A periodic distribution of the chain length of amylopectin as revealed by high-performance anion-exchange chromatography

Green fabrication of hierarchical pore starch with controllable pore size and shape based on different amylose-amylopectin ratios

Porous starch (PS) was widely prepared for its large effective surface area, pore volume, and superior hydrophilic property, but its application is limited by enzyme and chemical use. In this study, a novel method to prepare PS with controllable hierarchical pores through ultrasound-ethanol precipitation and different amylose-amylopectin ratios is proposed. As shown in porous morphology and parameters, there were macropores, mesopores and micropores in the formed PS. Moreover, we found that the content of amylose (AM) was negatively related with the total pore volume and pore diameter in PS. The different surface tensions created through ethanol evaporation and water migration during oven drying are the main mechanisms of forming pores with controllable sizes. Based on the molecular information and the long-/short-range orders reflected by crystalline pattern, lamellas, and single-/double-helices, we conclude that AM is easier to form V-type inclusion complexes with ethanol. More single helix of V-amylose was transformed from B-type polymorph after ethanol exchange, which had significantly broadened dLozentz in PS. The TG spectra proved that the novel PS has the stable thermodynamic property. Overall, the finding of an objective regular between AM and pore sizes of PS in this study may support the other work related to PS.

New insights into how freeze-drying and cryo-milling affects the fine structure and digestibility of gelatinized starch

Freeze-drying (FD) and cryo-milling (CM) are common methods for preparing powder gelatinized starch samples. This study investigates the structural characterization of raw/gelatinized maize starches and digestibility after FD/CM processes to elucidate their effect on starch digestibility determination. Results showed that FD slightly increased digestibility, while higher initial glucose content in CM samples, especially for gelatinized samples. Only FD retained the granular morphology and relative crystallinity (RC), while gelatinized-FD decreased RC by 75%. CM decreased RC by 12%, while gelatinized-CM decreased it by 97%. Combined with short-range and chain structural results, FD tended to disrupt internal connected chains through volume stress, while CM cleaved glycosidic bonds in external chain. Stretched chains in gelatinized starch promoted the breakage of chains during shearing and their efficient binding with digestive enzymes. These findings would provide a basis for pre-treatment of powder samples and processes of starch- rich foods.

Starch chain-length distributions affect the processing and digestion characteristics of proso millet starch

Starch chain-length distributions play a key role in regulating the processing and digestion characteristics of proso millet starch. Waxy proso millet starch has higher endothermic enthalpy (13.06-16.73 J/g) owing to its higher relative crystallinity (27.83%-32.04%), while nonwaxy proso millet starch has lower peak viscosity (1.0630-1.1930 Pa∙s) and stronger viscoelasticity owing to its higher amylose content (21.72%-24.34%). Non-waxy proso millet starch exhibited two different digestion phases and its resistant starch content (18.37%-20.80%) was higher than waxy proso millet starch. Correlation analysis showed proso millet starch with longer amylopectin B1 chains and more amylopectin B2 chains exhibited excellent thermal ability and retrograde resistance, whereas proso millet starch with shorter and more amylose medium/long-chains not only reduced the digestion rate and increased the resistant starch content but also exhibited stronger viscoelasticity and excellent retrogradation properties. These results could provide more insights into efficient utilization of proso millet starch.

Analysis of differences in physicochemical properties of different sorghum varieties and their influence on the selection of raw materials for winemaking

Sorghum is one of the oldest crops in the world, an important grain crop in northern China, and a major raw material in the liquor-brewing industry. The physicochemical properties, cooking characteristics, and starch quality of sorghum seeds considerably affect the liquor-brewing process.To select suitable sorghums for liquor brewing and to determine the cooking characteristics and starch physicochemical properties of different sorghum varieties, 30 types of sorghum were used in this study, and their compositions were compared; six types of sorghum were further studied for their cooking quality and starch physicochemical and pasting characteristics. Gas chromatography time of flight mass spectrometry was used to analyse the cooking aroma of sorghum seeds. Additionally, scanning electron microscopy, a rapid visco analyser, and a differential calorimetric scanner were used to analyse the microstructure of sorghum starch, starch pasting characteristics, and thermodynamic properties, respectively. The results revealed that the water absorption and saccharification forces of glutinous sorghum were higher than those of japonica sorghum and that the aroma substances were significantly different. Glutinous sorghum starch had high crystallinity, freeze-thaw stability, and enthalpy, thus indicating its structural stability. This study provides a theoretical basis for the selection of wine raw materials in the future.

Retrogradation inhibition and intragranular distribution in cooked rice by addition of α-glucosidase (AG) and branching enzyme (BE)

The effect of inhibiting retrogradation and changes in chain length distribution by AG and BE, which are texture-modifying enzymes, has been clarified. To ascertain in which part of the rice grain retrogradation occurs and which enzymes is most effective, the degree of retrogradation in each part of the rice grain was measured from the surface to the core of the same rice grain using a synchrotron radiation X-ray beam with a beam size of 100 μm. Retrogradation was effectively suppressed at all measurement sites by enzyme addition, although the effect of enzymes was greater at the surface. Rice grain sections were stained with iodine and eosin. A starch layer that does not easily form a complex with iodine was observed inside the protein layer at the surface of cooked rice. A starch layer with a long molecular chain that forms complexes with iodine was observed inside the rice grain.

Hypoglycemic effect of orally administered resistant dextrins prepared with different acids on type 2 diabetes mice induced by high-fat diet and streptozotocin

A comparative study was performed to investigate the physicochemical properties and protective effects of hydrochloric acid-resistant dextrin (H-RD), citric acid-resistant dextrin (C-RD) and tartaric acid-resistant dextrin (T-RD) on the metabolic disorders and intestinal microbiota for type 2 diabetes mellitus (T2DM) mice. T-RD had the minimum molecular weight, with the highest short chain (DP 6-12) proportion and resistant starch content. After 4-week intervention with the three resistant dextrins, the body weight and fasting blood glucose of T2DM mice were improved significantly, accompanied by the reduction of serum indexes (TG, TC, LDL-C, ALT, AST, CRE, BUN, FINS, and GSP), but the serum HDL-C and liver glycogen levels increased. Among the three RDs intervention groups, T-RD showed the most significant improvement, followed by C-RD and finally H-RD. The 16 s rDNA results indicated that oral administration of resistant dextrins favored the proliferation of specific gut microbiota, including Faecalibaculum, Parabacteroides and Dubosiella, and reduced the ratio of Firmicutes/Bacteroidota, which is beneficial for reducing insulin resistance. Herein, the findings supported that the resistant dextrins exhibited a remission effect on T2DM, providing a basis for the development of functional food adjuvants for T2DM treatment.

Structure and physicochemical properties of starches from six accessions of the genus Pueraria in China

Kudzu (Pueraria lobata) root contains abundant starch, but the physicochemical properties of kudzu starch are not well understood. In this study, we compared the compositions and physicochemical properties of starches isolated from six Pueraria accessions in China. Caige starch exhibited the highest purity (96.99 %) and amylose content (24.76 %), while Yege starch contained higher levels of puerarin (493.37 μg/g) and daidzein (38.68 μg/g). All kudzu starches were rich in resistant starch, with RS2 content ranging from 38.61 % to 46.22 % and RS3 content from 3.59 % to 6.04 %. The granules of kudzu starches varied in morphology, with Yege starch featuring larger polygonal granules. The kudzu starches presented either A-type or A-type-like C-type diffraction patterns. Caige starch had a higher IR2 value (1.28), higher gelatinization temperatures, wider temperature ranges, and greater enthalpy changes. Yege (JX) starch exhibited the highest peak viscosity but the lowest setback viscosity and pasting temperature. Fenge starch showed the highest final viscosity, with Fenge (ZJ) starch demonstrating the highest crystallinity (25.7 %) and IR1 value (0.80). These results indicated that kudzu starches derived from various Pueraria species possess unique structural and physicochemical properties, which provide significant potential for applications in food and other industrial fields.

