Screening and evaluation of biosurfactant-producing strains isolated from oilfield wastewater

Production, characterization, and application of Pseudoxanthomonas taiwanensis biosurfactant: a green chemical for microbial enhanced oil recovery (MEOR)

Biosurfactants, as microbial bioproducts, have significant potential in the field of microbial enhanced oil recovery (MEOR). Biosurfactants are microbial bioproducts with the potential to reduce the interfacial tension (IFT) between crude oil and water, thus enhancing oil recovery. This study aims to investigate the production and characterization of biosurfactants and evaluate their effectiveness in increasing oil recovery. Pseudoxanthomonas taiwanensis was cultured on SMSS medium to produce biosurfactants. Crude oil was found to be the most effective carbon source for biosurfactant production. The biosurfactants exhibited comparable activity to sodium dodecyl sulfate (SDS) at a concentration of 400 ppm in reducing IFT. It was characterized as glycolipids, showing stability in emulsions at high temperatures (up to 120 °C), pH levels ranging from 3 to 9, and NaCl concentrations up to 10% (w/v). Response surface methodology revealed the optimized conditions for the most stable biosurfactants (pH 7, temperature of 40 °C, and salinity of 2%), resulting in an EI24 value of 64.45%. Experimental evaluations included sand pack column and core flooding studies, which demonstrated additional oil recovery of 36.04% and 12.92%, respectively. These results indicate the potential application of P. taiwanensis biosurfactants as sustainable and environmentally friendly approaches to enhance oil recovery in MEOR processes.

Biodegradation of carbofuran by Pseudomonas aeruginosa S07: biosurfactant production, plant growth promotion, and metal tolerance

Pesticides are an indispensable part of modern farming as it aids in controlling pests and hence increase crop yield. But, unmanaged use of pesticides is a growing concern for safety and conservation of the environment. In the present study, a novel biosurfactant-producing bacterium, Pseudomonas aeruginosa S07, was utilized to degrade carbofuran pesticide, and it was obtained at 150 mg/L concentration; 89.2% degradation was achieved on the 5th day of incubation in in vitro culture condition. GC-MS (gas chromatography and mass spectrometry) and LC-MS (liquid chromatography and mass spectrometry) analyses revealed the presence of several degradation intermediates such as hydroxycarbofurnan, ketocarbofuran, and hydroxybenzofuran, in the degradation process. The bacterium was found to exhibit tolerance towards several heavy metals: Cu, Co, Zn, Ni, and Cd, where maximum and least tolerance were obtained against Co and Ni, respectively. Additionally, the bacterium also possesses plant growth-promoting activity showing positive results in nitrogen fixation, phosphate solubilising, ammonia production, and potassium solubilizing assays. Thus, from the study, it can be assumed that the bacterium can be useful in the production of bioformulation for remediation and rejuvenation of pesticide-contaminated sites in the coming days.

Characterization of the Thermostable Biosurfactant Produced by Burkholderia thailandensis DSM 13276

Biosurfactants synthesized by microorganisms represent safe and sustainable alternatives to the use of synthetic surfactants, due to their lower toxicity, better biodegradability and biocompatibility, and their production from low-cost feedstocks. In line with this, the present study describes the physical, chemical, and functional characterization of the biopolymer secreted by the bacterium Burkholderia thailandensis DSM 13276, envisaging its validation as a biosurfactant. The biopolymer was found to be a glycolipopeptide with carbohydrate and protein contents of 33.1 ± 6.4% and 23.0 ± 3.2%, respectively. Galactose, glucose, rhamnose, mannose, and glucuronic acid were detected in the carbohydrate moiety at a relative molar ratio of 4:3:2:2:1. It is a high-molecular-weight biopolymer (1.0 × 107 Da) with low polydispersity (1.66), and forms aqueous solutions with shear-thinning behavior, which remained after autoclaving. The biopolymer has demonstrated a good emulsion-stabilizing capacity towards different hydrophobic compounds, namely, benzene, almond oil, and sunflower oil. The emulsions prepared with the biosurfactant, as well as with its autoclaved solution, displayed high emulsification activity (>90% and ~50%, respectively). Moreover, the almond and sunflower oil emulsions stabilized with the biosurfactant were stable for up to 4 weeks, which further supports the potential of this novel biopolymer for utilization as a natural bioemulsifier.

