Influence of semi-arid environment on radiation use efficiency and other growth attributes of lentil crop

Soil carbon-nutrient cycling, energetics, and carbon footprint in calcareous soils with adoption of long-term conservation tillage practices and cropping systems diversification

Calcareous soils, comprising vast areas in northern and eastern parts of India, are characterized by low soil organic carbon (SOC) with high free CaCO3 that results in low nutrient bioavailability with poor soil structure. Improvement of this soil can be achieved with conservation tillage with residue retention coupled with diversification of cropping system including legumes, and oilseeds in the system. Concerning all these, a long-term experiment was carried out in the calcareous soils having low organic carbon and high free CaCO3 (∼33 %) with varied tillage practices, viz. permanent bed with residue (PB), zero tillage with residue (ZT), and conventional tillage without residue (CT); and cropping systems viz. maize-wheat-greengram (MWGg), rice-maize (RM), and maize-mustard-greengram (MMuGg) during 2015-2021. From this study, it was observed that PB and ZT resulted in ∼25-30 % increment in SOC compared to the initial SOC, while CT showed a 4 % decrease in the SOC. Conservation tillage practices also resulted in better soil aggregation and favourable bulk density of the soil. Furthermore, PB and ZT practice exhibited 10-13 %; 15-18 %; 11-15 %; 40-60 %, 20-36 %, and 23-45 % increments in the soil available N, P, K, soil microbial biomass carbon, dehydrogenase activity, and urease activity, respectively over those under CT. Crop diversification with the inclusion of legume and oilseed crops (MMuGg, and MWGg) over cereal-dominated RM systems resulted in better soil health. Maize equivalent yield and energy use efficiency (%) were also found to be the maximum under PB, and ZT, in combination with the MMuGg system. ZT and PB also reduced the carbon footprint by 465 and 822 %, respectively over CT by elevating SOC sequestration. Hence, conservation tillage practices with residue retention coupled with diversification in maize-based cropping systems with mustard and greengram can improve soil health, system productivity, and energetics, and reduce the carbon footprint in calcareous soils.

An improved deep learning procedure for statistical downscaling of climate data

Recent climate change (CC) scenarios from the Coupled Model Intercomparison Project Phase 6 (CMIP6) have just been released in coarse resolution. Deep learning (DL) based on statistical downscaling has recently been used, but more research is needed, particularly in arid regions, because little is known about their suitability for extrapolating future CC scenarios. Here we analyzed this issue by downscaling maximum, and minimum temperature over the Egyptian domain based on one General Circulation Model (GCM) as CanESM5 and two shared socioeconomic pathways (SSPs) as SSP4.5 and SSP8.5 from CMIP6 using Convolutional Neural Network (CNN) herein after called CNNSD. The downscaled maximum and minimum temperatures based CNNSD was able to reproduce the observed climate over historical and future periods at a finer resolution (0.1°), reducing the biases exhibited by the original scenario. To the best of our knowledge, this is the first time CNN has been used to downscale CMIP6 scenarios, particularly in arid regions. The downscaled analysis showed that maximum and minimum temperatures are expected to rise by 4.8 °C and 4.0 °C, respectively, in the future (2015-2100), compared to the historical period, under the moderate scenario (SSP4.5). Meanwhile, under the Fossil-fueled Development scenario (SSP8.5), these values will rise by 6.3 °C and 4.2 °C, respectively as analyzed by the CNNSD. The developed approach could be used not only in Egypt but also in other developing countries, which are especially vulnerable to climate change and has a scarcity of related research. The established downscaled approach's supply can be used to provide climate services, as a driver for impact studies and adaptation decisions, and as information for policy development. More research is needed, however, to include multi-GCMs to quantify the uncertainties between GCMs and SSPs, improving the outputs for use in climate change impacts and adaptations for food and nutrition security.

