Removal of Bisphenol A and Its Potential Substitutes by Biodegradation

Co-metabolic Biotransformation of Bisphenol AF by a Bisphenol A-Growing Bacterial Enrichment Culture

The fluorinated bisphenol A (2,2-bis[4-hydroxyphenyl]propane, BPA) substitute bisphenol AF (BPAF) could be more persistent and toxic than BPA, but little is known about its environmental fate. In this study, we established a co-metabolic BPAF-degrading bacterial enrichment culture with BPA as the growth substrate. BPAF degradation by the enrichment culture was dependent on BPA, and BPAF could be eliminated to below the detection limit with successive additions of BPA. BPAF was mainly degraded via phenolic ring hydroxylation and sequential ring cleavage, which are minor BPA transformation pathway. Conjugated BPAF products were also identified based on the characteristic CF3- fragment and were found to accumulate during BPAF degradation. Sphingopyxis was the key BPA and BPAF degrader in the aerobic enrichment cultures, which was the most abundant genera in only BPA-added and BPA and BPAF-added cultures and was proven to be able to degrade BPA and BPAF by isolation. The aerobic co-metabolic BPAF degrading community also contain non-BPA and BPAF degraders, such as Pandoraea, which may play a supporting role in the community.

Application of terpenoids for the remediation of environmental water polluted with bisphenol A and its analogs using an in silico approach

Nowadays, there is a global concern over water quality and the impact of contamination on both natural ecosystems and human well-being. Plastics, ubiquitous in modern life, may release harmful chemicals when they reach aquatic environments. Among them, bisphenol A (BPA) and its alternatives, such as bisphenol S (BPS), bisphenol F (BPF), and others, are of special concern because their presence in water systems can have detrimental effects on human health and aquatic organisms due to their endocrine-disrupting properties. This study explores the potential of terpenoids, sustainable and environmentally friendly solvents, for efficiently removing bisphenols from contaminated environmental water. Using an in silico approach based on the Conductor-like Screening Model for Realistic Solvents (COSMO-RS) theory, more than 30 terpenoids were screened, and carvone was found to be an excellent candidate due to its high solvent capacity and low toxicity. The impact of pH, temperature, stirring conditions, and sample:extractant phase ratios on the extraction efficiency were investigated. A design of experiments revealed optimal conditions for the extraction process and demonstrated that carvone can effectively extract bisphenols (nearly 100 % for most of them) under a wide range of conditions, showing the robustness and efficiency of the extraction method, even in environmental samples. The paper provides valuable insights into the potential of terpenoids, specifically carvone, as a sustainable and eco-friendly solvent for removing bisphenol contaminants from environmental water bodies. The findings of this study offer a promising solution to address water contamination issues, aligning with the principles of Green Chemistry and contributing to a more environmentally responsible approach to water remediation.

Benzotriazoles and bisphenols in wastewater from the food processing industry and the quantitative changes during mechanical/biochemical treatment processes

Benzotriazoles (BTRs) and bisphenols (BPs), categorized as contaminants of emerging concern (CECs), pose significant risks to human health and ecosystems due to their endocrine-disrupting properties and environmental persistence. This study investigates the occurrence and behavior of nine BTRs and ten BPs in wastewater generated in a large-scale meat processing plant, evaluating the effectiveness of a modern mechanical-biological industrial on-site treatment plant in removing these contaminants, and based on the concentration levels from eleven sampling points at different stages of the treatment process. The method used to determine these micropollutants' concentration was ultrasound-assisted emulsification-microextraction for analytes isolation and gas chromatography-mass spectrometry for detection (USAEME-GC/MS). The results indicate that the rigorous quality control processes in the meat processing facility effectively limit the presence of these micropollutants, especially concerning BPs, which are absent or below detection limits in raw wastewater. While the concentrations of some of these micropollutants increased at different points in the treatment process, these values were relatively low, typically below one microgram per liter. Among the compounds analyzed, the only one present after completing the treatment was 5Cl-BTR (maximum concentration: 3007 ng/L), and these contamination levels are around seven times lower than the reference value associated with non-cancer health risk for drinking water. This study contributes to understanding these CECs in industrial wastewater and highlights the importance of effective treatment systems for environmental protection.

A targeted review on occurrence, remediation, and risk assessments of bisphenol A in Africa

Bisphenol A (BPA) is a vital raw material used to manufacture various household and commercial goods. However, BPA is a contaminant of emerging concern (CEC) and an endocrine-disrupting chemical (EDC) capable of migrating and bio-accumulating in environmental and biological compartments. At threshold levels, they become toxic causing adverse health and environmental issues. BPA's occurrence in food, food contact materials (FCMs), beverages, water, cosmetics, consumer goods, soil, sediments, and human/biological fluids across Africa was outlined. Unlike most reviews, it further collated data on BPA remediation techniques, including the human and ecological risk assessment studies conducted across Africa. A systematic scrutiny of the major indexing databases was employed extracting relevant data for this study. Results reveal that only 10 out of 54 countries have researched BPA in Africa. BPA levels in water were the most investigated, whereas levels in cosmetics and consumer goods were the least studied. Maximum BPA concentrations found in Africa were 3,590,000 ng/g (cosmetic and consumer goods), 154,820,000 ng/g (soils), 189 ng/mL (water), 1139 ng/g (food), and 208.55 ng/mL (biological fluids). The optimum percentage removal/degradation of BPA was within 70-100%. The potential health and ecological risk levels were assessed by comparing them with recommended limits and were found to fall within safe/low risks to unsafe/high risks. In conclusion, this study revealed that there is still little research on BPA in Africa. Levels detected in some matrices call for increased research, stricter health and environmental regulations, and surveillance.

