Detection of cocrystal formation based on binary phase diagrams using thermal analysis

Binary Mixtures of Meloxicam and L-Tartaric Acid for Oral Bioavailability Modulation of Pharmaceutical Dosage Forms

Binary mixtures of active pharmaceutical ingredients (API) are researched to improve the oral bioavailability of pharmaceutical dosage forms. The purpose of this study was to obtain mixtures of meloxicam and L-tartaric acid because tartaric acid improves intestinal absorption and meloxicam is more soluble in a weakly basic environment. The mixtures in the 0-1 molar fraction range, obtained from solvent-assisted mechanosynthesis, were investigated by differential scanning calorimetry (DSC), Fourier Transform Infrared (FTIR) spectroscopy, Fourier Transform Raman spectroscopy (FT-Raman), X-ray powder diffraction (XRD) and solubility tests. The physicochemical characteristics of the compounds obtained from DSC data reveal, for the first time, the formation of a co-crystal at meloxicam molar fraction of 0.5. FTIR spectroscopy data show the existence of hydrogen bonds between the co-crystal components meloxicam and L-tartaric acid. FT-Raman spectroscopy was used complementary with FT-IR spectroscopy to analyze the pure APIs and their mixtures, to emphasize the appearance/disappearance and the shifts of the position/intensity of vibrational bands, following the formation of hydrogen-bonded structures or van der Waals interactions, and to especially monitor the crystal lattice vibrations below 400 cm-1. The experimental results obtained by X-ray powder diffraction confirmed the formation of the co-crystal by the loss and, respectively, the apparition of peaks from the single components in the co-crystal diffractogram. The solubility tests showed that the co-crystal product has a lower aqueous solubility due to the acidic character of the other component, tartaric acid. However, when the solubility tests were performed in buffer solution of pH 7.4, the solubility of meloxicam from the co-crystal mixture was increased by 57% compared to that of pure meloxicam. In conclusion, the studied API mixtures may be considered potential biomaterials for improved drug release molecular solids.

Development of favipiravir dry powders for intranasal delivery: An integrated cocrystal and particle engineering approach via spray freeze drying

The therapeutic potential of pharmaceutical cocrystals in intranasal applications remains largely unexplored despite progressive advancements in cocrystal research. We present the application of spray freeze drying (SFD) in successful fabrication of a favipiravir-pyridinecarboxamide cocrystal nasal powder formulation for potential treatment of broad-spectrum antiviral infections. Preliminary screening via mechanochemistry revealed that favipiravir (FAV) can cocrystallize with isonicotinamide (INA), but not nicotinamide (NCT) and picolinamide (PIC) notwithstanding their structural similarity. The cocrystal formation was characterized by differential scanning calorimetry, Fourier-transform infrared spectroscopy, and unit cell determination through Rietveld refinement of powder X-ray analysis. FAV-INA crystalized in a monoclinic space group P21/c with a unit cell volume of 1223.54(3) Å3, accommodating one FAV molecule and one INA molecule in the asymmetric unit. The cocrystal was further reproduced as intranasal dry powders by SFD, of which the morphology, particle size, in vitro drug release, and nasal deposition were assessed. The non-porous flake shaped FAV-INA powders exhibited a mean particle size of 19.79 ± 2.61 μm, rendering its suitability for intranasal delivery. Compared with raw FAV, FAV-INA displayed a 3-fold higher cumulative fraction of drug permeated in Franz diffusion cells at 45 min (p = 0.001). Dose fraction of FAV-INA deposited in the nasal fraction of a customized 3D-printed nasal cast reached over 80 %, whereas the fine particle fraction remained below 6 % at a flow rate of 15 L/min, suggesting high nasal deposition whilst minimal lung deposition. FAV-INA was safe in RPMI 2650 nasal and SH-SY5Y neuroblastoma cells without any in vitro cytotoxicity observed. This study demonstrated that combining the merits of cocrystallization and particle engineering via SFD can propel the development of advanced dry powder formulations for intranasal drug delivery.

A New Look at the Mechanism of Cocrystal Formation and Coformers Exchange in Processes Forced by Mechanical and/or Thermal Stimuli - ex situ and in situ Studies of Low-Melting Eutectic Mixtures

Three different devices: ball mill, hot stage melting, and magic angle spinning (MAS) NMR rotor were used for the preparation of ethenzamide (ET) cocrystals with glutaric acid (GLU), ethylmalonic acid (EMA) and maleic acid (MAL) as coformers. In each case, well-defined binary systems (ET:EMA, ET:GLU, ET:MAL) were obtained. The common features of the two solvent free methods of cocrystal formation (grinding, melting) are presented on the basis of arguments obtained by solid state NMR spectroscopy. Thermal analysis (Differential Scanning Calorimetry) proved that the eutectic phase arises over a wide range of molar ratios of components for each of the binary systems. NMR techniques, supported by theoretical calculations, allowed to provide details about the pathway of the reaction mechanism with atomic accuracy. It was found that the formation of ET cocrystals is a complex process that requires five steps. Each step has been recognized and described. Variable temperature 1D and 2D MAS NMR experiments allowed to track physicochemical processes taking place in a molten state. Moreover, it was found that in a multicomponent mixture consisting of all four components, ET, EMA, GLU, and MAL, ET in the molten phase behaves as a specific selector choosing only one partner to form binary cocrystals according to energy preferences. The process of exchange of coformers in binary systems during grinding, melting, and NMR measurements is described. The stabilization energies (Estab ) and molecular electrostatic potential (MEP) maps computed for the cocrystals under discussion and their individual components rationalize the selection rules and explain the relationships between individual species.

Effect of stoichiometry upon the characteristics of quercetin-arginine cocrystals formulated through solution crystallization

OBJECTIVE

The aim of this study is to demonstrate the effect of stoichiometry upon characteristics of quercetin-arginine (QCT-Arg) cocrystals.

SIGNIFICANCE

Quercetin (QCT) is a most abundant flavonoid in vegetables and fruits and has been widely used as an antioxidant. However, its oral bioavailability remains low due to poor aqueous solubility. We illustrate that QCT-Arg cocrystals formulated through an optimized stoichiometry can be a useful approach for its solubilization.

METHOD

Cocrystals were prepared using solvent evaporation method. Characterizations were performed through microscopic, spectroscopic, and thermal techniques. The stoichiometry was confirmed from the binary phase diagram which was prepared using thermograms derived from differential scanning calorimetric experiments.

RESULT

Cocrystal formation was accompanied by the conversion of isotropic phase into anisotropic one. Thread-like cocrystals were formed, regardless of QCT-Arg stoichiometry and solvent's polarity. Spectral analyses suggested that cocrystal structure was held together by hydrogen bonding between QCT and Arg. We ruled out the existence of eutectic mixture based on the observation of two eutectic points in the binary phase diagram.

CONCLUSION

Morphology of cocrystals remained unaffected by the solvent type, stoichiometry and the presence of surfactant. We noticed that the cocrystals could improve the aqueous solubility of QCT.