The critical role of biochar to mitigate the adverse impacts of drought and salinity stress in plants

Drought stress (DS) is a potential abiotic stress that is substantially reducing crop productivity across the globe. Likewise, salinity stress (SS) is another serious abiotic stress that is also a major threat to global crop productivity. The rapid climate change increased the intensity of both stresses which pose a serious threat to global food security; therefore, it is urgently needed to tackle both stresses to ensure better crop production. Globally, different measures are being used to improve crop productivity under stress conditions. Among these measures, biochar (BC) has been widely used to improve soil health and promote crop yield under stress conditions. The application of BC improves soil organic matter, soil structure, soil aggregate stability, water and nutrient holding capacity, and the activity of both beneficial microbes and fungi, which leads to an appreciable increase in tolerance to both damaging and abiotic stresses. BC biochar protects membrane stability, improves water uptake, maintains nutrient homeostasis, and reduces reactive oxygen species production (ROS) through enhanced antioxidant activities, thereby substantially improving tolerance to both stresses. Moreover, BC-mediated improvements in soil properties also substantially improve photosynthetic activity, chlorophyll synthesis, gene expression, the activity of stress-responsive proteins, and maintain the osmolytes and hormonal balance, which in turn improve tolerance against osmotic and ionic stresses. In conclusion, BC could be a promising amendment to bring tolerance against both drought and salinity stresses. Therefore, in the present review, we have discussed various mechanisms through which BC improves drought and salt tolerance. This review will help readers to learn more about the role of biochar in causing drought and salinity stress in plants, and it will also provide new suggestions on how this current knowledge about biochar can be used to develop drought and salinity tolerance.

Effect of Sowing Date and Environment on Phenology, Growth and Yield of Lentil (Lens culinaris Medikus.) Genotypes

Lentil, an important pulse crop in Australia, is sown soon after the onset of autumn rains and grows mainly under rainfed conditions. This study examined lentil phenological development, growth and grain yield under different sowing dates and environments in New South Wales (NSW). Eight lentil varieties were phenotyped over two years and four sowing times in southern NSW (Leeton, Wagga Wagga and Yanco (one year)) and central western NSW (Trangie). Time of sowing affected important agronomic traits, with a delay in sowing decreasing time to flowering and podding, biomass accumulation, plant height and position of bottom pod. Sowing earlier or later than optimum decreased grain yield. Yield was mainly determined by the number of pods and seeds per plant, with minimal impact from seed weight. Overall, yields were higher in favorable environments such Leeton experiment which received more water compared to the other sites which received less water. Averaged across sowing dates, the slower maturing PBA Greenfield was lower yielding whilst fast maturing varieties such as PBA Bolt and PBA Blitz yielded higher. PBA Jumbo2 is less sensitive to environmental interaction and thus broadly adapted to the diverse environments. Optimum sowing time was identified as the end of April to mid-May.

Effect of slow-release nitrogenous fertilizers on dry matter accumulation, grain nutritional quality, water productivity and wheat yield under an arid environment

Slow release nitrogenous fertilizers can improve crops production and reduce the environmental challenges in agro-ecosystem. There is a need to test the efficiency and performance under arid climatic conditions. The study investigates the effect of slow-release fertilizers (urea, neem coated urea (NCU), sulfur coated urea (SCU) and bioactive sulfur coated urea (BSCU)) on the growth, productivity and grain nutritional qualities of wheat crop. Slow-release fertilizers (SRF) with nitrogen levels (130,117,104 and 94 kg ha⁻¹) were applied with equal splits at sowing, 20 and 60 days after sowing (DAS). Research showed that the BSCU with 130 kg ha⁻¹ increased dry matter accumulation (1989 kg ha⁻¹) after anthesis and grain yield 4463 kg ha⁻¹. The higher plant height (102 cm) was attained by 130 kg N ha⁻¹ SCU while the minimum (77.67 cm) recorded for 94 kg N ha⁻¹ as urea source. Maximum grain NPK concentrations (3.54, 0.66 and 1.07%) were recorded by BSCU 130 kg N ha⁻¹ application. While, the minimum NPK (0.77, 0.19 and 0.35%) were observed by Urea 94 kg N ha⁻¹. The high irrigation water use efficiency (WUE) recorded (20.92 kg ha⁻¹ mm⁻¹) and a crop index of 25.52% by BSCU 130 kg N ha⁻¹ application. Research findings show that generally all SRF but particularly BSCU proved effective and can be recommended for wheat crop under arid environment.