National investigation of bisphenols in the surface soil in China

The long-term production and extensive use have resulted in the widespread presence of bisphenols (BPs) in the environment. In order to clarify the pollution characteristics and potential sources of BPs, the national scale surface soil samples were collected in China in 2019. The results demonstrated that 32 target BPs existed widely in soil with the highest concentration for bisphenol A (BPA), and at least 2 BPs were detected in each sample. The total concentration of Σ32BPs (from 0.387 to 713 ng/g) exhibited a stepwise decrease from southeastern coast to inland regions, and due to the presence of more pollution sources concentrations of Σ32BPs in urban areas were slightly higher than rural areas. The different industrial structures (such as plastics, epoxy resins, and thermal paper) may be the important factors for the different pollution levels between southeastern coast and other regions. In addition, the high organic matter content in soil and low temperature may be the reasons for high concentrations of Σ32BPs in Northeast China. The results of source identification using the Positive Matrix Factorization model indicated that BPs in soil were originated from three sources: old sources represented by BPA, relatively new sources characterized by bisphenol S, and sources from specific industries using bisphenol F. The estimated daily intake indicated that BPA exposure through soil accounted for only a small proportion of the total exposure compared to other exposure routes, and the risk by BPA in soil can be negligible to human health. In summary, the study provided basic pollution information of BPs in Chinese surface soil for future related studies.

Monitoring studies on contamination of urban runoff with hazardous benzotriazoles and bisphenols in one of the least polluted places worldwide

Benzotriazoles (BTR) and bisphenols (BP) are artificial contaminants of emerging concern (CECs) commonly found in everyday products. This study focuses on urban runoff to investigate the occurrence of BTRs and BPs in Iceland, regarded as one of the least polluted places in the world, which made it reasonable to confirm or deny the presence of these micropollutants in its environment. Samples collected in February 2023 (SC1) and August 2024 (SC2) from seven locations along Iceland's Ring Road were evaluated to determine the occurrence of seven BTRs (1H-BTR, 4Me-BTR, 5Me-BTR, 5Cl-BTR, UV-P, UV-326, UV-329) and six BPs (BPF, BPE, BPA, BPZ, BPAP, BPM) in the runoff, using the ultrasound-assisted emulsification-microextraction for analytes isolation and gas chromatography-mass spectrometry for detection (USAEME-GC/MS). All locations showed detectable and varying levels of BTRs and BPs, with 5Cl-BTR (11.6 μg/L) and BPF (56.3 μg/L), both in SC1, demonstrating the highest concentrations, providing valuable insights into their prevalence and distribution. A correlational analysis investigated the connection between these pollutants and various characteristics associated with the locations along the Ring Road. This study contributes to the essential comprehension of these CECs, serving as input for future strategies for monitoring and mitigating their impact.

Integrated analysis reveals the immunotoxicity mechanism of BPs on human lymphocytes

Bisphenol A (BPA) is a well-documented endocrine-disrupting chemical widely used in plastic products. In addition to its endocrine-disrupting effects, BPA exhibits immunotoxicity. Many countries have banned BPA because of its adverse effects on human health. In recent years, many chemicals such as bisphenol B (BPB), bisphenol E (BPE), bisphenol S (BPS), and bisphenol fluorene (BHPF) have been used to replace BPA. Because these replacement chemicals have chemical structures similar to that of BPA, they may also harm human health. However, their immunotoxicity and the molecular mechanisms underlying their toxicity remain largely unknown. The aim of this study was to investigate the immunotoxicity of BPA and its replacement chemicals, as well as the underlying mechanisms by exposing primary human lymphocytes to BPA and its replacement chemicals. Our results showed that exposure to BPA and its replacement chemicals altered the interleukin (IL) and cytokine production, such as IL-1b, IL-5, IL-6, IL-8, interferon alfa-2b (IFN-a2B), and tumor necrosis factor alpha (TNF-α), in the lymphocytes. Among these, BPA and BHPF caused a greater inhibition. Using comparative transcriptomic analysis, we further investigated the biological processes and signaling pathways altered by BHPF exposure. Our data highlighted alterations in the immune response, T cell function, and cytokine-cytokine receptor interactions in human lymphocytes through the deregulation of gene clusters. In addition, the results of ingenuity pathway analysis demonstrated the inhibition of T lymphocyte function, including differentiation, movement, and infiltration. Our results, for the first time, delineate the mechanisms underlying the immunotoxicity of BHPF in human lymphocytes.

Experimental Model Exposed to Bisphenol and Submitted to a High-Fat Diet and Related Morphologic Testicular Parameters Alterations Analysis

PURPOSE

To evaluate the morphological and stereological parameters of the testicles in mice exposed to bisphenol S and/or high-fat diet-induced obesity.

MATERIAL AND METHODS

Forty adult male C57BL/6 mice were fed a standard diet (SC) or high-fat diet (HF) for a total of 12 weeks. The sample was randomly divided into 4 experimental groups with 10 mices as follows: a) SC - animals fed a standard diet; b) SC-B - animals fed a standard diet and administration of BPS (25 μg/kg of body mass/day) in drinking water; c) HF: animals fed a high-fat diet; d) HF-B - animals fed a high-fat diet and administration of BPS (25 μg/Kg of body mass/day) in drinking water. BPS administration lasted 12 weeks, following exposure to the SC and HF diets. BPS was diluted in absolute ethanol (0.1%) and added to drinking water (concentration of 25 μg/kg body weight/day). The animals were euthanized, and the testes were processed and stained with hematoxylin and eosin (H&E) for morphometric and stereological parameters, including density of seminiferous tubules per area, length density and total length of seminiferous tubules, height of the tunica albuginea and the diameter of the seminiferous tubules. The images were captured with an Olympus BX51 microscope and Olympus DP70 camera. The stereological analysis was done with the Image Pro and Image J programs. Means were statistically compared using ANOVA and the Holm-Sidak post-test (p<0.05).