In Vitro and In Vivo Evaluation of Dark Chocolate as Age-appropriate Oral Matrix

Swallowing difficulties encountered by geriatric patients who undergo polypharmacy represent a significant challenge that hampers patient compliance and therapeutic management. As an appealing and sensory-pleasing, chocolate-based formulations have emerged as a potential alternative oral dosage form suitable for both the elderly and paediatric populations. However, the extent to which the incorporation of drugs into a chocolate matrix affects their oral availability remains unclear. Therefore, the objective of this investigation was to explore the in vitro and in vivo performance of an ibuprofen-based chocolate dosage form. A matrix based on dark chocolate and the model drug was prepared at two distinct temperatures: 50 and 80 °C. In vitro release studies revealed that ibuprofen formulated through co-melting at 80 °C exhibited a statistically significant slower drug release (p < 0.05) compared to formulations prepared at 50 °C in both FaSSGF (fasted-state simulated gastric fluid) and lipolysis media. The enzymatic degradation of chocolate in the presence of lipase accelerated in vitro ibuprofen release from chocolate matrices. To delve deeper into the bioavailability of ibuprofen within the chocolate formulations, we conducted an in vivo assessment, comparing the pharmacokinetic profiles of ibuprofen in its conventional suspension form with our chocolate-based dosage forms. A notable drop (p < 0.05) in the maximum serum concentration of ibuprofen when incorporated into co-melted or solid-suspension chocolate matrices. However, no significant differences in plasma exposure were observed between the two formulations. These findings shed a light on the potential of chocolate to extend of ibuprofen when integrated into various chocolate matrices, showcasing the potential held by these innovative formulations.

Study on Sulfamethoxazole-Piperazine Salt: A Mechanistic Insight into Simultaneous Improvement of Physicochemical Properties

Multidrug salts represent more than one drug in a crystal lattice and thus could be used to deliver multiple drugs in a single dose. It showcases unique physicochemical properties in comparison to individual components, which could lead to improved efficacy and therapeutic synergism. This study presents the preparation and scale-up of sulfamethoxazole-piperazine salt, which has been thoroughly characterized by X-ray diffraction and thermal and spectroscopic analyses. A detailed mechanistic study investigates the impact of piperazine on the microenvironmental pH of the salt and its effect on the speciation profile, solubility, dissolution, and diffusion profile. Also, the improvement in the physicochemical properties of sulfamethoxazole due to the formation of salt was explored with lattice energy contributions. A greater ionization of sulfamethoxazole (due to pH changes contributed by piperazine) and lesser lattice energy of sulfamethoxazole-piperazine contributed to improved solubility, dissolution, and permeability. Moreover, the prepared salt addresses the stability issues of piperazine and exhibits good stability behavior under accelerated stability conditions. Due to the improvement of physicochemical properties, the sulfamethoxazole-piperazine salt demonstrates better pharmacokinetic parameters in comparison to sulfamethoxazole and provides a strong suggestion for the reduction of dose. The following study suggests that multidrug salts can concurrently enhance the physicochemical properties of drugs and present themselves as improved fixed-dose combinations.

Norfloxacin Cocrystals: Mechanochemical Synthesis and Scale-up Viability Through Solubility Studies

Cocrystals are recognized as one of the most efficient approaches to improve aqueous solubility of Biopharmaceutical Classification System, BCS, classes II and IV drugs. Cocrystal discovery and the establishment of experimental conditions suitable for scale-up purposes are some of the main challenges in cocrystal investigation. In this work, the investigation of mechanochemical synthesis of norfloxacin cocrystals with picolinic and isonicotinic acids is performed, leading to the discovery of two new cocrystals of this important BCS class IV antibiotic, which were characterized through thermal, spectral and diffractometric analysis. Norfloxacin apparent aqueous solubility using the cocrystals is also presented, with higher values being obtained for all the investigated systems when compared to the pure drug. Norfloxacin has 3 polymorphs and several solvents/hydrates, which represents a challenge for obtaining pure cocrystal forms from solvent crystallization. This challenge was successfully overcome in this work, as experimental conditions to obtain the pure cocrystals (the new ones and also norfloxacin-nicotinic acid and norfloxacin-saccharin) were established using Crystal16 equipment. This is a crucial step to envisage future scale-up procedures and therefore a valuable information for the pharmaceutical industry.

Structural diversity of cocrystals formed from acridine and two isomers of hydroxybenzaldehyde: 3-hydroxybenzaldehyde and 4-hydroxybenzaldehyde

Cocrystals formed from acridine and two isomers of hydroxybenzaldehyde: 3-hydroxybenzaldehyde (1) and 4-hydroxybenzaldehyde (2) were synthesized and structurally characterized. Single-crystal X-ray diffraction measurements show that compound 1 crystallizes in the triclinic P1̄ space group, whereas compound 2 crystallizes in the monoclinic P2₁/n space group. In the crystals of title compounds, the molecules interact via O-H⋯N and C-H⋯O hydrogen bonds, and C-H⋯π and π-π interactions. DCS/TG measurements indicate that compound 1 melts at a lower temperature than the separate cocrystal coformers, whereas compound 2 melts at a higher temperature than acridine but at a lower temperature than 4-hydroxybenzaldehyde. The FTIR measurements reveal that the band attributed to the stretching vibrations of the hydroxyl group of hydroxybenzaldehyde disappeared, but several bands appeared in the range of 3000-2000 cm^-1.

Synthesis of the first remdesivir cocrystal: design, characterization, and therapeutic potential for pulmonary delivery

While cocrystal engineering is an emerging formulation strategy to overcome drug delivery challenges, its therapeutic potential in non-oral applications remains not thoroughly explored. We herein report for the first time the successful synthesis of a cocrystal for remdesivir (RDV), an antiviral drug with broad-spectrum activities against RNA viruses. The RDV cocrystal was prepared with salicylic acid (SA) via combined liquid-assisted grinding (LAG) and thermal annealing. Formation of RDV-SA was found to be a thermally activated process, where annealing at high temperature after grinding was a prerequisite to facilitate the cocrystal growth from an amorphous intermediate, rendering it elusive under ambient preparing conditions. Through powder X-ray analysis with Rietveld refinement, the three-dimensional molecular structure of RDV-SA was resolved. The thermally annealed RDV-SA produced by LAG crystalized in a non-centrosymmetric monoclinic space group P2₁ with a unit cell volume of 1826.53(17) ų, accommodating one pair of RDV and SA molecules in the asymmetric unit. The cocrystal formation was also characterized by differential scanning calorimetry, solid-state nuclear magnetic resonance, and Fourier-transform infrared spectroscopy. RDV-SA was further developed as inhaled dry powders by spray drying for potential COVID-19 therapy. The optimized RDV-SA dry powders exhibited a mass median aerodynamic diameter of 4.33 ± 0.2 μm and fine particle fraction of 41.39 ± 4.25 %, indicating the suitability for pulmonary delivery. Compared with the raw RDV, RDV-SA displayed a 15.43-fold higher fraction of release in simulated lung fluid at 120 min (p =0.0003). RDV-SA was safe in A549 cells without any in vitro cytotoxicity observed in the RDV concentration from 0.05 to 10 µM.

