Improved oral bioavailability of BCS class 2 compounds by self nano-emulsifying drug delivery systems (SNEDDS): the underlying mechanisms for amiodarone and talinolol

Self-Nanoemulsifying Formulation Improves Oral Bioavailability and Insulin Sensitizing Potency of Formononetin-Vitamin E Conjugate in Type 2 Diabetic Mice

The escalating incidence of obesity, diabetes, and insulin resistance has become a significant global health concern. In this study, we have developed a self-nanoemulsifying delivery system (SNEDS) of formononetin-vitamin E conjugate (VESylated-FMN) for improving its oral bioavailability and improving insulin sensitivity and glycemic control. The developed SNEDS were characterized using dynamic light scattering and transmission electron microscopy. Thereafter, the loading capacity, in vitro release, thermodynamic, and gastrointestinal stability of the developed formulation were evaluated. The safety and oral bioavailability of VESylated-FMN-SNEDS were assessed in Sprague-Dawley rats, whereas insulin-sensitizing potency was assessed in high-fat diet-induced type 2 diabetic mice. The VESylated-FMN-SNEDS quickly emulsified on dilution (droplet size ∼79.17 nm) and showed remarkable thermodynamic and gastrointestinal stability. The developed formulation demonstrated enhanced oral bioavailability (∼1.3-fold higher AUC0-t) of VESylated-FMN without liver and kidney injury. Consequently, VESylated-FMN-SNEDS significantly improves insulin sensitivity and glycemic control in HFD-fed mice compared to VESylated-FMN by upregulating the transcript level of insulin-sensitizing genes. Therefore, the SNEDS formulation could be an effective strategy to augment the oral bioavailability and insulin-sensitizing potency of VESylated-FMN.

Optimization of Glibenclamide Loaded Thermoresponsive SNEDDS Using Design of Experiment Approach: Paving the Way to Enhance Pharmaceutical Applicability

Thermoresponsive self-nanoemulsifying drug delivery systems (T-SNEDDS) offer a promising solution to the limitations of conventional SNEDDS formulations. Liquid SNEDDS are expected to enhance drug solubility; however, they are susceptible to leakage during storage. Even though solid SNEDDS offers a solution to this storage instability, they introduce new challenges, namely increased total dosage and potential for drug trapping within the formulation. The invented T-SNEDDS was used to overcome these limitations and improve the dissolution of glibenclamide (GBC). Solubility and transmittance studies were performed to select a suitable oil and surfactant. Design of Experiments (DoE) software was used to study the impact of propylene glycol and Poloxamer 188 concentrations on measured responses (liquefying temperature, liquefying time, and GBC solubility). The optimized formulation was subjected to an in vitro dissolution study. The optimized T-SNEDDS consisted of Kolliphor EL and Imwitor 308 as surfactants and oil. The optimized propylene glycol and Poloxamer 188 concentrations were 13.7 and 7.9% w/w, respectively. It exhibited a liquefying temperature of 35.0 °C, a liquefying time of 119 s, and a GBC solubility of 5.51 mg/g. In vitro dissolution study showed that optimized T-SNEDDS exhibited 98.8% dissolution efficiency compared with 2.5% for raw drugs. This study presents a promising approach to enhance pharmaceutical applicability by resolving the limitations of traditional SNEDDS.

Self-Nanoemulsifying Drug Delivery System Combined with a Polymeric Amorphous System of Glibenclamide for Enhanced Drug Dissolution and Stability

Self-nanoemulsifying drug delivery systems (SNEDDS) have been widely applied to improve the dissolution and bioavailability of hydrophobic medications like glibenclamide (GB). However, the acid liability of GB limits its loading in SNEDDS formulation owing to the expected drug degradation. The present study investigated the ability of a polymeric amorphous system (PAS) to amorphize raw GB and facilitate its integration within dispersed SNEDDS. Liquid-SNEDDS (L-SNEDDS), solid-SNEDDS (S-SNEDDS), and combined systems (SNEDDS + PAS) were prepared for this purpose. The physicochemical properties of the prepared formulations were examined using a zeta-sizer, SEM, DSC, PXRD, and dissolution apparatus. In addition, GB integrity within formulations following incubation in a stability chamber was also investigated. The prepared formulations were able to be dispersed within the nanosize range. SEM, DSC, and PXRD showed that freeze-drying (FD) was superior to the microwave (MW) method in GB amorphization. Even though L-SNEDDS and S-SNEDDS were able to increase the dissolution efficiency (DE) of GB, drug degradation was observed. However, PAS prepared using FD was able to increase the DE of GB from 2.5% to 84.2% and protect the drug from chemical degradation. The present study revealed that a combined system (SNEDDS + PAS) is a promising approach to enhance the stability of acid-labile drugs and facilitate the integration of amorphous drugs within a dispersed SNEDDS formulation.

Development and Evaluation of Solidified Supersaturated SNEDDS Loaded with Triple Combination Therapy for Metabolic Syndrome

The present study aimed to develop and optimize solidified supersaturated self-nanoemulsifying drug delivery systems (SNEDDS) for the combined administration of antihypertensive, antihyperglycemic, and antihyperlipidemic drugs to enhance their solubility and dissolution during the treatment of metabolic syndrome. Various SNEDDS formulations were prepared and subjected to pharmaceutical assessment. The solubility of candesartan (CC), glibenclamide (GB), and rosuvastatin (RC) in SNEDDS and supersaturated SNEDDS formulations was evaluated. The optimized formulation was solidified using Syloid adsorbent at different ratios. Pharmaceutical characterization of the formulations included particle size, zeta potential, in-vitro dissolution, PXRD, FTIR, and SEM analysis. The prepared optimized formulation (F6) was able to form homogeneous nanoemulsion droplets without phase separation, which is composed of Tween 20: PEG-400: Capmul MCM (4: 3: 3). It was mixed with 5% PVP-K30 to prepare a supersaturated liquid SNEDDS formulation (F9). In addition, it was found that the addition of PVP-K30 significantly increased solubility CC and GB from 20.46 ± 0.48 and 6.73 ± 0.05 to 27.67 ± 1.72 and 9.45 ± 0.32 mg/g, respectively. In-vitro dissolution study revealed that liquid and solid SNEDD formulations remarkably improved the dissolution rates of CC, GB, and RC compared to pure drugs. XRPD and FTIR analysis revealed that all drugs present in an amorphous state within prepared solidified supersaturated SNEDDS formulation. SEM images showed that liquid SNEDDS formulation was successfully adsorbed on the surface of Syloid. Overall, optimized F9 and solidified supersaturated SNEDDS formulations showed superior performance in enhancing drug solubility and dissolution rate. The present study revealed that the proposed triple combination therapy of metabolic syndrome holds a promising strategy during the treatment of metabolic syndrome. Further in-vivo studies are required to evaluate the therapeutic efficacy of prepared solidified supersaturated SNEDDS formulation.

