Tuning Atomically Dispersed Fe Sites in Metal-Organic Frameworks Boosts Peroxidase-Like Activity for Sensitive Biosensing

Iron-driven self-assembly of dopamine into dumbbell-shaped nanozyme for visual and rapid detection of norfloxacin on a smartphone-assisted platform

Antibiotics in aquatic environments raise health concerns. Therefore, the rapid, on-site, and accurate detection of antibiotic residues is crucial for protecting the environment and human health. Herein, a dumbbell-shaped iron (Fe3+)-dopamine coordination nanozyme (Fe-DCzyme) was developed via an iron-driven self-assembly strategy. It exhibited excellent peroxidase-like activity, which can be quenched by adding l-cysteine to prevent Fe3+/Fe2+ electron transfer but restored by adding norfloxacin. Given the 'On-Off-On' effect of peroxidase-like activity, Fe-DCzyme was used as a colourimetric sensor for norfloxacin detection, and showed a wide linear range from 0.05 to 6.00 μM (R2 = 0.9950) and LOD of 27.0 nM. A portable smartphone-assisted detection platform using Fe-DCzyme was also designed to convert norfloxacin-induced color changes into RGB values as well as to realise the rapid, on-site and quantitative detection of norfloxacin. A good linear relation (0.10-6.00 μM) and high sensitivity (LOD = 79.3 nM) were achieved for the smartphone-assisted Fe-DCzyme detection platform. Its application was verified using norfloxacin spiking methods with satisfactory recoveries (92.66%-119.65%). Therefore, the portable smartphone-assisted Fe-DCzyme detection platform with low cost and easy operation can be used for the rapid, on-site and visual quantitative detection of antibiotic residues in water samples.

Modulating Electron Transfer between Pt and MOF Support through Pd Doping Promotes Nanozyme Catalytic Efficiency

Electron transfer is considered to be a typical parameter that affects the catalytic activity of nanozymes. However, there is still controversy regarding whether higher or lower electron transfer numbers are beneficial for improving the catalytic activity of nanozymes. To address this issue, we propose the introduction of Pd doping as an important electron regulation strategy to tune electron transfer between Pt and ZIF-8 carriers (PtxPd1@ZIF-8). We observe a volcano-shaped relationship between the electron transfer number and catalytic activity, reaching its peak at Pt4Pd1@ZIF-8. Mechanism studies indicate that as the electron transfer number from Pt to ZIF-8 carriers increases, the d-band center of the active site Pt increases, reducing the occupancy of antibonding states and enhancing the adsorption capacity of the key intermediate (*O). However, a further increase in the adsorption of *O energy makes it difficult to desorb and participate in the next reaction, thus exhibiting volcanic activity. The optimized Pt4Pd1@ZIF-8 nanozyme is applied to develop an immunoassay for the detection of zearalenone, achieving a detection limit of 0.01 μg/L, which is 6 times higher than that of the traditional enzyme-linked immunosorbent assay. This work not only reveals the potential regulatory mechanism of electron transfer on the catalytic activity of nanozymes but also improves the performance of nanozyme-based biosensors.

Construction of Interlayer Coupling Diatomic Nanozyme with Peroxidase-Like and Photothermal Activities for Efficient Synergistic Antibacteria

Pathogenic bacteria are the main cause of bacterial infectious diseases, which have posed a grave threat to public health. Single-atom nanozymes have emerged as promising candidates for antibacterial applications, but their activities need to be further improved. Considering diatomic nanozymes exhibit superior metal loading capacities and enhanced catalytic performance, a new interlayer coupling diatomic nanozyme (IC-DAN) is constructed by modulating the coordination environment in an atomic-level engineering. It is well demonstrated that IC-DAN exhibited superior peroxidase-mimetic activity in the presence of H2O2 to yield abundant ∙OH and possessed high photothermal conversion ability, which synergistically achieves efficient antibacterial therapy. Therefore, IC-DAN shows great potential used as antibacterial agent in clinic and this study open a new route to developing high-performance artificial enzymes.

Tailoring the Coordination Environment of Fe/Zn-BDC to Boost Peroxidase-like Activity for Highly Selective Detection of PFOS

Perfluorooctanesulfonic acid potassium salt (PFOS) residues in ecosystems over long periods are of increasing concern and require a selective and stable optical probe for monitoring. Herein, two functional groups (-F and -NH2) with opposite electronic modulation ability were introduced into Fe/Zn-BDC (denoted as Fe/Zn-BDC-F4 and Fe/Zn-BDC-NH2, respectively) to tailor the coordination environment of the Fe metal center, further regulating the nanozyme activity efficiently. Notably, the peroxidase-like activity is related to the coordination environment of the nanozymes and obeys the following order Fe/Zn-BDC-F4 > Fe/Zn-BDC > Fe/Zn-BDC-NH2. Based on the excellent peroxidase-like activity of Fe/Zn-BDC-F4 and the characteristics of being rich in F atoms, a rapid, selective, and visible colorimetric method was developed for detecting PFOS with a detection limit of 100 nM. The detection mechanism was attributed to various interaction forces between Fe/Zn-BDC-F4 and PFOS, including electrostatic interactions, Fe-S interactions, Fe-F bonds, and halogen bonds. This work not only offers new insights into the atomic-scale rational design of highly active nanozymes but also presents a novel approach to detecting PFOS in environmental samples.

