High adsorptive potential of calcined magnetic biochar derived from banana peels for Cu2+, Hg2+, and Zn2+ ions removal in single and ternary systems

Quaternized cross-linked peach gum polysaccharide as an adsorbent for fast and selective removal of anionic dyes from aqueous solution

To overcome low adsorption capacity, slow adsorption rate, poor adsorption selectivity, and dissolution of peach gum polysaccharide (PGP), an amino-rich crosslinked PGP (ACPGP) was first synthesized by cross-linking highly soluble PGP. Subsequently, a cation-rich PGP (QCPGP) was prepared from ACPGP through the addition of glycidyltrimethyl ammonium chloride (GTAC) and a secondary quaternization. The step-by-step preparation process was confirmed, and the adsorption properties of PGP, ACPGP, and QCPGP were compared in detail. The adsorption of crude PGP for cationic dyes violet (MV, 135.0 mg/g) and methylene blue (MB, 121.4 mg/g) were spontaneous endothermic, following the pseudo-first-order kinetic model and D-R isotherm. Due to the presence of rich charged groups in their structure, their highly selective adsorption towards new coccine (NC) and tartrazine (TTZ) is spontaneous and endothermic, and can be described by the pseudo-first-order and pseudo-second-order kinetic models, respectively. According to the Langmuir isotherm, the Qm of ACPGP and QCPGP for NC and TTZ was calculated to be 876.2 and 1304.3 mg/g (NC), and 814.5 and 1136.7 mg/g (TTZ), respectively. QCPGP exhibited more advantages in terms of adsorption capacity, adsorption rate (equilibrium time of 10 min), environmental stability, adsorption selectivity, and regeneration efficiency, showing great potential in practical wastewater treatment applications.

Recent advances and factors affecting the adsorption of nano/microplastics by magnetic biochar

The increase in nano/microplastics (NPs/MPs) from various everyday products entering aquatic environments highlights the urgent need to develop mitigation strategies. Biochar (BC), known for its excellent adsorption capabilities, can effectively target various harmful organic and inorganic pollutants. However, traditional methods involving powdered BC necessitate centrifugation and filtration, which can lead to the desorption of pollutants and subsequent secondary pollution. Magnetic biochar (MBC) offers a solution that facilitates straightforward and rapid separation from water through magnetic techniques. This review provides the latest insights into the progress made in MBC applications for the adsorption of NPs/MPs. This review further discusses how external factors such as pH, ionic strength, temperature, competing ions, dissolved organic matter, aging time, and particle size impact the MBC adsorption efficiency of MPs. The use of machine learning (ML) for optimizing the design and properties of BC materials is also briefly addressed. Finally, this review addresses existing challenges and future research directions aimed at improving the large-scale application of MBC for NPs/MPs removal.

Synthesis and application of SBA-15 adsorbent for the removal of organic and inorganic substances

This study investigates the adsorption of pollutants with different chemical structures; organic Naphtol Green B (NGB) dye and copper on a nanocomposite material with a hexagonal structure of the SBA-15 type. This research is divided into two main parts: the first carries out the synthesis of SBA-15 (Santa Barbra Amourphous) and its derivatives phases functionalized by 3-aminopropyl-triethoxylane (APTES) and calcined at 823 K. The second part presents the influence of the adsorption conditions on the adsorption efficiency of NGB dye and copper. High-resolution X-ray diffractogram (XRD) showed three distinct peaks characteristic of highly ordered mesoporous material. Nitrogen adsorption-desorption isotherm of SBA-15 at 77 K° is type IV typical of mesoporous materials. In addition, Fourier transform infrared spectroscopy (FT-IR) was also used in the characterization before and after the adsorption of the selected pollutants. At optimal conditions of pH 5.2, initial concentration of 50 mg/L, adsorbent dosage of 20 mg, and at adsorption time of 90 min the maximum removal of pollutants reached 76% and the adsorption capacity was 227.25 mg/g for NGB dye and 221.006 mg/g for copper. Furthermore, the adsorption kinetics followed the pseudo-second-order model, indicating that chemisorption was the dominant mechanism and the Sips isotherm model best described the adsorption data. Our research demonstrates that the SBA-15 material after modification is an effective adsorbent for removing effluents regardless of their different chemical structure (organic and inorganic).

Cyclodextrin-silica hybrid materials: synthesis, characterization, and application in pesticide aqueous removal

Introduction

Overusing and misusing pesticides, including paraquat (PQ), have led to numerous environmental contamination complications. PQ is an emerging bio-accumulative contaminant that is present in environmental aqueous matrices. Adsorption techniques are part of a set of technologies applied in ecological remediation, known for their high effectiveness in removing aqueous PQ. A study of the PQ adsorption capacity of three cyclodextrin-silica nanocomposites (α-CDSi, β-CDSi, and γ-CDSi) from contaminated waters is presented in this paper.

Methods

The cyclodextrin-silica nanocomposites were synthesized via an esterification reaction between the inorganic matrix and cyclodextrins (CDs) (α, β, and γ) and were characterized physicochemically by spectroscopic, thermal, and surface methods. Their PQ removal performance from contaminated aqueous media was studied under different experimental conditions.

Results and Discussion

The results showed a fast adsorptive response in removal treatment studies over time. Adsorption capacities of 87.22, 57.17, and 77.27 mg.g-1 were found for α-CDSi, β-CDSi, and γ-CDSi, respectively, at only 30 min of treatment. Thermodynamic studies indicated spontaneous and exothermic adsorption processes. The removal assays responded mainly to physisorption mechanisms with contributions from chemisorption mechanisms. Spectroscopic assays showed a strong interaction of PQ with the adsorbents used. Innovative CDSi nanocomposites have proven to be highly efficient in applying aqueous PQ remediation, thus proving to be sustainable adsorbents of contaminants of emerging importance worldwide.

