscopy (UV-vis), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDX), mapping, transmission electron microscope (TEM), and dynamic light scattering (DLS). Results revealed that this nanocomposite is characterized by nano spherical shape ranged around 200 nm as well as doped with CuNPs with size about 9 nm. Antimicrobial, antioxidant, and anticancer activities of the prepared nanocomposite were evaluated. Results revealed that CuNPs-based nanocomposite exhibited outstanding antibacterial and antifungal activity toward Escherichia coli ATCC25922, Bacillus subtilis ATCC605, Candida albicans ATCC90028, Cryptococcus neoformance ATCC 14,116, Aspergillus niger RCMB 02,724, A. terreus RCMB 02,574, and A. fumigatus RCMB 02,568. Moreover, CuNPs-based nanocomposite has a strong antioxidant activity as compared to ascorbic acid, where IC₅₀ was 18 µg/mL. Cytotoxicity test of CuNPs-based nanocomposite revealed that this nanocomposite is safe in use, where IC₅₀ was 185.1 µg/mL. Furthermore, CuNPs-based nanocomposite exhibited potential anticancer activity against MCF7 cancerous cell line where IC₅₀ was 62.8 µg/mL which was better than CuNPs alone. In conclusion, the prepared CuNPs with starch-based nanocomposite is promising for different biomedical applications as antimicrobial, antioxidant, and anticancer activities.

Antifungal Activity of Endophytic Aspergillus terreus Extract Against Some Fungi Causing Mucormycosis: Ultrastructural Study

Endophytes fungi are applied as favorable safe antifungal agents as well as natural bioactive compounds reservoir. In the current study, the inhibitory effect of endophytic fungus was explained by direct antifungal activity against fungi causing mucormycosis, ultrastructural, and determination of active compounds in fungal extract. Endophytic Aspergillus terreus was isolated from healthy Moringa oleifera leaves and identified morphologically and genetically, and was recorded in gene bank with accession number MW444551.1. Phytochemical analysis and gas chromatography-mass spectroscopy (GC–MS) of ethyl acetate crude extract (EACE) of A. terreus were performed. GC–MS results of EACE of A. terreus revealed that fungal extract contains 16 major bioactive compounds with extensive pharmaceutical activities. Furthermore, EACE of A. terreus revealed a promising antifungal activity against fungi causing mucormycosis as Rhizopus oryzae, Mucor racemosus, and Syncephalastrum racemosum, where inhibition zones of EACE (10 mg/ml) were 20, 37, and 18 mm, respectively. Minimum inhibitory concentration (MIC) of EACE was 0.3125 toward M. racemosus, while 1.25 and 2.5 mg/ml against R. oryzae and S. racemosum, respectively. In the same context, treated R. oryzae, M. racemosus, and S. racemosum with EACE of A. terreus revealed elevation of membrane lipid peroxidation which approves membrane leakage. Furthermore, ultrastructure changes were observed which established alteration in both sporangium and hyphal structures; cell membrane and cytoplasm leakage. In conclusion, endophytic A. terreus has an outstanding antifungal activity against fungi causing mucormycosis.

Improved deinking and biobleaching efficiency of enzyme consortium from Thermomyces lanuginosus VAPS25 using genetic Algorithm-Artificial neural network based tools

The present study reports the combined enzymatic production efficiency of thermophilic fungus Thermomyces lanuginosus VAPS25 using a combinatory artificial intelligence-based tool, resulting in 2.7 IU/ml, 5.2 IU/ml, and 18.85 U/ml activity of endoglucanase, amylase, and lipase, respectively with good thermostability at 90 °C (pH 8-10). Interestingly, the metal ions viz. Cu²⁺ and Mg²⁺ increased the endoglucanase activity to 5 folds, i.e.,5.6 IU/ml compared to control. Further, the amylase and lipase activity was also enhanced by Fe²⁺ and Co²⁺ to 5.4 IU/ml and 19.57 U/ml, respectively. Additionally, the deinking efficiency was improved by 68.9%, 42.7%, and 52.8% by endoglucanase, amylase, and lipase, respectively, while the consortium increased the deinking efficiency to 72.7%. The bio-bleached paper strength parameters such as burst index, breaking length, tear index, and tensile index of sheets were significantly improved by 1.38%, 13.54%, 7.54%, and 20.88%, respectively. These enzymes at an industrial scale would help develop an economical paper recycling process.

