Engineering supported membranes for cell biology

Lipid membranes supported by polydimethylsiloxane substrates with designed geometry

The membrane curvature of cells and intracellular compartments continuously adapts to enable cells to perform vital functions, from cell division to signal trafficking. Understanding how membrane geometry affects these processes in vivo is challenging because of the biochemical and geometrical complexity as well as the short time and small length scales involved in cellular processes. By contrast, in vitro model membranes with engineered curvature would provide a versatile platform for this investigation and applications to biosensing and biocomputing. Here, we present a strategy that allows fabrication of lipid membranes with designed shape by combining 3D micro-printing and replica-molding lithography with polydimethylsiloxane to create curved micrometer-sized scaffolds with virtually any geometry. The resulting supported lipid membranes are homogeneous and fluid. We demonstrate the versatility of the system by fabricating structures of interesting combinations of mean and Gaussian curvature. We study the lateral phase separation and how local curvature influences the effective diffusion coefficient. Overall, we offer a bio-compatible platform for understanding curvature-dependent cellular processes and developing programmable bio-interfaces for living cells and nanostructures.

Regulation of the alkyl chain of fluorescent probes to selectively target the cell membrane or mitochondria in living cells

The visualization of cell membrane and mitochondrial behavior in living cells is of great life science value, but challenging due to the lack of ideal probes. In this work, two novel fluorescent probes based on different lengths of alkyl chains were reported for selective targeting of cell membranes or mitochondria of living cells. The probe CTM (1-Octadecyl-4-[9-ethyl-6-(diphenylamino)-9H-carbazol-3-yl] pyridinium) achieved cell membrane-specific staining in cells. Moreover, the probe CTM could monitor cell membrane damage through subcellular migration. Once the cell membrane was damaged, the probe CTM migrated into the mitochondria as a signal reporter. In addition, the probe MTM (1-Dodecly-4-[9-ethyl-6-(diphenylamino)-9H-carbazol-3-yl] pyridinium) with the shorter alkyl chain bearing the same skeleton structure penetrated the cell membrane and exhibited high affinity to mitochondria. This work will provide a useful tool to visualize the behavior of cell membranes and mitochondria in living cells.

Liquid-liquid phase separation: a principal organizer of the cell's biochemical activity architecture

Numerous processes occur simultaneously in the cell both for normal function and in response to changes in the environment. The ability of cells to segregate biochemical reactions into separate compartments is essential to ensure specificity and efficiency in cellular processes. The discovery of liquid-liquid phase separation as a mechanism of compartmentalization has revised our thinking regarding the intracellular organization of molecular pathways such as signal transduction. Here, we highlight recent studies that advance our understanding of how phase separation impacts the organization of biochemical processes, with a particular focus on the tools used to study the functional impact of phase separation. In addition, we offer some of our perspectives on the pathological consequences of dysregulated phase separation in biochemical pathways.

Why Do Tethered-Bilayer Lipid Membranes Suit for Functional Membrane Protein Reincorporation?

Membrane proteins (MPs) are essential for cellular functions. Understanding the functions of MPs is crucial as they constitute an important class of drug targets. However, MPs are a challenging class of biomolecules to analyze because they cannot be studied outside their native environment. Their structure, function and activity are highly dependent on the local lipid environment, and these properties are compromised when the protein does not reside in the cell membrane. Mammalian cell membranes are complex and composed of different lipid species. Model membranes have been developed to provide an adequate environment to envisage MP reconstitution. Among them, tethered-Bilayer Lipid Membranes (tBLMs) appear as the best model because they allow the lipid bilayer to be decoupled from the support. Thus, they provide a sufficient aqueous space to envisage the proper accommodation of large extra-membranous domains of MPs, extending outside. Additionally, as the bilayer remains attached to tethers covalently fixed to the solid support, they can be investigated by a wide variety of surface-sensitive analytical techniques. This review provides an overview of the different approaches developed over the last two decades to achieve sophisticated tBLMs, with a more and more complex lipid composition and adapted for functional MP reconstitution.

Imaging methods in mechanosensing: a historical perspective and visions for the future

Over the past three decades, as mechanobiology has become a distinct area of study, researchers have developed novel imaging tools to discover the pathways of biomechanical signaling. Early work with substrate engineering and particle tracking demonstrated the importance of cell–extracellular matrix interactions on the cell cycle as well as the mechanical flux of the intracellular environment. Most recently, tension sensor approaches allowed directly measuring tension in cell–cell and cell–substrate interactions. We retrospectively analyze how these various optical techniques progressed the field and suggest our vision forward for a unified theory of cell mechanics, mapping cellular mechanosensing, and novel biomedical applications for mechanobiology.

Hybrid Live Cell–Supported Membrane Interfaces for Signaling Studies

A wide range of cell–microenvironmental interactions are mediated by membrane-localized receptors that bind ligands present on another cell or the extracellular matrix. This situation introduces a number of physical effects including spatial organization of receptor–ligand complexes and development of mechanical forces in cells. Unlike traditional experimental approaches, hybrid live cell–supported lipid bilayer (SLB) systems, wherein a live cell interacts with a synthetic substrate supported membrane, allow interrogation of these aspects of receptor signaling. The SLB system directly offers facile control over the identity, density, and mobility of ligands used for engaging cellular receptors. Further, application of various nano- and micropatterning techniques allows for spatial patterning of ligands. In this review, we describe the hybrid live cell–SLB system and its application in uncovering a range of spatial and mechanical aspects of receptor signaling. We highlight the T cell immunological synapse, junctions formed between EphA2- and ephrinA1-expressing cells, and adhesions formed by cadherin and integrin receptors.