Optimization of Decoloration Conditions of Methylene Blue Wastewater by Penicillium P1

The objective of this work was to optimize the decolorization of methylene blue dye wastewater by Penicillium P1. The influencing factors included initial methylene blue concentration, initial pH value, salinity and inoculation percentage of penicillium spores. The decolorization rate was optimized by response surface center composite design methods. The optimal optimization condition was methylene blue concentration 50 mg/L, pH value 3.61, salinity 3.7%, and inoculation percentage 3.21% (When the MSM was 100 ml), the predicted decolorization rate of methylene blue 85%. The UV and the FTIR spectrum analysis showed that the structure of methylene blue changed during the process of decolorization of methylene blue by Penicillium P1.

Bioprocesses for the recovery of bioenergy and value-added products from wastewater: A review

Wastewater and activated sludge present a major challenge worldwide. Wastewater generated from large and small-scale industries, laundries, human residential areas and other sources is emerging as a main problem in sanitation and maintenance of smart/green cities. During the last decade, different technologies and processes have been developed to recycle and purify the wastewater. Currently, identification and fundamental consideration of development of more advanced microbial-based technologies that enable wastewater treatment and simultaneous resource recovery to produce bioenergy, biofuels and other value-added compounds (organic acids, fatty acids, bioplastics, bio-pesticides, bio-surfactants and bio-flocculants etc.) became an emerging topic. In the last several decades, significant development of bioprocesses and techniques for the extraction and recovery of mentioned valuable molecules and compounds from wastewater, waste biomass or sludge has been made. This review presents different microbial-based process routes related to resource recovery and wastewater application for the production of value-added products and bioenergy. Current process limitations and insights for future research to promote more efficient and sustainable routes for this under-utilized and continually growing waste stream are also discussed.

Dark septate endophytes (DSE): potential bioremedial promoters of oil derivatives

Oil spills are a global environmental problem. One of the management tools used to solve this problem is phytoremediation, a process that uses the capacity of plants and microorganisms to metabolize the components of the oil. The aims of the present study were to isolate, identify and characterize the fungi obtained from plants growing in an oil-contaminated area and evaluate their growth response and emulsifying and degrading capacity in two petroleum derivatives (kerosene and lube oil). Four dark septate endophytes (DSE) strains were isolated and identified: Exserohilum pedicellatum, Ophiosphaerella sp., and two Alternaria alternata strains. E. pedicellatum was found in an oil-contaminated environment for the first time. All strains were grown in kerosene, although some showed inhibition, whereas in lube oil, all showed growth induction. Ophiosphaerella sp. showed "drops" in kerosene, but the four strains showed surfactant capacity in lube oil. Ophiosphaerella sp. showed the highest emulsifying activity index but both A. alternata strains presented the highest lube oil degradation, which was directly related to the weight of the fungal biomass. There was not relationship between emulsifying capacity and oil degradation. However, these fungi show technological potential for application in phytoremediation processes.

