A perspective: engineering periosteum for structural bone graft healing

Synergistic effect of ultrasound and reinforced electrical environment by bioinspired periosteum for enhanced osteogenesis via immunomodulation of macrophage polarization through Piezo1

The periosteum plays a vital role in repairing bone defects. Researchers have demonstrated the existence of electrical potential in the periosteum and native bone, indicating that electrical signals are essential for functional bone regeneration. However, the clinical use of external electrical treatments has been limited due to their inconvenience and inefficacy. As an alternative, low-intensity pulsed ultrasound (LIPUS) is a noninvasive form of physical therapy that enhances bone regeneration. Furthermore, the wireless activation of piezoelectric biomaterials through ultrasound stimulation would generate electric charges precisely at the defect area, compensating for the insufficiency of external electrical stimulation and potentially promoting bone regeneration through the synergistic effect of mechanical and electrical stimulation. However, the optimal integration of LIPUS with an appropriate piezoelectric periosteum is yet to be explored. Herein, the BaTiO3/multiwalled-carbon nanotubes/collagen (BMC) membranes have been fabricated, possessing physicochemical properties including improved surface hydrophilicity, enhanced mechanical performance, ideal piezoelectricity, and outstanding biocompatibility, all of which are conducive to bone regeneration. When combined with LIPUS, the endogenous electrical microenvironment of native bone was recreated. After that, the wireless-generated electrical signals, along with the mechanical signals induced by LIPUS, were transferred to macrophages and activated Ca2+ influx through Piezo1. Ultimately, the regenerative effect of the BMC membrane with LIPUS stimulation (BMC + L) was confirmed in a mouse cranial defect model. Together, this research presents a co-engineering strategy that involves fabricating a novel biomimetic periosteum and utilizing the synergistic effect of ultrasound to enhance bone regeneration, which is achieved through the reinforcement of the electrical environment and the immunomodulation of macrophage polarization.

Early Implant Placement with Immediate Loading in the Mandibular Anterior Region: A Rapid Solution to Edentulism

The aim of this article is to present the case of an early implant placement with immediate loading in the mandibular anterior region as a rapid solution to edentulism. A 40-year-old healthy male patient reported with a chief complaint of loosening of tooth in the lower front region of the jaw. On intraoral examination, there was a mobile tooth with respect to 41. The mobile tooth was extracted, and early implant placement was done along with Bio-Oss bone grafts to fill the jumping distance with no barrier membrane. Immediate provisionalisation was done on early-placed dental implants. After 5 months of the healing period, the final implant-level impressions were made, and the provisional crown was replaced with the final zirconia crown. This case report demonstrates satisfactory esthetic and functional outcomes along with various other advantages.

Dendronized chitosan hydrogel with GIT1 to accelerate bone defect repair through increasing local neovascular amount

Bone defects have long been a major healthcare issue because of the difficulties in regenerating bone mass volume and the high cost of treatment. G protein-coupled receptor kinase 2 interacting protein 1 (GIT1) has been proven to play an important role both in vascular development and in bone fracture healing. In this study, a type of thermoresponsive injectable hydrogel from oligoethylene glycol-based dendronized chitosan (G1-CS) was loaded with GIT1-plasmids (G1-CS/GIT1), and used to fill unicortical bone defects. RT-PCR analysis confirmed that G1-CS/GIT1 enhanced DNA transfection in MSCs both in vitro and in vivo. From the results of micro-CT, RT-PCR and histological analysis, it can be concluded that G1-CS/GIT1 accelerated the bone healing rate and increased the amount of neovascularization around the bone defects. In addition, an adeno-associated virus (AAV)-GIT1 was constructed to transfect mesenchymal stem cells. The results of capillary tube formation assay, immunofluorescence staining and western blot analysis proved that high expression of GIT1 induces mesenchymal stem cells to differentiate into endothelial cells. RT-PCR analysis and capillary tube formation assay confirmed that the Notch signaling pathway was activated in the differentiation process. Overall, we developed an efficient strategy through combination of injectable hydrogel and G1T1 for bone tissue engineering.

Overview of Periosteal Reaction by Imaging

The periosteum is a membrane that covers almost all bones in the body. It is a living structure but attracts little attention unless it reacts excessively. We highlight the important points in the anatomy, histology, and physiology of the periosteum, the stimuli and various aspects of periosteal reaction, and the main conditions underlying periosteal reaction.

Elastin-like recombinamer-mediated hierarchical mineralization coatings on Zr-16Nb-xTi (x = 4,16 wt%) alloy surfaces improve biocompatibility

The biocompatibility of biomedical materials is vital to their applicability and functionality. However, modifying surfaces for enhanced biocompatibility using traditional surface treatment techniques is challenging. We employed a mineralizing elastin-like recombinamer (ELR) self-assembling platform to mediate mineralization on Zr-16Nb-xTi (x = 4,16 wt%) alloy surfaces, resulting in the modification of surface morphology and bioactivity while improving the biocompatibility of the material. We modulated the level of nanocrystal organization by adjusting the cross-linker ratio. Nanoindentation tests revealed that the mineralized configuration had nonuniformity with respect to Young's modulus and hardness, with the center areas having higher values (5.626 ± 0.109 GPa and 0.264 ± 0.022 GPa) compared to the edges (4.282 ± 0.327 GPa and 0.143 ± 0.023 GPa). The Scratch test results indicated high bonding strength (2.668 ± 0.117 N) between the mineralized coating and the substrate. Mineralized Zr-16Nb-xTi (x = 4,16 wt%) alloys had higher viability compared to untreated alloys, which exhibited high cell viability (>100 %) after 5 days and high alkaline phosphatase activity after 7 days. Cell proliferation assays indicated that MG 63 cells grew faster on mineralized surfaces than on untreated surfaces. Scanning electron microscopy imaging confirmed that the cells adhered and spread well on mineralized surfaces. Furthermore, hemocompatibility test results revealed that all mineralized samples were non-hemolytic. Our results demonstrate the viability of employing the ELR mineralizing platform to improve alloy biocompatibility.

Individual "alveolar phenotype" limits dimensions of lateral bone augmentation

AIM

Alveolar ridge resorption following tooth extraction often renders a lateral bone augmentation inevitable. Some patients, however, suffer from severe early (during graft healing, E_res ) and/or late (during follow-up, L_res ) graft resorption. We explored the hypothesis that the "individual phenotypic dimensions" may partially explain the degree of such resorptions.