Atomic-level design of metalloenzyme-like active pockets in metal-organic frameworks for bioinspired catalysis

Natural metalloenzymes with astonishing reaction activity and specificity underpin essential life transformations. Nevertheless, enzymes only operate under mild conditions to keep sophisticated structures active, limiting their potential applications. Artificial metalloenzymes that recapitulate the catalytic activity of enzymes can not only circumvent the enzymatic fragility but also bring versatile functions into practice. Among them, metal-organic frameworks (MOFs) featuring diverse and site-isolated metal sites and supramolecular structures have emerged as promising candidates for metalloenzymes to move toward unparalleled properties and behaviour of enzymes. In this review, we systematically summarize the significant advances in MOF-based metalloenzyme mimics with a special emphasis on active pocket engineering at the atomic level, including primary catalytic sites and secondary coordination spheres. Then, the deep understanding of catalytic mechanisms and their advanced applications are discussed. Finally, a perspective on this emerging frontier research is provided to advance bioinspired catalysis.

Functionalized nanozyme with drug loading for enhanced tumour combination treatment of catalytic therapy and chemotherapy

Nanozyme-based tumour catalytic therapy has attracted widespread attention in recent years, but the therapeutic efficacy is limited due to the trapping of hydroxyl radicals (˙OH) by endogenous glutathione (GSH) in the tumour microenvironment (TME). Zr/Ce-MOFs/DOX/MnO2 is constructed in this work to serve as a new kind of nanozyme for combination chemotherapy and catalytic treatment. Zr/Ce-MOFs can produce ˙OH in a mimic TME, and the MnO2 on the surface could deplete the GSH, further promoting the ˙OH generation. The pH/GSH dual stimulation accelerates the release of anticancer drug doxorubicin (DOX) in tumour tissue for enhanced tumour chemotherapy. Moreover, Mn2+ produced by the reaction of Zr/Ce-MOFs/DOX/MnO2 and GSH can be used as the contrast agent for T1-MRI. The potential antitumour effect of Zr/Ce-MOFs/DOX/MnO2 is demonstrated by in vitro and in vivo cancer treatment tests. This work thus provides a new nanozyme-based platform for enhanced combination chemotherapy and catalytic treatment for tumours.

Research Progress in Iron-Based Nanozymes: Catalytic Mechanisms, Classification, and Biomedical Applications

Natural enzymes are crucial in biological systems and widely used in biology and medicine, but their disadvantages, such as insufficient stability and high-cost, have limited their wide application. Since Fe₃O₄ nanoparticles were found to show peroxidase-like activity, researchers have designed and developed a growing number of nanozymes that mimic the activity of natural enzymes. Nanozymes can compensate for the defects of natural enzymes and show higher stability with lower cost. Iron, a nontoxic and low-cost transition metal, has been used to synthesize a variety of iron-based nanozymes with unique structural and physicochemical properties to obtain different enzymes mimicking catalytic properties. In this perspective, catalytic mechanisms, activity modulation, and their recent research progress in sensing, tumor therapy, and antibacterial and anti-inflammatory applications are systematically presented. The challenges and perspectives on the development of iron-based nanozymes are also analyzed and discussed.

Balancing "on" and "off" response of hydroxyl groups to a nanozyme-catalyzing system for the construction of an ultra-sensitive and selective "signal-on" detection platform for dopamine

Targeting the functional groups present in analytes by nanozyme-catalyzed systems is a promising strategy to construct sensitive and selective platforms for the sensing of specific analytes. Herein, various groups (-COOH, -CHO, -OH, and -NH₂) on benzene were introduced in an Fe-based nanozyme system with MoS₂-MIL-101(Fe) as the model peroxidase nanozyme, H₂O₂ as the oxidizing agent, and TMB as the chromogenic substrate, and the effects of these groups at both a low concentration and high concentration were further investigated. It was found that the hydroxyl group-based substance catechol showed an "on" effect at a low concentration to increase the catalytic rate and enhance the absorbance signal, whereas an "off" effect at a high concentration with a decreased absorbance signal. Based on these results, the "on" mode and "off" mode for the biological molecule dopamine, a type of catechol derivative, were proposed. In the control system, MoS₂-MIL-101(Fe) catalyzed the decomposition of H₂O₂ to produce ROS, which further oxidized TMB. In the "on" mode, the hydroxyl groups of dopamine could combine with the Fe(iii) site of the nanozyme to lower its oxidation state, resulting in higher catalytic activity. In the "off" mode, the excess dopamine could consume ROS, which inhibited the catalytic process. Under the optimal conditions, by balancing the "on" and "off" modes, the "on" mode for the detection of dopamine was found to have better sensitivity and selectivity. The LOD was as low as 0.5 nM. This detection platform was successfully applied for the detection of dopamine in human serum with satisfactory recovery. Our results can pave the way for the design of nanozyme sensing systems with sensitivity and selectivity.

