Electrochemical treatment of bisphenol-A using response surface methodology

Enhanced biodegradation of endocrine disruptor bisphenol A by food waste composting without bioaugmentation: Analysis of bacterial communities and their relative abundances

Composting with food waste was assessed for its efficacy in decontaminating Bisphenol A (BPA). In a BPA-treated compost pile, the initial concentration of BPA 847 mg kg-1 fell to 6.3 mg kg-1 (99% reduction) over a 45-day composting period. The biodegradation rate was at its highest when bacterial activity peaked in the mesophilic and thermophilic phases. The average rate of total biodegradation was 18.68 mg kg-1 day-1. Standard methods were used to assess physicochemical parameters of the compost matrix and gas chromatography combined with mass spectrometry (GC/MS) was used to identify BPA intermediates. Next-generation sequencing (NGS) was used to detect BPA degraders and the diverse bacterial communities involved in BPA decomposition. These communities were found consist of 12 phyla and 21 genera during the composting process and were most diversified during the maturation phase. Three dominant phyla, Firmicutes, Pseudomonadota, and Bacteroidetes, along with Lactobacillus, Proteus, Bacillus, and Pseudomonas were found to be the most responsible for BPA degradation. Different bacterial communities were found to be involved in the food waste compost biodegradation of BPA at different stages of the composting process. In conclusion, food waste composting can effectively remove BPA, resulting in a safe product. These findings might be used to expand bioremediation technologies to apply to a wide range of pollutants.

Artificial intelligence techniques in electrochemical processes for water and wastewater treatment: a review

In recent years, artificial intelligence (AI) techniques have been recognized as powerful techniques. In this work, AI techniques such as artificial neural networks (ANNs), support vector machines (SVM), adaptive neuro-fuzzy inference system (ANFIS), genetic algorithms (GA), and particle swarm optimization (PSO), used in water and wastewater treatment processes, are reviewed. This paper describes applications of the mentioned AI techniques for the modelling and optimization of electrochemical processes for water and wastewater treatment processes. Most research in the mentioned scope of study consists of electrooxidation, electrocoagulation, electro-Fenton, and electrodialysis. Also, ANNs have been the most frequent technique used for modelling and optimization of these processes. It was shown that most of the AI models have been built with a relatively low number of samples (< 150) in data sets. This points out the importance of reliability and robustness of the AI models derived from these techniques. We show how to improve the performance and reduce the uncertainty of these developed black-box data-driven models. From the perspectives of both experiment and theory, this review demonstrates how AI techniques can be effectively adapted to electrochemical processes for water and wastewater treatment to model and optimize these processes.

Supplementary Information

The online version contains supplementary material available at 10.1007/s40201-022-00835-w.

B,N-decorated carbocatalyst based on Fe-MOF/BN as an efficient peroxymonosulfate activator for bisphenol A degradation

A novel B,N-decorated carbocatalyst (Fe@BPC-XBN) for peroxymonosulfate (PMS) activation was prepared by a simple pyrolysis method using the iron-based metal organic frameworks (Fe-MOF), boric acid and boron nitride (BN) as precursors. Fe@BPC-20BN removed 93.3% of bisphenol A (BPA) in 90 min compared to 64.9%, 82.1% and 83.5% with Fe@PC, Fe@BPC and Fe@PC-20BN, respectively, with 0.15 g/L catalyst and 1 mM PMS at initial pH of 7. The solo B-doping with boron acid on the Fe-MOF derived porous carbon enhanced its catalytic capacity; moreover, B, N co-doping with BN and boron acid as precursors further promoted the catalytic performance. The addition of BN not only provided more B, N catalytic centers but also improved the stability of the carbocatalyst. In addition, hydroxyl radicals, sulfate radicals, superoxide radicals, and singlet oxygen species were involved in the degradation of BPA. Fe species, -BCO₂/-BC₂O, pyridinic N, and pyrrolic N groups on the carbon matrix played the important roles in the BPA degradation. The outstanding catalytic performance of Fe@BPC-20BN could be attributed to the synergistic effects between iron nanoparticles and the B/N codoped carbon matrix. This study gives new insights into the design and preparation of high-efficient B,N-decorated carbocatalysts for environmental remediation.

A comprehensive review on current technologies for removal of endocrine disrupting chemicals from wastewaters

In the recent years, endocrine disrupting compounds (EDCs) has received increasing attention due to their significant toxic effects on human beings and wildlife by affecting their endocrine systems. As an important group of emerging pollutant, EDCs have been detected in various aquatic environments, including surface waters, groundwater, wastewater, runoff, and landfill leachates. Their removal from water resources has also been an emerging concern considering growing population as well as reducing access to fresh water resources. EDC removal from wastewaters is highly dependent on physicochemical properties of the given EDCs present in each wastewater types as well as various aquatic environments. Due to chemical, physical and physicochemical diversities in these parameters, variety of technologies consisting of physical, biological, electrochemical, and chemical processes have been developed for their removal. This review highlights that the effectiveness of EDC removal is highly dependent of selecting the appropriate technology; which decision is made upon a full wastewater chemical characterization. This review aims to provide a comprehensive perspective about all the current technologies used for EDCs removal from various aquatic matrices along with rising challenges such as the antimicrobial resistance gene transfer during EDC treatment.