MATERIALS AND METHODS

Patients who underwent a guided bone regeneration (GBR) procedure were screened for inclusion according to the following criteria: (1) a relatively symmetrical maxillary arch; (2) an intact contra-lateral alveolar bone dimension; (3) the availability of a pre-operative cone-beam CT (CBCT); (4) a CBCT taken immediately after GBR, and (5) at least one CBCT scan ≥6 months after surgery. CBCT scans from different timepoints were registered and imported into the Mimics software (Materialise, Leuven, Belgium). Bone dimensions of the contra-lateral site of the augmentation, representing the "individual phenotypical dimension (IPD) of the alveolar crest", were superimposed on the augmented site and registered accordingly. As such, E_res and L_res could be measured over time, in relation to the IPD (in two dimensions; per millimetre apically from the alveolar crest, in the centre of the GBR), as well as in three dimensions (the entire GBR, 2 mm away from the mesial, distal, and apical border for standardization).

RESULTS

A total of 17 patients (23 augmented sites) were included. After E_res , the outline of the augmentation was in general located ±1 mm outside the IPD, but ≥1.5 years after GBR, it further moved towards the IPD (85% within 0.5 mm distance).

CONCLUSIONS

Within the limitations of this study, the results indicate that the dimensions of a lateral bone augmentation are defined by the "individual phenotypic bone boundaries" of the patient.

Three-dimensional bioprinted BMSCs-laden highly adhesive artificial periosteum containing gelatin-dopamine and graphene oxide nanosheets promoting bone defect repair

The periosteum is a connective tissue membrane adhering to the surface of bone tissue that primarily provides nutrients and regulates osteogenesis during bone development and injury healing. However, building an artificial periosteum with good adhesion properties and satisfactory osteogenesis for bone defect repair remains a challenge, especially using three-dimensional (3D) bioprinting. In this study, dopamine was first grafted onto the molecular chain of gelatin usingN-(3-dimethylaminopropyl)-N'-ethylcarbodiimide hydrochloride andN-hydroxysuccinimide (NHS) to activate the carboxyl group and produce modified gelatin-dopamine (GelDA). Next, a methacrylated gelatin, methacrylated silk fibroin, GelDA, and graphene oxide nanosheet composite bioink loaded with bone marrow mesenchymal stem cells was prepared and used for bioprinting. The physicochemical properties, biocompatibility, and osteogenic roles of the bioink and 3D bioprinted artificial periosteum were then systematically evaluated. The results showed that the developed bioink showed good thermosensitivity and printability and could be used to build 3D bioprinted artificial periosteum with satisfactory cell viability and high adhesion. Finally, the 3D bioprinted artificial periosteum could effectively enhance osteogenesis bothin vitroandin vivo. Thus, the developed 3D bioprinted artificial periosteum can prompt new bone formation and provides a promising strategy for bone defect repair.

Current strategies in biomaterial-based periosteum scaffolds to promote bone regeneration: A review

The role of periosteum rich in a variety of bone cells and growth factors in the treatment of bone defects has gradually been discovered. However, due to the limited number of healthy transplantable periosteum, there are still major challenges in the clinical treatment of critical-size bone defects. Various techniques for preparing biomimetic periosteal scaffolds that are similar in composition and structure to natural periosteal scaffold have gradually emerged. This article reviews the current preparation methods of biomimetic periosteal scaffolds based on various biomaterials, which are mainly divided into natural periosteal materials and various polymer biomaterials. Several preparation methods of biomimetic periosteal scaffolds with different principles are listed, their strengths and weaknesses are also discussed. It aims to provide a more systematic perspective for the preparation of biomimetic periosteal scaffolds in the future.

Amniotic membrane as an accelator in mandibular bone defects repair

Background

The fetal amniotic membrane is a biological graft with unique qualities which all lead to wound protection, reducing discomfort, and achieving adequate epithelialization.

Materials and Methods

In this animal study, the second and third premolars of the mandible of 4 dogs were extracted. After 4 weeks, 20 mm of mandibular premolar site area were resected on both sides. The created defects on both sides were filled with xenograft. On one side, an amniotic membrane was placed over the graft particles and the reflected flap was sutured. The amount of bone formation in the defects was measured after 4 weeks for two of the dogs and after 8 weeks for the other two, using a caliper. Three histopathological samples from both sides were taken. The collected data were subjected to statistical analysis (Wilcoxon signed-rank and paired sample t-test) using SPSS software at a significant P = 0.05.

Results

In the test group, the quantity of bone was 56.81, whereas in the control group bone quantity was 37.38 with statistically significant differences (P = 0.025). In the amniotic membrane group, the inflammation intensity after the graft procedure was moderate (50%) in comparison to the control group where the inflammation was severe (62.5%) (P = 0.041).

Conclusion

The amniotic membrane can induce positive osteoinduction effects and be helpful in repairmen of bone defects such as the natural periosteum.

Spatiotemporal Regulation of the Bone Immune Microenvironment via Dam-Like Biphasic Bionic Periosteum for Bone Regeneration

The bone immune microenvironment (BIM) regulates bone regeneration and affects the prognosis of fractures. However, there is currently no effective strategy that can precisely modulate macrophage polarization to improve BIM for bone regeneration. Herein, a hybridized biphasic bionic periosteum, inspired by the BIM and functional structure of the natural periosteum, is presented. The gel phase is composed of genipin-crosslinked carboxymethyl chitosan and collagen self-assembled hybrid hydrogels, which act as the "dam" to intercept IL-4 released during the initial burst from the bionic periosteum fiber phase, thus maintaining the moderate inflammatory response of M1 macrophages for mesenchymal stem cell recruitment and vascular sprouting at the acute fracture. With the degradation of the gel phase, released IL-4 cooperates with collagen to promote the polarization towards M2 macrophages, which reconfigure the local microenvironment by secreting PDGF-BB and BMP-2 to improve vascular maturation and osteogenesis twofold. In rat cranial defect models, the controlled regulation of the BIM is validated with the temporal transition of the inflammatory/anti-inflammatory process to achieve faster and better bone defect repair. This strategy provides a drug delivery system that constructs a coordinated BIM, so as to break through the predicament of the contradiction between immune response and bone tissue regeneration.

Construction of artificial periosteum with methacrylamide gelatin hydrogel-wharton's jelly based on stem cell recruitment and its application in bone tissue engineering

The presence of periosteum can greatly affect the repair of a bone fracture. An artificial periosteum imitates the biological function of natural periosteum, which is capable of protecting and maintaining bone tissue structure and promoting bone repair. In our artificial periosteum, biocompatible methacrylate gelatin was used to provide the mechanical support of the membrane, E7 peptide added bioactivity, and Wharton's jelly provided the biological activity support of the membrane, resulting in a hydrogel membrane (G-E-W) for the chemotactic recruitment of bone marrow mesenchymal stem cells (BMSCs) and promoting cell proliferation and osteogenic differentiation. In an in vitro experiment, the G-E-W membrane recruited BMSCs and promoted cell proliferation and osteogenic differentiation. After 4 weeks and 8 weeks of implantation in a rat skull defect, the group implanted with a G-E-W membrane was superior to the blank control group and single-component membrane group in both quantity and quality of new bone. The artificial G-E-W membrane recruits BMSC chemotaxis and promotes cell proliferation and osteogenic differentiation, thereby effectively improving the repair efficiency of fractures and bone defects.