Biosurfactant Production Using Mutant Strains of Pseudomonas aeruginosa and Bacillus subtilis from Agro-industrial Wastes

Purpose: Biosurfactants are applied in drug formulations to improve drug solubility and in some cases, treat diseases. This study is focused on generating, extracting, purifying and then characterizing biosurfactants from bacterial isolates of palm oil wastes and abattoir soil origins. Methods: Eight bacteria were isolated from the soil and sludge samples, out of which four (50%) were found to produce biosurfactants. Bacillus subtilis (37.5%) and Pseudomonas aeruginosa (50%) were isolated and identified from these samples using mineral salt medium, nutrient agar and Cetrimide agar. Mutant isolates of B. subtilis BS3 and P. aeruginosa PS2 were used to produce biosurfactants using mineral salt medium as enrichment medium and extraction was done using membrane filter. Results: The mutant strains B. subtilis BS3 and P. aeruginosa PS2 generated biosurfactants that displayed significant solubility and dissolution properties by enhancing the percentage solubility of piroxicam to 62.86 and 54.29% respectively, and achieved 51.71 and 48.71% dissolution of the drug in 0.1N HCl. Conclusion: From the results obtained, the produced biosurfactants could serve as a better alternative to conventional surfactants. Notably, the study indicated that the biosurfactant produced by mutant strain of B. subtilis produced more potent activities (surface tension reduction ability, high emulsification) than those of P. aeruginosa.

Preparation of a Gemini Surfactant from Mixed Fatty Acid and its Use in Cosmetics

Among the surfactants, dimeric surfactants represent a niche group with multifunctional properties. In this work a modified gemini surfactant was synthesized using symmetrical fatty acids. Due to the spacers used to combine the two symmetrical monomers, the synthesized gemini surfactant is cationic. The structure of the compound was confirmed with 1H-NMR. The most advantageous property of the gemini surfactant is that it has a lower surface tension, i. e. less than 35 mNm–1 at 25°C, compared to monomeric surfactants. The surface tension was determined with a Kyowa tensiometer. The CMC (critical micelle formation concentration) was calculated according to the pyrene method and detected by UV spectroscopy at 25°C. The very low CMC is another market advantage of the gemini surfactant. Hydrophobicity and hydrophilicity of the synthesized compound were checked by the emulsification method. The ability of the synthesized gemini surfactant to wet and foam and the emulsification index at different pH values were tested. Based on the results, the gemini surfactant was used in formulations for hair and skin care. Conditioners and creams were prepared with the synthesized compound and the properties were analyzed at different concentrations of the gemini surfactant in the respective formulation.

Improving bioremediation process of petroleum wastewater using biosurfactants producing Stenotrophomonas sp. S1VKR-26 and assessment of phytotoxicity

Primarily, this study aims to evaluate the biosurfactant production capability of Stenotrophomonas sp. S1VKR-26, profiling of its bioremediation ability to remediate petroleum refinery wastewater in a lab-scale bioreactor and assessment of phytotoxicity of bioremediated petroleum wastewater. As a result, strain S1VKR-26 was found to produce 5.15 g L^-1 biosurfactant, CMC of 30 mg L^-1 and reduced the surface tension from 60.3 to 30.5 mN m^-1. Different PAHs like naphthalene (93%), phenanthrene (86%), fluoranthene (92%), and pyrene (98.3%), total petroleum hydrocarbons (72.33%) and phenolic compounds (93.06%) were significantly remediated from the wastewater after the treatment of strain S1VKR-26. Moreover, S1VKR-26 strain treated 1:1 diluted petroleum wastewater have higher germination (100%), vigor (486), and seedling (4.86 cm) compared to untreated wastewater. Therefore, the treatment of petroleum refinery wastewater with strain S1VKR-26 could be more effective in the sense of environmental safety and irrigation for crop production in agriculture.

Optimization of Cr6+ Removal by Bacillus subtilis Strain SZMC 6179J from Chromium-Containing Soil

The removal rate of Cr⁶⁺ has been explored by the optimized removal conditions. Five Cr-resistant strains were isolated from chromium-contained soil. The most efficient strain S1 was identified as Bacillus subtilis strain SZMC 6179J through 16S rDNA. Response surface methodology (RSM) was used to investigate the effects of four independent variables, including initial pH, initial Cr⁶⁺ concentration (mg/L), time (h) and inoculation percentage (%). RSM revealed that when pH was 5.02, time was 24.0 h, inoculation percentage was 4.64% (v/v) and initial concentration of Cr⁶⁺ was 55.0 mg/L, the optimal condition was obtained. Under the optimum conditions, the actual response values for Bacillus subtilis strain SZMC 6179J was 93.50%. The pH was the most significant factor towards removal rate of Cr⁶⁺. The result showed that the removal mechanism of Cr⁶⁺ by Bacillus subtilis strain SZMC 6179J was reduction under normal conditions. The removal mechanism of Cr⁶⁺ by Bacillus subtilis strain SZMC 6179J was adsorption under adverse conditions.