Recent progress on ultrasound-assisted electrochemical processes: A review on mechanism, reactor strategies, and applications for wastewater treatment

The electrochemical advanced oxidation processes (EAOPs) have received significant attention among the many other water and wastewater treatment technologies. However, achieving a desirable removal effect with a single technique is frequently difficult. Therefore, the integration of ultrasound technique with other processes such as electrocoagulation, electro-Fenton, and electrooxidation is a critical way to achieve effective organic pollutants decomposition from wastewater. This review paper is focused on ultrasound-assisted electrochemical (US/electrochemical) processes, so-called sonoelectrochemical processes of various organic pollutants. Emphasis was given to recently published articles for discussing the results and trends in this research area. The use of ultrasound and integration with electrochemical processes has a synergistic impact owing to the physical and chemical consequences of cavitation, resulting in enhancing the mineralization of organic pollutants. Various types of sonoelectrochemical reactors (batch and continuous) employed in the US/electrochemical processes were reviewed. In addition, the strategies to avoid passivation, enhanced generation of reactive oxygen species, and mixing effect are reviewed. Finally, concluding remarks and future perspectives on this research topic are also explored and recommended.

Application of lead oxide electrodes in wastewater treatment: A review

Electrochemical oxidation (EO) based on hydroxyl radicals (·OH) generated on lead dioxide has become a typical advanced oxidation process (AOP). Titanium-based lead dioxide electrodes (PbO₂/Ti) play an increasingly important role in EO. To further improve the efficiency, the structure and properties of the lead dioxide active surface layer can be modified by doping transition metals, rare earth metals, nonmetals, etc. Here, we compare the common preparation methods of lead dioxide. The EO performance of lead dioxide in wastewater containing dyes, pesticides, drugs, landfill leachate, coal, petrochemicals, etc., is discussed along with their suitable operating conditions. Finally, the factors influencing the contaminant removal kinetics on lead dioxide are systematically analysed.

Persulfate activation by Fe(III) with bioelectricity at acidic and near-neutral pH regimes: Homogeneous versus heterogeneous mechanism

The combination of persulfate (PS) activation by iron ions with electrochemical process (electro/Fe³⁺/PS) is a promising advanced oxidation process. However, almost all these systems were performed in an unbuffered solution and actually under acidic pH condition, with the electricity being frequently supplied by external power. Considering the high buffering capacity of wastewater and energy saving, peroxydisulfate (PDS) activation by Fe(III) species with bioelectricity provided by microbial fuel cell (MFC) for bisphenol A (BPA) oxidation was investigated at fixed near-neutral pH as well as acidic pH. The results indicate that 90.8% of BPA could be removed at pH 2.5. Though the iron existed in the form of precipitate, BPA could still be efficiently removed at pH 6.0. The precipitate formed in the system at pH 6.0 was identified as the amorphous iron oxyhydroxides. Sulfate radicals in the bulk solution and that adsorbed on the precipitate were the dominant reactive species responsible for the oxidation of BPA in the homogeneous and heterogeneous MFC/Fe(III)/PDS processes, respectively. The mechanisms of BPA degradation at both pH values were proposed via EPR and quenching tests as well as XPS analysis. The effects of operating parameters, the mineralization, the mineralization current efficiency and energy consumption were also explored.

Consolidated vs new advanced treatment methods for the removal of contaminants of emerging concern from urban wastewater

Urban wastewater treatment plants (WWTPs) are among the main anthropogenic sources for the release of contaminants of emerging concern (CECs) into the environment, which can result in toxic and adverse effects on aquatic organisms and consequently on humans. Unfortunately, WWTPs are not designed to remove CECs and secondary (e.g., conventional activated sludge process, CAS) and tertiary (such as filtration and disinfection) treatments are not effective in the removal of most CECs entering WWTP. Accordingly, several advanced treatment methods have been investigated for the removal of CECs from wastewater, including consolidated (namely, activated carbon (AC) adsorption, ozonation and membranes) and new (such as advanced oxidation processes (AOPs)) processes/technologies. This review paper gathers the efforts of a group of international experts, members of the NEREUS COST Action ES1403 who for three years have been constructively discussing the state of the art and the best available technologies for the advanced treatment of urban wastewater. In particular, this work critically reviews the papers available in scientific literature on consolidated (ozonation, AC and membranes) and new advanced treatment methods (mainly AOPs) to analyse: (i) their efficiency in the removal of CECs from wastewater, (ii) advantages and drawbacks, (iii) possible obstacles to the application of AOPs, (iv) technological limitations and mid to long-term perspectives for the application of heterogeneous processes, and (v) a technical and economic comparison among the different processes/technologies.

