Progress of marine biofouling and antifouling technologies

Preventing biofouling in microalgal photobioreactors

Photobioreactors (PBRs) are used to grow the light-requiring microalgae in diverse commercial processes. Often, they are operated as continuous culture over months period. However, with time, biofouling layer develops on the inner surfaces of their walls. The fouling layer formation deteriorates the PBR performance as foulants reduce light penetration in it. Light is essential for photosynthetic cultures, and a deterioration in lighting adversely impacts algae growth and biomass productivity. Fouling requires a frequent shutdown to clean the PBR and add to the environmental impact of the operation by generating many wastewaters contaminated with the cleaning chemicals. Antibiofouling coatings could be used to modify the surfaces of existing and future PBRs. Therefore, transparent and non-toxic fouling-release coatings, produced using hydrogel technology, could transform the existing PBRs into efficient and enduring microalgae culture systems, requiring only the application of the coating to the inner walls, without additional investments in new PBRs.

Preliminary hazard assessment of a new nature-inspired antifouling (NIAF) agent

A recently synthesized aminated 3,4-dioxygenated xanthone (Xantifoul2) was found to have promising antifouling (AF) effects against the settlement of the macrofouler Mytilus galloprovincialis larvae. Preliminary assessment indicated that Xantifoul2 has reduced ecotoxicological impacts: e.g., being non-toxic to the marine crustacea Artemia salina (<10 % mortality at 50 μM) and showing low bioconcentration factor in marine organisms. In order to meet the EU Biocidal Product Regulation, a preliminary hazard assessment of this new nature-inspired antifouling (NIAF) agent was conducted in this work. Xantifoul2 did not affect the swimming ability of the planktonic crustacean Daphnia magna, the growth of the diatom Phaeodactylum tricornutum, and the cellular respiration of luminescent Gram-negative bacteria Vibrio fischeri, supporting the low toxicity towards several non-target marine species. Regarding human cytotoxicity, Xantifoul2 did not affect the cell viability of retinal human cells (hTERT-RPE-1) and lipidomic studies revealed depletion of lipids involved in cell death, membrane modeling, lipid storage, and oxidative stress only at a high concentration (10 μM). Accelerated degradation studies in water were conducted under simulated sunlight to allow the understanding of putative transformation products (TPs) that could be generated in the aquatic ecosystems. Both Xantifoul2 and photolytic-treated Xantifoul2 in the aqueous matrix were therefore evaluated on several nuclear receptors (NRs). The results of this preliminary hazard assessment of Xantifoul2, combined with the high degradation rates in water, provide strong evidence of the safety of this AF agent under the evaluated conditions, and provide the support for future validation studies before this compound can be introduced in the market.

Proof of Concept of Natural and Synthetic Antifouling Agents in Coatings

Marine biofouling, caused by the deposition and accumulation of marine organisms on submerged surfaces, represents a huge concern for the maritime industries and also contributes to environmental pollution and health concerns. The most effective way to prevent this phenomenon is the use of biocide-based coatings which have proven to cause serious damage to marine ecosystems. Several research groups have focused on the search for new environmentally friendly antifoulants, including marine and terrestrial natural products and synthetic analogues. Some of these compounds have been incorporated into marine coatings and display interesting antifouling activities caused by the interference with the biofilm-forming species as well as by the inhibition of the settlement of macroorganisms. This review highlights the proof-of-concept studies of emerging natural or synthetic antifouling compounds in coatings, from lab-made to commercial ones, performed between 2019 and 2023 and their results in the field or in in vivo laboratorial tests.

Microbial Biofilms: Features of Formation and Potential for Use in Bioelectrochemical Devices

Microbial biofilms present one of the most widespread forms of life on Earth. The formation of microbial communities on various surfaces presents a major challenge in a variety of fields, including medicine, the food industry, shipping, etc. At the same time, this process can also be used for the benefit of humans-in bioremediation, wastewater treatment, and various biotechnological processes. The main direction of using electroactive microbial biofilms is their incorporation into the composition of biosensor and biofuel cells This review examines the fundamental knowledge acquired about the structure and formation of biofilms, the properties they have when used in bioelectrochemical devices, and the characteristics of the formation of these structures on different surfaces. Special attention is given to the potential of applying the latest advances in genetic engineering in order to improve the performance of microbial biofilm-based devices and to regulate the processes that take place within them. Finally, we highlight possible ways of dealing with the drawbacks of using biofilms in the creation of highly efficient biosensors and biofuel cells.

A comprehensive review on the inherent and enhanced antifouling mechanisms of hydrogels and their applications

Biofouling remains a persistent challenge within the domains of biomedicine, tissue engineering, marine industry, and membrane separation processes. Multifunctional hydrogels have garnered substantial attention due to their complex three-dimensional architecture, hydrophilicity, biocompatibility, and flexibility. These hydrogels have shown notable advances across various engineering disciplines. The antifouling efficacy of hydrogels typically covers a range of strategies to mitigate or inhibit the adhesion of particulate matter, biological entities, or extraneous pollutants onto their external or internal surfaces. This review provides a comprehensive review of the antifouling properties and applications of hydrogels. We first focus on elucidating the fundamental principles for the inherent resistance of hydrogels to fouling. This is followed by a comprehensive investigation of the methods employed to enhance the antifouling properties enabled by the hydrogels' composition, network structure, conductivity, photothermal properties, release of reactive oxygen species (ROS), and incorporation of silicon and fluorine compounds. Additionally, we explore the emerging prospects of antifouling hydrogels to alleviate the severe challenges posed by surface contamination, membrane separation and wound dressings. The inclusion of detailed mechanistic insights and the judicious selection of antifouling hydrogels are geared toward identifying extant gaps that must be bridged to meet practical requisites while concurrently addressing long-term antifouling applications.

In vitro and in vivo assessment of antimicrobial, enzymatic, and antifouling properties of self-potent lichen symbiotic bacteria

This study aimed to comprehensively assess the antimicrobial, antifouling, and antibiofilm-forming potential of lichen symbiotic bacteria against marine fouling bacterial strains. A total of 50 lichen-associated bacteria (LAB) isolates were successfully characterized and evaluated for their effectiveness in mitigating biofouling caused by various marine biofoulers. Through a battery of biological assays encompassing enzymatic, antagonistic, antimicrobial, and antifouling assays, 15 LAB isolates were identified based on their antagonist activities. Notably, the strain LAB4 exhibited remarkable performance across all bioassays, demonstrating its proficiency as an antifouling agent. The production of crude LAB extracts was successfully scaled up using a large-scale fermentor and further optimized. Additionally, a phylogenetic analysis of the isolated strain Bacillus proteolyticus D65's 16S ribosomal RNA gene revealed a high query coverage and percentage identity of 92.62% (accession no. MK883171.1). In conclusion, the lichen bacterial symbiotic isolate B. proteolyticus exhibited significant in vitro and in vivo inhibition of foulants. This study highlights the potential of lichens as a valuable source of yet unexplored bacteria. The bacterial consortium associated with Parmotrema sp. holds promise in combatting biofouling, which poses a substantial threat to the maritime industries and their economic stability.