Nanotechnology-Based Strategies for Extended-Release Delivery of Angiotensin Receptor Blockers (ARBs): A Comprehensive Review

There has been a significant shift in the perception of hypertension as an important contributor to the global disease burden. Approximately 6 % and 8 % of pregnancies are affected by hypertension, which can adversely affect the mother and the fetus. Furthermore, a hypertensive individual is at increased risk of developing kidney disease, arterial hardening, eye damage, and strokes. Using angiotensin receptor blockers (ARBs) is widespread in treating hypertension, heart failure, coronary artery disease, and diabetic nephropathy. Despite this, some ARBs have limited use due to their poor oral bioavailability and water solubility. To tackle this, a variety of nanoparticle (NP)-based systems, such as polymeric NPs (i. e., dendrimers), polymeric micelles, polymer-drug conjugates, lipid NPs, nanoemulsions, self-emulsifying drug delivery systems (SEDDS), solid lipid NPs (SLNs), nanostructured lipid carriers (NLCs), carbon-based nanocarriers, inorganic NPs, and nanocrystals, have been recently developed for efficient delivery of losartan, Valsartan (Val), Olmesartan (OLM), Telmisartan (TEL), Candesartan, Eprosartan, Irbesartan, and Azilsartan to target cells. This review article provides a literature-based comparison of the various classes of ARBs, their mechanisms of action, and an overview of the nanoformulations developed for ARB delivery and successfully applied to managing hypertension, diabetic complications, and other conditions.

Strategies to Enhance the Solubility and Bioavailability of Tocotrienols Using Self-Emulsifying Drug Delivery System

Tocotrienols have higher medicinal value, with multiple sources of evidence showing their biological properties as antioxidant, anti-inflammatory, and osteoprotective compounds. However, tocotrienol bioavailability presents an ongoing challenge in its translation into viable products. This is because tocotrienol oil is known to be a poorly water-soluble compound, making it difficult to be absorbed into the body and resulting in less effectiveness. With the potential and benefits of tocotrienol, new strategies to increase the bioavailability and efficacy of poorly absorbed tocotrienol are required when administered orally. One of the proposed formulation techniques was self-emulsification, which has proven its capacity to improve oral drug delivery of poorly water-soluble drugs by advancing the solubility and bioavailability of these active compounds. This review discusses the updated evidence on the bioavailability of tocotrienols formulated with self-emulsifying drug delivery systems (SEDDSs) from in vivo and human studies. In short, SEDDSs formulation enhances the solubility and passive permeability of tocotrienol, thus improving its oral bioavailability and biological actions. This increases its medicinal and commercial value. Furthermore, the self-emulsifying formulation presents a useful dosage form that is absorbed in vivo independent of dietary fats with consistent and enhanced levels of tocotrienol isomers. Therefore, a lipid-based formulation technique can provide an additional detailed understanding of the oral bioavailability of tocotrienols.

Atorvastatin-loaded pro-nanolipospheres with ameliorated oral bioavailability and antidyslipidemic activity

Despite significant advances in oral drug delivery technologies, many drugs are prone to limited oral bioavailability due to biological barriers that hinder drug absorption. Pro-nanolipospheres (PNL) are a form of delivery system that can potentiate the oral bioavailability of poorly water-soluble drugs through a variety of processes, including increased drug solubility and protecting them from degradation by intestinal or hepatic first-pass metabolism. In this study, pro-nanolipospheres were employed as a delivery vehicle for improving the oral bioavailability of the lipophilic statin, atorvastatin (ATR). Various ATR-loaded PNL formulations, composed of various pharmaceutical ingredients, were prepared by the pre-concentrate method and characterized by determining particle size, surface charge, and encapsulation efficiency. An optimized formula (ATR-PT PNL) showing the smallest particle size, highest zeta potential, and highest encapsulation efficiency was selected for further in vivo investigations. The in vivo pharmacodynamic experiments demonstrated that the optimized ATR-PT PNL formulation exerted a potent hypolipidemic effect in a Poloxamer® 407-induced hyper-lipidaemia rat model by restoring normal cholesterol and triglyceride serum levels along with alleviating serum levels of LDL while elevating serum HDL levels, compared to pure drug suspensions and marketed ATR (Lipitor®). Most importantly, oral administration of the optimized ATR-PT PNL formulation showed a dramatic increase in ATR oral bioavailability, as evinced by a 1.7- and 3.6-fold rise in systemic bioavailability when compared with oral commercial ATR suspensions (Lipitor®) and pure drug suspension, respectively. Collectively, pro-nanolipospheres might represent a promising delivery vehicle for enhancing the oral bioavailability of poorly water-soluble drugs.

Self-nanoemulsifying formulation for oral delivery of sildenafil: effect on physicochemical attributes and in vivo pharmacokinetics

Sildenafil (SLD) is employed for the management of erectile dysfunction and pulmonary arterial hypertension. It exhibits meagre water solubility and is available in the form of citrate salt hydrate to improve the solubility. However, it still exhibits moderate solubility, high first-pass metabolism, resulting in very less oral bioavailability. The present study demonstrates the preparation of self-nanoemulsifying drug delivery system for augmenting the oral bioavailability of SLD. Oleic acid and Capmul MCM C8 blend (oil phase), Cremophor^® RH40 (surfactant), and Labrafil^® M1944 CS (cosurfactant) were selected as main constituents for making liquid preconcentrate based on the solubility and emulsification study. The preconcentrate upon dilution and emulsification showed droplet size 52.03 ± 13.03 nm, PDI 0.143 ± 0.028, and % transmittance was 99.77 ± 1.86% with SLD load of 40 mg/g of formulation. The prepared formulation was further assessed for stability, in vitro release, Caco-2 cell uptake, and in vivo pharmacokinetic performance. SLD-SNEDDS formulation was found to be robust in terms of stability against several folds dilution in the gastrointestinal tract (GIT), freeze-thaw cycles, and had a storage stability of 3 months at 4 °C and 25 °C. SLD-SNEDDS showed ~4.7-fold and ~5-fold increase in time- and concentration-dependent cellular uptake as against SLD cultured with Caco-2 cells. In vivo pharmacokinetic study revealed ~5.8- and ~2.5-fold increase in AUC_0-∞ values in case of SLD-SNEDDS as against SLD suspension and SLD citrate solution, respectively.

The Influence of the Polymer Type on the Quality of Newly Developed Oral Immediate-Release Tablets Containing Amiodarone Solid Dispersions Obtained by Hot-Melt Extrusion

The present study aims to demonstrate the influence of the polymer-carrier type and proportion on the quality performance of newly developed oral immediate-release tablets containing amiodarone solid dispersions obtained by hot-melt extrusion. Twelve solid dispersions including amiodarone and different polymers (PEG 1500, PEG 4000; PEG 8000, Soluplus^®, and Kolliphor^® 188) were developed and prepared by hot-melt extrusion using a horizontal extruder realized by the authors in their own laboratory. Only eleven of the dispersions presented suitable physical characteristics and they were used as active ingredients in eleven tablet formulations that contain the same amounts of the same excipients, varying only in solid dispersion type. The solid dispersions’ properties were established by optical microscopy with reflected light, volumetric controls and particle size evaluation. In order to prove that the complex powders have appropriate physical characteristics for the direct compression process, they were subjected to different analyses regarding their flowability and compressibility behavior. Additionally, the Fourier transform infrared spectroscopy and X-ray diffraction analysis were performed on the obtained solid dispersions. After confirming the proper physical attributes for all blends, they were processed into the form of tablets by direct compression technology. The manufactured tablets were evaluated for pharmacotechnical (dimensions–diameter and thickness, mass uniformity, hardness and friability) and in vitro biopharmaceutical (disintegration time and drug release) performances. Furthermore, the influence of the polymer matrix on their quality was determined. The high differences in flow and compression performances of the solid dispersions prove the relevant influence of the polymer type and their concentration-dependent plasticizing properties. The increase in flowability and compressibility characteristics of the solid dispersions could be noticed after combining them with direct compression excipients owning superior mechanical qualities. The influence of the polymer type is best detected in the disintegration test, where the obtained values are quite different between the studied formulations. The use of PEG 1500 alone or combined in various proportions with Soluplus^® leads to rapid disintegration. In contrast, the mixture of PEG 4000 and Poloxamer 188 in equal proportions determined the increase in disintegration time to 120 s. The use of Poloxamer 188 alone and a 3:1 combination of PEG 4000 and Soluplus^® also generates a prolonged disintegration time for the tablets.

