Leonardo da Vinci's "Last Supper": a case study to evaluate the influence of visitors on the Museum preservation systems

A multi-analytical approach for the identification of pollutant sources on black crust samples: Stable isotope ratio of carbon, sulphur, and oxygen

This study is focused on the identification of pollutant sources on black crust (BC) samples from the Monumental Cemetery of Milan (Italy), through a multi-analytical approach based on the determination of stable isotope ratios of carbon, sulphur, and oxygen. Six black crust samples, mainly developed on marble sculptures over a time span of 100-150 years, were analysed. For the first time, δ13C was measured for BC samples: δ13C values of the pulverized samples (from -1.2 to +1.3 ‰) are very close to the values obtained from the carbonate matrix, whereas after the removal of the matrix through acidification, δ13C values of BC samples from Milan range from -27.2 to -22.1 ‰, with no significant variation between samples with different ratios of organic carbon to elemental carbon. In sum, the δ13C values obtained for all BC samples fall within the range of anthropogenic emissions such as vehicle traffic, coal combustion and industrial emissions. δ34S and δ18O values of sulphate from BC samples range from -6.3 to +7.0 ‰ and from +7.6 to +10.5 ‰, respectively. Coupling the analysis of the oxygen isotope ratio with that of sulphur enables a more precise identification of the origin of sulphates: the observed isotopic composition falls in the range typical for anthropogenic emission of sulphur dioxide. Overall, in this study, C, S and O isotopes were combined for the first time to assess pollutant sources on black crust samples: this multi-stable isotope approach allowed to show that the BC formation on monuments from the Monumental Cemetery of Milan mostly results from anthropogenic emissions from fossil fuels combustion by road vehicles and factories, as well as domestic heating.

Insight on the deterioration of cultural objects: a multi-analytical approach to characterize degradation products of lead weights from a Steinway & sons piano

The identification of the degradation products in objects of cultural significance, including musical instruments (e.g., a piano), is a key issue for the preservation and valorisation processes of cultural heritage. The aim of this study is to characterize the degradation products of lead weights from an important Steinway & sons piano using a multi-analytical approach that includes ionic chromatography (IC), X-ray diffraction (XRD) and Fourier transform-infrared (FTIR) spectroscopy analyses. These techniques allowed us to identify hydrocerussite as the main degradation product on the superficial layer of lead weights, followed by lead acetate and formate. Moreover, accelerated corrosion experiments in closed environments were performed under acetic and formic acid atmospheres to evaluate the development of lead acetate and formate over time. Exposure of lead weights to formic and acetic acid vapours leads to the prevalent formation of basic lead formate, which promotes the formation of hydrocerussite. These results can help to limit the degradation of these piano components and consequently preserve the sound of the piano itself.

Sulphurous air pollutants and exposure events of workers in thermal-mineral springs: a case study of Contursi Terme (Salerno, Italy)

Thermo-mineral springs are widely spread over the volcanic areas of Salerno, a city in southern Italy. Although the water of thermal structures provides beneficial effects on human health, the air is characterized by the presence of potentially toxic compounds, such as hydrogen sulphide (H₂S) and sulphur dioxide (SO₂). Exposure to sulphurous compounds may have detrimental effects on human health, with asthma being the most common. In this study, air concentrations of H₂S and SO₂ in the thermal springs of Contursi Terme (Salerno, Italy) were monitored for 4 months (using both active and passive sampling), along with the chemical and microclimatic characterization of thermal water, to assess workers' exposure to these pollutants. An in-depth characterization of indoor air at the springs is paramount to establish emission control limits for occupational exposure and to take protective measures. The air concentration of SO₂ varied from 0.11 ± 0.02 to 0.91 ± 0.02 mg/m³, following a seasonal pattern (higher values in winter and lower in spring). Conversely, indoor H₂S concentrations did not vary significantly with time, but outdoor levels (from 0.40 ± 0.03 to 1.90 ± 0.03 mg/m³) were always higher than indoor ones (from 0.11 ± 0.03 to 0.56 ± 0.03 mg/m³). Not negligible air concentrations of these pollutants were detected in this thermal spring workplace, so further investigations are needed to ensure workers' safety.