Modulation of agriculturally useful rhamnolipid profile of Pseudomonas sp. K6 due to the supplementation with chitosan and gold nanoparticles

As rhizobacteria have extensively been studied for the production of compounds with biocontrol properties, methods to enhance its production are very important. In this study, nanotechnological method to modulate the rhamnolipid production by Pseudomonas sp. K6 has been demonstrated. For this, Pseudomonas sp. K6 was cultured with different concentrations of chitosan nanoparticles (CNPs) and gold nanoparticles (AuNPs). The rhamnolipid production was further analyzed by CTAB- methylene blue agar assay and also by LC-MS/MS analysis. From the LC-MS/MS result, induction of dirhamnolipid production in K6 could be confirmed when cultured with CNPs (1, 5 and 10 mg/mL) and AuNPs (10, 25, 50 and 100 µg/mL). The monorhamnolipid production by K6 was observed to get enhanced when the K6 culture was supplemented with 2.5 mg/mL CNPs and 10 µg/mL AuNPs. Also, in planta study confirmed the biocontrol ability of rhamnolipid as it suppressed the Sclerotium rolfsii infection in Vigna unguiculata plants. As the rhamnolipids have versatile applications in the agricultural field, the nano-based approach to enhance its production from the biocontrol organism is significant.

A newly isolated strain of Serratia sp. from an oil spillage site of Assam shows excellent bioremediation potential

A hydrocarbon-degrading strain was isolated from a petroleum oil-contaminated site which was identified on the basis of 16S rDNA gene sequencing as a member of the genus Serratia. The isolate reduced surface tension of petroleum oil supplemented medium by 48.35% with respect to control after 7 days of treatment. Fluorescence microscopy revealed that its chemotaxis was towards hydrocarbon. The isolate degraded 87.54 and 85.48% of diesel and kerosene in liquid culture, respectively, after 28 day incubation at 37 ± 2 °C. The ex situ pilot scale bioremediation experiment in which artificially contaminated soil (10 and 20% v/w kerosene) was treated for 7 days showed a germination rate of Vigna radiate seeds of 52% and 72%, respectively. Interestingly, a germination rate of 31% was obtained with the heavily contaminated soil samples collected from the oil spillage site after 20 days of bioremediation treatment. The presence of υ_CH3 (asymmetric stretching), υ_C=C (stretch), and υ_C-C (stretch) in the crude biosurfactant produced by the isolate was revealed by FTIR analysis, and emulsification index (E ₂₄) was found 60 and 56.6%, respectively, against diesel and kerosene oil. The non-cytotoxicity nature of the biosurfactant also supports its potential application in field trial.

Sustainable biosurfactant produced by Serratia marcescens UCP 1549 and its suitability for agricultural and marine bioremediation applications

BACKGROUND

Biosurfactants are surface-active agents produced by microorganisms that have higher efficiency and stability, lower toxicity and higher biocompatibility and biodegradability than chemical surfactants. Despite its properties and potential application in a wide range of environmental and industrial processes, biosurfactants are still not cost-competitive when compared to their synthetic counterparts. Cost effective technologies and renewable raw substrates as agro-industrial and regional waste from northeast of Brazil as cassava flour wastewater, supplemented with lactose and corn oil are mainly the chemically media for growing microorganism and in turn the production of the biosurfactant of quality. This study aimed to obtained biosurfactant by Serratia marcescens UCP 1549 containing cassava flour wastewater (CWW), by application of a full-factorial design, as sustainable practices in puts the production process in promising formulation medium. The characterization of the biomolecule was carried out, as well as the determination of its stability and toxicity for cabbage seeds. In addition, its ability to stimulate seed germination for agriculture application and oil spill bioremediation were investigated.