Functional Excipients and Novel Drug Delivery Scenario in Self-nanoemulsifying Drug Delivery System: A Critical Note

Lipid-based formulations have emerged as prospective dosage forms for extracting the therapeutic effects of existing lipophilic compounds and novel chemical entities more efficiently. Compared to other excipients, lipids have the added benefit of enhancing the bioavailability of lipophilic and highly metabolizable drugs due to their unique physicochemical features and similarities to in vivo components. Furthermore, lipids can minimize the needed dose and even the toxicity of drugs with poor aqueous solubility when employed as the primary excipient. Hence, the aim of the present review is to highlight the functional behavior of lipid excipients used in SNEDD formulation along with the stability aspects of the formulation in vivo. Moreover, this review also covered the importance of SNEDDS in drug delivery, the therapeutic and manufacturing benefits of lipids as excipients, and the technological advances made so far to convert liquid to solid SNEDDS like melt granulation, adsorption on solid support, spray cooling, melt extrusion/ spheronization has also highlighted. The mechanistic understanding of SNEDD absorption in vivo is highly complex, which was discussed very critically in this review. An emphasis on their application and success on an industrial scale was presented, as supported by case studies and patent surveys.

Strategies for enhancing the oral bioavailability of cannabinoids

INTRODUCTION

Oral administration of cannabinoids is a convenient route of administration in many cases. To enhance the poor and variable bioavailability of cannabinoids, selected strategies utilizing proper delivery systems have been designed. Low solubility in the GI aqueous media is the first and most critical barrier. Thereafter, cannabinoids can reach the systemic blood circulation via the portal vein that is associated with significant hepatic first pass metabolism (FPM) or bypass it via lymphatic absorption.

AREAS COVERED

The solubility obstacle of cannabinoids is mainly addressed with lipid-based formulations such as self-nanoemulsifying drug delivery systems (SNEDDS). Certain lipids are used to overcome the solubility issue. Surfactants and other additives in the formulation have additional impact on several barriers, including dictating the degree of lymphatic bioavailability and hepatic FPM. Gastro-retentive formulation is also plausible.

EXPERT OPINION

Comparison of the role of the same SNEDDS formulation, cyclosporine vs. cannabinoids, when used to elevate the oral bioavailability of different compounds, is presented. It illustrates some similarities and major mechanistic differences obtained by the same SNEDDS. Thus, the different influence over the absorption pathway illuminates the importance of understanding the absorption mechanism and its barriers to properly select appropriate strategies to achieve enhanced oral bioavailability.

Lipid-Based Nanocarriers for Neurological Disorders: A Review of the State-of-the-Art and Therapeutic Success to Date

Neurodegenerative disorders including Alzheimer's, Parkinson's, and dementia are chronic and advanced diseases that are associated with loss of neurons and other related pathologies. Furthermore, these disorders involve structural and functional defections of the blood-brain barrier (BBB). Consequently, advances in medicines and therapeutics have led to a better appreciation of various pathways associated with the development of neurodegenerative disorders, thus focusing on drug discovery and research for targeted drug therapy to the central nervous system (CNS). Although the BBB functions as a shield to prevent toxins in the blood from reaching the brain, drug delivery to the CNS is hindered by its presence. Owing to this, various formulation approaches, including the use of lipid-based nanocarriers, have been proposed to address shortcomings related to BBB permeation in CNS-targeted therapy, thus showing the potential of these carriers for translation into clinical use. Nevertheless, to date, none of these nanocarriers has been granted market authorization following the successful completion of all stages of clinical trials. While the aforementioned benefits of using lipid-based carriers underscores the need to fast-track their translational development into clinical practice, technological advances need to be initiated to achieve appropriate capacity for scale-up and the production of affordable dosage forms.

Synthesis and Pharmacological Characterization of Visabron, a Backbone Cyclic Peptide Dual Antagonist of α4β1 (VLA-4)/α9β1 Integrin for Therapy of Multiple Sclerosis

Integrins α4β1/ α9β1 are important in the pathogenesis and progression of inflammatory and autoimmune diseases by their roles in leukocyte activation and trafficking. Natalizumab, a monoclonal antibody selectively targeting α4β1 integrin and blocking leukocyte trafficking to the central nervous system, is an immunotherapy for multiple sclerosis (MS). However, due to its adverse effects associated with chronic treatment, alternative strategies using small peptide mimetic inhibitors are being sought. In the present study, we synthesized and characterized visabron c (4-4), a backbone cyclic octapeptide based on the sequence TMLD, a non-RGD unique α4β1 integrin recognition sequence motif derived from visabres, a proteinous disintegrin from the viper venom. Visabron c (4-4) was selected from a minilibrary with conformational diversity based on its potency and selectivity in functional adhesion cellular assays. Visabron c (4-4)'s serum stability, pharmacokinetics, and therapeutic effects following ip injection were assessed in an experimental autoimmune encephalomyelitis (EAE) animal model. Furthermore, visabron c (4-4)'s lack of toxic effects in mice was verified by blood analysis, tissue pathology, immunogenicity, and "off-target" effects, indicating its significant tolerability and lack of immunogenicity. Visabron c (4-4) can be delivered systemically. The in vitro and in vivo data justify visabron c (4-4) as a safe alternative peptidomimetic lead compound/drug to monoclonal anti-α4 integrin antibodies, steroids, and other immunosuppressant drugs. Moreover, visabron c (4-4) design may pave the way for developing new therapies for a variety of other inflammatory and/or autoimmune diseases.

In Vitro Evaluation of a Solid Supersaturated Self Nanoemulsifying Drug Delivery System (Super-SNEDDS) of Aprepitant for Enhanced Solubility

Aprepitant (APR) belongs to Class II of the Biopharmaceutical Classification System (BCS) because of its low aqueous solubility. The objective of the current work is to develop self-nanoemulsifying drug delivery systems (SNEDDS) of APR to enhance its aqueous solubility. Preformulation studies involving screening of excipients for solubility and emulsification efficiency were carried out. Pseudo ternary phase diagrams were constructed with blends of oil (Imwitor^® 988), cosolvent (Transcutol^® P), and various surfactants (Kolliphor^® RH40, Kolliphor^® ELP, Kolliphor^® HS15). The prepared SNEDDS were characterized for droplet size and nanoemulsion stability after dilution. Supersaturated SNEDDS (super-SNEDDS) were prepared to increase the quantity of loaded APR into the formulations. HPMC, PVP, PVP/VA, and Soluplus^® were used as polymeric precipitation inhibitors (PPI). PPIs were added to the formulations at 5% and 10% by weight. The influence of the PPIs on drug precipitation was investigated. In vitro lipolysis test was carried out to simulate digestion of formulations in the gastrointestinal tract. Optimized super-SNEDDS were formulated into free-flowing granules by adsorption on the porous carriers such as Neusilin^® US2. In vitro dissolution studies of solid super-SNEDDS formulation revealed an increased dissolution rate of the drug due to enhanced solubility. Consequently, a formulation to improve the solubility and potentially bioavailability of the drug was developed.