Deployment of a Novel Organic Acid Compound Disinfectant against Common Foodborne Pathogens

BACKGROUND

The disinfection process represents an important activity closely linked to the removal of micro-organisms in common processing systems. Traditional disinfectants are often not sufficient to avoid the spread of food pathogens; therefore, innovative strategies for decontamination are crucial to countering microbial transmission. This study aims to assess the antimicrobial efficiency of tetrapotassium iminodisuccinic acid salt (IDSK) against the most common pathogens present on surfaces, especially in food-borne environments.

METHODS

IDSK was synthesized from maleic anhydride and characterized through nuclear magnetic resonance (NMR) spectroscopy (both ¹H-NMR and ¹³C-NMR), thermogravimetric analysis (TGA) and Fourier Transform Infrared (FTIR) spectroscopy. The antibacterial activity was performed via the broth microdilution method and time-killing assays against Escherichia coli, Staphylococcus aureus, Salmonella enterica, Enterococcus faecalis and Pseudomonas aeruginosa (IDSK concentration range: 0.5-0.002 M). The biofilm biomass eradicating activity was assessed via a crystal violet (CV) assay.

RESULTS

The minimum inhibitory concentration (MIC) of IDSK was 0.25 M for all tested strains, exerting bacteriostatic action. IDSK also reduced biofilm biomass in a dose-dependent manner, reaching rates of about 50% eradication at a dose of 0.25 M. The advantages of using this innovative compound are not limited to disinfecting efficiency but also include its high biodegradability and its sustainable synthesis.

CONCLUSIONS

IDSK could represent an innovative and advantageous disinfectant for food processing and workers' activities, leading to a better quality of food and safer working conditions for the operators.

Polychlorinated Biphenyls (PCBs) in the Environment: Occupational and Exposure Events, Effects on Human Health and Fertility

In the last decade or so, polychlorinated biphenyls (PCBs) garnered renewed attention in the scientific community due to new evidence pointing at their continued presence in the environment and workplaces and the potential human risks related to their presence. PCBs move from the environment to humans through different routes; the dominant pathway is the ingestion of contaminated foods (fish, seafood and dairy products), followed by inhalation (both indoor and outdoor air), and, to a lesser extent, dust ingestion and dermal contact. Numerous studies reported the environmental and occupational exposure to these pollutants, deriving from building materials (flame-retardants, plasticizers, paints, caulking compounds, sealants, fluorescent light ballasts, etc.) and electrical equipment. The highest PCBs contaminations were detected in e-waste recycling sites, suggesting the need for the implementation of remediation strategies of such polluted areas to safeguard the health of workers and local populations. Furthermore, a significant correlation between PCB exposure and increased blood PCB concentrations was observed in people working in PCB-contaminated workplaces. Several epidemiological studies suggest that environmental and occupational exposure to high concentrations of PCBs is associated with different health outcomes, such as neuropsychological and neurobehavioral deficits, dementia, immune system dysfunctions, cardiovascular diseases and cancer. In addition, recent studies indicate that PCBs bioaccumulation can reduce fertility, with harmful effects on the reproductive system that can be passed to offspring. In the near future, further studies are needed to assess the real effects of PCBs exposure at low concentrations for prolonged exposure in workplaces and specific indoor environments.

Investigations on historical monuments' deterioration through chemical and isotopic analyses: an Italian case study

In this paper, we analysed the efflorescences present in the frescos of a monumental complex named S. Pietro a Corte situated in the historic centre of Salerno (Campania, Italy). The groundwater of the historic centre is fed by two important streams (the Rafastia and the Fusandola) that can be the sources of water penetration. The aims of this work are to (i) identify the stream that reaches the ancient frigidarium of S. Pietro a Corte and (ii) characterize the efflorescences on damaged frescos in terms of chemical nature and sources. In order to accomplish the first aim, the water of the Rafastia river (7 samples) and the water of the Fusandola river (7 samples) were analysed and compared with the water of a well of the Church (7 samples). The ionic chromatography measurements on the water samples allowed us to identify the Rafastia as the river that feeds the ancient frigidarium of S. Pietro a Corte. To investigate the nature and the origin of the efflorescences (our second aim), anionic chromatography analyses, X-ray diffraction measurements, and the isotopic determination of nitrogen were performed on the efflorescences (9 samples) and the salts recovered from the well (6 samples). Results of these analyses show that efflorescences are mainly made of potassium nitrate with a δ¹⁵N value of + 9.3 ± 0.2‰. Consequently, a plausible explanation for their formation could be the permeation of sewage water on the walls of the monumental complex.

