Alkaline proteases produced by Bacillus licheniformis RP1 grown on shrimp wastes: Application in chitin extraction, chicken feather-degradation and as a dehairing agent

Approach towards sustainable leather: Characterization and effective industrial application of proteases from Bacillus sps. for ecofriendly dehairing of leather hide

Tanneries are one of the most polluted industries known for production of massive amount of solid and liquid wastes without proper management and disposal. In this project we demonstrated the ecofriendly single step dehairing of leather hides with minimum pollution load. In this study, Bacillus species (Bacillus paralicheniformis strain BL.HK, Bacillus cereus strain BS.P) capable of producing proteases was successfully isolated by employing the new optimized selective media named M9-PEA as confirmed by 16sRNA genes sequencing. Sequence of 1493 bp long 16S rRNA genes of Bacillus paralicheniformis strain BL.HK and Bacillus cereus strain BS. P was submitted to GenBank under the accession number OP612692.1, OP612721.1 respectively The Bacillus paralicheniformis strain BL.HK, Bacillus cereus strain BS.P produced extracellur proteases of 28 and 37 KDa as resolved by SDS-PAGE respectively. The enzymes showed temperature optima at 50 °C and 55 °C and pH optima at 8.5, 9.5 respectively. The Proteases of Bacillus paralicheniformis strain BL.HK, Bacillus cereus strain BS.P were employed for dehairing of animal hides. The process resulted in significant removal of interfibriller substances without damage to collagen layer after one hour treatment, which was confirmed by histology, scanning electron microscopy. The quantification of various skin constituents (collagen, uronic acid, hexosamines, and GAGs) and pollution load parameters revealed that enzymatic treatment are more reliable. The results of skin application trials at industrial level with complete elimination of chemicals remark the biotechnological potential of these proteases for ecofriendly dehairing of animal hides without affecting the quality of the leathers produced.

Biodegradation and valorization of feather waste using the keratinase-producing bacteria and their application in environmentally hazardous industrial processes

Poultry feathers are widely discarded as waste worldwide and are considered an environmental pollutant and a reservoir of pathogenic bacteria. Therefore, developing sustainable and environmentally friendly methods for managing feather waste is one of the important environmental protection requirements. In this study, we investigated a rapid and eco-friendly method for the degradation and valorization of feather waste using keratinase-producing Pseudomonas geniculata H10, and evaluated the applicability of keratinase in environmentally hazardous chemical processes. Strain H10 completely degraded chicken feathers within 48 h by producing keratinase using them as sources of carbon, nitrogen, and sulfur. The culture contained a total of 402.8 μM amino acids, including 8 essential amino acids, which was higher than the chemical treatment. Keratinase was a serine-type metalloprotease with optimal temperature and pH of 30 °C and 9, respectively, and showed relatively high stability at 10-40 °C and pH 3-10. Keratinase was also able to degrade various insoluble keratins such as duck feathers, wool, human hair, and nails. Furthermore, keratinase exhibited more efficient depilation and wool modification than chemical treatment, as well as novel functionalities such as nematicidal and exfoliating activities. This suggests that strain H10 is a promising candidate for the efficient degradation and valorization of feather waste, as well as the improvement of current industrial processes that use hazardous chemicals.

Degradation of marine crustacean shell wastes through single-stage co-fermentation using proteolytic and chitinolytic bacteria