RESULTS

The seminiferous tubule density per area reduced in all groups when compared with SC samples (p<0.001): HF (40%), SC-B 3(2%), and HF-B (36%). Length density was reduced significantly (p<0.001) in all groups when compared with SC group: HF (40%), SC-B (32%), and HF-B (36%). The seminiferous tubule total length was reduced (p<0.001) when compared to f HF (28%) and SC-B (26%) groups. The tubule diameter increased significantly (p<0.001) only when we compared the SC group with SC (54%) an SC-B (25%) groups and the tunica thickness increased significantly only in HF group (117%) when compared with SC-B (20%) and HF-B 31%.

CONCLUSION

Animals exposed to bisphenol S and/or high-fat diet-induced obesity presented important structural alterations in testicular morphology.

Bisphenol A-What Do We Know? A Global or Local Approach at the Public Health Risk Level

BPA has demonstrated enormous multisystem and multi-organ toxicity shown mainly in animal models. Meanwhile, the effects of its exposure in humans still require years of observation, research, and answers to many questions. Even minimal and short-term exposure contributes to disorders or various types of dysfunction. It is released directly or indirectly into the environment at every stage of the product life cycle, demonstrating its ease of penetration into the body. The ubiquity and general prevalence of BPA influenced the main objective of the study, which was to assess the toxicity and health effects of BPA and its derivatives based on the available literature. In addition, the guidelines of various international institutions or regions of the world in terms of its reduction in individual products were checked. Bisphenol A is the most widely known chemical and perhaps even the most studied by virtually all international or national organizations, but nonetheless, it is still controversial. In general, the level of BPA biomonitoring is still too high and poses a potential threat to public health. It is beginning to be widely argued that future toxicity studies should focus on molecular biology and the assessment of human exposure to BPA, as well as its substitutes. The effects of its exposure still require years of observation, extensive research, and answers to many questions. It is necessary to continue to deepen the knowledge and interest of many organizations, companies, and consumers around the world in order to make rational purchases as well as future choices, not only consumer ones.

Peracetic acid activated by nickel cobaltite as effective oxidizing agent for BPA and its analogues degradation

The presented research concerns the use of nickel cobaltite nanoparticles (NiCo2O4 NPs) for the heterogeneous activation of peracetic acid and application of NiCo2O4-PAA system for degradation 10 organic micropollutants from the group of bisphenols. The bisphenols removal (initial concentration 1 μM) process was optimized by selecting the appropriate process conditions. The optimal amount of catalyst (115 mg/L), peracetic acid (PAA) concentration (7 mM) and pH (7) were determined using response surface analysis in the Design of Experiment. Then, NiCo2O4 NPs were used to check the possibility of reuse in subsequent oxidation cycles. The work also attempts to explain the mechanism of oxidation of the studied micropollutants. The participation of the sorption process on the catalyst was excluded and based on the experiments with radical scavengers it can be concluded that the oxidation proceeds in a radical pathway, mainly with participation of O2•- radicals. Experiments conducted in real water matrices exhibit low impact on degradation efficiency. Toxicity tests with green alga Acutodesmus obliquus and aquatic plant Lemna minor showed that post-reaction mixture influenced growth and the content of photosynthetic pigments in concentration dependent manner.

Exploring additives beyond phthalates: Release from plastic mulching films, biodegradation and occurrence in agricultural soils

It is widely recognized that applications of plastic films result in plastic pollution in agroecosystems. However, there is limited knowledge on the release and occurrence of additives beyond phthalates in agricultural soil. In this study, the rates of release and biodegradation of various additives, including phthalates, bisphenols, organophosphate esters, phenolic antioxidants, and ultraviolet absorbents from mulching films in soil were quantified by laboratory incubation. The rates of release and biodegradation ranged from 0.069 d-1 to 5.893 d-1 and from 1.43 × 10-3 d-1 to 0.600 d-1, respectively. Both of these rates were affected by temperature, flooding, and the properties of additives, films, and soils. An estimated 4000 metric tons of these additives were released into soil annually in China exclusively. The total concentrations of these additives in 80 agricultural soils varied between 228 and 3455 μg kg-1, with phenolic antioxidants, phthalates, and bisphenols accounting for 54.1%, 25.2%, and 17.9% of the total concentrations, respectively. A preliminary risk assessment suggested that the current levels of these additives could potentially present moderate hazards to the soil ecosystem.

Ecotoxicological effects and bioaccumulation of BPA analogues and their mixture in the clam Ruditapes philippinarum

Bisphenol A is recognized as an endocrine disruptor that can affect several biological processes in marine species. Consequently, its use has been restricted and it has been replaced with other similar compounds named bisphenol A analogues (BPA analogues). BPA analogues are speculatively considered safer compounds than BPA and their usage is increasing with a consequent higher environmental release. In this study, specimens of the clam Ruditapes philippinarum were exposed to three main BPA analogues, namely BPAF, BPF, BPS and their mixture at an environmentally relevant concentration of 300 ng/L for 7 and 14 days. Effects on biomarkers indicative of cytotoxicity, oxidative stress and damage and neurotoxicity were evaluated. In addition, bioaccumulation of the compound tested was analysed in clam soft tissues. Results showed that BPA analogues at an environment concentration affected cellular parameters and antioxidant system causing also oxidative damage, suggesting that BPA analogues can be harmful compounds for clams.

Promoting Effect of Silver Oxide Nanoparticles on the Oxidation of Bisphenol B by Ferrate(VI)

Bisphenol B (BPB, 2,2-bis(4-hydroxyphenyl) butane), as a substitute for bisphenol A, has been widely detected in the environment and become a potential threat to environmental health. This work found that silver oxide nanoparticles (Ag2O) could greatly promote the removal of BPB by ferrate (Fe(VI)). With the presence of 463 mg/L Ag2O, the amount of Fe(VI) required for the complete removal of 10 μM BPB will be reduced by 70%. Meanwhile, the recyclability and stability of Ag2O have been verified by recycling experiments. The characterization results and in situ electrochemical analyses showed that Ag(II) was produced from Ag(I) in the Fe(VI)-Ag2O system, which has a higher electrode potential to oxidize BPB to enhance its removal. A total of 13 intermediates were identified by high-resolution mass spectrometry, and three main reaction pathways were proposed, including oxygen transfer, bond breaking, and polymerization. Based on the toxicity assessment through the ECOSAR program, it is considered that the presence of Ag2O reduced the toxicity of BPB oxidation intermediates to aquatic organisms. These results would deepen our understanding of the interaction between Fe(VI) and Ag2O, which may provide an efficient and environmentally friendly method for water and wastewater treatment.

