A mechanism for heterogeneous endothelial responses to flow in vivo and in vitro

Size-Dependent Locomotion Ability of Surface Microrollers on Physiologically Relevant Microtopographical Surfaces

Controlled microrobotic navigation inside the body possesses significant potential for various biomedical engineering applications. Successful application requires considering imaging, control, and biocompatibility. Interaction with biological environments is also a crucial factor in ensuring safe application, but can also pose counterintuitive hydrodynamic barriers, limiting the use of microrobots. Surface rolling microrobots or surface microrollers is a robust microrobotic platform with significant potential for various applications; however, conventional spherical microrollers have limited locomotion ability over biological surfaces due to microtopography effects resulting from cell microtopography in the size range of 2-5 µm. Here, the impact of the microtopography effect on spherical microrollers of different sizes (5, 10, 25, and 50 µm) is investigated using computational fluid dynamics simulations and experiments. Simulations revealed that the microtopography effect becomes insignificant for increasing microroller sizes, such as 50 µm. Moreover, it is demonstrated that 50 µm microrollers exhibited smooth locomotion ability on in vitro cell layers and inside blood vessels of a chicken embryo model. These findings offer rational design principles for surface microrollers for their potential practical biomedical applications.

Iatrogenic air embolism: pathoanatomy, thromboinflammation, endotheliopathy, and therapies

Iatrogenic vascular air embolism is a relatively infrequent event but is associated with significant morbidity and mortality. These emboli can arise in many clinical settings such as neurosurgery, cardiac surgery, and liver transplantation, but more recently, endoscopy, hemodialysis, thoracentesis, tissue biopsy, angiography, and central and peripheral venous access and removal have overtaken surgery and trauma as significant causes of vascular air embolism. The true incidence may be greater since many of these air emboli are asymptomatic and frequently go undiagnosed or unreported. Due to the rarity of vascular air embolism and because of the many manifestations, diagnoses can be difficult and require immediate therapeutic intervention. An iatrogenic air embolism can result in both venous and arterial emboli whose anatomic locations dictate the clinical course. Most clinically significant iatrogenic air emboli are caused by arterial obstruction of small vessels because the pulmonary gas exchange filters the more frequent, smaller volume bubbles that gain access to the venous circulation. However, there is a subset of patients with venous air emboli caused by larger volumes of air who present with more protean manifestations. There have been significant gains in the understanding of the interactions of fluid dynamics, hemostasis, and inflammation caused by air emboli due to in vitro and in vivo studies on flow dynamics of bubbles in small vessels. Intensive research regarding the thromboinflammatory changes at the level of the endothelium has been described recently. The obstruction of vessels by air emboli causes immediate pathoanatomic and immunologic and thromboinflammatory responses at the level of the endothelium. In this review, we describe those immunologic and thromboinflammatory responses at the level of the endothelium as well as evaluate traditional and novel forms of therapy for this rare and often unrecognized clinical condition.

Rolling microswarms along acoustic virtual walls

Rolling is a ubiquitous transport mode utilized by living organisms and engineered systems. However, rolling at the microscale has been constrained by the requirement of a physical boundary to break the spatial homogeneity of surrounding mediums, which limits its prospects for navigation to locations with no boundaries. Here, in the absence of real boundaries, we show that microswarms can execute rolling along virtual walls in liquids, impelled by a combination of magnetic and acoustic fields. A rotational magnetic field causes individual particles to self-assemble and rotate, while the pressure nodes of an acoustic standing wave field serve as virtual walls. The acoustic radiation force pushes the microswarms towards a virtual wall and provides the reaction force needed to break their fore-aft motion symmetry and induce rolling along arbitrary trajectories. The concept of reconfigurable virtual walls overcomes the fundamental limitation of a physical boundary being required for universal rolling movements.

The effect of stiffened diabetic red blood cells on wall shear stress in a reconstructed 3D microaneurysm

Blood flow within the vasculature of the retina has been found to influence the progression of diabetic retinopathy. In this research cell resolved blood flow simulations are used to study the pulsatile flow of whole blood through a segmented retinal microaneurysm. Images were collected using adaptive optics optical coherence tomography of the retina of a patient with diabetic retinopathy, and a sidewall (sacciform) microaneurysm was segmented from the volumetric data. The original microaneurysm neck width was varied to produce two additional aneurysm geometries in order to probe the influence of neck width on the transport of red blood cells and platelets into the aneurysm. Red blood cell membrane stiffness was also increased to resolve the impact of rigid red blood cells, as a result of diabetes, in blood flow. Wall shear stress and wall shear stress gradients were calculated throughout the aneurysm domains, and the quantification of the influence of the red blood cells is presented. Average wall shear stress and wall shear stress gradients increased due to the increase of red blood cell membrane stiffness. Stiffened red blood cells were also found to induce higher local wall shear stress and wall shear stress gradients as they passed through the leading and draining parental vessels. Stiffened red blood cells were found to penetrate the aneurysm sac more than healthy red blood cells, as well as decreasing the margination of platelets to the vessel walls of the parental vessel, which caused a decrease in platelet penetration into the aneurysm sac.

Vascular dysfunction and pathology: focus on mechanical forces

The role of mechanical forces is emerging as a new player in the pathophysiologic programming of the cardiovascular system. The ability of the cells to 'sense' mechanical forces does not relate only to perception of movement or flow, as intended traditionally, but also to the biophysical properties of the extracellular matrix, the geometry of the tissues, and the force distribution inside them. This is also supported by the finding that cells can actively translate mechanical cues into discrete gene expression and epigenetic programming. In the present review, we will contextualize these new concepts in the vascular pathologic programming.