Perspectives on Starch Structure, Function, and Synthesis in Relation to the Backbone Model of Amylopectin

Understanding functionality of polysaccharides such as starch requires molecular representations that account for their functional characteristics, such as those related to gelatinization, gelation, and crystallization. Starch macromolecules are inherently very complex, and precise structures can only be deduced from large data sets to generate relational models. For amylopectin, the major, well-organized, branched part of starch, two main molecular representations describe its structure: the classical cluster model and the more recent backbone model. Continuously emerging data call for inspection of these models, necessary revisions, and adoption of the preferred representation. The accumulated molecular and functional data support the backbone model and it well accommodates our present knowledge related to the biosynthesis of starch. This Perspective focuses on our current knowledge of starch structure and functionality directly in relation to the backbone model of amylopectin.

Structure and digestibility changes of Indica and japonica waxy rice starch during in vitro pre-digestion

The digestion of starch have been of great interest, yet little is known about the structure changes and structure-digestibility relationships of waxy rice starch during digestion. In this study, waxy rice starch from Indica and Japonica cultivars were in vitro pre-digested for different times, and the changes in their structure and properties were investigated, including granule morphology, chain length distribution, short-range ordered structure, crystallinity, thermal properties, and digestibility. Pre-digested Indica and Japonica waxy rice starch had the characteristics of porous starch, showing similar surface erosion and pores. With the prolongation of pre-digestion time, the amylose content decreased by 0.74 %-2.69 %, the proportion of amylopectin short A chain (DP6-12) and B1 chain (DP13-24) decreased, and the proportion of long B2 (DP25-36) and B3 chain (DP ≥ 37) increased, especially in pre-digested Indica waxy rice starch. The short- and long-range ordered structure of pre-digested starch increased, manifested by an increase in the absorbance ratio at 1047/1022 cm-1, a decrease at 1022/995 cm-1, and an increase in relative crystallinity, leading to higher gelatinization temperature and enthalpy. Pre-digested waxy rice starch had a reduced rapidly digestible starch of 18.27 %-33.93 % and an increased resistant starch of 29.51 %-41.32 %, which will be applied in functional starch and healthy starchy foods.

Effect of twin-screw extrusion pretreatment on starch structure, rheological properties and 3D printing accuracy of whole potato flour and its application in dysphagia diets

Twin-screw extrusion pretreatment has great potential for the development of three-dimensional (3D) printed food as dysphagia diets. This study aimed to investigate the effect of twin-screw extrusion pretreatment on starch structure, rheological properties and 3D printing accuracy of whole potato flour and its application in dysphagia diets. The results indicated that twin-screw extrusion pretreatment was found to change chain length distributions, short-range ordered structure and relative crystallinity of whole potato flour (WPF), thereby improving its 3D printing performance. With the increasing proportion of long linear chains (DP > 12), the intensity of hydrogen bonds, linear viscoelastic region, storage modulus (G'), loss modulus (G″), viscosity and n of whole potato flour paste were increased, enhancing high printing accuracy and shape retention of 3D printed samples with a denser microstructure and smaller pore diameter distribution. The whole potato flour paste extruded with a peristaltic pump speed at 5.25 mL/min (WPF-4) displayed the highest printing accuracy with excellent rheological properties, good water distribution state and dense network structure, which classified as class 5 level dysphagia diets. This research provides an effective guidance for the modification of whole potato flour using twin-screw extrusion pretreatment as 3D printed food inks for dysphagia patients.

High-Resistant Starch Based on Amylopectin Cluster via Extrusion: From the Perspective of Chain-Length Distribution and Structural Formation

Resistant starch (RS) has the advantage of reshaping gut microbiota for human metabolism and health, like glycemic control, weight loss, etc. Among them, RS3 prepared from pure starch is green and safe, but it is hard to achieve structural control. Here, we regulate the crystal structure of starch with different chain-length distributions (CLDs) via extrusion at low/high shearing levels. The change in CLDs in extruded starch was obtained, and their effects on the fine structure (Dm, dBragg, dLorentz, degree of order and double helix, degree of crystal) of RS and its physicochemical properties were investigated by SAXS, FTIR, XRD and 13C NMR analyses. The results showed that the RS content under a 250 r/min extrusion condition was the highest at 61.52%. Furthermore, the crystalline system induced by high amylopectin (amylose ≤ 4.78%) and a small amount of amylose (amylose ≥ 27.97%) was favorable for obtaining a high content of RS3-modified products under the extruding environment. The control of the moderate proportion of the A chains (DP 6-12) in the starch matrix was beneficial to the formation of RS.

Effects of nitrogen fertilizer application on the physicochemical properties of foxtail millet (Setaria italica L.) starch

The use of nitrogen fertilizer is a crucial agronomic practice to increase crop output and quality. This study investigated the impact of five nitrogen application levels (0, 60, 135, 210, and 285 kg N/hm2) on the physicochemical properties of foxtail millet (FM) starch. Optimal nitrogen application (210 kg N/hm2) significantly increased L*, a*, and b* values, water and oil absorption capacity, water solubility, and swelling power of starch. The number of small starch granules increased as the nitrogen application rate increased, but the granule morphology and typical A-type pattern did not change among the treatments. Nitrogen application increased the relative crystallinity and ordered structure, resulting in a higher gelatinization enthalpy. Compared to the control group (7.02 J/g), the enthalpy increased by 21.94 %, 66.38 %, 73.50 %, and 103.28 % under the nitrogen application rates, respectively. Moreover, nitrogen application greatly increased the percentage of A and B3 chains while it lowered the apparent amylose content, peak viscosity, and final viscosity. The effects of 210 and 285 kg N/hm2 treatments on the water solubility and swelling power, water and oil absorption, and light transmission of starch were greater compared to the 60 and 135 kg N/hm2 treatments. These results indicate that nitrogen fertilization significantly affects the physicochemical properties of FM starch.

Impact of sugar and sugar alcohol on the pasting and retrogradation properties of starch with distinct molecular structures

The molecular structures of starch and sugar/sugar alcohol are recognized as critical determinants of starch pasting and retrogradation properties. However, their combined effects on these properties remain elusive. This study for the first time examined the pasting and retrogradation properties of nine starches with diverse molecular structures, both with and without the addition of glucose, sucrose, isomaltose, isomalt, and sorbitol. The presence of sugar/sugar alcohol significantly enhanced starch pasting viscosity. In particular, the variations of the peak viscosity of wheat starch were more pronounced than other starches, possibly due to its distinct molecular structures. The changes in melting temperatures and enthalpy of retrograded starches were complex, varying depending on the type of starch and sugar/sugar alcohol used. For example, the melting peak temperature ranged from 56.45 °C (TS) to 61.9 °C (WMS), and the melting enthalpy ranged from 0.16 J/g (TS) to 5.6 J/g (PES). The micromorphology of retrograded starch revealed agglomeration and needle-like structures, instead of a network structure, after the addition of glucose and sorbitol, respectively. Correlations between starch molecular structure and pasting properties remained largely unchanged, while the relationship between starch molecular structure and retrogradation properties exhibited notable variations after the addition of sugars or sugar alcohols. These findings help a better understanding of the effects of starch molecular structure and the presence of sugar/sugar alcohol on starch pasting and retrogradation properties.