Can BPA Analogs Affect Cellular and Biochemical Responses in the Microalga Phaeodactylum tricornutum Bohlin?

Bisphenol A analogs (BPA analogs) are emerging contaminants with a rising production caused by the replacement of BPA with these compounds. The increased production of BPA analogs is leading to their increased release into various ecosystems, including marine ones. The aim of this study was to evaluate the biological effects of BPA analogs on a primary producer, the diatom Phaeodactylum tricornutum Bohlin. Three different BPA analogs (BPAF, BPF, and BPS) and their mixture were tested at the environmental relevant concentration of 300 ng/L. Growth, cell size and several biomarkers of oxidative stress and oxidative damage were measured. Our results indicated that the tested compounds caused a reduced growth rate and induced oxidative stress, altering many antioxidant enzymes in P. tricornutum. However, no oxidative damages were observed.

Light-Driven MXene-Based Microrobots: Mineralization of Bisphenol A to CO2 and H2 O

Light-driven magnetic MXene-based microrobots (MXeBOTs) have been developed as an active motile platform for efficiently removing and degrading bisphenol A (BPA). Light-driven MXeBOTs are facilitated with the second control engine, i.e., embedded Fe2 O3 nanoparticles (NPs) for magnetic propulsion. The grafted bismuth NPs act as cocatalysts. The effect of the BPA concentration and the chemical composition of the swimming environment on the stability and reusability of the MXeBOTs are studied. The MAXBOTs, a developed motile water remediation platform, demonstrate the ability to remove/degrade approximately 60% of BPA within just 10 min and achieve near-complete removal/degradation (≈100%) within 1 h. Above 86% of BPA is mineralized within 1 h. The photocatalytic degradation of BPA using Bi/Fe/MXeBOTs demonstrates a significant advantage in the mineralization of BPA to CO2 and H2 O.

The microbial removal of bisphenols in aquatic microcosms and associated alteration in bacterial community

The concept of the study resulted from numerous concerns around bisphenol A (BPA) and bisphenol S (BPS) in aquatic environments. In this study, river water and sediment microcosms highly polluted with bisphenols and bioaugmented with two BPs-removing bacterial strains were constructed. The study aimed to determine the rate of high-concentrated BPA and BPS (BPs) removal from river water and sediment microniches, and the effect of water bioaugmentation with bacterial consortium on the removal rates of these pollutants. Moreover, the impact of introduced strains and exposure to BPs on the structural and functional composition of the autochthonous bacterial communities was elucidated. Our findings indicate that the removal activity of autochthonous bacteria was sufficient for effectively BPA elimination and reducing BPS content in the microcosms. The number of introduced bacterial cells decreased continuously until day 40, and on consecutive sampling days, no bioaugmented cells were detected. Sequencing analysis of the total 16S rRNA genes revealed that the community composition in bioaugmented microcosms amended with BPs differed significantly from those treated either with bacteria or BPs. A metagenomic analysis found an increase in the abundance of proteins responsible for xenobiotics removal in BPs-amended microcosms. This study provides new insights into the effects of bioaugmentation with a bacterial consortium on bacterial diversity and BPs removal in aquatic environments.

Thermal and bisphenol-A adsorption properties of a zinc ferrite/β-cyclodextrin polymer nanocomposite

The present study investigated the use of a nanocomposite, produced by reinforcing nanosize zinc ferrite (ZnFe₂O₄) in a porous β-CD based polymeric matrix (β-CD-E-T/ZnFe₂O₄), for the removal of Bisphenol A (BPA) from aqueous solutions via adsorption. The thermal stability of the β-CD-based polymer and β-CD-E-T/ZnFe₂O₄ nanocomposite were investigated using simultaneous thermal analysis at four heating rates. Non-isothermal isoconversion methods were employed to study the thermal degradation kinetics of the β-CD based polymer before and after ZnFe₂O₄ nano-filling. The results showed that ZnFe₂O₄ nano-reinforcement increased the activation energy barrier for the thermal degradation of the β-CD-based polymeric matrix. Adsorption experiments showed that the β-CD-E-T/ZnFe₂O₄ nanocomposite exhibited very high BPA adsorption within 5 minutes. Isotherm, kinetics, and thermodynamic investigations revealed that the adsorption of BPA was via multilayer adsorption on a heterogeneous β-CD-E-T/ZnFe₂O₄ surface. The thermodynamic studies indicated that BPA adsorption on β-CD-E-T/ZnFe₂O₄ was spontaneous and exothermic. Overall, the β-CD-E-T/ZnFe₂O₄ nanocomposite showed less thermal degradation and high efficiency for removing BPA from contaminated water, indicating its potential as a promising material for wastewater treatment applications.