Shape anisotropy-governed locomotion of surface microrollers on vessel-like microtopographies against physiological flows

Surface microrollers are promising microrobotic systems for controlled navigation in the circulatory system thanks to their fast speeds and decreased flow velocities at the vessel walls. While surface propulsion on the vessel walls helps minimize the effect of strong fluidic forces, three-dimensional (3D) surface microtopography, comparable to the size scale of a microrobot, due to cellular morphology and organization emerges as a major challenge. Here, we show that microroller shape anisotropy determines the surface locomotion capability of microrollers on vessel-like 3D surface microtopographies against physiological flow conditions. The isotropic (single, 8.5 µm diameter spherical particle) and anisotropic (doublet, two 4 µm diameter spherical particle chain) magnetic microrollers generated similar translational velocities on flat surfaces, whereas the isotropic microrollers failed to translate on most of the 3D-printed vessel-like microtopographies. The computational fluid dynamics analyses revealed larger flow fields generated around isotropic microrollers causing larger resistive forces near the microtopographies, in comparison to anisotropic microrollers, and impairing their translation. The superior surface-rolling capability of the anisotropic doublet microrollers on microtopographical surfaces against the fluid flow was further validated in a vessel-on-a-chip system mimicking microvasculature. The findings reported here establish the design principles of surface microrollers for robust locomotion on vessel walls against physiological flows.

Reduction in MicroRNA-4488 Expression Induces NFκB Translocation in Venous Endothelial Cells Under Arterial Flow

PURPOSE

Little is known about the molecular interactions among inflammatory responses that damage venous endothelial cells (vECs) during venous-to-arterial flow transition in vein graft diseases. Because arterial flow triggers excessive autophagy and inflammation in vECs, this study aimed to investigate the mediator of inflammation and methods to prevent vEC damage.

METHODS

Arterial laminar shear stress (ALSS; 12 dynes/cm²) was applied to vECs via in vitro and ex vivo perfusion systems. Inflammation in vECs was measured using inflammatory protein markers, NFκB translocation, cyclooxygenase-2 (COX-2) and COX-2 and NFκB promoter assays. The involvement of microRNA-4488 (miR-4488) was measured and confirmed by altering the specific miR using a miR-4488 mimic or inhibitor. The potential anti-inflammatory drugs and/or nitric oxide (NO) donor L-arginine (L-Arg) to prevent damage to vECs under ALSS was investigated.

RESULTS

ALSS triggered reactive oxygen species production, excessive autophagy, COX-2 protein expression, and NFκB translocation during vEC inflammation. Reduction in miR-4488 expression was detected in inflamed vECs treated with LPS, lipopolysaccharide (LPS) TNFα, and ALSS. Transfection of miR-4488 mimic (50 nM) prior to ALSS application inhibited the accumulation of inflammatory proteins as well as the translocation of NFκB. Combined treatment of vECs with COX-2-specific inhibitor (SC-236) and L-Arg alleviated the ALSS-induced inflammatory responses. Protective effects of the combined treatment on vECs against ALSS-induced damage were abolished by the application of miR-4488 inhibitor.

CONCLUSION

We showed that ALSS triggered the COX-2/NFκB pathway to induce vEC inflammation with a reduction in miR-4488. Combination of SC-236 and L-Arg prevented ALSS-induced vEC damage, thus, shows high potential for preventing vein graft diseases.

High spatial endothelial shear stress gradient independently predicts site of acute coronary plaque rupture and erosion

AIMS

To investigate local haemodynamics in the setting of acute coronary plaque rupture and erosion.

METHODS AND RESULTS

Intracoronary optical coherence tomography performed in 37 patients with acute coronary syndromes caused by plaque rupture (n = 19) or plaque erosion (n = 18) was used for three-dimensional reconstruction and computational fluid dynamics simulation. Endothelial shear stress (ESS), spatial ESS gradient (ESSG), and oscillatory shear index (OSI) were compared between plaque rupture and erosion through mixed-effects logistic regression. Lipid, calcium, macrophages, layered plaque, and cholesterol crystals were also analysed. By multivariable analysis, only high ESSG [odds ratio (OR) 5.29, 95% confidence interval (CI) 2.57-10.89, P < 0.001], lipid (OR 12.98, 95% CI 6.57-25.67, P < 0.001), and layered plaque (OR 3.17, 95% CI 1.82-5.50, P < 0.001) were independently associated with plaque rupture. High ESSG (OR 13.28, 95% CI 6.88-25.64, P < 0.001), ESS (OR 2.70, 95% CI 1.34-5.42, P = 0.005), and OSI (OR 2.18, 95% CI 1.33-3.54, P = 0.002) independently associated with plaque erosion. ESSG was higher at rupture sites than erosion sites [median (interquartile range): 5.78 (2.47-21.15) vs. 2.62 (1.44-6.18) Pa/mm, P = 0.009], OSI was higher at erosion sites than rupture sites [1.04 × 10-2 (2.3 × 10-3-4.74 × 10-2) vs. 1.29 × 10-3 (9.39 × 10-5-3.0 × 10-2), P < 0.001], but ESS was similar (P = 0.29).

CONCLUSIONS

High ESSG is independently associated with plaque rupture while high ESSG, ESS, and OSI associate with plaque erosion. While ESSG is higher at rupture sites than erosion sites, OSI is higher at erosion sites and ESS was similar. These results suggest that ESSG and OSI may play critical roles in acute plaque rupture and erosion, respectively.

