Bioinspired Multiscale Wrinkling Patterns on Curved Substrates: An Overview

Trunk-Inspired SWCNT-Based Wrinkled Films for Highly-Stretchable Electromagnetic Interference Shielding and Wearable Thermotherapy

Nowadays, the increasing electromagnetic waves generated by wearable devices are becoming an emerging issue for human health, so stretchable electromagnetic interference (EMI) shielding materials are highly demanded. Elephant trunks are capable of grabbing fragile vegetation and tearing trees thanks not only to their muscles but also to their folded skins. Inspired by the wrinkled skin of the elephant trunks, herein, we propose a winkled conductive film based on single-walled carbon nanotubes (SWCNTs) for multifunctional EMI applications. The conductive film has a sandwich structure, which was prepared by coating SWCNTs on both sides of the stretched elastic latex cylindrical substrate. The shrinking-induced winkled conductive network could withstand up to 200% tensile strain. Typically, when the stretching direction is parallel to the polarization direction of the electric field, the total EMI shielding effectiveness could surprisingly increase from 38.4 to 52.7 dB at 200% tensile strain. It is mainly contributed by the increased connection of the SWCNTs. In addition, the film also has good Joule heating performance at several voltages, capable of releasing pains in injured joints. This unique property makes it possible for strain-adjustable multifunctional EMI shielding and wearable thermotherapy applications.

Self-Assembly of Strain-Adaptable Surface-Enhanced Raman Scattering Substrate on Polydimethylsiloxane Nanowrinkles

Flexible surface-enhanced Raman scattering (SERS) substrates adaptable to strains enable effective sampling from irregular surfaces, but the preparation of highly stable and sensitive flexible SERS substrates is still challenging. This paper reports a method to fabricate a high-performance strain-adaptable SERS substrate by self-assembly of Au nanoparticles (AuNPs) on polydimethylsiloxane (PDMS) nanowrinkles. Nanowrinkles are created on prestrained PDMS slabs by plasma-induced oxidation followed by the release of the prestrain, and self-assembled AuNPs are transferred onto the nanowrinkles to construct the high-performance SERS substrate. The results show that the nanowrinkled structure can improve the surface roughness and enhance the SERS signals by ∼4 times compared to that of the SERS substrate prepared on flat PDMS substrates. The proposed SERS substrate also shows good adaptability to dynamic bending up to ∼|0.4| 1/cm with excellent testing reproducibility. Phenolic pollutants, including aniline and catechol, were quantitatively tested by the SERS substrate. The self-assembled flexible SERS substrate proposed here provides a powerful tool for chemical analysis in the fields of environmental monitoring and food safety inspection.

Controlled Surface Textures of Elastomeric Polyurethane Janus Particles: A Comprehensive Review

Colloidal particle research has witnessed significant advancements in the past century, resulting in a plethora of studies, novel applications, and beneficial products. This review article presents a cost-effective and low-tech method for producing Janus elastomeric particles of varied geometries, including planar films, spherical particles, and cylindrical fibers, utilizing a single elastomeric material and easily accessible chemicals. Different surface textures are attained through strain application or solvent-induced swelling, featuring well-defined wavelengths ranging from sub-microns to millimeters and offering easy adjustability. Such versatility renders these particles potentially invaluable for medical applications, especially in bacterial adhesion studies. The coexistence of "young" regions (smooth, with a small surface area) and "old" regions (wrinkled, with a large surface area) within the same material opens up avenues for biomimetic materials endowed with additional functionalities; for example, a Janus micromanipulator where micro- or nano-sized objects are grasped and transported by an array of wrinkled particles, facilitating precise release at designated locations through wrinkle pattern adjustments. This article underscores the versatility and potential applications of Janus elastomeric particles while highlighting the intriguing prospects of biomimetic materials with controlled surface textures.

Preparation of a self-matting, anti-fingerprint and skin-tactile wood coating via biomimetic self-wrinkling patterns

Inspired by natural wrinkled surfaces, artificial surfaces with biomimetic wrinkled structures have been widely used to improve optical properties, wettability, and antibacterial properties. However, the preparation of wrinkled structures has the disadvantages of long-time consumption and complex processes. Herein, we prepared a self-wrinkling polyurethane-acrylate (PUA) wood coating via biomimetic self-wrinkling patterns by using a light-emitting diode (LED)/excimer/mercury lamp curing system, which was capable of self-matting, anti-fingerprint and skin-tactile performance. By adjusting the irradiation intensity in the curing system, the wavelength (λ) and amplitude (A) of wrinkles on the coating surface were controlled to enhance the coating performance. After curing by the LED, excimer, and mercury lamps at energy intensities of 500, 30, and 300 mW/cm2 respectively, the self-wrinkling coating showed excellent surface performance. The self-wrinkling coating represented low gloss of 4.1 GU at 85°, high hardness of 4H. Interestingly, the coating surface had a high hydrophobicity (104.5°) and low surface energy (29-30 mN/m) and low coefficient (COF) of friction (0.1-0.2), which were consistent with those of the human skin surface. Besides, the wrinkled structure also improved the thermal stability of the coating samples. This study provided a promising technique for the mass production of self-wrinkling coatings that could be used in wood-based panels, furniture, and leather.

MXene-Enabled Pneumatic Multiscale Shape Morphing for Adaptive, Programmable and Multimodal Radar-infrared Compatible Camouflage

Achieving radar-infrared compatible camouflage with dynamic adaptability has been a long-sought goal, but faces significant challenges owing to the limited dispersion relations of conventional material systems operating in different wavelength ranges. Here, this work proposes the concept of pneumatic multiscale shape morphing and design a periodically arranged pneumatic unit consisting of MXene-based morphable conductors and intake platforms. During gas actuation, the morphable conductor transforms centimeter-scale 2D flat sheets into 3D balloon shapes to enhance microwave absorption behavior, and also reconfigures micrometer-scale MXene wrinkles into smooth planes in combination with cavity-induced low heat transfer to minimize infrared (IR) signatures. Through theory-guided reverse engineering, the final pneumatic matrix shows remarkable frequency tunability (2.64-18.0 GHz), moderate IR emissivity regulation (0.14 at 7-16.5 µm), rapid responsiveness (≈30 ms), wide-angle operation (>45°), and excellent environmental tolerance. Additionally, the multiplexed pneumatic matrix enables over 14 programmable coding sequences that independently alter thermal radiation without compromising radar stealth, and allows multimodal camouflage switching between three distinct compatible states. The approach may facilitate the evolution of camouflage techniques and electromagnetic functional materials toward multispectral, adaptability and intelligence.