Effects of bisphenols on lipid metabolism and neuro-cardiovascular toxicity in marine medaka larvae

Bisphenols are environmental endocrine disruptors that have detrimental effects on aquatic organisms. Using marine medaka larvae, this study explored the effects of bisphenol compounds [bisphenol A (BPA), bisphenol S (BPS), bisphenol F (BPF), and bisphenol AF (BPAF)] on the early growth and development of aquatic organisms. Marine medaka larvae were exposed to bisphenol compounds at concentrations of 0.05, 0.5, and 5 μM for 72 h, and changes in heartbeat rate, behavior, hormone levels, and gene expression were determined. Bisphenols were shown to have a toxic effect on the cardiovascular system of larvae and can cause neurotoxicity and endocrine disruption, such as changes to thyroid-related hormones. Functional enrichment showed that bisphenols mainly affect lipid metabolism and cardiac muscle contraction of larvae, which implied that the main toxic effects of bisphenols on marine medaka larvae targeted the liver and heart. This study provides a theoretical foundation for evaluating the toxicological effects of bisphenols on the early development of aquatic organisms.

Aerobic degradation of bisphenol A by Pseudomonas sp. LM-1: characteristic and pathway

Bisphenol A (BPA) has been widely used in the manufacture of polymeric materials. BPA is regarded as an endocrine disrupting chemical, posing a great threat to the public health. In this study, a bacterial strain LM-1, capable of utilizing BPA as the sole carbon and energy source under aerobic conditions, was originally isolated from an activated sludge sample. The isolate was identified as Pseudomonas sp. based on 16S rRNA gene sequence analysis. Strain LM-1 was able to completely degrade 25-100 mg/L BPA within 14-24 h, and it also exhibited high capacity for BPA degradation at a range of pH (6.0-8.0). (NH₄)₂SO₄ and NH₄NO₃ were the suitable nitrogen sources for its growth and BPA biodegradation, and the BPA degradation could be accelerated when exogenous carbon sources were introduced as the co-substrates. Metal ions such as Zn²⁺, Cu²⁺, and Ni²⁺ could considerably suppress the growth of strain LM-1 and BPA degradation. According to the analysis of liquid chromatography coupled to Q-Exactive high resolution mass spectrometry, hydroquinone, p-hydroxybenzaldehyde, and p-hydroxybenzoate were the predominate metabolites in the BPA biodegradation and the degradation pathways were proposed. This study is important for assessment of the fate of BPA in engineered and natural systems and possibly for designing bioremediation strategies.

Current progress in treatment technologies for plastic waste (bisphenol A) in aquatic environment: Occurrence, toxicity and remediation mechanisms

Bisphenol-A (BPA) is a type of endocrine disrupting compound (EDC) that is being widely used in the production of polycarbonate and epoxy resins. In the last few years, human exposure to BPA has been extensively high due to the continuous increment in the Annual Growth Rate (AGR) of the BPA global market. The presence and transportation of BPA in the environment could cause serious damage to aquatic life and human health. This paper reviewed the literature on the exposure and toxicity mechanisms of BPA and advanced analytical techniques for the detection of BPA in the environment and human beings. The study indicated that BPA can cause damaging effects on numerous tissues and organs, including the reproductive system, metabolic dysfunction, respiratory system, immune system and central nervous system. On the basis of reported studies on animals, it appears that the exposure of BPA can be carcinogenic and responsible for causing a variety of cancers like ovarian cancer, uterine cancer, prostate cancer, testicular cancer, and liver cancer. This review paper focused mainly on the current progress in BPA removal technologies within last ten years (2012-2022). This paper presents a comprehensive overview of individual removal technologies, including adsorption, photocatalysis/photodegradation, ozonation/advance oxidation, photo-fenton, membranes/nanofilters, and biodegradation, along with removal mechanisms. The extensive literature study shows that each technology has its own removal mechanism and their respective limitations in BPA treatment. In adsorption and membrane separation process, most of BPA has been treated by electrostatic interaction, hydrogen boning and π-π interations mechanism. Whereas in the degradation mechanism, O* and OH* species have played a major role in BPA removal. Some factors could alter the removal potential and efficiency of BPA removal. This review paper will provide a useful guide in providing directions for future investigation to address the problem of BPA-containing wastewater treatment.

Bacterial degradation of bisphenol analogues: an overview

Bisphenol A (BPA) is one of the most produced synthetic monomers in the world and is widespread in the environment. BPA was replaced by bisphenol analogues (BP) because of its adverse effects on life. Bacteria can degrade BPA and other bisphenol analogues (BP), diminishing their environmental concentrations. This study aimed to summarize the knowledge and contribute to future studies. In this review, we surveyed papers on bacterial degradation of twelve different bisphenol analogues published between 1987 and June 2022. A total of 102 original papers from PubMed and Google Scholar were selected for this review. Most of the studies (94.1%, n = 96) on bacterial degradation of bisphenol analogues focused on BPA, and then on bisphenol F (BPF), and bisphenol S (BPS). The number of studies on bacterial degradation of bisphenol analogues increased more than six times from 2000 (n = 2) to 2021 (n = 13). Indigenous microorganisms and the genera Sphingomonas, Sphingobium, and Cupriavidus could degrade several BP. However, few studies focussed on Cupriavidus. The acknowledgement of various aspects of BP bacterial biodegradation is vital for choosing the most suitable microorganisms for the bioremediation of a single BP or a mixture of BP.

Role of Nrf2 in bisphenol effects: a review study

Bisphenols (BPs), the main endocrine-disrupting chemicals used in polycarbonate plastics, epoxy-phenol resins, and some other manufacturers, have been interestingly focused to find their toxic effects in recent years. Due to the strong relation between bisphenols and some crucial receptors such as ERs, AR, glucocorticoid receptor, THRs, ERRs, hPXR, AhR, and etcetera, the disrupting and oncogenic role of these chemicals on reproductive, respiratory, and circulatory systems and a broad group of body tissues have been investigated. BPs induce oxidant enzymes, exert antioxidant enzymes from body cells, and result in the expression of proinflammatory genes, leading to cell apoptosis and inflammation. To maintain the homeostasis of human body cells, Nrf2, the key regulator of oxidative stress (Ashrafizadeh et al., 2020a; Ashrafizadeh et al., 2020c; Boroumand et al., 2018), confronts BP-induced ROS and RNS through the activation of antioxidant enzymes such as SOD1/2, CAT, GSH, GPX, HO-1, and etcetera. Chemicals and drugs such as LUT, NAC, GEN, L-NMMA, Ph₂Se₂, and GE can regulate the interactions between BPs and Nrf2. Despite the vital role of controlled levels of Nrf2 as an anti-inflammatory and antiapoptotic element, the uncontrolled activity of this transcription factor could lead to cell proliferation and tumorigenesis through NQO1, SLC7a11, Gclm, HMOX1, NQO1 gene activation, and some other genes. To avoid the excessive activity of Nrf2, some protein complexes like CUL3-RBX1-Keap1 (as the primary regulator), β-TrCP, and WDR23 regulate Nrf2's function. It is necessary to note that BPA, as the most famous member, is further reviewed due to its resemblance to the bisphenol family to each other.