Solid–Liquid Equilibrium in Co-Amorphous Systems: Experiment and Prediction

In this work, the solid–liquid equilibrium (SLE) of four binary systems combining two active pharmaceutical ingredients (APIs) capable of forming co-amorphous systems (CAMs) was investigated. The binary systems studied were naproxen-indomethacin, naproxen-ibuprofen, naproxen-probucol, and indomethacin-paracetamol. The SLE was experimentally determined by differential scanning calorimetry. The thermograms obtained revealed that all binary mixtures investigated form eutectic systems. Melting of the initial binary crystalline mixtures and subsequent quenching lead to the formation of CAM for all binary systems and most of the compositions studied. The experimentally obtained liquidus and eutectic temperatures were compared to theoretical predictions using the perturbed-chain statistical associating fluid theory (PC-SAFT) equation of state and conductor-like screening model for real solvents (COSMO-RS), as implemented in the Amsterdam Modeling Suite (COSMO-RS-AMS). On the basis of the obtained results, the ability of these models to predict the phase diagrams for the investigated API–API binary systems was evaluated. Furthermore, the glass transition temperature (Tg) of naproxen (NAP), a compound with a high tendency to recrystallize, whose literature values are considerably scattered, was newly determined by measuring and modeling the Tg values of binary mixtures in which amorphous NAP was stabilized. Based on this analysis, erroneous literature values were identified.

Melt Crystallization of Celecoxib-Carbamazepine Cocrystals with the Synchronized Release of Drugs

PURPOSE

The fixed-dose combination drug products have been increasingly used to treat some complex diseases. A cocrystal containing two therapeutic components, named as a drug-drug cocrystal, is an ideal solid form to formulate as a fixed-dose combination product. The aim of the study is to prepare celecoxib-carbamazepine (CEL-CBZ) cocrystals by melt crystallization to achieve the synchronized release of drugs.

METHOD

The crystal structure of the CEL-CBZ cocrystal was determined from the cocrystals harvested from melt by single crystal X-ray diffraction. The binary phase diagram and crystal growth kinetics of the CEL-CBZ cocrystal from melt were studied to optimize the process parameters of hot-melt extrusion for manufacturing large-scale cocrystals. The intrinsic dissolution rate studies were conducted to compare the dissolution profiles of drugs in the cocrystal and their individual forms.

RESULT

The CEL-CBZ cocrystal crystallized in the triclinic space group with one CEL and one CBZ molecule in the asymmetric unit. The crystallization of CEL-CBZ cocrystals were observed both in the supercooled liquid and glassy state. The formation of drug-drug cocrystals significantly alter the intrinsic dissolution rates of the parent drugs to favor the synchronized release.

CONCLUSION

Melt crystallization is an alternative, efficient and eco-friendly approach for preparing drug-drug cocrystals on a large scale. The synchronized drug release by drug-drug cocrystals can be used to modulate the release profiles of parent drugs in the fixed-dose combination products.

Exploration and characterization of a novel cocrystal hydrate consisting of captopril, an amino acid-derived drug

We found a novel cocrystal consisting of captopril, which is an amino acid-derived drug having a thiol group, and l-proline by using nano-spot-screening with LF-Raman. This cocrystal hydrate showed high hygroscopicity resulted from changes in intermolecular interactions.

Improving physicochemical properties and pharmacological activities of ternary co-amorphous systems

The formation of co-amorphous by combining low molecular weight compounds with drugs is a relatively new technology in the pharmaceutical field, which can significantly improve the solubility, dissolution, and stability of poorly water-soluble drugs. However, in our previous studies, the binary co-amorphous system of andrographolide-oxymatrine (AP-OMT) was found to have obvious recrystallization and poor dissolution behavior. Therefore, in this study, we designed three stable ternary co-amorphous systems to improve the physicochemical properties of the binary co-amorphous system of AP-OMT. The ternary co-amorphous systems were prepared with AP, OMT, and trans-cinnamic acid (CA), p-hydroxycinnamic acid (pHCA), or ferulic acid (FA). Intermolecular hydrogen bonds were confirmed by spectroscopy and molecular dynamics simulation. Solubility studies showed that the solubility of the ternary co-amorphous systems of AP-OMT-CA/pHCA/FA was significantly increased compared with that of crystalline AP. Dissolution experiments suggested that the ternary co-amorphous systems of AP-OMT-CA/pHCA/FA exhibited better dissolution behavior without significant recrystallization compared to the binary co-amorphous AP-OMT. The stability study confirmed that the ternary co-amorphous system of AP-OMT-CA/pHCA/FA maintained good physical stability in the long term for 18 months. In addition, pharmacological experiments revealed that the ternary co-amorphous systems of AP-OMT-CA/pHCA/FA have an excellent safety profile and its anti-Alzheimer's disease effects are significantly improved compared to that of the binary co-amorphous systems of AP-OMT. Moreover, this study also found that reducing the pKa value of low molecular weight co-formers would affect the intermolecular interactions and improve the solubility of drugs in the ternary co-amorphous systems. In conclusion, we have successfully prepared ternary co-amorphous systems of AP-OMT-CA/pHCA/FA by amorphization technique, which improves the physicochemical properties of the binary co-amorphous systems of AP-OMT and anti-Alzheimer's disease activity in the Caenorhabditis elegans model. The mechanism for the influence of the pKa value of the co-formers on the physicochemical properties of the ternary co-amorphous system was preliminarily explored, providing theoretical guidance for the development of the ternary co-amorphous system.

Mechanical Activation by Ball Milling as a Strategy to Prepare Highly Soluble Pharmaceutical Formulations in the Form of Co-Amorphous, Co-Crystals, or Polymorphs

Almost half of orally administered active pharmaceutical ingredients (APIs) have low solubility, which affects their bioavailability. In the last two decades, several alternatives have been proposed to modify the crystalline structure of APIs to improve their solubility; these strategies consist of inducing supramolecular structural changes in the active pharmaceutical ingredients, such as the amorphization and preparation of co-crystals or polymorphs. Since many APIs are thermosensitive, non-thermal emerging alternative techniques, such as mechanical activation by milling, have become increasingly common as a preparation method for drug formulations. This review summarizes the recent research in preparing pharmaceutical formulations (co-amorphous, co-crystals, and polymorphs) through ball milling to enhance the physicochemical properties of active pharmaceutical ingredients. This report includes detailed experimental milling conditions (instrumentation, temperature, time, solvent, etc.), as well as solubility, bioavailability, structural, and thermal stability data. The results and description of characterization techniques to determine the structural modifications resulting from transforming a pure crystalline API into a co-crystal, polymorph, or co-amorphous system are presented. Additionally, the characterization methodologies and results of intermolecular interactions induced by mechanical activation are discussed to explain the properties of the pharmaceutical formulations obtained after the ball milling process.

Oxaliplatin-flavone pharmaceutical co-crystal-CN111205332A: patent spotlight

Co-crystallization is a technique for modifying physicochemical properties of pharmaceutical ingredients with an aim to enhance the therapeutic efficacy and subsequent reduction in toxicity. The patent describes the development of oxaliplatin co-crystals using flavonoids (baicalein and naringenin) via solvent volatilization technique with an objective to improve solubility and stability in GI tract and reduced side/toxic effects. The co-crystals were characterized via differential scanning calorimetry, thermogravimetric analysis, x-ray diffraction analysis. The co-crystals exhibited slow drug release, delayed hydrolysis, low cytotoxicity and enhanced therapeutic activity on human gastric adenocarcinoma cells. However, suitable solvent for co-crystal production, large scale production and regulatory challenges for continuous manufacturing of co-crystals must be addressed.

