Ecobiotechnological Approach for Exploiting the Abilities of Bacillus to Produce Co-polymer of Polyhydroxyalkanoate

Polyhydroxy butyrate biosynthesis by Azotobacter chroococcum MTCC 3858 through groundnut shell as lignocellulosic feedstock using resource surface methodology

This work appraises the prospect of utilising groundnut shell hydrolysate as a feedstock used for PHB biosynthesis by Azotobacter chroococcum MTCC 3853 under SMF conditions. Sugar reduction: untreated and pretreated 20% H₂SO₄ (39.46 g/l and 62.96 g/l, respectively), untreated and enzymatic hydrolysis (142.35 mg/g and 568.94 mg/g). The RSM-CCD optimization method was used to generate augment PHB biosynthesis from groundnut shell hydrolysate (30 g/l), ammonium sulphate (1.5 g/l), ammonium chloride (1.5 g/l), peptone (1.5 g/l), pH 7, 30 °C, and a 48 h incubation time. The most convincing factors (p < 0.0001), coefficient R² values of biomass 0.9110 and PHB yield 0.9261, PHB production, highest biomass (17.23 g/l), PHB Yield(11.46 g/l), and 66.51 (wt% DCW) values were recorded. The control (untreated GN) PHB yield value of 2.86 g/l increased up to fourfold in pretreated GN. TGA results in a melting range in the peak perceived at 270.55 °C and a DSC peak range of 172.17 °C, correspondingly. According to the results, it furnishes an efficient agricultural waste executive approach by diminishing the production expenditure. It reinforces the production of PHB, thereby shrinking our reliance on fossil fuel-based plastics.

Exploiting Polyhydroxyalkanoates for Biomedical Applications

Polyhydroxyalkanoates (PHA) are biodegradable plastic. Numerous bacteria produce PHAs under environmental stress conditions, such as excess carbon-rich organic matter and limitations of other nutritional elements such as potassium, magnesium, oxygen, phosphorus, and nitrogen. In addition to having physicochemical properties similar to fossil-fuel-based plastics, PHAs have unique features that make them ideal for medical devices, such as easy sterilization without damaging the material itself and easy dissolution following use. PHAs can replace traditional plastic materials used in the biomedical sector. PHAs can be used in a variety of biomedical applications, including medical devices, implants, drug delivery devices, wound dressings, artificial ligaments and tendons, and bone grafts. Unlike plastics, PHAs are not manufactured from petroleum products or fossil fuels and are, therefore, environment-friendly. In this review, a recent overview of applications of PHAs with special emphasis on biomedical sectors, including drug delivery, wound healing, tissue engineering, and biocontrols, are discussed.

Cost effective media optimization for PHB production by Bacillus badius MTCC 13004 using the statistical approach

Polyhydroxybutyrate (PHB) has significant potential for replacing non-biodegradable traditional plastic, which is responsible for several global environmental issues. The main problem with switching to bio-based alternatives for petrochemical plastics is the large price gap on the market. To overcome this problem, the present research was focused on the utilization of inexpensive substrates i.e. agricultural residues for cost-effective PHB production by endospore-forming bacteria Bacillus badius MTCC 13004. For efficient PHB production, Box-Behnken Design (BBD) was selected for media optimization and to observe the interactive effects of four variables i.e. pH, Na acetate, Banana peel, and mustard cake. PHB yield of 2.11 g/L was attained under optimized conditions compared to non-optimized conditions (0.72 g/L). FTIR spectra analysis of PHB extracted from Bacillus badius was found to be similar to commercial PHB. NMR data was also matched with the chemical shift signals CH, CH₂, and CH₃ of PHB. The melting temperature (Tm) and glass transition temperature (Tg) of PHB from Bacillus badius was found to be 165.14 and 2.68 °C, respectively. Further, PCR protocol was also designed to amplify key enzymes of the PHB synthesis pathway i.e. PHB synthase (phb C gene).

Plastic Eating Enzymes: A Step Towards Sustainability

The large-scale usage of petro-chemical-based plastics has proved to be a significant source of environmental pollution due to their non-biodegradable nature. Microbes-based enzymes such as esterases, cutinases, and lipases have shown the ability to degrade synthetic plastic. However, the degradation of plastics by enzymes is primarily limited by the unavailability of a robust enzymatic system, i.e., low activity and stability towards plastic degradation. Recently, the machine learning strategy involved structure-based and deep neural networks show desirable potential to generate functional, active stable, and tolerant polyethylene terephthalate (PET) degrading enzyme (FAST-PETase). FAST-PETase showed the highest PET hydrolytic activity among known enzymes or their variants and degraded broad ranges of plastics. The development of a closed-loop circular economy-based system of plastic degradation to monomers by FAST-PETase followed by the re-polymerization of monomers into clean plastics can be a more sustainable approach. As an alternative to synthetic plastics, diverse microbes can produce polyhydroxyalkanoates, and their degradation by microbes has been well-established. This article discusses recent updates in the enzymatic degradation of plastics for sustainable development.

Geobacillus thermoleovorans MTCC 13131: An Amide-Hydrolyzing Thermophilic Bacterium Isolated from a Hot Spring of Manikaran

Geobacillus thermoleovorans MTCC 13131, an amide hydrolyzing bacteria was isolated from a hot spring in Himachal Pradesh and identified through 16S rRNA gene sequence analysis. The amidase derived from this bacterium exhibited hydrolyzing catalytic ability against aliphatic and aromatic amides. The isolate was characterized for morphological and biochemical properties. Further, the production of amidase enzyme from this isolate was evaluated using approach of one-variable-at-a-time and response surface method. The Response Surface Methodology based study indicated the importance of nitrogen sources and growth period for amidase production. Optimal production was achieved at a temperature 55 °C, and production pH 7.5 in the production medium comprising diammonium hydrogen phosphate (0.4%), peptone (0.45%) and yeast extract (0.3%). The wide substrate affinity of the strain suggests its potential role in biotransformation of amides to corresponding acids of industrial significance along with its strong capacity to degrade the toxic amide in polluted environmental samples.