Bisphenol B disrupts testis differentiation partly via the estrogen receptor-mediated pathway and subsequently causes testicular dysgenesis in Xenopus laevis

There is growing concern about adverse effects of bisphenol A alternatives including bisphenol B (BPB) due to their estrogenic activity. However, limited data are available concerning the influences of BPB on male reproductive development in vertebrates, especially in amphibians, which are believed to be susceptible to estrogenic chemicals. The present study investigated the effects of 10, 100 and 1000 nM BPB (2.42, 24.2 and 242 μg/L) on testis development in Xenopus laevis, a model amphibian species for studying gonadal feminization. We found that exposure to BPB from stages 45/46 to 52 resulted in down-regulation of testis-biased gene expression and up-regulation of ovary-biased gene and vitellogenin (vtgb1) expression in gonad-mesonephros complexes (GMCs) of tadpoles at stage 52, coupled with suppressed cell proliferation in testes and reduced gonadal metameres, resembling the effects of 17ß-estradiol. Moreover, an estrogen receptor (ER) antagonist ICI 182780 antagonized BPB-caused up-regulation of ovary-biased gene and vtgb1 expression to some degree, indicating that the effects of BPB on X. laevis testis differentiation could be partly mediated by ER. All observations demonstrate that early exposure to BPB inhibited testis differentiation and exerted certain feminizing effects during gonadal differentiation. When exposure was extended to post-metamorphosis, testes exhibited histological and morphological abnormalities including segmented, discontinuous and fragmented shapes, besides altered sex-dimorphic gene expression. Notably, most of BPB-caused alterations were not concentration-dependent, but the lowest concentration indeed exerted significant effects. Overall, our study for the first time reveals that low concentrations of BPB can disrupt testis differentiation partly due to its estrogenic activity and subsequently cause testicular dysgenesis after metamorphosis, highlighting its reproductive risk to amphibians and other vertebrates including humans. Our finding also implies that estrogenic chemicals-caused testis differentiation inhibition at tadpole stages could predict later testicular dysgenesis after metamorphosis, meaning a possibility of early detection of abnormal testis development caused by estrogenic chemicals.

Overlooked environmental risks deriving from aqueous transformation of bisphenol alternatives: Integration of chemical and toxicological insights

Owing to the widespread prevalence and ecotoxicity of bisphenol alternatives such as bisphenol S, bisphenol F, and bisphenol AF, the past decade has witnessed the publication of a remarkable number of studies related to their transformation and remediation in natural waters. However, the reactivity, removal efficiency, transformation products (TPs), and mechanisms of such emerging pollutants by different treatment processes have not been well elucidated. Particularly, the transformation-driven environmental risks have been mostly overlooked. Therefore, we present a review to address these issues from chemical and toxicological viewpoints. Four degradation systems can be largely classified as catalytic persulfate (PS) oxidation, non-catalytic oxidation, photolysis and photocatalysis, and biodegradation. It was found that bisphenol alternatives possess distinct reactivities with different oxidizing species, with the highest performance for hydroxyl radicals. All systems exhibit superior elimination efficiency for these compounds. The inadequate mineralization suggests the formation of recalcitrant TPs, from which the overall reaction pathways are proposed. The combined experimental and in silico analysis indicates that many TPs have developmental toxicity, endocrine-disrupting effects, and genotoxicity. Notably, catalytic PS systems and non-catalytic oxidation result in the formation of coupling products as well as halogenated TPs with higher acute and chronic toxicity and lower biodegradability than the parent compounds. In contrast, photolysis and photocatalysis generate hydroxylated and bond-cleavage TPs with less toxicity. Overall, this review highlights the secondary environmental risks from the transformation of bisphenol alternatives by conventional and emerging treatment processes. Finally, future perspectives are recommended to address the knowledge gaps of these contaminants in aquatic ecosystems.

A critical review of presence, removal and potential impacts of endocrine disruptors bisphenol A

Bisphenol A (BPA) is a synthetic organic compound that is mainly used in the production of polymer materials polycarbonate and epoxy resin. Widespread use and irregular processing methods have led to BPA being detected globally, raising concerns about its environmental and health effects. This review outlines an overview of the presence and removal of BPA in the environment and consumer products. We also summarized the endocrine-disrupting toxicity of BPA, and the relatively less summarized neurotoxicity, cytotoxicity, reproductive toxicity, genotoxicity, and carcinogenicity. Human exposure data show that humans have been exposed to low concentrations of BPA for a long time, future research should focus on the long-term exposure and the migration of BPA from consumer products to humans and the possible health risks associated with human exposure to BPA. Exploring economical and effective methods to reduce and remove BPA from the environment is imperative. The development of safe, functional and reproducible BPA analogs and the study of its degradation products can be the focus of subsequent research.