Physicochemical Tools for Visualizing and Quantifying Cell-Generated Forces

To discern how mechanical forces coordinate biological outcomes, methods that map cell-generated forces in a spatiotemporal manner, and at cellular length scales, are critical. In their native environment, whether it be within compact multicellular three-dimensional structures or sparsely populated fibrillar networks of the extracellular matrix, cells are constantly exposed to a slew of physical forces acting on them from all directions. At the same time, cells exert highly localized forces of their own on their surroundings and on neighboring cells. Together, the generation and transmission of these forces can control diverse cellular activities and behavior as well as influence cell fate decisions. To thoroughly understand these processes, we must first be able to characterize and measure such forces. However, our experimental needs and technical capabilities are in discord-while it is apparent that we should study cell-generated forces within more biologically relevant 3D environments, this goal remains challenging because of caveats associated with complex "sensing-transduction-readout" modalities. In this Review, we will discuss the latest techniques for measuring cell-generated forces. We will highlight recent advances in traction force microscopy and examine new alternative approaches for quantifying cell-generated forces, both of individual cells and within 3D tissues. Finally, we will explore the future direction of novel cellular force-sensing tools in the context of mechanobiology and next-generation biomaterials design.

Quantifying hemodynamics within an aneurysm exposed to prolonged exercise levels

BACKGROUND AND OBJECTIVE

Non-invasive treatment of unruptured Abdominal Aortic Aneurysm involves subjecting the patients to certain physiological levels of the heart. Flow topology (Re_peak = 200-1200, frequency: f = 1.18-2.41 Hz) within an aneurysm geometry (2-D) under resting and exercise (mild and moderate) conditions are explored in the present study. Blood is assumed to be Newtonian in nature. Spatio-temporal evolution of the flow patterns and vorticity are established. Hemodynamic indicators (TAWSS and OSI), movement of vortex cores and Particle Residence Index (PRI) are quantified to select an optimum exercise level in attenuating the disease.

METHODS

The finite volume method is employed for numerical solutions using ANSYS-Fluent^Ⓡ software. The SIMPLE scheme has been used for the pressure-velocity coupling. Least Square cell-based method is used for the spatial discretization of the gradients. Second order upwind scheme is considered for discretization of the pressure term. Third order upwind (QUICK) scheme is used to discretize the momentum equation. First order Implicit Scheme was used for the discretization of the temporal terms. Discrete Phase Material (DPM) technique is employed throughout, to visualize the signature of particle deposits within the aneurysm.

RESULTS

Vortex impingement induces a pressure peak within the aneurysm (moderate) while the peaks are anchored at the proximal and distal ends under resting and mild conditions. Along the averaged flow separation zone, exercise increases the maximum TAWSS from 1.21 N/m² (mild) to 9.3 N/m² (moderate). The distal site is exposed to oscillatory loading (OSI = 0.5) under mild activity whereas the loading becomes distributed almost over the entire wall, when subjected to moderate conditions. This in turn, reduces the time involved in 50 percent clearance of particles (PRI = 0.5) from 10.56 s (resting) to 3.98 s (mild) and 0.87 s (moderate), respectively.

CONCLUSIONS

Resting conditions manifests the aneurysmal wall to recirculating fluid for most of cycle time. Moderate exercise exhibits the least particle clearance time, but it exposes the aneurysmal wall and the distal end to high pressure, which otherwise has low intensity under mild activity. This in turn establishes that mild exercise for prolonged duration can be an optimum level for non-invasive aneurysmal treatment.

Cellular microdomains for nitric oxide signaling in endothelium and red blood cells

There is accumulating evidence that biological membranes are not just homogenous lipid structures, but are highly organized in microdomains, i.e. compartmentalized areas of protein and lipid complexes, which facilitate necessary interactions for various signaling pathways. Each microdomain exhibits unique composition, membrane location and dynamics, which ultimately shape their functional characteristics. In the vasculature, microdomains are crucial for organizing and compartmentalizing vasodilatory signals that contribute to blood pressure homeostasis. In this review we aim to describe how membrane microdomains in both the endothelium and red blood cells allow context-specific regulation of the vasodilatory signal nitric oxide (NO) and its corresponding metabolic products, and how this results in tightly controlled systemic physiological responses. We will describe (1) structural characteristics of microdomains including lipid rafts and caveolae; (2) endothelial cell caveolae and how they participate in mechanosensing and NO-dependent mechanotransduction; (3) the myoendothelial junction of resistance arterial endothelial cells and how protein-protein interactions within it have profound systemic effects on blood pressure regulation, and (4) putative/proposed NO microdomains in RBCs and how they participate in control of systemic NO bioavailability. The sum of these discussions will provide a current view of NO regulation by cellular microdomains.

Investigation of the hemodynamic flow conditions and blood-induced stresses inside an abdominal aortic aneurysm by means of a SPH numerical model

The estimation of blood flow-induced loads occurring on the artery wall is affected by uncertainties hidden in the complex interaction of the pulsatile flow, the mechanical parameters of the artery, and the external support conditions. To circumvent these difficulties, a specific tool is developed by combining the aorta displacements measured by an electrocardiogram-gated-computed tomography angiography, with the blood velocity field computed by a smoothed particle hydrodynamics (SPH) numerical model. In the present work, the SPH model has been specifically adapted to the solution of the 3D Navier-Stokes equations inside a domain with boundaries of prescribed motion. Images of the abdominal aorta aneurysm (AAA) of a 44-year-old female patient were acquired during a stabilized cardiac cycle by electrocardiogram-gated-computed tomography angiography. The in vivo kinematic field inside the pulsating arterial wall was estimated by using recent technology, which makes it possible to follow the shape of the arterial wall during a cardiac cycle. We compare the flow conditions and the blood-induced loads, computed by the numerical model under the assumption of a moving arterial wall, with the corresponding results obtained assuming three rigid wall geometries of the vessel during the cardiac cycle. Significant differences were found for the wall shear stress distribution.