Periosteal topology creates an osteo-friendly microenvironment for progenitor cells

The periosteum on the skeletal surface creates a unique micro-environment for cortical bone homeostasis, but how this micro-environment is formed remains a mystery. In our study, we observed the cells in the periosteum presented elongated spindle-like morphology within the aligned collagen fibers, which is in accordance with the differentiated osteoblasts lining on the cortical surface. We planted the bone marrow stromal cells(BMSCs), the regular shaped progenitor cells, on collagen-coated aligned fibers, presenting similar cell morphology as observed in the natural periosteum. The aligned collagen topology induced the elongation of BMSCs, whichfacilitated the osteogenic process. Transcriptome analysis suggested the aligned collagen induced the regular shaped cells to present part of the periosteum derived stromal cells(PDSCs) characteristics by showing close correlation of the two cell populations. In addition, the elevated expression of PDSCs markers in the cells grown on the aligned collagen-coated fibers further indicated the function of periosteal topology in manipulating cells' behavior. Enrichment analysis revealed cell-extracellular matrix interaction was the major pathway initiating this process, which created an osteo-friendly micro-environment as well. At last, we found the aligned topology of collagen induced mechano-growth factor expression as the result of Igf1 alternative splicing, guiding the progenitor cells behavior and osteogenic process in the periosteum. This study uncovers the key role of the aligned topology of collagen in the periosteum and explains the mechanism in creating the periosteal micro-environment, which gives the inspiration for artificial periosteum design.

Controlled Release of Bone Morphogenetic Protein-2 Augments the Coupling of Angiogenesis and Osteogenesis for Accelerating Mandibular Defect Repair

Reconstruction of a mandibular defect is challenging, with high expectations for both functional and esthetic results. Bone morphogenetic protein-2 (BMP-2) is an essential growth factor in osteogenesis, but the efficacy of the BMP-2-based strategy on the bone regeneration of mandibular defects has not been well-investigated. In addition, the underlying mechanisms of BMP-2 that drives the bone formation in mandibular defects remain to be clarified. Here, we utilized BMP-2-loaded hydrogel to augment bone formation in a critical-size mandibular defect model in rats. We found that implantation of BMP-2-loaded hydrogel significantly promoted intramembranous ossification within the defect. The region with new bone triggered by BMP-2 harbored abundant CD31+ endomucin+ type H vessels and associated osterix (Osx)+ osteoprogenitor cells. Intriguingly, the new bone comprised large numbers of skeletal stem cells (SSCs) (CD51+ CD200+) and their multi-potent descendants (CD51+ CD105+), which were mainly distributed adjacent to the invaded blood vessels, after implantation of the BMP-2-loaded hydrogel. Meanwhile, BMP-2 further elevated the fraction of CD51+ CD105+ SSC descendants. Overall, the evidence indicates that BMP-2 may recapitulate a close interaction between functional vessels and SSCs. We conclude that BMP-2 augmented coupling of angiogenesis and osteogenesis in a novel and indispensable way to improve bone regeneration in mandibular defects, and warrants clinical investigation and application.

A Structured Scaffold Featuring Biomimetic Heterogeneous Architecture for the Regeneration of Critical-Size Bone Defects

The regeneration of critical-size bone defects on long bones has remained a significant challenge because of the complex anatomical structure and vascular network. In such circumstances, current biomaterial forms with homogeneous structure and function can hardly satisfy the need for both osteogenesis and angiogenesis. In the current study, a heterogeneous biomimetic structured scaffold was constructed with the help of a 3D printed mold to simultaneously mimic the outer/inner periosteum and intermediate bone matrix of a natural long bone. Because of the reinforcement via modified mesoporous bioactive glass nanoparticles (MBGNs), enhanced structural stability and adequate osteogenic capacity could be achieved for the intermediate layer of this scaffold. Conversely, GelMA incorporated with VEGF-loaded liposome exhibiting controlled release of the angiogenic factor was applied to the inner and outer layers of the scaffold. The resulting heterogeneous structured scaffold was shown to successfully guide bone regeneration and restoration of the natural bone anatomic structure, rendering it a promising candidate for future orthopedic clinical studies.

Targeted activation of androgen receptor signaling in the periosteum improves bone fracture repair

Low testosterone level is an independent predictor of osteoporotic fracture in elderly men as well as increased fracture risk in men undergoing androgen deprivation. Androgens and androgen receptor (AR) actions are essential for bone development and homeostasis but their linkage to fracture repair remains unclear. Here we found that AR is highly expressed in the periosteum cells and is co-localized with a mesenchymal progenitor cell marker, paired-related homeobox protein 1 (Prrx1), during bone fracture repair. Mice lacking the AR gene in the periosteum expressing Prrx1-cre (AR^-/Y;Prrx1::Cre) but not in the chondrocytes (AR^-/Y;Col-2::Cre) exhibits reduced callus size and new bone volume. Gene expression data analysis revealed that the expression of several collagens, integrins and cell adhesion molecules were downregulated in periosteum-derived progenitor cells (PDCs) from AR^-/Y;Prrx1::Cre mice. Mechanistically, androgens-AR signaling activates the AR/ARA55/FAK complex and induces the collagen-integrin α2β1 gene expression that is required for promoting the AR-mediated PDCs migration. Using mouse cortical-defect and femoral graft transplantation models, we proved that elimination of AR in periosteum of host mice impairs fracture healing, regardless of AR existence of transplanted donor graft. While testosterone implanted scaffolds failed to complete callus bridging across the fracture gap in AR^-/Y;Prrx1::Cre mice, cell-based transplantation using DPCs re-expressing AR could lead to rescue bone repair. In conclusion, targeting androgen/AR axis in the periosteum may provide a novel therapy approach to improve fracture healing.