Photochemical Design for Diverse Controllable Patterns in Self-Wrinkling Films

Harnessing the spontaneous surface instability of pliable substances to create intricate, well-ordered, and on-demand controlled surface patterns holds great potential for advancing applications in optical, electrical, and biological processes. However, the current limitations stem from challenges in modulating multidirectional stress fields and diverse boundary environments. Herein, this work proposes a universal strategy to achieve arbitrarily controllable wrinkle patterns via the spatiotemporal photochemical boundaries. Utilizing constraints and inductive effects of the photochemical boundaries, the multiple coupling relationship is accomplished among the light fields, stress fields, and morphology of wrinkles in photosensitive polyurethane (PSPU) film. Moreover, employing sequential light-irradiation with photomask enables the attainment of a diverse array of controllable patterns, ranging from highly ordered 2D patterns to periodic or intricate designs. The fundamental mechanics of underlying buckling and the formation of surface features are comprehensively elucidated through theoretical stimulation and finite element analysis. The results reveal the evolution laws of wrinkles under photochemical boundaries and represent a new effective toolkit for fabricating intricate and captivating patterns in single-layer films.

Deformation-Induced Photoprogrammable Pattern of Polyurethane Elastomers Based on Poisson Effect

Elastomers with high aspect ratio surface patterns are a promising class of materials for designing soft machines in the future. Here, a facile method for fabricating surface patterns on polyurethane elastomer by subtly utilizing the Poisson effect and gradient photocrosslinking is demonstrated. By applying uniaxial tensile strains, the aspect ratio of the surface patterns can be optionally manipulated. At prestretched state, the pattern on the polyurethane elastomer can be readily constructed through compressive stress, resulting from the gradient photocrosslinking via selective photodimerization of an anthracene-functionalized polyurethane elastomer (referred to as ANPU). The macromolecular aggregation structures during stretching deformation significantly contribute to the fabrication of high aspect ratio surface patterns. The insightful finite element analysis well demonstrates that the magnitude and distribution of internal stress in the ANPU elastomer can be regulated by selectively gradient crosslinking, leading to polymer chains migrate from the exposed region to the unexposed region, thereby generating a diverse array of surface patterns. Additionally, the periodic surface patterns exhibit tunable structural color according to the different stretching states and are fully reversible over multiple cycles, opening up avenues for diverse applications such as smart displays, stretchable strain sensors, and anticounterfeiting devices.

Effect of Feature Shape and Dimension of a Confinement Geometry on Selectivity of Electrocatalytic CO2 Reduction

The local confinement effect, which can generate a high concentration of hydroxide ions and reaction intermediates near the catalyst surface, is an important strategy for converting CO2 into multi-carbon products in electrocatalytic CO2 reduction. Therefore, understanding how the shape and dimension of the confinement geometry affect the product selectivity is crucial. In this study, we report for the first time the effect of the shape (degree of confinement) and dimension of the confined space on the product selectivity without changing the intrinsic property of Cu. We demonstrate that geometry influences the outcomes of products, such as CH4 , C2 H4 , and EtOH, in different ways: the selectivity of CH4 and EtOH is affected by shape, while the selectivity of C2 H4 is influenced by dimension of geometry predominantly. These phenomena are demonstrated, both experimentally and through simulation, to be induced by the local confinement effect within the confined structure. Our geometry model could serve as basis for designing the confined structures tailored for the production of specific products.

Geometry-structure models for liquid crystal interfaces, drops and membranes: wrinkling, shape selection and dissipative shape evolution

We review our recent contributions to anisotropic soft matter models for liquid crystal interfaces, drops and membranes, emphasizing validations with experimental and biological data, and with related theory and simulation literature. The presentation aims to illustrate and characterize the rich output and future opportunities of using a methodology based on the liquid crystal-membrane shape equation applied to static and dynamic pattern formation phenomena. The geometry of static and kinetic shapes is usually described with dimensional curvatures that co-mingle shape and curvedness. In this review, we systematically show how the application of a novel decoupled shape-curvedness framework to practical and ubiquitous soft matter phenomena, such as the shape of drops and tactoids and bending of evolving membranes, leads to deeper quantitative insights than when using traditional dimensional mean and Gaussian curvatures. The review focuses only on (1) statics of wrinkling and shape selection in liquid crystal interfaces and membranes; (2) kinetics and dissipative dynamics of shape evolution in membranes; and (3) computational methods for shape selection and shape evolution; due to various limitations other important topics are excluded. Finally, the outlook follows a similar structure. The main results include: (1) single and multiple wavelength corrugations in liquid crystal interfaces appear naturally in the presence of surface splay and bend orientation distortions with scaling laws governed by ratios of anchoring-to-isotropic tension energy; adding membrane elasticity to liquid crystal anchoring generates multiple scales wrinkling as in tulips; drops of liquid crystals encapsulates in membranes can adopt, according to the ratios of anchoring/tension/bending, families of shapes as multilobal, tactoidal, and serrated as observed in biological cells. (2) Mapping the liquid crystal director to a membrane unit normal. The dissipative shape evolution model with irreversible thermodynamics for flows dominated by bending rates, yields new insights. The model explains the kinetic stability of cylinders, while spheres and saddles are attractors. The model also adds to the evolving understanding of outer hair cells in the inner ear. (3) Computational soft matter geometry includes solving shape equations, trajectories on energy and orientation landscapes, and shape-curvedness evolutions on entropy production landscape with efficient numerical methods and adaptive approaches.