Effect of slow release nitrogenous fertilizers and biochar on growth, physiology, yield, and nitrogen use efficiency of sunflower under arid climate

Sunflower plants need nitrogen consistently and in higher amount for optimum growth and development. However, nitrogen use efficiency (NUE) of sunflower crop is low due to various nitrogen (N) losses. Therefore, it is necessary to evaluate the advanced strategies to minimize N losses and also improve sunflower productivity under arid climatic conditions. A field trial was conducted with four slow release nitrogenous fertilizers [SRNF (bacterial, neem, and sulfur-coated urea and N loaded biochar)] and three N levels (100% = 148 kg N ha^-1, 80% = 118 kg N ha^-1, and 60% = 89 kg N ha^-1) of recommended application (100%) for sunflower crop under arid climatic conditions. Results showed that neem-coated urea at 148 kg N ha^-1 significantly enhanced crop growth rate (CGR) (19.16 g m^-2 d^-1) at 60-75 days after sowing (DAS); leaf area index (2.12, 3.62, 5.97, and 3.00) at 45, 60, 75, and 90 DAS; and total dry matter (14.27, 26.29, 122.67, 410, and 604.33 g m^-2) at 30, 45, 60, 75, and 90 DAS. Furthermore, higher values of net leaf photosynthetic rate (25.2 µmol m^-2 s^-1), transpiration rate (3.66 mmol s^-1), and leaf stomatal conductance (0.39 mol m^-2 s^-1) were recorded for the same treatment. Similarly, neem-coated urea produced maximum achene yield (2322 kg ha^-1), biological yield (9000 kg ha^-1), and harvest index (25.8%) of the sunflower crop. Among various N fertilizers, neem-coated urea showed maximum NUE (20.20 kg achene yield kg^-1 N applied) in comparison to other slow release N fertilizers. Similarly, nitrogen increment N₆₀ showed maximum NUE (22.40 kg grain yield kg^-1 N applied) in comparison to N₈₀ and N₁₀₀. In conclusion, neem-coated urea with 100% and 80% of recommended N would be recommended for farmers to get better sunflower productivity with sustainable production and to reduce the environmental nitrogen losses.

Leaf rolling dynamics for atmospheric moisture harvesting in wheat plant as an adaptation to arid environments

Plant species surviving in the arid regions have developed novel leaf features to harvest atmospheric water. Before the collected water evaporates, it is absorbed and transported for storage within the tissues and move toward the root zone through the unique chemistry of leaf structures. Deep insights into such features reveal that similarities can be found in the wheat plant. Therefore, this study aimed to evaluate the leaf rolling dynamics among wheat genotypes and their relationships with moisture harvesting and its movement on the leaf surface. For this purpose, genotypes were characterized for leaf rolling at three distinct growth stages (tillering, booting, and spike emergence). The contact angle of leaf surface dynamics (adaxial and abaxial), water budget, and morphophysiological traits of genotypes were measured. The results indicate that leaf rolling varies from inward to twisting type among genotypes and positively affected the water use efficiency and soil moisture difference at all growth stages under normal and drought conditions. Results of wetting property (hydrophilic < 90°) of the leaf surface were positively associated with the atmospheric water collection (4-7 ml). The lower values of contact angle hysteresis (12-19°) also support this mechanism. Thus, genotypes with leaf rolling dynamics (inward rolled and twisted) and surface wettability is an efficient fog harvesting system in wheat for interception and utilization of fog water in drought-prone areas. These results can be exploited to develop self-irrigated and drought-tolerant crops.

Leaf rolling and leaf angle improve fog capturing and transport in wheat; adaptation for drought stress in an arid climate

BACKGROUND

Plants use different mechanisms to transport the collected fog water. Leaf traits of wheat play an important role in directing fog water through leaf rolling and leaf angle into the root zone, where it can be stored for consumption. Wheat leaf traits can enhance fog capturing under drought stress. To examine this, 200 wheat genotypes were characterized for leaf rolling and leaf angle under optimal conditions in the field using a randomized complete block design. Seven different phenotypic combinations for leaf traits were observed. A core set of 44 genotypes was evaluated under drought stress.