Application of 13C Quantitative NMR Spectroscopy to Isotopic Analyses for Vanillin Authentication Source

The carbon stable isotope ratio (δ¹³C) is a valuable chemical parameter in the investigation of the geographic origin, quality, and authenticity of foods. The aim of this study is the evaluation of the feasibility of ¹³C-NMR (Nuclear Magnetic Resonance) spectroscopy to determine the carbon stable isotope ratio, at natural abundance, of small organic molecules, such as vanillin, without the use of IRMS (Isotope Ratio Mass Spectrometry). The determination of vanillin origin is an active task of research, and differentiating between its natural and artificial forms is important to guarantee the quality of food products. To reach our goal, nine vanillin samples were analyzed using both ¹³C quantitative NMR spectroscopy (under optimized experimental conditions) and IRMS, and the obtained δ¹³C values were compared using statistical analysis (linear regression, Bland–Altman plot, and ANOVA (analysis of variance)). The results of our study show that ¹³C-NMR spectroscopy can be used as a valuable alternative methodology to determine the bulk carbon isotope ratio and to identify the origin of vanillin. This makes it attractive for the analysis in the same experiment of site-specific and total isotope effects for testing authenticity, quality, and typicality of food samples. Moreover, the improvement of NMR spectroscopy makes it possible to avoid the influence of additives on carbon stable isotope ratio analysis and to clearly identify fraud and falsification in commercial samples.

Microplastics in the Environment: Intake through the Food Web, Human Exposure and Toxicological Effects

Recently, studies on microplastics (MPs) have increased rapidly due to the growing awareness of the potential health risks related to their occurrence. The first part of this review is devoted to MP occurrence, distribution, and quantification. MPs can be transferred from the environment to humans mainly through inhalation, secondly from ingestion, and, to a lesser extent, through dermal contact. As regards food web contamination, we discuss the microplastic presence not only in the most investigated sources, such as seafood, drinking water, and salts, but also in other foods such as honey, sugar, milk, fruit, and meat (chickens, cows, and pigs). All literature data suggest not-negligible human exposure to MPs through the above-mentioned routes. Consequently, several research efforts have been devoted to assessing potential human health risks. Initially, toxicological studies were conducted with aquatic organisms and then with experimental mammal animal models and human cell cultures. In the latter case, toxicological effects were observed at high concentrations of MPs (polystyrene is the most common MP benchmark) for a short time. Further studies must be performed to assess the real consequences of MP contamination at low concentrations and prolonged exposure.

Microplastics in the Aquatic Environment: Occurrence, Persistence, Analysis, and Human Exposure

Microplastics (MP) have recently been considered as emerging contaminants in the water environment. In the last number of years, the number of studies on MP has grown quickly due to the increasing consciousness of the potential risks for human health related to MP exposure. The present review article discusses scientific literature regarding MP occurrence and accumulation on the aquatic compartment (river, lake, wastewater, seafood), the analytical methods used to assess their concentration, their fate and transport to humans, and delineates the urgent areas for future research. To better analogize literature data regarding MP occurrence in the aquatic compartment we subdivided papers based on sampling, analytical methods, and concentration units with the aim to help the reader identify the similarities and differences of the considered research papers, thus making the comparison of literature data easier and the individuation of the most relevant articles for the reader’s interests faster. Furthermore, we argued about several ways for MP transport to humans, highlighting some gaps in analytical methods based on the reviewed publications. We suggest improving studies on developing standardized protocols to collect, process, and analyze samples.