Management of crustacean shell waste (SW) through an eco-friendly technique is an environmental obligation to control pollution. The present study showed a novel approach through the simultaneous application of proteolytic and chitinolytic bacteria to effectively degrade unprocessed crustacean SW. For this, the bacteria with concurrent chitinolytic and proteolytic activity (Bacillus subtilis, Priestia megaterium, or Bacillus amyloliquefaciens) were applied either alone or in combination with one proteolytic strain (Paenibacillus alvei) in the unprocessed lobster, crab, and shrimp SW. The method degraded the shells with high deproteinization (> 90%) and demineralization efficiency (> 90%). The degradation was confirmed through scanning electron microscopy. The highest weight loss achieved with shrimp, crab, and lobster shells was 93.67%, 82.60%, and 83.33%, respectively. B. amyloliquefaciens + P. alvei combination produced the highest weight loss in crab and lobster SW, whereas all combinations produced statistically similar weight loss in shrimp SW. There was a concurrent production of N-acetyl glucosamine (up to 532.89, 627.87, and 498.95 mg/g of shrimp, lobster, and crab shell, respectively, with P. megaterium + P. alvei and B. amyloliquefaciens + P. alvei in all SW) and amino acids (4553.8, 648.89, 957.27 μg/g of shrimp, lobster, and crab shells, respectively with B. subtilis + P. alvei in shrimp and B. amyloliquefaciens + P. alvei in crab and lobster). Therefore, it is concluded that, for the first time, efficient degradation of crustacean shell waste was observed using chitinolytic and proteolytic bacterial fermentation with the obtention of byproducts, providing a basis for further application in SW management.

Complete genome sequence of Bacillus Licheniformis NWMCC0046, a candidate for the laundry industry

In this study, selected properties of protease and the complete genome sequence of Bacillus licheniformis NWMCC0046 were investigated, to discover laundry applications and other potential probiotic properties of this strain. Partial characterization of B. licheniformis NWMCC0046 showed that its protease has good activity both in alkaline environments and at low temperatures. Also, the protease is compatible with commercial detergents and can be used as a detergent additive for effective stain removal at low temperatures. The complete genome sequence of B. licheniformis NWMCC0046 is comprised of a 4,321,565 bp linear chromosome with a G + C content of 46.78% and no plasmids. It had 4504 protein-encoding genes, 81 transfer RNA (tRNA) genes, and 24 ribosomal RNA (rRNA) genes. Genomic analysis revealed genes involved in exocellular enzyme production and probiotic properties. In addition, genomic sequence analysis revealed specific genes encoding carbohydrate metabolism pathways, resistance, and cold adaptation capacity. Overall, protease properties show its potential as a detergent additive enzyme. The complete genome sequence information of B. licheniformis NWMCC0046 was obtained, and functional prediction revealed its numerous probiotic properties.

Optimization of protease production by Bacillus cereus HMRSC30 for simultaneous extraction of chitin from shrimp shell with value-added recovered products

Chitin extraction from shrimp shell powder (SSP) using protease-producing microbes is an attractive approach for valorizing shrimp shell waste because it is simple and environmentally friendly. In this study, the protease production and chitin extraction from SSP by Bacillus cereus HMRSC30 were simultaneously optimized using statistical approaches. As a result, fermentation in medium composed of 30 g/L SSP, 0.2 g/L MgSO₄ · 7H₂O, 3 g/L (NH₄)₂SO₄, 0.5 g/L K₂HPO₄, and 1.5 g/L KH₂PO₄ (pH 6.5) for 7 days maximized protease production (197.75 ± 0.33 U/mL) to approximately 1.64-fold compared to unoptimized condition (126.8 ± 0.047 U/mL). This level of enzyme production was enough to achieve 97.42 ± 0.28% deproteinization (DP) but low demineralization (DM) of 53.76 ± 0.21%. The high DM of 90% could be easily accomplished with the post-treatment using 0.4 M HCl and acetic acid. In addition, the study evaluated the possible roadmap to maximize the value of generated products and obtain additional profits from this microbial process. The observation showed the possibility of serving crude chitin as a bio-adsorbent with the highest removal capacity against Coomassie brilliant blue (97.99%), followed by methylene blue (74.42%). The recovered protease exhibited the function to remove egg yolk stain, indicating its potential for use as a detergent in de-staining. The results corroborated the benefits of microbial fermentation by B. cereus HMRSC30 as green process for comprehensive utilization of shrimp shell waste as well as minimizing waste generation along the established process.