Novel sulfonic groups grafted sugarcane bagasse biosorbent for efficient removal of cationic dyes from wastewater

In this research, we reported the synthesis of effective sulphonated sugarcane bagasse (SCB@SA) biosorbent based on agriculture waste materials via a simple diazotization strategy for the removal of methylene blue (MB) and Bismarck Brown R(BB) dyes from waste water samples. First, the sugarcane bagasse (SCB) waste was collected, grinded, and sieved to obtain the desired size. Secondly, the SCB powder is modified with sulfanilinic acid (SA) via the formation of its diazonium salt to introduce sulfonic groups on the SCB surface. Different advanced techniques were applied to characterize the prepared materials before and after the adsorption process viz. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Energy-dispersive X-ray spectroscopy (EDS) and Thermogravimetric analysis (TGA). Different parameters affecting the adsorption process of both MB and BB were studied. Because of the higher correlation coefficient (R2 ≥ 0.999) and lower error functions, the equilibrium MB and BB adsorption isotherms for a single-dye system fit Langmuir with maximum adsorption capacity reaching to 127.48 and 166.75 mg/g for MB and BB, respectively. Moreover, the RL values obtained for both dyes lie between 0 and 1, indicating that MB and BB adsorption by SCB@SA is a favorable process. Besides, the error functions' values of the pseudo-2nd-order are significantly lower than those of the pseudo-1st-order, implying that the adsorption MB and BB onto SCB@SA biosorbent fitted the pseudo-2nd-order kinetic model in a chemosorption manner. In the thermodynamic studies, the adsorption process is spontaneous, exothermic, and has less randomness. In addition, the SCB@SA biosorbent could be reused in five cycles maintaining on suitable adsorption efficiency. Finally, the MB and BB dyes could be adsorbed on the SCB@SA biosorbent via three mechanisms including π-π stacking, columbic attraction, and hydrogen bonding.

Investigation of performance of potential adsorbents for emissions mitigation in a diesel generator

Globally, the release of greenhouse gases primarily carbon dioxide (CO2) emissions to our Earth's surface has climbed by  about 45% to its present atmospheric concentration rate of 420 parts per million (ppm) during the industrial era. An unprecedented rise in atmospheric CO2 concentration has been claimed to lead to significant factors such as global warming potential (GWP) and climate change effects.  An increase in atmospheric CO2 concentrations is  a  serious threat to the environment. Recent research efforts have focused on mitigating emissions from anthropogenic point sources. Adsorption-based post-combustion CO2 capture using solid adsorbents is the most effective and efficient method for mitigating gas adsorption in the exhaust system. In the current study, activated carbons are obtained from three potential biomass, namely, (i) coconut shell, (ii) rice husk, and (iii) eucalyptus wood, through a - single-stage activation method. The prepared activated carbon materials are analyzed using proximate and ultimate analyses. Further investigations are performed using different characterization techniques to ensure their adsorption efficiency. Adsorbents are packed one after the other in an in-house fabricated double adsorption chamber and coupled to the exhaust unit of a generator. Test experiments are conducted to examine adsorbents' capture efficiency in emissions mitigation. Adsorbents' adsorption parameters are evaluated in experimental investigations. At 2.5 bar and 50 °C, a maximum loading capacity of samples is achieved by 4.85 mmol/g, 4.58 mmol/g, and 5.96 mmol/g for coconut shell, rice husk, and eucalyptus wood adsorbents, respectively. With a post-combustion carbon adsorption chamber, CO2 and NO are captured about 40-64% and 38-58%, respectively, for all three adsorbents. The thermodynamic parameter of isosteric heat of adsorption value is below 40 kJ/mol, ensuring physisorption for all adsorbents.

Highly efficient capture of mercury from complex water matrices by AlZn alloy reduction-amalgamation and in situ layered double hydroxide

Mercury pollution is a critical, worldwide problem and the efficient, cost-effective removal of mercury from complex, contaminated water matrices in a wide pH range from strongly acidic to alkaline has been a challenge. Here, AlZn and AlFe alloys are investigated and a new process of synergistic reduction-amalgamation and in situ layered double hydroxide (SRA-iLDH) for highly efficient capture of aqueous Hg(II) is developed using AlZn alloys. The parameters include the pH values of 1-12, the Hg(II) concentrations of 10-1000 mg L-1, and the alloy's Zn concentrations of 20%, 50% and 70% and Fe concentrations of 10%, 20% and 50%. The initial rate of Hg(II) uptake by AlZn alloys decreases with increasing Zn concentration while the overall rate is not affected. Specifically, AlZn50 alloy removes >99.5% Hg(II) from 10 mg L-1 solutions at pH 1-12 in 5 min at a rate constant of 0.055 g mg-1 min-1 and achieves a capacity of 5000 mg g-1, being the highest value reported so far. The super-performance of AlZn alloy is attributed to multiple functions of chemical reduction, dual amalgamation, in situ LDH's surface complexation and adsorption, isomorphous substitution and intercalation. This study provides a simple and highly efficient approach for removing Hg(II) from complex water matrices.

In-situ synthesis of ZIF-8 on magnetic pineapple leaf biochar as an efficient and reusable adsorbent for methylene blue removal from wastewater

The presence of organic dyes in aquatic systems poses a significant threat to ecosystems and human well-being. Due to recycling challenges, traditional commercial activated carbon is not cost-effective. To address this, an imidazolate acid zeolite framework-8 (ZIF-8)-modified magnetic adsorbent (ZMPLB-800) was synthesized through the in-situ formation of ZIF-8 and subsequent carbonization at 800 °C, using magnetic pineapple leaf biochar (MPLB) as a carrier. The porous structure of ZMPLB-800 facilitates the rapid passage of dye molecules, enhancing adsorption performance. ZMPLB-800 exhibited remarkable adsorption capacity for methylene blue (MB) across a pH range of 3-13, with a maximum adsorption capacity of 455.98 mg g-1. Adsorption kinetics and thermodynamics followed the pseudo-second-order kinetic model and Langmuir isotherm model. Mechanisms of MB adsorption included pore filling, hydrogen bonding, electrostatic interactions, π-π interactions, and complexation through surface functional groups. Additionally, ZMPLB-800 demonstrated excellent regeneration performance, recording a removal efficiency exceeding 87% even after five adsorption/desorption cycles. This study provides a novel strategy for treating dye wastewater with MOF composites, laying the foundation for waste biomass utilization.

Advances in Fe-modified lignocellulosic biochar: Impact of iron species and characteristics on wastewater treatment

Lignocellulosic biomass is an attractive feedstock for biochar production owing to its high abundance and renewability. Various modified biochars have been extensively studied for wastewater treatment to improve the physical and chemical properties of lignocellulosic biochar (L-BC). Particularly, Fe-modified L-BCs have garnered attention owing to the abundance and eco-friendliness of Fe and the outstanding ability to remove various organic and inorganic contaminants via adsorption, oxidation, reduction, and catalytic reactions. Different iron species (e.g., Fe(0), Fe (hydr)oxide, Fe sulfide, and Fe-Metal) are formed during the preparation of Fe-L-BCs, which can completely differentiate the physical and chemical properties of BCs. This review discusses the advances in the synthesis of different Fe-L-BCs, specific changes in the physical and chemical properties of Fe-L-BCs upon Fe addition, and their impacts on wastewater treatment. The results of this review can demonstrate the unique advantages and drawbacks of Fe-L-BCs for the removal of different types of pollutants.

