Utilization of Paneer Whey Waste for Cost-Effective Production of Rhamnolipid Biosurfactant

Production of Lipopeptide Biosurfactant Using Wastewater from Parboiled Paddy Rice and Evaluation of Antifungal Property of the Biosurfactant Against Two Dermatophyte Fungi

A previously isolated lipopeptide biosurfactant-producing bacterium Bacillus licheniformis SCV1 was investigated for the production of the biosurfactant using wastewater from parboiled paddy rice. The biosurfactant thus produced was evaluated for its antifungal property against dermatophyte fungi Trichophyton ajelloi and Microsporum fulvum. Results revealed that the bacterial strain reduced surface tension of the media from 56.16 ± 1 mN/m to 35 ± 0.9 mN/m within 12 h, which further shrank to 29.3 ± 1 mN/m in 24 h of incubation. The yield of the biosurfactant was 3.15 ± 0.25 g/L at 48 h of incubation. The obtained biosurfactant exhibited efficient emulsifying activity against a wide range of hydrophobic substrates such as crude oil, olive oil, engine oil, and kerosene oil used in the study. The critical micelle concentration of the biosurfactant was found to be 80 mg/L. Structural characterization using FT-IR and TLC revealed that the biosurfactant produced by the strain in the wastewater is a lipopeptide consisting of surfactin and iturin. LCMS analysis revealed that the surfactin homologs range from C12 to C17-surfactin while the iturin contains C13 to C17-iturin homologs. It also revealed an in vitro study that the biosurfactant has antifungal properties against dermatophyte fungi Trichophyton ajelloi and Microsporum fulvum. Microscopic observation of the hyphae of the treated dermatophyte revealed disruption and fissure of the mycelia. The chemical composition of the wastewater revealed that it contains adequate nutritional composition and micronutrients to support bacterial growth. This is the first report that the wastewater of parboiled paddy could be used as a low-cost substrate for the production of lipopeptide biosurfactant, and the biosurfactant could be used for preventing dermatophytes fungi.

Glycolipids biosurfactants production using low-cost substrates for environmental remediation: progress, challenges, and future prospects

The production of renewable materials from alternative sources is becoming increasingly important to reduce the detrimental environmental effects of their non-renewable counterparts and natural resources, while making them more economical and sustainable. Chemical surfactants, which are highly toxic and non-biodegradable, are used in a wide range of industrial and environmental applications harming humans, animals, plants, and other entities. Chemical surfactants can be substituted with biosurfactants (BS), which are produced by microorganisms like bacteria, fungi, and yeast. They have excellent emulsifying, foaming, and dispersing properties, as well as excellent biodegradability, lower toxicity, and the ability to remain stable under severe conditions, making them useful for a variety of industrial and environmental applications. Despite these advantages, BS derived from conventional resources and precursors (such as edible oils and carbohydrates) are expensive, limiting large-scale production of BS. In addition, the use of unconventional substrates such as agro-industrial wastes lowers the BS productivity and drives up production costs. However, overcoming the barriers to commercial-scale production is critical to the widespread adoption of these products. Overcoming these challenges would not only promote the use of environmentally friendly surfactants but also contribute to sustainable waste management and reduce dependence on non-renewable resources. This study explores the efficient use of wastes and other low-cost substrates to produce glycolipids BS, identifies efficient substrates for commercial production, and recommends strategies to improve productivity and use BS in environmental remediation.

Unlocking the potential of biosurfactants: Production, applications, market challenges, and opportunities for agro-industrial waste valorization

Biosurfactants are eco-friendly compounds with unique properties and promising potential as sustainable alternatives to chemical surfactants. The current review explores the multifaceted nature of biosurfactant production and applications, highlighting key fermentative parameters and microorganisms able to convert carbon-containing sources into biosurfactants. A spotlight is given on biosurfactants' obstacles in the global market, focusing on production costs and the challenges of large-scale synthesis. Innovative approaches to valorizing agro-industrial waste were discussed, documenting the utilization of lignocellulosic waste, food waste, oily waste, and agro-industrial wastewater in the segment. This strategy strongly contributes to large-scale, cost-effective, and environmentally friendly biosurfactant production, while the recent advances in waste valorization pave the way for a sustainable society.

An insight into the utilization of microbial biosurfactants pertaining to their industrial applications in the food sector

Microbial biosurfactants surpass synthetic alternatives due to their biodegradability, minimal toxicity, selective properties, and efficacy across a wide range of environmental conditions. Owing to their remarkable advantages, biosurfactants employability as effective emulsifiers and stabilizers, antimicrobial and antioxidant attributes, rendering them for integration into food preservation, processing, formulations, and packaging. The biosurfactants can also be derived from various types of food wastes. Biosurfactants are harnessed across multiple sectors within the food industry, ranging from condiments (mayonnaise) to baked goods (bread, muffins, loaves, cookies, and dough), and extending into the dairy industry (cheese, yogurt, and fermented milk). Additionally, their impact reaches the beverage industry, poultry feed, seafood products like tuna, as well as meat processing and instant foods, collectively redefining each sector's landscape. This review thoroughly explores the multifaceted utilization of biosurfactants within the food industry as emulsifiers, antimicrobial, antiadhesive, antibiofilm agents, shelf-life enhancers, texture modifiers, and foaming agents.