Endothelial Cell Mechano-Metabolomic Coupling to Disease States in the Lung Microvasculature

Lungs are the most vascular part of humans, accepting the totality of cardiac output in a volume much smaller than the body itself. Due to this cardiac output, the lung microvasculature is subject to mechanical forces including shear stress and cyclic stretch that vary with the cardiac and breathing cycle. Vessels are surrounded by extracellular matrix which dictates the stiffness which endothelial cells also sense and respond to. Shear stress, stiffness, and cyclic stretch are known to influence endothelial cell state. At high shear stress, endothelial cells exhibit cell quiescence marked by low inflammatory markers and high nitric oxide synthesis, whereas at low shear stress, endothelial cells are thought to "activate" into a pro-inflammatory state and have low nitric oxide. Shear stress' profound effect on vascular phenotype is most apparent in the arterial vasculature and in the pathophysiology of vascular inflammation. To conduct the flow of blood from the right heart, the lung microvasculature must be rigid yet compliant. It turns out that excessive substrate rigidity or stiffness is important in the development of pulmonary hypertension and chronic fibrosing lung diseases via excessive cell proliferation or the endothelial-mesenchymal transition. Recently, a new body of literature has evolved that couples mechanical sensing to endothelial phenotypic changes through metabolic signaling in clinically relevant contexts such as pulmonary hypertension, lung injury syndromes, as well as fibrosis, which is the focus of this review. Stretch, like flow, has profound effect on endothelial phenotype; metabolism studies due to stretch are in their infancy.

Mechanosensing and Mechanoregulation of Endothelial Cell Functions

Vascular endothelial cells (ECs) form a semiselective barrier for macromolecules and cell elements regulated by dynamic interactions between cytoskeletal elements and cell adhesion complexes. ECs also participate in many other vital processes including innate immune reactions, vascular repair, secretion, and metabolism of bioactive molecules. Moreover, vascular ECs represent a unique cell type exposed to continuous, time-dependent mechanical forces: different patterns of shear stress imposed by blood flow in macrovasculature and by rolling blood cells in the microvasculature; circumferential cyclic stretch experienced by the arterial vascular bed caused by heart propulsions; mechanical stretch of lung microvascular endothelium at different magnitudes due to spontaneous respiration or mechanical ventilation in critically ill patients. Accumulating evidence suggests that vascular ECs contain mechanosensory complexes, which rapidly react to changes in mechanical loading, process the signal, and develop context-specific adaptive responses to rebalance the cell homeostatic state. The significance of the interactions between specific mechanical forces in the EC microenvironment together with circulating bioactive molecules in the progression and resolution of vascular pathologies including vascular injury, atherosclerosis, pulmonary edema, and acute respiratory distress syndrome has been only recently recognized. This review will summarize the current understanding of EC mechanosensory mechanisms, modulation of EC responses to humoral factors by surrounding mechanical forces (particularly the cyclic stretch), and discuss recent findings of magnitude-specific regulation of EC functions by transcriptional, posttranscriptional and epigenetic mechanisms using -omics approaches. We also discuss ongoing challenges and future opportunities in developing new therapies targeting dysregulated mechanosensing mechanisms to treat vascular diseases. © 2019 American Physiological Society. Compr Physiol 9:873-904, 2019.

The Optimality Principle Decreases Hemodynamic Stresses for Aneurysm Initiation at Anterior Cerebral Artery Bifurcations

OBJECTIVE

To investigate hemodynamic stresses on anterior cerebral artery bifurcation apex and possible mechanism of the optimality principle in protecting bifurcation wall from supercharged hemodynamic stresses.

METHODS

Three-dimensional angiographic datasets of 122 patients with anterior communicating artery (Acom) aneurysms, 21 patients with non-Acom aneurysms, and 220 control subjects with no aneurysms were used. Radii of parent (r0) and daughter branches (r1 and r2) were measured, and bifurcations obeying the optimality principle required optimal caliber control of r0n = r1n + r2n, with the junction exponent n approximating 3. Radius ratio = r03/(r13 + r23) and n were compared between aneurysmal and control bifurcations. Blood flow was simulated for analysis of hemodynamic stresses.

RESULTS

Acom bifurcations in subjects without Acom aneurysms displayed optimal caliber radius, with mean radius ratio of 0.99 and n of 3.25, whereas Acom aneurysmal bifurcations had significantly lower radius ratio, 0.62 (P < 0.05), but higher n, 4.23 (P < 0.05). Peak wall shear stress and corresponding total pressure were significantly smaller for bifurcations obeying than disobeying the optimality principle (P < 0.001 and P < 0.05, respectively). Total pressures in the direct impinging center, peak wall shear stress distance, and anterior cerebral artery bifurcation angle all were significantly smaller for bifurcations obeying than disobeying the optimality principle (P < 0.05 and P < 0.001, respectively).

CONCLUSIONS

Normal anterior cerebral artery bifurcations obey the optimality principle whereas bifurcations with Acom aneurysms do not. Disobeying the optimality principle presents significantly enhanced hemodynamic stresses to possibly damage the bifurcation wall for aneurysm initiation.

4D flow MRI for the analysis of celiac trunk and mesenteric artery stenoses

PURPOSE

This study aims to assess the feasibility of 4D flow MRI measurements in complex vascular territories; namely, the celiac artery (CA) and superior mesenteric artery (SMA).

MATERIALS AND METHODS

In this prospective study, 22 healthy volunteers and 10 patients were scanned at 3 T. Blood flow parameters were compared between healthy volunteers and patients with stenosis of the CA and/or SMA as a function of stenosis grade characterized by prior contrast-enhanced computed tomography (CE-CT). The 4D flow MRI acquisition covered the CA, SMA and adjusting parts of the abdominal aorta (AO). Measurements of velocity- (peak velocity [PV], average velocity [AV]) and volume-related parameters (peak flow [PF], stroke volume [SV]) were conducted. Further, stenosis grade and wall shear stress in the CA, SMA and AO were evaluated.