RESULTS

Results show that variability for leaf traits existed among genotypes. An association was found between leaf rolling and leaf angle, moisture capturing, physiological parameters, and yield contributing traits using correlation. Physiological parameters, especially water use efficiency, were positively correlated with grain yield and moisture capturing at both growth stages. The genotypes (G11 at tillering and G24 at booting phonological phases) with inward to twisting type rolling and erect to semi-erect leaf angle capture more water (12-20%) within the root zone. Twenty-one genotypes were selected based on moisture capturing efficiency and evaluated for leaf surface wettability. Association was found between fog capturing and wettability. This shows that it was due to the leaf repellency validated from static contact angle measurements.

CONCLUSION

These results will give insights into fog capturing and the development of drought-tolerant crops in the semi-arid and arid regions.

Wetting mechanism and morphological adaptation; leaf rolling enhancing atmospheric water acquisition in wheat crop-a review

Several plant species such as grasses are dominant in many habitats including arid and semi-arid areas. These species survive in these regions by developing exclusive structures, which helps in the collection of atmospheric water. Before the collected water evaporates, these structures have unique canopy structure for water transportation that plays an equivalent share in the fog-harvesting mechanism. In this review, the atmospheric gaseous water harvesting mechanisms and their affinity of measurements were discussed. Morphological adaptations and their role in the capturing of atmospheric gaseous water of various species were also discussed. The key factor for the water collection and its conduction in the wheat plant is the information of contact angle hysteresis. In wheat, leaf rolling and its association with wetting property help the plant in water retention. Morphological adaptations, i.e., leaf erectness, grooves, and prickle hairs, also help in the collection and acquisition of water droplets by stem flows in directional guide toward the base of the plant and allow its rapid uptake. Morphological adaptation strengthens the harvesting mechanism by preventing the loss of water through shattering. Thus, wheat canopy architecture can be modified to harvest the atmospheric water and directional movement of water towards the root zone for self-irrigation. Moreover, these morphological adaptations are also linked with drought avoidance and corresponding physiological processes to resist water stress. The combination of these traits together with water use efficiency in wheat contributes to a highly efficient atmospheric water harvesting system that enables the wheat plants to reduce the cost of production. It also increases the yielding potential of the crop in arid and semi-arid environments. Further investigating the ecophysiology and molecular pathways of these morphological adaptations in wheat may have significant applications in varying climatic scenarios.

Growth and productivity assessments of peanut under different irrigation water management practices using CSM-CROPGRO-Peanut model in Eastern Mediterranean of Turkey

Irrigation water scheduling is crucial to make the most efficient use of ever-decreasing water. As excessive irrigation decreases yield, while imprecise application also causes various environmental issues. Therefore, efficient management of irrigation frequency and irrigation level is necessary to sustain productivity under limited water conditions. The objective of the current study is to assess the water productivity at various irrigation regimes during peanut crop growing seasons (2014 and 2015) in Eastern Mediterranean, Turkey. The field experiments were conducted with treatments consisting of three irrigation frequencies (IF) (IF₁: 25 mm; IF₂: 50 mm; and IF₃: 75 mm of cumulative pan evaporation (CPE)), and four irrigation water levels (WL₁ = 0.50, WL₂ = 0.75, WL₃ = 1.0, and WL₄ = 1.25). WL₁, WL₂, WL₃, and WL₄ treatments received 50, 75, 100, and 125 of cumulative pan evaporation. The CSM-CROPGRO-Peanut model was calibrated with experimental data in 2014 and evaluated with second-year experimental data (2015). The model simulated seed yield and final biomass (dry matter) reasonably well with low normalized root mean square error (RMSE_n) in various irrigation intervals. The model simulated reasonably well for days to anthesis (RMSE = 2.53, d-stat = 0.96, and r² = 0.90), days to physiological maturity (RMSE = 2.55), seed yield (RMSE = 1504), and tops biomass dry weight at maturity (RMSE = 3716). Simulation results indicated good agreement between measured and simulated soil water content (SWC) with low RMSE_n values (4.0 to 16.8% in 2014 and 4.3 to 18.2% in 2015). Further results showed that IF₂I₁₂₅ irrigation regime produced the highest seed yield. Generally, model evaluation performed reasonably well for all studied parameters with both years' experimental data. Results also showed that the crop model would be a precision agriculture tool for the extrapolation of the allocation of irrigation water resources and decision management under current and future climate.