Biodegradation of carbofuran by Pseudomonas aeruginosa S07: biosurfactant production, plant growth promotion, and metal tolerance

Pesticides are an indispensable part of modern farming as it aids in controlling pests and hence increase crop yield. But, unmanaged use of pesticides is a growing concern for safety and conservation of the environment. In the present study, a novel biosurfactant-producing bacterium, Pseudomonas aeruginosa S07, was utilized to degrade carbofuran pesticide, and it was obtained at 150 mg/L concentration; 89.2% degradation was achieved on the 5th day of incubation in in vitro culture condition. GC-MS (gas chromatography and mass spectrometry) and LC-MS (liquid chromatography and mass spectrometry) analyses revealed the presence of several degradation intermediates such as hydroxycarbofurnan, ketocarbofuran, and hydroxybenzofuran, in the degradation process. The bacterium was found to exhibit tolerance towards several heavy metals: Cu, Co, Zn, Ni, and Cd, where maximum and least tolerance were obtained against Co and Ni, respectively. Additionally, the bacterium also possesses plant growth-promoting activity showing positive results in nitrogen fixation, phosphate solubilising, ammonia production, and potassium solubilizing assays. Thus, from the study, it can be assumed that the bacterium can be useful in the production of bioformulation for remediation and rejuvenation of pesticide-contaminated sites in the coming days.

A comprehensive review on production of bio-surfactants by bio-degradation of waste carbohydrate feedstocks: an approach towards sustainable development

The advancement of science and technology demands chemistry which is safer, smarter and green by nature. The sustainability of science thus requires well-behaved alternates that best suit the demand. Bio-surfactants are surface active compounds, established to affect surface chemistry. In general, microbial bio-surfactants are a group of structurally diverse molecules produced by different microbes. A large number of bio-surfactants are produced during hydrocarbon degradation by hydrocarbonoclistic microorganisms during their own growth on carbohydrates and the production rate is influenced by the rate of degradation of carbohydrates. The production of such biological surfactants is thus of greater importance. This write up is a dedicated review to update the existing knowledge of inexpensive carbohydrate sources as substrates, microorganisms and technologies of biosurfactant production. This is an economy friendly as well as sustainable approach which will facilitate achieving some sustainable development goals. The production is dependent on the fermentation strategies, different factors of the microbial culture broth and downstream processing; these all have been elaborately presented in this article.

Valorization of Food Waste to Produce Value-Added Products Based on Its Bioactive Compounds

The rapid growth of the global population and changes in lifestyle have led to a significant increase in food waste from various industrial, agricultural, and household sources. Nearly one-third of the food produced annually is wasted, resulting in severe resource depletion. Food waste contains rich organic matter, which, if not managed properly, can pose a serious threat to the environment and human health, making the proper disposal of food waste an urgent global issue. However, various types of food waste, such as waste from fruit, vegetables, grains, and other food production and processing, contain important bioactive compounds, such as polyphenols, dietary fiber, proteins, lipids, vitamins, organic acids, and minerals, some of which are found in greater quantities in the discarded parts than in the parts accepted by the market. These bioactive compounds offer the potential to convert food waste into value-added products, and fields including nutritional foods, bioplastics, bioenergy, biosurfactants, biofertilizers, and single cell proteins have welcomed food waste as a novel source. This review reveals the latest insights into the various sources of food waste and the potential of utilizing bioactive compounds to convert it into value-added products, thus enhancing people’s confidence in better utilizing and managing food waste.

Sustainable production of biosurfactants via valorisation of industrial wastes as alternate feedstocks

Globally, the rapid increase in the human population has given rise to a variety of industries, which have produced a variety of wastes. Due to their detrimental effects on both human and environmental health, pollutants from industry have taken centre stage among the various types of waste produced. The amount of waste produced has therefore increased the demand for effective waste management. In order to create valuable chemicals for sustainable waste management, trash must be viewed as valuable addition. One of the most environmentally beneficial and sustainable choices is to use garbage to make biosurfactants. The utilization of waste in the production of biosurfactant provides lower processing costs, higher availability of feedstock and environmental friendly product along with its characteristics. The current review focuses on the use of industrial wastes in the creation of sustainable biosurfactants and discusses how biosurfactants are categorized. Waste generation in the fruit industry, agro-based industries, as well as sugar-industry and dairy-based industries is documented. Each waste and wastewater are listed along with its benefits and drawbacks. This review places a strong emphasis on waste management, which has important implications for the bioeconomy. It also offers the most recent scientific literature on industrial waste, including information on the role of renewable feedstock for the production of biosurfactants, as well as the difficulties and unmet research needs in this area.