Supplementary Information

The online version contains supplementary material available at 10.1007/s12088-022-01042-9.

Exploitation of wasted bread as substrate for polyhydroxyalkanoates production through the use of Haloferax mediterranei and seawater

The use of the halophile microorganism Haloferax mediterranei, able to synthesize poly(hydroxybutyrate-hydroxyvalerate) (PHBV), is considered as a promising tool for the industrial production of bioplastic through bioprocessing. A consistent supplementation of the growth substrate in carbohydrates and minerals is overall necessary to allow its PHBV production. In this work, wasted bread was used as substrate for bioplastic production by microbial fermentation. Instead of the consistent and expensive minerals supplement required for Hfx. mediterranei DSM1411 growth, microfiltered seawater was added to the wasted bread-derived substrate. The suitable ratio of wasted bread homogenate and seawater, corresponding to 40:60, was selected. The addition of proteases and amylase to the bread homogenate promoted the microbial growth but it did not correspond to the increase of bioplastic production by the microorganism, that reach, under the experimental conditions, 1.53 g/L. An extraction procedure of the PHBV from cells, based on repeated washing with water, followed or not by a purification through ethanol precipitation, was applied instead of the conventional extraction with chloroform. Yield of PHBV obtained using the different extraction methods were 21.6 ± 3.6 (standard extraction/purification procedure with CHCl3:H2O mixture), 24.8 ± 3.0 (water-based extraction), and 19.8 ± 3.3 mg PHAs/g of wasted bread (water-based extraction followed by ethanol purification). Slightly higher hydroxyvalerate content (12.95 vs 10.78%, w/w) was found in PHBV obtained through the water-based extraction compared to the conventional one, moreover, the former was characterized by purity of 100% (w/w). Results demonstrated the suitability of wasted bread, supplemented with seawater, to be used as substrate for bioplastic production through fermentation. Results moreover demonstrated that a solvent-free extraction, exclusively based on osmotic shock, could be used to recover the bioplastic from cells.

Isolation and Characterization of Human Intestinal Bacteria Cytobacillus oceanisediminis NB2 for Probiotic Potential

Systemic characterization of the human gut microbiota highlighted its vast therapeutic potential. Despite having enormous potential, the non-availability of their culture representatives created a bottleneck to understand the concept of microbiome-based therapeutics. The present study is aimed to isolate and evaluate the probiotic potential of a human gut isolate. Physiochemical, morphological, and phylogenetic characterization of a human gut isolate identifies it as a rod-shaped gram-negative microbe taxonomically affiliated with the Cytobacillus genus, having an optimal growth at 37°C in a partially alkaline environment (pH 8.0). This human gut isolate showed continuous growth in the presence of salts (up to 7% NaCl and 10% KCl), antibiotics, metals and metalloids [silver nitrate (up to 2 mM); lead acetate (up to 2 mM); sodium arsenate (up to 10 mM); potassium dichromate (up to 2 mM)], gastric and intestinal conditions, diverse temperature (25–50°C), and pH (5–9) conditions making it fit to survive in the highly variable gut environment. Genomic characterization identified the presence of gene clusters for diverse bio-catalytic activity, stress response, and antimicrobial activity, as well as it indicated the absence of pathogenic gene islands. A combination of functional features like anti-amylase, anti-lipase, glutenase, prolyl endopeptidase, lactase, bile salt hydrolase, cholesterol oxidase, and anti-pathogenic activity is indicative of its probiotic potential in various disorders. This was further substantiated by the CaCo-2 cell line assay confirming its cellular adherence and biosafety. Conclusively, human gut isolate possessed significant probiotic potential that can be used to promote animal and human health.

Efficiently unsterile polyhydroxyalkanoate production from lignocellulose by using alkali-halophilic Halomonas alkalicola M2

The alkali-halophilic Halomonas alkalicola M2 was isolated and developed for an open unsterile polyhydroxyalkanoate (PHA) fermentation from lignocellulose at pH 10.0 and NaCl 70 g/L. The alkaline pretreatment liquid (APL) was converted into PHA by the strain, which was significantly affected by the cultural conditions, including pH, NaCl concentration, nitrogen source, and APL concentration. The extracted PHA was composed of three monomers and similar in physicochemical properties to conventional short chain-length PHA. A record yield of 2.1 and 5.9 g of PHA was accumulated from 100 g dry bamboo powder (BP) by using APL and APL combined with hydrolysate during a 48-h open unsterile fermentation process, respectively. In summary, the alkali-halophilic H. alkalicola M2 achieved the open unsterile fermentation for lignocellulose efficient bioconversion into PHA under high alkalinity and salinity conditions and would be an ideal producer in the field.