Crustacean Waste-Derived Chitosan: Antioxidant Properties and Future Perspective

Chitosan is obtained from chitin that in turn is recovered from marine crustacean wastes. The recovery methods and their varying types and the advantages of the recovery methods are briefly discussed. The bioactive properties of chitosan, which emphasize the unequivocal deliverables contained by this biopolymer, have been concisely presented. The variations of chitosan and its derivatives and their unique properties are discussed. The antioxidant properties of chitosan have been presented and the need for more work targeted towards harnessing the antioxidant property of chitosan has been emphasized. Some portions of the crustacean waste are being converted to chitosan; the possibility that all of the waste can be used for harnessing this versatile multifaceted product chitosan is projected in this review. The future of chitosan recovery from marine crustacean wastes and the need to improve in this area of research, through the inclusion of nanotechnological inputs have been listed under future perspective.

Insights into substrate specificity of proteases for screening efficient dehairing enzymes

Though numerous proteases have been isolated and screened for the dehairing purpose, their use in the leather industry is limited mainly due to high cost, the need for expertise, and control during unit operation and alterations in the quality of leather due to lack of the right kind of substrate specificity of the enzymes used. This paper deals with the comparative specificity and dehairing efficiency of proteases isolated from Bacillus cereus VITSP01 (PE2) and Brevibacterium luteolum VITSP02 (PE). PE2 and PE were found to be trypsin-like and elastase-like serine proteases respectively. The protease of VITSP02 degraded the proteoglycans efficiently in comparison to that of VITSP01. The results suggest that the possible targets of the studied proteases might be skin proteoglycans, including those cementing the hair root bulb. Hence, an in-depth study on the substrate specificity of the dehairing proteases would help in designing an improved screening method for isolating potent dehairing enzymes.

Sustainable and eco-friendly strategies for shrimp shell valorization

Among the seafood used globally, shellfish consumption is in great demand. The utilization of these shellfish such as prawn/shrimp has opened a new market for the utilization of the shellfish wastes. Considering the trends on the production of wealth from wastes, shrimp shell wastes seem an important resource for the generation of high value products when processed on the principles of a biorefinery. In recent years, various chemical strategies have been tried to valorize the shrimp shell wastes, which required harsh chemicals such as HCl and NaOH for demineralization (DM) and deproteination (DP) of the shrimp wastes. Disposal of chemicals by the chitin and chitosan industries into the aquatic bodies pose harm to the aquatic flora and fauna. Thus, there has been intensive efforts to develop safe and sustainable technologies for the management of shrimp shell wastes. This review provides an insight about environmentally-friendly methods along with biological methods to valorize the shrimp waste compared to the strategies employing concentrated chemicals. The main objective of this review article is to explain the utilization shrimp shell wastes in a productive manner such that it would be offer environment and economic sustainability. The application of valorized by-products developed from the shrimp shell wastes and physical methods to improve the pretreatment process of shellfish wastes for valorization are also highlighted in this paper.

Cloning, Expression, and Structural Elucidation of a Biotechnologically Potential Alkaline Serine Protease From a Newly Isolated Haloalkaliphilic Bacillus lehensis JO-26

An alkaline protease gene of Bacillus lehensis JO-26 from saline desert, Little Rann of Kutch, was cloned and expressed in Escherichia coli BL21 (DE3). A 1,014-bp ORF encoded 337 amino acids. The recombinant protease (APrBL) with Asp 97, His 127, and Ser 280 forming catalytic triad belongs to the subtilase S8 protease family. The gene was optimally expressed in soluble fraction with 0.2 mM isopropyl β-D-thiogalactopyranoside (IPTG), 2% (w/v) NaCl at 28°C. APrBL, a monomer with a molecular mass of 34.6 kDa was active over pH 8–11 and 30°C−70°C, optimally at pH 10 and 50°C. The enzyme was highly thermostable and retained 73% of the residual activity at 80°C up to 3 h. It was significantly stimulated by sodium dodecyl sulfate (SDS), Ca²⁺, chloroform, toluene, n-butanol, and benzene while completely inhibited by phenylmethylsulfonyl fluoride (PMSF) and Hg²⁺. The serine nature of the protease was confirmed by its strong inhibition by PMSF. The APrBL gene was phylogenetically close to alkaline elastase YaB (P20724) and was distinct from the well-known commercial proteases subtilisin Carlsberg (CAB56500) and subtilisin BPN′ (P00782). The structural elucidation revealed 31.75% α-helices, 22.55% β-strands, and 45.70% coils. Although high glycine and fewer proline residues are a characteristic feature of the cold-adapted enzymes, the similar observation in thermally active APrBL suggests that this feature cannot be solely responsible for thermo/cold adaptation. The APrBL protease was highly effective as a detergent additive and in whey protein hydrolysis.