Understanding the management of household food waste and its engineering for sustainable valorization- A state-of-the-art review

Increased urbanization and industrialization accelerated demand for energy, large-scale waste output, and negative environmental consequences. Therefore, the implementation of an effective solid-waste-management (SWM) policy for the handling of food waste is of great importance. The global food waste generation is estimated at about 1.6 gigatons/yr which attributes to an economic revenue of 750 billion USD. It can be converted into high-value enzymes, surfactants, Poly-hydroxybutyrate, biofuels, etc. However, the heterogeneous composition of food with high organic load and varying moisture content makes their transformation into value-added products difficult. This review aims to bring forth the possibilities and repercussions of food waste management. The socio-economic challenges related to SWM are comprehensively discussed particularly in terms of environmental concern. The engineering aspect in the collection, storage, and biotransformation of food waste into useful value-added products such as biofuels, advanced biomaterials, bioactive compounds, and platform chemicals are critically reviewed for efficient food waste management.

Biodegradation of hazardous naphthalene and cleaner production of rhamnolipids - Green approaches of pollution mitigation

Toxic and hazardous waste poses a serious threat to human health and the environment. Green remediation technologies are required to manage such waste materials, which is a demanding and difficult task. Here, effort was made to explore the role of Pseudomonas aeruginosa SR17 in alleviating naphthalene via catabolism and simultaneously producing biosurfactant. The results showed up to 89.2% naphthalene degradation at 35 °C and pH 7. The GC/MS analysis revealed the generation of naphthalene degradation intermediates. Biosurfactant production led to the reduction of surface tension of the culture medium to 34.5 mN/m. The biosurfactant was further characterized as rhamnolipids. LC-MS of the column purified biosurfactant revealed the presence of both mono and di rhamnolipid congeners. Rhamnolipid find tremendous application in medical field and as well as in detergent industry and since they are of biological origin, they can be used as favorable alternative against their chemical counterparts. The study demonstrated that catabolism of naphthalene and concurrent formation of rhamnolipid can result in a dual activity process, namely environmental cleanup and production of a valuable microbial metabolite. Additionally, the present-day application of rhamnolipids is highlighted.

Microbial biosurfactants: a review of recent environmental applications

Microbial biosurfactants are low-molecular-weight surface-active compounds of high industrial interest owing to their chemical properties and stability under several environmental conditions. The chemistry of a biosurfactant and its production cost are defined by the selection of the producer microorganism, type of substrate, and purification strategy. Recently, biosurfactants have been applied to solve or contribute to solving some environmental problems, with this being their main field of application. The most referenced studies are based on the bioremediation of contaminated soils with recalcitrant pollutants, such as hydrocarbons or heavy metals. In the case of heavy metals, biosurfactants function as chelating agents owing to their binding capacity. However, the mechanism by which biosurfactants typically act in an environmental field is focused on their ability to reduce the surface tension, thus facilitating the emulsification and solubilization of certain pollutants (in-situ biostimulation and/or bioaugmentation). Moreover, despite the low toxicity of biosurfactants, they can also act as biocidal agents at certain doses, mainly at higher concentrations than their critical micellar concentration. More recently, biosurfactant production using alternative substrates, such as several types of organic waste and solid-state fermentation, has increased its applicability and research interest in a circular economy context. In this review, the most recent research publications on the use of biosurfactants in environmental applications as an alternative to conventional chemical surfactants are summarized and analyzed. Novel strategies using biosurfactants as agricultural and biocidal agents are also presented in this paper.

Biosurfactant Production from Lactobacilli: an Insight on the Interpretation of Prevailing Assessment Methods

Biosurfactants constitute amphiphilic molecules, receiving increased attention as environmentally benign, biodegradable alternatives to substitute for the petroleum derived counterparts in food, pharmaceutical and cosmetics applications. However, their high production cost hinders industrial production. In this study, fifty GRAS lactobacilli strains were screened for their ability to produce biosurfactants, implementing different substrates. Cheese whey permeate (CWP) was also assessed as a low-cost and inherent lactobacilli substrate, aiming to mitigate its polluting impact, expand valorization strategies, alleviate costs deriving from commercial supplements and enhance overall sustainability. Surface tension, emulsification activity (E24) and oil displacement were deployed to identify the most promising candidates. Results reveal surface tension as the most robust method and underline the effect of substrate on biosurfactant synthesis. Likewise, this study indicates the fundamental role of including the final fermentation substrate (CWP) during strain selection to avoid misinterpretation of results and enhance subsequent bioprocess integration.