A Review on Biological Synthesis of the Biodegradable Polymers Polyhydroxyalkanoates and the Development of Multiple Applications

Polyhydroxyalkanoates, or PHAs, belong to a class of biopolyesters where the biodegradable PHA polymer is accumulated by microorganisms as intracellular granules known as carbonosomes. Microorganisms can accumulate PHA using a wide variety of substrates under specific inorganic nutrient limiting conditions, with many of the carbon-containing substrates coming from waste or low-value sources. PHAs are universally thermoplastic, with PHB and PHB copolymers having similar characteristics to conventional fossil-based polymers such as polypropylene. PHA properties are dependent on the composition of its monomers, meaning PHAs can have a diverse range of properties and, thus, functionalities within this biopolyester family. This diversity in functionality results in a wide array of applications in sectors such as food-packaging and biomedical industries. In order for PHAs to compete with the conventional plastic industry in terms of applications and economics, the scale of PHA production needs to grow from its current low base. Similar to all new polymers, PHAs need continuous technological developments in their production and material science developments to grow their market opportunities. The setup of end-of-life management (biodegradability, recyclability) system infrastructure is also critical to ensure that PHA and other biobased biodegradable polymers can be marketed with maximum benefits to society. The biobased nature and the biodegradability of PHAs mean they can be a key polymer in the materials sector of the future. The worldwide scale of plastic waste pollution demands a reformation of the current polymer industry, or humankind will face the consequences of having plastic in every step of the food chain and beyond. This review will discuss the aforementioned points in more detail, hoping to provide information that sheds light on how PHAs can be polymers of the future.

Biomolecules Production from Greenhouse Gases by Methanotrophs

Harmful effects on living organisms and the environment are on the rise due to a significant increase in greenhouse gas (GHG) emissions through human activities. Therefore, various research initiatives have been carried out in several directions in relation to the utilization of GHGs via physicochemical or biological routes. An environmentally friendly approach to reduce the burden of significant emissions and their harmful effects is the bioconversion of GHGs, including methane (CH4) and carbon dioxide (CO2), into value-added products. Methanotrophs have enormous potential for the efficient biotransformation of CH4 to various bioactive molecules, including biofuels, polyhydroxyalkanoates, and fatty acids. This review highlights the recent developments in methanotroph-based systems for methanol production from GHGs and proposes future perspectives to improve process sustainability via biorefinery approaches.

Anaerobic Digestion of Agri-Food Wastes for Generating Biofuels

Presently, fossil fuels are extensively employed as major sources of energy, and their uses are considered unsustainable due to emissions of obnoxious gases on the burning of fossil fuels, which can lead to severe environmental complications, including human health. To tackle these issues, various processes are developing to waste as a feed to generate eco-friendly fuels. The biological production of fuels is considered to be more beneficial than physicochemical methods due to their environmentally friendly nature, high rate of conversion at ambient physiological conditions, and less energy-intensive. Among various biofuels, hydrogen (H₂) is considered as a wonderful due to high calorific value and generate water molecule as end product on the burning. The H₂ production from biowaste is demonstrated, and agri-food waste can be potentially used as a feedstock due to their high biodegradability over lignocellulosic-based biomass. Still, the H₂ production is uneconomical from biowaste in fuel competing market because of low yields and increased capital and operational expenses. Anaerobic digestion is widely used for waste management and the generation of value-added products. This article is highlighting the valorization of agri-food waste to biofuels in single (H₂) and two-stage bioprocesses of H₂ and CH₄ production.

Challenges and Perspectives of Polyhydroxyalkanoate Production From Microalgae/Cyanobacteria and Bacteria as Microbial Factories: An Assessment of Hybrid Biological System

Polyhydroxyalkanoates (PHAs) are the biopolymer of choice if we look for a substitute of petroleum-based non-biodegradable plastics. Microbial production of PHAs as carbon reserves has been studied for decades and PHAs are gaining attention for a wide range of applications in various fields. Still, their uneconomical production is the major concern largely attributed to high cost of organic substrates for PHA producing heterotrophic bacteria. Therefore, microalgae/cyanobacteria, being photoautotrophic, prove to have an edge over heterotrophic bacteria. They have minimal metabolic requirements, such as inorganic nutrients (CO2, N, P, etc.) and light, and they can survive under adverse environmental conditions. PHA production under photoautotrophic conditions has been reported from cyanobacteria, the only candidate among prokaryotes, and few of the eukaryotic microalgae. However, an efficient cultivation system is still required for photoautotrophic PHA production to overcome the limitations associated with (1) stringent management of closed photobioreactors and (2) optimization of monoculture in open pond culture. Thus, a hybrid system is a necessity, involving the participation of microalgae/cyanobacteria and bacteria, i.e., both photoautotrophic and heterotrophic components having mutual interactive benefits for each other under different cultivation regime, e.g., mixotrophic, successive two modules, consortium based, etc. Along with this, further strategies like optimization of culture conditions (N, P, light exposure, CO2 dynamics, etc.), bioengineering, efficient downstream processes, and the application of mathematical/network modeling of metabolic pathways to improve PHA production are the key areas discussed here. Conclusively, this review aims to critically analyze cyanobacteria as PHA producers and proposes economically sustainable production of PHA from microbial autotrophs and heterotrophs in "hybrid biological system."

Biopolymer production by halotolerant bacteria isolated from Caatinga biome

Saline environments are extreme habitats with a high diversity of microorganisms source of a myriad of biomolecules. These microorganisms are assigned as extremophiles recognized to be producers of new natural compounds, which can be synthesized by helping to survive under harshness and extreme conditions. In Brazil, in the saline and semi-arid region of Areia Branca (Caatinga biome), halotolerant bacteria (able to growth at high NaCl concentrations) were isolated from rhizosphere of native plants Blutaparon portulacoides and Spergularia sp. and their biopolymer production was studied. A total of 25 bacterial isolates were identified at genus level based on 16S rRNA gene sequence analysis. Isolates were mainly Gram-positive bacteria from Bacillaceae, Staphylococcaceae, Microbacteriaceae, and Bacillales XII incertae sedis families, affiliates to Bacillus, Staphylococcus, Curtobacterium, and Exiguobacterium genera, respectively. One of the Gram-negative isolates was identified as member of the Pseudomonadaceae family, genus Pseudomonas. All the identified strains were halotolerant bacteria with optimum growth at 0.6-2.0 M salt concentrations. Assays for biopolymer production showed that the halotolerant strains are a rich source of compounds as polyhydroxyalkanoates (PHA), biodegradable biopolymer, such as poly(3-hydroxybutyrate) (PHB) produced from low-cost substrates, and exopolysaccharides (EPS), such as hyaluronic acid (HA), metabolite of great interest to the cosmetic and pharmaceutical industry. Also, eight bacterial EPS extracts showed immunostimulatory activity, promising results that can be used in biomedical applications. Overall, our findings demonstrate that these biomolecules can be produced in culture medium with 0.6-2.0 M NaCl concentrations, relevant feature to avoid costly production processes. This is the first report of biopolymer-producing bacteria from a saline region of Caatinga biome that showed important biological activities.