Understanding the Unique Role of Phospholipids in the Lubrication of Natural Joints: An Interfacial Tension Study

Some solid lubricants are characterized by a layered structure with weak (van der Waals) inter-interlayer forces which allow for easy, low-strength shearing. Solid lubricants in natural lubrication are characterized by phospholipid bilayers in the articular joints and phospholipid lamellar phases in synovial fluid. The influence of the acid–base properties of the phospholipid bilayer on the wettability and properties of the surface have been explained by studying the interfacial tension of spherical lipid bilayers based on a model membrane. In this paper, we show that the phospholipid multi-bilayer can act as an effective solid lubricant in every aspect, ranging from a ‘corrosion inhibitor’ in the stomach to a load-bearing lubricant in bovine joints. We present evidence of the outstanding performance of phospholipids and argue that this is due to their chemical inertness and hydrophilic–hydrophobic structure, which makes them amphoteric and provides them with the ability to form lamellar structures that can facilitate functional sliding. Moreover, the friction coefficient can significantly change for a given phospholipid bilayer so it leads to a lamellar-repulsive mechanism under highly charged conditions. After this, it is quickly transformed to result in stable low-friction conditions.

Imaging Artificial Membranes Using High-Speed Atomic Force Microscopy

Supported lipid bilayers represent a very attractive way to mimic biological membranes, especially to investigate molecular mechanisms associated with the lateral segregation of membrane components. Observation of these model membranes with high-speed atomic force microscopy (HS-AFM) allows the capture of both topography and dynamics of membrane components, with a spatial resolution in the nanometer range and image capture time of less than 1 s. In this context, we have developed new protocols adapted for HS-AFM to form supported lipid bilayers on small mica disks using the vesicle fusion or Langmuir-Blodgett methods. In this chapter we describe in detail the protocols to fabricate supported artificial bilayers as well as the main guidelines for HS-AFM imaging of such samples.

Cell Migration in Microfluidic Devices: Invadosomes Formation in Confined Environments

The last 20 years have seen the blooming of microfluidics technologies applied to biological sciences. Microfluidics provides effective tools for biological analysis, allowing the experimentalists to extend their playground to single cells and single molecules, with high throughput and resolution which were inconceivable few decades ago. In particular, microfluidic devices are profoundly changing the conventional way of studying the cell motility and cell migratory dynamics. In this chapter we will furnish a comprehensive view of the advancements made in the research domain of confinement-induced cell migration, thanks to the use of microfluidic devices. The chapter is subdivided in three parts. Each section will be addressing one of the fundamental questions that the microfluidic technology is contributing to unravel: (i) where cell migration takes place, (ii) why cells migrate and, (iii) how the cells migrate. The first introductory part is devoted to a thumbnail, and partially historical, description of microfluidics and its impact in biological sciences. Stress will be put on two aspects of the devices fabrication process, which are crucial for biological applications: materials used and coating methods. The second paragraph concerns the cell migration induced by environmental cues: chemical, leading to chemotaxis, mechanical, at the basis of mechanotaxis, and electrical, which induces electrotaxis. Each of them will be addressed separately, highlighting the fundamental role of microfluidics in providing the well-controlled experimental conditions where cell migration can be induced, investigated and ultimately understood. The third part of the chapter is entirely dedicated to how the cells move in confined environments. Invadosomes (the joint name for podosomes and invadopodia) are cell protrusion that contribute actively to cell migration or invasion. The formation of invadosomes under confinement is a research topic that only recently has caught the attention of the scientific community: microfluidic design is helping shaping the future direction of this emerging field of research.

Spatiomechanical Modulation of EphB4-Ephrin-B2 Signaling in Neural Stem Cell Differentiation

Interactions between EphB4 receptor tyrosine kinases and their membrane-bound ephrin-B2 ligands on apposed cells play a regulatory role in neural stem cell differentiation. With both receptor and ligand constrained to move within the membranes of their respective cells, this signaling system inevitably experiences spatial confinement and mechanical forces in conjunction with receptor-ligand binding. In this study, we reconstitute the EphB4-ephrin-B2 juxtacrine signaling geometry using a supported-lipid-bilayer system presenting laterally mobile and monomeric ephrin-B2 ligands to live neural stem cells. This experimental platform successfully reconstitutes EphB4-ephrin-B2 binding, lateral clustering, downstream signaling activation, and neuronal differentiation, all in a configuration that preserves the spatiomechanical aspects of the natural juxtacrine signaling geometry. Additionally, the supported bilayer system allows control of lateral movement and clustering of the receptor-ligand complexes through patterns of physical barriers to lateral diffusion fabricated onto the underlying substrate. The results from this study reveal a distinct spatiomechanical effect on the ability of EphB4-ephrin-B2 signaling to induce neuronal differentiation. These observations parallel similar studies of the EphA2-ephrin-A1 system in a very different biological context, suggesting that such spatiomechanical regulation may be a common feature of Eph-ephrin signaling.

S-Layer Protein-Based Biosensors

The present paper highlights the application of bacterial surface (S-) layer proteins as versatile components for the fabrication of biosensors. One technologically relevant feature of S-layer proteins is their ability to self-assemble on many surfaces and interfaces to form a crystalline two-dimensional (2D) protein lattice. The S-layer lattice on the surface of a biosensor becomes part of the interface architecture linking the bioreceptor to the transducer interface, which may cause signal amplification. The S-layer lattice as ultrathin, highly porous structure with functional groups in a well-defined special distribution and orientation and an overall anti-fouling characteristics can significantly raise the limit in terms of variety and the ease of bioreceptor immobilization, compactness of bioreceptor molecule arrangement, sensitivity, specificity, and detection limit for many types of biosensors. The present paper discusses and summarizes examples for the successful implementation of S-layer lattices on biosensor surfaces in order to give a comprehensive overview on the application potential of these bioinspired S-layer protein-based biosensors.