Potential of biosynthesized zinc oxide nanoparticles to control Fusarium wilt disease in eggplant (Solanum melongena) and promote plant growth

In this study, a novel, non-toxic, eco-friendly zinc oxide nanoparticles (ZnO-NPs) was used instead of the synthetic fungicides widely used to control the destructive phytopathogenic fungus Fusarium oxysporum, the causative agent of wilt disease in Solanum melongena L. Herein, the biosynthesized ZnO-NPs was carried out by Penicillium expansum ATCC 7861. In vitro, mycosynthesized ZnO-NPs exhibited antifungal activity against Fusarium oxysporum. In vivo, ZnO-NPs suppressed Fusarium wilt disease in cultivated Solanum melongena L. by decreasing the disease severity with 75% of plant protection. Moreover, ZnO-NPs stimulated the recovery of eggplant as an indicated by improving of morphological and metabolic indicators including plant height(152.5%), root length(106.6%), plant fresh biomass (146%), chlorophyll a (102.8%), chlorophyll b (67.86%), total soluble carbohydrates (48.5%), total soluble protein (81.8%), phenol (10.5%), antioxidant activity and isozymes compared with infected control. Therefore, this study suggests using mycosynthesized ZnO-NPs as an alternative to synthetic fungicides not only to eradicate the Fusarium wilt disease in cultivated eggplant (Solanum melongena) but also to promote the growth parameters and metabolic aspects.

Partial purification of bacterial cellulo-xylanolytic enzymes and their application in deinking of photocopier waste paper

The potential of alkaline cellulo-xylanolytic enzymes from non-pathogenic Bacillus subtilis strain was tested for deinking of photocopier waste paper. Cellulase and xylanase play a crucial role in deinking of different types of waste paper. Partial purification of cellulo-xylanolytic enzymes was carried out using ultrafiltration followed by ammonium sulfate precipitation. The ultrafiltered enzyme was used for deinking the photocopier waste paper along with chemical deinking. An enzyme dose of 0.6 IU/g and reaction time of 60 min for ultrafiltered cellulo-xylanolytic enzyme significantly increased deinking efficiency, tear index (9.52%) and folding endurance (5±2%) as compared to chemical deinking. There was improvement in strength properties such as tear index and double-fold along with freeness of pulp (18%). There was slight decrease in tensile index (0.6%) and burst index (16%) while ISO brightness remained unaffected. Enzymatic deinking (74.3%) by ultrafiltered cellulo-xylanolytic from Bacillus subtilis was found significant over conventional chemical deinking.

A new approach for antimicrobial and antiviral activities of biocompatible nanocomposite based on cellulose, amino acid and graphene oxide

In this work, biocompatible, antimicrobial, and antiviral nanocomposites were prepared through two steps. In the first step, periodate oxidation of cellulose was performed to get dialdehyde cellulose (DAC). The second step included the reaction of DAC with sulfur-containing amino acids included Cysteine (Cys) and Methionine (Meth) in the presence of graphene oxide (GO). The prepared nanocomposites were characterized via FT-IR, SEM, TEM, and TGA. Antimicrobial and antiviral activities for all designed nanocomposites besides DAC were carried out. Both DAC/GO/Cys and DAC/GO/Meth exhibited a promising antimicrobial activity against Gram-negative (E. coli and P. aeruginosa), Gram-positive (B. subtilis and S. aureus), and unicellular fungi (C. Albicans and C. neoformans), while the DAC/GO/Cys/Meth nanocomposite was the lowest. Moreover, all designed nanocomposites have a strong antiviral activity against Herpes simplex virus 1(HSV-1) at minimum nontoxic concentration. Additionally, Computational procedures and Molecular docking showed the reactivity and stability of the molecules that have biological activity against Gram-positive, Gram-negative, and HSV-1. As well as DAC incorporation with amino acid enhanced their reactivity and their interaction.