Indentation induces instantaneous nuclear stiffening and unfolding of nuclear envelope wrinkles

The nuclear envelope (NE) separates genomic DNA from the cytoplasm and regulates transport between the cytosol and the nucleus in eukaryotes. Nuclear stiffening enables the cell nucleus to protect itself from extensive deformation, loss of NE integrity, and genome instability. It is known that the reorganization of actin, lamin, and chromatin can contribute to nuclear stiffening. In this work, we show that structural alteration of NE also contributes to instantaneous nuclear stiffening under indentation. In situ mechanical characterization of cell nuclei in intact cells shows that nuclear stiffening and unfolding of NE wrinkles occur simultaneously at the indentation site. A positive correlation between the initial state of NE wrinkles, the unfolding of NE wrinkles, and the stiffening ratio (stiffness fold-change) is found. Additionally, NE wrinkles unfold throughout the nucleus outside the indentation site. Finite element simulation, which involves the purely passive process of structural unfolding, shows that unfolding of NE wrinkles alone can lead to an increase in nuclear stiffness and a reduction in stress and strain levels. Together, these results provide a perspective on how cell nucleus adapts to mechanical stimuli through structural alteration of the NE.

Laser Interference Lithography-A Method for the Fabrication of Controlled Periodic Structures

A microstructure determines macro functionality. A controlled periodic structure gives the surface specific functions such as controlled structural color, wettability, anti-icing/frosting, friction reduction, and hardness enhancement. Currently, there are a variety of controllable periodic structures that can be produced. Laser interference lithography (LIL) is a technique that allows for the simple, flexible, and rapid fabrication of high-resolution periodic structures over large areas without the use of masks. Different interference conditions can produce a wide range of light fields. When an LIL system is used to expose the substrate, a variety of periodic textured structures, such as periodic nanoparticles, dot arrays, hole arrays, and stripes, can be produced. The LIL technique can be used not only on flat substrates, but also on curved or partially curved substrates, taking advantage of the large depth of focus. This paper reviews the principles of LIL and discusses how the parameters, such as spatial angle, angle of incidence, wavelength, and polarization state, affect the interference light field. Applications of LIL for functional surface fabrication, such as anti-reflection, controlled structural color, surface-enhanced Raman scattering (SERS), friction reduction, superhydrophobicity, and biocellular modulation, are also presented. Finally, we present some of the challenges and problems in LIL and its applications.

On the Performance of a Ready-to-Use Electrospun Sulfonated Poly(Ether Ether Ketone) Membrane Adsorber

Motivated by the need for efficient purification methods for the recovery of valuable resources, we developed a wire-electrospun membrane adsorber without the need for post-modification. The relationship between the fiber structure, functional-group density, and performance of electrospun sulfonated poly(ether ether ketone) (sPEEK) membrane adsorbers was explored. The sulfonate groups enable selective binding of lysozyme at neutral pH through electrostatic interactions. Our results show a dynamic lysozyme adsorption capacity of 59.3 mg/g at 10% breakthrough, which is independent of the flow velocity confirming dominant convective mass transport. Membrane adsorbers with three different fiber diameters (measured by SEM) were fabricated by altering the concentration of the polymer solution. The specific surface area as measured with BET and the dynamic adsorption capacity were minimally affected by variations in fiber diameter, offering membrane adsorbers with consistent performance. To study the effect of functional-group density, membrane adsorbers from sPEEK with different sulfonation degrees (52%, 62%, and 72%) were fabricated. Despite the increased functional-group density, the dynamic adsorption capacity did not increase accordingly. However, in all presented cases, at least a monolayer coverage was obtained, demonstrating ample functional groups available within the area occupied by a lysozyme molecule. Our study showcases a ready-to-use membrane adsorber for the recovery of positively charged molecules, using lysozyme as a model protein, with potential applications in removing heavy metals, dyes, and pharmaceutical components from process streams. Furthermore, this study highlights factors, such as fiber diameter and functional-group density, for optimizing the membrane adsorber's performance.

Reconfigurable mechano-responsive soft film for adaptive visible and infrared dual-band camouflage

Learning from nature in terms of the camouflage used by species has enabled the continuous development of camouflage technologies for the visible to mid-infrared bands to prevent objects from being detected by sophisticated multispectral detectors, thereby avoiding potential threats. However, achieving visible and infrared dual-band camouflage without destructive interference while also realizing rapidly responsive adaptivity to the varying background remains challenging for high-demand camouflage systems. Here, we report a reconfigurable mechano-responsive soft film for dual-band camouflage. Its modulation ranges for visible transmittance and longwave infrared emittance can be up to 66.3% and 21%, respectively. Rigorous optical simulations are performed to elucidate the modulation mechanism of dual-band camouflage and identify the optimal wrinkles required to achieve the goal. The broadband modulation capability (figure of merit) of the camouflage film can be as high as 2.91. Other advantages, such as simple fabrication and a fast response, make this film a potential candidate for dual-band camouflage that can adapt to diverse environments.

Surface manipulation for prevention of migratory viscous crude oil fouling in superhydrophilic membranes

Here, we present a proactive fouling prevention mechanism that endows superhydrophilic membranes with antifouling capability against migratory viscous crude oil fouling. By simulating the hierarchical architecture/chemical composition of a dahlia leaf, a membrane surface is decorated with wrinkled-pattern microparticles, exhibiting a unique proactive fouling prevention mechanism based on a synergistic hydration layer/steric hindrance. The density functional theory and physicochemical characterizations demonstrate that the main chains of the microparticles are bent towards Fe³⁺ through coordination interactions to create nanoscale wrinkled patterns on smooth microparticle surfaces. Nanoscale wrinkled patterns reduce the surface roughness and increase the contact area between the membrane surface and water molecules, expanding the steric hindrance between the oil molecules and membrane surface. Molecular dynamic simulations reveal that the water-molecule densities and strengths of the hydrogen bonds are higher near the resultant membrane surface. With this concept, we can successfully inhibit the initial adhesion, migration, and deposition of oil, regardless of the viscosity, on the membrane surface and achieve migratory viscous crude oil antifouling. This research on the PFP mechanism opens pathways to realize superwettable materials for diverse applications in fields related to the environment, energy, health, and beyond.

Electrochemical Oxidation to Fabricate Micro-Nano-Scale Surface Wrinkling of Liquid Metals

Constructing wrinkled structures on the surface of materials to obtain new functions has broad application prospects. Here a generalized method is reported to fabricate multi-scale and diverse-dimensional oxide wrinkles on liquid metal surfaces by an electrochemical anodization method. The oxide film on the surface of the liquid metal is successfully thickened to hundreds of nanometers by electrochemical anodization, and then the micro-wrinkles with height differences of several hundred nanometers are obtained by the growth stress. It is succeeded in altering the distribution of growth stress by changing the substrate geometry to induce different wrinkle morphologies, such as one-dimensional striped wrinkles and two-dimensional labyrinth wrinkles. Further, radial wrinkles are obtained under the hoop stress induced by the difference in surface tensions. These hierarchical wrinkles of different scales can exist on the liquid metal surface simultaneously. Surface wrinkles of liquid metal may have potential applications in the future for flexible electronics, sensors, displays, and so on.