Fabrication of two novel amino-functionalized and starch-coated CuFe2O4-modified magnetic biochar composites and their application in removing Pb2+ and Cd2+ from wastewater

Novel magnetic biochar composites (SFeCu@SBCO and FeCu@SBCO-NH2) were fabricated by modifying oxidized sawdust biochar (SBCO) with Fe/Cu loading, starch-coating/amination, characterized (FTIR, XRD, BET, SEM-EDS and XPS) and applied in capturing Pb2+ and Cd2+ from wastewater. Adsorption experiments revealed that SFeCu@SBCO and FeCu@SBCO-NH2 exhibited extraordinary adsorption performance toward Pb2+/Cd2+ with the maximum adsorption capacity reaching 184.26/173.35 mg g-1 and 201.43/190.81 mg g-1, respectively, which were >5 times higher than those of SBC. The great increase in adsorption capacity of the two adsorbents was ascribed to the introduction of CuFe2O4 and starch/amino groups. Pb2+ and Cd2+ adsorption was an endothermic reaction controlled by monolayer chemisorption. Complexation and electrostatic attraction were the two predominant mechanisms. Besides, ion exchange together with physical adsorption also occurred during the adsorption. Additionally, the both adsorbents displayed favorable stability and reusability as well as desirable anti-interfering ability to other metal cations. Taken together, the both adsorbents could be utilized as reusable magnetic adsorbents with promising prospect in the effective remediation of Pb2+/Cd2+ contaminated water. The study not only contributed to the better understanding of biochar modification strategy and the application of modified biochar in heavy metals pollutants removal, but also realized resource utilization of biomass waste.

Novel amino-modified bamboo-derived biochar-supported nano-zero-valent iron (AMBBC-nZVI) composite for efficient Cr(VI) removal from aqueous solution

Biochar-supported nano-zero-valent iron (BC-nZVI) composites have been extensively investigated for the treatment of Cr(VI)-containing wastewater. However, the inherent oxygen-containing groups with negative charges on BC exhibit electrostatic repulsion of the electronegative Cr(VI) species, limiting Cr(VI) removal. To overcome this limitation, this study prepared and used amino-modified bamboo-derived BC (AMBBC) as a supporting matrix to synthesize a novel AMBBC-nZVI composite. The amino groups (-NH2) on AMBBC were easily protonated and transformed into positively charged ions (-NH3+), which favored the attraction of Cr(VI) to AMBBC-nZVI, enhancing Cr(VI) removal. The experimental results demonstrated that the Cr(VI) removal efficiency of AMBBC-nZVI was 95.3%, and that of BBC-nZVI was 83.8% under the same conditions. The removal of Cr(VI) by AMBBC-nZVI followed the pseudo-second-order kinetic model and Langmuir isotherm model and was found to be a monolayer chemisorption process. Thermodynamic analysis revealed that the Cr(VI) removal process was spontaneous and endothermic. The mechanism analysis of Cr(VI) removal indicated that under an acidic condition, the -NH3+ groups on AMBBC adsorbed the electronegative Cr(VI) species via electrostatic interaction, promoting the attachment of Cr(VI) on AMBBC-nZVI; the adsorbed Cr(VI) was then reduced to Cr(III) by Fe0 and Fe(II), accompanied by the formation of Fe(III); moreover, AMBBC allowed the electron shuttle of nZVI to reduce Cr(VI); finally, the Cr(III) and Fe(III) species deposited on the surface of AMBBC-nZVI as Cr(III)-Fe(III) hydroxide coprecipitates.

Strategic use of crop residue biochars for removal of hazardous compounds in wastewater

Crop residues are affordable lignocellulosic waste in the world, and a large portion of the waste has been burned, releasing toxic pollutants into the environment. Since the crop residue is a carbon and ingredient rich material, it can be strategically used as a sorptive material for (in)organic pollutants in the wastewater after thermo-chemical valorization (i.e., biochar production). In this review, applications of crop residue biochars to adsorption of non-degradable synthetic dyes, antibiotics, herbicides, and inorganic heavy metals in wastewater were discussed. Properties (porosity, functional groups, heteroatom, and metal(oxide)s, etc.) and adsorption capacity relationships were comprehensively reviewed. The current challenges of crop residue biochars and guidelines for development of efficient adsorbents were also provided. In the last part, the future research directions for practical applications of the crop residue biochars in wastewater treatment plants have been suggested.

Alginate-based porous polyHIPE for removal of single and multi-dye mixtures: Competitive isotherm and molecular docking studies

A novel hydrophilic porous alginate-based polyHIPE (AGA) was synthesized via an oil-in-water emulsion templating approach. AGA was used as an adsorbent for removing methylene blue (MB) dye in single- and multi-dye systems. BET, SEM, FTIR, XRD, and TEM were used to characterize AGA to elucidate its morphology, composition and physicochemical properties. According to the results, 1.25 g/L AGA adsorbed 99 % of 10 mg/L MB in 3 h in a single-dye system. The removal efficiency decreased to 97.2 % in the presence of 10 mg/L Cu2+ ions and 40.2 % when the solution salinity increased to 70 %. In a single-dye system, the experimental data do not match well with the Freundlich isotherm, pseudo-first order, and the Elovich kinetic model, however, in a multi-dye system, it fit well with both extended Langmuir and the Sheindorf-Rebhun-Sheintuch. Notably, AGA removed 66.87 mg/g in a dye solution containing only MB, whereas 50.14-60.01 mg/g adsorption of MB was accomplished in a multiple-dye system. According to the molecular docking analysis, the dye removal process involved chemical bonds between the functional groups of AGA and the dye molecules, hydrogen bonds, hydrophobic and electrostatic interactions. The overall binding score of MB decreased from -26.9 kcal/mol in a single-dye system to -18.3 kcal/mol in a ternary system.