Starch Characteristics and Amylopectin Unit and Internal Chain Profiles of Indonesian Rice (Oryza sativa)

Indonesia is arguably a major player in worldwide rice production. Though white rice is the most predominantly cultivated, red, brown, and red rice are also very common. These types of rice are known to have different cooking properties that may be related to differences in their starch properties. Investigating the starch properties, especially the fine structure of their amylopectin, can help understand these differences. This study aims to investigate the starch characteristics of some Indonesian rice varieties by evaluating the starch granule morphology and size, molecular characteristics, amylopectin unit and internal chain profiles, and thermal properties. Starches were extracted from white rice (long grain (IR-64) and short grain (IR-42)), brown rice, red rice, and black rice cultivated in Java Island, Indonesia. IR-42 had the highest amylose content of 39.34% whilst the black rice had the least of 1.73%. The enthalpy of gelatinization and onset temperature of the gelatinization of starch granules were between 3.2 and 16.2 J/g and 60.1 to 73.8 °C, respectively. There were significant differences between the relative molar amounts of the internal chains of the samples. The two white rice and black rice had a significantly higher amount of A-chains, but a lower amount of B-chains and fingerprint B-chains (Bfp) than the brown and red rice. The average chain length (CL), short chain length (SCL), and external chain length (ECL) were significantly longer for the red rice and the black rice in comparison to both the white rice amylopectins. The long chain length (LCL) and internal chain length (ICL) of the sample amylopectins were similar. Rice starches were significantly different in the internal structure but not as much in their amylopectin unit chain profile. These results suggest the differences in their amylopectin clusters and building blocks.

Investigation of the role of sodium chloride on wheat starch multi-structure, physicochemical and digestibility properties during X-ray irradiation

In this paper, different NaCl content was added to wheat starch and then subjected to X-ray irradiation to investigate the effect of salt on starch modification by irradiation. The results showed that the degradation of wheat starch intensified with the increase in irradiation dose. When irradiated at the same dose, wheat starch with sodium chloride produced shorter chains, lower molecular weight and amylose content, and higher crystallinity, solubility, and resistant starch than wheat starch without sodium chloride. The energy generated by X-rays dissociating sodium chloride caused damage to the glycoside bonds of the starch molecule. With a further increase in the mass fraction of NaCl, the hydrogen bonds of the starch molecules were broken, and the double helix structure was depolymerized, which exacerbated the extent of irradiation-modified wheat starch. At the same time, starch molecules will be rearranged to form a more stable structure.

Changes of crystalline structure and physicochemical properties of Pueraria lobata var. thomsonii starch under water deficit

Crystal type is an important physicochemical property of starch. However, it is currently unclear whether changes in crystal type affect other properties of starch. This study discovered that water deficit resulted in an increase in small starch granules and transparency in Pueraria lobata var. thomsonii, while causing a decrease in amylose content and swelling power. Additionally, the crystal type of P. Thomsonii starch changed from CB-type to CA-type under water deficit, without significantly altering the short-range ordered structure and chain length distribution of starch. This transformation in crystal type led to peak splitting in the DSC heat flow curve of starch, alterations in gelatinization behavior, and an increase in resistant starch content. These changes in crystalline structure and physicochemical properties of starch granules are considered as adaptive strategies employed by P. Thomsonii to cope with water deficit.

Insight to starch retrogradation through fine structure models: A review

The retrogradation of starch is crucial for the texture and nutritional value of starchy foods products. There is mounting evidence highlighting the significant impact of starch's fine structures on starch retrogradation. Because of the complexity of starch fine structure, it is a formidable challenge to study the structure-property relationship of starch retrogradation. Several models have been proposed over the years to facilitate understanding of starch structure. In this review, from the perspective of starch models, the intricate structure-property relationship is sorted into the correlation between different types of structural parameters and starch retrogradation performance. Amylopectin B chains with DP 24-36 and DP ≥36 exhibit a higher tendency to form ordered crystalline structures, which promotes starch retrogradation. The chains with DP 6-12 mainly inhibit starch retrogradation. Based on the building block backbone model, a longer inter-block chain length (IB-CL) enhances the realignment and reordering of starch. The mathematical parameterization model reveals a positive correlation between amylopectin medium chains, amylose short chains, and amylose long chains with starch retrogradation. The review is structured according to starch models; this contributes to a clear and comprehensive elucidation of the structure-property relationship, thereby providing valuable references for the selection and utilization of starch.

Absolute Quantitative Lipidomics Reveals Different Granule-Associated Surface Lipid Roles in the Digestibility and Pasting of Waxy, Normal, and High-Amylose Rice Starches

Granule-associated surface lipids (GASLs) and internal lipids showed different lipid-amylose relationships, contents, and distributions, suggesting their differing biological origins and functions, among waxy, normal, and high-amylose rice starch. The GASL content mainly depended on the pore size, while internal lipids regulated starch biosynthesis, as indicated by correlations of internal lipids with the chain length distribution of amylopectin and amylose content. Of the 1346 lipids detected, 628, 562, and 408 differentially expressed lipids were observed between normal-waxy, high-amylose-waxy, and normal-high-amylose starch, respectively. After the removal of GASLs, the higher lysophospholipid content induced greater decreases in the peak and breakdown viscosity and swelling power, while the highest digestibility increase was found with the highest triacylglycerol content. Thus, different GASL compositions led to different digestibility, swelling, and pasting outcomes. This study sheds new light on the mechanism of the role of GASLs in the structure and properties of starch, as well as in potential modifications and amyloplast membrane development.

Molecular Basis of the Granular Characteristics of Small-Granule Starch: A Comparative Study

Small-granule starches (SGSs) have technological advantages over starches of conventional sizes for many applications. The study compared the granular characteristics of three SGSs (from amaranth, quinoa, and taro) with those of maize and potato starches and revealed their molecular basis. The results indicated that the supramolecular architecture of starch granules was not necessarily correlated with granule size. Acid hydrolysis of amaranth and quinoa starches was fast due to not only their small granule sizes but also the defects in the supramolecular structure, to which short external and internal chain lengths of amaranth and quinoa amylopectins contributed. By comparison, the granular architecture of taro starch granules was more stable partly due to the longer external chain length of taro amylopectin. Comparison of the molecular composition of branched subunits (released by using α-amylase of Bacillus amyloliquefaciens) in amylopectins and that in lintnerized starches suggested a significant heterogeneous degradation of amaranth and quinoa starches at supramolecular levels.