Reversible adhesives with controlled wrinkling patterns for programmable integration and discharging

Switchable and minimally invasive tissue adhesives have great potential for medical applications. However, on-demand adherence to and detachment from tissue surfaces remain difficult. We fabricated a switchable hydrogel film adhesive by designing pattern-tunable wrinkles to control adhesion. When adhered to a substrate, the compressive stress generated from the bilayer system leads to self-similar wrinkling patterns at short and long wavelengths, regulating the interfacial adhesion. To verify the concept and explore its application, we established a random skin flap model, which is a crucial strategy for repairing severe or large-scale wounds. Our hydrogel adhesive provides sufficient adhesion for tissue sealing and promotes neovascularization at the first stage, and then gradually detaches from the tissue while a dynamic wrinkling pattern transition happens. The gel film can be progressively ejected out from the side margins after host-guest integration. Our findings provide insights into tunable bioadhesion by manipulating the wrinkling pattern transition.

Strain-Insensitive Stretchable Fiber Conductors Based on Highly Conductive Buckled Shells for Wearable Electronics

Based on their high applicability to wearable electronics, fiber-based stretchable electronics have been developed via different strategies. However, the electrical conductivity of a fiber electrode is severely degraded, following deformation upon stretching. Despite the introduction of conductive buckled structures to resolve this issue, there still exist limitations regarding the simultaneous realizations of high conductivity and stretchability. Here, we exploit the dense distribution of the Ag nanoparticle (AgNP) network in polyurethane (PU) to fabricate a strain-insensitive stretchable fiber conductor comprising highly conductive buckled shells via a facile chemical process. These buckled AgNPs/PU fibers exhibit stable and reliable electrical responses across a wide range (tensile strain = ∼200%), in addition to their high electrical conductivity (26,128 S/m) and quality factor (Q = 2.29). Particularly, the negligible electrical hysteresis and excellent durability (>10,000 stretching-releasing cycles) of the fibers demonstrate their high applicability to wearable electronics. Furthermore, we develop buckled fiber-based pH sensors exhibiting stable, repeatable, and highly distinguishable responses (changing pH is from 4 to 8, response time is 5-6 s) even under 100% tensile strain. The buckled AgNPs/PU fibers represent a facile strategy for maintaining the stable electrical performances of fiber electrodes across the strain range of human motion for wearable applications.

Soft Deployable Structures via Core-Shell Inflatables

Deployable structures capable of significant geometric reconfigurations are ubiquitous in nature. While engineering contraptions typically comprise articulated rigid elements, soft structures that experience material growth for deployment mostly remain the handiwork of biology, e.g., when winged insects deploy their wings during metamorphosis. Here we perform experiments and develop formal models to rationalize the previously unexplored physics of soft deployable structures using core-shell inflatables. We first derive a Maxwell construction to model the expansion of a hyperelastic cylindrical core constrained by a rigid shell. Based on these results, we identify a strategy to obtain synchronized deployment in soft networks. We then show that a single actuated element behaves as an elastic beam with a pressure-dependent bending stiffness which allows us to model complex deployed networks and demonstrate the ability to reconfigure their final shape. Finally, we generalize our results to obtain three-dimensional elastic gridshells, demonstrating our approach's applicability to assemble complex structures using core-shell inflatables as building blocks. Our results leverage material and geometric nonlinearities to create a low-energy pathway to growth and reconfiguration for soft deployable structures.

Curvature in Biological Systems: Its Quantification, Emergence, and Implications across the Scales

Surface curvature both emerges from, and influences the behavior of, living objects at length scales ranging from cell membranes to single cells to tissues and organs. The relevance of surface curvature in biology is supported by numerous experimental and theoretical investigations in recent years. In this review, first, a brief introduction to the key ideas of surface curvature in the context of biological systems is given and the challenges that arise when measuring surface curvature are discussed. Giving an overview of the emergence of curvature in biological systems, its significance at different length scales becomes apparent. On the other hand, summarizing current findings also shows that both single cells and entire cell sheets, tissues or organisms respond to curvature by modulating their shape and their migration behavior. Finally, the interplay between the distribution of morphogens or micro-organisms and the emergence of curvature across length scales is addressed with examples demonstrating these key mechanistic principles of morphogenesis. Overall, this review highlights that curved interfaces are not merely a passive by-product of the chemical, biological, and mechanical processes but that curvature acts also as a signal that co-determines these processes.

Efficient Fabrication of Carbon Nanotube-Based Stretchable Electrodes for Flexible Electronic Devices

Stretchable electrodes are highly demanded in various wearable and flexible electronic devices, whereas the efficient fabrication approach is still a challenge. In this work, an efficient shrinking method to fabricate carbon nanotube (CNT)-based stretchable electrodes is proposed. The electrode is a layer of anisotropic CNT wrinkling film coated on a latex balloon substrate (CNT@latex), whose resistivity remains stable after 25 000 stretching cycles of 0 to 50% tensile strain, and can survive up to 500% tensile train. The highly conductive electrode can be used as the current collector of a stretchable Zinc-ion battery, maintaining an output voltage of 1.3 V during the stretching process of 0 to 100%. The applications of the electrode in flexible triboelectric nanogenerators and Joule heating devices are also demonstrated, further indicating their good prospects in the field of stretchable electronic devices.