Construction of developmentally inspired periosteum-like tissue for bone regeneration

The periosteum, a highly vascularized thin tissue, has excellent osteogenic and bone regenerative abilities. The generation of periosteum-mimicking tissue has become a novel strategy for bone defect repair and regeneration, especially in critical-sized bone defects caused by trauma and bone tumor resection. Here, we utilized a bone morphogenetic protein-2 (BMP-2)-loaded scaffold to create periosteum-like tissue (PT) in vivo, mimicking the mesenchymal condensation during native long bone development. We found that BMP-2-induced endochondral ossification plays an indispensable role in the construction of PTs. Moreover, we confirmed that BMP-2-induced PTs exhibit a similar architecture to the periosteum and harbor abundant functional periosteum-like tissue-derived cells (PTDCs), blood vessels, and osteochondral progenitor cells. Interestingly, we found that the addition of chondroitin sulfate (CS), an essential component of the extracellular matrix (ECM), could further increase the abundance and enhance the function of recruited PTDCs from the PTs and finally increase the regenerative capacity of the PTs in autologous transplantation assays, even in old mice. This novel biomimetic strategy for generating PT through in vivo endochondral ossification deserves further clinical translation.

Biomimetic three-layered membranes comprising (poly)-ε-caprolactone, collagen and mineralized collagen for guided bone regeneration

The distinct structural properties and osteogenic capacity are important aspects to be taken into account when developing guided bone regeneration membranes. Herein, inspired by the structure and function of natural periosteum, we designed and fabricated using electrospinning a fibrous membrane comprising (poly)--ε-caprolactone (PCL), collagen-I (Col) and mineralized Col (MC). The three-layer membranes, having PCL as the outer layer, PCL/Col as the middle layer and PCL/Col/MC in different ratios (5/2.5/2.5 (PCM-1); 3.3/3.3/3.3 (PCM-2); 4/4/4 (PCM-3) (%, w/w/w)) as the inner layer, were produced. The physiochemical properties of the different layers were investigated and a good integration between the layers was observed. The three-layered membranes showed tensile properties in the range of those of natural periosteum. Moreover, the membranes exhibited excellent water absorption capability without changes of the thickness. In vitro experiments showed that the inner layer of the membranes supported attachment, proliferation, ingrowth and osteogenic differentiation of human bone marrow-derived stromal cells. In particular cells cultured on PCM-2 exhibited a significantly higher expression of osteogenesis-related proteins. The three-layered membranes successfully supported new bone formation inside a critical-size cranial defect in rats, with PCM-3 being the most efficient. The membranes developed here are promising candidates for guided bone regeneration applications.

Fabrication of Mesoporous Silica Nanoparticle-Incorporated Coaxial Nanofiber for Evaluating the In Vitro Osteogenic Potential

The most important role of tissue engineering is to develop a biomaterial with a property that mimics the extracellular matrix (ECM) by enhancing the lineage-specific proliferation and differentiation with favorable regeneration property to aid in new tissue formation. Thus, to develop an ideal scaffold for bone repair, we have fabricated a composite nanofiber by the coaxial electrospinning technique. The coaxial electrospun nanofiber contains the core layer, consisting of polyvinyl alcohol (PVA) blended with oregano extract and mesoporous silica nanoparticles (PVA-OE-MSNPs), and the shell layer, consisting of poly-ε-caprolactone blended with collagen and hydroxyapatite (PCL-collagen-HAP). We evaluated the physicochemical properties of the nanofibers using X-ray diffraction (XRD), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FTIR). In vitro biocompatibility, cell adhesion, cell viability, and osteogenic potential were evaluated by 3-(4,5-dimethylthiazole-2-yl)-2,5-diphenlytetrazolium bromide (MTT), calcein AM, and alkaline phosphatase (ALP) activity and Alizarin Red staining in NIH 3T3/MG-63 cells. The results showed that the nanoparticle-incorporated coaxial nanofiber was observed with bead-free, continuous, and uniform fiber morphology with a mean diameter in the range of 310 ± 125 nm. From the biochemical studies, it is observed that the incorporation of nanofiber with HAP and MSNPs shows good swelling property with ideal porosity, biodegradation, and enhanced biomineralization property. In vitro results showed that the scaffolds with nanoparticles have higher cell adhesion, cell viability, ALP activity, and mineralization potential. Thus, the fabricated nanofiber could be an appropriate implantable biomaterial for bone tissue engineering.

Bioprinting of Stem Cells in Multimaterial Scaffolds and Their Applications in Bone Tissue Engineering

Bioprinting stem cells into three-dimensional (3D) scaffolds has emerged as a new avenue for regenerative medicine, bone tissue engineering, and biosensor manufacturing in recent years. Mesenchymal stem cells, such as adipose-derived and bone-marrow-derived stem cells, are capable of multipotent differentiation in a 3D culture. The use of different printing methods results in varying effects on the bioprinted stem cells with the appearance of no general adverse effects. Specifically, extrusion, inkjet, and laser-assisted bioprinting are three methods that impact stem cell viability, proliferation, and differentiation potential. Each printing method confers advantages and disadvantages that directly influence cellular behavior. Additionally, the acquisition of 3D bioprinters has become more prominent with innovative technology and affordability. With accessible technology, custom 3D bioprinters with capabilities to print high-performance bioinks are used for biosensor fabrication. Such 3D printed biosensors are used to control conductivity and electrical transmission in physiological environments. Once printed, the scaffolds containing the aforementioned stem cells have a significant impact on cellular behavior and differentiation. Natural polymer hydrogels and natural composites can impact osteogenic differentiation with some inducing chondrogenesis. Further studies have shown enhanced osteogenesis using cell-laden scaffolds in vivo. Furthermore, selective use of biomaterials can directly influence cell fate and the quantity of osteogenesis. This review evaluates the impact of extrusion, inkjet, and laser-assisted bioprinting on adipose-derived and bone-marrow-derived stem cells along with the effect of incorporating these stem cells into natural and composite biomaterials.

Hierarchical Nanostructured Electrospun Membrane with Periosteum-Mimic Microenvironment for Enhanced Bone Regeneration

An ideal periosteum substitute should be able to mimic the periosteum microenvironment that continuously provides growth factors, recruits osteoblasts, and subsequent extracellular matrix (ECM) mineralization to accelerate bone regeneration. Here, a calcium-binding peptide-loaded poly(ε-caprolactone) (PCL) electrospun membrane modified by the shish-kebab structure that can mimic the periosteum microenvironment was developed as a bionic periosteum. The calcium-binding peptide formed by the negatively charged heptaglutamate domain (E7) in the E7-BMP-2 with calcium ion in the tricalcium phosphate sol (TCP sol) through electrostatic chelation not only extended the release cycle of E7-BMP-2 but also promoted the biomineralization of the bionic periosteum. Cell experiments showed that the bionic periosteum could significantly improve the osteogenic differentiation of the rat-bone marrow-derived mesenchymal stem cells (rBMSCs) through both chemical composition and physical structure. The in vivo evaluation of the bionic periosteum confirmed the inherent osteogenesis of this periosteum microenvironment, which could promote the regeneration of vascularized bone tissue. Therefore, the hierarchical nanostructured electrospun membrane with periosteum-mimic microenvironment is a promising periosteum substitute for the treatment of bone defects.