Effects of Lactobacillus plantarum fermentation on the structure, physicochemical properties, and digestibility of foxtail millet starches

This study investigated the effects of Lactobacillus plantarum fermentation on the structural, physicochemical, and digestive properties of foxtail millet starches. The fermented starch granules formed a structure with honeycomb-like dents, uneven pores, and reduced particle size. As the fermentation time extended, the amylose content of waxy (0.88 %) and non-waxy (33.71 %) foxtail millet starches decreased to the minimum value at 24 h (0.59 % and 29.19 %, respectively), and then increased to 0.85 % and 31.87 % at 72 h, respectively. Both native and fermented foxtail millet starches exhibited an A-type crystal structure. Compared with native samples, the fermented samples performed enhanced proportion of short-branched chain, crystallinity, and short-range ordered degree. After fermentation for 24 h, the solubility, adsorption capacity, and pasting viscosity of foxtail millet starches improved, whereas the swelling power, pasting temperature, breakdown, setback, and degree of retrogradation reduced. Additionally, fermentation increased the transition temperatures, enthalpy, and digestibility. Overall, Lactobacillus plantarum fermentation is considered a competent choice to regulate the characteristics of foxtail millet starch.

Effect of starch degradation induced by extruded pregelatinization treatment on the quality of gluten-free brown rice bread

There is considerable interest in preparing high-quality gluten-free bread. The effect of the molecular structure of extruded pregelatinization starch on the dough's rheological properties and the brown rice bread's quality was investigated. Extruded rice starch (ERS) was prepared with various added moisture contents of 20 % (ERS20), 30 % (ERS30), and 40 % (ERS40), respectively. ERS had smaller molecular weight and more short branched chains as the moisture content decreased. The dough elasticity and deformation resistance were improved with the ERS supplementation and in the order of ERS40 > ERS30 > ERS20 at the same level. Fortification with ERS improved the gluten-free brown rice bread quality. Compared to the control group, breadcrumbs supplemented with ERS20 at the 10 % level showed an increase in cell density from 17.87 cm-2 to 28.32 cm-2, a decrease in mean cell size from 1.22 mm2 to 0.81 mm2, and no significant change in cell area fraction. In addition, the specific volume increased from 1.50 cm3/g to 2.04 cm3/g, the hardness decreased from 14.34 N to 6.28 N, and the springiness increased from 0.56 to 0.74. The addition of extruded pregelatinization starches with smaller molecular weights and higher proportions of short chains is promising for preparing high-quality gluten-free bread.

Insights into multiscale structure and digestive characteristic of starch from two cultivars of chestnut during kernel development

Multiscale structure and digestive characteristic of starch during kernel development of Castanea henryi ('Jinzhui' (YS) and 'Baiyan No.1' (WS)) were investigated in this study. Structural analysis revealed that the surface of starch granules became smooth, the amylopectin content decreased (from 71.32 % to 70.47 %, from 71.44 % to 68.37 %, respectively), the chain length distribution of amylopectin reduced (the proportion of B1 chain decreased from 52.35 % to 50.60 %, from 52.22 % to 50.59 %, respectively) while the amorphous and semi-crystalline lamellae of starch increased during development, which was consistent with the decreasing relative crystallinity (from 28.79 % to 24.11 %, from 29.57 % to 23.66 %, respectively) and short-range ordering degree. The degradation of ordered structure further resulted in the increase of digestibility, especially in the late developmental stage, supported by a significant decrease of resistant starch content (from 70.21 % to 61.70 % and from 73.58 % to 58.86 %, respectively). Transcriptome analysis and RT-qPCR were performed to explore the possible molecular mechanisms affecting starch structure. The high expression of several key genes including AGPase, GBSS, SBE, SSS, ISA and PUL in late development stage might be the reason of structural changes during development. The results provided valuable information for starch accumulation during kernel development of Castanea henryi.

Two-step modification of pullulanase and transglucosidase: A novel way to improve the gel strength and reduce the digestibility of rice starch

The multiscale structure, gel strength and digestibility of rice starch modified by the two-step modification of pullulanase (PUL) pretreatment and transglucosidase (TG) treatment for 6, 12, 18 and 24 h were investigated. The debranching hydrolysis of PUL produced some linear chains, which rearranged to form stable crystalline structures, reducing the digestible starch content, but weakening the gel strength. TG treatment connected some short chains to longer linear chains via α-1,6-glycosidic bonds, generating the structures of linear chain with fewer branches. The short branches promoted the interaction between starch molecules to form a more compact three-dimensional gel network structure, showing higher hardness and springiness. Moreover, these chains could form more stable crystals, reducing the digestible starch content, and the increase of branching degree inhibited digestive enzyme hydrolysis, reducing the digestion rate. The multiscale structure of starch tended to stabilize after TG treatment for 18 h, which could form a gel with stronger strength and lower digestibility than native starch gel. Therefore, the two-step modification of PUL and TG was an effective way to change the structure of rice starch to improve the gel strength and reduce the digestibility.

Fine molecular structure and digestibility changes of potato starch irradiated with electron beam and X-ray

The change of digestibility of starch irradiated with different types from the perspective of fine structure is not well understood. In this work, the change of internal structure, molecular weight and chain-length distribution, helical structure, lamellar structure, fractal structure and digestibility of native and treated potato starch with electron beam and X-ray was analyzed. Two irradiations caused the destruction of internal structure, the disappearance of growth rings and increase of pores. Irradiation degraded starch to produce short chains and to decrease molecular weight. Irradiation increased double helical content and the thickness and peak area of lamellar structure, resulting in the reorganization of amylopectin and increase of structure order degree. The protected glycosidic linkages increased starch resistance to hydrolase attack, thereby enhancing the anti-digestibility of irradiated starch. Pearson correlation matrix also verified the above-mentioned results. Moreover, X-ray more increased the anti-digestibility of starch by enhancing ability to change fine structure.

GBSS mutations in an SBE mutated background restore the potato starch granule morphology and produce ordered granules despite differences to native molecular structure

Potato starch with mutations in starch branching enzyme genes (SBEI, SBEII) and granule-bound starch synthase gene (GBSS) was characterized for molecular and thermal properties. Mutations in GBSS were here stacked to a previously developed SBEI and SBEII mutation line. Additionally, mutations in the GBSS gene alone were induced in the wild-type variety for comparison. The parental line with mutations in the SBE genes showed a ∼ 40 % increase in amylose content compared with the wild-type. Mutations in GBSS-SBEI-SBEII produced non-waxy, low-amylose lines compared with the wild-type. An exception was a line with one remaining GBSS wild-type allele, which displayed ∼80 % higher amylose content than wild-type. Stacked mutations in GBSS in the SBEI-SBEII parental line caused alterations in amylopectin chain length distribution and building block size categories of whole starch. Correlations between size categories of building blocks and unit chains of amylopectin were observed. Starch in GBSS-SBEI-SBEII mutational lines had elevated peak temperature of gelatinization, which was positively correlated with large building blocks.

Amylopectin chain length distributions and amylose content are determinants of viscoelasticity and digestibility differences in mung bean starch and proso millet starch

This study aimed to reveal the underlying mechanisms of the differences in viscoelasticity and digestibility between mung bean starch (MBS) and proso millet starch (PMS) from the viewpoint of starch fine molecular structure. The contents of amylopectin B2 chains (14.94-15.09 %), amylopectin B3 chains (14.48-15.07 %) and amylose long chains (183.55-198.84) in MBS were significantly higher than PMS (10.45-10.76 %, 12.48-14.07 % and 70.59-88.03, respectively). MBS with higher amylose content (AC, 28.45-31.80 %) not only exhibited a lower weight-average molar mass (91,750.65-128,120.44 kDa) and R1047/1022 (1.1520-1.1904), but also was significantly lower than PMS in relative crystallinity (15.22-23.18 %, p < 0.05). MBS displayed a higher storage modulus (G') and loss modulus (G'') than PMS. Although only MBS-1 showed two distinct and discontinuous phases, MBS exhibited a higher resistant starch (RS) content than PMS (31.63-39.23 %), with MBS-3 having the highest RS content (56.15 %). Correlation analysis suggested that the amylopectin chain length distributions and AC played an important role in affecting the crystal structure, viscoelastic properties and in vitro starch digestibility of MBS and PMS. These results will provide a theoretical and scientific basis for the development of starch science and industrial production of low glycemic index starchy food.