Adsorption Characteristics of Heavy Metals Pb2+ and Zn2+ by Magnetic Biochar Obtained from Modified AMD Sludge

Acid mine drainage (AMD) sludge can be used to prepare adsorbent materials for the removal of heavy metals in water, which is an effective means for its resource utilization. Magnetic modified biochar (MMB), which can be recovered by magnetic separation, was prepared from sludge generated from the carbonate rock neutralization treatment of AMD and rice straw agricultural waste. Unmodified biochar (UMB) was obtained from rice straw and chemically modified and treated by ultraviolet radiation to produce MMB. The Pb²⁺ and Zn²⁺ adsorption capacities of UMB and MMB were investigated. Simultaneously, the materials were characterized by SEM, FTIR, BET, and ZETA. The results showed that the specific surface area (130.89 m²·g^-1) and pore volume (0.22 m²·g^-1) of MMB were significantly increased compared to those of UMB (9.10 m²·g^-1 and 0.05 m²·g^-1, respectively). FTIR images showed that MMB was successfully loaded with Fe₃O₄. The adsorption process of Pb²⁺ and Zn²⁺ onto MMB was consistent with the Langmuir adsorption isotherm and second-order kinetic models, with maximum adsorption capacities of 329.65 mg·g^-1 and 103.67 mg·g^-1, respectively. In a binary system of Pb²⁺ and Zn²⁺, MMB preferentially binds Pb²⁺. The adsorption efficiencies of MMB reached >80% for Pb²⁺ and Zn²⁺.

Effective remediation of Pb2+ polluted environment by adsorption onto recyclable hydroxyl bearing covalent organic framework

The removal of heavy metal ions from wastewater has attracted considerable interest because of their toxicity. Adsorption is one of the most promising methods for the removal of heavy metal ions due to its simplicity and effectiveness. Recently, covalent organic frameworks (COFs) have become promising adsorbents for effective wastewater remediation. However, many building blocks have been developed, and the design of COFs with high adsorption efficiency remains a challenge. Here, a covalent organic framework (DHTP-TPB COF) decorated with hydroxyl groups was developed for the efficient removal of Pb²⁺ ions. The DHTP-TPB COF showed excellent performance in adsorbing Pb²⁺ from aqueous solution. More importantly, DHTP-TPB COF exhibited high selectivity for Pb²⁺ compared to other competing ions, capturing Pb²⁺ ions with a removal efficiency of over 96% at pH 4. The results show that the DHTP-TPB COF exhibits excellent adsorption capacity at pH 4 of up to 154.3 mg/g for Pb²⁺ ions; the value is comparable to many previously reported COFs. Moreover, the adsorbed Pb²⁺ ions could be easily eluted with a 0.1 M EDTA solution, and the DHTP-TPB COF can be reused for more than five adsorption-desorption cycles without significant loss of adsorption capacity. Moreover, the adsorption mechanism was revealed using XPS analysis, indicating the formation of strong coordination-bonding interactions between hydroxyl and Pb²⁺ ions. Therefore, the DHTP-TPB COF prepared herein has high potential for the treatment of Pb²⁺-contaminated wastewater and is promising for the adsorption of Pb²⁺ ions in practical applications.

Magnetic reed biochar materials as adsorbents for aqueous copper and phenol removal

Organics and heavy metals are common pollutants in many wastewaters and water bodies. Adsorption processes by magnetic materials can rapidly remove these pollutants from water and effectively recycle adsorbent. In this study, magnetic analyzer, X-ray diffraction, Flourier transform infrared spectroscopy, and granulometry were used to characterize the synthesized magnetic reed biochar materials (ZnFe₂O₄/biochar). Influences of adsorption time, pH, temperature, initial solution concentration, and adsorption equilibrium concentration on adsorption performances were investigated for Cu²⁺ and phenol adsorption by ZnFe₂O₄/biochar. Adsorption kinetic and isotherm models were used to describe the adsorption processes. Adsorption of phenol and Cu²⁺ by ZnFe₂O₄/biochar reached saturation within 45 min and increased slightly with the increase of temperature from 15 to 45 °C. Adsorption of Cu²⁺ increased with the increase of pH, while the adsorption of phenol peaked at pH = 6. The adsorption processes fit the pseudo-second order kinetics model, and both conformed to the Langmuir model. The fitting results show that the maximum single-component adsorption capacity of phenol and Cu²⁺ by ZnFe₂O₄/biochar is 63.29 and 12.20 mg/g, and the maximum bi-component adsorption capacity reaches 40.16 and 9.48 mg/g, respectively. All the findings demonstrate that ZnFe₂O₄/biochar has good adsorption performance for phenol and Cu²⁺.

Efficient Remediation of Cadmium- and Lead-Contaminated Water by Using Fe-Modified Date Palm Waste Biochar-Based Adsorbents

Heavy metals pollution of water resources is an emerging concern worldwide and seeks immediate attention. Date palm waste was transformed into biochar (BC), which was further modified through Fe-intercalation for the production of magnetic biochar (Fe-BC) in this study. The produced BC and Fe-BC were analyzed for chemical, proximate, surface, and elemental composition. The efficiency of the produced adsorbents to decontaminate the water from Cd²⁺ and Pb²⁺ ions was investigated through kinetics and an isotherm adsorption batch trial. Kinetics adsorption data fit well with the pseudo-second order and power function model, while equilibrium data were described well with the Langmuir and Freundlich isotherms. The maximum adsorption capacity as shown by the Langmuir model was the highest for Fe-BC for both Cd²⁺ (48.44 mg g^-1) and Pb²⁺ (475.14 mg g^-1), compared with that of BC (26.78 mg g^-1 Cd²⁺ and 160.07 mg g^-1 Pb²⁺). Both materials showed higher removal of Pb (36.34% and 99.90% on BC and Fe-BC, respectively) as compared with Cd (5.23% and 12.28% on BC and Fe-BC, respectively) from a binary solution. Overall, Fe-BC was more efficient in adsorbing both of the studied metals from contaminated water. The application of Fe-BC resulted in 89% higher adsorption of Cd²⁺ and 197% higher adsorption of Pb²⁺ from aqueous media as compared to BC. Kinetics and isotherm models as well as SEM-EDS analysis of the post-adsorption adsorbents suggested multiple adsorption mechanisms including chemisorption, pore-diffusion, and electrostatic interactions.