Nanostructured Copper Selenide Coatings for Antifouling Applications

The accumulation of microorganisms, plants, algae, or small animals on wet surfaces that have a mechanical function causes biofouling, which can result in structural or other functional deficiencies. The maritime shipping industry must constantly manage biofouling to optimize operational performance, which is a common and long-lasting problem. It can occur on any metal structure in contact with or submerged in ocean water, which represents additional costs in terms of repairs and maintenance. This study is focused on the production of antifouling coatings, made with nanoparticles of copper selenide (CuSe NPs) modified with gum arabic, within a water-base acrylic polymeric matrix. During the curing of the acrylic resin, the CuSe NPs remain embedded in the resin, but this does not prevent the release of ions. The coatings released copper and selenium ions for up to 80 days, and selenium was the element that was released the most. The adhesion of film coatings to metallic substrates showed good adhesion, scale 5B (ASTM D3359 standard). Antimicrobial activity tests show that the coatings have an inhibitory effect on Escherichia coli and Candida albicans. The effect is more noticeable when the coating is detached from the substrate and placed on a growing medium, compared to the coating on a substrate. Scanning electron microscopy (SEM) observations show that nanostructured CuSe coatings are made up of rod-shaped and spherical particles with an average particle size of 101.6 nm and 50 nm, respectively. The energy dispersive X-ray spectroscopy (EDS) studies showed that the ratio of selenium nanoparticles is greater than that of copper and that their distribution is homogeneous.

Emerging marine environmental pollution and ecosystem disturbance in ship hull cleaning for biofouling removal

Numerous marine sessile organisms adhere to ship hulls and increase the sailing resistance. Antibiofouling paints are employed to maintain the ship performance. However, the chemicals employed for antifouling purposes are becoming increasingly diverse, lacking clear toxicological information. Particularly, the imperfect antibiofouling efficacies of these chemicals necessitate periodic hull cleaning to dislodge attached marine organisms. This hull cleaning process inadvertently releases a plethora of hazardous substances, including antibiofouling chemicals, heavy metals, and cleaning agents, alongside exotic microorganisms. This results in profound marine pollution and ecosystem disruption. Specifically, these exotic microorganisms pose a novel ecological threat in coastal waters. However, despite the gravity of ship hull cleaning-related issues, comprehensive investigations have been lacking, and international regulatory measures are gaining attention recently. Aiming to provide solutions to the emerging challenges associated with hull cleaning, this review endeavors to comprehensively address the biofouling organisms and their mechanisms, potential antifouling paint hazards, and effective hull cleaning methodologies.

First Barnacle (Amphibalanus amphitrite) Adhesion Strength Data on the Self-Polishing Coatings Off the Aegean Sea

The aim of this work is to study the adhesion strength of Amphibalanus amphitrite in the İzmir Bay and compare the results with the pseudobarnacle adhesion test. Normally, adhesion tests are performed to evaluate the performance of the antifouling coatings, but the test results can also be used to predict biofouling cleaning process efficacy. The biofouling process is highly dependent on environmental conditions. For this reason, laboratory tests are required to perform the performance tests on self-polishing coatings in cases where living organisms cannot be reached. For this purpose, different self-polishing antifouling coatings have been formulated. Field tests for the coatings were carried out in the Aegean Sea for 10 weeks. After 10 weeks, barnacle and pseudobarnacle adhesion tests were conducted on coatings. When the results were compared, similarity was observed between the adhesion strength of barnacles and pseudobarnacles with 10 mm diameter on coating with the rosin/xylene/BaSO4 (40:40:20 w/w %). The adhesion strength of barnacles and pseudobarnacles on the coating 12 was found to be 0.46 and 0.45 MPa, respectively. In conclusion, the present study exhibits the first data related to the adhesion strength of A. amphitrite on rosin-based self-polishing coatings in the Aegean Sea. Moreover, based on field tests, a pseudobarnacle adhesion test methodology was developed to mimic barnacles and the correlation between barnacle and pseudobarnacle tests was examined.

Immunotoxic effects of exposure to the antifouling copper(I) biocide on target and nontarget bivalve species: a comparative in vitro study between Mytilus galloprovincialis and Ruditapes philippinarum

Edible bivalves constitute an important bioresource from an economic point of view, and studies on their immune responses to environmental pollutants are crucial for both the preservation of biodiversity and economic reasons. The worldwide diffusion of copper(I)-based antifouling paints has increased copper leaching into coastal environments and its potential impact on both target and nontarget organisms. In this study, immunotoxicity assays were carried out with short-term (60 min) cultures of hemocytes from the bivalves Mytilus galloprovincialis-a mussel dominant in the macrofouling community-and Ruditapes philippinarum-a clam dominant in the soft-sediment community-exposed to CuCl to compare the toxic effects on their immune responses. The LC50 values were similar, 40 μM (3.94 mg L-1) for the mussel and 44 μM (4.33 mg L-1) for the clam. In both species, apoptosis occurred after exposure to 1 µM (98.9 μg L-1) CuCl, the concentration able to significantly increase the intracellular Ca2+ content. Biomarkers of cell morphology and motility revealed microfilament disruption, a significant decrease in yeast phagocytosis and lysosome hydrolase (β-glucuronidase) inhibition beginning from 0.5 µM (49.5 μg L-1) CuCl in both the mussel and clam. The same concentration of CuCl affected biomarkers of oxidative stress, as a significant decrease in reduced glutathione content in the cytoplasm and inhibition of mitochondrial cytochrome-c oxidase (COX) were detected in both species. Comparison of the biomarkers showed that clam is more sensitive than the mussel regarding alterations to the lysosomal membrane and reactive oxygen species (ROS) production, which supports the potential harmful effects of antifouling biocides on the survival of nontarget pivotal species in the coastal community.

Chemical diversity and antifouling activity of geniculate calcareous algae (Corallinales, Rhodophyta) from Brazil

Marine biofouling is a natural process by which many organisms colonize and grow in submerged structures, causing serious economic consequences for the maritime industry. Geniculate calcareous algae (GCA; Corallinales, Rhodophyta) produce bioactive secondary metabolites and are a promise for new antifouling compounds. Here, we investigated the antifouling activity of four GCA species-Amphiroa beauvoisii, Jania sagittata (formerly Cheilosporum sagittatum), Jania crassa, and Jania prolifera (formerly Amphiroa flabellata)-from the Brazilian coast against macro- and microorganisms. Simultaneously, metabolomic tools were applied to assess the chemical profiles of these seaweeds using gas chromatography coupled to mass spectrometry (GC-MS). Data analysis by principal component and molecular networking analyses used the global natural products social molecular networking platform (GNPS). Our results showed that all extracts were active against different strains of marine bacteria and that the J. sagittata (JsSI) extract showed the highest percentage of bacterial inhibition. The J. sagittata (JsSI) extract was the most active against the mussel Perna perna, showing 100% byssus inhibition. Regarding toxicity, only the J. crassa (JcP) extract showed a 20% mortality rate. The chemical profiles of the evaluated GCA extracts differed qualitatively and quantitatively. Yet, the steroid (3β)-cholest-5-en-3-ol was the major compound commonly identified in all extracts, with the exception of J. sagittata (JsSI). Moreover, we observed intra- and interspecific chemical variabilities among GCA extracts for the different populations, which could explain their antifouling activity variability. This study contributed new information about the chemical compounds produced by this group of seaweeds and showed its antifouling potential. These GCA species may be the subject of future studies to obtain new bioactive compounds with biotechnological potential in maritime areas.