RESULTS

Serratia marcescens showed higher reduction of surface tension (25.92 mN/m) in the new medium containing 0.2% lactose, 6% cassava flour wastewater and 5% corn waste oil, after 72 h of fermentation at 28 °C and 150 rpm. The substrate cassava flour wastewater showed a promising source of nutrients for biosurfactant production. The isolate biosurfactant exhibited a CMC of 1.5% (w/v) and showed an anionic and polymeric structure, confirmed by infrared spectra. The biomolecule demonstrated high stability under different temperatures, salinity and pH values and non-toxicity against to cabbage seeds. Thus, exploring biosurfactant their potential role in seeds germinations and the promotion and agricultural applications was investigated. In addition, the effectiveness of biosurfactant for removal burned motor oil adsorbed in sand was verified.

CONCLUSIONS

The use of medium containing CWW not only reduces the cost of process of biosurfactant production, but also the environmental pollution due to the inappropriate disposal of this residue. This fact, added to the high stability and non-toxicity of the biosurfactant produced by S. marcescens UCP 1549, confirms its high environmental compatibility, make it a sustainable biocompound that can be replace chemical surfactants in diverse industries. In addition, the effectiveness of biosurfactant for stimulate seed germination and removing burned motor oil from sand, suggests its suitability for agriculture and bioremediation applications.

Isolation and characterization of biosurfactant producing and oil degrading Bacillus subtilis MG495086 from formation water of Assam oil reservoir and its suitability for enhanced oil recovery

The strains isolated from the formation water were characterized and screened considering their crude oil degradation capability and biosurfactant production ability. The growth kinetics study of isolated Bacillus subtilis MG495086 was carried out by varying growth parameters i.e. carbon source, temperature, pH and salinity. The biosurfactant production was optimized adopting RSM-CCD considering carbon source (1-5%), pH (3-11) and temperature (25-65 °C) as matrix parameters. The optimum biosurfactant production (6.3 ± 0.1 g/L) and the minimum surface tension 29.85 mN/m were obtained after 96 h of incubation under optimal conditions i.e. 3.8% (v/v) of light-paraffin oil as sole carbon source at 62.4 °C and pH 7.7 with the maximum oil degradation capability of 91.3 ± 5%. Critical micelle concentration value of crude biosurfactant was found to be 40 mg/L with high emulsification activity of 72.45 ± 0.85%. The produced biosurfactant was identified as lipopeptide (Surfactin) and characterized using various analytical techniques to establish its suitability for microbial enhanced oil recovery.

Culture Medium Development for Microbial-Derived Surfactants Production-An Overview

Surfactants are compounds that can reduce the surface tension between two different phases or the interfacial tension of the liquid between water and oil, possessing both hydrophilic and hydrophobic moieties. Biosurfactants have traits that have proven to be advantageous over synthetic surfactants, but these compounds do not compete economically with synthetic surfactants. Different alternatives increase the yield of biosurfactants; development of an economical production process and the usage of cheaper substrates during process have been employed. One of the solutions relies on the suitable formulation of a production medium by including alternative raw materials sourced from agro-wastes, hydrocarbons, or by-products of a process might help in boosting the biosurfactant production. Since the nutritional factors required will be different among microorganisms, the establishment of a suitable formulation for biosurfactant production will be challenging. The present review describes various nutrients and elements considered in the formulation of a production medium with an approach focusing on the macronutrient (carbon, nitrogen source, and C/N ratio), minerals, vitamins, metabolic regulators, and salinity levels which may aid in the study of biosurfactant production in the future.