Enhancing the anti-thixotropic properties of waxy maize starch modified by different α-amylases and its underlying molecular mechanism

The large thixotropy of the starch-thickened foods is often unfavorable in many applications. This study examined the contribution of the proportion of amylopectin chain length to time-dependence of starch gels. The α-amylase (AM) from Bacillus stearothermophilus and maltogenic α-amylase (MA) from Bacillus subtilis were used to trim amylopectin in different reaction patterns. HPLC, HPAEC and IBC data suggested AM attacked B-chains (DP 12-36), causing an increment in number of the chains with DP 6-12, whereas MA primarily trimmed the short B-chains (DP 12-18) and partial A-chains (DP 9-12) to generate short chains with DP 6-9. Interestingly, the recovery of AM-gels was faster than MA-gels at the same degree of hydrolysis when subjected to shear according to the linear correlation analysis. When releasing the same mass of sugar, shortening of the long internal chains played an important role in reducing time dependence of starch gel rather than the external side chains. Possible models were proposed to illustrate the differences in the mechanism of rapid-recovery caused by different side-chain distributions. The outcome provided a new perspective to regulate the thixotropy behavior of starch through enzyme strategies in the granular state.

Physicochemical properties and in vitro digestibility of ginseng starches under citric acid-autoclaving treatment

In this study, the effects of citric acid-autoclaving (CA-A) treatment on physicochemical and digestive properties of the native ginseng starches were investigated. The results showed that ginseng starch exhibited a B-type crystal structure with a low onset pasting temperature of 44.23 ± 0.80 °C, but high peak viscosity and setback viscosity of 5897.34 ± 53.72 cP and 692.00 ± 32.36 cP, respectively. The granular morphology, crystal and short-range ordered structure of ginseng starches were destroyed after CA-A treatment. The more short-chain starches were produced, resulting in the ginseng starches solubility increased. In addition, autoclaving, citric acid (CA) and CA-A treatment promoted polymerization and recrystallization of starch molecules, increased the proportion of amylopectin B1, and B3 chains, and improved molecular weight and resistant starch (RS) content of ginseng starches. The most significant multi-scale structural change was induced by CA-A treatment, which reduced the relative crystallinity of ginseng starch from 28.26 ± 0.24 % to 2.75 ± 0.08 %, and increased the content of RS to 54.30 ± 0.14 %. These findings provided a better understanding of the structure and properties of Chinese ginseng starches and offered new ideas for the deep processing of ginseng foods.

Subtle structural variations of resistant starch from whole cooked rice significantly impact metabolic outputs of gut microbiota

While cooked rice is widely consumed as a whole food, the specific characteristics and impact of its resistant starch (RS) on gut microbiota are largely unexplored. In this study, three rice varieties with distinct starch molecular structures were used to prepare RS from cooked rice. All three types of RS had a crystalline structure characterized as B + V type, with the V type being the predominant crystalline polymorph. Distinct differences in chain-length distributions were observed among different RSs, with rapidly fermentable starch fractions comprising short amylopectin and long amylose chains, while the degrees of polymerization (DPs) ∼ 10, 37, 65, and 105 fractions comprised the slowly fermentable starch. Jasmine rice RS showed the highest proportion of this slowly fermentable starch fraction, which appeared to be specifically utilized by Megasphaera_elsdenii_DSM_20460 OTU198. The fermentation of Jasmine RS resulted in the highest production of butyrate after 24 h, which was positively correlated with the relative abundance of Megasphaera_elsdenii_DSM_20460 OTU198. These findings collectively indicate that RS in cooked rice with a higher V type crystallinity and DPs ∼ 10, 37, 65, and 105 fractions promote butyrate production and stimulate the growth of butyrate-producing bacteria in the human gut, thereby conferring beneficial effects on gut health.

Effect of different screw speeds on the structure and properties of starch straws

To illustrate the action mechanism of screw speed on the performance of starch-based straws during the extrusion process, starch-based straws at different screw speeds were prepared using a twin-screw extruder and the structures and characteristics were compared. The results indicated that as screw speeds improved from 3 Hz to 13 Hz, the A chain of amylopectin increased from 25.47 % to 28.87 %, and the B3 chain decreased from 6.34 % to 3.47 %. The absorption peak of hydroxyl group shifted from 3296 cm-1 to 3280 cm-1. The relative crystallinity reduced from 13.49 % to 9.89 % and the gelatinization enthalpy decreased from 3.5 J/g to 0.2 J/g. The performance of starch straws did not increase linearly with increasing screw speeds. The starch straw produced at screw speed of 7 Hz had the largest amylose content, the highest gelatinization temperature, the minimum bending strength, and the lowest water absorption rate in hot water (80 °C). Screw speed had a remarkable impact on the mechanical strength, toughness and hydrophobicity of starch-based straws. This study revealed the mechanism of screw speed on the mechanical strength and water resistance of starch straws in the thermoplastic extrusion process and created the theoretical basis for the industrial production of starch-based straws.

Impact of Corn Starch Molecular Structures on Texture, Water Dynamics, Microstructure, and Protein Structure in Silver Carp (Hypophthalmichthys molitrix) Surimi Gel

This study systematically investigates the impact of corn starch molecular structures on the quality attributes of surimi gel products. Employing molecular analyses to characterize corn starch, three amylopectin fractions (A, B1, and B2), categorized by the degree of polymerization ranges (6 < X ≤ 12, 12 < X ≤ 24, and 24 < X ≤ 36, respectively) were specifically focused on. The surimi gel quality was comprehensively assessed through texture profile analysis, nuclear magnetic resonance, scanning electron microscopy, stained section analysis, and Fourier transform infrared spectroscopy. Results indicated the substantial volume expansion of corn amylopectin upon water absorption, effectively occupying the surimi gel matrix and fostering the development of a more densely packed protein network. Starch gels with higher proportions of A, B1, and B2 exhibited improved hardness, chewiness, and bound water content in the resultant surimi gels. The weight-average molecular weight and peak molecular weight of corn starch showed a strong positive correlation with surimi gel hardness and chewiness. Notably, the secondary structure of proteins within the surimi gel was found to be independent of corn starch's molecular structure. This study provides valuable insights for optimizing formulations in surimi gel products, emphasizing the significance of elevated A, B1, and B2 content in corn starch as an optimal choice for crafting dense, chewy, water-retaining surimi gels.

Synergistic effect of enzymatic pre-treatment and amylose-lipid complex construction on the physicochemical properties of maize starch

In this study, the effects of maltogenic amylase (MAA) pre-treatment and starch-fatty acid complex construction on the physicochemical properties of maize starch (MAS) were investigated. The average chain length of MAA-modified MAS was found to decrease from 18.15 to 14.92. Moreover, MAA pre-treatment of starch induced the formation of a V-type complex. This behaviour was demonstrated by the higher diffraction intensity, enzymatic resistance and short-range ordering of the samples pre-treated with MAA compared with unmodified samples. X-ray diffraction and rheological analysis revealed that the re-crystallisation peak intensities and storage modulus of MAA-MAS-lauric acid (LA)/stearic acid (SA) complexes were lower than those of MAA-starches, MAS-LA/SA complexes and control. The rate of starch re-crystallisation was effectively decreased by the combination of MAA pre-treatment and V-type complex construction. The anti-retrogradation (long-term) characteristics of the tested samples were in the following order: MAA-MAS-LA/SA complexes > MAA-starches > MAS-LA/SA complexes > control.