Mode of action of antifouling compound albofungin in inhibiting barnacle larval settlement

Marine biofouling causes huge economic losses to the marine industry every year. Albofungin is a potential antifoulant showing strong anti-macrofouling activities against larval settlement of major fouling organisms. In the present study, directed RNA-seq and proteomic analyses were used to investigate changes in the transcriptome and proteome of a major fouling barnacle Amphibalanus amphitrite cyprids in response to albofungin treatment. Results showed that albofungin treatment remarkably upregulated the metabolism of xenobiotics by the cytochrome P450 pathway to discharge the compound and downregulated energy metabolic processes. Intriguingly, immunostaining and whole-mount in situ hybridization (WISH) revealed the spatial expression patterns of selected differentially expressed genes (glutathione S-transferase [GST], nitric oxide synthase [NOS], and calmodulin [CaM]) distributed in the thorax and antennule of A. amphitrite. Our study provides new insights into the mechanism of albofungin in interrupting the larval settlement of A. amphitrite and suggests its potential application as an antifouling agent in marine environments.

Hydrophobic DES Based on Menthol and Natural Organic Acids for Use in Antifouling Marine Coatings

Marine biofouling negatively impacts industries with off-shore infrastructures, such as naval, oil, and aquaculture. To date, there are no ideal sustainable, economic, and environmentally benign solutions to deal with this phenomenon. The advances achieved in green solvents, as well as its application in different industries, such as pharmaceutical and biotechnology, have promoted the emergence of deep eutectic systems (DES). These eutectic systems have applications in various fields and can be revolutionary in the marine-based industrial sector. In this study, the main objective was to investigate the potential use of hydrophobic DES (HDES) based on menthol and natural organic acids for their use as marine antifouling coatings. Our strategy encompassed the physicochemical characterization of different formulations, which allowed us to identify the most appropriate molar ratio and intermolecular interactions for HDES formations. The miscibility of the resulting HDES with the marine coating has been evaluated and proven to be successful. The Men/OL (1:1) system proved to be the most promising in terms of cost-production and thus was the one used in subsequent antifouling tests. The cytotoxicity of this HDES was evaluated using an in vitro cell model (HaCat cells) showing no significant toxicity. Furthermore, the application of this system incorporated into coatings that are used in marine structures was also studied using marine species (Mytilus edulis mussels and Patella vulgata limpets) to evaluate both their antifouling and ecotoxicity effects. HDES Men/OL (1:1) incorporated in marine coatings was promising in reducing marine macrofouling and also proved to be effective at the level of microfouling without viability impairment of the tested marine species. It was revealed to be more efficient than using copper oxide, metallic copper, or ivermectin as antifouling agents. Biochemical assays performed on marine species showed that this HDES does not induce oxidative stress in the tested species. These results are a strong indication of the potential of this HDES to be sustainable and efficiently used in marine fouling control technologies.

Development of Antifouling Strategies for Marine Applications

Marine biofouling is an undeniable challenge for aquatic systems since it is responsible for several environmental and ecological problems and economic losses. Several strategies have been developed to mitigate fouling-related issues in marine environments, including developing marine coatings using nanotechnology and biomimetic models, and incorporating natural compounds, peptides, bacteriophages, or specific enzymes on surfaces. The advantages and limitations of these strategies are discussed in this review, and the development of novel surfaces and coatings is highlighted. The performance of these novel antibiofilm coatings is currently tested by in vitro experiments, which should try to mimic real conditions in the best way, and/or by in situ tests through the immersion of surfaces in marine environments. Both forms present their advantages and limitations, and these factors should be considered when the performance of a novel marine coating requires evaluation and validation. Despite all the advances and improvements against marine biofouling, progress toward an ideal operational strategy has been slow given the increasingly demanding regulatory requirements. Recent developments in self-polishing copolymers and fouling-release coatings have yielded promising results which set the basis for the development of more efficient and eco-friendly antifouling strategies.

Ship Hull-Fouling Diatoms on Korean Research Vessels Revealed by Morphological and Molecular Methods, and Their Environmental Implications

Ship biofouling is one of the main vectors for the introduction and global spread of non-indigenous organisms. Diatoms were the early colonizers of ship hulls; however, their community composition on ships is poorly understood. Herein, we investigated the diatom community on the hull samples collected from two Korean research vessels Isabu (IRV) and Onnuri (ORV) on September 2 and November 10, 2021, respectively. IRV showed low cell density (345 cells/cm2) compared to ORV (778 cells/cm2). We morphologically identified more than 15 species of diatoms from the two research vessels (RVs). The microalgae in both RVs were identified as Amphora, Cymbella, Caloneis, Halamphora, Navicula, Nitzschia, and Plagiogramma. Of them, the genus Halamphora was found to be predominant. However, both RVs had a varied dominant species with a significant difference in body size; Halamphora oceanica dominated at IRV, and Halamphora sp. at ORV, respectively. Molecular cloning showed similar results to morphological analysis, in which Halamphora species dominated in both RVs. The hull-attached species were distinct from species found in the water column. These results revealed diatoms communities that are associated with ship hull-fouling at an early stage of biofilm formation. Moreover, ships arriving from different regions could show some variation in species composition on their hull surfaces, with the potential for non-indigenous species introduction.

Spray-Drying Hydrophobic Cellulose Nanocrystal Coatings with Degradable Biocide Release for Marine Antifouling

With increasing awareness about the ecological environment, increased attention has been paid to the application of eco-friendly materials in the field of marine antifouling. In this work, a novel coating having good mechanical strength and static marine antifouling characteristics was fabricated using cellulose nanocrystals (CNCs) as the skeleton material, with in situ growth of SiO₂ as the basic superhydrophobic material and introducing hexadecyl trimethyl ammonium bromide (CTAB) and 4-bromo2-(4-chlorophenyl)-5-(trifluoromethyl)-1H-pyrrole-3-carbonitrile (Econea) into the coating. Due to the high strength and rod structure of CNCs, the coating maintained super-hydrophobicity after 50 cycles of abrasion tests. Moreover, the addition of CTAB during the synthesis of SiO₂ led to the hydrolysis and polycondensation of tetraethyl orthosilicate at the micellar interface. Econea was fully mixed with SiO₂ nanoparticles, thus slowing down the rate of release of Econea. Meanwhile, the adhesion between the coating and the substrate reached 1.9 MPa, which can meet the application requirements for marine environments. The bioassay using bacteria (Escherichia coli) and diatoms (Nitzschia closterium) showed that the rate of inhibition of the coating on bacteria and diatoms could reach 99 and 90%, respectively, after immersion in artificial seawater for 28 days. This research provides a facile and promising fabricating solution of an eco-friendly CNC-based coating having strong antifouling characteristics suitable for marine environments.

Marine biofouling and the role of biocidal coatings in balancing environmental impacts

Marine biofouling is a global problem affecting various industries, particularly the shipping industry due to long-distance voyages across various ecosystems. Therein fouled hulls cause increased fuel consumption, greenhouse gas emissions, and the spread of invasive aquatic species. To counteract these issues, biofouling management plans are employed using manual cleaning protocols and protective coatings. This review provides a comprehensive overview of adhesion strategies of marine organisms, and currently available mitigation methods. Further, recent developments and open challenges of antifouling (AF) and fouling release (FR) coatings are discussed with regards to the future regulatory environment. Finally, an overview of the environmental and economic impact of fouling is provided to point out why and when the use of biocidal solutions is beneficial in the overall perspective.

Application of Nanozymes in Environmental Monitoring, Management, and Protection

Nanozymes are nanomaterials with enzyme-like activity, possessing the unique properties of nanomaterials and natural enzyme-like catalytic functions. Nanozymes are catalytically active, stable, tunable, recyclable, and versatile. Therefore, increasing attention has been paid in the fields of environmental science and life sciences. In this review, we focused on the most recent applications of nanozymes for environmental monitoring, environmental management, and environmental protection. We firstly introduce the tuning catalytic activity of nanozymes according to some crucial factors such as size and shape, composition and doping, and surface coating. Then, the application of nanozymes in environmental fields are introduced in detail. Nanozymes can not only be used to detect inorganic ions, molecules, organics, and foodborne pathogenic bacteria but are also involved in the degradation of phenolic compounds, dyes, and antibiotics. The capability of nanozymes was also reported for assisting air purification, constructing biofuel cells, and application in marine antibacterial fouling removal. Finally, the current challenges and future trends of nanozymes toward environmental fields are proposed and discussed.