RESULTS

In patients, prior evaluation by CE-CT revealed 11 low- and 5 mid-grade stenoses of the CA and/or SMA. PV and AV were significantly higher in patients than in healthy volunteers [PV: p < 0.0001; AV: p = 0.03, p < 0.001]. PF and SV did not differ significantly between healthy volunteers and patients; however, a trend towards lower PF and SV could be detected in patients with mid-grade stenoses. Comparison of 4D flow MRI with CE-CT revealed a strong positive correlation in estimated degree of stenosis (CA: r = 0.86, SMA: r = 0.98). Patients with mid-grade stenoses had a significantly higher average WSS magnitude (AWM) than healthy volunteers (p = 0.02).

CONCLUSION

This feasibility study suggests that 4D flow MRI is a viable technique for the evaluation of complex flow characteristics in small vessels such as the CA and SMA. 4D flow MRI approves comparable to the morphologic assessment of complex vascular territories using CE-CT but, in addition, offers the functional evaluation of flow parameters that goes beyond the morphology.

Characterization of vascular permeability using a biomimetic microfluidic blood vessel model

The inflammatory response in endothelial cells (ECs) leads to an increase in vascular permeability through the formation of gaps. However, the dynamic nature of vascular permeability and external factors involved is still elusive. In this work, we use a biomimetic blood vessel (BBV) microfluidic model to measure in real-time the change in permeability of the EC layer under culture in physiologically relevant flow conditions. This platform studies the dynamics and characterizes vascular permeability when the EC layer is triggered with an inflammatory agent using tracer molecules of three different sizes, and the results are compared to a transwell insert study. We also apply an analytical model to compare the permeability data from the different tracer molecules to understand the physiological and bio-transport significance of endothelial permeability based on the molecule of interest. A computational model of the BBV model is also built to understand the factors influencing transport of molecules of different sizes under flow. The endothelial monolayer cultured under flow in the BBV model was treated with thrombin, a serine protease that induces a rapid and reversible increase in endothelium permeability. On analysis of permeability data, it is found that the transport characteristics for fluorescein isothiocyanate (FITC) dye and FITC Dextran 4k Da molecules are similar in both BBV and transwell models, but FITC Dextran 70k Da molecules show increased permeability in the BBV model as convection flow (Peclet number > 1) influences the molecule transport in the BBV model. We also calculated from permeability data the relative increase in intercellular gap area during thrombin treatment for ECs in the BBV and transwell insert models to be between 12% and 15%. This relative increase was found to be within range of what we quantified from F-actin stained EC layer images. The work highlights the importance of incorporating flow in in vitro vascular models, especially in studies involving transport of large size objects such as antibodies, proteins, nano/micro particles, and cells.

Real-time imaging and quantitative analysis of doxorubicin transport in a perfusable microvessel platform

Here we report on real-time imaging and quantitative analysis of solute transport in perfusable cylindrical microvessels formed from Madin-Darby canine kidney (MDCK) cells embedded in a collagen matrix. Fluorescence microscopy was used to image the kinetics of doxorubicin transport following injection. To assess the role of efflux pumps on transport, experiments were performed in microvessels formed from MDCK.2, MDCKII-w/t, and MDCKII-MDR1 cells. MDCKII-w/t and MDCKII-MDR1 showed significant doxorubicin accumulation in the cells, characteristic of the pharmacokinetics of doxorubicin. We present a model for doxorubicin transport that takes into account transport across the cell layer. These results demonstrate how real-time imaging of cell microvessels can be used to analyze the mechanisms of transport and distribution following systemic delivery.

Traction Forces of Endothelial Cells under Slow Shear Flow

Endothelial cells are constantly exposed to fluid shear stresses that regulate vascular morphogenesis, homeostasis, and disease. The mechanical responses of endothelial cells to relatively high shear flow such as that characteristic of arterial circulation has been extensively studied. Much less is known about the responses of endothelial cells to slow shear flow such as that characteristic of venous circulation, early angiogenesis, atherosclerosis, intracranial aneurysm, or interstitial flow. Here we used a novel, to our knowledge, microfluidic technique to measure traction forces exerted by confluent vascular endothelial cell monolayers under slow shear flow. We found that cells respond to flow with rapid and pronounced increases in traction forces and cell-cell stresses. These responses are reversible in time and do not involve reorientation of the cell body. Traction maps reveal that local cell responses to slow shear flow are highly heterogeneous in magnitude and sign. Our findings unveil a low-flow regime in which endothelial cell mechanics is acutely responsive to shear stress.

An orbital shear platform for real-time, in vitro endothelium characterization

Electrical impedance techniques have been used to characterize endothelium morphology, permeability, and motility in vitro. However, these impedance platforms have been limited to either static endothelium studies and/or induced laminar fluid flow at a constant, single shear stress value. In this work, we present a microfabricated impedance sensor for real-time, in vitro characterization of human umbilical vein endothelial cells (HUVECs) undergoing oscillatory hydrodynamic shear. Oscillatory shear was applied with an orbital shaker and the electrical impedance was measured by a microfabricated impedance chip with discrete electrodes positioned at radial locations of 0, 2.5, 5.0, 7.5, 10.0, and 12.5 mm from the center of the chip. Depending on their radial position within the circular orbital platform, HUVECs were exposed to shear values ranging between 0.6 and 6.71 dyne/cm(2) (according to numerical simulations) for 22 h. Impedance spectra were fit to an equivalent circuit model and the trans-endothelial resistance and monolayer's capacitance were extracted. Results demonstrated that, compared to measurements acquired before the onset of shear, cells at the center of the platform that experienced low steady shear stress (∼2.2 dyne/cm(2) ) had an average change in trans-endothelial resistance of 6.99 ± 4.06% and 1.78 ± 2.40% change in cell capacitance after 22 hours of shear exposure; cells near the periphery of the well (r = 12.5 mm) experienced transient shears (2.5-6.7 dyne/cm(2) ) and exhibited a greater change in trans-endothelial resistance (24.2 ± 10.8%) and cell capacitance (4.57 ± 5.39%). This study, demonstrates that the orbital shear platform provides a simple system that can capture and quantify the real-time cellular morphology as a result of induced shear stress. The orbital shear platform presented in this work, compared to traditional laminar platforms, subjects cells to more physiologically relevant oscillatory shear as well as exposes the sample to several shear values simultaneously. Biotechnol. Bioeng. 2016;113: 1336-1344. © 2015 Wiley Periodicals, Inc.