Amorphous Form of Carvedilol Phosphate-The Case of Divergent Properties

The amorphous form of carvedilol phosphate (CVD) was obtained as a result of grinding. The identity of the obtained amorphous form was confirmed by powder X-ray diffraction (PXRD), different scanning calorimetry (DSC), and FT-IR spectroscopy. The process was optimized in order to obtain the appropriate efficiency and time. The crystalline form of CVD was used as the reference standard. Solid dispersions of crystalline and amorphous CVD forms with hydrophilic polymers (hydroxypropyl-β-cyclodextrin, Pluronic^® F-127, and Soluplus^®) were obtained. Their solubility at pH 1.2 and 6.8 was carried out, as well as their permeation through a model system of biological membranes suitable for the gastrointestinal tract (PAMPA-GIT) was established. The influence of selected polymers on CVD properties was defined for the amorphous form regarding the crystalline form of CVD. As a result of grinding (four milling cycles lasting 15 min with 5 min breaks), amorphous CVD was obtained. Its presence was confirmed by the “halo effect” on the diffraction patterns, the disappearance of the peak at 160.5 °C in the thermograms, and the changes in position/disappearance of many characteristic bands on the FT-IR spectra. As a result of changes in the CVD structure, its lower solubility at pH 1.2 and pH 6.8 was noted. While the amorphous dispersions of CVD, especially with Pluronic^® F-127, achieved better solubility than combinations of crystalline forms with excipients. Using the PAMPA-GIT model, amorphous CVD was assessed as high permeable (Papp > 1 × 10⁻⁶ cm/s), similarly with its amorphous dispersions with excipients (hydroxypropyl-β-cyclodextrin, Pluronic^® F-127, and Soluplus^®), although in their cases, the values of apparent constants permeability were decreased.

Self-emulsifying Drug Delivery System Improve Oral Bioavailability: Role of Excipients and Physico-chemical Characterization

Self-emulsifying drug delivery system (SEDDS) is a kind of solid or liquid formulation composed of drugs, oil, surfactant and cosurfactant. It could form a fine emulsion (micro/nano) in the gastrointestinal tract after oral administration. Later on, the formed emulsion is absorbed through the lymphatic pathway. The oral bioavailability of drugs in SEDDS would be improved for bypassing the first-pass effect of the liver. Therefore, SEDDS has become a vital strategy to increase the oral bioavailability of poor watersoluble drugs. In addition, there is no aqueous phase in SEDDS, thus SEDDS is a homogeneous system, consequently being suitable for large-scale production and more stable than conventional emulsion. However, the role of formulation aspects in the biological property of SEDDS is not fully clear. In order to prepare the satisfying SEDDS to improve oral drug bioavailability, we need to fully understand the various factors that affect the in vivo behavior of SEDDS. In this review, we would explore the role of ingredient (drugs, oils, surfactant and cosurfactant) of SEDDS in increasing oral drug bioavailability. We would also discuss the effect of physicochemical property (particle size and zeta potential) of SEDDS on the oral drug bioavailability enhancement. This review would provide an approach to develop a rational SEDDS to improving oral drug bioavailability. Lay Summary: Self-emulsifying drug-delivery system (SEDDS) has been proven to be promising in ameliorating the oral bioavailability of poor water-soluble drugs. This review highlighted the influence of excipients and physicochemical property of SEDDS on the formation of emulsion and the oral absorption of drugs in the body.

Supersaturated LFCS type III self-emulsifying delivery systems of sorafenib tosylate with improved biopharmaceutical performance: QbD-enabled development and evaluation

The current studies investigate the application of quality by design-enabled type III self-emulsifying delivery system (Type III-SEDDS) of sorafenib tosylate (SFN) in improving its biopharmaceutical attributes. Initially, lipidic and emulsifying excipients were selected by carrying out solubility and phase titration experiments. After screening studies using Taguchi OA design, Type III-SEDDS were further optimised using D-optimal mixture design. The prepared formulations were assessed for globule size, zeta potential and percent of drug release. Following graphical optimisation, the optimum formulation was earmarked and further supersaturated to form saturated Type III-SEDDS (Sat-Type III-SEDDS) using a combination of HPMC and PVP to improve the stability of the formulation for a prolonged period. In vitro drug release of Type III-SEDDS study indicated approximately 8-fold improvement in dissolution rate over the pure powder drug. Cell uptake studies demonstrated higher uptake of dye-loaded Type III-SEDDS formulations in Caco-2 cells vis-à-vis plain dye. Cytotoxicity assay on Hep G2 cells revealed significant reduction in cell growth with Type III- and Sat-Type III-SEDDS vis-à-vis the pure drug. Furthermore, in situ permeation studies carried out using Wistar rats exhibited nearly 8.3- to 10.2-fold augmentation in permeation and absorption parameters of the drug from the Type III- and Sat-Type III-SEDDS, respectively, vis-à-vis the pure drug. Pharmacokinetic studies indicated nearly 3.98- and 3.62-fold improvement in AUC_0-72, and 8.01- and 5.42-fold in C_max, along with 0.25-fold decrease in T_max of the drug from Type III- and Sat-Type III-SEDDS, respectively, in comparison with the SFN suspension. Furthermore, high degree of level A linear correlation was established between fractions of drug dissolved (in vitro) and of drug absorbed (in vivo) at the corresponding time points for Sat-Type III-SEDDS and pure drug, whereas the Type III-SEDDS exhibited a nonlinear relationship. Stability studies indicated the robustness of Sat-Type III-SEDDS, when stored at 25 °C for 3 months. Overall, the manuscript documents the successful systematic development of SFN-loaded Sat-Type III-SEDDS with distinctly improved biopharmaceutical performance. Graphical abstract.

Crucial Role of PLGA Nanoparticles in Mitigating the Amiodarone-Induced Pulmonary Toxicity

BACKGROUND

Amiodarone (AMD) is a widely used anti-arrhythmic drug, but its administration could be associated with varying degrees of pulmonary toxicity. In attempting to circumvent this issue, AMD-loaded polymeric nanoparticles (AMD-loaded NPs) had been designed.

MATERIALS AND METHODS

AMD was loaded in NPs by the nanoprecipitation method using two stabilizers: bovine serum albumin and Kolliphor® P 188. The physicochemical properties of the AMD-loaded NPs were determined. Among the prepared NPs, two ones were selected for further investigation of spectral and thermal analysis as well as morphological properties. Additionally, in vitro release patterns were studied and kinetically analyzed at different pH values. In vitro cytotoxicity of an optimized formula (NP4) was quantified using A549 and Hep-2 cell lines. In vivo assessment of the pulmonary toxicity on Sprague Dawley rats via histopathological and immunohistochemical evaluations was applied.

RESULTS

The developed NPs achieved a size not more than 190 nm with an encapsulation efficiency of more than 88%. Satisfactory values of loading capacity and yield were also attained. The spectral and thermal analysis demonstrated homogeneous entrapment of AMD inside the polymeric matrix of NPs. Morphology revealed uniform, core-shell structured, and sphere-shaped particles with a smooth surface. Furthermore, the AMD-loaded NPs exhibited a pH-dependent and diffusion-controlled release over a significant period without an initial burst effect. NP4 demonstrated a superior cytoprotective efficiency by diminishing cell death and significantly increasing the IC50 by more than threefold above the pure AMD. Also, NP4 ameliorated AMD-induced pulmonary damage in rats. Significant downregulation of inflammatory mediators and free radicle production were noticed in the NP4-treated rats.