Identifying optimal photovoltaic technologies for underwater applications

Improving solar energy collection in aquatic environments would allow for superior environmental monitoring and remote sensing, but the identification of optimal photovoltaic technologies for such applications is challenging as evaluation requires either field deployment or access to large water tanks. Here, we present a simple bench-top characterization technique that does not require direct access to water and therefore circumvents the need for field testing during initial trials of development. Employing LEDs to simulate underwater solar spectra at various depths, we compare Si and CdTe solar cells, two commercially available technologies, with GaInP cells, a technology with a wide bandgap close to ideal for underwater solar harvesting. We use this method to show that while Si cells outperform both CdTe and GaInP cells under terrestrial AM1.5G solar irradiance, CdTe and GaInP cells outperform Si cells at depths >2 m, with GaInP cells operating with underwater efficiencies approaching 54%.

•

A bench-top characterization technique for testing underwater solar cells is presented

•

Underwater solar irradiance spectra at varying depths were reproduced with LEDs

•

GaInP solar cells outperformed Si and CdTe, with efficiencies approaching 54%

Material type influences the abundance but not richness of colonising organisms on marine structures

Urbanisation of coastal areas and growth in the blue economy drive the proliferation of artificial structures in marine environments. These structures support distinct ecological communities compared to natural hard substrates, potentially reflecting differences in the materials from which they are constructed. We undertook a meta-analysis of 46 studies to compare the effects of different material types (natural or eco-friendly vs. artificial) on the colonising biota on built structures. Neither the abundance nor richness of colonists displayed consistent patterns of difference between artificial and natural substrates or between eco-friendly and standard concrete. Instead, there were differences in the abundance of organisms (but not richness) between artificial and natural materials, that varied according to material type and by functional group. When compared to biogenic materials and rock, polymer and metal supported significantly lower abundances of total benthic species (in studies assessing sessile and mobile species together), sessile invertebrates and corals (in studies assessing these groups individually). In contrast, non-indigenous species were significantly more abundant on wood than metal. Concrete supported greater abundances of the general community, including habitat-forming species, compared to wood. Our results suggest that the ecological requirements of the biological community, alongside economic, logistic and engineering factors should be considered in material selection for multifunctional marine structures that deliver both engineering and ecological (enhanced abundance and diversity) benefits.

Sunlight-active phytol-ZnO@TiO2 nanocomposite for photocatalytic water remediation and bacterial-fouling control in aquaculture: A comprehensive study on safety-level assessment

With a growing consciousness of the importance of nature stewardship, researchers are focusing their efforts on utilizing renewable energy, particularly solar energy, to address environmental concerns. In this context, photocatalysis has long been viewed as one of the most promising cleaning methods. Hence, we have prepared a sunlight-active phytol-assisted ZnO-TiO₂ nanocomposite (PZTN) for photocatalytic bacterial deactivation and dye degradation process. The PZTN-photocatalysis effectively deactivated the bacterial pathogens as well as malachite green dye within 240 min under direct-sunlight. Moreover, this will be the first complete study on safety level assessment of photocatalytically-remediated water through toxicity studies. The obtained results evidenced that photocatalytically-deactivated bacteria and MG-dye showed to have no toxic effects, signifying that the PZTN-photocatalyzed water seems to be extremely safe for the environment. As a result of this research, we suggest that the PZTN could be a promising sunlight-active photocatalyst for environmental water treatment. On the other hand, biofouling is a ubiquitous phenomenon in the marine environment. Bacteria are the first organisms to foul surfaces and produce biofilms on man-made submerged materials. Interestingly, PZTN-coated PVC plastic-films effectively disallowed biofilms on their surface. This part of this research suggests that PZTN coated PVC-plastics are the best alternative for biofouling management.

Use of Nanotechnology to Mitigate Biofouling in Stainless Steel Devices Used in Food Processing, Healthcare, and Marine Environments

In humid environments, the formation of biofilms and microfouling are known to be the detrimental processes that first occur on stainless steel surfaces. This is known as biofouling. Subsequently, the conditions created by metabolites and the activity of organisms trigger corrosion of the metal and accelerate corrosion locally, causing a deterioration in, and alterations to, the performance of devices made of stainless steel. The microorganisms which thus affect stainless steel are mainly algae and bacteria. Within the macroorganisms that then damage the steel, mollusks and crustaceans are the most commonly observed. The aim of this review was to identify the mechanisms involved in biofouling on stainless steel and to evaluate the research done on preventing or mitigating this problem using nanotechnology in humid environments in three areas of human activity: food manufacturing, the implantation of medical devices, and infrastructure in marine settings. Of these protective processes that modify the steel surfaces, three approaches were examined: the use of inorganic nanoparticles; the use of polymeric coatings; and, finally, the generation of nanotextures.

Crawling and adhesion behavior of Halamphora sp. based on different parts of Folium Sennae-like film: Evaluation of analytical methods for anti-diatom experimental results

Anti-diatom testing is a basic method to evaluate the anti-fouling performance of coatings. Many existing results of anti-diatom performances are evaluated based on their attachment number or coverage area, ignoring the influence of the crawling and adhesion behavior of diatoms on the analysis results. Here, a Folium Sennae-like film with multiple structural units was prepared by considering the influence of diatom attachment behaviors on the analysis results. The anti-diatom performances of different parts (divided and called four parts: edge, surface, cross striation, and vertical pattern) on the Folium Sennae-like film were evaluated using the counting and area methods. Obviously, the anti-diatom performance of the Folium Sennae-like film was superior to that of epoxy resin without structure. Under equal areas, the average numbers of diatoms on the cross striation and the vertical pattern were similar to the surface. It was found that the attachment behavior of Halamphora sp. is affected by microstructure units, rather than the combined structure of which the scale is much larger than that of diatoms. Meanwhile, the average attachment area for the unit number of diatoms was calculated. The diatom attachment area without microstructure, surface, cross striation, or vertical pattern was 81.751, 106.950, 73.904, and 84.376 μm², respectively. Moreover, the static and dynamic motion behaviors of Halamphora sp. were studied, and the theory for Halamphora sp. attachment was modeled in three dimensions. The variable morphology of Halamphora sp. lead to inaccurate results for diatom analyses based on the counting and area methods, which is summarized here. This study discusses the evaluation method of coatings by anti-diatom performance, further promoting the research of diatoms in the field of antifouling.

Assessment of the environmental compatibility and antifouling performance of an innovative biocidal and foul-release multifunctional marine coating

The control of marine biofouling has raised serious environmental concerns, thus the continuous release of toxic and persistent biocidal agents applied as anti-biofouling coatings have triggered the search for non-toxic strategies. However, most of them still lack rigorous evaluation of their ecotoxicity and antifouling effects under real scenarios and their correlation with simulated assays. In this work, the biocide releasing risk and ecotoxicity of a biocidal and foul-release polydimethylsiloxane (PDMS)-based marine coating containing grafted Econea biocide (<0.6 wt.%) were evaluated under simulated real mechanical wear conditions at a pilot-scale system, and under extreme wear scenarios (washability settings). The coating system demonstrated low environmental impact against the model Vibrio fischeri bacterium and marine algae, associated with the effective biocide grafting in the coating matrix and subsequent biocide release minimization. This multifunctional coating system also showed auspicious antifouling (AF) effects, with an AF performance index significantly higher (API > 89) than a single foul-release system (AF < 40) after two and half years at a real immersion scenario in the Portuguese shore of the Atlantic Ocean. These field results corroborated the antibiofilm performance evaluated with Pseudoalteromonas tunicata at simulated dynamic marine conditions after seven-week assays. This eco-friendly multifunctional strategy, validated by both simulated testing conditions and real field tests, is believed to be a powerful tool for the development of AF technologies and a potential contribution to the quest for new environmentally friendly antifouling solutions.