Optimization of preparation conditions of a novel low-cost natural bio-sorbent from olive pomace and column adsorption processes on the removal of phenolic compounds from olive oil mill wastewater

Olive oil mill wastewater (OMWW) poses an undeniable environmental problem due to its high organic loads and phenolic compound (PC) content. This study determined the optimal conditions for preparing a new bio-sorbent from olive pomace (OP) and the adsorptive treatment of OMWW by this bio-sorbent. The activation reaction was performed with hydrogen peroxide. The results of the combination effect optimization of the three preparation variables, the activation temperature (°C) X₁, the activation time (min) X₂, and the impregnation ratio X₃, are presented by the response surface methodology (RSM). The maximum adsorption capacity was obtained at an activation time of 240 min, a temperature of 80 °C, and a ratio equal to 6.2:1. The bio-sorbent was characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and X-ray diffractometer (XRD). The adsorption process performance of this bio-sorbent was examined in batch (phenol solution) and fixed-bed columns (real effluent of OMWW). An adsorption capacity of 789.28 mg g^-1 and 643.92 mg g^-1 has been achieved for 4000 mg L^-1 concentration of PCs, respectively, for batch and fixed-bed column essays. The adsorption isotherm and kinetics were consistent with the Langmuir and pseudo-second-order models. Therefore, the Thomas model best fits the fixed-bed column experimental data. The bio-sorbent gave a high desorption percentage of PCs, which was above 60% using HCl (0.1M).

Water-based Fe3O4 magnetic fluid-coated Aspergillus niger spores for treating liquid contaminated with Cr(VI)

The use of magnetic biosorbents for the remediation of heavy metals has attracted increasing attention due to their ease of separation and reusability. We developed a method for preparing superparamagnetic biosorbent materials using water-based magnetic fluids. Water-based magnetic fluid-spores (WMFSs) were obtained by combining water-based magnetic fluid (WMF) with Aspergillus niger spores at ratios of 0.6:1 (WMFS1), 0.8:1 (WMFS2), 1:1 (WMFS3), 1.2:1 (WMFS4), and 1.4:1 (WMFS5). A magnetic composite material was prepared from magnetic nanoparticles and spores in a ratio of 1:1 as a control. The adsorption efficiency and separation effect of WMFS3 were significantly better than those of the magnetic composite material. The morphology and structure of WMFS3 were characterized by performing transmission electron microscopy. The results showed that Fe₃O₄ magnetic particles were uniformly coated on the spore surface. The superparamagnetism of WMFS3 was tested using a vibrating sample magnetometer. At pH 2.0, the maximum adsorption capacity of WMFS3 for Cr(VI) was 105 mg/g; in the pH range of 2.0-3.0, the adsorption equilibrium time of WMFS3 was 60 min. Thus, the adsorption process conformed to the pseudo-second-order kinetic model and Freundlich isotherm. Thermodynamic studies showed that the process was spontaneous and endothermic. The adsorption mechanisms of WMF3 for Cr(VI) included electrostatic, reduction, and complexation adsorption. This biosorbent material showed excellent adsorption performance for Cr(VI) and is promising for wastewater resource applications.

Remediation of heavy metal polluted waters using activated carbon from lignocellulosic biomass: An update of recent trends

The use of a cheap and effective adsorption approach based on biomass-activated carbon (AC) to remediate heavy metal contamination is clearly desirable for developing countries that are economically disadvantaged yet have abundant biomass. Therefore, this review provides an update of recent works utilizing biomass waste-AC to adsorb commonly-encountered adsorbates like Cr, Pb, Cu, Cd, Hg, and As. Various biomass wastes were employed in synthesizing AC via two-steps processing; oxygen-free carbonization followed by activation. In recent works related to the activation step, the microwave technique is growing in popularity compared to the more conventional physical/chemical activation method because the microwave technique can ensure a more uniform energy distribution in the solid adsorbent, resulting in enhanced surface area. Nonetheless, chemical activation is still generally preferred for its ease of operation, lower cost, and shorter preparation time. Several mechanisms related to heavy metal adsorption on biomass wastes-AC were also discussed in detail, such as (i) - physical adsorption/deposition of metals, (ii) - ion-exchange between protonated oxygen-containing functional groups (-OH, -COOH) and divalent metal cations (M²⁺), (iii) - electrostatic interaction between oppositely-charged ions, (iv) - surface complexation between functional groups (-OH, O^2-, -CO-NH-, and -COOH) and heavy metal ions/complexes, and (v) - precipitation/co-precipitation technique. Additionally, key parameters affecting the adsorption performance were scrutinized. In general, this review offers a comprehensive insight into the production of AC from lignocellulosic biomass and its application in treating heavy metals-polluted water, showing that biomass-originated AC could bring great benefits to the environment, economy, and sustainability.

Simultaneous adsorption of toxic metals in binary systems using peanut and sheanut shells biochars

Converting peanut and sheanut shells into biochar is a smart strategy for recycling agricultural waste. Biochar was produced from peanut and sheanut shells at temperatures of 350 ± 5 °C and 700 ± 5 °C. The adsorption capacities for lead (Pb²⁺), cadmium (Cd²⁺) and mercury (Hg²⁺) in the binary systems were evaluated. In the binary systems with concentrations of 5 : 5 mg/L, 10 : 10 mg/L, 25 : 25 mg/L and 50 : 50 mg/L the removal efficiencies of GB350, SB350, GS350, GB700, SB700 and GS700 were 100% for Pb²⁺ and 88.70%–99.46% for Cd²⁺, 98.20%–100% for Pb²⁺ and 100% for Hg²⁺, 79.30%–100% for Cd²⁺ and 99.96%–100% for Hg²⁺. The higher adsorption percentages of Pb²⁺, Cd²⁺ and Hg²⁺ by the biochar in the binary systems indicated that the pH values of the solutions were good and suitable for adsorption. The biochar from peanut and sheanut shells showed excellent capacity to remove Pb, Cd and Hg in the binary systems. The Langmuir model (0.3351 ≤ R² ≤ 0.9901) was more suitable than the Freundlich model (0.0014 ≤ R² ≤ 0.9994) for the adsorption of toxic metal ions onto the biochar in the binary systems. The interactive effects of the binary mixtures in the aqueous solution of Pb²⁺, Cd²⁺, and Hg²⁺ were found to be either antagonistic or synergistic. Peanut and sheanut shell biochar were rich in calcium, potassium, magnesium, and sodium, and phosphates affected the mechanisms of Pb and Cd adsorption. The high sulphur content might have influenced the mechanism of Hg adsorption in the aqueous solutions on peanut and sheanut shell biochar. These results suggest that peanut and sheanut shell biochar have enormous potential and are suitable for adsorption of Pb²⁺, Cd²⁺ and Hg²⁺ in wastewater and polluted soil. Therefore, their effectiveness should be further tested in an actual water polluted environment.