Dual Antimelanogenic Effect of Nicotinamide-Stabilized Phloretin Nanocrystals in Larval Zebrafish

Melanin is a kind of dark insoluble pigment that can cause pigmentation and free-radical clearance, inducing melasma, freckles, and chloasma, affecting the quality of life of patients. Due to poor water solubility and low safety, the absorption of poorly water-soluble drugs is limited by the hinderance of a skin barrier. Therefore, it is necessary to develop new, safe, and highly efficient drugs to improve their transdermal absorption efficiency and thus to inhibit the production of melanin. To address these issues, we developed a new nicotinamide (NIC)-stabilized phloretin nanocrystals (PHL-NCs). First, NC technology significantly increased the solubility of PHL. The in vitro release results indicated that at 6 h, the dissolution of the PHL-NIC-NCs was 101.39% ± 2.40% and of the PHL-NCs was 84.92% ± 4.30%, while that of the physical mixture of the two drugs was only 64.43% ± 0.02%. Second, NIC acted not only as a stabilizer to enlarge the storage time of PHL-NIC-NCs (improved to 10-day in vitro stability) but also as a melanin transfer inhibitor to inhibit melanin production. Finally, we verified the melanin inhibition effect of PHL-NIC-NCs evaluated by the zebrafish model. It showed that 0.38 mM/L PHL-NIC-NCs have a lower tyrosinase activity at 62.97% ± 0.52% and have less melanin at 36.57% ± 0.44%. The inhibition effect of PHL-NCs and PHL-NIC-NCs was stronger compared to the positive control arbutin. In conclusion, the combination of NIC and PHL achieves better inhibition of tyrosinase and inhibition of melanin production through synergism. This will provide a direction to the subsequent development of melanin-inhibiting drugs and the combined use of pharmaceutical agents.

Preparation and Physicochemical Characterizations of p-Methoxycinnamic acid – Succinic Acid Cocrystal by Solvent Evaporation Technique

Background: PMCA (p-Methoxycinnamic acid) is an active pharmaceutical ingredient derived from Kaempheria galanga L (known as kencur in Indonesia), which is poorly soluble in water. It can cause problems in the development of pharmaceutical dosage forms. Several methods have been carried out to increase the solubility of PMCA such as complex formation with β-cyclodextrin, or solid dispersion. The cocrystal formation method is a solubility enhancement method that has been developed recently. Aim: The aim of the study was the preparation and physicochemical characterization of PMCA co-crystal with succinic acid (SA) as its conformer by solvent evaporation technique. Methods: PMCA-SA cocrystal was made by the solvent evaporation method with a 1:1 molar ratio. Physicochemical characterization of PMCA and SA cocrystal was performed by differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD), and scanning electron microscope (SEM). Results: The DSC thermogram showed a decrease in the melting point of cocrystal compared to PMCA (173.55˚C), SA (187.55˚C), and its physical mixture (159.53˚C). The cocrystal thermogram displayed an endothermic peak at 158.46 ° C. Diffractogram of PMCA- SA cocrystal exhibited new diffraction peaks at an angle of 2θ = 21.92; 25.91 and 39.25˚ which was not found in the diffractogram of every single component nor its physical mixture. SEM photomicrograph showed PMCA-SA cocrystal as a rod-shaped crystal that had a different surface morphology and smaller size than the constituent materials. Conclusions: Based on the physicochemical characterization data above, it could be ascertained that PMCA-SA cocrystals had formed, these cocrystals were expected to increase the solubility of PMCA in water.

Sugar-induced self-assembly of curcumin-based polydopamine nanocapsules with high loading capacity for dual drug delivery

Many drug delivery carriers reported in the literature require multistep assembly or often have very low drug loading capacities. Here, we present a simple sugar-based strategy that feeds the increased interest in high-loading nanomedicine. The driving force of the supramolecular nanocapsule formation is the interaction between curcumin (CCM) and the monosaccharide fructose. Drug and sugar are simply mixed in an aqueous solution in an open vessel, followed by coating the nanocapsules with polydopamine (PDA) to maintain structural integrity. We show that nanocapsules can still be obtained when other drugs are added, producing dual-drug nanoparticles with sizes of around 150-200 nm and drug loading contents of around 90% depending on the thickness of the PDA shell. This concept is widely applicable for a broad variety of drugs, as long as the drug has similar polarities to CCM. The key to success is the interaction of CCM and the second drug as shown in computational studies. The drug was able to be released from the nanocapsule at a release rate that could be fine-tuned by adjusting the thickness of the PDA layer.

Levofloxacin Cocrystal/Salt with Phthalimide and Caffeic Acid as Promising Solid-State Approach to Improve Antimicrobial Efficiency

To overcome the issue of multidrug resistant (MDR) microbes, the exploration of ways to improve the antimicrobial efficiency of existing antibiotics is one of the promising approaches. In search of synthons with higher efficiency, in current investigations, cocrystal and amorphous salt of levofloxacin hemihydrate (LEV) were developed with phthalimide (PTH) and caffeic acid (CFA). New materials were characterized with the help of FT-IR, Raman spectroscopy, powder X-ray diffraction (PXRD), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Shifting, attenuation, appearance/disappearance and broadening of bands were observed in the FT-IR and Raman spectra of the materials as evidence of the required product. The PXRD diffraction pattern observed for LEV-PTH indicated cocrystal while halo diffractogram of LEV-CFA revealed amorphous nature. DSC/TG analysis confirmed the hydrated nature of the cocrystal/salt. The dissolution rate and antimicrobial activity against selected strains, K.pneumonia, E. coli and S. typhi of parent drug and the new material were compared. The zone of inhibition (ZI) observed for 5 µg LEV-PTH was 30.4 + 0.36 (K. pneumonia), 26.33 + 0.35 (E. coli) and 30.03 + 0.25 mm (S. typhi) while LEV-CFA salt (5 µg) against the same strains inhibited 33.96 ± 0.25, 31.66 ± 0.35 and 27.93 ± 0.40 mm, respectively. These novel formulations enhance the dissolution rate as well as antibacterial efficiency and are expected to be potent against MDR bacterial strains.

Crystal Structure, Solubility, and Pharmacokinetic Study on a Hesperetin Cocrystal with Piperine as Coformer

Hesperetin (HES) is a key biological active ingredient in citrus peels, and is one of the natural flavonoids that attract the attention of researchers due to its numerous therapeutic bioactivities that have been identified in vitro. As a bioenhancer, piperine (PIP) can effectively improve the absorption of insoluble drugs in vivo. In the present study, a cocrystal of HES and PIP was successfully obtained through solution crystallization. The single-crystal structure was illustrated and comprehensive characterization of the cocrystal was conducted. The cocrystal was formed by two drug molecules at a molar ratio of 1:1, which contained O–H–O hydrogen bonds between the carbonyl and ether oxygen of PIP and the phenolic hydroxyl group of HES. In addition, a solubility experiment was performed on powder cocrystal in simulated gastrointestinal fluid, and the result revealed that the cocrystal improves the dissolution behavior of HES compared with that of the pure substance. Furthermore, HES’s bioavailability in the cocrystal was six times higher than that of pristine drugs. These results may provide an efficient oral formulation for HES.

Thermal Methods Usage Features for Multicomponent Crystals Screening

Effectiveness of thermal methods, liquid-assisted grinding (LAG), and crystallization by slow evaporation technique for screening of multicomponent crystals of quinolones (nalidixic acid (NLD), oxolinic acid (OXL), norfloxacin (NFX), levofloxacin (LFX),...