Mechanistic insights into the enhanced texture of potato noodles by incorporation of small granule starches

Potato noodles are a popular food due to their unique texture and taste, but native potato starch often fails to meet consumer demands for precise textural outcomes. The effect of blending small granule (waxy amaranth, non-waxy oat and quinoa) starch with potato starch on the properties of noodles was investigated to enhance quality of noodles. Morphological results demonstrated that small granule starch filled gaps between potato starch granules, some of which gelatinized incompletely. Meanwhile, XRD and FTIR analysis indicated that more ordered structures and hydrogen bonding among starch granules increased with addition of small granule starch. The addition of oat or quinoa starch increased gel elasticity, decreased viscosity of the pastes, and increased the tensile strength of noodles, while addition of 30 % and 45 % waxy amaranth starch did not increase G' value of gel or tensile strength of noodles. These results indicated that amylose molecules played an important role during retrogradation, and may intertwine and interact with each other to enhance the network structure of starch gel in potato starch blended with oat or quinoa starch. This study provides a natural way to modify potato starch for desirable textural properties of noodle product.

Importance of both leached and residual starch molecular structures in determining cooked rice texture at different rice-to-water cooking ratios

Although texture of cooked rice has been investigated with regard to its relation to starch structure, it remains unclear how starch molecular structure and water content together affect its texture. Thus, the texture, and starch molecular structure of 10 rice varieties and their leachates during cooking were studied with a range of rice-to-water ratios. Although hardness of cooked rice decreased, no trend for the alteration of stickiness observed over the increase of water content. Generally, more amylopectin with DP 12-36 and amylose with DP 5000-20,000 in leachate, less starch molecules with DP > 36 in residual materials resulted in a higher stickiness of cooked rice, which is rationalized by their slower retrogradation tendency and higher amount of non-reducing ends available for binding to textural probe. Rice-to-water ratio was another crucial factor in determining relations between starch structures and cooked rice texture. For example, more leached amylopectin with DP 12-100 resulted in a higher stickiness of cooked rice, while this was not the case for rice cooked at rice-to-water ratios of 1: 1.2 and 1: 1.4. These results give new insights on the effects of starch molecular structure and water content on the cooked rice texture.

Molecular rotor as an in-situ fluorescent probe for the degree of polymerization of α-D-1,4-glucans

Various starch synthesis and tailoring processes involve prevailing adjustments in the degree of polymerization (DP) of linear α-D-1,4-glucan chains (LGCs) for the improved functional performances. Previous studies indicated that LGCs might hinder the twisted relaxation of 9-(2-carboxy-2-cyanovinyl)-julolidine (CCVJ, a hydrophilic molecular rotor), highlighting CCVJ as a potential in-situ structural probe for LGC. In this study, glucose and its α-D-1,4 oligomers and polymers with molecular weights ranging from 0.18 kDa to 70.00 kDa were prepared as the model molecules (MM). The fluorescent emission behavior of CCVJ in various concentrations (1-5 g/L) of MM solutions or dispersions were analyzed. Results showed that for the low-DP MMs (≤ 3.98 kDa) with good aqueous stability, CCVJ emission increased by about 20 times with the DP of MMs. In contrast, CCVJ generally emitted weak DP-relevant but glucan content-dependent fluorescence in response to the interaction with high-DP MMs (> 3.98 kDa). Furthermore, a double-logarithmic linear relationship was found between the emission intensity of CCVJ and the molar-based molecular weight of glucan. The result combined with the molecular dynamic simulation suggested that CCVJ underwent surface-to-surface interaction with MMs. This study may contribute to the real-time analysis of the DP of α-D-1,4 oligoglucosides in maltodextrin and starch syrup.

The RING-Type Domain-Containing Protein GNL44 Is Essential for Grain Size and Quality in Rice (Oryza sativa L.)

Grain size in rice (Oryza sativa L.) shapes yield and quality, but the underlying molecular mechanism is not fully understood. We functionally characterized GRAIN NUMBER AND LARGE GRAIN SIZE 44 (GNL44), encoding a RING-type protein that localizes to the cytoplasm. The gnl44 mutant has fewer but enlarged grains compared to the wild type. GNL44 is mainly expressed in panicles and developing grains. Grain chalkiness was higher in the gnl44 mutant than in the wild type, short-chain amylopectin content was lower, middle-chain amylopectin content was higher, and appearance quality was worse. The amylose content and gel consistency of gnl44 were lower, and protein content was higher compared to the wild type. Rapid Visco Analyzer results showed that the texture of cooked gnl44 rice changed, and that the taste value of gnl44 was lower, making the eating and cooking quality of gnl44 worse than that of the wild type. We used gnl44, qgl3, and gs3 monogenic and two-gene near-isogenic lines to study the effects of different combinations of genes affecting grain size on rice quality-related traits. Our results revealed additive effects for these three genes on grain quality. These findings enrich the genetic resources available for rice breeders.

Effect of structural characteristics of resistant starch prepared by various methods on microbial community and fermentative products

Resistant starch (RS) has been extensively studied because of its beneficial effects on gut microbiota. In this study, four RSs obtained through various preparation processes were utilized for in vitro fermentation, and their structural characteristics before and after fermentation were determined using chromatography, Fourier infrared spectroscopy, and scanning electron microscopy (SEM). It was observed that these RSs can be classified into two categories based on their fermentation and structural features. The autoclaving RS (ARS) and extruding RS (ERS) were classified as Class I Microbiome Community (MC-I), characterized by a higher proportion of butyrate and its producers, including unclassified_g_Megasphaera and Megasphaera elsdenii. While microwaving RS (MRS) and ultrasound RS (URS) belonged to Class II Microbiome Community (MC-II), marked by a higher proportion of acetate and its producer, Bifidobacterium pseudocatenulatum DSM 20438. MC-I had a lower molecular weight, shorter chain length, more chains with degree of polymerization (DP) 36-100, and a more ordered structure than MC-II. Furthermore, SEM observations revealed distinct degradation patterns between MC-I and MC-II, which may be attributed to their surface structural characteristics. These findings imply that the preparation methods employed for RS can determine its multilevel structural characteristics, and consequently influence its physiological properties.

Starch molecular structures in relation to properties of ratoon rice produced by different ratooning practices

The development of forage-grain ratoon rice (RR) pattern could ensure food security and promote silage production. Herein three indica rice varieties were used to investigate the influence of different forage clipping stages (heading, milk-ripe, wax-ripe, and full-ripe) on starch molecular structures and RR properties. The apparent amylose contents (AAC) of starches increased, but pasting viscosities, gelatinization temperatures and starch sizes decreased with the postponement of clipping stages due to the retardation of endosperm development. The starches showed A-type crystalline structure with increased in vitro digestibility; however relative crystallinity decreased by 13.45 % to 23.89 %. The short fa (DP 6-12) chains of amylopectin increased while long fb3 (DP ≥ 37) chains decreased (p < 0.05). The proportions of amylose chains with DP 100-2000 increased but those with DP 2000-20,000 decreased. Rice grain strength was positively correlated with fb3 chains while negatively correlated with fa chain. The hardness of cooked RR was positively correlated with AAC while negatively correlated with fb2 (DP 25-36). RR clipping at milk-ripe stage had the highest grain strength and moderate texture properties. The elucidation of structure-property relationships is helpful for RR utilization and development of suitable cultivation conditions for RR production.