Hybrid Biomimetic Interfaces Integrating Supported Lipid Bilayers with Decellularized Extracellular Matrix Components

This paper describes the functionalization of solid supported phospholipid bilayer with decellularized extracellular matrix (dECM) components, toward the development of biomimetic platforms that more closely mimic the cell surface environment. The dECM was obtained through a combination of chemical and enzymatic treatments of mouse adipose tissue that contains collagen, fibronectin, and glycosaminoglycans (GAGs). Using amine coupling chemistry, the dECM components were attached covalently to the surface of a supported lipid bilayer containing phospholipids with reactive carboxylic acid headgroups. The bilayer formation and the kinetics of subsequent dECM conjugation were monitored by quartz crystal microbalance with dissipation (QCM-D). Fluorescence recovery after photobleaching (FRAP) confirmed the fluidity of the membrane after functionalization with dECM. The resulting hybrid biomimetic interface supports the attachment and survival of the human hepatocyte Huh 7.5 and maintains the representative hepatocellular function. Importantly, the platform is suitable for monitoring the lateral organization and clustering of cell-binding ligands and growth factor receptors in the presence of the rich biochemical profile of tissue-derived ECM components.

Supported lipid bilayer platforms to probe cell mechanobiology

Mammalian and bacterial cells sense and exert mechanical forces through the process of mechanotransduction, which interconverts biochemical and physical signals. This is especially important in contact-dependent signaling, where ligand-receptor binding occurs at cell-cell or cell-ECM junctions. By virtue of occurring within these specialized junctions, receptors engaged in contact-dependent signaling undergo oligomerization and coupling with the cytoskeleton as part of their signaling mechanisms. While our ability to measure and map biochemical signaling within cell junctions has advanced over the past decades, physical cues remain difficult to map in space and time. Recently, supported lipid bilayer (SLB) technologies have emerged as a flexible platform to mimic and perturb cell-cell and cell-ECM junctions, allowing one to study membrane receptor mechanotransduction. Changing the lipid composition and underlying substrate tunes bilayer fluidity, and lipid and ligand micro- and nano-patterning spatially control positioning and clustering of receptors. Patterning metal gridlines within SLBs confines lipid mobility and introduces mechanical resistance. Here we review fundamental SLB mechanics and how SLBs can be engineered as tunable cell substrates for mechanotransduction studies. Finally, we highlight the impact of this work in understanding the biophysical mechanisms of cell adhesion. This article is part of a Special Issue entitled: Interactions between membrane receptors in cellular membranes edited by Kalina Hristova.

Immobilization Strategies for Functional Complement Convertase Assembly at Lipid Membrane Interfaces

The self-assembly formation of complement convertases-essential biomacromolecular complexes that amplify innate immune responses-is triggered by protein adsorption. Herein, a supported lipid bilayer platform was utilized to investigate the effects of covalent and noncovalent tethering strategies on the self-assembly of alternative pathway C3 convertase components, starting with C3b protein adsorption followed bythe addition of factors B and D. Quartz crystal microbalance-dissipation (QCM-D) experiments measured the real-time kinetics of convertase assembly onto supported lipid bilayers. The results demonstrate that the nature of C3b immobilization onto supported lipid bilayers is a key factor governing convertase assembly. The covalent attachment of C3b to maleimide-functionalized supported lipid bilayers promoted the self-assembly of functional C3 convertase in the membrane-associated state and further enabled successful evaluation of a clinically relevant complement inhibitor, compstatin. By contrast, noncovalent attachment of C3b to negatively charged supported lipid bilayers also permitted C3b protein uptake, albeit membrane-associated C3b did not support convertase assembly in this case. Taken together, the findings in this work demonstrate that the attachment scheme for immobilizing C3b protein at lipid membrane interfaces is critical for downstream C3 convertase assembly, thereby offering guidance for the design and evaluation of membrane-associated biomacromolecular complexes.

Integrin and cadherin clusters: A robust way to organize adhesions for cell mechanics

Recent studies at the nanometer scale have revealed that relatively uniform clusters of adhesion proteins (50-100 nm) constitute the modular units of cell adhesion sites in both cell-matrix and cell-cell adhesions. Super resolution microscopy and membrane protein diffusion studies both suggest that even large focal adhesions are formed of 100 nm clusters that are loosely aggregated. Clusters of 20-50 adhesion molecules (integrins or cadherins) can support large forces through avidity binding interactions but can also be disassembled or endocytosed rapidly. Assembly of the clusters of integrins is force-independent and involves gathering integrins at ligand binding sites where they are stabilized by cytoplasmic adhesion proteins that crosslink the integrin cytoplasmic tails plus connect the clusters to the cell cytoskeleton. Cooperative-signaling events can occur in a single cluster without cascading to other clusters. Thus, the clusters appear to be very important elements in many cellular processes and can be considered as a critical functional module.

How cells respond to environmental cues - insights from bio-functionalized substrates

Biomimetic materials have long been the (he)art of bioengineering. They usually aim at mimicking in vivo conditions to allow in vitro culture, differentiation and expansion of cells. The past decade has witnessed a considerable amount of progress in soft lithography, bio-inspired micro-fabrication and biochemistry, allowing the design of sophisticated and physiologically relevant micro- and nano-environments. These systems now provide an exquisite toolbox with which we can control a large set of physicochemical environmental parameters that determine cell behavior. Bio-functionalized surfaces have evolved from simple protein-coated solid surfaces or cellular extracts into nano-textured 3D surfaces with controlled rheological and topographical properties. The mechanobiological molecular processes by which cells interact and sense their environment can now be unambiguously understood down to the single-molecule level. This Commentary highlights recent successful examples where bio-functionalized substrates have contributed in raising and answering new questions in the area of extracellular matrix sensing by cells, cell-cell adhesion and cell migration. The use, the availability, the impact and the challenges of such approaches in the field of biology are discussed.

Graphene-Templated Supported Lipid Bilayer Nanochannels

The use of patterned substrates to impose geometrical restriction on the lateral mobility of molecules in supported lipid membranes has found widespread utility in studies of cell membranes. Here, we template-pattern supported lipid membranes with nanopatterned graphene. We utilize focused ion beam milling to pattern graphene on its growth substrate, then transfer the patterned graphene to fresh glass substrates for subsequent supported membrane formation. We observe that graphene functions as an excellent lateral diffusion barrier for supported lipid bilayers. Additionally, the observed diffusion dynamics of lipids in nanoscale graphene channels reveal extremely low boundary effects, a common problem with other materials. We suggest this is attributable to the ultimate thinness of graphene.