Searching for Abiotic Tolerant and Biotic Stress Resistant Wild Lentils for Introgression Breeding Through Predictive Characterization

Crop wild relatives are species related to cultivated plants, whose populations have evolved in natural conditions and confer them valuable adaptive genetic diversity, that can be used in introgression breeding programs. Targeting four wild lentil taxa in Europe, we applied the predictive characterization approach through the filtering method to identify populations potentially tolerant to drought, salinity, and waterlogging. In parallel, the calibration method was applied to select wild populations potentially resistant to lentil rust and broomrape, using, respectively, 351 and 204 accessions evaluated for these diseases. An ecogeographic land characterization map was used to incorporate potential genetic diversity of adaptive value. We identified 13, 1, 21, and 30 populations potentially tolerant to drought, soil salinity, waterlogging, or resistance to rust, respectively. The models targeting broomrape resistance did not adjust well and thus, we were not able to select any population regarding this trait. The systematic use of predictive characterization techniques may boost the efficiency of introgression breeding programs by increasing the chances of collecting the most appropriate populations for the desired traits. However, these populations must still be experimentally tested to confirm the predictions.

Effect of Short-Term Zero Tillage and Legume Intercrops on Soil Quality, Agronomic and Physiological Aspects of Cotton under Arid Climate

A detailed field experiment was carried out to study the effect of conventional and zero tillage and legume intercrops on soil health indicators and cotton productivity and also yield components of leguminous crops at the Research Farm, MNS-University of Agriculture, Multan, Pakistan. The field experiment was comprised of four legume intercrops (no intercrops (sole cotton), mung bean, mash bean, and soybean) and two tillage systems (three years zero tillage (ZT) and long-term conventional tillage (CT)). The CT showed the highest plant height (121 cm), total bolls per plant (22.9 bolls), boll weight (2.74 g) and seed yield (2031 kg ha−1) of the cotton crop, as compared to ZT. The highest leaf transpiration rate (9.28 mmol H2O m−2 s−1), net leaf photosynthetic rate (27.17 µmol m−2 s−1), stomatal conductance (0.493 mmol m−2 s−1), chlorophyll content (62.3 SPAD value), plant height (123 cm), total bolls per plant (24.4), boll weight (2.83 g), and seed yield (2090 kg ha−1) of cotton crop were recorded when it was grown as a sole crop, as compared to legume intercrops. However, soil organic matter (0.77%), phosphorus (8.08 mg kg−1), potassium (253 mg kg−1), and microbial population (7.26 × 106 Cfu) were higher in ZT than in CT. Mung bean showed a maximum number of pods (32), seed yield (173 kg ha−1), biomass (950 kg ha−1), and harvest index (19.0%), when intercropped with cotton. The highest land equivalent ratio and area time equivalent ratio were recorded in mung bean and cotton intercropping, grown under a CT system. Furthermore, the maximum benefit-cost ratio was recorded in mung bean and cotton intercropping, over sole cotton cropping under CT (1.75) and ZT (1.67) systems. The ZT and intercropping of leguminous crops with cotton might be a promising option for increasing the seed cotton yield, seed yield of leguminous crops, system profitability, and sustainability of soil health.