Concrete Crack Restoration Using Bacterially Induced Calcium Metabolism

Concrete structures are prone to develop cracks and cause devastation. Repair and renovation are not enough to ensure complete eradication of crack development. The entire process is costly and laborious. The microbiologically induced calcium carbonated precipitation can be effective in restoring the cracks. The calcium-based nutrients along with specific bacterial strain have been used in the present investigation. The pellets of calcium as per Fourier transform infrared spectroscopy and energy-dispersive X-ray spectroscopy are deposited in the cracks of the concrete over a period of 7 days of incubation. The presence of bacteria in the calcium precipitates as demonstrated by scanning electron microscope provides adequate strength and adhering quality to the pellets. The effective filling of cracks is confirmed with the help ultrasonic pulse velocity test also. Since, elephantine heritage and high sky buildings have high maintenance costs, the use of present technique will cut down the cost and duration of restoration.

Supplementary Information

The online version of this article (10.1007/s12088-020-00916-0) contains supplementary material, which is available to authorized users.

Critical overview of biomass feedstocks as sustainable substrates for the production of polyhydroxybutyrate (PHB)

Polyhydroxybutyrates (PHBs) are a class of biopolymers produced by different microbial species and are biodegradable and biocompatible in nature as opposed to petrochemically derived plastics. PHBs have advanced applications in medical sector, packaging industries, nanotechnology and agriculture, among others. PHB is produced using various feedstocks such as glycerol, dairy wastes, agro-industrial wastes, food industry waste and sugars. Current focus on PHB research has been primarily on reducing the cost of production and, on downstream processing to isolate PHB from cells. Recent advancements to improve the productivity and quality of PHB include genetic modification of producer strain and modification of PHB by blending to develop desirable properties suited to diversified applications. Selection of feedstock plays a critical role in determining the economic feasibility and sustainability of the process. This review provides a bird's eye view of the suitability of different waste resources for producing polyhydroxybutyrate; providing state-of the art information and analysis.

Polyhydroxyalkanoate (PHA) biosynthesis from directly valorized ragi husk and sesame oil cake by Bacillus megaterium strain Ti3: Statistical optimization and characterization

Polyhydroxyalkanoates (PHAs) signify the most promising biological substitute to petrochemical plastics. Renewable and inexpensive agro-industrial by-products can be used as potent fermentation feedstocks for sustainable PHA biosynthesis. This study aimed at using a wild type B. megaterium strain Ti3 innate hydrolytic enzyme/s for eco-friendly valorization of 16 lignocellulosic agrowastes to PHA without pretreatments. Initial hydrolytic screening PHA concentration of (0.04-0.17 g/L), highlighted the strain's metabolic versatility. Pareto ranking of Taguchi orthogonal array (TOA) established ragi husk (RH), sesame oil cake (SOC) and KH₂PO₄ as the most influential factors (p < 0.05). The optimized and validated Response surface methodology (RSM) model (R², 0.979; desirability, 1) resulted in 3.8 and 3.6 fold increased PHA production, 4.3 and 3.25 fold increased PHA productivity. A positive correlation (r², 0.5-0.97) was observed amid the producer innate hydrolytic enzymes (lipase, amylase and cellulase) and PHA production. The PHA was characterized by ¹H and ¹³C NMR, GPC, TGA. The polymer was identified as a scl-mcl copolyester with 92% 3HB (3-hydroxybutyrate) and 8% 3HHp (3-hydroxyheptanoate) monomers by NMR. This the first report on B. megaterium self-enzyme reliant non-food agrowastes bioconversion to PHA with 3HHp (3-hydroxyheptanoate) monomers excluding precursor addition, commercial enzymes, pure carbon and nitrogen sources.

Mapping Microbial Capacities for Bioremediation: Genes to Genomics

Bioremediation is a process wherein the decontamination strategies are designed so that a site could achieve the environmental abiotic and biotic parameters close to its baseline. In the process, the driving force is the available microbial genetic degradative capabilities, which are supported by required nutrients so that the desired expression of these capabilities could be exploited in favour of removal of pollutants. With genomics tools not only the available abilities could be estimated but their dynamic performance could also be established. These tools are now playing important role in bioprocess optimization, which not only derive the bio-stimulation plans but also could suggest possible genetic bio-augmentation options.

Aligning Microbial Biodiversity for Valorization of Biowastes: Conception to Perception

Generation of biowastes is increasing rapidly and its uncontrolled, slow and persistent fermentation leads to the release of Green-house gases (GHGs) into the environment. Exploration and exploitation of microbial diversity for degrading biowastes can result in producing diverse range of bioactive molecules, which can act as a source of bioenergy, biopolymers, nutraceuticals and antimicrobials. The whole process is envisaged to manage biowastes, and reduce their pollution causing capacity, and lead to a sustainable society. A strategy has been proposed for: (1) producing bioactive molecules, and (2) achieving a zero-pollution emission by recycling of the GHGs through biological routes.