A Computational Model for Biomechanical Effects of Arterial Compliance Mismatch

Background. Compliance mismatch is a negative factor and it needs to be considered in arterial bypass grafting. Objective. A computational model was employed to investigate the effects of arterial compliance mismatch on blood flow, wall stress, and deformation. Methods. The unsteady blood flow was assumed to be laminar, Newtonian, viscous, and incompressible. The vessel wall was assumed to be linear elastic, isotropic, and incompressible. The fluid-wall interaction scheme was constructed using the finite element method. Results. The results show that there are identical wall shear stress waveforms, wall stress, and strain waveforms at different locations. The comparison of the results demonstrates that wall shear stresses and wall strains are higher while wall stresses are lower at the more compliant section. The differences promote the probability of intimal thickening at some locations. Conclusions. The model is effective and gives satisfactory results. It could be extended to all kinds of arteries with complicated geometrical and material factors.

A comparative review of the hemodynamics and pathogenesis of cerebral and abdominal aortic aneurysms: lessons to learn from each other

OBJECTIVE

Cerebral aneurysms (CAs) and abdominal aortic aneurysms (AAAs) are degenerative vascular pathologies that manifest as abnormal dilations of the arterial wall. They arise with different morphologies in different types of blood vessels under different hemodynamic conditions. Although treated as different pathologies, we examine common pathways in their hemodynamic pathogenesis in order to elucidate mechanisms of formation.

MATERIALS AND METHODS

A systematic review of the literature was performed. Current concepts on pathogenesis and hemodynamics were collected and compared.

RESULTS

CAs arise as saccular dilations on the cerebral arteries of the circle of Willis under high blood flow, high wall shear stress (WSS), and high wall shear stress gradient (WSSG) conditions. AAAs arise as fusiform dilations on the infrarenal aorta under low blood flow, low, oscillating WSS, and high WSSG conditions. While at opposite ends of the WSS spectrum, they share high WSSG, a critical factor in arterial remodeling. This alone may not be enough to initiate aneurysm formation, but may ignite a cascade of downstream events that leads to aneurysm development. Despite differences in morphology and the structure, CAs and AAAs share many histopathological and biomechanical characteristics. Endothelial cell damage, loss of elastin, and smooth muscle cell loss are universal findings in CAs and AAAs. Increased matrix metalloproteinases and other proteinases, reactive oxygen species, and inflammation also contribute to the pathogenesis of both aneurysms.

CONCLUSION

Our review revealed similar pathways in seemingly different pathologies. We also highlight the need for cross-disciplinary studies to aid in finding similarities between pathologies.

Applying shear stress to endothelial cells in a new perfusion chamber: hydrodynamic analysis

Perfusion bioreactors have been proved to be an impartible part of vascular tissue engineering due to its broad range of applications as a means to distribute nutrients within porous scaffold along with providing appropriate physical and mechanical stimuli. To better understand the mechanical phenomena inside a bioreactor, computational fluid dynamics (CFD) was adopted followed by a validation technique. The fluid dynamics of the media inside the bioreactor was modeled using the Navier-Stokes equation for incompressible fluids while convection through the scaffold was described by Brinkman's extension of Darcy's law for porous media. Flow within the reactor determined the orientation of endothelial cells on the scaffold. To validate flow patterns, streamlines and shear stresses, colorimetry technique was used following attained results from CFD. Our bioreactor was modeled to simulate the optimum condition and flow patterns over scaffold to culture ECs for in vitro experimentation. In such experiments, cells were attached firmly without significant detachment and more noticeably elongation process was triggered even shortly after start up.

Distinctive subcellular Akt-1 responses to shear stress in endothelial cells

Endothelial cells undergo a rapid cell-cell junction inclination following exposure to atheroprotective unidirectional flow. In contrast, atherosclerotic lesions correlate with a heterogeneous distribution of the junctional wall inclination in cells exposed to time-varying, reversing, and oscillatory flow as well as to low mean shear stress. However, the underlying biochemical events by which endothelial cells distinctively respond to unidirectional versus flow reversal remain unclear. Here, we show that the subcellular distribution of flow-induced Akt-1 phosphorylation in endothelial cells lining the mouse aorta varies depending on local hemodynamics. Activated Akt-1 accumulated in perinuclear areas of cells in regions predisposed to disturbed flow but were localized at the cell-cell junction in regions of high unidirectional laminar shear stress. In flow-adapted human endothelial cells, reversal in flow direction was associated within minutes with a subcellular concentration of phosphorylated Akt-1 at the upstream edge of cells. Interestingly, oscillatory flow (with a zero mean shear stress) failed to activate Akt-1, whereas a unidirectional pulsatile flow of similar amplitude induced an increase in Akt-1 phosphorylation. Finally, silencing of the G protein αq/11 subunit abrogated both flow-induced Akt-1 and GSK-3β activation. Together, these results characterize the existence of a Gαq/11-mediated Akt-1 signaling pathway that is dynamically responsive to flow direction, thereby offering a novel approach to regulating EC dysfunctions in regions subjected to flow reversal.