Valorization of dairy waste and by-products through microbial bioprocesses

Waste is an inherent and unavoidable part of any process which can be attributed to various factors such as process inefficiencies, usability of resources and discarding of not so useful parts of the feedstock. Dairy is a burgeoning industry following the global population growth, resulting in generation of waste such as wastewater (from cleaning, processing, and maintenance), whey and sludge. These components are rich in nutrients, organic and inorganic materials. Additionally, the presence of alkaline and acidic detergents along with sterilizing agents in dairy waste makes it an environmental hazard. Thus, sustainable valorization of dairy waste requires utilization of biological methods such as microbial treatment. This review brings forward the current developments in utilization and valorization of dairy waste through microbes. Aerobic and anaerobic treatment of dairy waste using microbes can be a sustainable and green method to generate biofertilizers, biofuels, power, and other biobased products.

Potential biodegradation of Tapis Light Crude Petroleum Oil, using palm oil mill effluent final discharge as biostimulant for isolated halotolerant Bacillus strains

Petroleum hydrocarbon pollution in marine waters has been an extremely significant environmental and health issue worldwide. This study aims at constructing an efficient indigenous bacterial consortium to biodegrade Tapis Light Crude Petroleum Oil (TLCO). The local agro-industrial wastewater of palm oil mill effluent final discharge (POME FD) was used as biostimulant to enhance the biodegradation efficiency. In this study, three TLCO degrading bacteria were isolated from seawater samples collected. Molecular identification using 16S rRNA genes sequencing was done and results show that these isolated strains belong to: Bacillus tropicus, Bacillus licheniformis and Bacillus subtilis. Bacterial consortium tested using four different concentrations of POME FD (0.1, 0.25, 0.5, and 1%) as biostimulant and TLCO (0.5 and 1.0%) degradation capability was investigated. The residual TLCO in culture medium after 40 days was analysed. The results confirmed that POME FD dosage of 0.25% is optimum for the bacterial consortium and can degrade 99.85% of TLCO at 0.5%. However, TLCO degradation with POME FD dosage (0.25%) in TLCO (1.0%) was found optimum, with biodegradation reaching up to 95.23% in 40 days. This study is a beginning for the future development of a consortium of petroleum hydrocarbon degrading bacteria to mitigate oil spills in the Malaysian shoreline.

Synthesis, characterization, and evaluation of antibacterial efficacy of rhamnolipid-coated zinc oxide nanoparticles against Staphylococcus aureus

The antimicrobial efficacy of rhamnolipid is well established against a wide range of pathogens. However little is known about the enhancement of antimicrobial efficacy of rhamnolipid in the form of nanoparticles. With a curiosity of enhancing antimicrobial activity, a study has been carried out to evaluate the antimicrobial efficacy of rhamnolipid-coated zinc oxide nanoparticles. The zinc oxide nanoparticles were synthesized with rhamnolipid, produced by Pseudomonas aeruginosa JS29. The rhamnolipid-coated zinc oxide nanoparticles were characterized by FTIR, XRD, TGA, TEM, and SAED. The antimicrobial and antibiofilm efficacy of the nanoparticles was evaluated against Staphylococcus aureus MTCC 96. FTIR, XRD, TEM, and SAED analyses confirmed that the nanoparticles contain both rhamnolipid and zinc as constituents and are polycrystalline with sizes ranging from 40 to 50 nm. At a concentration of 250 µg/ml, rhamnolipid-coated zinc oxide nanoparticles exhibited 80% growth inhibition of the pathogen. Again, at the same concentration, the nanoparticle was observed to inhibit 78% of biofilm formation while disrupting 100% of preformed biofilm. The nanoparticles demonstrated an enhanced inhibitory and antibiofilm efficacy against the pathogen compared to the individual effect of both rhamnolipid and zinc oxide nanoparticles. With the established non-toxicity of rhamnolipid-coated zinc oxide nanoparticles in fibroblast cell lines, the nanoparticles could be a promising pharmaceutical alternative.

Environmental life cycle assessment of polyhydroxyalkanoates production from cheese whey

Cheese whey (CW) is the main by-product of the dairy industry and is often considered one of the main agro-industrial biowaste streams to handle, especially within the European Union, where the diary activities play an essential role in the agrarian economy. In the paper, Life Cycle Assessment (LCA) is used to analyse the feasibility of producing polyhydroxyalkanoates (PHA) as the main output of an innovative CW valorisation route which is benchmarked against a conventional anaerobic digestion (AD) process. To this aim, the LCA inventory data are derived from lab-scale PHA accumulation tests performed on real CW, while data from the literature of concern are used for modelling both the PHA extraction from the accumulating biomass and for the alternative CW valorisation through AD. The comparison shows that AD would have better environmental performances than the baseline PHA production scenario. For example, the climate change indicator values result 44.8 and -35.7 kg CO₂ eq./t CW for the baseline PHA recovery and AD, respectively. LCA proved to be a useful tool to highlight the weak points of innovative processes and suggest proper improvements. Once improved and again analysed through the LCA, the PHA production process from CW shows that environmental performance comparable to AD may be achieved. With reference, again, to the climate change indicator the value can be reduced to -50.3 kg CO₂ eq./t CW for the improved PHA production process.