Antimicrobial, Antioxidant, Cytotoxic Activities and Phytochemical Analysis of Fungal Endophytes Isolated from Ocimum Basilicum

Fungal endophytes are living inside plants without any harmful effects; the prospecting about them is increased day by day because they can produce bioactive compounds which can be used in different applications. Herein, the current study was aimed to isolate the endophytic fungi from the Ocimum basilicum plant as safe microorganisms and evaluate their biological activities. The results illustrated that three endophytic fungal strains were isolated and identified morphologically and genetically as Aspergillus nidulans, Aspergillus fumigatus, and Aspergillus flavus and deposited in gene bank under accession numbers MZ045561, MZ045562, and MZ045563 respectively. Moreover, cell-free filtrates of endophytic fungal strains were extracted using ethyl acetate, where these crude extracts exhibited promising antimicrobial activity against Staphylococcus aureus, Bacillus cereus, Bacillus subtilis, Escherichia coli, Salmonella typhimurium, Pseudomonas aeruginosa, Klebsiella pneumonia, and Candida albicans at a concentration of 1000 µg/mL. Furthermore, these endophytic strains exhibited a potential antioxidant activity where IC₅₀ of the crude extract of A. nidulans, A. fumigatus, and A. flavus were (166.3, 68.4, and 347.1 µg/mL) and (151.2, 77.9, and 246.3 µg/mL) using DPPH and ABTS methods, respectively. Furthermore, the ethyl acetate crude extracts of these endophytic fungi did not exhibit any cytotoxic effect against Vero and Wi 38 normal cells. GC-MS analysis of the crude extract of A. nidulans, A. fumigatus, and A. flavus indicated the presence of 22, 22, and 20 active compounds, respectively. The major compounds in the fungal extracts are belonging to fatty acids, fatty acid esters, tetrahydrofurans, and sterols. In conclusion, the isolated endophytic A. nidulans, A. fumigatus, and A. flavus from Ocimum basilicum are promising sources for bioactive compounds.

Biomedical Applications of Mycosynthesized Selenium Nanoparticles Using Penicillium expansum ATTC 36200

In this study, green and eco-friendly biosynthesis of selenium nanoparticles (Se-NPs) were performed using Penicillium expansum ATTC 36200 for multiple biomedical applications. Mycosynthesized Se-NPs were completely characterized using UV, FT-IR, XRD, SEM, and TEM techniques. Se-NPs biosynthesized by P. expansum was characterized as a spherical shape with average size 4 to 12.7 nm. Moreover, Se-NPs were evaluated for multiple biomedical applications as antimicrobial, antioxidant, and anticancer activities and hemocompatibility. Results illustrated that Se-NPs have potential antimicrobial activity against Gram-positive (Bacillus subtilis ATCC6051 and Staphylococcus aureus ATCC23235), Gram-negative bacteria (Escherichia coli ATCC8739and Pseudomonas aeruginosa ATCC9027), fungi (Candida albicans ATCC90028, Aspergillus niger RCMB 02724 and Aspergillus fumigatus RCMB 02568), and antioxidant activity. Additionally, Se-NPs exhibited anticancer activity against PC3 cell line; IC50 was 99.25 μg/mL. Meanwhile, they showed non-hemolytic activity on human RBCs at concentration up to 250 μg/mL. In conclusion, biosynthetic Se-NPs by P. expansum are promising for many safe-use biomedical applications.