Understanding the Fundamental Basis for Biofilm Formation on Plastic Surfaces: Role of Conditioning Films

Conditioning films (CFs) are surface coatings formed by the adsorption of biomolecules from the surrounding environment that can modify the material-specific surface properties and precedes the attachment of microorganisms. Hence, CFs are a biologically relevant identity that could govern the behavior and fate of microplastics in the aquatic environment. In the present study, polyethylene terephthalate (PET) and polylactic acid (PLA) plastic cards were immersed in natural seawater to allow the formation of CFs. The changes in the surface roughness after 24 h were investigated by atomic force microscopy (AFM), and the surface changes were visualized by scanning electron microscopy (SEM). The global elemental composition of the conditioned surface was investigated by energy dispersive spectroscopy (EDS). Results indicated that marine conditioning of PET and PLA samples for 24 h resulted in an increase of ∼11 and 31% in the average surface roughness, respectively. SEM images revealed the attachment of coccoid-shaped bacterial cells on the conditioned surfaces, and the accumulation of salts of sodium and phosphate-containing precipitates was revealed through the EDS analysis. The results indicate that the increase in surface roughness due to conditioning is linked to a material’s hydrophilicity leading to a rapid attachment of bacteria on the surfaces. Further investigations into the CFs can unfold crucial knowledge surrounding the plastic-microbe interaction that has implications for medical, industrial, and environmental research.

Biomimetic and bioinspired surface topographies as a green strategy for combating biofouling: a review

Biofouling refers to the adverse attachment and colonization of fouling organisms, including macromolecules, bacteria, and sessile invertebrates, on the surfaces of materials submerged in aquatic environments. Almost all structures working in watery surroundings, from marine infrastructures to healthcare facilities, are affected by this sticky problem, resulting in massive direct and indirect economic loss and enormous cost every year in protective maintenance and remedial cleaning. Traditional approaches to preventing marine biofouling primarily rely on the application of biocide-contained paints, which certainly impose adverse effects on the ocean environment and marine ecology. Biomimicry offers an efficient shortcut to developing environmentally friendly antifouling techniques and has yielded encouraging and promising results. The antifouling strategies learned from nature can be broadly classified into two categories according to the nature of the cues applied for biofouling control. One is the chemical antifouling techniques, which are dedicated to extracting the effective antifoulant compounds from marine organisms and synthesizing chemicals mimicking natural antifoulants. In contrast, the physical biomimetic (BM) antifouling practices focus on the emulation and optimization of the physical cues such as micro and nanoscale surface topographies learned from naturally occurring surfaces for better antifouling efficacy. In this review, a synopsis of the techniques for manufacturing the BM and bioinspired (BI) antifouling surface topographies is introduced, followed by the bioassay to assess the antifouling performance of the structured surfaces. Then, the BM and BI surface topographies that were reported to possess enhanced antifouling competence are introduced, followed by a summary of theoretical modeling. The whole paper is concluded by summarizing the studies' deficiencies so far and outlooking the research directions in the future.

Amphiphilic Zwitterionic Acrylate/Methacrylate Copolymers for Marine Fouling-Release Coatings

Methacrylate and acrylate monomers are popular building blocks for antifouling (AF) and fouling-release (FR) coatings to counteract marine biofouling. They are used in various combinations and often combined into amphiphilic materials. This study investigated the FR properties of amphiphilic ethylene glycol dicyclopentenyl ether acrylate (DCPEA) and the corresponding methacrylate (DCPEMA) blended with 5 wt % zwitterionic carboxybetaine acrylate (CBA) and the corresponding methacrylate (CBMA). A series of (co)polymers with different acrylate/methacrylate compositions were synthesized and tested against the attachment of the diatom Navicula perminuta and in short-term dynamic field exposure experiments. The more hydrophobic methacrylate DCPEMA homopolymer outperformed its acrylate counterpart DCPEA. Incorporated zwitterionic functionality of both CBMA and CBA imparted ultralow fouling capability in the amphiphilic polymers toward diatom attachment, whereas in the real ocean environment, only the employment of CBMA reduced marine biofouling. Moreover, it was observed that CBA-containing coatings showed different surface morphologies and roughnesses compared to the CBMA analogues. Particularly, a high impact was found when acrylic CBA was mixed with methacrylic DCPEMA. While the wettability of the coatings was comparable, investigated methacrylates in general exhibited superior fouling resistance compared to the acrylates.

Impacts of a temperate to tropical voyage on the microalgal hull fouling community of an atypically-operated vessel

Microalgal communities that colonize the hulls of at-risk vessels - those which have the highest port residency times, lowest speeds, and most stationary time in water - are expected to change as a function of environmental factors during ocean voyages, but are rarely studied. The microalgal communities on the hull of an atypically operated ship, the T.S. Golden Bear, were quantified during the course of a voyage from San Francisco Bay to the South Pacific and back. Here we clearly demonstrate that microalgal communities can be highly resilient, and can survive physiologically strenuous journeys through extreme variation in salinity and temperature. A 42% reduction in microalgal biomass and a 62% reduction in algal cellular abundance indicated a community-wide negative reaction to an increase in both salinity and temperature after the ship left San Francisco Bay, CA and cruised southward to Long Beach, although in vivo cellular fluorescence capacity increased. Further reductions in biomass (36%) and cellular abundance (26%) occurred once the ship encountered high-temperature, high-salinity waters in Hawaii. A 17% reduction of cellular fluorescence capacity was also observed in Hawaii. Despite previous environmental stressors, upon return to temperate waters off Vallejo, CA, biomass increased 230%, cellular abundance remained stable, and cellular fluorescence capacity increased from 0.45 ± 0.26 to 0.60 ± 0.07. The methods used in the current research provide efficient, cost-effective procedures for analyzing microalgal (and macrofouling) communities, which can in turn aid regulators in creating such necessary thresholds for enforcement.

Antimicrobial Ceramic Filters for Water Bio-Decontamination

Bio-contamination of water through biofouling, which involves the natural colonization of submerged surfaces by waterborne organisms, is a global socio-economic concern, allied to premature materials bio-corrosion and high human health risks. Most effective strategies release toxic and persistent disinfectant compounds into the aquatic medium, causing environmental problems and leading to more stringent legislation regarding their use. To minimize these side effects, a newly non-biocide-release coating strategy suitable for several polymeric matrices, namely polydimethylsiloxane and polyurethane (PU)-based coatings, was used to generate antimicrobial ceramic filters for water bio-decontamination. The best results, in terms of antimicrobial activity and biocide release, showed an expressed delay and a decrease of up to 66% in the population of methicillin-resistant Staphylococcus aureus bacteria on ceramic filters coated with polyurethane (PU)-based coatings containing grafted Econea biocide, and no evidence of biocide release after being submerged for 45 days in water. Biocidal PU-based surfaces were also less prone to Enterococcus faecalis biofilm formation under flow conditions with an average reduction of 60% after 48 h compared to a pristine PU-based surface. Biocidal coated filters show to be a potential eco-friendly alternative for minimizing the environmental risks associated with biofouling formation in water-based industrial systems.