Efficient removal of antibiotic in single and binary mixture of nickel by electrocoagulation process: Hydrogen generation and cost analysis

In discharged water, antibiotics and heavy metals frequently coexist, forming stable and recalcitrant complexes. Environmental concerns about how to efficiently treat this type of pollution are growing. Using Fe and Al electrodes, electrocoagulation (EC) was applied to remove tetracycline (TC) as a single pollutant as well as TC-nickel ions in a binary mixture from water. The effects of critical variables and the TC-Ni molar ratio (1:1, 1:2, and 2:1) were studied. The Fe electrode achieved 99.3% TC removal after 60 min in a single pollutant system containing 15 mgL^-1 of TC, while the Al electrode achieved 99.8% removal in 20 min at optimal conditions. The EC process demonstrated excellent electrodegradation efficiency towards TC-Ni complexes. When the TC to Ni²⁺ ratio was 1:1 and 1:2, respectively, TC elimination was 100% in 10 min and 99.6% in 20 min. We noted that a sufficient amount of Ni²⁺ could increase TC decomposition by electrocatalysis. The amount of hydrogen gas produced after treatment of a 0.2 L TC solution alone is 22.2-13.99 mol m^-3, whereas it was 27.2-40.8 mol m^-3 in the TC-Ni binary mixture, which can generate more than 35% of the electrical energy needed to power the EC system. To evaluate the generated sludge, FTIR analysis was performed.

Biochars and activated carbons as adsorbents of inorganic and organic compounds from multicomponent systems - A review

Biochars are obtained by biomass pyrolysis, whereas activated carbon is a biochar that has undergone chemical or physical activation. Owing to the large surface area and easy surface modification both solids are widely applied as adsorbents. They are low-costs materials, they could be regenerated and their disposal is not troublesome. Adsorption of heavy metals, dyes, pharmaceuticals on the surface of biochars and activated carbons, from simple systems of adsorbate containing only one compound, are described extensively in the literature. The present paper provides an overview of reports on adsorption of inorganic and organic compounds onto these two types of adsorbents from the mixed adsorbate systems. The described adsorbate systems have been divided into those consisting of: two or more inorganic ions, two or more organic compounds and both of them (inorganic and organic ones). The research of this type is carried out much less frequently due to the more complicated description of interactions in the mixed adsorbate systems.

Enhanced adsorption of metal ions onto Vetiveria zizanioides biochar via batch and fixed bed studies

The study highlights the potential of Vetiveria Zizanioides derived biochar for heavy metal removal in multicomponent systems. Biochar efficiency varies with pH, metal ion concentration and residence time. Maximum removal efficiency was found to be 66.34, 67.23, 46.54, 69.92, 68.23 and 63.34% for Arsenic, Copper, Nickel, Cadmium, Lead and Chromium at 90 min respectively. Ternary system revealed that Copper ions have inhibitory effect on Lead ions and have lower adsorption capacity than binary system. Multicomponent isotherm model was used to analyse simultaneous adsorption of metal ions and shows a good fit with modified Langmuir model for binary and ternary systems. Fixed-bed column was tested for scale-up feasibility and maximum adsorption capacity of 139, 130, and 123 mg/g for Lead, Copper, and Nickel ions were obtained at 1.5 L/h and a bed height of 12 cm. In fixed bed column, multicomponent sequence provides more protection against premature exhaustion of biochar.

Adsorption-Desorption Surface Bindings, Kinetics, and Mass Transfer Behavior of Thermally and Chemically Treated Great Millet Husk towards Cr(VI) Removal from Synthetic Wastewater

This study reports the efficacy of adsorbents synthesized by thermal (TT-GMH) and chemical (CT-GMH) modification of great millet husk (GMH) for the treatment of synthetic wastewater containing Cr(VI). The chemical modification of raw GMH was done by concentrated H2SO4 to increase the porosity and heterogeneity on the surface. The comparative investigations of physicochemical properties of synthesized adsorbents were examined by point of zero charge (pHpzc), BET surface area, SEM-EDX, FTIR, and XRD analyses. The results revealed that CT-GMH had around three times higher surface area and more porous structure as compared to TT-GMH. The adsorption experiments were executed in batch mode to examine the impact of parameters governing the adsorption process. For Cr(VI) solution of 25 mg/L, adsorbent dose of 4 g/L, temperature of 25 ${}^{°}\text{C}$ , and shaking speed of 150 RPM, the maximum removal for TT-GMH was attained at pH 1 and contact time 150 min, while for CT-GMH, maximum removal was attained at pH 2 and contact time 120 min. The experimental results fitted to the rate kinetic equations showed that for both TT-GMH and CT-GMH, adsorbents followed the quasi-second-order kinetic model during the adsorption process. Further, results revealed that the adsorption process was endothermic and Sips isotherm model was followed for both TT-GMH and CT-GMH. Based on the Sips isotherm, maximum uptake capacity for TT-GMH and CT-GMH was noted to be 16 and 22.21 mg/g, respectively. Among the tested mass transfer models, liquid film diffusion model was followed during the adsorption process of both the adsorbents. The desorption study revealed that TT-GMH and CT-GMH give 69.45% and 74.48% removal, respectively, up to six cycles.

Simultaneous adsorptive removal of conventional and emerging contaminants in multi-component systems for wastewater remediation: A critical review

The rapid growth of population and industrialization results in pollution of freshwater sources which leads to the water stress conditions on the world in future. Adsorption is a low cost and popular technique for the removal of contaminants from water bodies. Most of the reports till date are on removal of a single component from aqueous solutions using this technique, but the real-world effluent contains multiple contaminants such as dyes, heavy metals, pesticides, antibiotics and many more. Therefore, a study on simultaneous removal of contaminants is highly needed to obtain a suitable adsorbent that can be used commercially. This critical review provides a detailed study on the removal of contaminants in the presence of other contaminant/s i.e., from a multi-component system (MCS). The different possible interaction mechanisms in MCS like synergism, antagonism and non-interaction are discussed. The MCS containing the mixture of conventional contaminants such as heavy metals and dyes, and other emerging contaminants such as antibiotics, organic contaminants, pesticides and personal care products are explained in depth. This review article will be helpful for researchers working in the field of simultaneous removal of contaminants from MCSs for wastewater remediation.