A Rational Design of Metal-Organic Framework Nanozyme with High-Performance Copper Active Centers for Alleviating Chemical Corneal Burns

Metal-organic frameworks (MOFs) have attracted significant research interest in biomimetic catalysis. However, the modulation of the activity of MOFs by precisely tuning the coordination of metal nodes is still a significant challenge. Inspired by metalloenzymes with well-defined coordination structures, a series of MOFs containing halogen-coordinated copper nodes (Cu-X MOFs, X = Cl, Br, I) are employed to elucidate their structure-activity relationship. Intriguingly, experimental and theoretical results strongly support that precisely tuning the coordination of halogen atoms directly regulates the enzyme-like activities of Cu-X MOFs by influencing the spatial configuration and electronic structure of the Cu active center. The optimal Cu-Cl MOF exhibits excellent superoxide dismutase-like activity with a specific activity one order of magnitude higher than the reported Cu-based nanozymes. More importantly, by performing enzyme-mimicking catalysis, the Cu-Cl MOF nanozyme can significantly scavenge reactive oxygen species and alleviate oxidative stress, thus effectively relieving ocular chemical burns. Mechanistically, the antioxidant and antiapoptotic properties of Cu-Cl MOF are achieved by regulating the NRF2 and JNK or P38 MAPK pathways. Our work provides a novel way to refine MOF nanozymes by directly engineering the coordination microenvironment and, more significantly, demonstrating their potential therapeutic effect in ophthalmic disease.

High-Indexed Intermetallic Pt3Sn Nanozymes with High Activity and Specificity for Sensitive Immunoassay

Great efforts have been made to expand the application fields of nanozymes, which puts forward requirements for nanozymes with both superior catalytic activity and specificity. Herein, we reported the high-indexed intermetallic Pt₃Sn (H-Pt₃Sn) with high peroxidase-like activity and specificity. The resultant H-Pt₃Sn exhibits a specific activity of 345.3 U/mg, which is 1.82 times higher than Pt. Moreover, H-Pt₃Sn possesses negligible oxidase-like and catalase-like activities, achieving superior catalytic specificity toward H₂O₂ activation. Experimental and theoretical calculations reveal both the splitting energy for adsorbed H₂O₂ and the energy barrier for the rate-determining step of H-Pt₃Sn are significantly decreased compared with Pt₃Sn and Pt. Finally, a nanozyme-linked immunosorbent assay is successfully developed, achieving the sensitive and accurate colorimetric detection for carcinoembryonic antigen with a low detection limit of 0.49 pg/mL and showing practical feasibility in serum sample detection.

Neighboring Carboxylic Acid Boosts Peroxidase-Like Property of Metal-Phenolic Nano-Networks in Eradicating Streptococcus mutans Biofilms

Developing nature-inspired nanomaterials with enzymatic activity is essential in combating bacterial biofilms. Here, it is reported that incorporating the carboxylic acid in phenolic/Fe nano-networks can efficiently manipulate their peroxidase-like activity via the acidic microenvironment and neighboring effect of the carboxyl group. The optimal gallic acid/Fe (GA/Fe) nano-networks demonstrate highly enzymatic activity in catalyzing H₂ O₂ into oxidative radicals, damaging the cell membrane and extracellular DNA in Streptococcus mutans biofilms. Theoretical calculation suggests that the neighboring carboxyl group can aid the H₂ O₂ adsorption, free radical generation, and catalyst reactivation, resulting in superb catalytic efficiency. Further all-atom simulation suggests the peroxidation of lipids can increase the cell membrane fluidity and permeability. Also, GA/Fe nano-networks show great potential in inhibiting tooth decay and treating other biofilm-associated diseases without affecting the commensal oral flora. This strategy provides a facile and scale-up way to prepare the enzyme-like materials and manipulate their enzymatic activity for biomedical applications.

Single-Atomic Iron Doped Carbon Dots with Both Photoluminescence and Oxidase-Like Activity

Multifunctional nanozymes can benefit biochemical analysis via expanding sensing modes and enhancing analytical performance, but designing multifunctional nanozymes to realize the desired sensing of targets is challenging. In this work, single-atomic iron doped carbon dots (SA Fe-CDs) are designed and synthesized via a facile in situ pyrolysis process. The small-sized CDs not only maintain their tunable fluorescence, but also serve as a support for loading dispersed active sites. Monoatomic Fe offers SA Fe-CDs exceptional oxidase-mimetic activity to catalyze 3,3',5,5'-tetramethylbenzidine (TMB) oxidation with fast response (V_max  = 10.4 nM s^-1 ) and strong affinity (K_m  = 168 µM). Meanwhile, their photoluminescence is quenched by the oxidation product of TMB due to inner filter effect. Phosphate ions (Pi) can suppress the oxidase-mimicking activity and restore the photoluminescence of SA Fe-CDs by interacting with Fe active sites. Based on this principle, a dual-mode colorimetric and fluorescence assay of Pi with high sensitivity, selectivity, and rapid response is established. This work paves a path to develop multifunctional enzyme-like catalysts, and offers a simple but efficient dual-mode method for phosphate monitoring, which will inspire the exploration of multi-mode sensing strategies based on nanozyme catalysis.

316 stainless steel wire mesh for visual detection of H2O2, glutathione and glucose based on the peroxidase-like activity

Stainless steel is a frequently used and cost-effective material. In this study, we discovered for the first time that fresh 316ss possessed an intrinsic peroxidase (POD) catalytic activity, which can catalyze the substrate of POD-like reaction 3,3',5,5'-tetramethylbenzidine (TMB) changing to a blue-colored product, oxidation of TMB, in the presence of hydrogen peroxide (H₂O₂). Subsequently, a rapid method was conducted to enable the active composites of the 316ss with reused POD activity for 25 circles at least. Based on this finding, the method exhibits a highly sensitive and selective application for H₂O₂, glutathione (GSH), and Glucose determination. The linear range of glucose detection was 5-100 μM and the detection limit was 3 μM. Finally, this method was further used for detection of glucose in human serum. This work finds a new function of 316ss and develops its novel application, which promotes the potential application of nanozyme in nanoscience and nanotechnology. Schematic representation of the enzyme mimic activities of 316ss wire mesh for the colorimetric detection of hydrogen peroxide H₂O₂ and GSH with a superior reusability for more than 25 cycles. Based on this, the colorimetric detection of glucose can be constructed combined with GOx.