CONCLUSION

The AMD-loaded NPs could ameliorate the pulmonary injury induced by the pure drug moieties. Cytoprotective, anti-fibrotic, anti-inflammatory, and antioxidant properties were presented by the optimized NPs (NP4). Future studies may be built on these findings for diminishing AMD-induced off-target toxicities.

Appraisal of amiodarone-loaded PLGA nanoparticles for prospective safety and toxicity in a rat model

AIMS

Amiodarone (AM) is a highly efficient drug for arrhythmias treatment, but its extra-cardiac adverse effects offset its therapeutic efficacy. Nanoparticles (NPs)-based delivery system could provide a strategy to allow sustained delivery of AM to the myocardium and reduction of adverse effects. The primary purpose was to develop AM-loaded NPs and explore their ameliorative effects versus off-target toxicities.

MATERIALS AND METHODS

Polymeric NPs were prepared using poly lactic-co-glycolic acid and their physicochemical properties were characterized. Animal studies were conducted using a rat model to compare exposure to AM versus that of the AM-loaded NPs. Biochemical evaluation of liver enzymes, lipid profile, and thyroid hormones was achieved. Besides, histopathological changes in liver and lung were studied.

KEY FINDINGS

Under optimal experimental conditions, the AM-loaded NPs had a size of 186.90 nm and a negative zeta potential (-14.67 mV). Biochemical evaluation of AM-treated animal group showed a significant increase in cholesterol, TG, LDL, T4, and TSH levels (ρ < 0.05). Remarkably, the AM-treated group exhibited a significant increase of liver enzymes (ρ < 0.05) coupled with an obvious change in liver architecture. The AM-loaded NPs displayed a reduction of liver damage and enzyme levels. Lung sections of the AM-treated group demonstrated thickening of interalveolar septa, mononuclear cellular infiltration with congested blood vessels, and heavy collagenous fibers deposition. Conversely, less cellular infiltration and septal thickening were observed in the animal lungs treated with the AM-loaded NPs-treated.

SIGNIFICANCE

Our findings demonstrate the competence of the AM-loaded NPs to open several exciting avenues for evading the AM-induced off-target toxicities.

Enabling Oral Amphotericin B Delivery by Merging the Benefits of Prodrug Approach and Nanocarrier-Mediated Drug Delivery

Amphotericin B (AmB) is gold standard therapy for leishmaniasis and fungal infections. Considering the global disease burden, nearly 90% of cases occur in economically vulnerable countries, making the cost of AmB therapy a critical healthcare challenge in controlling disease burden. All currently marketed AmB products are administered through an intravenous (i.v.) route and involve high treatment costs. Designing an orally effective AmB formulation can substantially reduce the cost of therapy and improve patient compliance. However, it is a challenging task because of the distinctive physicochemical properties of AmB. Previously, we developed a lipid-based prodrug of AmB, AmB-oleyl conjugate (AmB-OA), which showcased remarkable stability in the gastrointestinal (GI) environment and improved intestinal permeation. Hereby, we have developed self-nanoemulsifiying drug delivery system (SNEDDS) of AmB-OA to further enhance the oral bioavailability of AmB and potentiate its therapeutic benefits. SNEDDS was developed by screening a wide range of oils, surfactants, and cosurfactants, and formulation composition was optimized using extreme vertices design. AmB-OA SNEDDS possessed the ability of quick self-nanoemulsification on dilution (droplet size ∼56 nm) along with remarkable stability in the GI environment. Accelerated stability (40 °C/75% relative humidity) studies and freeze-thaw cycling studies proved that the formulation was stable at tropical conditions as well as temperature cycling stress. Drug transport analysis in Caco-2 cells revealed a remarkable increase in drug transport for AmB-OA SNEDDS compared to AmB along with minimal cellular toxicities. AmB-OA SNEDDS showcased ∼8.9-fold higher AUC_Tot than AmB in in vivo pharmacokinetic study, proving the effectiveness of formulation to enhance oral bioavailability. In vivo toxicity analysis highlighted the ameliorated toxicity risk associated with SNEDDS formulation. Therefore, the AmB-OA SNEDDS formulation may provide a cost-friendly and effective strategy to resolve the oral AmB drug delivery challenge.

Incorporation of natural assumption to deal with cancer

The current state of the art for the use of natural ingredients for cancer therapy is by reviewing the publications and findings associated with cancer research with the employment of flavonoids. Cancer is the most furious disease making fear in the eyes of mankind. Though various treatment methods are prevalent, the patient's choices are shifting from synthetic treatment strategy to the natural ones. The plant-based metabolites are used very often in our life as a food additive and also as a medicine for primary health care. The safety profile and its efficacy add on advantage for the incorporation of the natural products separately or in combination as a remedy for cancer. Flavonoids, the plant-based metabolites are proven for their anti-inflammatory, anti-oxidant, and anti-cancer properties. Their chemotherapeutic and chemosensitizing power had made it interesting for the researchers to dig more on the health benefits of the flavonoids and incorporating it in a holistic approach, with its natural benefits to relieve the pain and the symptoms of the patient suffering from various medical conditions. The predominant approach for the management of cancer is by following safe and effective treatment modality. In this review, we mentioned the benefits of the flavonoids for the management of various cancers and its potency as a chemotherapeutic agent and as the chemosensitizer. Our mother nature had given remedies to cure various diseases in both human beings and animals by it; we just need to find out the sources and access to them.

Recent Advances in Oral Nano-Antibiotics for Bacterial Infection Therapy

Bacterial infections are the main infectious diseases and cause of death worldwide. Antibiotics are used to treat various infections ranging from minor to life-threatening ones. The dominant route to administer antibiotics is through oral delivery and subsequent gastrointestinal tract (GIT) absorption. However, the delivery efficiency is limited by many factors such as low drug solubility and/or permeability, gastrointestinal instability, and low antibacterial activity. Nanotechnology has emerged as a novel and efficient tool for targeting drug delivery, and a number of promising nanotherapeutic strategies have been widely explored to overcome these obstacles. In this review, we explore published studies to provide a comprehensive understanding of the recent progress in the area of orally deliverable nano-antibiotic formulations. The first part of this article discusses the functions and underlying mechanisms by which nanomedicines increase the oral absorption of antibiotics. The second part focuses on the classification of oral nano-antibiotics and summarizes the advantages, disadvantages and applications of nanoformulations including lipid, polymer, nanosuspension, carbon nanotubes and mesoporous silica nanoparticles in oral delivery of antibiotics. Lastly, the challenges and future perspective of oral nano-antibiotics for infection disease therapy are discussed. Overall, nanomedicines designed for oral drug delivery system have demonstrated the potential for the improvement and optimization of currently available antibiotic therapies.