Repair of long bone defects of large size using a tissue-engineered periosteum in a rabbit model

Tissue engineering is a promising approach for bone regeneration. In this study, we aimed to investigate whether tissue engineered periosteum (TEP), which was fabricated by combining osteogenically-induced mesenchymal stem cells (MSCs) with porcine small intestinal submucosa (SIS), could restore long bone defects of large size in rabbits. Twenty-four adult New Zealand white rabbits (NZWRs) were used in the experiments. Long bone defects of large size (30 mm-50 mm; average, 40 mm) were established on both sides of NZWRs' radii. The defects were treated with TEP (Group A), allogeneic deproteinized bone (DPB, Group B), TEP combined with DPB (Group C), and pure SIS (Group D). The healing outcome was evaluated by radiography and histological examination at 4, 8, and 12 weeks post-treatment. The radiographical findings showed that bone defects of large size were all repaired in Groups A, B and C within 12 weeks, whereas Group D (pure SIS group) failed to result in defect healing at 4, 8, and 12 weeks. Although there was some new bone regeneration connecting the allografts and bone ends, as observed under radiographical and histological observations, bone defects of large sizes were restored primarily by structurally allografted DPB within 12 weeks. The TEP groups (Groups A and C) showed partial or total bone regeneration upon histological inspection. Based on 12-week histological examinations, significantly more bone was formed in Group A than Group C (P < 0.05), and both groups formed significantly more bone than in Groups B and D. The results indicated that long bone defects of a large size could be restored by TEP or TEP combined with the DPB scaffold, and such materials provide an alternative approach to resolving pathological bone defects in clinical settings.

Poly-ε-caprolactone/Whitlockite Electrospun Bionic Membrane with an Osteogenic-Angiogenic Coupling Effect for Periosteal Regeneration

The periosteum is rich in vascular networks, osteoprogenitor cells, and stem cells and plays an important role in bone defect repair. However, existing artificial periosteum materials still have difficulty in meeting clinical requirements, such as good mechanical properties and bionic structure construction, osteogenic differentiation, and vascularization capabilities. Here, a poly-ε-caprolactone (PCL)/whitlockite (WH, 5, 10, 15 wt %) artificial periosteum with different doping amounts was prepared by electrospinning technology. According to the results of in vitro mineralization experiments, the rapid ion release from WH promotes the deposition of mineralized hydroxyapatite. Inductively coupled plasma-optical emission spectroscopy, in vitro angiogenesis, and cell migration experiments showed that the bionic periosteum of the 15% WH group had the best release rate of Mg²⁺ and the best ability to promote the human umbilical vein endothelial cell angiogenesis and migration. In addition, this group promoted collagen formation and calcium deposition. Finally, the subcutaneous implantation model was used to verify the biocompatibility and angiogenesis ability of the proposed membrane in vivo. Overall, this biomimetic PCL/WH nanofiber membrane combines the positive osteogenic differentiation ability and angiogenic ability of calcium phosphate materials and thus has good application prospects in the field of periosteal repair in the future.

An enhanced periosteum structure/function dual mimicking membrane forin-siturestorations of periosteum and bone

Periosteum plays a pivotal role in bone formation and reconstruction. The ideal repair process for critical-size bone defects with periosteum damage is to induce regeneration of periosteum tissue and the subsequent bone regeneration derived by the periosteum. Inspired by the bilayer structure of the natural periosteum, we develop a periosteum structure/function dual mimicking membrane for thein-siturestoration of periosteum and bone tissue. Among them, the macroporous fluffy guiding layer (TPF) simulates the fibrous layer of the natural periosteum, which is conducive to infiltration and oriented growth of fibroblasts. And the extracellular matrix-like bioactive layer (TN) simulates the cambium layer of the natural periosteum, which significantly enhances the proliferation and osteogenic differentiation of rat bone marrow mesenchymal stem cells. A middle dense layer (PC) connects the above two layers and has the function of preventing the invasion of soft tissues while enhancing the biomimetic periosteum.In vivorestoration results show that the tri-layer biomimetic periosteum (TPF/PC/TN) has an outstanding effect in promoting the regeneration of both vascularized periosteum and bone at the same time. Therefore, the enhanced biomimetic periosteum developed in this research has a great clinical value in the efficient and high-quality reconstruction of critical-size bone defects with periosteum damage.

Isolation and Culture of Periosteum-Derived Progenitor Cells from Mice

This chapter describes the methods of isolation of mouse periosteal progenitor cells. There are three basic methods utilized. The bone grafting method was developed utilizing the fracture healing process to expand the progenitor populations. Bone capping methods requires enzymatic digestion and purification of cells from the native periosteum, while the Egression/Explant method requires the least manipulation with placement of cortical bone fragments with attached periosteum in a culture dish. Various cell surface antibodies have been employed over the years to characterize periosteum derived progenitor cells, but the most consistent minimal criteria was recommended by the International Society for Cellular Therapy. Confirmation of the multipotent status of these isolated cells can be achieved by differentiation into the three basic mesodermal lineages in vitro.

The storage of skull bone flaps for autologous cranioplasty: literature review

The use of autologous bone flap for cranioplasty after decompressive craniectomy is a widely used strategy that allows alleviating health expenses. When the patient has recovered from the primary insult, the cranioplasty restores protection and cosmesis, recovering fluid dynamics and improving neurological status. During this time, the bone flap must be stored, but there is a lack of standardization of tissue banking practices for this aim. In this work, we have reviewed the literature on tissue processing and storage practices. Most of the published articles are focused from a strictly clinical and surgical point of view, paying less attention to issues related to tissue manipulation. When bone resorption is avoided and the risk of infection is controlled, the autograft represents the most efficient choice, with the lowest risk of complication. Otherwise, depending on the degree of involvement, the patient may have to undergo new surgery, assuming further risks and higher healthcare costs. Therefore, tissue banks must implement protocols to provide products with the highest possible clinical effectiveness, without compromising safety. With a centralised management of tissue banking practices there may be a more uniform approach, thus facilitating the standardization of procedures and guidelines.