Fe-N-C single-atom nanozymes based sensor array for dual signal selective determination of antioxidants

Machine learning algorithms as a powerful tool can efficiently utilize and process large quantities of data generated by high-throughput experiments in various fields. In this work, we used a general ionic salt-assisted synthesis method to prepare oxidase-like Fe-N-C SANs. The possible reason for the excellent enzyme-mimicking activity and affinity of Fe-N-C SANs was further verified by density functional theory calculations. Due to the remarkable oxidase-mimicking activity, the prepared Fe-N-C SANs were used to detect ascorbic acid (AA) with a detection limit of 0.5 μM. Based on the machine learning algorithms, we successfully distinguished six antioxidants (ascorbic acid, glutathione, L-cysteine, dithiothreitol, uric acid, and dopamine) with the same concentration by either one kind of Fe-N-C SANs or three kinds of different Fe-N-C SANs. The usefulness of the Fe-N-C SANs sensor arrays was further validated by the hierarchal cluster analysis, where they also can be correctly identified. More importantly, a SANs-based digital-image colorimetric sensor array has also been successfully constructed and thereby achieved visual and informative colorimetric analysis for practical samples out of the lab. This work not only provides a design synthesis method to prepare SANs but also combines machine learning algorithms with SANs sensors to identify analytes with similar properties, which can further expand to the detection of proteins and cells related to diseases in the future.

Hexavalent Chromium as a Smart Switch for Peroxidase-like Activity Regulation via the Surface Electronic Redistribution of Silver Nanoparticles Anchored on Carbon Spheres

Although some ions, due to their unique chemical properties, can regulate the enzyme-like activity of nanomaterials, it is still a huge challenge to explore the mechanism of regulation. Herein, we found that Cr⁶⁺ (CrO₄^2-) as a smart switch can significantly increase the peroxidase-like (POD-like) activity of silver nanoparticles (Ag NPs), which were anchored efficiently on carbon spheres (Cal-CS/PEG/Ag) using amino-modified poly(ethylene glycol) (PEG) as a bridge. Density functional theory (DFT) calculations demonstrated that the addition of Cr⁶⁺ can not only adjust the surface electronic redistribution of Ag atoms but also improve the geometric structure of the adsorbed intermediate, which resulted in the optimization of free energy and change of bond lengths in the catalytic reaction process, increasing the POD-like activity of Cal-CS/PEG/Ag. Based on the Cr⁶⁺-increased POD-like activity of Cal-CS/PEG/Ag, we successfully constructed a visual sensor of Cr⁶⁺ along with quantitative analysis by the UV spectrum. The sensor has good selectivity for other 29 interfering ions and molecules with a detection limit of 79 nM. In this work, the detailed mechanism of the Cr⁶⁺-increased POD-like activity of Ag NPs was studied and a new possibility for the rational design of ion visual sensors using nanomaterials was proposed.

Ultrathin Ruthenium Nanosheets with Crystallinity-Modulated Peroxidase-like Activity for Protein Discrimination

Noble-metal-based nanozymes have attracted great interest as enzyme mimics because of their unique properties. To modulate the performance and meet the requirements of practical biosensing applications, phase engineering is promising for the design of novel noble-metal-based nanomaterials. Herein, a simple salt-assist strategy was employed for the synthesis of Ru nanosheets (NSs) with the controlled crystalline degree. The crystalline degree plays a significant role in tuning peroxidase-like activity by optimizing the affinity toward the catalytic substrate. Furthermore, the inhibition effect of mercapto molecules on the peroxidase-like activity of Ru NSs was investigated. As a proof-of-concept, the Ru NSs-based colorimetric sensing arrays were developed to distinguish mercapto molecules, and five model molecules were well classified according to the different inhibition effects. Given the complexity of practical conditions, the sensing array was further applied to discriminate proteins possessing rich mercapto groups. This work not only provides an effective strategy for the design of highly active nanozymes but also achieves promising sensing arrays for practical needs.

Manganese-doped iron coordination polymer nanoparticles with enhanced peroxidase-like activity for colorimetric detection of antioxidants

A convenient and sensitive antioxidant assay with high performance is essential for assessing food quality and monitoring the oxidative stress level of biological matrices. Although coordination polymer nanoparticles (CPNs)-based nanozymes have emerged as candidates in the analytical field, strategies to improve the catalytic activity of CPNs have been scarcely revealed and studied. Herein, we demonstrate a manganese (Mn) doping strategy to enhance the peroxidase-mimetic activity of Fe-based CPNs. By tuning the Mn doping amounts and selecting 2,5-dihydroxyterephthalic acid (H₄DHTP) as ligands, the produced nanozymes in amorphous state followed the catalytic activity order of Fe₅Mn-DHTP > Fe₈Mn-DHTP > Fe₂Mn-DHTP > Fe-DHTP > Mn-DHTP. Ulteriorly, benefitting from the best catalytic performance and definite catalytic mechanism of Fe₅Mn-DHTP, versatile colorimetric assays for ultrasensitive detection of one exogenous antioxidant (ascorbic acid, AA) and two endogenous antioxidants (glutathione, GSH; cysteine, Cys) have been deftly devised based on the inhibition of the 3,3',5,5'-tetramethylbenzidine chromogenic reaction in presence of H₂O₂. It was found that mercaptan (GSH and Cys) and AA exhibited different inhibition mechanisms. Practically, such a colorimetric assay was viable to determine the total antioxidant capacity of drugs and foods with desirable results. This work proposes a feasible strategy for embellishing CPN nanozymes used for designing sensitive and convenient assays for various antioxidants based on an explicit detection mechanism.