Lysophosphatidic acid induces shear stress-dependent contraction in mouse aortic strip in situ

We previously reported that lysophosphatidic acid (LPA) regulates Ca²⁺ influx of fluid flow in stimulated endothelial cells and that LPA and shear stress showed increment and suppressive effects on phenylephrine-induced vasoconstriction and acetylcholine-induced vasodilatation, respectively. However, a vasoconstrictive effect of LPA alone in the presence of shear stress was not found. The present study examined the effect of LPA alone in the presence of shear stress on Ca²⁺ responses in endothelial and smooth muscle cells and contraction in mouse aortic strip using real-time 2-photon laser scanning microscopy and a custom-made parallel-plate flow chamber. Application of micromolar LPA and high shear stress elicited movement of endothelial cells after Ca²⁺ responses. The endothelial cells moved along the major axis of smooth muscle cells, a direction that was identical to that found during vasoconstriction evoked by the application of phenylephrine. The frequency of Ca²⁺ oscillations in smooth muscle cells was highest according to endothelial movement. Vasoconstriction evoked by LPA and shear stress was significantly reduced by the application of a thromboxane A₂ receptor antagonist, a cyclooxygenase inhibitor, and a thromboxane synthase inhibitor. These results suggest that micromolar LPA and high shear stress elicit vasoconstriction that is caused by Ca²⁺-dependent contraction in medial smooth muscle cells. Thromboxane A₂ may be involved in that response.

Shear stress-induced redistribution of vascular endothelial-protein-tyrosine phosphatase (VE-PTP) in endothelial cells and its role in cell elongation

Vascular endothelial cells (ECs) are continuously exposed to shear stress (SS) generated by blood flow. Such stress plays a key role in regulation of various aspects of EC function including cell proliferation and motility as well as changes in cell morphology. Vascular endothelial-protein-tyrosine phosphatase (VE-PTP) is an R3-subtype PTP that possesses multiple fibronectin type III-like domains in its extracellular region and is expressed specifically in ECs. The role of VE-PTP in EC responses to SS has remained unknown, however. Here we show that VE-PTP is diffusely localized in ECs maintained under static culture conditions, whereas it undergoes rapid accumulation at the downstream edge of the cells relative to the direction of flow in response to SS. This redistribution of VE-PTP triggered by SS was found to require its extracellular and transmembrane regions and was promoted by integrin engagement of extracellular matrix ligands. Inhibition of actin polymerization or of Cdc42, Rab5, or Arf6 activities attenuated the SS-induced redistribution of VE-PTP. VE-PTP also underwent endocytosis in the static and SS conditions. SS induced the polarized distribution of internalized VE-PTP. Such an effect was promoted by integrin engagement of fibronectin but prevented by inhibition of Cdc42 activity or of actin polymerization. In addition, depletion of VE-PTP by RNA interference in human umbilical vein ECs blocked cell elongation in the direction of flow induced by SS. Our results suggest that the polarized redistribution of VE-PTP in response to SS plays an important role in the regulation of EC function by blood flow.

Inflammation and cerebral aneurysms

Cerebral aneurysms (CAs) occur in up to 5% of the population in the US, and up to 7% of all strokes are caused by CA rupture. Little is known about the pathophysiology of cerebral aneurysm formation, though inflammatory cells such as macrophages and neutrophils have been found in the walls of CAs. After many studies of both human specimens and experimentally induced animal models of aneurysms, the predominant model for CA formation and progression is as follows: (1) endothelial damage and degeneration of the elastic lamina, (2) inflammatory cell recruitment and infiltration, (3) and chronic remodeling of vascular wall. Endothelial damage can be caused by changes in hemodynamic stress, which results in the upregulation of proinflammatory cytokine secretion followed by the recruitment of various inflammatory cells. This recruitment and subsequent infiltration induces smooth muscle cell proliferation, apoptosis, and remodeling of the artery wall. These complex events are thought to lead to aneurysm rupture. This review will focus on the role of the immune system in the formation and progression of saccular CA and the ways in which the immune response may be modulated to treat aneurysms and prevent rupture.

High-speed AFM for scanning the architecture of living cells

We address the modelling of tip-cell membrane interactions under high speed atomic force microscopy. Using a home-made device with a scanning area of 100 × 100 μm(2), in situ imaging of living cells is successfully performed under loading rates from 1 to 50 Hz, intending to enable detailed descriptions of physiological processes in living samples.

Endothelial differentiation of mesenchymal stromal cells

Human mesenchymal stromal cells (hMSCs) are increasingly used in regenerative medicine for restoring worn-out or damaged tissue. Newly engineered tissues need to be properly vascularized and current candidates for in vitro tissue pre-vascularization are endothelial cells and endothelial progenitor cells. However, their use in therapy is hampered by their limited expansion capacity and lack of autologous sources. Our approach to engineering large grafts is to use hMSCs both as a source of cells for regeneration of targeted tissue and at the same time as the source of endothelial cells. Here we investigate how different stimuli influence endothelial differentiation of hMSCs. Although growth supplements together with shear force were not sufficient to differentiate hMSCs with respect to expression of endothelial markers such as CD31 and KDR, these conditions did prime the cells to differentiate into cells with an endothelial gene expression profile and morphology when seeded on Matrigel. In addition, we show that endothelial-like hMSCs are able to create a capillary network in 3D culture both in vitro and in vivo conditions. The expansion phase in the presence of growth supplements was crucial for the stability of the capillaries formed in vitro. To conclude, we established a robust protocol for endothelial differentiation of hMSCs, including an immortalized MSC line (iMSCs) which allows for reproducible in vitro analysis in further studies.

Impact of endothelium roughness on blood flow

Cell free layer (CFL), a plasma layer bounded by the red blood cell (RBC) core and the endothelium, plays an important physiological role. Its width affects the effective blood viscosity as well as the scavenging and production of nitric oxide (NO). Measurements of the CFL and its spatio-temporal variability are highly uncertain, exhibiting random fluctuations. Yet traditional models of blood flow and NO scavenging treat the CFL's bounding surfaces as deterministic and smooth. We investigate the effects of the endothelium roughness and uncertain (random) spatial variability on blood flow and the estimates of effective blood viscosity.