Ferrate(VI) oxidation of bisphenol E-Kinetics, removal performance, and dihydroxylation mechanism

Bisphenol E (bis (4-hydroxyphenyl) ethane, BPE), as a typical endocrine disrupting chemical, is commonly detected in source water and drinking water, which poses potential risks to human health and ecological environment. This paper investigated the removal of BPE by ferrate(VI) (Fe^VIO₄^2-, Fe(VI)) in water. Under the optimal condition of [Fe(VI)]₀:[BPE]₀ = 10:1 and pH = 8.0, a removal efficiency of 99% was achived in 180 s. Sixteen intermediates of BPE were detected, and four possible reaction pathways were proposed, which mainly involved the reaction modes of double-oxygen and single-oxygen transfer, bond breaking, carboxylation and polymerization. The double-oxygen transfer mechanism, different from traditional mechanisms, was newly proposed to illustrate the direct generation of di-hydroxylated products from parent BPE, which was demonstrated by theoretical calculations for its rationality. Significantly, NO₂^-, HCO₃^-, Cu²⁺, and humic acid, constituents of water promoted the removal of BPE. Additionally, samples from river, tap water, synthetic wastewater, and secondary effluent were tested to explore the feasibility of Fe(VI) oxidation for treating BPE in water. It was found that 99% of BPE was degraded within 300 s in these waters except for synthetic wastewater. The toxicity of BPE and its intermediates was evaluated by ECOSAR program, and the results showed that Fe(VI) oxidation decreased the toxicity of reaction solutions. These findings demonstrated that the Fe(VI) oxidation process was an efficient and green method for the treatment of BPE, and the new insights into the double-oxygen transfer mechanism aid to understand the reaction mechanisms of organic pollutants oxidized by Fe(VI).

Impregnation of Silver Nanoparticles onto Polymers Based on Sugarcane Bagasse for the Remediation of Endocrine Disruptor–Bisphenol A from Water

This present study introduces a contemporary innovation of synthesized polymer–silver nanoparticle nanocomposite adsorbent based on sugarcane bagasse (AgNP-SB-βCD) for the sequestration of emerging micropollutant–bisphenol A from water matrix. Batch adsorption mode was carried out to assess the effectiveness of AgNP-SB-βCD nanocomposites towards eliminating bisphenol A (BPA). Characterization techniques including SEM, FTIR, and XRD have confirmed the successful incorporation of silver nanoparticles (AgNPs) onto bagasse–polymer. At 25°C, pH 7, and contact time of 120 min, the nanocomposites had a maximum uptake capacity of 158.4 mg g-1on BPA. The equilibrium isotherm of BPA on AgNPs-SB-βCD has fitted effectively with Langmuir model while the adsorption kinetics conformed to pseudo-second order. The adsorption phenomenon was controlled mainly by physisorption (via host–guest inclusion van der Waals bonding and pore filling effect). In addition, oxidative degradation of BPA by AgNPs-SB-βCD could marginally contribute the removal of BPA due to oxidative dissolution of AgNPs at pH 7. The thermodynamic results substantiate the spontaneity and exothermic behaviors of the adsorption phenomenon. The polymeric nanocomposite adsorbent was regenerated five times (using 75% ethanol) without considerable loss of its adsorption capacity. This authenticates its reusability and consistency performances; accordingly, it can be a market competitor adsorbent for the treatment of water contaminated with BPA.

Biodegradation and photo-Fenton degradation of bisphenol A, bisphenol S and fluconazole in water

Bisphenol A, bisphenol S, and fluconazole are ubiquitous environmental pollutants and their removal from water is of utmost importance. As the biodegradation of these compounds is usually not enough effective, often other degradation methods are required. The study presents the difference between biodegradation and photo-Fenton degradation with a much higher efficiency obtained in the latter process. Levels of biodegradation and chemical degradation were assessed based on high-performance liquid chromatography determination. Optimization of the photo-Fenton removal of bisphenol A, bisphenol S, and fluconazole resulted in about 100 % primary degradation of both bisphenols during 10-20 min and almost 90 % primary degradation of fluconazole within an hour. Degradation products formed in the process were identified using liquid chromatography with mass spectrometry and showed central scission of bisphenol S with the formation of phenol and sulfuric acid while for bisphenol A and fluconazole the oxidation resulted in much smaller structural changes.

Adsorption performance of modified agricultural waste materials for removal of emerging micro-contaminant bisphenol A: A comprehensive review

This review is an attempt to assess the adsorption performance of different green adsorbents derived from agricultural waste materials (AWMs) that were used for the elimination of bisphenol A (BPA) from aqueous matrices. Different processes including grafting, polymerization, activation and chemical treatment have been applied to functionalize and modify agricultural waste materials for the purposes of increasing their adsorptive performances toward BPA. The highest reported adsorption capacity of adsorbent from agricultural waste for the uptake of BPA is the highly microporous carbon adsorbent derived from Argan nut shell (1408 mg g^-1). Hydrogen bonding, hydrophobic and π-π interactions were reported in most studies as the main mechanisms governing the adsorption of BPA onto agricultural waste adsorbents. Equilibrium isotherm and kinetic studies for the uptake of BPA onto agricultural waste adsorbents were best described by Langmuir/Freundlich model and pseudo-second order model, respectively. Despite the effective elimination of BPA by various agricultural waste adsorbents, an appropriate selection of elution solvent is important for effective desorption of BPA from spent adsorbent. To date, ethanol, diethyl ether-methanol, methanol-acetic acid, mineral acids and sodium hydroxide are the most eluents applied for desorption of BPA molecules loaded onto AW-adsorbents. Looking toward the future, studies on the agricultural waste adsorbents based on polymers, activated carbons, nanoparticles and highly microporous carbons should be mostly considered by the researchers toward removing BPA. These future studies should be performed both in laboratory, pilot and industrial scales, and also should report the sustainable techniques for disposal of the spent AW-adsorbents after lose their adsorption performance on BPA.