Xylanolytic Enzymes in Pulp and Paper Industry: New Technologies and Perspectives

The pulp and paper industry discharges massive amount of wastewater containing hazardous organochlorine compounds released during different processing stages. Therefore, some cost-effective and nonpolluting practices such as enzymatic treatments are required for the potential mitigation of effluents released in the environment. Various xylanolytic enzymes such as xylanases, laccases, cellulases and hemicellulases are used to hydrolyse raw materials in the paper manufacturing industry. These enzymes are used either individually or in combination, which has the efficient potential to be considered for bio-deinking and bio-bleaching components. They are highly dynamic, renewable, and high in specificity for enhancing paper quality. The xylanase act on the xylan and cellulases act on the cellulose fibers, and thus increase the bleaching efficacy of paper. Similarly, hemicellulase enzyme like endo-xylanases, arabinofuranosidase and β-D-xylosidases have been described as functional properties towards the biodegradation of biomass. In contrast, laccase enzymes act as multi-copper oxidoreductases, bleaching the paper by the oxidation and reduction process. Laccases possess low redox potential compared to other enzymes, which need some redox mediators to catalyze. The enzymatic process can be affected by various factors such as pH, temperature, metal ions, incubation periods, etc. These factors can either increase or decrease the efficiency of the enzymes. This review draws attention to the xylanolytic enzyme-based advanced technologies for pulp bleaching in the paper industry.

Application of surfactants in papermaking industry and future development trend of green surfactants

In this work, the application of chemical surfactants, including cooking aids, detergents, surface sizing agents, and deinking agents as core components, is introduced in the wet end of pulping and papermaking. This method for the combined application of enzymes and surfactants has expanded, promoting technological updates and improving the effect of surfactants in practical applications. Finally, the potential substitution of green surfactants for chemical surfactants is discussed. The source, classification, and natural functions of green surfactants are introduced, including plant extracts, biobased surfactants, fermentation products, and woody biomass. These green surfactants have advantages over their chemically synthesized counterparts, such as their low toxicity and biodegradability. This article reviews the latest developments in the application of surfactants in different paper industry processes and extends the methods of use. Additionally, the application potential of green surfactants in the field of papermaking is discussed. KEY POINTS: • Surfactants as important chemical additives in papermaking process are reviewed. • Deinking technologies by combined of surfactants and enzymes are reviewed. • Applications of green surfactant in papermaking industry are prospected.

Improved strategies to efficiently isolate thermophilic, thermotolerant, and heat-resistant fungi from compost and soil

Thermophilic, thermotolerant and heat-resistant fungi developed different physiological traits, enabling them to sustain or even flourish under elevated temperatures, which are life-hostile for most other eukaryotes. With the growing demand of heat-stable molecules in biotechnology and industry, the awareness of heat-adapted fungi as a promising source of respective enzymes and biomolecules is still increasing. The aim of this study was to test two different strategies for the efficient isolation and identification of distinctly heat-adapted fungi from easily accessible substrates and locations. Eight compost piles and ten soil sites were sampled in combination with different culture-dependent approaches to describe suitable strategies for the isolation and selection of thermophilous fungi. Additionally, an approach with a heat-shock treatment, but without elevated temperature incubation led to the isolation of heat-resistant mesophilic species. The cultures were identified based on morphology, DNA barcodes, and microsatellite fingerprinting. In total, 191 obtained isolates were assigned to 31 fungal species, from which half are truly thermophilic or thermotolerant, while the other half are heat-resistant fungi. A numerous amount of heat-adapted fungi was isolated from both compost and soil samples, indicating the suitability of the used approaches and that the richness and availability of those organisms in such environments are substantially high.