Bio-cleaning Efficiency of Rhamnolipids Produced from Native Pseudomonas aeruginosa Grown on Agro-industrial By-products for Liquid Detergent Formulation

The cleaning activity of surface-active agents such as rhamnolipids (RLs) requires utmost effectiveness and is employed abundantly in various industries, particularly laundry cleaning, detergents, and cosmetics. In the current study, RLs were produced from Pseudomonas aeruginosa isolated from oil-contaminated soil using a minimal medium amended with agro-industrial by-products of refinery vegetable oil wastes (comprising of unsaturated types of fatty acids as determined by GC analysis) and dairy whey. The results showed that an amount of 5.72 g/L of RLs were obtained, while lower concentrations were obtained using chemically defined carbon sources. Ten congeners of mono- and di-RLs were detected by LC-MS, and they reduced the surface tension of water to 26 mN/m with a critical micelle concentration of 33 mg/L. Furthermore, the produced RLs showed promising cleaning and detergency properties in the removal of different stains on tested fabrics with a Stain Removal Index (SRI) of 17.45%. Moreover, an efficient cleaning was obtained when RLs were applied to a liquid detergent formulation model, and a cleaning power (∆E) of 245.95 and SRI of 36.28% were achieved. The present work showed that the produced RLs could be exploited as a powerful and alternative eco-friendly cleaning agent in many industries.

Bioremediation of Total Petroleum Hydrocarbons (TPH) by Bioaugmentation and Biostimulation in Water with Floating Oil Spill Containment Booms as Bioreactor Basin

A crude oil spill is a common issue during offshore oil drilling, transport and transfer to onshore. Second, the production of petroleum refinery effluent is known to cause pollution due to its toxic effluent discharge. Sea habitats and onshore soil biota are affected by total petroleum hydrocarbons (TPH) as a pollutant in their natural environment. Crude oil pollution in seawater, estuaries and beaches requires an efficient process of cleaning. To remove crude oil pollutants from seawater, various physicochemical and biological treatment methods have been applied worldwide. A biological treatment method using bacteria, fungi and algae has recently gained a lot of attention due to its efficiency and lower cost. This review introduces various studies related to the bioremediation of crude oil, TPH and related petroleum products by bioaugmentation and biostimulation or both together. Bioremediation studies mentioned in this paper can be used for treatment such as emulsified residual spilled oil in seawater with floating oil spill containment booms as an enclosed basin such as a bioreactor, for petroleum hydrocarbons as a pollutant that will help environmental researchers solve these problems and completely clean-up oil spills in seawater.

Performance and kinetics of benzo(a)pyrene biodegradation in contaminated water and soil and improvement of soil properties by biosurfactant amendment

As a hydrophobic pollutant, benzo(a)pyrene (BaP) is difficult to be degraded by microbes due to its poor water solubility. To improve its water solubility, this study harvested a biosurfactant from swine wastewater. The role of the biosurfactant in BaP biodegradation in contaminated water and soil were investigated. The biodegradation kinetics of BaP in contaminated water and the improvement of soil properties were determined. Results showed that critical micelle concentration (CMC) of the biosurfactant was 46.8 mg/L. The biosurfactant has a high pH stability in range of 3-9 and a strong salt stability in NaCl concentration range of 0-20%. At concentrations of 1, 2, 3, 4 and 5 CMC, the biosurfactant increased BaP water solubility by 1.4, 2.6, 4.0, 5.2 and 6.6 times. BaP biodegradation in contaminated water was effectively promoted by the biosurfactant, and the concentrations of BaP in sludge phase decreased to 1.015 mg/L (47.9% decrement) and 0.675 mg/L (65.4% decrement) when the dosed biosurfactant were 1 and 3 CMC, respectively. The biodegradation kinetics of BaP in contaminated water by the biosurfactant fitted well with the two-compartment kinetic model well (R² > 0.90). For the bioremediation of BaP contaminated soil, adding 0.1%-0.5% (w/w) biosurfactant biodegraded 39.2%-84.8% of BaP, while the control without biosurfactant was 24.2%. In addition, the application of the biosurfactant significantly improved the properties of the contaminated soil, behaved as the increase in microbial quantity, water holding capacity (WHC) and dehydrogenase (DH) activity of the soil. To sum up, the biosurfactant facilitated the BaP biodegradation and can be effectively used in in-site remediation of polycyclic aromatic hydrocarbons (PAHs) (BaP in this study) contaminated water and soil.