Prospects for the Use of Whey for Polyhydroxyalkanoate (PHA) Production

Plastic production and accumulation have devastating environmental effects, and consequently, the world is in need of environmentally friendly plastic substitutes. In this context, polyhydroxyalkanoates (PHAs) appear to be true alternatives to common plastics because they are biodegradable and biocompatible and can be biologically produced. Despite having comparable characteristics to common plastics, extensive PHA use is still hampered by its high production cost. PHAs are bacterial produced, and one of the major costs associated with their production derives from the carbon source used for bacterial fermentation. Thus, several industrial waste streams have been studied as candidate carbon sources for bacterial PHA production, including whey, an environmental contaminant by-product from the dairy industry. The use of whey for PHA production could transform PHA production into a less costly and more environmentally friendly process. However, the efficient use of whey as a carbon source for PHA production is still hindered by numerous issues, including whey pre-treatments and PHA producing strain choice. In this review, current knowledge on using whey for PHA production were summarized and new ways to overcome the challenges associated with this production process were proposed.

Cloning, Sequencing and In Silico Analysis of phbC Gene from Pseudomonas spp

We report here isolation and analysis of PCR amplified phbC gene from Pseudomonas spp. strain phbmbb15-B3. This strain was previously developed from mutations of landfill isolates and found to be an efficient Poly Hydroxy butyrate (PHB) producer. The fragment was cloned into pTZ57R/T cloning vector and then the gene has been sequenced and submitted to GenBank (Accession Number KT933807). The sequence results confirmed the clone to be phbC homologue and the ORF was 910 base pairs long and coded for 303 amino acids, which shared 92-99% amino acid sequence identity with the available bacterial sequences in Gene Bank. We could also predict the primary and secondary structural features of the expected phbC protein. Phylogenetic analysis also revealed its similarity with several pseudomonads. The results of the present study shall provide a stable foundation for further research on modeling studies of PHB synthase and developing PHB a commercial technology.

Role of PhaC Type I and Type II Enzymes during PHA Biosynthesis

PHA synthases (PhaC) are grouped into four classes based on the kinetics and mechanisms of reaction. The grouping of PhaC enzymes into four classes is dependent on substrate specificity, according to the preference in forming short-chain-length (scl) or medium-chain-length (mcl) polymers: Class I, Class III and Class IV produce scl-PHAs depending on propionate, butyrate, valerate and hexanoate precursors, while Class II PhaC synthesize mcl-PHAs based on the alkane (C6 to C14) precursors. PHA synthases of Class I, in particular PhaC_Cs from Chromobacterium USM2 and PhaC_Cn/RePhaC1 from Cupriavidus necator/Ralstonia eutropha, have been analysed and the crystal structures of the C-domains have been determined. PhaC_Cn/RePhaC1 was also studied by X-ray absorption fine-structure (XAFS) analysis. Models have been proposed for dimerization, catalysis mechanism, substrate recognition and affinity, product formation, and product egress route. The assays based on amino acid substitution by mutagenesis have been useful to validate the hypothesis on the role of amino acids in catalysis and in accommodation of bulky substrates, and for the synthesis of PHB copolymers and medium-chain-length PHA polymers with optimized chemical properties.

Co-utilization of Crude Glycerol and Biowastes for Producing Polyhydroxyalkanoates

Polyhydroxyalkanoate (PHA) production by Bacillus thuringiensis EGU45 and defined mixed culture of Bacillus spp. were studied by using crude glycerol (CG) and hydrolyzed biowastes as feed material. Hydrolysates from onion peels (OP), potato peels, pea-shells (PS), apple pomace 2% total solids obtained with defined mixed hydrolytic cultures (MHC2) were inoculated with B. thuringiensis EGU45 and defined mixed bacterial cultures (5MC1), which produced PHA at the rate of 40-350 and 65-450 mg/L, respectively. Addition of CG (1%, v/v) to these hydrolysates resulted in 1.8-fold and 4.5-fold enhancement in PHA production from OP by B. thuringiensis EGU45 and 5MC1, respectively. Co-utilization of OP and PS (in 2:1 ratio) supplemented with CG (1%, v/v) by B. thuringiensis EGU45 resulted in 2-fold increase in PHA production in comparison to OP + CG. This co-metabolism of OP and PS also enabled PHA co-polymer production (1300 mg/L), having an enhanced HV content of 21.2% (w/w).

Bacillus and biopolymer: Prospects and challenges

The microbially derived polyhydroxyalkanoates biopolymers could impact the global climate scenario by replacing the conventional non-degradable, petrochemical-based polymer. The biogenesis, characterization and properties of PHAs by Bacillus species using renewable substrates have been elaborated by many for their wide applications. On the other hand Bacillus species are advantageous over other bacteria due to their abundance even in extreme ecological conditions, higher growth rates even on cheap substrates, higher PHAs production ability, and the ease of extracting the PHAs. Bacillus species possess hydrolytic enzymes that can be exploited for economical PHAs production. This review summarizes the recent trends in both non-growth and growth associated PHAs production by Bacillus species which may provide direction leading to future research towards this growing quest for biodegradable plastics, one more critical step ahead towards sustainable development.