AgCu@CuO aerogels with peroxidase-like activities and photoelectric responses for sensitive biosensing

Photoelectrochemical (PEC) enzymatic biosensors integrate the excellent selectivity of enzymes and high sensitivity of PEC bioanalysis, but the drawbacks such as high cost, poor stability, and tedious immobilization of natural enzymes on photoelectrodes severely suppress their applications. AgCu@CuO aerogel-based photoelectrode materials with both remarkable enzyme-like activities and outstanding photoelectric properties were innovatively designed and synthesized to evaluate the activity of xanthine oxidase with a wide linear detection range and a low limit of detection.

Lycium Barbarum Polysaccharide-Iron (III) Chelate as Peroxidase Mimics for Total Antioxidant Capacity Assay of Fruit and Vegetable Food

Quantitative evaluation of the antioxidant capacity of foods is of great significance for estimating food’s nutritional value and preventing oxidative changes in food. Herein, we demonstrated an easy and selective colorimetric method for the total antioxidant capacity (TAC) assay based on 3,3’,5,5’-tetramethyl-benzidine (TMB), hydrogen peroxide (H₂O₂) and synthetic Lycium barbarum polysaccharide-iron (III) chelate (LBPIC) with high peroxidase (POD)-like activity. The results of steady-state kinetics study showed that the K_m values of LBPIC toward H₂O₂ and TMB were 5.54 mM and 0.16 mM, respectively. The detection parameters were optimized, and the linear interval and limit of detection (LOD) were determined to be 2–100 μM and 1.51 μM, respectively. Additionally, a subsequent study of the determination of TAC in six commercial fruit and vegetable beverages using the established method was successfully carried out. The results implied an expanded application of polysaccharide-iron (III) chelates with enzymatic activity in food antioxidant analysis and other biosensing fields.

Structure Defect Tuning of Metal-Organic Frameworks as a Nanozyme Regulatory Strategy for Selective Online Electrochemical Analysis of Uric Acid

Nanozymes have been designed to address the limitations of high cost and poor stability involving natural enzymes in analytical applications. However, the catalytic efficiency of the nanozyme still needs to be improved so that it can meet the selectivity and stability requirements of accurate biomolecule analysis. Here, we presented structure defects of metal-organic frameworks (MOFs) as a tuning strategy to regulate the catalytic efficiency of artificial nanozymes and investigated the roles of defects on the catalytic activity of oxidase-like MOFs. Structural defects were introduced into a novel Co-containing zeolitic imidazolate framework with gradually loosened morphology (ZIF-L-Co) by doping cysteine (Cys). It was found that with the increase in defect degree, the properties of materials such as ascorbate oxidase-like, glutathione oxidase-like, and laccase-like were obviously enhanced by over 5, 2, and 3 times, respectively. In-depth structural investigations indicate that the doping of sulfur inducing structural defects which may destroy the equilibrium state between cobalt and nitrogen in 2-methylimidazole and distort the crystal lattice, thereby enhancing the adsorption of oxygen and thus promoting the oxidase-like activity. The ZIF-L-Co-10 mg with enhanced ascorbate oxidase- and laccase-like activity was loaded into a microreactor and integrated into an online electrochemical system (OECS) in the upstream of the detector. This nanozyme-based microreactor can completely remove ascorbic acid, dopamine, and 3,4-dihydroxyphenylacetic acid which are the main interference toward uric acid (UA) electrochemical measurement, and the ZIF-L-Co-10 mg Cys-based OECS system is capable of continuously capturing UA change in rat brain following ischemia-reperfusion injury. Structure defect tuning of ZIF-L-Co not only provides a new regulatory strategy for artificial nanozyme activity but also provides a critical chemical platform for the investigation of UA-related brain function and brain diseases.

Bimetallic molecularly imprinted nanozyme: Dual-mode detection platform

Molecularly imprinted polymer nanozyme (MIL-101(Co,Fe)@MIP) with bimetallic active sites and high-efficiency peroxidase-like (POD-like) activity were synthesized for the ratiometric fluorescence and colorimetric dual-mode detection of vanillin with high selectivity and sensitivity. Compared with the monometallic nanozyme, the POD-like activity of bimetallic nanozyme was greatly enhanced by changing the electronic structure and surface structure. Ratiometric fluorescence and colorimetric dual-mode detection of vanillin in aqueous solution was realized by vanillin entering specific imprinted cavities and blocking the molecular channels on the surface of MIL-101(Co,Fe)@MIP and the dual-mode visual detection was also realized. The limits of detection were as low as 104 nM and 198 nM, respectively. The method proposed in this paper was applied to the real samples of ice cream and candy. And the recoveries were between 93.3% and 105.5%, which also reached a satisfactory degree. The further detection of dexamethasone and prednisone, two drugs belonging to glucocorticoid, proved that the nanozyme analysis method based on MIL-101(Co,Fe)@MIP could be developed into a sensing platform.