Development of nano-silver alkaline protease bio-conjugate depilating eco-benign formulation by utilizing potato peel based medium

A new bio-conjugate nano-silver enzyme conjugate complex (BC-nAg-Akp) was formulated containing alkaline protease (Akp). The present research involved synthesis of nAg particles in acetone concentrated enzyme sol using 0.005 M AgNO₃ solution formed within interaction time of 24 h through photo catalysis. The BC-nAG-Akp composite exhibited 1.9-fold increase in enzyme activity. The formulation was characterized using techniques viz., SEM, SEM-EDS, TEM, and DLS spectroscopy. The TEM analysis revealed synthesis of silver nano rods with size dimensions ranging from 40 to 80 nm. Likewise, the mean hydrodynamic diameter was 114 nm with polydispersity index of 0.260 and had the largest diffusion constant of 4.28 × 10⁸ amongst the three forms of the formulation (crude, acetone concentrated and partially purified) on DLS characterization. The SEM-EDS analysis showed occurrence of 18.32 and 3.79%weight and %atom of Ag element respectively. The prepared formulation was investigated for its dehairing performance. The ideal dehairing was achieved at 37 °C after 12 h of treatment. The histopathological studies revealed that complete dehairing with minimal rarefication was achieved and was found perform better compared to the commercial Akp and control (crude enzyme) formulations.

Influence of galactosidases on glycosaminoglycan removal Vis-à-Vis opening up of skin matrix to enable complete rehydration

Enzymatic interventions in animal skin processing are increasingly being considered as safe and benign technology options due to the reduction and replacement of potential harmful chemicals. In this study, galactosidases have been employed for rehydration of preserved skins and hides to improve the process efficiency and minimize hazardous sodium sulfide. The purpose of rehydration is to ensure the skin is hydrated uniformly to facilitate subsequent physico-chemical processes of leather making. Improper rehydration leads to reduction in the quality and value of the leather. The efficacy of the enzymatic process was studied using histological images and scanning electron microscopic analysis. Pollution load changes and the extent of carbohydrate removal were also quantified. The study indicates possibility for substantial reduction in process duration and water input (up to 30%) during rehydration of preserved animal skins when galactosidases are used as rehydration aid without affecting the quality of the leather. Thus use of galactosidases in rehydration ensures uniform accelerated rehydration and provides significant environmental benefits to tanning industry, by reducing harmful substances in subsequent operations.

Statistical Experimental Design Optimization of Microbial Proteases Production under Co-Culture Conditions for Chitin Recovery from Speckled Shrimp Metapenaeus monoceros By-Product

This study was designed with the aim to produce microbial proteases in presence of speckled shrimp by-product. For this reason, three strains belonging to Bacillus genus, namely, Aeribacillus pallidus VP3, Lysinibacillus fusiformis C250R, and Anoxybacillus kamchatkensis M1V were studied under co-culture procedure. A Taguchi L27 experimental design was applied to optimize the co-culture parameters. The experimental design was built with 9 factors (by-product powder concentration, the pH of the medium, the temperature, the sucrose concentration, the agitation speed, the inoculum sizes of VP3, M1V, and C250R strains, and the culture volume) at three different levels. The obtained results showed that a total protease activity of 8,182 U/mL could be achieved after 24 h of incubation in presence of 20 g/L shrimp by-product and 10 g/L sucrose, at an initial pH of 7, a 40°C temperature and absorbance, at 600 nm, of inoculum sizes of 0.1, 0.3, and 0.1 for VP3, M1V, and C250R strains, respectively. The agitation was set at 200 rpm, and the final volume was 25 mL. Taguchi's design allowed the identification of temperature, the inoculum size for strain VP3, the inoculum size for strain M1V, and the final culture volume as the most influencing variables. A Box-Behnken design with 27 experiments was carried out for the optimization of these four selected factors. Following such design, the highest protease production reached was 11,300 U/mL. This yield was obtained in a final culture volume of 15 mL containing 20 g/L shrimp by-product powder and 10 g/L sucrose and inoculated with VP3, C250R, and M1V strains at 0.05, 0.1, and 0.2, respectively. The flasks were incubated at 45°C for 24 h with shaking at 200 rpm. The efficiency of chitin extraction by co-cultivation was investigated under the latter conditions. The chitin yield from shells by-product was 16.7%. Fourier-Transform Infrared (FTIR) analysis of the obtained chitin displayed characteristic profiles similar to that of the commercial α-chitin.