A combined recrystallization and acetylation strategy for resistant starch with enhanced thermal stability and excellent short-chain fatty acid production

In this study, resistant starch (RS) with enhanced thermal stability and excellent short-chain fatty acid production was obtained using recrystallization at 50 °C of debranched waxy maize starch followed by an acetylation strategy. RS sample obtained by debranching with a 25% high concentration of native starch combined with recrystallization at 50 °C (25DBS-50 °CP) and acetylated RS (25DBS-50 °CPA) exhibited high relative crystallinity of 69.4% and 64.2%, respectively. And the peak gelatinization temperature values of them reached 116.8 °C and 111.4 °C, and the RS contents of them after cooking for 30 min remained at 35.1% and 40.0%, respectively. The acetic acid yield of 25DBS-50 °CPA was higher than that of the control group. These results indicated that recrystallization at 50 °C combined with acetylation for debranched starch could be used as a new method for regulating the digestibility and fermentation properties while developing food with a low glycemic response and specific nutritional benefits.

Effect of high voltage dielectric barrier discharge (DBD) atmospheric cold plasma treatment on physicochemical and functional properties of taro (Colocasia esculenta) starch

The goal of the proposed study is to investigate the effects of three different power levels (30, 32 and 34 kV) and exposure time (2, 4 and 8 min) of dielectric barrier discharge (DBD) atmospheric cold plasma treatment on the functional and physicochemical characteristics of taro starch. Investigations were done into how different treatments impact the multi-structural, functional and physicochemical attributes of taro starch. The findings showed that cold plasma treatments substantially impacted starch granule shapes (3.60-2.54 μm), such as reduced aggregations and developed fissures on granule surface due to the generation of an etching by plasma species and enhancement in the surface topography and roughness of treated starch as compared with native by SEM and AFM analysis. Besides this, no variations were detected in the functional groups of taro starch using FT-IR analysis after cold plasma treatments. However, the A-type pattern in the XRD did not affect it, while a reduction in relative crystallinity (14.20-11.50 %) was seen as a function of the active plasma species depolymerization. Furthermore, depending on the cold plasma voltage and treatment time, amylose content (20.12-15.98 %), paste clarity (24.48-31.27 %), solubility (0.41-65.53 %), freezing thaw stability (% syneresis) (32.10-42.58 %), color properties (L*, 94.79-97.52), whiteness index (79.37-84.66), molecular weight distribution (Peak 1, 12.79-5.35 × 108 g/mol; Peak 2, 4.20-1.56 × 107 g/mol) and in vitro digestibility (RDS, 64.10-64.08 %) significantly changed. So, based on these excellent properties, this study suggested that cold plasm-treated taro starch can be used in the field of food packaging material, functional food and pharmaceutical products. Therefore, a potential approach for physically altering starch is plasma treatment.

Effects of starch multiscale structure on the physicochemical properties and digestibility of Radix Cynanchi bungei starch

Radix Cynanchi bungei (RCb) contains 40-70 % starch, yet little is known about the structure and properties of RCb starch. In this study, the multiscale structure of two cultivars of RCb starch (YW201501 and BW201001) were characterized, and the effects of starch structure on its physicochemical properties were investigated. The differences in physicochemical properties of RCb starch were influenced by its multiscale structure. The starch granules were round and irregular polygon, with sizes ranging between 2 and 14 μm. YW201501 had a higher amylose (21.81 %) and lipid (0.96 %) content, molecular weight (59.5 × 106 g/mol), and A chain proportion (27.5 %), and a lower average granule size (6.14 μm), amylopectin average chain length (19.7), and B3 chain proportion (10.3 %). Both starches were B-type crystalline, with higher crystallinity (26.3 %) and R1047/1022 (0.74) for YW201501, resulting in large gelatinization enthalpy. In addition, the higher peak viscosity and larger retrogradation degree of YW201501 were correlated to its higher amylose content. In vitro digestibility revealed that the low rapidly digestible starch and high resistant starch of BW201001 were related to the fine structure of starch. YW201501 and BW201001 had a medium glycemic index (62.6-66.0) with potential for processing into healthy starchy foods.

A new sight separation for collecting starch nanocrystals with small size and high crystallinity based on the hydrolysis mechanism

To prevent starch nanocrystals (SNCs) that are generated at an early stage from being hydrolyzed excessively, this study proposed a new separation method, named "neutral dispersion and acidic precipitation." SNCs were prepared from waxy potato starch by sulfuric acid hydrolysis. Based on the results of kinetics and molecular weight, the hydrolysis was divided into three stages, e.g., rapid (initial 1 day), medium (subsequent 1 day) and slow stage (2-5 days). The rapid and medium stages were related to the degradation of amorphous region in starch, and the slow stage mainly referred to SNC release. Therefore, the method was developed to separate SNCs at the slow stage. After centrifugation at 6000 rpm, large particles were removed from the SNC suspension under pH 7. The SNCs with small average size and crystallite size, high relative crystallinity (RC), and high dispersion stability in the supernatant were retained and were then precipitated entirely under pH 5, because pH 5 led to the reduction of dispersion stability of SNCs. Meanwhile, the hydrothermal and dry-thermal stability of separated SNCs were significantly promoted. The separation method has the potential in SNC preparation for increasing the yield and collecting products with small size and high RC.

Physicochemical properties of ultrasound-pretreated pea starch and its inclusion complexes with lauric acid

Ultrasound is a promising green technology for modifying starch. The influence of ultrasound pretreatment (UPT) at diverse temperatures on the morphology and molecular structure of pea starch and its ability to form inclusion complexes with lipids were investigated. After UPT at each temperature, the starch granules retained an unchanged crystalline structure but exhibited notable changes in short-range molecular order and molecular structure. In comparison with the samples treated at 0 and 20 °C, pea starch subjected to UPT at 40 °C had a significantly (P ≤ 0.05) higher complexing index with lauric acid (LA) and the starch-LA inclusion complex exhibited a higher enthalpy change, relative crystallinity, and resistant starch content. These differences were attributed to the higher temperature causing changes in the disruption points of starch chains and an enlargement in the molecular weight of linear chains. These results may promote the utilization of ultrasound for effective starch modification.

Long-term straw return improves cooked indica rice texture by altering starch structural, physicochemical properties in South China

Straw return can improve rice eating quality by modifying starch formation from long-term field trials, whereas the relevant mechanisms are still unknown. A long-term field experiment, including straw removal (CK), straw burning return (SBR), and straw return (SR) was conducted to investigate the starch structure, physicochemical properties, and cooked rice textures of indica early- and late-rice. Compared with CK, SBR and SR enhanced relative crystallinity, amylopectin long chains in both rice seasons, and gelatinization temperatures in late rice. Compared to SBR, SR decreased protein content and amylopectin short chains but increased starch branching degree, breakdown, and stickiness, ultimately contributing to improved starch thermal and pasting properties. Meanwhile, SR decreased hardness, cohesiveness, and chewiness, resulting in cooked texture meliorated, which was mainly attributed to amylopectin chain length and starch granule size. The results suggest that SR increased cooked texture of indica rice by altering starch structural and physicochemical properties.