Preparation of Reactive Oligo(p-Phenylene Vinylene) Materials for Spatial Profiling of the Chemical Reactivity of Intracellular Compartments

An oligo(p-phenylene vinylene) derivative (OPV-pfp) functionalized with pentafluorophenol active ester is designed and synthesized. The high reactivity of OPV-pfp with biological small molecules or macromolecules containing amino groups under physiological conditions leads to spectral changes of OPV-pfp; thus, spatial reactivity discrimination for different subcellular structures inside cells is realized by triggering and imaging the fluorescence signal change of the OPV-pfp.

Interactions and Translational Dynamics of Phosphatidylinositol Bisphosphate (PIP2) Lipids in Asymmetric Lipid Bilayers

Phosphatidylinositol phosphate (PIP) lipids are critical to many cell signaling pathways, in part by acting as molecular beacons that recruit peripheral membrane proteins to specific locations within the plasma membrane. Understanding the biophysics of PIP-protein interactions is critical to developing a chemically detailed model of cell communication. Resolving such interactions is challenging, even in model membrane systems, because of the difficulty in preparing PIP-containing membranes with high fluidity and integrity. Here we report on a simple, vesicle-based protocol for preparing asymmetric supported lipid bilayers in which fluorescent PIP lipid analogues are found only on the top leaflet of the supported membrane facing the bulk solution. With this asymmetric distribution of lipids between the leaflets, the fluorescent signal from the PIP lipid analogue reports directly on interactions between the peripheral molecules and the top leaflet of the membrane. Asymmetric PIP-containing bilayers are an ideal platform to investigate the interaction of PIP with peripheral membrane proteins using fluorescence-based imaging approaches. We demonstrate their usefulness here with a combined fluorescence correlation spectroscopy and single particle tracking study of the interaction between PIP2 lipids and a polycationic polymer, quaternized polyvinylpyridine (QPVP). With this approach we are able to quantify the microscopic features of the mobility coupling between PIP2 lipids and polybasic QPVP. With single particle tracking we observe individual PIP2 lipids switch from Brownian to intermittent motion as they become transiently trapped by QPVP.

Covalent Ras Dimerization on Membrane Surfaces through Photosensitized Oxidation

Ras, a small GTPase found primarily on the inner leaflet of the plasma membrane, is an important signaling node and an attractive target for anticancer therapies. Lateral organization of Ras on cellular membranes has long been a subject of intense research; in particular, whether it forms dimers on membranes as part of its regulatory function has been a point of great interest. Here we report Ras dimer formation on membranes by Type II photosensitization reactions, in which molecular oxygen mediates the radicalization of proteins under typical fluorescence experimental conditions. The presence of Ras dimers on membranes was detected by diffusion-based fluorescence techniques including fluorescence correlation spectroscopy and single particle tracking, and molecular weights of the stable covalently coupled species were confirmed by gel electrophoresis. Fluorescence spectroscopy implicates interprotein dityrosine as one of the dimerization motifs. The specific surface tyrosine distribution on Ras renders the protein especially sensitive to this reaction, and point mutations affecting surface tyrosines are observed to alter dimerization potential. The photosensitization reactions are reflective of physiological oxidative stress induced by reactive oxygen species, suggesting such processes may occur naturally and influence signaling pathways in cells.

Supported Lipid Bilayers for the Generation of Dynamic Cell-Material Interfaces

Supported lipid bilayers (SLB) offer unique possibilities for studying cellular membranes and have been used as a synthetic architecture to interact with cells. Here, the state-of-the-art in SLB-based technology is presented. The fabrication, analysis, characteristics and modification of SLBs are described in great detail. Numerous strategies to form SLBs on different substrates, and the means to patteren them, are described. The use of SLBs as model membranes for the study of membrane organization and membrane processes in vitro is highlighted. In addition, the use of SLBs as a substratum for cell analysis is presented, with discrimination between cell-cell and cell-extracellular matrix (ECM) mimicry. The study is concluded with a discussion of the potential for in vivo applications of SLBs.

One-Photon Lithography for High-Quality Lipid Bilayer Micropatterns

A relevant question in cell biology with broad implications in biomedicine is how the organization and dynamics of interacting membranes modulate signaling cascades that involve cell-cell contact. The functionalization of surfaces with supported lipid bilayers containing tethered proteins is a particularly useful method to present ligands with membrane-like mobility to cells. Here, we present a method to generate micrometer-sized patches of lipid bilayers decorated with proteins. The method uses an economic microcontact printing technique based on one-photon lithography that can be easily implemented in a commercial laser scanning microscope. We verified that both proteins and lipids freely diffuse within the patterned bilayer, as assessed by z-scan fluorescence correlation spectroscopy and fluorescence recovery after photobleaching. These results suggest that the supported lipid bilayer patterns constitute an optimal system to explore processes involving direct interactions between cells. We also illustrate possible applications of this method by exploring the interaction of cells expressing the Fas receptor and patterns of lipid bilayers containing an agonist antibody against Fas.

Membrane adhesion and the formation of heterogeneities: biology, biophysics, and biotechnology

Membrane adhesion is essential to many vital biological processes. Sites of membrane adhesion are often associated with heterogeneities in the lipid and protein composition of the membrane. These heterogeneities are thought to play functional roles by facilitating interactions between proteins. However, the causal links between membrane adhesion and membrane heterogeneities are not known. Here we survey the state of the field and indicate what we think are understudied areas ripe for development.

Exploiting lipopolysaccharide-induced deformation of lipid bilayers to modify membrane composition and generate two-dimensional geometric membrane array patterns

Supported lipid bilayers have proven effective as model membranes for investigating biophysical processes and in development of sensor and array technologies. The ability to modify lipid bilayers after their formation and in situ could greatly advance membrane technologies, but is difficult via current state-of-the-art technologies. Here we demonstrate a novel method that allows the controlled post-formation processing and modification of complex supported lipid bilayer arrangements, under aqueous conditions. We exploit the destabilization effect of lipopolysaccharide, an amphiphilic biomolecule, interacting with lipid bilayers to generate voids that can be backfilled to introduce desired membrane components. We further demonstrate that when used in combination with a single, traditional soft lithography process, it is possible to generate hierarchically-organized membrane domains and microscale 2-D array patterns of domains. Significantly, this technique can be used to repeatedly modify membranes allowing iterative control over membrane composition. This approach expands our toolkit for functional membrane design, with potential applications for enhanced materials templating, biosensing and investigating lipid-membrane processes.