Assessment of Methylobacterium oryzae CBMB20 aggregates for salt tolerance and plant growth promoting characteristics for bio-inoculant development

Salinity is one of the major factors contributing to the loss of crop productivity and thereby impacting livelihood of people in more than 100 countries of the world and the area of land affected by salinity is increasing day by day. This will worsen due to various factors such as drought that might result in high soil salinity. Use of plant growth promoting rhizobacteria is one of the promising eco-friendly strategies for salinity stress management as part of sustainable agricultural practices. However, it requires selecting rhizobacteria with good survivability and adaptation to salt stress. In this study we report aggregation of Methylobacterium oryzae CBMB20 cells grown in media containing high C/N ratio (30:1) than in media containing low C/N ratio (7:1). Aggregated Methylobacterium oryzae CBMB20 cells exhibited enhanced tolerance to UV irradiation, heat, desiccation, different temperature regimes, oxidative stress, starvation and supported higher population in media. Poly-β-hydroxybutyrate accumulation, exopolysaccharide production, proline accumulation and biofilm formation were good at 100 mM salt concentration with good microbial cell hydrophobicity at both 50 and 100 mM than other concentrations. Both the aggregated and non-aggregated cells grown under 0-200 mM salt concentrations produced IAA even at 200 mM salt concentration with a peak at 100 mM concentration with aggregated cells producing significantly higher quantities. ACC deaminase activity was observed in all NaCl concentrations studied with gradual and drastic reduction in aggregated and non-aggregated cells over increased salt concentrations.

Polyhydroxyalkanoate Production and Degradation Patterns in Bacillus Species

Bacteria under stress conditions of excess of carbon (C) and limitations of nutrients divert its metabolism towards C storage as energy reservoir-polyhydroxyalkanoate (PHA). Different Bacillus species-B. cereus and B. thuringiensis, were monitored to produce PHA from different C sources-glucose, crude glycerol and their combination at 37 °C for period up to 192 h. PHA production and its composition was found to vary with feed and bacterial strains. PHA production on crude glycerol continued to increase up to 120 h, reaching a maximum of 2725 mg/L with an effective yield of 71% of the dry cell mass. Depolymerization of PHA was observe to initiate after 96 h of incubation up to 192 h. PHA degradation products have been envisaged to be applied in medical field: tissue engineering, drug carriers, memory enhancers, antiosteoporosis, biodegradable implants. The PHA production and degradation cycle for 192 h has not been reported previously in literature.

Biomedical Applications of Polyhydroxyalkanoates

Polyhydroxyalkanoates (PHA) are produced by a large number of microbes under stress conditions such as high carbon (C) availability and limitations of nutrients such as nitrogen, potassium, phosphorus, magnesium, and oxygen. Here, microbes store C as granules of PHAs-energy reservoir. PHAs have properties, which are quite similar to those of synthetic plastics. The unique properties, which make them desirable materials for biomedical applications is their biodegradability, biocompatibility, and non-toxicity. PHAs have been found suitable for various medical applications: biocontrol agents, drug carriers, biodegradable implants, tissue engineering, memory enhancers, and anticancer agents.

Effect of glucose and olive oil as potential carbon sources on production of PHAs copolymer and tercopolymer by Bacillus cereus FA11

In this study, the influence of different physicochemical parameters on the yield of polyhydroxyalkanoates (PHAs) produced by Bacillus cereus FA11 is investigated. The physicochemical factors include pH, temperature, time, inoculum size and its age, agitation speed and composition of the glucose rich peptone deficient (GRPD) medium. During two-stage fermentation, B. cereus FA11 produced a significantly high (p < 0.05) yield (80.59% w/w) of PHAs copolymer using GRPD medium containing glucose (15 g/L) and peptone (2 g/L) at pH 7, 30 °C and 150 rpm after 48 h of incubation. On the other hand, the presence of olive oil (1% v/v) and peptone (2 g/L) in the GRPD medium resulted in biosynthesis of tercopolymer during two-stage fermentation and the yield of tercopolymer was 60.31% (w/w). The purified PHAs was characterized by Fourier transform infrared spectroscopy and proton resonance magnetic analysis. Proton resonance magnetic analysis confirmed that the tercopolymer was comprised of three different monomeric subunits, i.e., 3-hydroxybutyrate, 3-hydroxyvalerate and 6-hydroxyhexanoate.

Dark-Fermentative Biological Hydrogen Production from Mixed Biowastes Using Defined Mixed Cultures

Biological hydrogen (H₂) production from the biowastes is widely recognized as a suitable alternative approach to utilize low cost feed instead of costly individual sugars. In the present investigation, pure and mixed biowastes were fermented by defined sets of mixed cultures for hydrolysis and H₂ production. Under batch conditions, up to 65, 67 and 70 L H₂/kg total solids (2%, TS) were evolved from apple pomace (AP), onion peels (OP) and potato peels (PP) using a combination of hydrolytic mixed culture (MHC5) and mixed microbial cultures (MMC4 or MMC6), respectively. Among the different combinations of mixed biowastes including AP, OP, PP and pea-shells, the combination of OP and PP exhibited maximum H₂ production of 73 and 84 L/kg TS with MMC4 and MMC6, respectively. This study suggested that H₂ production can be effectively regulated by using defined sets of mixed cultures for hydrolysis and H₂ production from pure and mixed biowastes as feed even under unsterile conditions.

Co-metabolism of substrates by Bacillus thuringiensis regulates polyhydroxyalkanoate co-polymer composition

Polyhydroxyalkanoate (PHA) production by Bacillus thuringiensis EGU45 was studied by co-metabolism of crude glycerol (CG) (1%, v/v), glucose (0.05-0.5%, w/v) and propionic acid (0.05-0.5%, v/v) under batch (shake flask) culture conditions. Glycerol+PA combination resulted in 15-100mg/L PHA co-polymers with a HV content of 33-81mol%. The addition of NH₄Cl (0.5%, w/v) to CG+PA enhanced PHA production by 1.55-fold, with a HV content of 58-70mol%. The time period of incubation of PA to the feed: CG+glucose was optimized to be 3h after initiation of fermentation. The PHA contents were found to be stable at 1900-2050mg/L up scaling from 0.4 to 2.0L feed material. Biochemical characterization through GC-MS of PHA co-polymer revealed the presence of 3-hydroxydecanoate (3-HDD), 3-hydroxyoctadecanoate (3HOD), 3-hydroxyhexadecanoate (3HHD).