Bioinspired membrane provides periosteum-mimetic microenvironment for accelerating vascularized bone regeneration

Periosteum plays a pivotal role in vascularization, ossification and remodeling during the healing process of bone injury. However, there are few studies focused on the construction of artificial implants with periosteum-mimetic effect. To emulate the primary role of natural periosteum or endosteal tissues in bone regeneration, here we provide a functional biomimetic membrane with micropatterns of site-specific biomineralization. The micropattern is generated by using printed hydroxyapatite nanoparticles (HANPs), combined with selective growth of biomineralized apatite and in situ coprecipitation with growth factors. The biomimetic membrane can sustainably provide a periosteum-mimetic microenvironment, such as long-term topographical guidance for cell recruitment and induced cell differentiation, by releasing calcium phosphate and growth factors. We demonstrated that rat mesenchymal stem cells (rMSCs) on such biomimetic membrane exhibited highly aligned organization, leading to enhanced angiogenesis and osteogenesis. In the rat calvarial defect model, our biomimetic membranes with biomineralized micropatterns could significantly enhance vascularized ossification and accelerate new bone formation. The current work suggests that the functionally biomimetic membranes with specific biomineralized micropatterns can be a promising alternative to periosteal autografts, with great potential for bench-to-bedside translation in orthopedics.

Periosteum Mimetic Coating on Structural Bone Allografts via Electrospray Deposition Enhances Repair and Reconstruction of Segmental Defects

Structural bone allograft transplantation remains one of the common strategies for repair and reconstruction of large bone defects. Due to the loss of periosteum that covers the outer surface of the cortical bone, the healing and incorporation of allografts is extremely slow and limited. To enhance the biological performance of allografts, herein, we report a novel and simple approach for engineering a periosteum mimetic coating on the surface of structural bone allografts via polymer-mediated electrospray deposition. This approach enables the coating on allografts with precisely controlled composition and thickness. In addition, the periosteum mimetic coating can be tailored to achieve desired drug release profiles by making use of an appropriate biodegradable polymer or polymer blend. The efficacy study in a murine segmental femoral bone defect model demonstrates that the allograft coating composed of poly(lactic-co-glycolic acid) and bone morphogenetic protein-2 mimicking peptide significantly improves allograft healing as evidenced by decreased fibrotic tissue formation, increased periosteal bone formation, and enhanced osseointegration. Taken together, this study provides a platform technology for engineering a periosteum mimetic coating which can greatly promote bone allograft healing. This technology could eventually result in an off-the-shelf and multifunctional structural bone allograft for highly effective repair and reconstruction of large segmental bone defects. The technology can also be used to ameliorate the performance of other medical implants by modifying their surfaces.

Nanotechnology Assisted Targeted Drug Delivery for Bone Disorders: Potentials and Clinical Perspectives

Nanotechnology and its allied modalities have brought revolution in tissue engineering and bone healing. The research on translating the findings of the basic and preclinical research into clinical practice is ongoing. Advances in the synthesis and design of nanomaterials along with advances in genomics and proteomics, and tissue engineering have opened a bright future for bone healing and orthopedic technology. Studies have shown promising outcomes in the design and fabrication of porous implant substrates that can be exploited as bone defect augmentation and drug-carrier devices. However, there are dozens of applications in orthopedic traumatology and bone healing for nanometer-sized entities, structures, surfaces, and devices with characteristic lengths ranging from tens 10s of nanometers to a few micrometers. Nanotechnology has made promising advances in the synthesis of scaffolds, delivery mechanisms, controlled modification of surface topography and composition, and biomicroelectromechanical systems. This study reviews the basic and translational sciences and clinical implications of the nanotechnology in tissue engineering and bone diseases. Recent advances in NPs assisted osteogenic agents, nanocomposites, and scaffolds for bone disorders are discussed.

Development of FGF-2-loaded electrospun waterborne polyurethane fibrous membranes for bone regeneration

Guided bone regeneration (GBR) membrane has been used to improve functional outcomes for periodontal regeneration. However, few studies have focused on the biomimetic membrane mimicking the vascularization of the periodontal membrane. This study aimed to fabricate waterborne polyurethane (WPU) fibrous membranes loaded fibroblast growth factor-2 (FGF-2) via emulsion electrospinning, which can promote regeneration of periodontal tissue via the vascularization of the biomimetic GBR membrane. A biodegradable WPU was synthesized by using lysine and dimethylpropionic acid as chain extenders according to the rule of green chemical synthesis technology. The WPU fibers with FGF-2 was fabricated via emulsion electrospinning. The results confirmed that controlled properties of the fibrous membrane had been achieved with controlled degradation, suitable mechanical properties and sustained release of the factor. The immunohistochemical expression of angiogenic-related factors was positive, meaning that FGF-2 loaded in fibers can significantly promote cell vascularization. The fiber scaffold loaded FGF-2 has the potential to be used as a functional GBR membrane to promote the formation of extraosseous blood vessels during periodontal repairing.

Irregular Bone Defect Repair Using Tissue-Engineered Periosteum in a Rabbit Model

Background:

In previous studies, we succeeded in repairing a long bone defect with tissue-engineered periosteum (TEP), fabricated by incorporating rabbit mesenchymal stem cells with small intestinal submucosa. In this study, we investigated the feasibility of allogeneic irregular bone defect repair using TEP.

Methods:

We performed a subtotal resection of the scapula in 36 rabbits to establish a large irregular bone defect model. The rabbits were then randomly divided into three groups (n = 12 per group) and the defects were treated with TEP (Group 1), allogeneic deproteinized bone (DPB) (Group 2) or a hybrid of TEP and DPB (Group 3). At 4, 8, and 12 weeks after surgery, the rabbits were sacrificed, and the implants were harvested. X-ray radiographic and histological examinations were performed to detect bone healing. Ink-formaldehyde perfusion was introduced to qualitatively analyze vascularization in TEP engineered new bone.

Results:

The repair of scapular defects was diverse in all groups, shown by radiographic and histological tests. The radiographic scores in Group 1 and Group 3 were significantly higher than Group 2 at 8 and 12 weeks (p < 0.05). Histological scores further proved that Group 1 had significantly greater new bone formation compared to Group 3 (p < 0.05), while Group 2 had the lowest osteogenesis at all time-points (p < 0.001). Ink-formaldehyde perfusion revealed aboundant microvessels in TEP engineered new bone.

Conclusion:

We conclude that TEP is promising for the repair of large irregular bone defects. As a 3D scaffold, DPB could provide mechanical support and a shaping guide when combined with TEP. TEP engineered new bone has aboundant microvessels.

Medial Femoral Condyle Periosteal Free Flap for the Treatment of Talus Avascular Necrosis

BACKGROUND

In patients with avascular necrosis (AVN) of the talus in the precollapse stage unresponsive to conservative measures, joint preservation should be considered. Good results have previously been reported for vascularized bone grafting. The medial femoral condyle (MFC) free flap has recently been introduced, which consists of corticoperiosteal bone. We present a novel surgical technique using a periosteal-only MFC (pMFC) free flap in the treatment of talus AVN.