Bacillus megaterium-Mediated Synthesis of Selenium Nanoparticles and Their Antifungal Activity against Rhizoctonia solani in Faba Bean Plants

Rhizoctonia root-rot disease causes severe economic losses in a wide range of crops, including Vicia faba worldwide. Currently, biosynthesized nanoparticles have become super-growth promoters as well as antifungal agents. In this study, biosynthesized selenium nanoparticles (Se-NPs) have been examined as growth promoters as well as antifungal agents against Rhizoctonia solani RCMB 031001 in vitro and in vivo. Se-NPs were synthesized biologically by Bacillus megaterium ATCC 55000 and characterized by using UV-Vis spectroscopy, XRD, dynamic light scattering (DLS), and transmission electron microscopy (TEM) imaging. TEM and DLS images showed that Se-NPs are mono-dispersed spheres with a mean diameter of 41.2 nm. Se-NPs improved healthy Vicia faba cv. Giza 716 seed germination, morphological, metabolic indicators, and yield. Furthermore, Se-NPs exhibited influential antifungal activity against R. solani in vitro as well as in vivo. Results revealed that minimum inhibition and minimum fungicidal concentrations of Se-NPs were 0.0625 and 1 mM, respectively. Moreover, Se-NPs were able to decrease the pre-and post-emergence of R. solani damping-off and minimize the severity of root rot disease. The most effective treatment method is found when soaking and spraying were used with each other followed by spraying and then soaking individually. Likewise, Se-NPs improve morphological and metabolic indicators and yield significantly compared with infected control. In conclusion, biosynthesized Se-NPs by B. megaterium ATCC 55000 are a promising and effective agent against R. solani damping-off and root rot diseases in Vicia faba as well as plant growth inducer.

Ecofriendly novel synthesis of tertiary composite based on cellulose and myco-synthesized selenium nanoparticles: Characterization, antibiofilm and biocompatibility

Microbial infections are considered common and dangerous for humans among other infections; therefore the synthesis of high efficacy antimicrobial and anti-biofilm composites is continuous to fight microbial resistance. In our study, a new and novel tertiary composite (TC) was synthesized, it composed of TEMPO cellulose (TOC), chitosan, starch, and myco-synthesized Se-NPs. Myco-synthesized Se-NPs and TC were fully characterized using UV, FT-IR, XRD, SEM with EDX, particle distribution, and mapping. The antimicrobial and anti-biofilm properties of selenium nanoparticles (Se-NPs) were effectively established for Pseudomonas aeruginosa and Staphylococcus aureus biofilms. The possible impact of myco-synthesized novel cellulose-based selenium nanoparticles tertiary composite on the biofilm formation of P. aeruginosa, S. aureus, and Candida albicans was evaluated in this study. TC exhibited constant biofilm inhibition against P. aeruginosa, S. aureus, and C. albicans, while the results obtained from cytotoxicity of Se-NPs and TC showed that, alteration occurred in the normal cell line of lung fibroblast cells (Wi-38) was shown as loss of their typical cell shape, granulation, loss of monolayer, shrinking or rounding of Wi-38 cell with an IC₅₀ value of where 461 and 550 ppm respectively.

Sustainable hybrid silica extracted from rice husk with polyvinyl alcohol and nicotinic acid as multi adsorbent for textile wastewater treatment

A new eco-friendly compound was prepared for the treatment of textile wastewater containing mixed dyes with various ranges of toxicity. Porous silica was extracted from a black liquor by-product using a simple method and characterized by porous morphology (the pore size ranged between 12 and 41 nm). The silica is the main corrosive agent present in the black liquor; thus, the extraction of silica from the black liquor was considered detoxification process. The extracted porous silica was used as a precursor material to prepare the hybrid material based on polyvinyl alcohol (PVA) as a binder polymer and functionalized by nicotinic acid. The multifunction prepared hybrid was characterized by FT-IR, TGA, DTGA, SEM, and EDX. The porous size of the prepared hybrid varied from 96 nm to 620 nm and presents a high thermal stability in comparison with its parent materials. The adsorption of cationic and anionic dyes was carried out. The adsorption kinetics parameters were fitted with pseudo-first-order and pseudo-second-order kinetic models for methyl orange (MO) and methylene blue (MB), respectively. The adsorption parameters indicated that the Langmuir model is better to describe the adsorption of dyes on the hybrid material. The maximum adsorption capacity was 484 and 771 mg/g for MO and MB, respectively.