Neurotropic activity and safety of methylene-cycloalkylacetate (MCA) derivative 3-(3-allyl-2-methylenecyclohexyl) propanoic acid

Polyneuropathy is a disease involving multiple peripheral nerves injuries. Axon regrowth remains the major prerequisite for plasticity, regeneration, circuit formation, and eventually functional recovery and therefore, regulation of neurite outgrowth might be a candidate for treating polyneuropathies. In a recent study, we synthesized and established the methylene-cycloalkylacetate (MCAs) pharmacophore as a lead for the development of a neurotropic drug (inducing neurite/axonal outgrowth) using the PC12 neuronal model. In the present study we extended the characterizations of the in vitro neurotropic effect of the derivative 3-(3-allyl-2-methylenecyclohexyl) propanoic acid (MCA-13) on dorsal root ganglia and spinal cord neuronal cultures and analyzed its safety properties using blood biochemistry and cell counting, acute toxicity evaluation in mice and different in vitro "off-target" pharmacological evaluations. This MCA derivative deserves further preclinical mechanistic pharmacological characterizations including therapeutic efficacy in in vivo animal models of polyneuropathies, toward development of a clinically relevant neurotropic drug.

The effect of piperine on oral absorption of cannabidiol following acute vs. chronic administration

Piperine is an alkaloid naturally found in black pepper with a myriad of pharmacological attributes. Piperine's most far reaching indication is drug absorption enhancment, with supportive data regarding its ability to inhibit first pass effect mechanisms. However, alongside these findings, the role of piperine as an absorption enhancer is undermined with publications stating an apparent effect of a metabolic inducer. The aim of this work is to investigate the effect of repeated administration of piperine in a lipid-based formulation ,on oral absorption of cannabidiol (CBD), compared to acute piperine dosing. The effect of piperine on CBD absorption was determined pre-clinically in the freely moving rat model. Results of this work demonstrated that there was no significant difference in piperine's effect, when given chronically or in a single dose regimen. Both groups resulted in approximate 2.5-fold increase in oral bioavailability of CBD compared to control group without piperine.

Nanoformulation strategies for improving intestinal permeability of drugs: A more precise look at permeability assessment methods and pharmacokinetic properties changes

The therapeutic efficacy of orally administered drugs is often restricted by their inherent limited oral bioavailability. Low water solubility, limited permeability through the intestinal barrier, instability in harsh environment of the gastrointestinal (GI) tract and being substrate of the efflux pumps and the cytochrome P450 (CYP) can impair oral drug bioavailability resulting in erratic and variable plasma drug profile. As more drugs with low membrane permeability are developed, new interest is growing to enhance their intestinal permeability and bioavailability. A wide variety of nanosystems have been developed to improve drug transport and absorption. Sufficient evidence exists to suggest that nanoparticles are able to increase the transepithelial transport of drug molecules. However, key questions remained unanswered. What types of nanoparticles are more efficient? What are preclinical (or clinical) achievements of each type of nanoformulation in terms of pharmacokinetic (PK) parameters? Addressing this issue in this paper, we have reviewed the current literature regarding permeability enhancement, permeability assessment methods and changes in PK parameters following administration of various nanoformulations. Although permeability enhancement by various nanoformulations holds great promise for oral drug delivery, many challenges still need to be addressed before development of more clinically successful nanoproducts.

Study on the Role of the Inclusion Complexes with 2-Hydroxypropyl-β-cyclodextrin for Oral Administration of Amiodarone

The aim of this study was to improve the solubility of amiodarone hydrochloride (AMD) and the drug release using its inclusion complexes with 2-hydroxypropyl-β-cyclodextrin (HP-β-CD). The inclusion complexes were prepared by coprecipitation and freeze-drying. The solubility enhancement of AMD/HP-β-CD inclusion complexes by 4–22 times was evaluated by the phase solubility method. The inclusion complexes were studied both in solution and in solid state by spectroscopic methods, dynamic light scattering (DLS) and zeta potential analysis, SEM, and DSC. The formulations of AMD/HP-β-CD inclusion complexes both as powdered form and as matrix tablets showed superior pharmacokinetic performance in improving loading and release properties in respect of those of the insoluble AMD drug. In vitro kinetic study reveals a complex mechanism of release occurring in three steps: the first one being attributed to a burst effect and the other two to different bonding existing in inclusion complexes. An in vivo test on matrix tablets containing Kollidon® and chitosan also reveals a multiple (at least two) peaks release diagram because of both structures of the inclusion complexes and also of different sites of absorption in biological media (digestive tract).

A Self-Nanoemulsifying Drug Delivery System for Enhancing the Oral Bioavailability of Candesartan Cilexetil: Ex Vivo and In Vivo Evaluation

The drug delivery of candesartan cilexetil encounters an obstacle of low absolute oral bioavailability which is attributed mainly to its low aqueous solubility and efflux by intestinal P-glycoprotein (P-gp) transporters. However, the extent of P-gp contribution in the reduced oral bioavailability of candesartan cilexetil is not clear. In this study, a previously developed candesartan cilexetil-loaded self-nanoemulsifying drug delivery system (SNEDDS) was evaluated for its ability to increase the drug oral bioavailability via the inhibition of intestinal P-gp transporters. Despite the developed SNEDDS showing P-gp inhibition activity, P-gp-mediated efflux was found to have a minor role in the reduced oral bioavailability of candesartan cilexetil. On the other hand, the high surfactant concentration used in SNEDDS formulation represents a major challenge toward their widespread application especially for chronically administered drugs. The designed acute and subacute toxicity studies revealed that the degree of intestinal mucosal damage decreases as the treatment period increases. The latter observation was attributed to the reversibility of surfactant-induced mucosal damage. Thus, the developed SNEDDS could be considered as a promising delivery system for enhancing the oral bioavailability of chronically administered drugs.

Evaluation of Self-Nanoemulsifying Drug Delivery Systems (SNEDDS) for Poorly Water-Soluble Talinolol: Preparation, in vitro and in vivo Assessment

Objective

The aim of this study was to investigate the in vitro and in vivo performance of self-nanoemulsifying drug delivery systems (SNEDDSs) of talinolol (TAL), a poorly water-soluble drug.

Methods

Self-nanoemulsifying drug delivery systems of TAL were prepared using various oils, non-ionic surfactants and/or water-soluble co-solvents and assessed visually/by droplet size measurement. Equilibrium solubility of TAL in the anhydrous and diluted SNEDDS was conducted to achieve the maximum drug loading. The in vitro dissolution experiments and human red blood cells (RBCs) toxicity test, ex vivo gut permeation studies, and bioavailability of SNEDDS in rats were studied to compare the representative formulations with marketed product Cordanum^® 50 mg and raw drug.

Results

The results from the characterization and solubility studies showed that SNEDDS formulations were stable with lower droplet sizes and higher TAL solubility. From the dissolution studies, it was found that the developed SNEDDS provided significantly higher rate of TAL release (>97% in 2.0 h) compared to raw TAL and marketed product Cordanum^®. The RBC lysis test suggested negligible toxicity of the formulation to the cells. The ex vivo permeability assessment and in vivo pharmacokinetics study of a selected SNEDDS formulation (F6) showed about four-fold increase in permeability and 1.58-fold enhanced oral bioavailability of TAL in comparison to pure drug, respectively.

Conclusion

Talinolol loaded SNEDDS formulations could be a potential oral pharmaceutical product with high drug-loading capacity, improved drug dissolution, increased gut permeation, reduced/no human RBC toxicity, and enhanced oral bioavailability.