METHODS

We retrospectively reviewed all pMFC free flaps performed from 2016 to 2018 in the precollapse stage of talus AVN. Surgical management included an ankle arthroscopy, talus core decompression, and ipsilateral pMFC free flap to the talus. Foot and Ankle Ability Measure (FAAM)-Activities of Daily Living (ADL) and visual analog scale (VAS) pain scores were evaluated, and pre- and postoperative imaging studies were assessed by a musculoskeletal-trained radiologist for all patients. Six pMFC free flaps in 5 patients were included in this case series. AVN etiology included idiopathic, posttraumatic, and sepsis-related treatment. All patients were female with an average age of 44.2 (range, 37-67) years. Average postoperative follow-up was 16.9 (range, 6-28) months.

RESULTS

Pre- to postoperative FAAM-ADL, ADL single assessment numeric evaluation, and VAS scores showed statistically significant improvement (P < .039). No reoperations or flap complications were observed. There was 1 minor complication, which included postoperative paresthesias at the pMFC harvest site. Postoperative x-rays showed no subsequent collapse, and magnetic resonance imaging (MRI) illustrated progressive improvement of bone marrow edema, decreased surrounding areas of AVN, and decreased joint effusion when compared to preoperative MRI.

CONCLUSION

The pMFC free flap is a novel modification of a previously described technique, which appears to have similar results compared to the traditional MFC free flap. It was safe and effective in the short term with excellent clinical and radiographic outcomes.

LEVEL OF EVIDENCE

Level IV, case series.

Programmed Sustained Release of Recombinant Human Bone Morphogenetic Protein-2 and Inorganic Ion Composite Hydrogel as Artificial Periosteum

Recombinant human bone morphogenetic protein-2 (rhBMP-2) and bioceramic are the widely used bioactive factors in treatment of bone defects, but these easily cause side effects because of uncontrollable local concentration. In this study, rhBMP-2 was grafted on the surface of mesoporous bioglass nanoparticles (MBGNs) with an amide bond and then photo-cross-linked together with methacrylate gelatin (GelMA); in this way, a GelMA/MBGNs-rhBMP-2 hydrogel membrane was fabricated to release rhBMP-2 in a controllable program during the early bone regeneration period and then release calcium and silicon ions to keep promoting osteogenesis instead of rhBMP-2 in a long term. In this way, rhBMP-2 can keep releasing for 4 weeks and then the ions keep releasing after 4 weeks; this process is matched to early and late osteogenesis procedures. In vitro study demonstrated that the early release of rhBMP-2 can effectively promote local cell osteogenic differentiation in a short period, and then, the inorganic ions can promote cell adhesion not only in the early stage but also keep promoting osteogenic differentiation for a long period. Finally, the GelMA/MBGNs-rhBMP-2 hydrogel shows a superior capacity in long-term osteogenesis and promoting bone tissue regeneration in rat calvarial critical size defect. This GelMA/MBGNs-rhBMP-2 hydrogel demonstrated a promising strategy for the controllable and safer use of bioactive factors such as rhBMP-2 in artificial periosteum to accelerate bone repairing.

Human Platelet Lysate Improves Bone Forming Potential of Human Progenitor Cells Expanded in Microcarrier-Based Dynamic Culture

Xenogeneic‐free media are required for translating advanced therapeutic medicinal products to the clinics. In addition, process efficiency is crucial for ensuring cost efficiency, especially when considering large‐scale production of mesenchymal stem cells (MSCs). Human platelet lysate (HPL) has been increasingly adopted as an alternative for fetal bovine serum (FBS) for MSCs. However, its therapeutic and regenerative potential in vivo is largely unexplored. Herein, we compare the effects of FBS and HPL supplementation for a scalable, microcarrier‐based dynamic expansion of human periosteum‐derived cells (hPDCs) while assessing their bone forming capacity by subcutaneous implantation in small animal model. We observed that HPL resulted in faster cell proliferation with a total fold increase of 5.2 ± 0.61 in comparison to 2.7 ± 02.22‐fold in FBS. Cell viability and trilineage differentiation capability were maintained by HPL, although a suppression of adipogenic differentiation potential was observed. Differences in mRNA expression profiles were also observed between the two on several markers. When implanted, we observed a significant difference between the bone forming capacity of cells expanded in FBS and HPL, with HPL supplementation resulting in almost three times more mineralized tissue within calcium phosphate scaffolds. FBS‐expanded cells resulted in a fibrous tissue structure, whereas HPL resulted in mineralized tissue formation, which can be classified as newly formed bone, verified by μCT and histological analysis. We also observed the presence of blood vessels in our explants. In conclusion, we suggest that replacing FBS with HPL in bioreactor‐based expansion of hPDCs is an optimal solution that increases expansion efficiency along with promoting bone forming capacity of these cells. stem cells translational medicine2019;8:810&821

Muscle stem cells: what's new in orthopedics?

BACKGROUND AND AIM OF THE WORK

Adult stem cells were studied as a source of potentially useful development for tissue engineering and repair techniques. The aim of this review is to clarify the actual and possible uses of muscle stem cells in orthopedics.

METHODS

A selection of studies was made to obtain a homogeneous and up to date overview on the muscle stem cells applications.

RESULTS

In recent years muscle was studied as a good source of adult stem cells that can differentiate into different cell lineages. Muscle stem cells are a heterogeneous population of cells, which demonstrated in vitro a great potential for the regeneration and repair of muscle, bone and cartilage tissue. Among muscle stem cells, satellite stem cells are the most known progenitor cells: they can differentiate in osteoblasts, adipocytes, chondrocytes and myocytes.

CONCLUSIONS

Although muscle stem cells are a promising field of research, more pre-clinical studies in animal models are still needed to determine the safety and efficiency of the transplant procedures in humans.

Development of biomimetic trilayer fibrous membranes for guided bone regeneration

in order to build fibrous bone tissue scaffolds for guided bone regeneration and to mimic the trilayer structure and the multifunctional properties of the natural periosteum, we fabricated two fibrous trilayer membranes by conjugate electrospinning technology, in which poly(ε-caprolactone) (PCL) fiber was designed as an outer layer, the mixed fibers of PCL and polyurethane (co-PUPCL) as the interlayer, and degradable polyurethane fibers with or without nano-hydroxyapatite (n-HA) as the inner layer (PUHA or PU). The microstructure and characteristics of the trilayer membranes were evaluated and different monolayer fibers were fabricated as the contrast samples. The tensile strength values of each layer increased from the inner layer to the outer layer in the designed structure, while the step-by-step electrospinning method produced good adhesion of different layers. Furthermore, the degradable properties and hydrophilicity of the layers changed with dissymmetric fibrous structures. Cell proliferation assay and cell morphology observation indicated that the PUHA inner fibrous layer exhibited better cell attachment and proliferation than PU. In addition, the osteogenicity of the PUHA fibrous layer has been attested through protein expression by the differentiation of rat mesenchymal stem cells (rMSCs) into the osteogenic lineage. Cell infiltration testing on the two sides of the trilayer membranes in vitro and in vivo showed that the inner layer had good cellular penetration deep into the scaffolds, whereas the cells were barred by the outer layer. We have developed a trilayer structured membrane with different polymer fibers to replicate the natural periosteum by improving functional outcomes, which is a promising fibrous scaffold for clinical use in the repair of destroyed bone.