Anti-algal activity of the 12-5-12 gemini surfactant results from its impact on the photosynthetic apparatus

A rapid amplification of algal population has a negative impact on the environment and the global economy. Thus, control of algal proliferation is an important issue and effective procedures which reduce algal blooms and control algal fouling are highly desired. Gemini surfactants are considered to have a low environmental impact, therefore they seem to be a promising group of detergents which could reduce algal blooms in water systems. Furthermore, due to their emulsifying properties they could replace algaecides added to antifouling paints and decrease algae adhesion to various surfaces. In this study the toxic effect of the 12-5-12 gemini surfactant was investigated on Chlorella cells and close attention was paid to a potential mechanism of its action. At the high cell density (10.05 × 10⁷ cells/mL) a dose-dependent cell death was found and the IC₅₀ value was reached at the concentration of 19.6 µmol/L after 72-h exposure to the surfactant. The decrease in chlorophyll autofluorescence shows that the photosynthetic apparatus seems to be the target of the tested compound. The presented studies indicate that gemini surfactants could effectively reduce algal blooms in water systems, and if added to paints, they could decrease algal growth on external building walls or other water immersed surfaces.

Fate of lost fishing gears: Experimental evidence of biofouling colonization patterns from the northwestern Mediterranean Sea

ALDFGs (abandoned, lost or otherwise discharged fishing gears) represent a major pollutant in the world's oceans, including the Mediterranean Sea, but very little is known about their long-term fate in the underwater environment. Here we investigate the destiny of ALDFGs in a coralligenous benthic community by studying the biofouling growing on them at 30 m depth over a three-year period. Results indicate that ALDFGs are quickly covered by biofouling, reaching maximum values of cover in one year. At this depth, the biofouling community results highly influenced by light-dependent seasonal cycles and a general four-steps colonization scheme is tentatively depicted: i) biofouling community is initially dominated by fast-growing organisms, with algae and hydrozoans settling after two weeks; ii) small-sized carbonatic organisms (e.g. bryozoans) appear after two months; iii) the same organisms (including coralline algae) become abundant after five to eight months; iv) conspicuous carbonatic skeletons (serpulids, bivalves and bryozoans) occur after one year increasing in complexity in the following months. The biofouling settled on ALDFGs, as well as growth rates of large carbonatic species, could provide useful information to estimate the age of lost lines and nets in retrieved material and in situ photo footage complementing the overview of the fishing impact in this specific environment. Finally, no signs of nylon degradation are reported, suggesting that the prevailing physical conditions and the biofouling cover extent could alter microplastics release from nylon ALDFGs.

Understanding the Fundamental Basis for Biofilm Formation on Plastic Surfaces: Role of Conditioning Films

Conditioning films (CFs) are surface coatings formed by the adsorption of biomolecules from the surrounding environment that can modify the material-specific surface properties and precedes the attachment of microorganisms. Hence, CFs are a biologically relevant identity that could govern the behavior and fate of microplastics in the aquatic environment. In the present study, polyethylene terephthalate (PET) and polylactic acid (PLA) plastic cards were immersed in natural seawater to allow the formation of CFs. The changes in the surface roughness after 24 h were investigated by atomic force microscopy (AFM), and the surface changes were visualized by scanning electron microscopy (SEM). The global elemental composition of the conditioned surface was investigated by energy dispersive spectroscopy (EDS). Results indicated that marine conditioning of PET and PLA samples for 24 h resulted in an increase of ∼11 and 31% in the average surface roughness, respectively. SEM images revealed the attachment of coccoid-shaped bacterial cells on the conditioned surfaces, and the accumulation of salts of sodium and phosphate-containing precipitates was revealed through the EDS analysis. The results indicate that the increase in surface roughness due to conditioning is linked to a material's hydrophilicity leading to a rapid attachment of bacteria on the surfaces. Further investigations into the CFs can unfold crucial knowledge surrounding the plastic-microbe interaction that has implications for medical, industrial, and environmental research.

Antifouling Technology Trends in Marine Environmental Protection

Marine fouling is a worldwide problem, which is harmful to the global marine ecological environment and economic benefits. The traditional antifouling strategy usually uses toxic antifouling agents, which gradually exposes a serious environmental problem. Therefore, green, long-term, broad-spectrum and eco-friendly antifouling technologies have been the main target of engineers and researchers. In recent years, many eco-friendly antifouling technologies with broad application prospects have been developed based on the low toxicity and non-toxicity antifouling agents and materials. In this review, contemporary eco-friendly antifouling technologies and materials are summarized into bionic antifouling and non-bionic antifouling strategies (2000-2020). Non-bionic antifouling technologies mainly include protein resistant polymers, antifoulant releasing coatings, foul release coatings, conductive antifouling coatings and photodynamic antifouling technology. Bionic antifouling technologies mainly include the simulated shark skin, whale skin, dolphin skin, coral tentacles, lotus leaves and other biology structures. Brief future research directions and challenges are also discussed in the end, and we expect that this review would boost the development of marine antifouling technologies.

Regenerating heavily biofouled dissolved oxygen sensors using bacterial viruses

Bacterial biofilms are aggregates of bacterial cells embedded in a self-produced extracellular polymeric matrix. Biofilm formation has always been considered a major challenge for sensors used in underwater measurements, and is a primary source of measurement error, especially when it comes to long-term in situ monitoring. We demonstrate the utility of lytic bacteriophages (bacterial viruses) as a non-invasive strategy for removing bacterial biofilms formed on the gas permeable membrane of electrochemical dissolved oxygen sensors. Our results show that a 4 day Pseudomonas aeruginosa biofilm with a fully developed matrix significantly affected the sensor signal and response time, decreasing the signal by 32% and increasing the response time by 94%. In addition, measurements with the biofouled membrane had a very low signal to nose ratio compared to a clean sensor membrane. A single dose of overnight phage treatment effectively removed the biofilm (as indicated by scanning electron micrographs and fluorescence images of the membrane), without the need for repeated treatments. Furthermore, the sensor signal that had plummeted by 32% for a fully biofouled membrane, was returned to the original value (7.96 ± 0.27 mg L⁻¹) after phage treatment and the signal to noise ratio (calculated as the ratio of mean to standard deviation) increased 8 folds for a phage-treated membrane compared to a biofouled membrane. Our data indicate near complete regeneration and signal recovery for the dissolved oxygen sensor, making the biofouled sensor reusable without the use of harsh chemicals that could destroy the fragile sensor membrane.

Lytic bacteriophages can be utilized as a non-invasive method for removing bacterial biofilms formed on the surface of gas permeable membranes of dissolved oxygen sensors.