Centimeter-scale subwavelength photolithography using metal-coated elastomeric photomasks with modulated light intensity at the oblique sidewalls

By coating polydimethylsiloxane (PDMS) relief structures with a layer of opaque metal such as gold, the incident light is strictly allowed to pass through the nanoscopic apertures at the sidewalls of PDMS reliefs to expose underlying photoresist at nanoscale regions, thus producing subwavelength nanopatterns covering centimeter-scale areas. It was found that the sidewalls were a little oblique, which was the key to form the nanoscale apertures. Two-sided and one-sided subwavelength apertures can be constructed by employing vertical and oblique metal evaporation directions, respectively. Consequently, two-line and one-line subwavelength nanopatterns with programmable feature shapes, sizes, and periodicities could be produced using the obtained photomasks. The smallest aperture size and line width of 80 nm were achieved. In contrast to the generation of raised positive photoresist nanopatterns in phase shifting photolithography, the recessed positive photoresist nanopatterns produced in this study provide a convenient route to transfer the resist nanopatterns to metal nanopatterns. This nanolithography methodology possesses the distinctive advantages of simplicity, low cost, high throughput, and nanoscale feature size and shape controllability, making it a potent nanofabrication technique to enable functional nanostructures for various potential applications.

Parallel near-field photolithography with metal-coated elastomeric masks

Developing a cost-effective nanolithography strategy that enables the production of subwavelength features with various shapes over large areas is a long-standing goal in the nanotechnology community. Herein, an inexpensive nanolithographic technique that combines the wafer-scale production capability of photolithography with the subwavelength feature size controllability of near-field photolithography was developed to fabricate centimeter-scale up to wafer-scale sub-100-nm variously shaped nanopatterns on surfaces. The wafer-scale elastomeric trench-based photomasks with subwavelength apertures created at the apexes were compatible with mask aligners, allowing for the production of wafer-scale subwavelength nanopatterns with adjustable feature sizes, shapes, and periodicities. The smallest feature sizes of 50 and 80 nm were achieved on positive tone and negative tone photoresist surfaces, respectively, which could be ascribed to a near-field optical effect. The fabricated centimeter-scale nanopatterns were functionalized to study cell-matrix adhesion and migration. Compared to currently developed nanolithographic methods that approach similar functionalities, this facile nanolithographic strategy combines the merits of low cost, subwavelength feature size, high throughput, and varied feature shapes, making it an affordable approach to be used in academic research for researchers at most institutions.

Photoactivated bioconjugation between ortho-azidophenols and anilines: a facile approach to biomolecular photopatterning

Methods for the surface patterning of small molecules and biomolecules can yield useful platforms for drug screening, synthetic biology applications, diagnostics, and the immobilization of live cells. However, new techniques are needed to achieve the ease, feature sizes, reliability, and patterning speed necessary for widespread adoption. Herein, we report an easily accessible and operationally simple photoinitiated reaction that can achieve patterned bioconjugation in a highly chemoselective manner. The reaction involves the photolysis of 2-azidophenols to generate iminoquinone intermediates that couple rapidly to aniline groups. We demonstrate the broad functional group compatibility of this reaction for the modification of proteins, polymers, oligonucleotides, peptides, and small molecules. As a specific application, the reaction was adapted for the photolithographic patterning of azidophenol DNA on aniline glass substrates. The presence of the DNA was confirmed by the ability of the surface to capture living cells bearing the sequence complement on their cell walls or cytoplasmic membranes. Compared to other light-based DNA patterning methods, this reaction offers higher speed and does not require the use of a photoresist or other blocking material.

Locked-in biomimetic surface gradients that are tunable in size, density and functionalization

Tuneable and stable surface-chemical gradients in supported lipid bilayers (SLBs) hold great promise for a range of applications in biological sensing and screening. Yet, until now, no method has been reported that provides temporal control of SLB gradients. Herein we report on the development of locked-in SLB gradients that can be tuned in space, time and density by applying a process to control lipid phase behaviour, electric field and temperature. Stable gradients of charged Texas-Red-, serine- or biotin-terminated lipids have been prepared. For example, the Texas-Red surface density was varied from 0 to 2 mol %, while the length was varied between several tens to several hundreds of microns. At room temperature the gradients are shown to be stable up to 24 h, while at 60 °C the gradients could be erased in 30 min. Covalent and non-covalent chemical modification of the gradients is demonstrated, for example, by FITC, hexahistidine-tagged proteins, and SAv/biotin. The amenability to various (bio)chemistries paves the way for novel SLB-based gradients, useful in sensing, high-throughput screening and for understanding dynamic biological processes.

Tethered bilayer lipid membranes (tBLMs): interest and applications for biological membrane investigations

Biological membranes play a central role in the biology of the cell. They are not only the hydrophobic barrier allowing separation between two water soluble compartments but also a supra-molecular entity that has vital structural functions. Notably, they are involved in many exchange processes between the outside and inside cellular spaces. Accounting for the complexity of cell membranes, reliable models are needed to acquire current knowledge of the molecular processes occurring in membranes. To simplify the investigation of lipid/protein interactions, the use of biomimetic membranes is an approach that allows manipulation of the lipid composition of specific domains and/or the protein composition, and the evaluation of the reciprocal effects. Since the middle of the 80's, lipid bilayer membranes have been constantly developed as models of biological membranes with the ultimate goal to reincorporate membrane proteins for their functional investigation. In this review, after a brief description of the planar lipid bilayers as biomimetic membrane models, we will focus on the construction of the tethered Bilayer Lipid Membranes, the most promising model for efficient membrane protein reconstitution and investigation of molecular processes occurring in cell membranes.