Environmentally Responsive Materials for Building Envelopes: A Review on Manufacturing and Biomimicry-Based Approaches

Buildings must adapt and respond dynamically to their environment to reduce their energy loads and mitigate environmental impacts. Several approaches have addressed responsive behavior in buildings, such as adaptive and biomimetic envelopes. However, biomimetic approaches lack sustainability consideration, as conducted in biomimicry approaches. This study provides a comprehensive review of biomimicry approaches to develop responsive envelopes, aiming to understand the connection between material selection and manufacturing. This review of the last five years of building construction and architecture-related studies consisted of a two-phase search query, including keywords that answered three research questions relating to the biomimicry and biomimetic-based building envelopes and their materials and manufacturing and excluding other non-related industrial sectors. The first phase focused on understanding biomimicry approaches implemented in building envelopes by reviewing the mechanisms, species, functions, strategies, materials, and morphology. The second concerned the case studies relating to biomimicry approaches and envelopes. Results highlighted that most of the existing responsive envelope characteristics are achievable with complex materials requiring manufacturing processes with no environmentally friendly techniques. Additive and controlled subtractive manufacturing processes may improve sustainability, but there is still some challenge to developing materials that fully adapt to large-scale and sustainability needs, leaving a significant gap in this field.

Wrinkle nanostructures generate a novel form of blue structural color in great argus flight feathers

Currently known structural colors in feathers are caused by light scattering from periodic or amorphous arrangements of keratin, melanin, and air within barbs and barbules that comprise the feather vane. Structural coloration in the largest part of the feather, the central rachis, is rare. Here, we report on an investigation of the physical mechanisms underlying the only known case of structural coloration in the rachis, the blue rachis of great argus (Argusianus argus) flight feathers. Spectrophotometry revealed a reflectance peak at 344 nm that is diffuse and well matched to the blue and UV-sensitive cone sensitivities of this species' visual system. A combination of electron microscopy and optical modeling confirmed blue coloration is generated by scattering from amorphous wrinkle nanostructures 125 nm deep and 385 nm apart, a new avian coloration mechanism. These findings have implications for understanding how novel courtship phenotypes arise through evolutionary modification of existing ontogenetic templates.

3D Flexible SERS Substrates Integrated with a Portable Raman Analyzer and Wireless Communication for Point-of-Care Application

With the development of flexible surface-enhanced Raman spectroscopy (SERS) substrates that can realize rapid in situ detection, the SERS technique accompanied by miniaturized Raman spectrometers holds great promise for point-of-care testing (POCT). For an in situ detection strategy, constructing high-performance flexible and transparent SERS substrates through a facile and cost-effective fabrication method is critically important. Herein, we present a simple method for fabricating a large-area flexible and transparent SERS substrate consisting of a silver-nanoparticle-grafted wrinkled polydimethylsiloxane (Ag NPs@W-PDMS) film, using a surface-wrinkling technique and magnetron sputtering technology. By characterizing rhodamine 6G as a probe molecule with a portable Raman spectrometer, the flexible SERS substrate shows a low detection limit (10^-7 M), a high enhancement factor (6.11 × 10⁶), and excellent spot-spot and batch-batch reproducibilities (9.0% and 4.2%, respectively). Moreover, the Ag NPs@W-PDMS substrate maintains high SERS activity under bending and twisting mechanical deformations of over 100 cycles, as well as storage in air for 30 days. To evaluate its practical feasibility, in situ detection of malachite green on apple and tomato peels is performed with a detection limit of 10^-6 M. In addition, for point-of-care analysis, we develop a wireless transmission system to transmit the collected SERS spectral data to a computer in real time for signal processing and analysis. Therefore, the proposed Ag NPs@W-PDMS SERS substrate fabricated through a simple and mass-producible method, combined with the utilization of a portable Raman spectrometer and wireless communication, offers a promising opportunity to extend the SERS technique from the laboratory to POCT applications.

Controllable Buckle Delaminations in Polymer-Supported Periodic Gradient Films by Mechanical Compression

Surface instabilities including wrinkles and buckle-delaminations are widespread in nature and can be found in a wide range of practical applications. Compared with the homogeneous wrinkle mode, the buckle-delaminations are spontaneously stress-localized, and their initiation positions and geometrical parameters are hardly precisely controlled by a simple method. Here, we report on the controllable buckle-delaminations in periodic thickness-gradient metal films on polydimethylsiloxane (PDMS) substrates by uniaxial mechanical compression. It is found that a periodic thickness-gradient film is spontaneously formed by masking a copper grid during deposition. The released mechanical strain tends to concentrate in thinner film regions, resulting in the restricted growth of buckle-delaminations. The geometrical features, evolutional behaviors, and underlying physical mechanisms of such buckle-delaminations are analyzed and discussed in detail based on the buckling model and finite element simulations. This work would provide a better understanding of the restricted buckle-delaminations in heterogeneous film-substrate systems and controllable fabrication of ordered structural arrays by copper grid masking and mechanical loading.

Patterned Aluminum/Polydimethylsiloxane-Laminated Film for a Solvent-Driven Soft Actuator with Programmable and Multistable Shape Morphing

Recently, soft actuators capable of deforming in predictable ways under external stimuli have attracted increasing attention by showing great potential in emerging industries. However, limited efforts are being spent on the untethered actuators with multistable deformations. Also, there is a lack of mechanically guiding design principles for multistable structures. Here, the patterned aluminum/polydimethylsiloxane (Al/PDMS)-laminated films with surface wrinkles are fabricated by magnetron sputtering the Al layer on the PDMS substrate. By tuning the geometric parameters and surface constraints of the patterned Al/PDMS-laminated films, a series of solvent-driven actuators with multiform stable configurations (such as monostable arc, multistable cylinder, and monostable/bistable spiral) are proposed. The deformation mechanism is revealed using a linear elastic theory. Combined with the finite element analysis method, the deformations of Al/PDMS-laminated films with different surface constraints and geometric configurations are visually predicted. Besides, we modulate the deformation of different parts of the Z-shaped actuators by tuning the surface constraints in different regions of the Z-shaped Al/PDMS bilayer films to achieve multiple stable deformations in a single actuator. The concept offers a huge design scope for reconfigurable soft robots. Finally, two bionic applications are proposed to demonstrate the practical applications of the soft solvent-driven actuator based on the patterned Al/PDMS films in artificial muscles and bionic robotics. This work provides a strategy for the design and fabrication of programmable and controllable soft actuators, laying the foundation for a wide range of applications in smart materials.