Engineered Magnetic Carbon-Based Adsorbents for the Removal of Water Priority Pollutants: An Overview

This review covers the preparation, characterization, and application of magnetic adsorbents obtained from carbon-based sources and their application in the adsorption of both inorganic and organic pollutants from water. Different preparation routes to obtain magnetic adsorbents from activated carbon, biochar, hydrochar, graphene, carbon dots, carbon nanotubes, and carbon nanocages, including the magnetic phase incorporated on the solid surface, are described and discussed. The performance of these adsorbents is analyzed for the removal of fluoride, arsenic, heavy metals, dyes, pesticides, pharmaceuticals, and other emerging and relevant water pollutants. Properties of these adsorbents and the corresponding adsorption mechanisms have been included in this review. Overall, this type of magnetic adsorbents offers an alternative for facing the operational problems associated to adsorption process in water treatment. However, some gaps have been identified in the proper physicochemical characterization of these adsorbents, the development of green and low-cost preparation methods for their industrial production and commercialization, the regeneration and final disposal of spent adsorbents, and their application in the multicomponent adsorption of water pollutants.

Exceptional adsorption of different spectral indices of natural organic matter (NOM) by using cerium oxide nanoparticles (CONPs)

In this study, the efficiency of cerium oxide nanoparticles (CONPs) was examined for the adsorptive removal of various spectral indices of Natural Organic Matter (NOM). Two methods, viz. efficient microwave combustion (ECM) and hydroxide mediated approach (HMA), were used to synthesize CONPs. The developed materials were characterized by the field emission scanning electron microscope (FESEM) with energy dispersive X-ray (EDX) and the Fourier transform infrared spectroscopy (FTIR). Moreover, the X-ray powder diffraction (XRD) confirmed the cubic structure with an average crystal size of 20.16 nm (CONP-I) and 6.75 nm (CONP-II). The observed point of zero (pH_PZC) charge was approximately 7.0. The enhanced BET surface area (85.43 m²/g, 78.59 m²/g) and pore volume (0.007310 cm³/g, 0.006761 cm³/g) of CONPs support the higher adsorption. The effect of operational parameters (pH, contact time, and adsorbent dosage) and thermodynamical aspects of adsorption was also investigated. The Temkin isotherms described the experimental data better, with a maximum adsorption capacity of 238.9 mg/g (CONP-I) at neutral pH. Further, the experimental data can better be modeled by the pseudo-second-order kinetics (R², 0.9851). Overall, CONPs possess great efficiency for the simultaneous removal of DOC (94%), UV₂₅₄ (93%), adsorption slop index (ASI) (95%), phenolic content (88%), and carboxylic content (73%).

Characteristics, adsorption behaviors, Cu(II) adsorption mechanisms by cow manure biochar derived at various pyrolysis temperatures

With the aims of exploring the effectiveness of Cu(II) adsorption performed by cow manure biochars (CMBCs) for the treatment and recycling of livestock wastes, the physicochemical characteristics and Cu(II) adsorption behaviors of CMBCs at various pyrolysis temperatures (T) were analyzed. CMBCs displayed surface heterogeneity and the dominant Cu(II) adsorption reactions were chemical adsorption, including mineral co-precipitation and cations exchange, was account for 93.75% - 97.01% of the adsorption contribution. Pearson correlation analysis and quantitative analysis showed that the adsorption capacity of co-precipitation (Q_cp) and cations exchange (Q_ci) were significantly positively correlated with ash content and cations exchange capacity (p < 0.01), respectively. The quantitative relationships between total adsorption capacity (Q_t), Q_cp or Q_ci and T are Q_t = 54.01 + 0.39exp(0.0051 T), Q_cp = 71.80-101.91exp(-0.0024 T), Q_ci = 12.25 + 311.73exp(-0.0093 T) and Q_t = 0.93 Q_ci + 0.91 Q_cp + 7.70.

Hybrid MnFe-LDO-biochar nanopowders for degradation of metronidazole via UV-light-driven photocatalysis: Characterization and mechanism studies

A cost-competitive MnFe-LDO-biochar hybrid catalyst was successfully synthesized via a simple yet efficient technique for the decomposition of metronidazole (MZ). MnFe-LDO-biochar was characterized by various techniques and the results revealed that it has a bandgap of 2.85 eV, high photocurrent response of 3.8 μA cm^-2 and can be separated rapidly from the bulk solution by an external magnet due to its saturation magnetization of 28.5 emu g^-1. Initially, in the dark condition, 20% of MZ was removed after 30 min when 20 mg L^-1 MZ solution was treated with 50 mg MnFe-LDO-biochar in the presence of 6 mM H₂O₂. The MZ degradation increased remarkably to ∼98% upon exposure to a UV light for 60 min. Under various processes, UV/MnFe-LDO-biochar/H₂O₂ presented high degradation rate constant of 0.226 min^-1 and lowest energy consumption cost of 0.38$ at 7.56 kWh m^-3 which is ∼13 times lower than the degradation of MZ by the photolytic process under similar conditions. The MZ photocatalytic decomposition trend revealed a multiprocess mechanism influenced majorly by ^•OH and partly by h⁺ and ^•O₂^-. Note that in MnFe-LDO-biochar/UV system; 5% of MZ degradation was observed after 120 min and reached 13% after 300 min. MnFe-LDO-biochar maintained ∼88% reuse efficiency after three consecutive recycling tests.

Adsorptive removal of heavy metals from battery industry effluent using MOF incorporated polymeric beads: A combined experimental and modeling approach

In this study, the metal organic framework (MOF) ZIF-8 was investigated as potential adsorbent for heavy metal ions. The MOF powder was used further to prepare mixed matrix beads (MMBs) using polysulfone as the base material. Both the MOF powder and the MMBs were characterized using Field emission scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, Brunauer-Emmett-Teller (BET) analyzer and zetasizer. Adsorption capacity of the MMBs were 164-220 mg/g for Pb and 92-161 mg/g for Cd. A fundamental pore diffusion-adsorption model was used to predict the batch kinetics for both single and multicomponent cases and effective pore diffusivities and mass transfer coefficients were determined. Mutual interactions among heavy metals were quantified using interaction parameters. ZIF-8, incorporated in the PSF matrix, plays the predominant role in capturing the metal ions through surface complexation with the NH and metal-OH groups. A first principle-based model involving convection, diffusion and adsorption was used to quantify the breakthrough behavior for the continuous fixed bed column using the MMBs. The column performance was tested with battery industry effluent. The saturated beads were suitably regenerated using 0.1(M) HCl solution. Finally, the model parameters were used for scaling up of the columns.