Enhancement of ethylbenzene removal from contaminated gas and corresponding mechanisms in biotrickling filters by a biosurfactant from piggery wastewater

This study prepared a biosurfactant by using piggery wastewater to enhance ethylbenzene removal from contaminated gas in a biotrickling filter (BTF). Experiments were conducted to investigate the enhancement of ethylbenzene removal and the biofilm characteristics in present of the biosurfactant. Results demonstrated that the optimal biosurfactant concentration was 0.1 CMC and the corresponding ethylbenzene removal rate was 87.2%, much higher than that (68.9%) achieved in free of biosurfactant. The inlet ethylbenzene concentration and the empty bed residence time (EBRT) affected ethylbenzene removal as well. In present of 0.1 CMC of biosurfactant, ethylbenzene removal rate decreased from 87.2% to 72.2% with the increasing inlet ethylbenzene from 1000 to 2200 mg/m³, and decreased from 91.1% to 42.7% with the EBRT shorten from 30 to 7.5 s. For the enhancement mechanisms of ethylbenzene removal in BTF, the biosurfactant changed the contents of extracellular polymers (EPS) and decreased negative surface charge of the biofilm in the BTF, which improved the mass transfer of ethylbenzene to biofilm and facilitated the aggregation of microbes, and further improved the removal of ethylbenzene. All in all, the biosurfactant would be a feasible way to enhance the removal of ethylbenzene by the BTF.

Bio-based rhamnolipids production and recovery from waste streams: Status and perspectives

Bio-based rhamnolipid production from waste streams is gaining momentum nowadays because of increasing market demand, huge range of applications and its economic and environment friendly nature. Rhamnolipid type biosurfactants are produced by microorganisms as secondary metabolites and have been used to reduce surface/interfacial tension between two different phases. Biosurfactants have been reported to be used as an alternative to chemical surfactants. Pseudomonas sp. has been frequently used for production of rhamnolipid. Various wastes can be used in production of rhamnolipid. Rhamnolipids are widely used in various industrial applications. The present review provides information about structure and nature of rhamnolipid, production using different waste materials and scale-up of rhamnolipid production. It also provides comprehensive literature on various industrial applications along with perspectives and challenges in this research area.

Microbial strategies for bio-transforming food waste into resources

With the changing life-style and rapid urbanization of global population, there is increased generation of food waste from various industrial, agricultural, and household sources. According to Food and Agriculture Organization (FAO), almost one-third of the total food produced annually is wasted. This poses serious concern as not only there is loss of rich resources; their disposal in environment causes concern too. Food waste is rich in organic, thus traditional approaches of land-filling and incineration could cause severe environmental and human health hazard by generating toxic gases. Thus, employing biological methods for the treatment of such waste offers a sustainable way for valorization. This review comprehensively discusses state-of-art knowledge about various sources of food waste generation, their utilization, and valorization by exploiting microorganisms. The use of microorganisms either aerobically or anaerobically could be a sustainable and eco-friendly solution for food waste management by generating biofuels, electrical energy, biosurfactants, bioplastics, biofertilizers, etc.

Improvement in Production of Rhamnolipids Using Fried Oil with Hydrophilic Co-substrate by Indigenous Pseudomonas aeruginosa NJ2 and Characterizations

Commercialization of biosurfactant remained a challenge due to lack of structural variation and economical process using low-cost materials and low productivity. Improvement in production of biosurfactant using fried oil with hydrophilic co-substrate by an indigenous strain was studied. Microbe isolated from exhaust chimney condensate was screened for utilization of mixed carbon source and then identified as Pseudomonas aeruginosa NJ2 by 16S rDNA gene sequence. FTIR, HPLC, and NMR analyses confirmed that biosurfactant was rhamnolipids. Batch fermentation using mixed substrates improved the cell growth yield to 1.48 g/L (2.34 times) and product yield to 4.28 g/L (3.4 times) with maximum specific growth rate 0.1 h^-1 (two times) and specific production rate 0.5 h^-1 (13 times) due to higher cell density and direct synthesis of lipid and rhamnose moieties through central metabolic pathways of the two substrates. Increase in carrying capacity and coefficient value (two times) of logistic equation confirmed the significance of mixed substrates. The biosurfactant showed excellent surface active and thermo-chemical stability properties. Economical production of biosurfactant with high yield and productivity could be possible by isolation of mixed carbon source utilizing strain and optimization of waste substrates from oil/soapstock and sugar/corn syrup industries in media.