3D printing of nanowrinkled architectures via laser direct assembly

Structural wrinkles in nature have been widely imitated to enhance the surface functionalities of objects, especially three-dimensional (3D) architectured wrinkles, holding promise for emerging applications in mechanical, electrical, and biological processes. However, the fabrication of user-defined 3D nanowrinkled architectures is a long-pending challenge. Here, we propose a bottom-up laser direct assembly strategy to fabricate multidimensional nanowrinkled architectures in a single-material one-step process. Through the introduction of laser-induced thermal transition into a 3D nanoprinting process for leading the point-by-point nanoscale wrinkling and the self-organization of wrinkle structures, we have demonstrated the program-controlled and on-demand fabrication of multidimensional nanowrinkled structures. Moreover, the precise control of wrinkle morphology with an optimal wavelength of 40 nanometers and the regulation of the dynamic transformation of wrinkled cellular microstructures via interfacial stress mismatch engineering have been achieved. This study provides a universal protocol for constructing nearly arbitrary nanowrinkled architectures and facilitates a new paradigm in nanostructure manufacturing.

Hierarchical Wrinkles for Tunable Strain Sensing Based on Programmable, Anisotropic, and Patterned Graphene Hybrids

Flexible, stretchable, wearable, and stable electronic materials are widely studied, owing to their applications in wearable devices and the Internet of Things. Because of the demands for both strain-insensitive resistors and high gauge factor (GF) strain-sensitive materials, anisotropic strain sensitivity has been an important aspect of electronic materials. In addition, the materials should have adjustable strain sensitivities. In this work, such properties are demonstrated in reduced graphene oxide (RGO) with hierarchical oriented wrinkle microstructures, generated using the two-step shrinkage of a rubber substrate. The GF values range from 0.15 to 28.32 at 100% strain. For device demonstrations, macrostructure patterns are designed to prepare patterned wrinkling graphene at rubber substrate (PWG@R). Serpentiform curves can be used for the constant-value resistor, combined with the first-grade wrinkles. Strip lines can increase the strain-sensing property, along with the second-grade wrinkles. The patterned sensor exhibits improved GF values range from 0.05 to 49.5. The assembled sensor shows an excellent stability (>99% retention after 600 cycles) with a high GF (49.5). It can monitor the vital signs of the throat and wrist and sense large motions of fingers. Thus, PWG@R-based strain sensors have great potential in various health or motion monitoring fields.

Ultrasonic-Assisted Deposition Method for Creating Conductive Wrinkles on PDMS Surfaces

Harnessing surface wrinkle surfaces in various functional devices has been a hot topic. However, rapidly creating wrinkled surfaces on elastomers of arbitrary shape (especially curved surfaces) is still a great challenge. In this work, an ultrasonic-assisted deposition method has been proposed to achieve nanomodification of the robust layer (e.g., carbon nanotubes (CNTs)) with a labyrinth wrinkle pattern on polydimethylsiloxane (PDMS) fiber, sheet, and porous sponge. It is found that the swelling effect of the dispersion and the ultrasonic treatment play vital roles in the surface wrinkling. As a demonstration, the conductive wrinkled CNTs@PDMS fibers were assembled as stretchable strain sensors. The initial conductivity and the strain-sensing performances could be well tuned by simply adjusting the ultrasonic treatment time. The wrinkled CNTs@PDMS fiber strain sensor exhibited remarkable stretchability (ca. 300%) and good sensitivity, which can be applied in various human motion detection, voice recognition, and air-flow monitoring. It is also expected that the facile ultrasonic-assisted deposition method for surface wrinkling can be extended to fabricate various smart devices with promoted performances.

Probing the growth and mechanical properties of Bacillus subtilis biofilms through genetic mutation strategies

Bacterial communities form biofilms on various surfaces by synthesizing a cohesive and protective extracellular matrix, and these biofilms protect microorganisms against harsh environmental conditions. Bacillus subtilis is a widely used experimental species, and its biofilms are used as representative models of beneficial biofilms. Specifically, B. subtilis biofilms are known to be rich in extracellular polymeric substances (EPS) and other biopolymers such as DNA and proteins like the amyloid protein TasA and the hydrophobic protein BslA. These materials, which form an interconnected, cohesive, three-dimensional polymer network, provide the mechanical stability of biofilms and mediate their adherence to surfaces among other functional contributions. Here, we explored how genetically-encoded components specifically contribute to regulate the growth status, mechanical properties, and antibiotic resistance of B. subtilis biofilms, thereby establishing a solid empirical basis for understanding how various genetic engineering efforts are likely to affect the structure and function of biofilms. We noted discrete contributions to biofilm morphology, mechanical properties, and survival from major biofilm components such as EPS, TasA and BslA. For example, EPS plays an important role in maintaining the stability of the mechanical properties and the antibiotic resistance of biofilms, whereas BslA has a significant impact on the resolution that can be obtained for printing applications. This work provides a deeper understanding of the internal interactions of biofilm components through systematic genetic manipulations. It thus not only broadens the application prospects of beneficial biofilms, but also serves as the basis of future strategies for targeting and effectively removing harmful biofilms.

Strong and tough self-wrinkling polyelectrolyte hydrogels constructed via a diffusion-complexation strategy

Self-wrinkling hydrogels enable various engineering and biomedical applications. The major challenge is to couple the self-wrinkling technologies and enhancement strategies, so as to get rid of the poor mechanical properties of existing self-wrinkling gels. Herein we present a facile diffusion-complexation strategy for constructing strong and ultratough self-wrinkling polyelectrolyte hydrogels with programmable wrinkled structures and customizable 3D configurations. Driven by the diffusion of low-molecular-weight chitosan polycations into the polyanion hydrogels, the high-modulus polyelectrolyte complexation shells can form directly on the hydrogel surface. Meanwhile, the polyanion hydrogels deswell/shrink due to the low osmotic pressure, which applies an isotropous surface compressive stress for inducing the formation of polygonal wrinkled structures. When the diffusion-complexation reaction occurs on a pre-stretched hydrogel sheet, the long-range ordered wrinkled structures can form during the springback/recovery of the hydrogel matrix. Moreover, through controlling the regions of diffusion-complexation reaction on the pre-stretched hydrogels, they can be spontaneously transformed into various 3D configurations with ordered wrinkled structures. Notably, because of the introduction of plenty of electrostatic binding (i.e., sacrificial bonds), the as-prepared self-wrinkling gels possess outstanding mechanical properties, far superior to the reported ones. This diffusion-complexation strategy paves the way for the on-demand design of high-performance self-wrinkling hydrogels.