Chitin and Chitosans: Characteristics, Eco-Friendly Processes, and Applications in Cosmetic Science

Huge amounts of chitin and chitosans can be found in the biosphere as important constituents of the exoskeleton of many organisms and as waste by worldwide seafood companies. Presently, politicians, environmentalists, and industrialists encourage the use of these marine polysaccharides as a renewable source developed by alternative eco-friendly processes, especially in the production of regular cosmetics. The aim of this review is to outline the physicochemical and biological properties and the different bioextraction methods of chitin and chitosan sources, focusing on enzymatic deproteinization, bacteria fermentation, and enzymatic deacetylation methods. Thanks to their biodegradability, non-toxicity, biocompatibility, and bioactivity, the applications of these marine polymers are widely used in the contemporary manufacturing of biomedical and pharmaceutical products. In the end, advanced cosmetics based on chitin and chitosans are presented, analyzing different therapeutic aspects regarding skin, hair, nail, and oral care. The innovative formulations described can be considered excellent candidates for the prevention and treatment of several diseases associated with different body anatomical sectors.

Mutagenesis and characterization of a Bacillus amyloliquefaciens strain for Cinnamomum camphora seed kernel oil extraction by aqueous enzymatic method

The purpose of the present study was to increase the proteinase activity of the strain NCU116 by combining ultraviolet irradiation and N-methyl-N'-nitro-N-nitroso guanidine treatment, in order to enhance the efficiency of Cinnamomum camphora seed kernel oil (CCSKO) extraction by aqueous enzymatic method (AEM). The mutated strain, designated as NCU116-1, was screened out by the ratio of hydrolytic zone diameter to colony diameter on skim milk plate. The proteinase activity (9116.1 U/ml) of NCU116-1 was increased by 31.9% compared with the parental strain. The extracellular enzymes produced by NCU116-1 included proteinase, pectase, glucoamylase, cellulase and amylase. The proteinase had the maximum activity at 50 °C. Its optimum temperature and pH value were approximately 45 °C and 8.0 respectively. Mn²⁺ was an activator of neutral proteinase. The glucoamylase had the maximum activity at 35 °C, and was activated by Cu²⁺, Fe³⁺ and Mn²⁺. Its optimum temperatures and pH value were 35 °C and 8.0 respectively. The pectinase had the maximum activity at 40 °C, and was activated by Ca²⁺ and Mn²⁺. Its optimum temperatures and pH value were 35-40 °C and 6.0 respectively. The optimum conditions of CCSKO extraction by AEM were also investigated. The results suggested that the best amount of enzyme solution and enzymolysis time were 20% (v/v) and 4 h, respectively. The oil extraction rate was 95.2% under these conditions. Thus, a suitable mutated strain was selected for CCSKO extraction by AEM and the optimum extraction conditions were determined.

Proteolytic and amylolytic enzymes from a newly isolated Bacillus mojavensis SA: Characterization and applications as laundry detergent additive and in leather processing