Novel Co-crystals and Eutectics of Febuxostat: Characterization, Mechanism of Formation, and Improved Dissolution

Co-crystallization studies were undertaken to improve the solubility of a highly water-insoluble drug febuxostat (FXT), used in the treatment of gout and hyperuricemia. The selection of co-crystal former (CCF) molecules such as 1-hydroxy 2-naphthoic acid (1H-2NPH), 4-hydroxy benzoic acid (4-HBA), salicylic acid (SAC), 5-nitro isophthalic acid (5-NPH), isonicotinamide (ISNCT), and picolinamide (PICO) was based on the presence of complementary functional groups capable of forming hydrogen bond and the ΔpK_a difference between FXT and CCF. A liquid-assisted grinding (LAG) method was successfully employed for the rapid screening of various pharmaceutical adducts. These adducts were characterized based on their unique thermal (differential scanning calorimetry) and spectroscopic (Fourier transform infrared and Raman spectroscopy) profiles. Binary phase diagrams (BPD) were plotted to establish a relationship between the thermal events and adduct formed. Powder X-ray diffraction (PXRD) studies were carried out to confirm the formation of eutectic/co-crystal. Thermogravimetric analysis (TGA) was also performed for the novel co-crystals obtained. The propensity for strong homo-synthons over weak hetero-synthons and strong hetero-synthons over weak homo-synthons during supramolecular growth resulted in the formation of eutectics and co-crystals respectively. FXT:1H-2NPH (1), FXT:4-HBA (1), FXT:SAC (1, 2), and FXT:5-NPH (2-1) gave rise to pure eutectic systems, while FXT:ISNCT (2-1) and FXT:PICO (1) gave rise to novel co-crystals with characteristic DSC heating curves and PXRD pattern. Additionally, the impact of microenvironmental pH and microspeciation profile on the improved dissolution profile of the co-crystals was discussed. Graphical Abstract.

Preparation, characterization and evaluation of fenofibrate: benzoic acid cocrystals with enhanced pharmaceutical properties

Background

Cocrystallization process involved the understanding of interaction at molecular level between two molecules in context to their crystal packing and designing of new solids having improved physicochemical as well as pharmaceutical properties. In the present research, an attempt to increase the aqueous solubility and dissolution rate of a poorly aqueous soluble drug fenofibrate (FB) by formulation and evaluation of its cocrystals with benzoic acid (BZ) as a coformer was carried out.

Results

The drug and coformer were cocrystallized by using the solvent drop grinding method. For prediction of cocrystals formation, CSD (Cambridge Structure Database) software was utilized. Fourier transformation infrared spectroscopy (FTIR), X-ray diffraction (XRD) and differential scanning calorimetry (DSC) techniques were used for analysis of cocrystals. Albino rats were procured from institution as per IAEC guidelines for in vivo anti-hyperlipidaemic studies. The in vitro dissolution profile of cocrystals, pure drug, their physical mixture and marketed formulation was found to be 89%, 39%, 47% and 61%, respectively.

Conclusions

An enhanced anti-hyperlipidaemic activity of cocrystals was found compared to pure drug. The FB: BZ cocrystals also compared to the pure drug showed better dissolution profile and improved in vivo anti-hyperlipidaemic activity in rats. The study proved that cocrystals can promise to improve in vitro dissolution rate of poorly aqueous soluble drugs, which in turn can lead to better in vivo activities.

Deep eutectic systems: An overview of fundamental aspects, current understanding and drug delivery applications

The deep eutectic system (DES) is a relatively new concept in the field of drug delivery science. DES is a class of eutectic mixtures comprised of two or more components, with a eutectic point far below than the melting temperature of the pure components. The strong hydrogen bonding interactions between DES constituents are responsible for significant lowering of melting point in DES. A significant number of molecules cannot reach from drug discovery phase to drug development phase because of poor biopharmaceutical attributes, such as solubility and permeability. DES can be a novel alternative to overcome these issues. In last few years DESs have been widely used in different pharmaceutical and chemical processes. However, comprehensive information regarding their drug delivery potential is not available. This review deals with fundamental aspects such as types, preparation, thermodynamics, toxicity, biodegradability and their applications in the field of drug delivery. Current challenges, future prospects and translational aspects of DES as drug delivery system have also been discussed.

Zaltoprofen/4,4'-Bipyridine: A Case Study to Demonstrate the Potential of Differential Scanning Calorimetry (DSC) in the Pharmaceutical Field

The Zaltoprofen/4,4'-Bipyridine system gives rise to two co-crystals of different compositions both endowed - in water and in buffer solution at pH 4.5 - with considerably higher solubility and dissolution rate than the pure drug. The qualitative and quantitative analysis of the DSC measurements, carried out on samples made up of mixtures prepared according to different methodologies, allows us to elaborate and propose an accurate thermodynamic model that fully takes into account the qualitative aspects of the complex experimental framework and which provides quantitative predictions (reaction enthalpies and compositions of the co-crystals) in excellent agreement with the experimental results. Co-crystal formation and cocrystal compositions were confirmed by X-ray diffraction measurements as well as by FT-IR and NMR spectroscopy measurements. The quantitative processing of DSC measurements rationalizes and deepens the scientific aspects underlying the so-called Tammann's triangle and constitutes a model of general validity. The work shows that DSC has enormous potential, which however can be fully exploited only by paying adequate attention to the experimental aspects and the quantitative processing of the measurements.

Enhancing Dissolution Rate and Antibacterial Efficiency of Azithromycin through Drug-Drug Cocrystals with Paracetamol

Cocrystallization is a promising approach to alter physicochemical properties of active pharmaceutical ingredients (hereafter abbreviated as APIs) bearing poor profile. Nowadays pharmaceutical industries are focused on preparing drug-drug cocrystals of APIs that are often prescribed in combination therapies by physicians. Physicians normally prescribe antibiotic with an analgesic/antipyretic drug to combat several ailments in a better and more efficient way. In this work, azithromycin (AZT) and paracetamol (PCM) cocrystals were prepared in 1:1 molar ratio using slow solvent evaporation method. The cocrystals were characterized by Fourier transform infrared (FTIR), Raman spectroscopy, powder X-ray diffraction (PXRD), differential scanning calorimeter (DSC), thermo gravimetric analysis (TGA) and high-performance liquid chromatography (HPLC). Vibrational spectroscopy and DSC confirmed that both APIs interact physically and showed chemical compatibility, while PXRD pattern of the starting material and products revealed that cocrystal have in a unique crystalline phase. The degree of hydration was confirmed by TGA analysis and result indicates monohydrate cocrystal formation. The HPLC analysis confirmed equimolar ratio of AZT:PCM in the cocrystal. The in vitro dissolution rate, saturation solubility, and antimicrobial activity were evaluated for AZT dihydrate and the resulting cocrystals. The cocrystals exhibited better dissolution rate, solubility and enhanced biological activities.

An industrial perspective on co-crystals: Screening, identification and development of the less utilised solid form in drug discovery and development

Active pharmaceutical ingredients are commonly marketed as a solid form due to ease of transport, storage and administration. In the design of a drug formulation, the selection of the solid form is incredibly important and is traditionally based on what polymorphs, hydrates or salts are available for that compound. Co-crystals, another potential solid form available, are currently not as readily considered as a viable solid form for the development process. Even though co-crystals are gaining an ever-increasing level of interest within the pharmaceutical community, their acceptance and application is still not as standard as other solid forms such as the ubiquitous pharmaceutical salt and stabilised amorphous formulations. Presented in this chapter is information that would allow for a co-crystal screen to be planned and conducted as well as scaled up using solution and mechanochemistry based methods commonly employed in both the literature and industry. Also presented are methods for identifying the formation of a co-crystal using a variety of analytical techniques as well as the importance of confirming the formation of co-crystals from a legal perspective and demonstrating the legal precedent by looking at co-crystalline products already on the market. The benefits of co-crystals have been well established, and presented in this chapter are a selection of examples which best exemplify their potential. The goal of this chapter is to increase the understanding of co-crystals and how they may be successfully exploited in early stage development.