Nanozyme-Participated Biosensing of Pesticides and Cholinesterases: A Critical Review

To improve the output and quality of agricultural products, pesticides are globally utilized as an efficient tool to protect crops from insects. However, given that most pesticides used are difficult to decompose, they inevitably remain in agricultural products and are further enriched into food chains and ecosystems, posing great threats to human health and the environment. Thus, developing efficient methods and tools to monitor pesticide residues and related biomarkers (acetylcholinesterase and butylcholinesterase) became quite significant. With the advantages of excellent stability, tailorable catalytic performance, low cost, and easy mass production, nanomaterials with enzyme-like properties (nanozymes) are extensively utilized in fields ranging from biomedicine to environmental remediation. Especially, with the catalytic nature to offer amplified signals for highly sensitive detection, nanozymes were finding potential applications in the sensing of various analytes, including pesticides and their biomarkers. To highlight the progress in this field, here the sensing principles of pesticides and cholinesterases based on nanozyme catalysis are definitively summarized, and emerging detection methods and technologies with the participation of nanozymes are critically discussed. Importantly, typical examples are introduced to reveal the promising use of nanozymes. Also, some challenges in the field and future trends are proposed, with the hope of inspiring more efforts to advance nanozyme-involved sensors for pesticides and cholinesterases.

Axial Ligand-Engineered Single-Atom Catalysts with Boosted Enzyme-Like Activity for Sensitive Immunoassay

Inspired by the key role of the coordination environment in the catalytic activity of enzymes, a rational design of the coordination structure of active sites at the atom scale is expected to develop high-performance enzyme-like catalysts. Here, we design a simple model system involving pentacoordinated and tetracoordinated Fe-N-C single-atom catalysts (named NG-Heme and G-Heme, respectively) to investigate structure-activity relationships. NG-Heme with axial ligand-engineered Fe sites exhibits superior enzyme-like activity to G-Heme, achieving the goal of vivid mimicking of the active sites of peroxidase. Experiments and theoretical studies reveal that the enhanced intrinsic catalytic activity originates from the "push effect" of the additional axial ligand, which can strengthen the interaction between the active site and the intermediate. Based on the outstanding catalytic activity, an NG-Heme-linked immunosorbent assay was constructed for colorimetric detection of carcinoembryonic antigen, exhibiting satisfactory sensitivity and feasibility in the analysis of clinical samples.

One-pot facile synthesis of enzyme-encapsulated Zn/Co-infinite coordination polymer nanospheres as a biocatalytic cascade platform for colorimetric monitoring of bacteria viability

A rapid method for colorimetric monitoring of bacterial viability is described. The colorimetric method was carried out based on glucose oxidase-encapsulated Zn/Co-infinite coordination polymer (Zn/Co-ICP@GOx), which was prepared in aqueous solution free of toxic organic solvents at room temperature. The Zn/Co-ICP@GOx was confirmed to be a robust sphere structure with an average diameter of 147.53 ± 20.40 nm. It integrated the catalytic activity of natural enzyme (GOx) and mimetic peroxidase (Co (П)) all in one, efficiently acting as a biocatalytic cascade platform for glucose catalytic reaction. Exhibiting good multi-enzyme catalytic activity, stability, and selectivity, Zn/Co-ICP@GOx can be used for colorimetric glucose detection. The linear range was 0.01-1.0 mmol/L, and the limit of detection (LOD) was 0.005 mmol/L. As the glucose metabolism is a common expression of bacteria, the remaining glucose can indirectly represent the bacterial viability. Hence, a Zn/Co-ICP@GOx-based colorimetric method was developed for monitoring of bacterial viability. The color was intuitively observed with the naked eye, and the bacterial viability was accurately quantified by measurement of the absorbance at 510 nm. The method was applied to determination of bacterial viability in water and milk samples with recoveries of 99.0-103% and RSD of 0.43-7.5%. The method was rapid (less than 40 min) and applicable to different bacterial species irrespective of Gram-positive and Gram-negative bacteria, providing a universal and promising strategy for real-time monitoring of bacterial viability.

Colorimetric detection of chlorpyrifos in peach based on cobalt-graphene nanohybrid with excellent oxidase-like activity and reusability

Cobalt nanocrystal has been widely used as nano-enzyme for sensing and catalysis due to its high stability and low cost, but poor catalytic activity limits its applications in bioanalysis. The study reports one strategy for synthesis of cobalt-graphene nanohybrid. Histidine-functionalized graphene quantum dot (His-GQD) was bound to graphene sheet via π-π stacking and then combined with cobalt ions in the presence of cetyltrimethylammonium chloride to form stable complex and finally reduced under nitrogen to obtain Co-His-GQD-G. The as-synthesized nanohybrid offers well-defined three-dimensional structure and quasi-superparamagnetism. The cobalt nanoparticles were well dispersed on graphene sheets. The unique structure improves oxidase-like activity of Co-His-GQD-G. Further, Co-His-GQD-G was used as the nanozyme for colorimetric detection of chlorpyrifos. Co-His-GQD-G catalyzes oxidization of 3,3',5,5'-tetramethylbenzidine into blue product. Thiocholine produced by hydrolysis of acetylthiocholine under catalysis of acetylcholinesterase inhibits catalytic activity of Co-His-GQD-G and leads to a reduced oxidization rate. Chlorpyrifos inhibits activity of acetylcholinesterase and brings an enhanced absorbance of blue product. The absorbance at 652 nm linearly increases with increasing chlorpyrifos concentration in the range of 2-20 ng mL^-1 with detection limit of 0.57 ng mL^-1 (S/N = 3). The method was successfully applied in determination of chlorpyrifos in peach by preparing Co-His-GQD-G magnetic gel sheet.