Saponins and microbial biosurfactants: Potential raw materials for the formulation of cosmetics

The cosmetic industry is currently one of the fasting growing sections of the economy in many countries. The recent tendency toward the use of cosmetics of a natural origin has driven the industry to seek alternatives to synthetic components in the formulation of products. Biosurfactants are natural compounds that have considerable potential for application in the formulation of safe, effective cosmetics as a replacement for commonly used chemical tensioactive agents. The present review provides essential information on the physicochemical and biological properties of saponins and microbial biosurfactants employed in cosmetic products, with a focus on the use of these natural compounds in shampoos, addressing the current state of research and patents involving biosurfactants for this purpose. The challenges and prospects of this cosmetic application are also discussed. © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 34:1482-1493, 2018.

Growth profiling, kinetics and substrate utilization of low-cost dairy waste for production of β-cryptoxanthin by Kocuria marina DAGII

The dairy industry produces enormous amount of cheese whey containing the major milk nutrients, but this remains unutilized all over the globe. The present study investigates the production of β-cryptoxanthin (β-CRX) by Kocuria marina DAGII using cheese whey as substrate. Response surface methodology (RSM) and an artificial neural network (ANN) approach were implemented to obtain the maximum β-CRX yield. Significant factors, i.e. yeast extract, peptone, cheese whey and initial pH, were the input variables in both the optimizing studies, and β-CRX yield and biomass were taken as output variables. The ANN topology of 4-9-2 was found to be optimum when trained with a feed-forward back-propagation algorithm. Experimental values of β-CRX yield (17.14 mg l-1) and biomass (5.35 g l-1) were compared and ANN predicted values (16.99 mg l-1 and 5.33 g l-1, respectively) were found to be more accurate compared with RSM predicted values (16.95 mg l-1 and 5.23 g l-1, respectively). Detailed kinetic analysis of cellular growth, substrate consumption and product formation revealed that growth inhibition took place at substrate concentrations higher than 12% (v/v) of cheese whey. The Han and Levenspiel model was the best fitted substrate inhibition model that described the cell growth in cheese whey with an R2 and MSE of 0.9982% and 0.00477%, respectively. The potential importance of this study lies in the development, optimization and modelling of a suitable cheese whey supplemented medium for increased β-CRX production.

Microbial production of rhamnolipids using sugars as carbon sources

Rhamnolipids are a class of biosurfactants with effective surface-active properties. The high cost of microbial production of rhamnolipids largely affects their commercial applications. To reduce the production post, research has been carried out in screening more powerful strains, engineering microbes with higher biosurfactant yields and exploring cheaper substrates to reduce the production cost. Extensive refining is required for biosurfactant production using oils and oil-containing wastes, necessitating the use of complex and expensive biosurfactant recovery methods such as extraction with solvents or acid precipitation. As raw materials normally can account for 10-30% of the overall production cost, sugars have been proven to be an alternative carbon source for microbial production of rhamnolipids due to its lower costs and straightforward processing techniques. Studies have thus been focused on using tropical agroindustrial crop residues as renewable substrates. Herein, we reviewed studies that are using sugar-containing substrates as carbon sources for producing rhamnolipids. We speculate that sugars derived from agricultural wastes rich in cellulose and sugar-containing wastes are potential carbon sources in fermentation while challenges still remain in large scales.

Characterization, phylogenetic distribution and evolutionary trajectories of diverse hydrocarbon degrading microorganisms isolated from refinery sludge

Phylogenic association between bacteria living under harsh conditions can provide important information on adaptive mechanism, survival strategy and their potential application. Indigenous microorganisms isolated from toxic refinery oily sludge with ability to degrade a diverse range of hydrocarbons were identified and characterized. The strains including Pseudomonas aeruginosa RS1, Microbacterium sp. RS2, Bacillus sp. RS3, Acinetobacter baumannii RS4 and Stenotrophomonas sp. RS5 could utilize n-alkanes, cycloalkanes, polynuclear aromatic hydrocarbons (PAHs) with 2-4 rings and also substituted PAHs as sole substrate. The phylogenetic position of Bacillus sp. RS3 and Pseudomonas sp. RS1 was tested by applying the maximum likelihood (ML) method to the aligned 16S rRNA nucleotide sequences of PAH and aliphatic hydrocarbon degrading strains belonging to the corresponding genus. The base substitution matrix created with each set of organisms capable of degrading aromatic and aliphatic hydrocarbons showed significant transitional event with high values of transition: transversion ratio (R) under all conditions. The guanine-cytosine (GC) content of the hydrocarbon degrading test strains was also found to be highest for the clade which harbored them. The test strains consistently occupied a distinct terminal end within the phylogenetic tree constructed by ML analysis. This study reveals that the refinery sludge imposed environmental stress on the bacterial strains which possibly caused significant genetic alteration and phenotypic adaptation. Due to the divergent evolution of the Pseudomonas and Bacillus strains in the sludge, they appeared distinctly different from other hydrocarbon degrading strains of the same genus.