A comprehensive review on starch: Structure, modification, and applications in slow/controlled-release fertilizers in agriculture

This comprehensive review thoroughly examines starch's structure, modifications, and applications in slow/controlled-release fertilizers (SRFs) for agricultural purposes. The review begins by exploring starch's unique structure and properties, providing insights into its molecular arrangement and physicochemical characteristics. Various methods of modifying starch, including physical, chemical, and enzymatic techniques, are discussed, highlighting their ability to impart desirable properties such as controlled release and improved stability. The review then focuses on the applications of starch in the development of SRFs. It emphasizes the role of starch-based hydrogels as effective nutrient carriers, enabling their sustained release to plants over extended periods. Additionally, incorporating starch-based hydrogel nano-composites are explored, highlighting their potential in optimizing nutrient release profiles and promoting plant growth. Furthermore, the review highlights the benefits of starch-based fertilizers in enhancing plant growth and crop yield while minimizing nutrient losses. It presents case studies and field trials demonstrating starch-based formulations' efficacy in promoting sustainable agricultural practices. Overall, this review consolidates current knowledge on starch, its modifications, and its applications in SRFs, providing valuable insights into the potential of starch-based formulations to improve nutrient management, boost crop productivity, and support sustainable agriculture.

Understanding CaCl2 induces surface gelatinization to promote cold plasma modified maize starch: Structure-effect relations

To investigate the influence of surface gelatinization on cold plasma (CP) modification of starch, this study used CaCl2 to modify maize starch by surface gelatinization, further combined with CP treatment and characterized its multi-scale structure and physicochemical properties. The results revealed that starch surface gelatinization causes roughness and fragmentation on the granule surface, and CP undergoes etching effects. The synergistic modification promotes starch degradation, as evidenced by molecular weight decrease and short-chain ratio increase. Although the growth rings, FT-IR patterns, and crystal types of starch remained unchanged, the synergistic modification induced a reduction in the short-range orderliness and crystallinity of starch, thus causing a decrease in the pasting properties and contributing to its solubility. Notably, the CP treatment improved the RDS and SDS contents of the gelatinized starch due to more active sites on the granule surface after gelatinization, and this finding may provide insight into the deep processing of starch.

Discrepancies in resistant starch and starch physicochemical properties between rice mutants similar in high amylose content

The content of resistant starch (RS) was considered positively correlated with the apparent amylose content (AAC). Here, we analyzed two Indica rice mutants, RS111 and Zhedagaozhi 1B, similar in high AAC and found that their RS content differed remarkably. RS111 had higher RS3 content but lower RS2 content than Zhedagaozhi 1B; correspondingly, cooked RS111 showed slower digestibility. RS111 had smaller irregular and oval starch granules when compared with Zhedagaozhi 1B and the wild type. Zhedagaozhi 1B showed a B-type starch pattern, different from RS111 and the wild type, which showed A-type starch. Meantime, RS111 had more fa and fb1 but less fb3 than Zhedagaozhi 1B. Both mutants showed decreased viscosity and swelling power when compared with the parents. RS111 had the lowest viscosity, and Zhedagaozhi 1B had the smallest swelling power. The different fine structures of amylopectin between RS111 and Zhedagaozhi 1B led to different starch types, gelatinization properties, paste viscosity, and digestibility. In addition to enhancing amylose content, modifications on amylopectin structure showed great potent in breeding rice with different RS2 and RS3 content, which could meet the increasing needs for various rice germplasms.

Effects of elevated nitrogen fertilizer on the multi-level structure and thermal properties of rice starch granules and their relationship with chalkiness traits

BACKGROUND

Chalkiness in rice reduces its market value and affects consumer acceptance. Research on the mechanism of chalkiness formation has focused primarily on the activity of key enzymes of carbon metabolism and starch accumulation. The relationship between the formation of chalkiness induced by N fertilizer and rice starch's multi-level structure and thermal properties still needs to be fully elucidated.

RESULTS

In this study, the rates of chalky grains and degree of chalkiness decreased with the increase in N fertilizer dosage. This was attributed to an increased proportion of short chains, ordered structure carbon chains, small starch granules, and branched starches, and a higher degree of crystallinity and ΔHg in protein, and a decreased proportion of amylose, large starch granules, and weighted average diameter of starch granule surface area and volume. Application of N fertilizer promoted an increased proportion of short-branched chain amylopectin to develop a more ordered carbohydrate structure and crystalline lamella. These effects enhanced the normal development and compactness of starch granules in grains, and improved their arrangement morphology, thereby reducing the chalkiness in rice.

CONCLUSION

These changes in starch multi-level structure and protein improve the physicochemical characteristics of starch and enhance the fullness, crystallinity and compactness of starch granules, while synergistically increasing the regularity and homogeneity of starch granules and thus optimizing the stacking pattern of starch granules, leading to a reduction in rice chalkiness under nitrogen fertilization and thus improving the appearance of rice. © 2023 Society of Chemical Industry.

Loss of ADP-glucose transporter in barley sex1 mutant caused shrunken endosperm but with elevated protein and β-glucan content in whole meal

Grain shape and plumpness affect barley yield. Despite numerous studies on shrunken endosperm mutants in barley, their molecular mechanism and application potential in the food industry are largely unknown. Here, map-based cloning, co-segregation analyses, and allelic variant validation revealed that the loss of HORVU6Hr1G037950 encoding an ADP-glucose transporter caused the shrunken endosperm in sex1. Haplotype analysis suggested that hap4 in the promoter sequence was positively related to the hundred-grain weight showing a breeding potential. A pair of near-isogenic lines targeting HORVU6Hr1G037950 was produced and characterized to investigate molecular mechanisms that SEX1 regulates endosperm development. Results presented that the absence of the SEX1 gene led to the decrease of starch content and A-type granules size, the increase of β-glucan, protein, gelatinization temperature, soluble sugar content, amylopectin A chains, and B1 chains. Enzymatic activity, transcriptome and metabolome analyses revealed the loss of SEX1 results in an impaired ADP-glucose-to-starch conversion process, consequently leading to higher soluble sugar contents and lower starch accumulation, thereby inducing a shrunken-endosperm phenotype in sex1. Taken together, this study provides new insights into barley grain development, and the elevated protein and β-glucan contents of the whole meal in sex1 imply its promising application in the food industry.

Periodic changes in chain lengths distribution parameters of wheat starch during endosperm development

This study analyzed the molecular structure of developing wheat endosperm starch at different stages after anthesis (DAA) using chain length distribution analysis by size exclusion chromatography (SEC) and fluorophore-assisted carbohydrate electrophoresis. Our results revealed periodic changes in the content of both amylose and amylopectin fractions. Specifically, the content of amylose chains with a degree of polymerization (DP) > 100 significantly decreased from 5 to 10 DAA (28% to 21%) and from 15 to 20 DAA (29% to 26%), but increased between 10 and 15 DAA (21% to 29%) and 20 to 25 DAA (30.0% to 33%). Conversely, the content of short amylopectin chains with DP ≤ 32 showed the opposite trend. Interestingly, mRNA expression levels of key starch biosynthesis genes did not exhibit periodic changes. These findings contribute to our understanding of starch biosynthesis and provide important insights for the development of starch-based products.