Microbial Cometabolism and Polyhydroxyalkanoate Co-polymers

Polyhydroxyalkanoate (PHAs) are natural, biodegradable biopolymers, which can be produced from renewable materials. PHAs have potential to replace petroleum derived plastics. Quite a few bacteria can produce PHA under nutritional stress. They generally produce homopolymers of butyrate i.e., polyhydroxybutyrate (PHB), as a storage material. The biochemical characteristics of PHB such as brittleness, low strength, low elasticity, etc. make these unsuitable for commercial applications. Co-polymers of PHA, have high commercial value as they overcome the limitations of PHBs. Co-polymers can be produced by supplementing the feed with volatile fatty acids or through hydrolysates of different biowastes. In this review, we have listed the potential bacterial candidates and the substrates, which can be co-metabolized to produce PHA co-polymers.

Integrative Approach for Producing Hydrogen and Polyhydroxyalkanoate from Mixed Wastes of Biological Origin

In this study, an integrative approach to produce biohydrogen (H2) and polyhydroxyalkanoates (PHA) from the wastes of biological origin was investigated. A defined set of mixed cultures was used for hydrolysis and the hydrolysates were used to produce H2. The effluent from H2 production stage was used for PHA production. Under batch culture, a maximum of 62 l H2/kg of pure potato peels (Total solid, TS 2 %, w/v) and 54 l H2/kg of mixed biowastes (MBW1) was recorded. Using effluent from the H2 production stage of biowaste mixture (MBW1), Bacillus cereus EGU43 could produce 195 mg PHA/l and 15.6 % (w/w). Further, supplementation of GM-2 medium (0.1×) and glucose (0.5 %) in H2 production stage effluents, resulted in significant improvements of up to 11 and 41.7 % of PHA contents, respectively. An improvement of 3.9- and 17-fold in PHA yields as compared to with and without integrative H2 production from the MBW1 has been recorded. This integrative approach seems to be a suitable process to improve the yields of H2 and PHA by mixing biowastes.

Biorefinery for Glycerol Rich Biodiesel Industry Waste

The biodiesel industry has the potential to meet the fuel requirements in the future. A few inherent lacunae of this bioprocess are the effluent, which is 10 % of the actual product, and the fact that it is 85 % glycerol along with a few impurities. Biological treatments of wastes have been known as a dependable and economical direction of overseeing them and bring some value added products as well. A novel eco-biotechnological strategy employs metabolically diverse bacteria, which ensures higher reproducibility and economics. In this article, we have opined, which organisms and what bioproducts should be the focus, while exploiting glycerol as feed.

Production of co-polymers of polyhydroxyalkanoates by regulating the hydrolysis of biowastes

Production of polyhydroxyalkanoate (PHA) co-polymers by Bacillus spp. was studied by feeding defined volatile fatty acids (VFAs) obtained through controlled hydrolysis of various wastes. Eleven mixed hydrolytic cultures (MHCs) each containing 6 strains could generate VFA from slurries of (2% total solids): pea-shells (PS), potato peels (PP), apple pomace (AP) and onion peels (OP). PS hydrolysates (obtained with MHC2 and MHC5) inoculated with Bacillus cereus EGU43 and Bacillus thuringiensis EGU45 produced co-polymers of PHA at the rate of 15-60mg/L with a 3HV content of 1%w/w. An enhancement in PHA yield of 3.66-fold, i.e. 205-550mg/L with 3HV content up to 7.5%(w/w) was observed upon addition of OP hydrolysate and 1% glucose (w/v) to PS hydrolysates. This is the first demonstration, where PHA co-polymer composition, under non-axenic conditions, could be controlled by customizing VFA profile of the hydrolysate by the addition of different biowastes.

Comparison of Different Strategies for Selection/Adaptation of Mixed Microbial Cultures Able to Ferment Crude Glycerol Derived from Second-Generation Biodiesel

Objective of this study was the selection and adaptation of mixed microbial cultures (MMCs), able to ferment crude glycerol generated from animal fat-based biodiesel and produce building-blocks and green chemicals. Various adaptation strategies have been investigated for the enrichment of suitable and stable MMC, trying to overcome inhibition problems and enhance substrate degradation efficiency, as well as generation of soluble fermentation products. Repeated transfers in small batches and fed-batch conditions have been applied, comparing the use of different inoculum, growth media, and Kinetic Control. The adaptation of activated sludge inoculum was performed successfully and continued unhindered for several months. The best results showed a substrate degradation efficiency of almost 100% (about 10 g/L glycerol in 21 h) and different dominant metabolic products were obtained, depending on the selection strategy (mainly 1,3-propanediol, ethanol, or butyrate). On the other hand, anaerobic sludge exhibited inactivation after a few transfers. To circumvent this problem, fed-batch mode was used as an alternative adaptation strategy, which led to effective substrate degradation and high 1,3-propanediol and butyrate production. Changes in microbial composition were monitored by means of Next Generation Sequencing, revealing a dominance of glycerol consuming species, such as Clostridium, Klebsiella, and Escherichia.

Overexpression of succinyl-CoA synthase for poly (3-hydroxybutyrate-co-3-hydroxyvalerate) production in engineered Escherichia coli BL21(DE3)

AIM

This study aims to increase the 3-hydroxyvalerate (3HV) fraction in poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [P(HB-co-HV)] using succinyl-CoA synthase.