Defect-Engineered Nanozyme-Linked Receptors

Though nanozymes are successfully applied in various areas, the increasing demands facilitate the exploitation of nanozymes possessing higher activity and more functions. Natural enzyme-linked receptors (ELRs) are critical components for signal transductions in vivo by expressing activity variations after binding with ligands. Inspired by this, the defect-engineered carbon nitrides (DCN) are reported to serve as nanozyme-linked receptors (NLRs). For one thing, cyano defects increase the enzyme-like activity by a factor of 109.5. For another, DCN-based NLRs are constructed by employing cyano groups as receptors, and variable outputs are ensued upon the addition of ion ligands. Significantly, both the cascade effect and electronic effect are demonstrated to contribute to this phenomenon. Finally, NLRs are used for pattern recognition of metal ions, indicating the signal transduction ability of NLRs as well. This work not only provides great promise of defect engineering in nanozymes, but also contributes to the design of artificial ELRs.

Nanozymes-Hitting the Biosensing "Target"

Nanozymes are a class of artificial enzymes that have dimensions in the nanometer range and can be composed of simple metal and metal oxide nanoparticles, metal nanoclusters, dots (both quantum and carbon), nanotubes, nanowires, or multiple metal-organic frameworks (MOFs). They exhibit excellent catalytic activities with low cost, high operational robustness, and a stable shelf-life. More importantly, they are amenable to modifications that can change their surface structures and increase the range of their applications. There are three main classes of nanozymes including the peroxidase-like, the oxidase-like, and the antioxidant nanozymes. Each of these classes catalyzes a specific group of reactions. With the development of nanoscience and nanotechnology, the variety of applications for nanozymes in diverse fields has expanded dramatically, with the most popular applications in biosensing. Nanozyme-based novel biosensors have been designed to detect ions, small molecules, nucleic acids, proteins, and cancer cells. The current review focuses on the catalytic mechanism of nanozymes, their application in biosensing, and the identification of future directions for the field.

Metal-Organic Frameworks Enhance Biomimetic Cascade Catalysis for Biosensing

Multiple enzymes-induced biological cascade catalysis guides efficient and selective substrate transformations in vivo. The biomimetic cascade systems, as ingenious strategies for signal transduction and amplification, have a wide range of applications in biosensing. However, the fragile nature of enzymes greatly limits their wide applications. In this regard, metal-organic frameworks (MOFs) with porous structures, unique nano/microenvironments, and good biocompatibility have been skillfully used as carriers to immobilize enzymes for shielding them against hash surroundings and improving the catalytic efficiency. For another, nanomaterials with enzyme-like properties and brilliant stabilities (nanozymes), have been widely applied to ameliorate the low stability of the enzymes. Inheriting the abovementioned merits of MOFs, the performances of MOFs-immboilized nanozymes could be significantly enhanced. Furthermore, in addition to carriers, some MOFs can also serve as nanozymes, expanding their applications in cascade systems. Herein, recent advances in the fabrication of efficient MOFs-involving enzymes/nanozymes cascade systems and biosensing applications are highlighted. Integrating diversified signal output modes, including colorimetry, electrochemistry, fluorescence, chemiluminescence, and surface-enhanced Raman scattering, sensitive detection of various targets (including biological molecules, environmental pollutants, enzyme activities, and so on) are realized. Finally, challenges and opportunities about further constructions and applications of MOFs-involving cascade reaction systems are briefly put forward.

Emerging materials for the electrochemical detection of COVID-19

The SARS-CoV-2 virus is still causing a dramatic loss of human lives worldwide, constituting an unprecedented challenge for the society, public health and economy, to overcome. The up-to-date diagnostic tests, PCR, antibody ELISA and Rapid Antigen, require special equipment, hours of analysis and special staff. For this reason, many research groups have focused recently on the design and development of electrochemical biosensors for the SARS-CoV-2 detection, indicating that they can play a significant role in controlling COVID disease. In this review we thoroughly discuss the transducer electrode nanomaterials investigated in order to improve the sensitivity, specificity and response time of the as-developed SARS-CoV-2 electrochemical biosensors. Particularly, we mainly focus on the results appeard on Au-based and carbon or graphene-based electrodes, which are the main material groups recently investigated worldwidely. Additionally, the adopted electrochemical detection techniques are also discussed, highlighting their pros and cos. The nanomaterial-based electrochemical biosensors could enable a fast, accurate and without special cost, virus detection. However, further research is required in terms of new nanomaterials and synthesis strategies in order the SARS-CoV-2 electrochemical biosensors to be commercialized.