Injection-Molded Coamorphous Tablets: Analysis of Intermolecular Interaction and Crystallization Propensity

The processing steps involved in converting from a powder to a tablet entail numerous operations in a which the coamorphous system is recrystallized and dissociated easily. This research focused on (i) a single-step preparation of a coamorphous tablet during injection molding (IM) from the bulk powder, and (ii) a mechanistic characterization of the coamorphous formulation. We selected several organic acids [citric acid, succinic acid, tartaric acid, and malic acid] in an effort to compound with basic loratadine (a poorly water-soluble drug). Loratadine-acids coamorphous tablets were produced via an IM process, and the dissolution was more enhanced than in the pure loratadine amorphous. The interaction was analyzed by FT-IR and terahertz spectroscopies. Each tablet was stored at 40 °C/75%RH, and then XRD patterns were acquired at the desired timepoints. In summary, loratadine exhibited ionic interaction with each acid, and the physical stability of the coamorphous tablet was in proportion to the loratadine-acids interaction strength. Terahertz spectra detected the molecular mobility, which plays an important role in the crystallization propensity of a coamorphous system. This understanding offers a framework for robust coamorphous tablet formulation using the IM methodology.

Characterisation and fundamental insight into the formation of new solid state, multicomponent systems of propranolol

The physiochemical properties of acidic or basic active pharmaceutical ingredients (APIs) can be optimised by forming salts with different counterions. The aim of this work was to synthesise a novel salt of propranolol (PRO) using sebacic acid (SEBA) as the counterion and to gain mechanistic understanding of not only the salt formation, but also its eutectic phase formation with SEBA. Thermal analysis showed a solid-state reaction occurring between PRO and SEBA leading to the formation of dipropranolol sebacate (DPS) melting at app. 170 °C and the eutectic composed of DPS and SEBA melting at app. 103 °C, comprising 0.33 mol fraction of PRO as determined by the Tammann plot. X-ray diffraction and Fourier-transform infrared spectroscopy (FTIR) confirmed the identity of the new multicomponent phases of PRO. DPS can be conveniently obtained by heat-induced crystallisation, grinding and conventional solvent crystallisation. Detailed analysis by FTIR revealed H-bond interactions between DPS and SEBA at the inter-phase in the eutectic. Bravais, Friedel, Donnay and Harker crystal morphology coupled with full interaction maps analysis allowed to understand further the nature of interactions which led to formation of the eutectic phase. This work contributes to furthering research on multicomponent pharmaceutical systems to harness their full potential.

Identification of the Glimepiride and Metformin Hydrochloride Physical Interaction in Binary Systems

Glimepiride is often combined with metformin HCl as an oral antidiabetic in type II diabetes mellitus, which provides a complementary and synergistic effect with multiple targets for insulin secretion. Glimepiride includes class II of BCS, which solubility practically insoluble in water but high permeability, which will impact the drug's small bioavailability. In contrast, metformin HCl includes class III of BCS, which has a high solubility in water, but low permeability is absorbed approximately 50-60% in the digestive tract given orally. The co-crystallization method can be used to improve the glimepiride solubility properties and the permeability properties of metformin HCl by interrupting glimepiride with metformin HCl physically. This study aims to identify the physical interactions between glimepiride and metformin HCL using a thermal analysis of Differential Scanning Calorimetry (DSC) and then confirmed by a computational approach. Identifying the physical interactions between glimepiride and metformin HCL was carried out by plotting the melting points generated from the endothermic peaks of the DSC thermogram at various compositions versus the mole ratios of the two were further confirmed by the computational approach using PatchDock. The results of the phase diagram analysis of the binary system between glimepiride and metformin HCl show a congruent pattern, which indicates the formation of co-crystal or molecular compounds at a 1 : 1 mole ratio at 228°C. Computational approach results showed that the interaction between glimepiride and metformin HCl did not form new compounds but heterosinton formation that was stable in molecular dynamics simulations.

Multicomponent crystalline solid forms of aripiprazole produced via hot melt extrusion techniques: An exploratory study

Multicomponent crystalline solid forms (salts, cocrystals and eutectics) are a promising means of enhancing the dissolution behavior of poorly soluble drugs. The present study demonstrates the development of multicomponent solid forms of aripiprazole (ARP) prepared with succinic acid (SA) and nicotinamide (NA) as coformers using the hot melt extrusion (HME) technique. The HME-processed samples were characterized and analyzed using differential scanning calorimetry (DSC), hot stage microscopy (HSM), Fourier transform infrared (FTIR) spectroscopy, powder X-ray diffraction (PXRD) and scanning electron microscopy (SEM). The DSC and HSM analyses revealed a characteristic single melting temperature in the solid forms, which differed from the melting points of the individual components. The discernible changes in the FTIR (amide C=O stretching) and PXRD results for ARP-SA confirm the formation of new crystalline solid forms. In the case of ARP-NA, these changes were less prominent, without the appearance or disappearance of peaks, suggesting no change in the crystal lattice. The SEM images demonstrated morphological differences between the HME-processed samples and the individual parent components. The in vitro dissolution and microenvironment pH measurement studies revealed that ARP-SA showed a higher dissolution rate, which could be due to the acidic microenvironment pH imparted by the coformer. The observations of the present study demonstrate the applicability of the HME technique for the development of ARP multicomponent solid forms.

Novel cocrystals of itraconazole: Insights from phase diagrams, formation thermodynamics and solubility

In this work, the cocrystallization approach was applied to itraconazole (ITR), a very slightly soluble triazole antifungal drug, which led to the formation of two new solid forms of ITR with 4-aminobenzoic acid (4AmBA) and 4-hydroxybenzamide (4OHBZA). A thermodynamic analysis of the solid-liquid binary phase diagrams for the (ITR + 4AmBA) and (ITR + 4OHBZA) systems provided conclusive evidence of the cocrystal stoichiometry: 1:1 for the cocrystal with 4-aminobenzoic acid, and 1:2 for the cocrystal with 4-hydroxybenzamide. Powder X-Ray diffraction analysis confirmed the formation of two different polymorphic forms of the [ITR + 4OHBZA] (1:2) cocrystal obtained either through solution or melt crystallization. Cocrystal formation and polymorphic transition processes were investigated in detail by the DSC and HSM methods. The thermodynamic functions of cocrystal formation were estimated from the solubility of the cocrystals and the corresponding solubility of the pure compounds at different temperatures. The combination of ITR and 4OHBZA was found to be more favorable than the reaction between ITR and 4AmBA in terms of both Gibbs energy and enthalpy. The pH-solubility behavior of the cocrystals was investigated at different pH values using eutectic concentrations of the components and the cocrystal solubility advantage was estimated. It was found that the cocrystallization of itraconazole with 4OHBZA and 4AmBA can potentially increase the drug solubility at pH1.2 and 37 °C by 225 and 64 times, respectively. The cocrystal dissolution behavior in biorelevant media was analyzed in terms of C_max, σ_max parameters (the maximum ITR concentration and supersaturation), and AUC (the concentration area under the curve during the dissolution - supersaturation - precipitation process). The cocrystals had similar σ_max values during the dissolution and sustained supersaturation for up to 6 h, which gave them an advantage in the AUC values (13-37 times higher) over the drug. The differences in the dissolution profiles of the cocrystals were rationalized in terms of their dissolution rate values.