METHODS AND RESULTS

Escherichia coli YH090, a polyhydroxyalkonate (PHA)-producing strain, was further engineered for overexpression of succinyl-CoA synthase genes (sucCD), and examined for P(HB-co-HV) copolymer production in the presence of various precursor molecules using mixture analysis. Glycerol, succinate and propionate were screened as important factors for controlling intracellular PHA accumulation and monomer composition. Glycerol concentrations exerted the greatest influence on the overall biomass concentration and the intracellular PHA content, while propionate concentrations in the presence of succinate influenced the 3HV content of the copolymer. Mixture analysis also demonstrated that the engineered strain has the capacity to accumulate up to 80% of its cell dry weight (CDW) as PHA with a variable fraction of 3HV monomer (maximum of 72 wt %) depending on the controlled conditions.

CONCLUSIONS

Propionate is the principal precursor for 3HV monomer in P(HB-co-HV) biopolymer and its utilization requires conversion to propionyl-CoA. Engineered E. coli YHY99, overexpressing sucCD genes, leads to an increase of the succinyl-CoA pool, which enhances the conversion rate of propionate by providing a CoA supply to other acyltransferase enzymes that have a role in propionate utilization.

SIGNIFICANCE AND IMPACT OF THE STUDY

Engineered E. coli YHY99 was able to utilize propionate with a 4·5-fold increase in rate, as compared to the control strain, and resulted in the synthesis of a copolymer with high 3HV monomer content.

Challenges and Opportunities for Customizing Polyhydroxyalkanoates

Polyhydroxyalkanoates (PHAs) as an alternative to synthetic plastics have been gaining increasing attention. Being natural in their origin, PHAs are completely biodegradable and eco-friendly. However, consistent efforts to exploit this biopolymer over the last few decades have not been able to pull PHAs out of their nascent stage, inspite of being the favorite of the commercial world. The major limitations are: (1) the high production cost, which is due to the high cost of the feed and (2) poor thermal and mechanical properties of polyhydroxybutyrate (PHB), the most commonly produced PHAs. PHAs have the physicochemical properties which are quite comparable to petroleum based plastics, but PHB being homopolymers are quite brittle, less elastic and have thermal properties which are not suitable for processing them into sturdy products. These properties, including melting point (Tm), glass transition temperature (Tg), elastic modulus, tensile strength, elongation etc. can be improved by varying the monomeric composition and molecular weight. These enhanced characteristics can be achieved by modifications in the types of substrates, feeding strategies, culture conditions and/or genetic manipulations.

Dark fermentative bioconversion of glycerol to hydrogen by Bacillus thuringiensis

Biodiesel manufacturing units discharge effluents rich in glycerol. The need is to convert crude glycerol (CG) into useful products such as hydrogen (H2). Under batch culture, Bacillusthuringiensis EGU45 adapted on pure glycerol (PG, 2% v/v) resulted in an H2 yield of 0.646 mol/mol glycerol consumed on minimal media (250 mL) supplemented with 1% ammonium nitrate at 37°C over 4 days. Here, H2 constituted 67% of the total biogas. Under continuous culture, at 2 days of hydraulic retention time, B. thuringiensis immobilized on ligno-cellulosic materials (banana leaves - BL, 10% v/v) resulted in a H2 yield of 0.386 mol/mol PG consumed. On CG, the maximal H2 yield of 0.393 mol/mol feed consumed was recorded. In brief, B. thuringiensis could transform CG, on limited resources - minimal medium with sodium nitrate, by immobilizing them on cheap and easily available biowaste, which makes it a suitable candidate for H2 production on a large scale.

Integrative approach to produce hydrogen and polyhydroxybutyrate from biowaste using defined bacterial cultures

Biological production of hydrogen (H2) and polyhydroxybutyrate (PHB) from pea-shell slurry (PSS) was investigated using defined mixed culture (MMC4, composed of Enterobacter, Proteus, Bacillus spp.). Under batch culture, 19.0LH2/kg of PSS (total solid, TS, 2%w/v) was evolved. Using effluent from the H2 producing stage, Bacillus cereus EGU43 could produce 12.4% (w/w) PHB. Dilutions of PSS hydrolysate containing glucose (0.5%, w/v) resulted in 45-75LH2/kg TS fed and 19.1% (w/w) of PHB content. Under continuous culture, MMC4 immobilized on coconut coir (CC) lead to an H2 yield of 54L/kg TS fed and a PHB content of 64.7% (w/w). An improvement of 2- and 3.7-fold in H2 and PHB yields were achieved in comparison to control. This integrative approach using defined set of bacterial strains can prove effective in producing biomolecules from biowastes.

Ecobiotechnological strategy to enhance efficiency of bioconversion of wastes into hydrogen and methane

Vegetable wastes (VW) and food wastes (FW) are generated in large quantities by municipal markets, restaurants and hotels. Waste slurries (250 ml) in 300 ml BOD bottles, containing 3, 5 and 7 % total solids (TS) were hydrolyzed with bacterial mixtures composed of: Bacillus, Acinetobacter, Exiguobacterium, Pseudomonas, Stenotrophomonas and Sphingobacterium species. Each of these bacteria had high activities for the hydrolytic enzymes: amylase, protease and lipase. Hydrolysate of biowaste slurries were subjected to defined mixture of H2 producers and culture enriched for methanogens. The impact of hydrolysis of VW and FW was observed as 2.6- and 2.8-fold enhancement in H2 yield, respectively. Direct biomethanation of hydrolysates of VW and FW resulted in 3.0- and 1.15-fold improvement in CH4 yield, respectively. A positive effect of hydrolysis was also observed with biomethanation of effluent of H2 production stage, to the extent of 1.2- and 3.5-fold with FW and VW, respectively. The effective H2 yields were 17 and 85 l/kg TS fed, whereas effective CH4 yields were 61.7 and 63.3 l/kg TS fed, from VW and FW, respectively. This ecobiotechnological strategy can help to improve the conversion efficiency of biowastes to biofuels.