Characterization of Biosurfactant Produced during Degradation of Hydrocarbons Using Crude Oil As Sole Source of Carbon

Production and spillage of petroleum hydrocarbons which is the most versatile energy resource causes disastrous environmental pollution. Elevated oil degrading performance from microorganisms is demanded for successful microbial remediation of those toxic pollutants. The employment of biosurfactant-producing and hydrocarbon-utilizing microbes enhances the effectiveness of bioremediation as biosurfactant plays a key role by making hydrocarbons bio-available for degradation. The present study aimed the isolation of a potent biosurfactant producing indigenous bacteria which can be employed for crude oil remediation, along with the characterization of the biosurfactant produced during crude oil biodegradation. A potent bacterial strain Pseudomonas aeruginosa PG1 (identified by 16s rDNA sequencing) was isolated from hydrocarbon contaminated soil that could efficiently produce biosurfactant by utilizing crude oil components as the carbon source, thereby leading to the enhanced degradation of the petroleum hydrocarbons. Strain PG1 could degrade 81.8% of total petroleum hydrocarbons (TPH) after 5 weeks of culture when grown in mineral salt media (MSM) supplemented with 2% (v/v) crude oil as the sole carbon source. GCMS analysis of the treated crude oil samples revealed that P. aeruginosa PG1 could potentially degrade various hydrocarbon contents including various PAHs present in the crude oil. Biosurfactant produced by strain PG1 in the course of crude oil degradation, promotes the reduction of surface tension (ST) of the culture medium from 51.8 to 29.6 mN m⁻¹, with the critical micelle concentration (CMC) of 56 mg L⁻¹. FTIR, LC-MS, and SEM-EDS studies revealed that the biosurfactant is a rhamnolipid comprising of both mono and di rhamnolipid congeners. The biosurfactant did not exhibit any cytotoxic effect to mouse L292 fibroblastic cell line, however, strong antibiotic activity against some pathogenic bacteria and fungus was observed.

Biosurfactants in cosmetic formulations: trends and challenges

Cosmetic products play an essential role in everyone's life. People everyday use a large variety of cosmetic products such as soap, shampoo, toothpaste, deodorant, skin care, perfume, make-up, among others. The cosmetic industry encompasses several environmental, social and economic impacts that are being addressed through the search for more efficient manufacturing techniques, the reduction of waste and emissions and the promotion of personal hygiene, contributing to an improvement of public health and at the same time providing employment opportunities. The current trend among consumers is the pursuit for natural ingredients in cosmetic products, as many of these products exhibit equal, better or additional benefits in comparison with the chemical-based products. In this sense, biosurfactants are natural compounds with great potential in the formulation of cosmetic products given by their biodegradability and impact in health. Indeed, many of these biosurfactants could exhibit a "prebiotic" character. This review covers the current state-of-the-art of biosurfactant research for cosmetic purposes and further discusses the future challenges for cosmetic applications.

Development of an Efficient Bacterial Consortium for the Potential Remediation of Hydrocarbons from Contaminated Sites

The intrinsic biodegradability of hydrocarbons and the distribution of proficient degrading microorganisms in the environment are very crucial for the implementation of bioremediation practices. Among others, one of the most favorable methods that can enhance the effectiveness of bioremediation of hydrocarbon-contaminated environment is the application of biosurfactant producing microbes. In the present study, the biodegradation capacities of native bacterial consortia toward total petroleum hydrocarbons (TPH) with special emphasis to poly aromatic hydrocarbons were determined. The purpose of the study was to isolate TPH degrading bacterial strains from various petroleum contaminated soil of Assam, India and develop a robust bacterial consortium for bioremediation of crude oil of this native land. From a total of 23 bacterial isolates obtained from three different hydrocarbons contaminated samples five isolates, namely KS2, PG1, PG5, R1, and R2 were selected as efficient crude oil degraders with respect to their growth on crude oil enriched samples. Isolates KS2, PG1, and R2 are biosurfactant producers and PG5, R1 are non-producers. Fourteen different consortia were designed involving both biosurfactant producing and non-producing isolates. Consortium 10, which comprises two Bacillus strains namely, Bacillus pumilus KS2 and B. cereus R2 (identified by 16s rRNA sequencing) has shown the best result in the desired degradation of crude oil. The consortium showed degradation up to 84.15% of TPH after 5 weeks of incubation, as revealed from gravimetric analysis. FTIR (Fourier transform infrared) and GCMS (Gas chromatography-mass spectrometer) analyses were correlated with gravimetric data which reveals that the consortium has removed a wide range of petroleum hydrocarbons in comparison with abiotic control including different aliphatic and aromatic hydrocarbons.