Colorimetric detection of acetylcholinesterase and its inhibitor based on thiol-regulated oxidase-like activity of 2D palladium square nanoplates on reduced graphene oxide

A convenient and sensitive colorimetric assay for acetylcholinesterase (AChE) and its inhibitor has been designed based on the oxidase-like activity of {100}-faceted Pd square nanoplates which are grown in situ on reduced graphene oxide (PdSP@rGO). PdSP@rGO can effectively catalyze the oxidation of colorless 3,3',5,5'-tetramethylbenzidine (TMB) without the assistance of H₂O₂ to generate blue oxidized TMB (oxTMB) with a characteristic absorption peak at 652 nm. In the presence of AChE, acetylthiocholine (ATCh), a typical AChE substrate, is hydrolyzed to thiocholine (TCh). The generated TCh can effectively inhibit the PdSP@rGO-triggered chromogenic reaction of TMB via cheating with Pd, resulting in color fading and decrease in absorbance. Thus, a sensitive probe for AChE activity is constructed with a working range of 0.25-5 mU mL^-1 and  a limit of detection (LOD) of 0.0625 mU mL^-1. Furthermore, because of the inhibition effect of tacrine on AChE, tacrine is also detected through the colorimetric AChE assay system within the concentrations range 0.025-0.4 μM with a LOD of 0.00229 μM. Hence, a rapid and facile colorimetric procedure to sensitively detect AChE and its inhibitor can be anticipated through modulating the oxidase-like activity of PdSP@rGO. Colorimetric method for detection of AChE and its inhibitor is established by modulating the oxidase mimetic activity of {100}-faceted Pd square nanoplates on reduced graphene oxide (PdSP@rGO).

Perspectives for Single-Atom Nanozymes: Advanced Synthesis, Functional Mechanisms, and Biomedical Applications

Single-atom nanozymes (SANs) are one of the newest generations of nanozymes, which have been greatly developed in the past few years and exploited widely for many applications, such as biosensing, disease diagnosis and therapy, bioimaging, and so on. SANs, possessing dispersed single-atom structures and a well-defined coordination environment, exhibit remarkable catalytic performance with both high activity and stability. In this paper, the most recent progress in SANs is reviewed in terms of their advanced synthesis, characterization, functional mechanisms, performance validation/optimization, and biomedical applications. Several technical challenges hindering practical applications of SANs are analyzed, and possible research directions are also proposed for overcoming the challenges.

Single-atom catalysts boost signal amplification for biosensing

Development of highly sensitive biosensors has received ever-increasing attention over the years. Due to the unique physicochemical properties, the functional nanomaterial-enabled signal amplification strategy has made some great breakthroughs in biosensing. However, the sensitivity and selectivity still need further improvement. Single-atom catalysts (SACs) containing atomically dispersed metal active sites demonstrate distinctive advantages in catalytic activity and selectivity for various catalytic reactions. As a consequence, the SAC-enabled signal amplification strategy holds great promise in biosensors, demonstrating satisfactory sensitivity and selectivity with the assistance of tunable metal-support interactions, coordination environments and geometric/electronic structures of active sites. In this tutorial review, we briefly discuss the structural advantages of SACs. Then, the catalytic mechanism at the atomic scale and signal amplification effects of SACs in the colorimetric, electrochemical, chemiluminescence, electrochemiluminescence, and photoelectrochemical biosensing applications are highlighted in detail. Finally, opportunities and challenges to be faced in the future development of the SAC-enabled signal amplification strategy for biosensing are discussed and outlooked.

Functionalization of MOF-5 with mono-substituents: effects on drug delivery behavior

Metal organic frameworks (MOFs) are widely used in drug carrier research due to their tunability. The properties of MOFs can be adjusted through incorporation of mono-substituents to obtain pharmaceutical carriers with excellent properties. In this study, different functional groups of –NH₂, –CH₃, –Br, –OH and –CH₂ Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> CH are connected to MOF-5 to analyse the effect of mono-substituent incorporation on drug delivery properties. The resulting MOFs have similar structures, except for Br–MOF. The pore size of this series of MOFs ranges from 1.04 nm to 1.10 nm. Using oridonin (ORI) as a model drug, introduction of the functional groups appears to have a significant effect on the drug delivery performance of the MOFs. The IRMOFs can be ranked according to drug-loading capacity: MOF-5 > HO–MOF-5 > H₃C–MOF-5 = Br–MOF-5 > H₂N–MOF-5 > CH₂CH–MOF-5. The ORI release from ORI @IRMOFs is explored at two different pH values: 7.4 and 5.5, and the ORI@IRMOFs are ranked according to the cumulative release percentage of ORI: ORI@MOF-5 > ORI@Br–MOF-5 > ORI@H₃C–MOF-5 > ORI@H₂N–MOF-5 > CH₂CH–MOF-5 > ORI@ HO–MOF-5. In particular, the release behaviour of ORI@MOFs is described through a new model. The different drug delivery performance of MOFs may be due to the complex interactions between MOFs and ORI. In addition, the introduction of single substituents does not change the biocompatibility of MOFs. MTT in vitro experiments prove that this series of MOFs has low cytotoxicity. This study shows that the incorporation of single substituents can effectively adjust the drug delivery behaviour of MOFs, which is conducive to realization of personalized drug delivery modes. The introduction of active groups can also facilitate post-synthesis modification to achieve coupling of targeting groups. MOFs incorporated with single substituents perform favorably in terms of use as biomedical drug delivery alternative carriers in effective drug payload and flexible drug release.

Metal organic frameworks (MOFs) are widely used in drug carrier research due to their tunability.