The present work aims to study the simultaneous production of highly alkaline proteases and thermostable α-amylases by a newly isolated bacterium Bacillus mojavensis SA. The optimum pH and temperature of amylase activity were 9.0 and 55°C, respectively, while those of the proteolytic activity were 12.0 and 60°C, respectively. Both α-amylase and protease enzymes showed a high stability towards a wide range of pH and temperature. Furthermore, SA crude enzymes were relatively stable towards non-ionic (Tween 20, Tween 80 and Triton X-100) and anionic (SDS) surfactants, as well as oxidizing agents. Both activities were improved by the presence of polyethylene glycol 4000 and glycerol. Additionally, the crude enzymes showed excellent stability against various solid and liquid detergents. Wash performance analysis revealed that the SA crude enzymes exhibited a remarkable efficiency in the removal of a variety type of stains, such as blood, chocolate, coffee and oil. On the other side, SA proteases revealed a potential dehairing activity of animal hide without chemical assistance or fibrous proteins hydrolysis. Thus, considering their promising properties, B. mojavensis SA crude enzymes could be used in several biotechnological bioprocesses.

Optimization of novel and greener approach for the coproduction of uricase and alkaline protease in Bacillus licheniformis by Box-Behnken model

This study explores a novel concept of coproduction of uricase and alkaline protease by Bacillus licheniformis using single substrate in single step. Seven local bacterial strains were screened for uricase production, amongst which B. licheniformis is found to produce highest uricase along with alkaline protease. Optimization of various factors influencing maximum enzyme coproduction by B. licheniformis is performed. Maximum enzyme productivity of 0.386 U/mL uricase and 0.507 U/mL alkaline protease is obtained at 8 hr of incubation period, 1% (v/v) inoculum, and at 0.2% (w/v) uric acid when the organism is cultivated at 25°C, 180 rpm, in a media containing xylose as a carbon source, urea as a nitrogen source, and initial pH of 9.5. The statistical experimental design method of Box-Behnken was further applied to obtain optimal concentration of significant parameters such as pH (9.5), uric acid concentration (0.1%), and urea concentration (0.05%). The maximum uricase and alkaline protease production by B. licheniformis using Box-Behnken design was 0.616 and 0.582 U/mL, respectively, with 1.6- and 1.13-fold increase as compared to one factor at a time optimized media. This study will be useful to develop an economic, commercially viable, and scalable process for simultaneous production of uricase and protease enzymes.

Current Status and New Perspectives on Chitin and Chitosan as Functional Biopolymers

The natural biopolymer chitin and its deacetylated product chitosan are found abundantly in nature as structural building blocks and are used in all sectors of human activities like materials science, nutrition, health care, and energy. Far from being fully recognized, these polymers are able to open opportunities for completely novel applications due to their exceptional properties which an economic value is intrinsically entrapped. On a commercial scale, chitosan is mainly obtained from crustacean shells rather than from the fungal and insect sources. Significant efforts have been devoted to commercialize chitosan extracted from fungal and insect sources to completely replace crustacean-derived chitosan. However, the traditional chitin extraction processes are laden with many disadvantages. The present review discusses the potential bioextraction of chitosan from fungal, insect, and crustacean as well as its superior physico-chemical properties. The different aspects of fungal, insects, and crustacean chitosan extraction methods and various parameters having an effect on the yield of chitin and chitosan are discussed in detail. In addition, this review also deals with essential attributes of chitosan for high value-added applications in different fields and highlighted new perspectives on the production of chitin and deacetylated chitosan from different sources with the concomitant reduction of the environmental impact.

Probing the crucial role of Leu31 and Thr33 of the Bacillus pumilus CBS alkaline protease in substrate recognition and enzymatic depilation of animal hide