Tip-Induced In-Plane Ferroelectric Superstructure in Zigzag-Wrinkled BaTiO3 Thin Films

The complex micro-/nanoscale wrinkle morphology primarily fabricated by elastic polymers is usually designed to realize unique functionalities in physiological, biochemical, bioelectric, and optoelectronic systems. In this work, we fabricated inorganic freestanding BaTiO₃ ferroelectric thin films with zigzag wrinkle morphology and successfully modulated the ferroelectric domains to form an in-plane (IP) superstructure with periodic surface charge distribution. Our piezoresponse force microscopy (PFM) measurements and phase-field simulation demonstrate that the self-organized strain/stress field in the zigzag-wrinkled BaTiO₃ film generates a corresponding pristine domain structure. These domains can be switched by tip-induced strain gradient (flexoelectricity) and naturally form a robust and unique "braided" in-plane domain pattern, which enables us to offer an effective and convenient way to create a microscopic ferroelectric superstructure. The corresponding periodic surface potential distribution provides an extra degree of freedom in addition to the morphology that could regulate cells or polar molecules in physiological and bioelectric applications.

Pattern selection of directionally oriented chitosan tubes

The growth of viscoelastic curved materials, inspired by biological systems, may give rise to various complex structures. One of the simplest ways to control the pattern formation is to vary the orientation of the reaction vessel while keeping all other experimental conditions constant. Here, we report the self-organization of soft chitosan tubes by injecting acidic chitosan sol into a pool of sodium hydroxide solution, where the adhesive force between the gel and container keeps the tubules on the bottom of the reactor. The horizontal growth of the tubular structure undergoes spontaneous symmetry breaking, where instabilities develop on the surface of the chitosan tubules. Transformation of folds into wrinkles and finally to a smooth tube takes place by varying the orientation of the container. In addition to characterizing the evolving structures, we have also shown that the linear growth rate of the tube scales with the tilt angle of the container from the horizontal.

Highly Flexible and Broad-Range Mechanically Tunable All-Wood Hydrogels with Nanoscale Channels via the Hofmeister Effect for Human Motion Monitoring

Wood-based hydrogel with a unique anisotropic structure is an attractive soft material, but the presence of rigid crystalline cellulose in natural wood makes the hydrogel less flexible. In this study, an all-wood hydrogel was constructed by cross-linking cellulose fibers, polyvinyl alcohol (PVA) chains, and lignin molecules through the Hofmeister effect. The all-wood hydrogel shows a high tensile strength of 36.5 MPa and a strain up to ~ 438% in the longitudinal direction, which is much higher than its tensile strength (~ 2.6 MPa) and strain (~ 198%) in the radial direction, respectively. The high mechanical strength of all-wood hydrogels is mainly attributed to the strong hydrogen bonding, physical entanglement, and van der Waals forces between lignin molecules, cellulose nanofibers, and PVA chains. Thanks to its excellent flexibility, good conductivity, and sensitivity, the all-wood hydrogel can accurately distinguish diverse macroscale or subtle human movements, including finger flexion, pulse, and swallowing behavior. In particular, when "An Qi" was called four times within 15 s, two variations of the pronunciation could be identified. With recyclable, biodegradable, and adjustable mechanical properties, the all-wood hydrogel is a multifunctional soft material with promising applications, such as human motion monitoring, tissue engineering, and robotics materials.

Synthetic Strategies for Polymer Particles with Surface Concavities

Over the past decade or so, there has been increasing interest in the synthesis of polymer particles with surface concavities, which mainly include golf ball-like, dimpled and surface-wrinkled polymer particles. Such syntheses generally can be classified into direct polymerization and post-treatment on preformed polymer particles. This review aims to provide an overview of the synthetic strategies of such particles. Some selected examples are given to present the formation mechanisms of the surface concavities. The applications and future development of these concave polymer particles are also briefly discussed. This article is protected by copyright. All rights reserved.

Tailoring Ordered Wrinkle Arrays for Tunable Surface Performances by Template-Modulated Gradient Films

Complex wrinkled microstructures are ubiquitous in natural systems and living bodies. Although homogeneous wrinkles in film-substrate bilayers have been extensively investigated in the past 2 decades, tailoring heterogeneous wrinkles by a facile method is still a challenge. Here, we report on the controllable heterogeneous wrinkles in template-modulated thickness-gradient metal films sputter-deposited on polydimethylsiloxane substrates. It is found that the stress of the gradient film is strongly position-dependent and the wrinkles are always restricted in thinner film regions. The morphological characteristic and formation mechanism of the heterogeneous wrinkles are analyzed and discussed in detail based on the stress theory. Ordered wrinkle arrays are achieved by adjusting the deposition time, copper grid period, template shape, and lifting height. The surface performances (e.g., the friction property) are well controlled by the wrinkle arrays. This work could promote better understanding of the spontaneously heterogeneous wrinkles in template-modulated gradient films and controllable fabrication of various wrinkle arrays by independently tuning film deposition conditions and template parameters.

Reconfigurable Micro- and Nano-Structured Camouflage Surfaces Inspired by Cephalopods

Wrinkled surfaces and materials are found throughout the natural world in various plants and animals and are known to improve the performance of emerging optical and electrical technologies. Despite much progress, the reversible post-fabrication tuning of wrinkle sizes and geometries across multiple length scales has remained relatively challenging for some materials, and the development of comprehensive structure-function relationships for optically active wrinkled surfaces has often proven difficult. Herein, by drawing inspiration from natural cephalopod skin and leveraging methodologies established for artificial adaptive infrared platforms, we engineer systems with hierarchically reconfigurable wrinkled surface morphologies and dynamically tunable visible-to-infrared spectroscopic properties. Specifically, we demonstrate architectures for which mechanical actuation changes the surface morphological characteristics; modulates the reflectance, transmittance, and absorptance across a broad spectral window; controls the specular-to-diffuse reflectance ratios; and alters the visible and thermal appearances. Moreover, we demonstrate the incorporation of these architectures into analogous electrically actuated appearance-changing devices that feature competitive figures of merit, such as reasonable maximum areal strains, rapid response times, and good stabilities upon repeated actuation. Overall, our findings constitute another step forward in the continued development of cephalopod-inspired light- and heat-manipulating systems and may facilitate advanced applications in the areas of sensing, electronics, optics, soft robotics, and thermal management.