Receptor activity-modifying protein 1 regulates the phenotypic expression of BMSCs via the Hippo/Yap pathway

Receptor activity-modifying protein 1 (RAMP1) might be a critical regulator during bone wound healing. However, the roles and mechanisms of RAMP1 in osteogenesis remain unclear. Here, we aimed to elucidate the role of RAMP1 and explore the effects of Yes-associated protein 1 (Yap1), an effector of the Hippo/Yap pathway, in this process. We used a RAMP1 overexpression lentiviral system in bone marrow mesenchymal stem cells (BMSCs), which enhanced RAMP1 expression in an effective, appropriate, and sustained manner. Alkaline phosphatase (ALP) activity assays and alizarin red staining showed that RAMP1 promoted osteogenic differentiation of BMSCs after calcitonin gene-related peptide (CGRP) treatment (10 ^-8  mol/L). Moreover, real-time polymerase chain reaction and Western blot analysis indicated that RAMP1 upregulated the expression of osteogenic phenotypic markers (ALP, runt-related transcription factor 2, osteopontin; p < 0.05). To further uncover the mechanism of RAMP1 in osteogenic differentiation, we used verteporfin (10 ^-7  mol/L) to block Yap1. Notably, verteporfin impaired RAMP1-induced osteogenesis. Taken together, our findings confirmed that RAMP1 is a key mediator of bone regeneration and indicate that RAMP1 promotes CGRP-induced osteogenic differentiation of BMSCs via regulation of the Hippo/Yap pathway.

Preparation of adriamycin gelatin microsphere-loaded decellularized periosteum that is cytotoxic to human osteosarcoma cells

The purpose of this study was to develop a novel approach to treat bone osteosarcoma using a multipurpose scaffold aiming for local drug delivery. The slowly releasing microspheres was designed to deliver the chemotherapy drug adriamycin (ADM) and a decellularized (D) periosteum scaffold (which is known to be able to promote bone regeneration) was used to carry these microspheres. D-periosteum was obtained by physical and chemical decellularization. Histological results showed that the cellular components were effectively removed. The D-periosteum showed an excellent cytocompatibility and the ability to promote adhesion and growth of fibroblasts. Two kinds of slowly releasing microspheres, adriamycin gelatin microspheres (ADM-GMS) and adriamycin poly (dl-lactide-co-glycolide) gelatin microspheres (ADM-PLGA-GMS), were prepared and anchored to D-periosteum, resulting in two types of drug-releasing regenerative scaffolds. The effectiveness of these two scaffolds in killing human osteosarcoma cells was tested by evaluating cell viability overtime of the cancer cells cultured with the scaffolds. In summary, a gelatin/decellularized periosteum-based biologic scaffold material was designed aiming for local delivery of chemotherapy drugs for osteosarcoma, with the results showing ability of the scaffolds in sustaining release of the cancer drug and in suppressing growth of the cancer cells in vitro.

Layer-by-layer nanofiber-enabled engineering of biomimetic periosteum for bone repair and reconstruction

Periosteum plays an indispensable role in bone repair and reconstruction. To recapitulate the remarkable regenerative capacity of periosteum, a biomimetic tissue-engineered periosteum (TEP) was constructed via layer-by-layer bottom-up strategy utilizing polycaprolactone (PCL), collagen, and nano-hydroxyapatite composite nanofiber sheets seeded with bone marrow stromal cells (BMSCs). When combined with a structural bone allograft to repair a 4 mm segmental bone defect created in the mouse femur, TEP restored donor-site periosteal bone formation, reversing the poor biomechanics of bone allograft healing at 6 weeks post-implantation. Further histologic analyses showed that TEP recapitulated the entire periosteal bone repair process, as evidenced by donor-dependent formation of bone and cartilage, induction of distinct CD31^high type H endothelium, reconstitution of bone marrow and remodeling of bone allografts. Compared to nanofiber sheets without BMSC seeding, TEP eliminated the fibrotic tissue capsule elicited by nanofiber sheets, leading to a marked improvement of osseointegration at the compromised periosteal site. Taken together, our study demonstrated a novel layer-by-layer engineering platform for construction of a versatile biomimetic periosteum, enabling further assembly of a multi-component and multifunctional periosteum replacement for bone defect repair and reconstruction.

Decellularized Periosteum-Covered Chitosan Globule Composite for Bone Regeneration in Rabbit Femur Condyle Bone Defects

Critical-sized bone defects are incapable of self-healing and are commonly seen in clinical practice. The authors explore a new treatment for this, decellularized periosteum is applied to chitosan globules (chitosan-DP globules) as a hybrid material. The efficacy of chitosan-DP globules on rabbit femoral condyle bone defects is assessed with biocompatibility, biomechanics, and osteogenic efficiency measurements, and compared with the results of chitosan globules and empty control. No difference in cytotoxicity is observed among chitosan-DP globules, chitosan globules, and the empty control. Chitosan-DP globules possesse a better surface for cell adhesion than did chitosan globules. Chitosan-DP globules demonstrate superior efficiency for osteogenesis in the defect area compared to chitosan globules as per microcomputed tomography examination and push-out testing, with relatively minor histological differences. Both chitosan globule groups show more satisfactory results than those for the empty control. The results implicate chitosan-DP globules as a promising solution for bone defects.

Repair of a perforated sinus membrane with an autogenous periosteal graft: a study in 24 patients

We describe a technique for repairing a perforation of the sinus membrane with a periosteal graft. Of 117 patients who had augmentation of the sinus floor, the sinus membrane perforated in 24, and these were repaired with autogenous periosteal grafts. Patients were followed up daily for the first 10days and monthly for the next six months, and clinical and radiographic variables were recorded. Patients had to be free of complications such as wound dehiscence, sinus infections, exposure of the graft, local inflammation, or pain. The radiographs showed correct osseointegration of all implants. Periosteal grafts are an effective alternative for repair of a perforation of the sinus membrane.