Effect of Dipole Orientation in Mixed, Charge-Equilibrated Self-assembled Monolayers on Protein Adsorption and Marine Biofouling

While zwitterionic interfaces are known for their excellent low-fouling properties, the underlying molecular principles are still under debate. In particular, the role of the zwitterion orientation at the interface has been discussed recently. For elucidation of the effect of this parameter, self-assembled monolayers (SAMs) on gold were prepared from stoichiometric mixtures of oppositely charged alkyl thiols bearing either a quaternary ammonium or a carboxylate moiety. The alkyl chain length of the cationic component (11-mercaptoundecyl)-N,N,N-trimethylammonium, which controls the distance of the positively charged end group from the substrate's surface, was kept constant. In contrast, the anionic component and, correspondingly, the distance of the negatively charged carboxylate groups from the surface was varied by changing the alkyl chain length in the thiol molecules from 7 (8-mercaptooctanoic acid) to 11 (12-mercaptododecanoic acid) to 15 (16-mercaptohexadecanoic acid). In this way, the charge neutrality of the coating was maintained, but the charged groups exposed at the interface to water were varied, and thus, the orientation of the dipoles in the SAMs was altered. In model biofouling studies, protein adsorption, diatom accumulation, and the settlement of zoospores were all affected by the altered charge distribution. This demonstrates the importance of the dipole orientation in mixed-charged SAMs for their inertness to nonspecific protein adsorption and the accumulation of marine organisms. Overall, biofouling was lowest when both the anionic and the cationic groups were placed at the same distance from the substrate's surface.

Advanced Numerical Method for Determining the Wetted Area of Container Ships for Increased Estimation Accuracy of Copper Biocide Emissions

Research into the consequences of the accumulation of copper biocides in the marine environment has intensified since the ban on the use of organotin tributyltin (TBT) and the introduction of copper-based compounds in antifouling (AF) coatings. The specific emission of copper biocides and the surface of the wetted area of a vessel are the key parameters for the estimation of biocide emission. The estimated values of specific emissions of copper biocides should be taken with caution and their limitations and suitability for various surfaces and types of vessel should be known. Baseline limitations are also present in determining vessels’ wetted area. The available models do not provide realistic values, allowing multiple deviations. The proposed method of determining the wetted area considering container vessels and the specifics of their forms results in a set of hydrostatic diagrams that enable much more accurate estimation. The use of Automatic Identification System (AIS) is also proposed in terms of independent collection of required calculation parameters, enabling a full assessment of the total emission of copper biocides from container ships in the observed area.

One Step Forward towards the Development of Eco-Friendly Antifouling Coatings: Immobilization of a Sulfated Marine-Inspired Compound

Marine biofouling represents a global economic and ecological challenge and few eco-friendly antifouling agents are available. The aim of this work was to establish the proof of concept that a recently synthesized nature-inspired compound (gallic acid persulfate, GAP) can act as an eco-friendly and effective antifoulant when immobilized in coatings through a non-release strategy, promoting a long-lasting antifouling effect. The synthesis of GAP was optimized to provide quantitative yields. GAP water solubility was assessed, showing values higher than 1000 mg/mL. GAP was found to be stable in sterilized natural seawater with a half-life (DT₅₀) of 7 months. GAP was immobilized into several commercial coatings, exhibiting high compatibility with different polymeric matrices. Leaching assays of polydimethylsiloxane and polyurethane-based marine coatings containing GAP confirmed that the chemical immobilization of GAP was successful, since releases up to fivefold lower than the conventional releasing systems of polyurethane-based marine coatings were observed. Furthermore, coatings containing immobilized GAP exhibited the most auspicious anti-settlement effect against Mytilus galloprovincialis larvae for the maximum exposure period (40 h) in laboratory trials. Overall, GAP promises to be an agent capable of improving the antifouling activity of several commercial marine coatings with desirable environmental properties.

Underwater shear-based grooming of marine biofouling using a non-contact Bernoulli pad device

The biofouling removal ability of a shear-based device was tested on two submerged surface types, Garolite G-10 and Intersleek 1100SR. Each surface was groomed at four frequencies along with a control group. The seven-week grooming study was conducted in Narragansett Bay, Rhode Island. The Bernoulli pad device uses confined radial outflow to generate both surface-normal forces to grip the submerged surface and shear stress to groom the surface without contact. An image-processing algorithm was developed and used to assess the effectiveness of the various grooming protocols, along with direct measurements of chlorophyll a per surface area. The image-processing data showed that the grooming resulted in ∼50% cleanliness on the Garolite at the end of the study whereas the Intersleek was continuously restored to nearly its initial clean state. Chlorophyll a data supported these overall conclusions. These results indicate that surface cleanliness can be maintained effectively on Intersleek using frequent shear-based grooming.

Recent Advances in Mussel-Inspired Synthetic Polymers as Marine Antifouling Coatings

Synthetic oligomers and polymers inspired by the multifunctional tethering system (byssus) of the common mussel (genus Mytilus) have emerged since the 1980s as a very active research domain within the wider bioinspired and biomimetic materials arena. The unique combination of strong underwater adhesion, robust mechanical properties and self-healing capacity has been linked to a large extent to the presence of the unusual α-amino acid derivative l-DOPA (l-3,4-dihydroxyphenylalanine) as a building block of the mussel byssus proteins. This paper provides a short overview of marine biofouling, discussing the different marine biofouling species and natural defenses against these, as well as biomimicry as a concept investigated in the marine antifouling context. A detailed discussion of the literature on the Mytilus mussel family follows, covering elements of their biology, biochemistry and the specific measures adopted by these mussels to utilise their l-DOPA-rich protein sequences (and specifically the ortho-bisphenol (catechol) moiety) in their benefit. A comprehensive account is then given of the key catechol chemistries (covalent and non-covalent/intermolecular) relevant to adhesion, cohesion and self-healing, as well as of some of the most characteristic mussel protein synthetic mimics reported over the past 30 years and the related polymer functionalisation strategies with l-DOPA/catechol. Lastly, we review some of the most recent advances in such mussel-inspired synthetic oligomers and polymers, claimed as specifically aimed or intended for use in marine antifouling coatings and/or tested against marine biofouling species.

Marine Biofouling: A European Database for the Marine Renewable Energy Sector

Biofouling is a major problem shared among all maritime sectors employing submerged structures where it leads to substantially increased costs and lowered operational lifespans if poorly addressed. Insight into the ongoing processes at the relevant marine locations is key to effective management of biofouling. Of specific concern for the marine renewable energy (MRE) sector is the fact that information on biofouling composition and magnitude across geographies is dispersed throughout published papers and consulting reports. To enable rapid access to relevant key biofouling events the present work describes a European biofouling database to support the MRE sector and other maritime industries. The database compiles in one document qualitative and quantitative data for challenging biofouling groups, including non-native species associated with MRE and related marine equipment, in different European Ecoregions. It provides information on the occurrence of fouling species and data on key biofouling parameters, such as biofouling thickness and weight. The database aims to aid the MRE sector and offshore industries in understanding which biofouling communities their devices are more susceptible to at a given site, to facilitate informed decisions. In addition, the biofouling mapping is useful for the development of biosecurity risk management plans as well as academic research.

Highly Branched Copolymers with Degradable Bridges for Antifouling Coatings

The antifouling properties of traditional self-polishing marine antifouling coatings are mainly achieved based on their hydrolysis-sensitive side groups or the degradable polymer main chains. Here, we prepared a highly branched copolymer for self-polishing antifouling coatings, in which the primary polymer chains are bridged by degradable fragments (poly-ε-caprolactone, PCL). Owing to the partial or complete degradation of PCL fragments, the remaining coating on the surface can be broken down and eroded by seawater. Finally, the polymeric surface is self-polished and self-renewed. The designed highly branched copolymers were successfully prepared by reversible complexation mediated polymerization (RCMP), and their primary main chains had an M_n of approximately 3410 g·mol^-1. The hydrolytic degradation results showed that the degradation of the copolymer was controlled, and the degradation rate increased with increasing contents of degradable fragments. The algae settlement assay tests indicated that the copolymer itself has some antibiofouling ability. Moreover, the copolymer can serve as a controlled release matrix for antifoulant 4,5-dichloro-2-octylisothiazolone (DCOIT), and the release rate increases with the contents of degradable fragments. The marine field tests confirmed that these copolymer-based coatings exhibited excellent antibiofouling ability for more than 3 months. The current copolymer is derived from commonly used monomers and an easily conducted polymerization method. Hence, we believe this method may offer innovative insights into marine antifouling applications.