Influence of bisphenol A occurrence in wastewaters on biomass characteristics and activated sludge process performance

In this work, the influence of bisphenol A (BPA) on biological wastewater treatment was studied. For it, two sequencing batch reactors (SBRs) were operated for three months. Both SBRs were fed with synthetic wastewater (SW), adding 1 mg·L^-1 of BPA into the feed of reactor SBR-BPA, while the other one operated without BPA as a control reactor (SBR-B). In addition, batch experiments were performed with adapted and non-adapted activated sludge, simulating the reaction step of SBR-BPA, to determine the pathways for BPA removal. Results of batch experiments showed that adsorption and biodegradation were the only significant BPA removal routes. BPA removal by biodegradation was more efficient when adapted biomass was used in the tests (32.2% and 8.2% with adapted and non-adapted biomass, respectively), while BPA adsorption removal route was similar in both types of activated sludge (around 40%). Regarding the SBRs experiments, after 16 days no BPA concentration was detected in SBR-BPA effluent. In the adaptation process, SBR-BPA biomass was more sensitive to low temperatures resulting in higher effluent turbidity, COD and soluble microbial products concentrations than in SBR-B. However, once temperature increased, adapted biomass from SBR-BPA presented higher activity than SBR-B biomass, showing higher values of sludge production, microbial hydrolytic enzymatic activities and specific dynamic respiration rate. The bacterial community study revealed the increase of abundance of Proteobacteria (especially Thiothrix species) and Actinobacteria (especially Nocardioides species) phyla at the expense of Bacteroidetes and Chloroflexi phyla in SBR-BPA during its operation.

Toxic effect of fluorene-9-bisphenol to green algae Chlorella vulgaris and its metabolic fate

Fluorene-9-bisphenol (BHPF), a bisphenol A (BPA) alternative, has recently attracted attention due to its wide use and potential toxicity. However, the toxic effects and fate of BHPF in freshwater algae remains to be elucidated. In this study, the impact of BHPF on Chlorella vulgaris was explored and the removal and bioaccumulation of BHPF by Chlorella vulgaris were investigated. Results showed that C. vulgaris was sensitive to BHPF at the concentration of >1 mg L-1, and lipid peroxidation was significantly increased under the exposure of >0.1 mg BHPF L-1. An oxidative stress was caused by BHPF, as the activities of superoxide dismutase (SOD) were significantly decreased in algal cells by >0.5 mg BHPF L-1. The removal rate of BHPF was significantly enhanced by the addition of algae. In addition, the increasing accumulation of BHPF in algae at concentrations ranging from 0.5 to 5 mg L-1 was observed and may contribute for the increased toxicity of BHPF to C. vulgaris. Ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) results demonstrated that three metabolites of BHPF were identified in algal cells, which may pose an unexpected effect in aquatic environment.

Multigenerational study of the obesogen effects of bisphenol S after a perinatal exposure in C57BL6/J mice fed a high fat diet

BACKGROUND

Bisphenol S is an endocrine disruptor exhibiting metabolic disturbances, especially following perinatal exposures. To date, no data are available on the obesogen effects of BPS in a mutligenerational issue.

OBJECTIVES

We investigated obesogen effects of BPS in a multigenerational study by focusing on body weight, adipose tissue and plasma parameters in male and female mice.

METHODS

Pregnant C57BL6/J mice were exposed to BPS (1.5 μg/kg bw/day ie a human equivalent dose of 0.12 μg/kg bw/day) by drinking water from gestational day 0 to post natal day 21. All offsprings were fed with a high fat diet during 15 weeks. Body weight was monitored weekly and fat mass was measured before euthanasia. At euthanasia, blood glucose, insuline, triglyceride, cholesterol and no esterified fatty acid plasma levels were determined and gene expressions in visceral adipose tissue were assessed. F1 males and females were mated to obtain the F2 generation. Likewise, the F2 mice were cross-bred to obtain F3. The same analyses were performed.

RESULTS

In F1 BPS induced an overweight in male mice associated to lipolysis gene expressions upregulation. In F1 females, dyslipidemia was observed. In F2, BPS exposure was associated to an increase in body weight, fat and VAT masses in males and females. Several plasma parameters were increased but with a sex related pattern (blood glucose, triglycerides and cholesterol in males and NEFA in females). We observed a down-regulation in mRNA expression of gene involved in lipogenesis and in lipolysis for females but only in the lipogenesis for males. In F3, a decrease in VAT mass and an upregulation of lipogenesis gene expression occurred only in females.

CONCLUSIONS

BPS perinatal exposure induced sex-dependent obesogen multigenerational effects, the F2 generation being the most impacted. Transgenerational disturbances persisted only in females.

The presence of bisphenol A in the thermal paper in the face of changing European regulations - A comparative global research

Bisphenol A (BPA) is used as a color developer in a thermal paper that after a heating process reacts with a leuco dye and changes it to a colored form. Receipts from cash registers are considered as the main source of consumer exposure to bisphenols together with polycarbonates and epoxy resins. Levels of BPA and its possible alternatives were determined in thermal paper samples collected between May 2018 and May 2019 in 22 European and 17 non-European countries on all inhabited continents (220 samples in total, 133 of which were from Europe and 87 from other countries). These measurements were intended to check the level of BPA presence in receipts originating from different countries, especially from Europe in the light of changing regulations restricting its use. The effect of thermal printing on developer content was also analyzed, but no major changes in concentrations of bisphenols were observed during the process. Thus, printed receipts could be used for the determination of bisphenol content. Analysis of receipts from 39 countries has shown that BPA is still the most common compound used around the world with 69% samples containing this color developer. Among other tested bisphenols, BPS was used as a color developer in 20% samples, but it was noted that all samples collected from Japan and the United States of America were found to contain only BPS. Other bisphenols (F, AF, E, and B) considered as possible alternatives for BPA were detected only at trace levels or not detected at all, which showed that they were not used as color developers. The relatively large use of BPS as a BPA substitute is worrying because this compound not only has similar endocrine properties but is also poorly biodegradable. Besides, its relatively high polarity facilitates spreading in the environment.