Self-microemulsifying Drug Delivery System for Improved Oral Delivery of Limonene: Preparation, Characterization, in vitro and in vivo Evaluation

The current investigation aimed at formulating self-microemulsifying drug delivery system (SMEDDS) to ameliorate oral bioavailability of a hydrophobic functional ingredient, limonene. Solubility test, compatibility test, and pseudo-ternary phase diagrams (PTPD) were adopted to screen the optimal compositions of limonene-SMEDDS (L-SMEDDS). The characteristics of this system assessed in vitro, mainly included determination of particle size distribution, observation of morphology via transmission electron microscopy (TEM), testing of drug release in different dissolution media, and evaluation of stability. The oral bioavailability study in vivo of the formulated limonene was performed in rats with the free limonene as the reference. Compared with the free limonene, the distribution study of L-SMEDDS was conducted in Kunming mice after oral administration. The optimized SMEDDS (ethyl oleate, 14.2%; Cremophor EL, 28.6%; isopropanol, 28.6%; and loaded limonene, 28.6%) under the TEM (about 100 nm) was spherical with no significant variations in size/appearance for 30 days at 4, 25, and 60°C. In comparison with free limonene, higher than 89.0% of limonene was released from SMEDDS within 10 min in different dissolution media. An in vivo study showed a 3.71-fold improved oral bioavailability of the formulated limonene compared to the free limonene. The tissue distribution results showed that limonene predominantly accumulated in the various tissues for the L-SMEDDS compared with the free limonene. Hence, L-SMEDDS could remarkably improve the concentration of limonene in the various organs. These findings hinted that the oral bioavailability of limonene could be improved via an effectual delivery system like SMEDDS.

Impact of Porous Excipients on the Manufacturability and Product Performance of Solid Self-Emulsifying Drug Delivery Systems

FDA-approved self-emulsifying medicines rely on liquid-based formulations, which can exhibit limited stability and short shelf-lives. Solid self-emulsifying drug delivery systems (SEDDS) can improve such issues, but there is still a great need for identifying suitable porous carriers to convert liquid SEDDS into solids without impairing their mechanical properties, functionality, and industrial feasibility. The impact of SEDDS adsorption on tableting is also poorly understood. Therefore, solid SEDDS were prepared by adsorbing liquid SEDDS onto ten commercially available porous excipients. Products were assessed with respect to mechanical behavior, tabletability, and product performance. Adsorbing SEDDS onto porous excipients led to satisfactory stability, with the exception of Zeopharm® 600 due to its high alkalinity, and Neusilin® US2/UFL2, which caused quercetin to crystallize out of the liquid concentrate. SEDDS adsorption reduced the elastic recovery of most excipients, making tableting achievable using Aeroperl® 300 and Aerosil® 200/300. The impact of SEDDS on elastic recovery provides additional understanding on solid SEDDS manufacture process. Acceptable tablets were made via direct compression but with slow disintegration. Addition of a superdisintegrant (crospovidone 5% w/w) ensured tablet manufacturing without impairment of product performance. Solid SEDDS displayed several technical advantages over their liquid counterparts, but attention must be given to the properties of the porous excipient chosen. Drug-excipient interactions play a significant role in drug degradation and crystallization in solid SEDDS. Improved mechanical behavior upon adsorption led to well-composed tablets that performed satisfactorily in vitro upon addition of a superdisintegrant. This study provides an insight on excipient-oriented rational development of solid SEDDS.

Cannabinoid Delivery Systems for Pain and Inflammation Treatment

There is a growing body of evidence to suggest that cannabinoids are beneficial for a range of clinical conditions, including pain, inflammation, epilepsy, sleep disorders, the symptoms of multiple sclerosis, anorexia, schizophrenia and other conditions. The transformation of cannabinoids from herbal preparations into highly regulated prescription drugs is therefore progressing rapidly. The development of such drugs requires well-controlled clinical trials to be carried out in order to objectively establish therapeutic efficacy, dose ranges and safety. The low oral bioavailability of cannabinoids has led to feasible methods of administration, such as the transdermal route, intranasal administration and transmucosal adsorption, being proposed. The highly lipophilic nature of cannabinoids means that they are seen as suitable candidates for advanced nanosized drug delivery systems, which can be applied via a range of routes. Nanotechnology-based drug delivery strategies have flourished in several therapeutic fields in recent years and numerous drugs have reached the market. This review explores the most recent developments, from preclinical to advanced clinical trials, in the cannabinoid delivery field, and focuses particularly on pain and inflammation treatment. Likely future directions are also considered and reported.

Nano-scale drug delivery systems for antiarrhythmic agents

Arrhythmia means the heart is beating too fast, too slow, or with an irregular pattern. Due to the side effects and low bioavailability of many antiarrhythmic drugs, nano-encapsulation has been widely used for their targeted delivery. Lipid nanocapsules, nano liposomes, nano niosomes, solid lipid nanoparticles and polymeric nanoparticles are common nano-carriers used for this purpose. The aim of this article is to summarize some of nano systems used for the specific delivery of antiarrhythmic agents to target tissues. At first, nanotechnology and its applications in drug delivery are described in brief. Then, some information on arrhythmias and antiarrhythmic drugs are provided. Finally, the nano drug delivery systems are explained and examples of their applications in encapsulation of antiarrhythmic drugs are presented.

Enhancing Oral Bioavailability of Cyclic RGD Hexa-peptides by the Lipophilic Prodrug Charge Masking Approach: Redirection of Peptide Intestinal Permeability from a Paracellular to Transcellular Pathway

Hydrophilic peptides constitute most of the active peptides. They mostly permeate via tight junctions (paracellular pathway) in the intestine. This permeability mechanism restricts the magnitude of their oral absorption and bioavailability. We hypothesized that concealing the hydrophilic residues of the peptide using the lipophilic prodrug charge masking approach (LPCM) can improve the bioavailability of hydrophilic peptides. To test this hypothesis, a cyclic N-methylated hexapeptide containing Arg-Gly-Asp (RGD) and its prodrug derivatives, masking the Arg and Asp charged side chains, were synthesized. The library was evaluated for intestinal permeability in vitro using the Caco-2 model. Further investigation of metabolic stability ex vivo models in rat plasma, brush border membrane vesicles (BBMVs), and isolated CYP3A4 microsomes and pharmacokinetic studies was performed on a selected peptide and its prodrug (peptide 12). The parent drug analogues were found to have a low permeability rate in vitro, corresponding to atenolol, a marker for paracellular permeability. Moreover, palmitoyl carnitine increased the P_app of peptide 12 by 4-fold, indicating paracellular permeability. The P_app of the prodrug derivatives was much higher than that of their parent peptides. For instance, the P_app of the prodrug 12P was 20-fold higher than the P_app of peptide 12 in the apical to basolateral (AB) direction. Whereas the permeability in the opposite direction (BA of the Caco-2 model) was significantly faster than the P_app AB, indicating the involvement of an efflux system. These results were corroborated when verapamil, a P-gp inhibitor, was added to the Caco-2 model and increased the P_app AB of prodrug 12P by 3-fold. The prodrug 12P was stable in the BBMVs environment, yet degraded quickly (less than 5 min) in the plasma into the parent peptide 12. Pharmacokinetic studies in rats showed an increase in the bioavailability of peptide 12 > 70-fold (from 0.58 ± 0.11% to 43.8 ± 14.9%) after applying the LPCM method to peptide 12 and converting it to the prodrug 12P. To conclude, the LPCM approach converted the absorption mechanism of the polar peptides from a paracellular to transcellular pathway that tremendously affects their oral bioavailability. The LPCM method provides a solution for the poor bioavailability of RGD cyclohexapeptides and paves the way for other active hydrophilic and charged peptides with poor oral bioavailability.