Amelioration of physicochemical, pharmaceutical, and pharmacokinetic properties of lornoxicam by cocrystallization with a novel coformer

OBJECTIVE

The present study was aimed to prepare and characterize new cocrystals of lornoxicam (LORX), a BCS class II drug employing 1,3-dimethyl urea (DMU) as a coformer to improve physicochemical, pharmaceutical, and pharmacokinetic performance.

METHODS

A screening study was conducted by employing three techniques viz. neat grinding, liquid-assisted grinding (LAG), and solvent evaporation (SE) using different drug-coformer molar ratios (1:1, 1:2, and 1:3). Samples were characterized by DSC, PXRD, ATR-FTIR, SEM, intrinsic dissolution rate (IDR) studies, compressional studies, and pharmacokinetic studies. In vitro dissolution and stability studies (25 °C/60%RH and 40 °C/75%RH for three months) were carried out for cocrystal tablets.

RESULTS

LAG and SE were found successful in ratio 1:3 and IDR showed approximately 28- and 19-fold increase, respectively in 0.1 N HCl (pH 1.2) and buffer (pH 7.4) as compared to pure LORX. The cocrystal exhibited good tabletability and was ∼2.5 times that of LORX at 6000 Psi. Dissolution profiles of tablets of cocrystal increased (56% and 100% at pH 1.2 and 7.4, respectively in contrast to those of physical mixture (PhyMix) (∼35% and ∼10%) and pure LORX (∼17% and ∼7%) within 60 min. The C_max and AUC_0-∞ for the selected cocrystal were significantly increased (p < 0.05) which was 2.4 and 2.5 times, respectively, that of LORX in a single dose oral pharmacokinetic study executed in rabbits. Tablets of cocrystal were found stable at both conditions.

CONCLUSION

The study indicates that cocrystallization with DMU can concomitantly improve tabletability, dissolution rate, and in vivo performance of dissolution limited drug LORX.

Insights into co-amorphous systems in therapeutic drug delivery

Co-amorphous (CAM) systems are promising drug-delivery systems in the arena of therapeutic drug delivery, addressing the poor aqueous solubility of drugs by enhancing solubility and thereby improving the oral bioavailability and therapeutic effect of the drug. A CAM system is a single-phase homogeneous blend of two or more low molecular weight molecules that can be drug–drug or drug–co-former, stabilized via intermolecular interactions, adding the benefit of thermodynamic stability. This review covers the fundamentals of CAM systems and recent advances in formulation development. In particular, we strive to address the theoretical, molecular, technical and biopharmaceutical aspects, advantages over polymeric amorphous solid dispersions, mechanisms of stabilization of amorphous forms, insights into unexplored in silico tools in excipient selection and regulatory viewpoints.

A Contribution to the Solid State Forms of Bis(demethoxy)curcumin: Co-Crystal Screening and Characterization

Bis(demethoxy)curcumin (BDMC) is one of the main active components found in turmeric. Major drawbacks for its usage are its low aqueous solubility, and the challenging separation from other curcuminoids present in turmeric. Co-crystallization can be applied to alter the physicochemical properties of BDMC in a desired manner. A co-crystal screening of BDMC with four hydroxybenzenes was carried out using four different methods of co-crystal production: crystallization from solution by slow solvent evaporation (SSE), and rapid solvent removal (RSR), liquid-assisted grinding (LAG), and crystallization from the melt phase. Two co-crystal phases of BDMC were obtained with pyrogallol (PYR), and hydroxyquinol (HYQ). PYR-BDMC co-crystals can be obtained only from the melt, while HYQ-BDMC co-crystals could also be produced by LAG. Both co-crystals possess an equimolar composition and reveal an incongruent melting behavior. Infrared spectroscopy demonstrated the presence of BDMC in the diketo form in the PYR co-crystals, while it is in a more stable keto-enol form in the HYQ co-crystals. Solubility measurements in ethanol and an ethanol-water mixture revealed an increase of solubility in the latter, but a slightly negative effect on ethanol solubility. These results are useful for a prospective development of crystallization-based separation processes of chemical similar substances through co-crystallization.

Composing Novel Diclofenac Potassium and l-Proline Salt Cocrystal as a Strategy to Increase Solubility and Dissolution

This research dealt with the multicomponent crystal developed from diclofenac potassium and l-proline to improve the pharmaceutical performance of this anti-inflammatory drug. Slow evaporation of the component mixture at a 1:1 M ratio, supported by ultrasonication, yielded a new salt cocrystal, which was characterized using thermal analysis, Karl Fischer titration, infrared spectrophotometry, powder diffractometry, and single crystal diffractometry. This salt cocrystal was confirmed as a tetrahydrate that comprised diclofenac potassium, l-proline, and water (1:1:4), named DKPH. The new salt cocrystal enhanced the solubility of diclofenac potassium by up to 3.56 folds and accelerated the intrinsic dissolution rate of 3.36 folds. It was supported by the solid and solution phase intermolecular interaction study. A different phase, which indicated a monohydrate form of the salt cocrystal, was found from the low humidity chamber during the isotherm sorption study. However, the tetrahydrate, DKPH, was proven as a stable form under ambient conditions.

Salt Cocrystal of Diclofenac Sodium-L-Proline: Structural, Pseudopolymorphism, and Pharmaceutics Performance Study

Previously, we have reported on a zwitterionic cocrystal of diclofenac acid and L-proline. However, the solubility of this multicomponent crystal was still lower than that of diclofenac sodium salt. Therefore, this study aimed to observe whether a multicomponent crystal could be produced from diclofenac sodium hydrate with the same coformer, L-proline, which was expected to improve the pharmaceutics performance. Methods involved screening, solid phase characterization, structure determination, stability, and in vitro pharmaceutical performance tests. First, a phase diagram screen was carried out to identify the molar ratio of the multicomponent crystal formation. Next, the single crystals were prepared by slow evaporation under two conditions, which yielded two forms: one was a rod-shape and the second was a flat-square form. The characterization by infrared spectroscopy, thermal analysis, and diffractometry confirmed the formation of the new phases. Finally, structural determination using single crystal X-ray diffraction analysis solved the new salt cocrystals as a stable diclofenac-sodium-proline-water (1:1:1:4) named NDPT (natrium diclofenac proline tetrahydrate), and unstable diclofenac-sodium-proline-water (1:1:1:1), named NDPM (natrium diclofenac proline monohydrate). The solubility and dissolution rate of these multicomponent crystals were superior to those of diclofenac sodium alone. The experimental results that this salt cocrystal is suitable for further development.