Microbial rhamnolipid production: a critical re-evaluation of published data and suggested future publication criteria

High production cost and potential pathogenicity of Pseudomonas aeruginosa, commonly used for rhamnolipid synthesis, have led to extensive research for safer producing strains and cost-effective production methods. This has resulted in numerous research publications claiming new non-pathogenic producing strains and novel production techniques many of which are unfortunately without proper characterisation of product and/or producing strain/s. Genes responsible for rhamnolipid production have only been confirmed in P. aeruginosa, Burkholderia thailandensis and Burkholderia pseudomallei. Comparing yields in different publications is also generally unreliable especially when different methodologies were used for rhamnolipid quantification. After reviewing the literature in this area, we strongly feel that numerous research outputs have insufficient evidence to support claims of rhamnolipid-producing strains and/or yields. We therefore recommend that standards should be set for reporting new rhamnolipid-producing strains and production yields. These should include (1) molecular and bioinformatic tools to fully characterise new microbial isolates and confirm the presence of the rhamnolipid rhl genes for all bacterial strains, (2) using gravimetric methods to quantify crude yields and (3) use of a calibrated method (high-performance liquid chromatography or ultra-performance liquid chromatography) for absolute quantitative yield determination.

Current status in biotechnological production and applications of glycolipid biosurfactants

Biosurfactants are natural compounds with surface activity and emulsifying properties produced by several types of microorganisms and have been considered an interesting alternative to synthetic surfactants. Glycolipids are promising biosurfactants, due to low toxicity, biodegradability, and chemical stability in different conditions and also because they have many biological activities, allowing wide applications in different fields. In this review, we addressed general information about families of glycolipids, rhamnolipids, sophorolipids, mannosylerythritol lipids, and trehalose lipids, describing their chemical and surface characteristics, recent studies using alternative substrates, and new strategies to improve of production, beyond their specificities. We focus in providing recent developments and trends in biotechnological process and medical and industrial applications.

Antibiofilm activity of biosurfactant producing coral associated bacteria isolated from gulf of mannar

Coral Associated Bacteria (CAB) (N = 22) isolated from the mucus of the coral Acropora digitifera were screened for biosurfactants using classical screening methods; hemolysis test, lipase production, oil displacement, drop collapse test and emulsifying activity. Six CAB (U7, U9, U10, U13, U14, and U16) were found to produce biosurfactants and were identified by 16S ribosomal RNA gene sequencing as Providencia rettgeri, Psychrobacter sp., Bacillus flexus, Bacillus anthracis, Psychrobacter sp., and Bacillus pumilus respectively. Their cell surface hydrophobicity was determined by Microbial adhesion to hydrocarbon assay and the biosurfactants produced were extracted and characterized by Fourier Transform Infrared spectroscopy. Since the biosurfactants are known for their surface modifying capabilities, antibiofilm activity of positive isolates was evaluated against biofilm forming Pseudomonas aeruginosa ATCC10145. Stability of the active principle exhibiting antibiofilm activity was tested through various temperature treatments ranging from 60 to 100 °C and Proteinase K treatment. CAB isolates U7 and U9 exhibited stable antibiofilm activity even after exposure to higher temperatures which is promising for the development of novel antifouling agents for diverse industrial applications. Further, this is the first report on biosurfactant production by a coral symbiont.

Microbial treatment for prevention and removal of paraffin deposition on the walls of crude pipelines

Two bacterial strains, paraffin removal strain and biosurfactant-producing strain, named BHJ-1 and QFL-1, were isolated from oil production wells in Daqing oilfield of China. They were subsequently identified as Bacillus cereus QAU68 and Bacillus subtilis XCCX, respectively. As an indicator of the degradation paraffin, the inoculum concentration of BHJ-1 and QFL-1 were added in different proportions, the optimum proportion was 5:2. In this proportion the degradation rate of paraffin could reach 64 %, the prevention rate of paraffin could reach 55 %.