Biochar and slow-releasing nitrogen fertilizers improved growth, nitrogen use, yield, and fiber quality of cotton under arid climatic conditions

The efficiency of nitrogenous fertilizers in South Asia is on a declining trajectory due to increased losses. Biochar (BC) and slow-releasing nitrogen fertilizers (SRNF) have been found to improve nitrogen use efficiency (NUE) in certain cases. However, field-scale studies to explore the potential of BC and SRNF in south Asian arid climate are lacking. Here we conducted a field experiment in the arid environment to demonstrate the response of BC and SRNF on cotton growth and yield quality. The treatments were comprised of two factors, (A) nitrogen sources, (i) simple urea, (ii)neem-coated urea, (iii)sulfur-coated urea, (iv) bacterial coated urea, and cotton stalks biochar impregnated with simple urea, and (B) nitrogen application rates, N₁=160 kg ha^-1, N₂ = 120 kg ha^-1, and N₃ = 80 kg ha^-1. Different SRNF differentially affected cotton growth, morphological and physiological attributes, and seed cotton yield (SCY). The bacterial coated urea at the highest rate of N application (160 kg ha^-1) resulted in a higher net leaf photosynthetic rate (32.8 μmol m^-2 s^-1), leaf transpiration rate (8.10 mmol s^-1), and stomatal conductance (0.502 mol m^-2 s^-1), while leaf area index (LAI), crop growth rate (CGR), and seed cotton yield (4513 kg ha^-1) were increased by bacterial coated urea at 120 kg ha^-1 than simple urea. However, low rate N application (80 kg ha^-1) of bacterial coated urea showed higher nitrogen use efficiency (39.6 kg SCY kg^-1 N). The fiber quality (fiber length, fiber strength, ginning outturn, fiber index, and seed index) was also increased with the high N application rates than N2 and N3 application. To summarize, the bacterial coated urea with recommended N (160 kg ha^-1) and 75% of recommended N application (120 kg ha^-1) may be recommended for farmers in the arid climatic conditions of Punjab to enhance the seed cotton yield, thereby reducing nitrogen losses.

Potential Effects of Biochar Application for Improving Wheat (Triticum aestivum L.) Growth and Soil Biochemical Properties under Drought Stress Conditions

Different soil amendments are applied to improve soil properties and to achieve higher crop yield under drought conditions. The objective of the study was to investigate the role of biochar for the improvement of wheat (Triticum aestivum L.) growth and soil biochemical properties under drought conditions. A pot experiment with a completely randomized design was arranged with four replications in a wire house. Drought was imposed on two critical growth stages (tillering and grain filling) and biochar was applied to the soil 10 days before sowing at two different rates (28 g kg−1 and 38 g kg−1). Soil samples were collected to determine the soil properties including soil respiration and enzymatic parameters after crop harvesting. Results showed that water stress negatively affects all biochemical properties of the soil, while biochar amendments positively improved these properties. Application of biochar at 38 g kg−1 provided significantly higher mineral nutrients, Bray P (18.72%), exchangeable-K (7.44%), soil carbon (11.86%), nitrogen mineralization (16.35%), and soil respiration (6.37%) as a result of increased microbial activities in comparison with the 28 g kg−1 rate.

Slow-release nitrogen fertilizers enhance growth, yield, NUE in wheat crop and reduce nitrogen losses under an arid environment