Structural Characterization of Co-Crystals of Chlordiazepoxide with p-Aminobenzoic Acid and Lorazepam with Nicotinamide by DSC, X-Ray Diffraction, FTIR and Raman Spectroscopy

The low water solubility of benzodiazepines seriously affects their bioavailability and, in consequence, their biological activity. Since co-crystallization has been found to be a promising way to modify undesirable properties in active pharmaceutical ingredients, the objective of this study was to prepare co-crystals of two benzodiazepines, chlordiazepoxide and lorazepam. Using different co-crystallization procedures, slurry evaporation and liquid-assisted grinding, co-crystals of chlordiazepoxide with p-aminobenzoic acid and lorazepam with nicotinamide were prepared for the first time. Confirmation that co-crystals were obtained was achieved through a comparison of the data acquired for both co-crystals using differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD), Fourier-transform infrared (FTIR) and Raman spectroscopy, with comparisons acquired for the physical mixtures of both benzodiazepines and coformers. The compatibility of PXRD patterns of both benzodiazepines co-crystals with those contained in the base Powder Diffraction File (PDF-4+) suggests that new crystal structures were indeed created under the co-crystallization procedure. Single-crystal X-ray diffraction revealed that a chlordiazepoxide co-crystal with p-aminobenzoic acid and a lorazepam co-crystal with nicotinamide crystallized in the monoclinic P2₁/n and P2₁/c space group, respectively, with one molecule of benzodiazepine and one of coformer in the asymmetric unit. FTIR and Raman spectroscopy corroborated that benzodiazepine and coformer are linked by a hydrogen bond without proton exchange. Furthermore, a DSC study revealed that single endothermic DSC peaks assigned to the melting of co-crystals differ slightly depending on the co-crystallization procedures and solvent used, as well as differing from those of starting components.

Benzodiazepines co-crystals screening using FTIR and Raman spectroscopy supported by differential scanning calorimetry

Co-crystals, which are defined as "solids that are crystalline materials composed of two or more molecules in the same crystal lattice" have recently been the focus of increased interest in the pharmaceutical industry since co-crystallization can improve unfavorable physicochemical properties of active pharmaceutical ingredients. Thus, the quest for new co-crystal screening methods has become an issue of importance. The aim of this work was, therefore, to show to what extent expanded methodology based on FTIR and Raman spectroscopy supported by the DSC method can be used as a reliable tool to screen co-crystallization. Because co-crystals of benzodiazepines had not yet been obtained, a set of 72 binary mixtures composed of eight 1,4-benzodiazepine derivatives and nine coformers were used as model substances. Potential co-crystals were prepared in solid-state by liquid-assisted grinding procedure. The characteristic FTIR and Raman bands which reflect hydrogen bond formation between benzodiazepine and coformer were used as proof of co-crystal creation. DSC was used as a supporting tool to reflect the phase transitions which occur during co-crystallization. As a result of the study, four potential co-crystals can be selected: lorazepam with nicotinamide, chlordiazepoxide with p-aminobenzoic and saccharin, and estazolam with fumaric acid. The detailed spectral and thermal characteristics of these systems are presented in this work. Thus, the proposed methodology of co-crystal screening based on FTIR and Raman data supported by the DSC examination of phase transitions facilitates the screening and detection of benzodiazepine co-crystal prepared by short time components ground with a slight additional volume of solvent.

A Comprehensive Study of a New 1.75 Hydrate of Ciprofloxacin Salicylate: SCXRD Structure Determination, Solid Characterization, Water Stability, Solubility, and Dissolution Study

One problem that often arises during the formulation of a dosage form is the solubility and dissolution of the active ingredients. This problem arises in ciprofloxacin, which is a BCS class IV fluoroquinolone antibiotic. A pseudopolymorph is a kind of polymorph in which the number of hydrates is different. In this study, a new pseudopolymorph comprised of ciprofloxacin and salicylic acid was found, namely the salt ciprofloxacin salicylate 1.75 hydrate form. This new solid phase was analyzed by Fourier-transform infrared spectroscope (FTIR), Raman spectroscopy, and thermal analysis and proven by Powder X-ray Diffractometry (PXRD) analysis. The crystal structure was successfully determined by Single Crystal X-ray Diffractometry (SCXRD) analysis. It was found that the piperazinyl group of ciprofloxacin is protonated by H+ from the carboxylic group of salicylic acid. In the unit cell, two ciprofloxacin and two salicylic acid molecules were independent with four water molecules, in which one water molecule had 0.5 occupancy due to inversion symmetry. Interestingly, this hydrate crystal dehydrated by grinding for 105 minutes forms an anhydrous crystalline phase, which was analyzed with FTIR, Raman spectroscopy, thermal analysis, and PXRD. The solubility and dissolution tests were carried out using UV-Visible spectrophotometry and a multiple linear regression method. This new hydrate solid phase has a better profile than the original ciprofloxacin crystal, according to the solubility and dissolution tests.

Improved Solubility and Dissolution Rates in Novel Multicomponent Crystals of Piperine with Succinic Acid

The objectives of this study were to prepare and characterize a novel piperine–succinic acid multicomponent crystal phase and to evaluate the improvement in the solubility and dissolution rate of piperine when prepared in the multicomponent crystal formation. The solid-state characterization of the novel multicomponent crystal was performed by powder X-ray diffraction (XRD), differential scanning calorimetry (DSC), and Fourier transform-infrared (FT-IR) spectroscopy. Solubility and dissolution rate profiles were evaluated in distilled water. The physical stability was evaluated under high relative humidity (75% and 100% RH). The determination of the single crystal X-ray diffraction structure revealed that this novel multicomponent crystal was a cocrystalline phase of piperine–succinic acid (2:1 molar ratio). The differential scanning calorimetry thermogram of the cocrystal showed a single and sharp endothermic peak at 110.49 °C. The cocrystal resulted in greater solubility and a faster dissolution rate of piperine than intact piperine. This improvement was a result of the formation of a channel structure in the cocrystal. In addition, the cocrystal was stable under a humid condition.

Pharmaceutical Cocrystal Development of TAK-020 with Enhanced Oral Absorption

The objective of this study was to improve the solubility of poorly water-soluble drugs by pharmaceutical cocrystal engineering techniques and select the best pharmaceutical forms with high solubility and solubilized formulations for progress from the early discovery stage toward the clinical stage. Several pharmaceutical cocrystals of TAK-020, a Bruton tyrosine kinase inhibitor, were newly discovered in the screening based on the solid grinding method and the slurry method, considering thermodynamic factors that dominate cocrystal formation. TAK-020/gentisic acid cocrystal (TAK-020/GA CC) was selected based on a physicochemical property of enhanced dissolution rate. TAK-020/GA CC was proven to be a reliable cocrystal formation with a definitive stoichiometric ratio by a variety of analytical techniques—pKa calculation, solid-state nuclear magnetic resonance, and single X-ray structure analysis from the view of regulation. Furthermore, its absorption was remarkable and beyond those achieved in currently existing solubilized formulation techniques, such as nanocrystal, amorphous solid dispersion, and lipid-based formulation, in dog pharmacokinetic studies. TAK-020/GA CC was the best drug form, which might lead to good pharmacological effects with regard to enhanced absorption and development by physicochemical characterization. Through the trials of solid-state optimization from early drug discovery to pharmaceutical drug development, the cocrystals can be an effective option for achieving solubilization applicable in the pharmaceutical industry.

Identification of a previously unreported co-crystal form of acetazolamide: a combination of multiple experimental and virtual screening methods

In this work, we demonstrate an approach of trying multiple methods in a more comprehensive search for co-crystals of acetazolamide.

Sustainable synthesis of ambrisentan – syringic acid cocrystal: employing mechanochemistry in the development of novel pharmaceutical solid form

Development of the pharmaceutical cocrystal of ambrisentan with syringic acid via mechanochemistry as a greener and sustainable methodology with improved biopharmaceutical parameters.