Self-emulsifying drug–delivery systems modulate P-glycoprotein activity: role of excipients and formulation aspects

Self-emulsifying drug–delivery systems (SEDDS) have been widely employed to ameliorate the oral bioavailability of P-glycoprotein (P-gp) substrate drugs and to overcome multidrug resistance in cancer cells. However, the role of formulation aspects in the reduced P-gp activity is not fully understood. In this review, we first explore the role of various SEDDS excipients in the reduced P-gp activity with the main emphasis on the effective excipient concentration range for excipient-mediated modulation of P-gp activity and then we discuss the synergistic effect of various formulation aspects on the excipient-mediated modulation of P-gp activity. This review provides an approach to develop a rationally designed SEDDS to overcome P-gp-mediated drug efflux.

Food for thought: formulating away the food effect - a PEARRL review

OBJECTIVES

Co-ingestion of oral dosage forms with meals can cause substantial changes in bioavailability relative to the fasted state. Food-mediated effects on bioavailability can have significant consequences in drug development, regulatory and clinical settings. To date, the primary focus of research has focused on the ability to mechanistically understand the causes and predict the occurrence of these effects.

KEY FINDINGS

The current review describes the mechanisms underpinning the occurrence of food effects, sheds new insights on the relative frequency for newly licensed medicines and describes the various methods by which they can be overcome. Analysis of oral medicines licensed by either the EMA or FDA since 2010 revealed that over 40% display significant food effects. Due to altered bioavailability, these medicines are often required to be dosed, rather restrictively, in either the fed or the fasted state, which can hinder clinical usefulness.

SUMMARY

There are clinical and commercial advantages to predicting the presence of food effects early in the drug development process, in order to mitigate this risk of variable food effect bioavailability. Formulation approaches aimed at reducing variable food-dependent bioavailability, through the use of bio-enabling formulations, are an essential tool in addressing this challenge and the latest state of the art in this field are summarised here.

ω-3 Fatty Acid Synergized Novel Nanoemulsifying System for Rosuvastatin Delivery: In Vitro and In Vivo Evaluation

The present study was undertaken to improve rosuvastatin (RSV) bioavailability and pharmacological response through formation of SNES using Perilla frutescens oil as lipid carrier. The composition of oil was estimated by fatty acid methyl ester (FAME) analysis using gas chromatography. Solubility of RSV in Perilla frutescens oil and Cremophor EL was 25.0 ± 3.0 and 60.0 ± 5.0 mg/mL, respectively. Later, nanophasic maps and a central composite design were employed to determine the maximum nanoemulsion region and further optimize SNES in this study. Finally, the optimized formulation was evaluated in vitro and in vivo. FAME analysis revealed that PUFA content was 70.3% of total fatty acid. Optimized SNES formulation demonstrated particle size of 17.90 nm, dissolution 98.80%, cloud point 45°C, emulsification time 2 min, and viscosity 241.41 ± 5.52 cP. The hypolipidemic property of SNES was further explored using Triton X-100-induced hyperlipidemic rat model, and there were reductions of serum cholesterol, triglyceride, and LDL and VLDL levels in the SNES-treated group as compared to the toxic control. Pharmacokinetic study of SNES revealed significantly higher C _max (60.13 ± 25.43 ng/mL) and AUC_0-∞ (6195 ± 42.38 ng h/mL) vis-à-vis marketed tablet (284.80 ± 13.44 ng/mL, 3131.72 ± 51.93 ng h/mL, respectively). RSV was successfully incorporated into ω-3 fatty acid-based SNES with improved pharmacokinetic parameters (~ 2-fold improved bioavailability) and better hypolipidemic properties, owing to the synergistic effects of hepatic lipid regulation itself. The results clearly explicated that ω-3 fatty acid-based SNES effectively enhanced bioavailability and pharmacological responses of RSV, suggesting that these formulations may be useful as alternative for hyperlipidemia treatment in future drug design perspective.

The Effect of Piperine Pro-Nano Lipospheres on Direct Intestinal Phase II Metabolism: The Raloxifene Paradigm of Enhanced Oral Bioavailability

Phase II biotransformation reactions have been gaining more attention due to their acknowledged significance in drug bioavailability, drug development, and drug-drug interactions. However, the predominant role of phase I metabolism has always overshadowed phase II metabolism, resulting in insufficient data regarding its mechanisms. In this paper, we investigate the effect of an advanced lipid based formulation on the phase II metabolism process of glucuronidation, occuring in the enterocytes monolayer. The investigated formulation is a self-emulsifying drug delivery system, termed pro-nano lipospheres, which contains the natural absorption enhancer piperine. To evaluate the effect of this formulation on direct glucuronidation we chose the model molecule raloxifene. First, glucuronidation is the main clearance pathway of this compound without involvement of preceding mechanisms. Second, raloxifene's extensive glucuronidation site is primarily at the intestine. Raloxifene's oral bioavailability was determined in a series of pharmacokinetic experiments using the freely moving rat model. In order to test the effect of the formulation on the relevant UGT enzymes reported in the clinic, we used the in vitro method of UGT-Glo Assay. Coadministration of raloxifene and piperine pro-nano lipospheres to rats resulted in a 2-fold increase in the relative oral bioavailability of raloxifene. However, coadministration of raloxifene with blank pro-nano lipospheres had no effect on its oral bioavailability. In contrast to the difference found in vivo between the two vehicles, both formulations extended an inhibitory effect on UGT enzymes in vitro. Ultimately, these findings prove the ability of the formulation to diminish intestinal direct phase II metabolism which serves as an absorption obstacle for many of today's marketed drugs. Pro-nano lipospheres is a formulation that serves as a platform for the simultaneous delivery of the absorption enhancer and a required drug. The discrepancy found between the in vivo and in vitro models demonstrates that the in vitro method may not be sensitive enough to distinguish the difference between the formulations.

Oral Delivery of Highly Lipophilic, Poorly Water-Soluble Drugs: Self-Emulsifying Drug Delivery Systems to Improve Oral Absorption and Enable High-Dose Toxicology Studies of a Cholesteryl Ester Transfer Protein Inhibitor in Preclinical Species

BMS-A is an inhibitor of cholesteryl ester transfer protein and is a highly lipophilic compound (clogP 10.5) with poor aqueous solubility (<0.0001 mg/mL at pH 6.5). The compound exhibits low oral exposure when dosed as cosolvent solution formulations. The purpose of this study was to evaluate lipid-based formulations for enabling high-dose toxicology studies and enhancing toxicology margins of BMS-A in preclinical studies in nonrodent species. The solubility of BMS-A was screened in lipid and cosolvent/surfactant excipients, and prototype formulations were developed. In vitro tests showed that fine/microemulsions were formed after aqueous dilution of lipid formulations, and BMS-A was transferred from oil phase to aqueous phase with enhanced solubility following lipid digestion. When dosed in dogs at 200 mg/kg, a Gelucire-based formulation exhibited more than 10-fold higher exposure compared to the solution formulation and was thus selected for toxicology studies in dogs. For monkeys, an olive oil formulation was developed, and the exposure was about 7-fold higher than that from the solution. In summary, lipid-based drug delivery could be applied in early stages of drug discovery to enhance oral exposure and enable preclinical toxicology studies of highly lipophilic compounds, while facilitating the candidate selection of a molecule which is more specifically designed for bioperformance in a lipid-based drug delivery strategy.