The sapB gene, encoding Bacillus pumilus CBS protease, and seven mutated genes (sapB-L31I, sapB-T33S, sapB-N99Y, sapB-L31I/T33S, sapB-L31I/N99Y, sapB-T33S/N99Y, and sapB-L31I/T33S/N99Y) were overexpressed in protease-deficient Bacillus subtilis DB430 and purified to homogeneity. SAPB-N99Y and rSAPB displayed the highest levels of keratinolytic activity, hydrolysis efficiency, and enzymatic depilation. Interestingly, and at the semi-industrial scale, rSAPB efficiently removed the hair of goat hides within a short time interval of 8 h, thus offering a promising opportunity for the attainment of a lime and sulphide-free depilation process. The efficacy of the process was supported by submitting depilated pelts and dyed crusts to scanning electron microscopic analysis, and the results showed well opened fibre bundles and no apparent damage to the collagen layer. The findings also revealed better physico-chemical properties and less effluent loads, which further confirmed the potential candidacy of the rSAPB enzyme for application in the leather industry to attain an ecofriendly process of animal hide depilation. More interestingly, the findings on the substrate specificity and kinetic properties of the enzyme using the synthetic peptide para-nitroanilide revealed strong preferences for an aliphatic amino-acid (valine) at position P1 for keratinases and an aromatic amino-acid (phenylalanine) at positions P1/P4 for subtilisins. Molecular modeling suggested the potential involvement of a Leu31 residue in a network of hydrophobic interactions, which could have shaped the S4 substrate binding site. The latter could be enlarged by mutating L31I, fitting more easily in position P4 than a phenylalanine residue. The molecular modeling of SAPB-T33S showed a potential S2 subside widening by a T33S mutation, thus suggesting its importance in substrate specificity.

Lime and Sulphide-Free Dehairing of Animal Skin Using Collagenase-Free Alkaline Protease from Vibrio metschnikovii NG155

The objective of this work was to isolate a microorganism producing alkaline protease that can be used as an ecofriendly alternative to chemicals in dehairing process of leather manufacture. Alkaline protease producing bacterium Vibrio metschnikovii NG155 was isolated from soil samples of leather industry. The protease was highly effective in dehairing of goat skin, completely eliminating the use of lime and sulfide. Histological studies of the skin after dehairing showed that the enzyme did not damage the collagen layer and brought good fiber opening. Absence of collagenase activity was confirmed by reacting pure collagen with the enzyme and analyzing it on SDS PAGE, which showed no degradation of collagen. The enzyme was stable in a wide range of pH (7-11) and temperature (10-50 °C), which makes it suitable for industrial application.

De-hairing protease production by an isolated Bacillus cereus strain AT under solid-state fermentation using cow dung: Biosynthesis and properties

Agro-industrial residues and cow dung were used as the substrate for the production of alkaline protease by Bacillus cereus strain AT. The bacterial strain Bacillus cereus strain AT produced a high level of protease using cow dung substrate (4813 ± 62 U g(-1)). Physiological fermentation factors such as the incubation time (72 h), the pH (9), the moisture content (120%), and the inoculum level (6%) played a vital role in the enzyme bioprocess. The enzyme production improved with the supplementation of maltose and yeast extract as carbon and nitrogen sources, respectively. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis and zymogram analysis of the purified protease indicated an estimated molecular mass of 46 kDa. The protease enzyme was stable over a temperature range of 40-50 °C and pH 6-9, with maximum activity at 50 °C and pH 8. Among the divalent ions tested, Ca(2+), Na(+) and Mg(2+) showed activities of 107 ± 0.7%, 103.5 ± 1.3%, and 104.6 ± 0.9, respectively. The enzyme showed stability in the presence of surfactants such as sodium dodecyl sulfate and on various commercially available detergents. The crude enzyme effectively de-haired goat hides within 18 h of incubation at 30 °C. The enzymatic properties of this protease suggest its suitable application as an additive in detergent formulation and also in leather processing. Based on the laboratory results, the use of cow dung for producing and extracting enzyme is not cumbersome and is easy to scale up. Considering its cheap cost and availability, cow dung is an ideal substrate for enzyme bioprocess in an industrial point of view.

Chondroitin sulfate, hyaluronic acid and chitin/chitosan production using marine waste sources: characteristics, applications and eco-friendly processes: a review

In the last decade, an increasing number of glycosaminoglycans (GAGs), chitin and chitosan applications have been reported. Their commercial demands have been extended to different markets, such as cosmetics, medicine, biotechnology, food and textiles. Marine wastes from fisheries and aquaculture are susceptible sources for polymers but optimized processes for their recovery and production must be developed to satisfy such necessities. In the present work, we have reviewed different alternatives reported in the literature to produce and purify chondroitin sulfate (CS), hyaluronic acid (HA) and chitin/chitosan (CH/CHs) with the aim of proposing environmentally friendly processes by combination of various microbial, chemical, enzymatic and membranes strategies and technologies.