Efficient activation of persulfate by Fe3O4@β-cyclodextrin nanocomposite for removal of bisphenol A

Experimental studies were conducted to investigate the degradation of bisphenol A (BPA) by using persulfate (PS) as the oxidant and Fe₃O₄@β-cyclodextrin (β-CD) nanocomposite as a heterogeneous activator. The catalytic activity was evaluated in consideration of the effect of various parameters, such as pH value, PS concentration and Fe₃O₄@β-CD load. The results showed that 100% removal of BPA was gained at pH 3.0 with 5 mM PS, 1.0 g L⁻¹ Fe₃O₄@β-CD, and 0.1 mM BPA in 120 min. Further, the catalytic activity of Fe₃O₄@β-CD nanocomposite was observed as much higher when compared with Fe₃O₄ nanoparticles alone. The sulfate and hydroxyl radicals referred to in the Fe₃O₄@β-CD/PS system were determined as the reactive species responsible for the degradation of BPA by radical quenching and electron spin resonance (ESR) tests. In addition, the catalyst also possessed with accepted reusability and stability. On the basis of the results of the effect of chloride ions (Cl⁻), β-CD was found to play a crucial role in reducing interference from Cl⁻ ions, and lead to achieve higher removal efficiency for BPA in Fe₃O₄@β-CD/PS system. A possible mechanistic process of BPA degradation was proposed according to the identified intermediates by gas chromatography-mass spectroscopy (GC-MS).

Persulfate (PS), the most commonly used activator for in situ chemical oxidation (ISCO), could couple with Fe₃O₄@β-CD for effectively degrading BPA.

Electrodegradation of the Acid Green 28 dye using Ti/β-PbO2 and Ti-Pt/β-PbO2 anodes

The statistical Response Surface Methodology (RSM) is applied to investigate the effect of different parameters (current density, j, NaCl concentration, [NaCl], pH, and temperature, θ) and their interactions on the electrochemical degradation of the Acid Green (AG) 28 dye using a Ti/β-PbO2 or Ti-Pt/β-PbO2 anode in a filter-press reactor. LC/MS is employed to identify intermediate compounds. For both anodes, the best experimental conditions are j = 50 mA cm(-2), [NaCl] = 1.5 g L(-1), pH = 5, and θ = 25 °C. After 3 h of electrolysis, a dye solution treated under these conditions presents the following parameters: electric charge per unit volume of the electrolyzed solution required for 90% decolorization (Q(90)) of 0.34-0.37 A h L(-1), %COD removal of ∼100%, specific energy consumption of 18-20 kW h m(-3), and %TOC removal of 32-33%. No loss of the β-PbO2 film is observed during all the experiments. The β-PbO2 films present excellent stability for solutions with pH ≥ 5 ([Pb(2+)] < 0.5 mg L(-1)). Chloroform is the only volatile organic halo compound present in the treated solution under those optimized conditions. Hydroxylated anthraquinone derivatives, aromatic chloramines, and naphthoquinones are formed during the electrolyses. The Ti/β-PbO2 and Ti-Pt/β-PbO2 anodes show significantly better performance than a commercial DSA anode for the electrochemical degradation of the AG 28 dye. The Ti/β-PbO2 anode, prepared as described in this work, is an excellent option for the treatment of textile effluents because of its low cost of fabrication and good performance.

In situ reactive oxygen species production for tertiary wastewater treatment

The goal of this research was to develop a new approach for tertiary water treatment, particularly disinfection and removal of refractory organic compounds, without adding any chemical. Hydrogen peroxide can indeed be produced from dissolved oxygen owing to electrochemical processes. Using various current intensities (1.0 to 4.0 A), it was possible to in situ produce relatively high concentration of H2O2 with a specific production rate of 0.05 × 10(-5) M/min/A. Likewise, by using ultraviolet-visible absorption spectroscopy method, it was shown that other reactive oxygen species (ROS) including HO(*) radical and O3 could be simultaneously formed during electrolysis. The ROS concentration passed from 0.45 × 10(-5) M after 20 min of electrolysis to a concentration of 2.87 × 10(-5) M after 100 min of electrolysis. The disinfection and the organic matter removal were relatively high during the tertiary treatment of municipal and domestic wastewaters. More than 90 % of organic compounds (chemical oxygen demand) can be removed, whereas 99 % of faecal coliform abatement can be reached. Likewise, the process was also effective in removing turbidity (more than 90 % of turbidity was removed) so that the effluent became more and more transparent.