Higher demands of food led to higher nitrogen application to promote cropping intensification and produce more which may have negative effects on the environment and lead to pollution. While sustainable wheat production is under threat due to low soil fertility and organic matter due to nutrient degradation at high temperatures in the region. The current research explores the effects of different types of coated urea fertilizers and their rates on wheat crop under arid climatic conditions of Pakistan. Enhancing nitrogen use efficiency by using eco-friendly coated urea products could benefit growers and reduce environmental negative effects. A trial treatment included N rates (130, 117, 104, and 94 kg ha^-1) and coated urea sources (neem coated, sulfur coated, bioactive sulfur coated) applied with equal quantity following split application method at sowing, 20 and 60 days after sowing (DAS). The research was arranged in a split-plot design with randomized complete block design had three replicates. Data revealed that bioactive sulfur coated urea with the application of 130 kg N ha^-1 increased chlorophyll contents 55.0 (unit value), net leaf photosynthetic rate (12.51 μmol CO₂ m^-2 s^-1), and leaf area index (5.67) significantly. Furthermore, research elucidates that bioactive sulfur urea with the same N increased partial factor productivity (43.85 Kg grain Kg^-1 N supplied), nitrogen harvest index (NHI) 64.70%, and partial nutrient balance (1.41 Kg grain N content Kg^-1 N supplied). The neem-coated and sulfur-coated fertilizers also showed better results than monotypic urea. The wheat growth and phenology significantly improved by using coated fertilizers. The crop reached maturity earlier with the application of bioactive sulfur-coated urea than others. Maximum total dry matter 14402 (kg ha^-1) recorded with 130 kg N ha^-1application. Higher 1000-grain weight (33.66 g), more number of grains per spike (53.67), grain yield (4457 kg ha^-1), and harvest index (34.29%) were obtained with optimum N application 130 kg ha^-1 (recommended). There is a significant correlation observed for growth, yield, and physiological parameters with N in the soil while nitrogen-related indices are also positively correlated. The major problem of groundwater contamination with nitrate leaching is also reduced by using coated fertilizers. Minimum nitrate concentration (7.37 and 8.77 kg ha^-1) was observed with the application of bioactive sulfur-coated and sulfur-coated urea with lower N (94 kg ha^-1), respectively. The bioactive sulfur-coated urea with the application of 130 kg N ha^-1 showed maximum phosphorus 5.45 mg kg^-1 and potassium 100.67 mg kg^-1 in the soil. Maximum nitrogen uptake (88.20 kg ha^-1) is showed by bioactive sulfur coated urea with 130 kg N ha^-1 application. The total available NPK concentrations in soil showed a significant correlation with physiological attributes; grain yield; harvest index; and nitrogen use efficiency components, i.e., partial factor productivity, partial nutrient balance, and nitrogen harvest index. This research reveals that coating urea with secondary nutrients, neem oil, and microbes are highly effective techniques for enhancing fertilizer use efficiency and wheat production in calcareous soils and reduced N losses under arid environments.

Chemical and Biological Enhancement Effects of Biochar on Wheat Growth and Yield under Arid Field Conditions

Nitrogen (N) losses are prevalent under South East Asia’s due to high N fertilizer inputs, but low N fertilizer use efficiency. This leaves a large quantity of reactive N at risk of loss to the environment. Biochar has been found to reduce N losses across a variety of soil types, however, there is limited data available for semi-arid climates, particularly at a field-scale. Herein we present an exploration of the biological and chemical enhancement effects observed of a cotton stalk-based biochar on wheat growth and yield under arid field conditions. The biochar was treated with urea-N and biofertilizer (bio-power) in different treatment setups. The six experimental treatments included; (i) a full N dose “recommended for wheat crops in the region” (104 kg N ha−1) as a positive control; (ii) a half N dose (52 kg N ha−1); (iii) a half N dose + biofertilizer (4.94 kg ha−1) as a soil mixture; (iv) a half N dose + biofertilizer as a seed inoculation; (v) a full N dose as broadcast + biochar (5 t ha−1) inoculated with biofertilizer; and (vi) a full N dose loaded on biochar + biofertilizer applied as a soil mixture. The half dose N application or biofertilizer addition as soil mix/seed inoculated/biochar inoculation with biofertilizer caused reduced wheat growth and yield compared to the control (conventional N fertilization). However, co-application of chemically enhanced biochar (loaded with a full N dose) and biofertilizer as soil mixture significantly increased the crop growth rate (CGR) and leaf area index (LAI). A significantly higher crop growth and canopy development led to a higher light interception and radiation use efficiency (RUE) for total dry matter (TDM) and grain yield (11% greater than control) production compared to the control. A greater grain yield, observed for the full N dose loaded on biochar + biofertilizer applied as a soil mixture, is attributed to prolonged N availability as indicated by greater plant and soil N content at harvest and different crop growth stages, respectively. The present study has improved our understanding of how the application of nitrogen loaded biochar and biofertilizer as soil mixtures can synergize to positively affect wheat growth and soil-nitrogen retention under arid environmental conditions.