Conformal Self-Assembly of Nanospheres for Light-Enhanced Airtightness Monitoring and Room-Temperature Gas Sensing

The fabrication of conformal nanostructures on microarchitectures is of great significance for diverse applications. Here a facile and universal method was developed for conformal self-assembly of nanospheres on various substrates including convex bumps and concave holes. Hydrophobic microarchitectures could be transferred into superhydrophilic ones using plasma treatment due to the formation of numerous hydroxyl groups. Because of superhydrophilicity, the nanosphere suspension spread on the microarchitectures quickly and conformal self-assembly of nanospheres can be realized. Besides, the feature size of the conformal nanospheres on the substrates could be further regulated by plasma treatment. After transferring two-dimensional tungsten disulfide sheets onto the conformal nanospheres, the periodic nanosphere array was demonstrated to be able to enhance the light harvesting of WS2. Based on this, a light-enhanced room-temperature gas sensor with a fast recovery speed (<35 s) and low detecting limit (500 ppb) was achieved. Moreover, the WS2-covered nanospheres on the microarchitectures were very sensitive to the changes in air pressure due to the formation of suspended sheets on the convex bumps and concave holes. A sensitive photoelectronic pressure sensor that was capable of detecting the airtightness of vacuum devices was developed using the WS2-decorated hierarchical architectures. This work provides a simple method for the fabrication of conformal nanospheres on arbitrary substrates, which is promising for three-dimensional microfabrication of multifunctional hierarchical microarchitectures for diverse applications, such as biomimetic compound eyes, smart wetting surfaces and photonic crystals.

3D Multiscale Micro-/Nanofolds by Femtosecond Laser Intermittent Ablation and Constrained Heating on a Shape Memory Polymer

Spontaneous wrinkling of films with a thickness gradient offers a new opportunity for constructing various 3D hierarchical surface morphologies. Unfortunately, accurately and facilely controlling the gradient film thickness to yield multiscale and 3D hierarchical micro-/nanostructures is still difficult. Here, a rapid, facile, and highly controllable fabricating strategy for realizing 3D multiscale hierarchical micro-/nanofolds on a shape memory polymer (SMP) surface is reported. First, the nanoparticle film with gradient thickness is rapidly (100 ms to 4 s) and facilely obtained by laser intermittent ablation on the SMP, termed as laser ablation-induced gradient thickness film. Following one-time constrained heating, the 3D micropillars grow out of the substrate based on the "self-growing effect," and the nanoparticle gradient film on its top shrinks into multiscale micro-/nanofolds simultaneously. Significantly, the evolution process and the underlying mechanism of the 3D micro-/nanofolds are systematically investigated. Fundamental basis enables us to accurately regulate the gradient thickness of nanoparticle films and feature size of folds by varying laser scanning times and scanning path. Finally, desirable patterns on micro-/nanofolds can be readily realized by programmable laser cleaning technology, and the tunable adhesion of the water droplet on the multiscale structured surface is demonstrated, which is promising for microdroplet manipulation.

Anisotropic, Wrinkled, and Crack-Bridging Structure for Ultrasensitive, Highly Selective Multidirectional Strain Sensors

Flexible multidirectional strain sensors are crucial to accurately determining the complex strain states involved in emerging sensing applications. Although considerable efforts have been made to construct anisotropic structures for improved selective sensing capabilities, existing anisotropic sensors suffer from a trade-off between high sensitivity and high stretchability with acceptable linearity. Here, an ultrasensitive, highly selective multidirectional sensor is developed by rational design of functionally different anisotropic layers. The bilayer sensor consists of an aligned carbon nanotube (CNT) array assembled on top of a periodically wrinkled and cracked CNT-graphene oxide film. The transversely aligned CNT layer bridge the underlying longitudinal microcracks to effectively discourage their propagation even when highly stretched, leading to superior sensitivity with a gauge factor of 287.6 across a broad linear working range of up to 100% strain. The wrinkles generated through a pre-straining/releasing routine in the direction transverse to CNT alignment is responsible for exceptional selectivity of 6.3, to the benefit of accurate detection of loading directions by the multidirectional sensor. This work proposes a unique approach to leveraging the inherent merits of two cross-influential anisotropic structures to resolve the trade-off among sensitivity, selectivity, and stretchability, demonstrating promising applications in full-range, multi-axis human motion detection for wearable electronics and smart robotics.

Spontaneous Wrinkle Formation on Hydrogel Surfaces Using Photoinitiator Diffusion from Oil-Water Interface

Patterning wrinkles on three-dimensional curved or enclosed surfaces can be challenging due to difficulties in application of uniform films and stresses on such structures. In this study, we demonstrate a simple one-step wrinkle-formation method on various hydrogel structures utilizing the oil-water interfaces. By diffusion of the photoinitiator from the oil phase to the prepolymer solution in water through the interface, a characteristic cross-linking gradient is set up in the hydrogel. Then, after photopolymerization, we observe diverse patterns of wrinkles upon changing the concentration of the hydrogel or photoinitiator. As the wrinkle formation via photoinitiator diffusion through the interface requires only UV exposure for polymerization, while taking advantage of the oil-water interfacial tension, wrinkles can be developed easily on various curved structures. In addition, we illustrate the formation of wrinkles on surfaces underneath another layer of polymer or on completely enclosed surfaces, which is difficult with conventional methods. We expect that our results will lead to production of novel microstructures and provide a platform for studying the morphogenesis of wrinkles found in nature such as in curved substrates and multilayers.

3D Cell Culture: Recent Development in Materials with Tunable Stiffness

It is widely accepted that three-dimensional cell culture systems simulate physiological conditions better than traditional 2D systems. Although extracellular matrix components strongly modulate cell behavior, several studies underlined the importance of mechanosensing in the control of different cell functions such as growth, proliferation, differentiation, and migration. Human tissues are characterized by different degrees of stiffness, and various pathologies (e.g., tumor or fibrosis) cause changes in the mechanical properties through the alteration of the extracellular matrix structure. Additionally, these modifications have an impact on disease progression and on therapy response. Hence, the development of platforms whose stiffness could be modulated may improve our knowledge of cell behavior under different mechanical stress stimuli. In this review, we have analyzed the mechanical diversity of healthy and diseased tissues, and we have summarized recently developed materials with a wide range of stiffness.