Engineering of synthetic cellular microenvironments: implications for immunity

In this article, we discuss novel synthetic approaches for studying the interactions of cells with their microenvironment. Notably, critical cellular processes such as growth, differentiation, migration, and fate determination, are tightly regulated by interactions with neighboring cells, and the surrounding extracellular matrix. Given the huge complexity of natural cellular environments, and their rich molecular and physical diversity, the mission of understanding "environmental signaling" at a molecular-mechanistic level appears to be extremely challenging. To meet these challenges, attempts have been made in recent years to design synthetic matrices with defined chemical and physical properties, which, artificial though they may be, could reveal basic "design principles" underlying the physiological processes. Here, we summarize recent developments in the characterization of the chemical and physical properties of cell sensing and adhesion, as well as the design and use of engineered, micro- to nanoscale patterned and confined environments, for systematic, comprehensive modulation of the cells' environment. The power of these biomimetic surfaces to highlight environmental signaling events in cells, and in immune cells in particular, will be discussed.

Molecularly engineered surfaces for cell biology: from static to dynamic surfaces

Surfaces with a well-defined presentation of ligands for receptors on the cell membrane can serve as models of the extracellular matrix for studying cell adhesion or as model cell surfaces for exploring cell-cell contacts. Because such surfaces can provide exquisite control over, for example, the density of these ligands or when the ligands are presented to the cell, they provide a very precise strategy for understanding the mechanisms by which cells respond to external adhesive cues. In the present feature article, we present an overview of the basic biology of cell adhesion before discussing surfaces that have a static presentation of immobile ligands. We outline the biological information that such surfaces have given us, before progressing to recently developed switchable surfaces and surfaces that mimic the lipid bilayer, having adhesive ligands that can move around the membrane and be remodeled by the cell. Finally, the feature article closes with some of the biological information that these new types of surfaces could provide.

About supramolecular systems for dynamically probing cells

This article reviews the state of the art in the development of strategies for generating supramolecular systems for dynamic cell studies. Dynamic systems are crucial to further our understanding of cell biology and are consequently at the heart of many medical applications. Increasing interest has therefore been focused recently on rendering systems bioactive and dynamic that can subsequently be employed to engage with cells. Different approaches using supramolecular chemistry are reviewed with particular emphasis on their application in cell studies. We conclude with an outlook on future challenges for dynamic cell research and applications.

Preparation of tethered-lipid bilayers on gold surfaces for the incorporation of integral membrane proteins synthesized by cell-free expression

There is an increasing interest to express and study membrane proteins in vitro. New techniques to produce and insert functional membrane proteins into planar lipid bilayers have to be developed. In this work, we produce a tethered lipid bilayer membrane (tBLM) to provide sufficient space for the incorporation of the integral membrane protein (IMP) Aquaporin Z (AqpZ) between the tBLM and the surface of the sensor. We use a gold (Au)-coated sensor surface compatible with mechanical sensing using a quartz crystal microbalance with dissipation monitoring (QCM-D) or optical sensing using the surface plasmon resonance (SPR) method. tBLM is produced by vesicle fusion onto a thin gold film, using phospholipid-polyethylene glycol (PEG) as a spacer. Lipid vesicles are composed of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) and 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-poly(ethyleneglycol)-2000-N-[3-(2-pyridyldithio)propionate], so-called DSPE-PEG-PDP, at different molar ratios (respectively, 99.5/0.5, 97.5/2.5, and 95/5 mol %), and tBLM formation is characterized using QCM-D, SPR, and atomic force technology (AFM). We demonstrate that tBLM can be produced on the gold surface after rupture of the vesicles using an α helical (AH) peptide, derived from hepatitis C virus NS5A protein, to assist the fusion process. A cell-free expression system producing the E. coli integral membrane protein Aquaporin Z (AqpZ) is directly incubated onto the tBLMs for expression and insertion of the IMP at the upper side of tBLMs. The incorporation of AqpZ into bilayers is monitored by QCM-D and compared to a control experiment (without plasmid in the cell-free expression system). We demonstrate that an IMP such as AqpZ, produced by a cell-free expression system without any protein purification, can be incorporated into an engineered tBLM preassembled at the surface of a gold-coated sensor.

Integrin-matrix clusters form podosome-like adhesions in the absence of traction forces

Matrix-activated integrins can form different adhesion structures. We report that nontransformed fibroblasts develop podosome-like adhesions when spread on fluid Arg-Gly-Asp peptide (RGD)-lipid surfaces, whereas they habitually form focal adhesions on rigid RGD glass surfaces. Similar to classic macrophage podosomes, the podosome-like adhesions are protrusive and characterized by doughnut-shaped RGD rings that surround characteristic core components including F-actin, N-WASP, and Arp2/Arp3. Furthermore, there are 18 podosome markers in these adhesions, though they lack matrix metalloproteinases that characterize invadopodia and podosomes of Src-transformed cells. When nontransformed cells develop force on integrin-RGD clusters by pulling RGD lipids to prefabricated rigid barriers (metal lines spaced by 1–2 μm), these podosomes fail to form and instead form focal adhesions. The formation of podosomes on fluid surfaces is mediated by local activation of phosphoinositide 3-kinase (PI3K) and the production of phosphatidylinositol-(3,4,5)-triphosphate (PIP3) in a FAK/PYK2-dependent manner. Enrichment of PIP3 precedes N-WASP activation and the recruitment of RhoA-GAP ARAP3. We propose that adhesion structures can be modulated by traction force development and that production of PIP3 stimulates podosome formation and subsequent RhoA downregulation in the absence of traction force.