Random array of inorganic nanoparticles on polymer surface for anti-biofouling property through cost-effective and high-performance dip-coating

Anti-biofouling treatment is required in various fields such as biomedical application, construction, civil engineering, and so on. Currently available techniques such as lithography and replica methods have several limitations in application and accessibility. We introduced a simple, biocompatible, and cost-effective anti-biofouling dip-coating method with polyurethane-inorganic (anisotropic montmorillonite and spherical TiO₂) hybrid coating agent. Layer thickness of coating was as thin as 5 μm. It was cross-confirmed with thickness gauge and cross-section scanning electron microscopy. Through atomic force microscopy, inorganic nanoparticles were observed to be randomly arrayed with particles partially embedded in the polyurethane network. The calculated surface roughness of inorganic-polyurethane hybrid coating was five times larger than the neat substrate film and three times larger than coating without inorganic nanoparticles. Surface energy of the inorganic-polyurethane film decreased with increasing surface roughness as random pattern of inorganic particle reduced van der Waals interaction. Biofouling efficacy was evaluated by mucin adsorption and consecutive alcian blue assay. Results showed that coated film decreased biofouling 81% compared to bare film.

Synthesis and fouling resistance of capsaicin derivatives containing amide groups

Capsaicin, which inhibits the attachment and growth of fouling organisms, is a bioactive substance that is generally recognized as a highly active environmental algaecide agent. Its derivatives are simple in structure and have been proven to have low toxicity and be environmentally friendly. Six capsaicin derivatives were synthesized via Friedel-Crafts alkylation and characterized using melting point (MP) analysis, infrared (IR) spectroscopy, nuclear magnetic resonance (¹H NMR) spectroscopy and high-resolution mass spectrometry (HRMS). The inhibition effect and toxicity of these compounds towards Phaeodactylum tricornutum (P. tricornutum), Skeletonema costatum (S. costatum) and Chaetoceros curvisetus (C. curvisetus) were tested. The capsaicin derivatives all showed inhibitory effects. In particular, compound E with over 95% (3 mg·L^-1) inhibition and intermediate toxicity was superior to the other compounds, reflecting an environmentally friendly effect. This finding indicates that capsaicin derivatives possess the potential to become environmentally friendly algaecide agents. The fouling resistance of capsaicin derivatives incorporated into the coatings as antifouling agents was measured in the marine environment. The results showed that capsaicin derivatives possess excellent fouling resistance, with only a small amount of algae and muck attached to the tested panel at 90 days. The above results provide a scientific basis for the application of capsaicin derivatives as environmentally friendly antifouling agents.

The Role of Biofilms Developed under Different Anthropogenic Pressure on Recruitment of Macro-Invertebrates

Microbial biofilms can be key mediators for settlement of macrofoulers. The present study examines the coupled effects of microbial biofilms and local environmental conditions on the composition, structure and functioning of macrofouling assemblages. Settlement of invertebrates over a gradient of human-impacted sites was investigated on local biofilms and on biofilms developed in marine protected areas (MPAs). Special attention was given to the presence of non-indigenous species (NIS), a global problem that can cause important impacts on local assemblages. In general, the formation of macrofouling assemblages was influenced by the identity of the biofilm. However, these relationships varied across levels of anthropogenic pressure, possibly influenced by environmental conditions and the propagule pressure locally available. While the NIS Watersipora subatra seemed to be inhibited by the biofilm developed in the MPA, Diplosoma cf. listerianum seemed to be attracted by biofilm developed in the MPA only under mid anthropogenic pressure. The obtained information is critical for marine environmental management, urgently needed for the establishment of prevention and control mechanisms to minimize the settlement of NIS and mitigate their threats.

The Relative Importance of Shear Forces and Surface Hydrophobicity on Biofilm Formation by Coccoid Cyanobacteria

Understanding the conditions affecting cyanobacterial biofilm development is crucial to develop new antibiofouling strategies and decrease the economic and environmental impact of biofilms in marine settings. In this study, we investigated the relative importance of shear forces and surface hydrophobicity on biofilm development by two coccoid cyanobacteria with different biofilm formation capacities. The strong biofilm-forming Synechocystis salina was used along with the weaker biofilm-forming Cyanobium sp. Biofilms were developed in defined hydrodynamic conditions using glass (a model hydrophilic surface) and a polymeric epoxy coating (a hydrophobic surface) as substrates. Biofilms developed in both surfaces at lower shear conditions contained a higher number of cells and presented higher values for wet weight, thickness, and chlorophyll a content. The impact of hydrodynamics on biofilm development was generally stronger than the impact of surface hydrophobicity, but a combined effect of these two parameters strongly affected biofilm formation for the weaker biofilm-producing organism. The antibiofilm performance of the polymeric coating was confirmed at the hydrodynamic conditions prevailing in ports. Shear forces were shown to have a profound impact on biofilm development in marine settings regardless of the fouling capacity of the existing flora and the hydrophobicity of the surface.

Environmentally Friendly Marine Antifouling Coating Based on a Synergistic Strategy

The development of environmentally friendly and long-term marine antifouling coating remains a huge challenge in the maritime industry. For this purpose, we developed a novel and efficient antifouling coating based on a synergistic strategy, incorporating contact inhibition, fouling repelling, and antifouling properties. Results demonstrated that the coating could efficiently resist the adhesion of protein, bacteria, and Navicula diatoms. More importantly, marine field tests showed the coating could efficiently inhibit biofouling for at least 8 months. This approach paves a new way for the development of environmentally friendly and long-term antifouling coating.

Antibiofilm activity of symbiotic Bacillus species associated with marine gastropods

Purpose

Generally, symbiotic marine bacteria are renowned for the synthesis of compounds with bioactive properties, and this has been documented in many previous studies. Therefore, the present study was aimed to isolate novel bacterial symbionts of gastropods that have the ability to synthesize bioactive compounds. These bioactive compounds could be used effectively as antibiofilm agents in order to overcome the problems associated with biofilm.

Methods

The bacteria associated with the surface of marine gastropods were isolated and characterized. Following this, the bacterial metabolites were extracted and their antibiofilm effect was evaluated on biofilm-forming bacteria on artificial substrates. Moreover, the biofilm-forming bacterium Alteromonas sp. was treated with the extracts of symbiotic bacteria in order to evaluate the influence of extracts over the synthesis of extracellular polymeric substance (EPS). Besides, the biologically active chemical constituents of the extracts were separated using thin-layer chromatography and subjected to gas chromatography and mass spectrometry (GC-MS) analysis for characterization.

Results

Three bacterial strains belonging to the species Bacillus firmus, Bacillus cereus and Bacillus subtilis were identified from the bacterial community associated with the gastropods. The antibiofilm assays revealed that the extract of three symbiotic bacteria significantly (p < 0.05) reduced the biofilm formation by the marine bacterium Alteromonas sp. on artificial materials. Also, the EPS synthesis by Alteromonas sp. was significantly inhibited due to symbiotic bacterial extract treatment. The chemical composition of the bioactive fraction isolated from the symbiotic bacteria extract revealed that most of the detected compounds were belonging to aromatic acid, fatty acid and carboxylic acid.

Conclusion

The results of this study clearly revealed that the bacteria belonging to the above listed Bacillus species can be considered as a promising source of natural antibiofilm agents.