EDTAD-modified cassava stalks loaded with Fe3O4: highly efficient removal of Pb2+ and Zn2+ from aqueous solution

In this study, a novel magnetic cassava stalk composite (M-EMCS) was prepared through modification with ethylenediamine tetraacetic anhydride (EDTAD) and loading of Fe₃O₄. The surface morphology, molecular structure, and magnetic characteristics of the composite were characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), vibrating-sample magnetometer (VSM), and X-ray diffraction (XRD). It was shown that EDTAD and Fe₃O₄ were successfully modified and loaded in cassava straw (CS), respectively. The capacity of M-EMCS to absorb heavy metals under different influencing factors was tested by atomic absorption spectroscopy. The adsorption processes of both Pb²⁺ and Zn²⁺ were suitably described by second-order kinetic models and Langmuir models, indicating monolayer chemisorption. M-EMCS had high adsorption rates and adsorption capacities for these two metal ions. The adsorption of Pb²⁺ and Zn²⁺ reached a plateau after 10 min, and the adsorption capacity of Pb²⁺ (163.93 mg/g) was higher than that of Zn²⁺ (84.74 mg/g). Thermodynamic analysis showed that the adsorption of two metals by M-EMCS was spontaneous, endothermic, and irreversible. XPS analysis showed that M-EMCS mainly removes Pb²⁺ and Zn²⁺ through ion exchange, chelation, and redox. Graphical abstract.

Removal of Zn(II), Mn(II) and Cu(II) by adsorption onto banana stalk biochar: adsorption process and mechanisms

Low-cost banana stalk (Musa nana Lour.) biochar was prepared using oxygen-limited pyrolysis (at 500 °C and used), to remove heavy metal ions (including Zn(II), Mn(II) and Cu(II)) from aqueous solution. Adsorption experiments showed that the initial solution pH affected the ability of the biochar to adsorb heavy metal ions in single- and polymetal systems. Compared to Mn(II) and Zn(II), the biochar exhibited highly selective Cu(II) adsorption. The adsorption kinetics of all three metal ions followed the pseudo-second-order kinetic equation. The isotherm data demonstrated the Langmuir model fit for Zn(II), Mn(II) and Cu(II). The results showed that the chemical adsorption of single molecules was the main heavy metal removal mechanism. The maximum adsorption capacities (mg·g^-1) were ranked as Cu(II) (134.88) > Mn(II) (109.10) > Zn(II) (108.10)) by the single-metal adsorption isotherms at 298 K. Moreover, characterization analysis was performed using Fourier transform infrared spectroscopy, the Brunauer-Emmett-Teller method, scanning electron microscopy with energy-dispersive X-ray spectroscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. The results revealed that ion exchange was likely crucial in Mn(II) and Zn(II) removal, while C-O, O-H and C = O possibly were key to Cu(II) removal by complexing or other reactions.

CuO coated olive cake nanocomposites for rapid phenol removal and effective discoloration of high strength olive mill wastewater

The potential of solid olive wastes-based adsorbent (CuO-OC) with photocatalytic power was established for the removal of total phenolics and photocatalytic discolourization of high strength olive mill wastewater (OMW). Clear insight of the FTIR and Brunauer-Emmett-Teller analyses showed that oxygen-containing functional groups of CuO-OC likely participated in the adsorption of total phenols from the OMW via a π-π interaction, hydrogen bonding and electrostatic interaction. Also, the total pore volume of CuO-OC decreased from 0.068 to 0.052 cm³ g^-1 after adsorption, which suggested that phenolics were trapped within the micro- and mesopores of CuO-OC. The adsorption kinetics revealed that ∼82.7-95% of the phenolic compounds were removed within the first 360 min which is relatively faster than adsorbents and methods reported elsewhere. The isotherm results showed that Redlich-Peterson equation fit the experimental data very well with least error (χ² = 1.46-3.19) and high correlation coefficients (0.992-0.996), which suggested a mixture of hetero- and monolayer coverage of the phenolics on the CuO-OC surface. Results obtained herein are of practical interest and the reuse efficiency of CuO-OC remained ∼60% after 5 successive recycling.

Single-component and competitive adsorption of tetracycline and Zn(ii) on an NH4Cl-induced magnetic ultra-fine buckwheat peel powder biochar from water: studies on the kinetics, isotherms, and mechanism

Single-component and competitive adsorption of tetracycline (TC) and Zn(ii) on an NH₄Cl-induced magnetic ultra-fine buckwheat peel powder biochar (NH₄Cl-BHP-char/Fe₃O₄) was investigated in batch experiments.

High-efficiency adsorption and regeneration of methylene blue and aniline onto activated carbon from waste edible fungus residue and its possible mechanism

Edible fungus residue as an efficient and low-cost precursor was used to produce Edible Fungus residue Activated Carbon (EFAC) using the zinc chloride activation method at a 1 : 2 impregnation ratio and 600 °C activation for 3 hours. The activation process does not need gases like nitrogen and is suitable for mass production. Fungal biodegradation facilitates efficient chemical activation, which might have generated abundant pores on the activated carbon sample. Using BET, X-ray diffraction (XRD), scanning electron microscopy (SEM), and FTIR characterization, reveals that EFAC exhibits a large specific surface area (1070 m² g⁻¹), and large pore volume (0.68 cm³ g⁻¹), with its surface displaying a honeycomb-like structure. The EFAC adsorbs methylene blue (MB) and aniline in water, with maximum adsorptions of 662.25 and 27.10 mg g⁻¹, respectively. Various adsorption conditions, such as the EFAC dosage, pH, contact time and initial concentration were investigated. The adsorption is characterized by the pseudo-second-order kinetic and Langmuir isotherm models, with thermodynamics studies indicating that the adsorption is endothermic and spontaneous. Furthermore, the EFAC exhibited good regeneration performance by a 90% ethanol solution. The EFAC is a low-cost and environmentally friendly adsorbent for removing organic contaminants in wastewater.

Edible fungus residue as an efficient and low-cost precursor was used to produce Edible Fungus residue Activated Carbon (EFAC) using the zinc chloride activation method at a 1 : 2 impregnation ratio and 600 °C activation for 3 hours.