•

Nontransformed fibroblasts on RGD membranes form podosome-like protrusions

•

Nanopatterned RGD membranes enable traction force, suppressing protrusion formation

•

Local activation of PI3K transforms prepodosomal-like RGD clusters

•

PIP3-bound RhoA GAP ARAP3 is recruited at the protrusion and downregulates RhoA-GTP

Diffusion and interaction dynamics of individual membrane protein complexes confined in micropatterned polymer-supported membranes

Micropatterned polymer-supported membranes (PSM) are established as a tool for confining the diffusion of transmembrane proteins for single molecule studies. To this end, a photochemical surface modification with hydrophobic tethers on a PEG polymer brush is implemented for capturing of lipid vesicles and subsequent fusion. Formation of contiguous membranes within micropatterns is confirmed by scanning force microscopy, fluorescence recovery after photobleaching (FRAP), and super-resolved single-molecule tracking and localization microscopy. Free diffusion of transmembrane proteins reconstituted into micropatterned PSM is demonstrated by FRAP and by single-molecule tracking. By exploiting the confinement of diffusion within micropatterned PSM, the diffusion and interaction dynamics of individual transmembrane receptors are quantitatively resolved.

Tether-supported biomembranes with α-helical peptide-based anchoring constructs

The strict requirement of constructing a native lipid environment to preserve the structure and functionality of membrane proteins is the starting constraint when building biomaterials and sensor systems from these biomolecules. To enhance the viability of supported biomembranes systems and build new ligand display interfaces, we apply rationally designed peptides partitioned into the lipid bilayer interface. Peptides designed to form membrane-spanning α-helical anchoring domains are synthesized using solid-phase peptide synthesis. K(3)A(4)L(2)A(7)L(2)A(3)K(2)-FITC is synthesized on the 100 mg scale for use as a biomembrane anchoring molecule, where orthogonal side-chain modifications allow us to introduce probes enabling peptide localization within supported bilayers. The peptides are found to form α-helical domains within liposomes as assessed with circular dichroism spectroscopy. These peptides are designed to be incorporated into lipid bilayers supported by microspheres and serve as biomembrane anchoring moieties to amino-terminated surfaces. Here, the silica bead surface (4.7 μm diameter) is activated with homobifunctional NHS-PEG(3000)-NHS as "polymer cushion" spacers. This tethering to a subset of the K(3)A(4)L(2)A(7)L(2)A(3)K(2)-FITC molecules present in the bilayer is achieved by the fusion of liposomes followed by coupling of the peptide amino groups to the NHS presented from the silica microsphere surfaces. The biomembrane distributions of tethered and untethered K(3)A(4)L(2)A(7)L(2)A(3)K(2)-FITC are probed with confocal microscopy and are found to give 3D reconstructions consistent with largely homogeneous supported biomembranes. The fluidity of the untethered fraction of peptides within supported membranes is quantified using the fluorescence recovery after photobleaching (FRAP) technique. The presence of the PEG(3000) polymer cushion facilitated a 28.9% increase in peptide diffusivity over untethered bilayers at the lowest peptide to lipid ratio we examined. We show that rationally designed peptide-based anchors can be used to tether lipid bilayers, creating a polymer-cushioned lipid microenvironment on surfaces with high lateral mobility and facilitating the development of a new platform for ligand displays.

Functional single-cell analysis of T-cell activation by supported lipid bilayer-tethered ligands on arrays of nanowells

Supported lipid bilayers are an important biomolecular tool for characterizing immunological synapses. Immobilized bilayers presenting tethered ligands on planar substrates have yielded both spatio-temporal and structural insights into how T cell receptors (TCRs) reorganize during the initial formation of synapses upon recognition of peptide antigens bound to major histocompatibility complex (MHC) molecules. The prototypical configuration of these assays, however, limits the extent to which the kinetics and structure of the supramolecular activation clusters of the synapse (that occur in seconds or minutes) can be related to subsequent complex cellular responses, such as cytokine secretion and proliferation, occurring over hours to days. Here we describe a new method that allows correlative measures of both attributes with single-cell resolution by using immobilized lipid bilayers and tethered ligands on the surface of dense arrays of subnanoliter wells. This modification allows each nanowell to function as an artificial antigen-presenting cell (APC), and the synapses formed upon contact can be imaged by fluorescence microscopy. We show that the lipid bilayers remain stable and mobile on the surface of the PDMS, and that modifying the ligands tethered to the bilayer alters the structure of the resulting synapses in expected ways. Finally, we demonstrate that this approach allows the subsequent characterization of secreted cytokines from the activated human T cell clones by microengraving in both antigen- and pan-specific manners. This new technique should allow detailed investigations on how biophysical and structural aspects of the synapse influence the activation of individual T cells and their complex functional responses.

Micro- and nanoscale engineering of cell signaling

It is increasingly recognized that cell signaling, as a chemical process, must be considered at the local, micrometer scale. Micro- and nanofabrication techniques provide access to these dimensions, with the potential to capture and manipulate the spatial complexity of intracellular signaling in experimental models. This review focuses on recent advances in adapting surface engineering for use with biomolecular systems that interface with cell signaling, particularly with respect to surfaces that interact with multiple receptor systems on individual cells. The utility of this conceptual and experimental approach is demonstrated in the context of epithelial cells and T lymphocytes, two systems whose ability to perform their physiological function is dramatically impacted by the convergence and balance of multiple signaling pathways.

"Cell biology meets physiology: functional organization of vertebrate plasma membranes"--the immunological synapse

The immunological synapse (IS) is an excellent example of cell-cell communication, where signals are exchanged between two cells, resulting in a well-structured line of defense during adaptive immune response. This process has been the focus of several studies that aimed at understanding its formation and subsequent events and has led to the realization that it relies on a well-orchestrated molecular program that only occurs when specific requirements are met. The development of more precise and controllable T cell activation systems has led to new insights including the role of mechanotransduction in the process of formation of the IS and T cell activation. Continuous advances in our understanding of the IS formation, particularly in the context of T cell activation and differentiation, as well the development of new T cell activation systems are being applied to the establishment and improvement of immune therapeutical approaches.

Investigative and clinical applications of synthetic immune synapses

The immune synapse (IS) has emerged as a compelling model of cell-cell communication. This interface between a T cell and antigen-presenting cell (APC) serves as a key point in coordinating the immune response. A distinguishing feature of this interface is that juxtacrine signaling molecules form complex patterns that are defined at micrometer and submicrometer scales. Moreover, these patterns are highly dynamic. While cellular and molecular approaches have provided insight into the influence of these patterns on cell-cell signaling, replacing the APC with a synthetic, micro/nanoengineered surface promises a new level of sophistication to these studies. Micropatterning of multiple ligands onto a surface, for example, allowed the direct demonstration that T cells can sense and respond to microscale geometry of the IS. Supported lipid bilayers have captured the lateral mobility of natural ligands, allowing insight into this complex property of the cell-cell interface in model systems. Finally, engineered surfaces have allowed the study of forces and mechanosensing in T cell activation, an emerging area of immune cell research. In addition to providing new insight into biophysical principles, investigations into IS function may allow control over ex vivo T cell expansion. Bioreactors based on these concepts may find immediate application in enhancing cellular-based immunotherapy.

Spatial-temporal reorganization of activated integrins

Integrin receptors play important roles in cell adhesion and tumor metastasis. The coupling of mechanical sensing and biochemical ligation is known to collectively regulate the activation of integrin receptors. Recently, oligomerization of activated integrins has been considered as the primordial signature of cytoskeletal remodeling and the initiation of various downstream signals, such as focal and fibrillar adhesions. However, spatio-temporal reorganization of activated integrins and associated proteins remains poorly understood. Here, we summarized the recent discovery of sequential biophysical events of integrin activation during early adhesion formation. Using the cyclic Arg-Gly-Asp (RGD) peptide as a mobile ligand on supported lipid membranes, a series of previously unreported events were observed following integrin αvβ3 clustering and cell spreading, including a long-range lateral translocation of the integrin clusters. With initial clustering, localized actin polymerization occurred in a Src family kinase dependent manner. Clustering of liganded integrins recruits various adaptor proteins and serves as a reaction core for mechanobiological activities. In addition, there are future possibilities to investigate the role of other synergetic interactions with the activated integrin receptors.

Miniaturised technologies for the development of artificial lipid bilayer systems

Artificially reproducing cellular environments is a key aim of synthetic biology, which has the potential to greatly enhance our understanding of cellular mechanisms. Microfluidic and lab-on-a-chip (LOC) techniques, which enable the controlled handling of sub-microlitre volumes of fluids in an automated and high-throughput manner, can play a major role in achieving this by offering alternative and powerful methodologies in an on-chip format. Such techniques have been successfully employed over the last twenty years to provide innovative solutions for chemical analysis and cell-, molecular- and synthetic- biology. In the context of the latter, the formation of artificial cell membranes (or artificial lipid bilayers) that incorporate membrane proteins within miniaturised LOC architectures offers huge potential for the development of highly sensitive molecular sensors and drug screening applications. The aim of this review is to give a comprehensive and critical overview of the field of microsystems for creating and exploiting artificial lipid bilayers. Advantages and limitations of three of the most popular approaches, namely suspended, supported and droplet-based lipid bilayers, are discussed. Examples are reported that show how artificial cell membrane microsystems, by combining together biological procedures and engineering techniques, can provide novel methodologies for basic biological and biophysical research and for the development of biotechnology tools.

Correlating anomalous diffusion with lipid bilayer membrane structure using single molecule tracking and atomic force microscopy

Anomalous diffusion has been observed abundantly in the plasma membrane of biological cells, but the underlying mechanisms are still unclear. In general, it has not been possible to directly image the obstacles to diffusion in membranes, which are thought to be skeleton bound proteins, protein aggregates, and lipid domains, so the dynamics of diffusing particles is used to deduce the obstacle characteristics. We present a supported lipid bilayer system in which we characterized the anomalous diffusion of lipid molecules using single molecule tracking, while at the same time imaging the obstacles to diffusion with atomic force microscopy. To explain our experimental results, we performed lattice Monte Carlo simulations of tracer diffusion in the presence of the experimentally determined obstacle configurations. We correlate the observed anomalous diffusion with obstacle area fraction, fractal dimension, and correlation length. To accurately measure an anomalous diffusion exponent, we derived an expression to account for the time-averaging inherent to all single molecule tracking experiments. We show that the length of the single molecule trajectories is critical to the determination of the anomalous diffusion exponent. We further discuss our results in the context of confinement models and the generating stochastic process.

Early integrin binding to Arg-Gly-Asp peptide activates actin polymerization and contractile movement that stimulates outward translocation

Integrin-mediated adhesions are critical for stem cell differentiation, cancer metastasis, and the immune response [Hynes RO (2009) Science 326:1216-1219]. However, the mechanisms of early adhesion formation remain unclear, especially the effects of lateral clustering of integrins and the role of the Src family kinases. Using mobile Arg-Gly-Asp (RGD) peptide ligands on lipid bilayers with nano-fabricated physical barriers [Salaita K, et al. (2010) Science 327:1380-1385], we observe surprising long-range lateral movements of ligated integrins during the process of cell spreading. Initially, RGD-activated integrin clusters stimulate actin polymerization that radiates from the clusters. Myosin II contraction of actin from adjacent clusters produces contractile pairs that move toward each other against barriers. Force generated by myosin II stimulates a Src kinase-dependent lamellipodial extension and outward movement of clusters. Subsequent retraction by myosin II causes inward movement of clusters. The final cell spread area increases with the density of periodic barriers. Early integrin clustering recruits adhesion proteins, talin, paxillin, and FAK, irrespective of force generation. However, recruitment of vinculin is only observed upon contraction. Thus, we suggest that integrin activation and early clustering are independent of lateral forces. Clustering activates Src-dependent actin polymerization from clusters. Myosin contraction of clusters to lines stimulates active spreading with outward forces from actin polymerization followed by a second wave of contraction. Many of these early mechanical steps are not evident in cells spreading on immobilized matrices perhaps because of the low forces involved. These observations can provide new targets to control integrin-dependent adhesion and motility.