Modeling of shear stress experienced by endothelial cells cultured on microstructured polymer substrates in a parallel plate flow chamber

The application of physical stimuli to cell populations in tissue engineering and regenerative medicine may facilitate significant scientific and clinical advances. However, for the most part, these stimuli are evaluated in isolation, rather than in combination. This study was designed to combine two physical stimuli. The first being a microstructured tissue culture polystyrene substrate, known to produce changes in cell shape and orientation, and the second being laminar shear stress in a parallel plate flow chamber. The combined effects of these stimuli on endothelial cell monolayers cells were evaluated in a parallel plate flow chamber and using a computational fluid dynamics (CFD) model. The topography of the cell monolayers cultured on different microstructured surfaces was determined using confocal laser scanning microscopy (CLSM), and this topographic information was used to construct the CFD model. This research found that while the specific underlying structures were effectively planarized by the cell monolayer, significant differences in cell shape and orientation were observed on the different microstructured surfaces. Cells cultured on grooved substrates aligned in the direction of the grooves and showed higher retention after 1-h LSS conditioning than those cultured on pillars. The modeled shear stress distributions also showed differences. While minor differences in the magnitude of shear stress were noted, aligned cell monolayers experienced significantly lower spatial gradients of shear stress when compared with cells that were not pre-aligned by surface features. The results presented here provide an analysis of how one form of physical stimulus can be moderated by another and also provide a methodology by which the understanding of cell responses to topographic and mechanical stimuli can be further advanced.

Theoretical models for coronary vascular biomechanics: progress & challenges

A key aim of the cardiac Physiome Project is to develop theoretical models to simulate the functional behaviour of the heart under physiological and pathophysiological conditions. Heart function is critically dependent on the delivery of an adequate blood supply to the myocardium via the coronary vasculature. Key to this critical function of the coronary vasculature is system dynamics that emerge via the interactions of the numerous constituent components at a range of spatial and temporal scales. Here, we focus on several components for which theoretical approaches can be applied, including vascular structure and mechanics, blood flow and mass transport, flow regulation, angiogenesis and vascular remodelling, and vascular cellular mechanics. For each component, we summarise the current state of the art in model development, and discuss areas requiring further research. We highlight the major challenges associated with integrating the component models to develop a computational tool that can ultimately be used to simulate the responses of the coronary vascular system to changing demands and to diseases and therapies.

Vascular smooth muscle cell glycocalyx modulates shear-induced proliferation, migration, and NO production responses

The endothelial cell glycocalyx, a structure coating the luminal surface of the vascular endothelium, and its related mechanotransduction have been studied by many over the last decade. However, the role of vascular smooth muscle cells (SMCs) glycocalyx in cell mechanotransduction has triggered little attention. This study addressed the role of heparan sulfate proteoglycans (HSPGs), a major component of the glycocalyx, in the shear-induced proliferation, migration, and nitric oxide (NO) production of the rat aortic smooth muscle cells (RASMCs). A parallel plate flow chamber and a peristaltic pump were employed to expose RASMC monolayers to a physiological level of shear stress (12 dyn/cm(2)). Heparinase III (Hep.III) was applied to selectively degrade heparan sulfate on the SMC surface. Cell proliferation, migration, and NO production rates were determined and compared among the following four groups of cells: 1) untreated with no flow, 2) Hep.III treatment with no flow, 3) untreated with flow of 12 dyn/cm(2) exposure, and 4) Hep.III treatment with flow of 12 dyn/cm(2) exposure. It was observed that flow-induced shear stress significantly suppressed SMC proliferation and migration, whereas cells preferred to aligning along the direction of flow and NO production were enhanced substantially. However, those responses were not found in the cells with Hep.III treatment. Under flow condition, the heparinase III-treated cells remained randomly oriented and proliferated as if there were no flow presence. Disruption of HSPG also enhanced wound closure and inhibited shear-induced NO production significantly. This study suggests that HSPG may play a pivotal role in mechanotransduction of SMCs.

Discovery of novel mechanosensitive genes in vivo using mouse carotid artery endothelium exposed to disturbed flow

Recently, we showed that disturbed flow caused by a partial ligation of mouse carotid artery rapidly induces atherosclerosis. Here, we identified mechanosensitive genes in vivo through a genome-wide microarray study using mouse endothelial RNAs isolated from the flow-disturbed left and the undisturbed right common carotid artery. We found 62 and 523 genes that changed significantly by 12 hours and 48 hours after ligation, respectively. The results were validated by quantitative polymerase chain reaction for 44 of 46 tested genes. This array study discovered numerous novel mechanosensitive genes, including Lmo4, klk10, and dhh, while confirming well-known ones, such as Klf2, eNOS, and BMP4. Four genes were further validated for protein, including LMO4, which showed higher expression in mouse aortic arch and in human coronary endothelium in an asymmetric pattern. Comparison of in vivo, ex vivo, and in vitro endothelial gene expression profiles indicates that numerous in vivo mechanosensitive genes appear to be lost or dysregulated during culture. Gene ontology analyses show that disturbed flow regulates genes involved in cell proliferation and morphology by 12 hours, followed by inflammatory and immune responses by 48 hours. Determining the functional importance of these novel mechanosensitive genes may provide important insights into understanding vascular biology and atherosclerosis.

Vimentin induces changes in cell shape, motility, and adhesion during the epithelial to mesenchymal transition

Vimentin is used widely as a marker of the epithelial to mesenchymal transitions (EMTs) that take place during embryogenesis and metastasis, yet the functional implications of the expression of this type III intermediate filament (IF) protein are poorly understood. Using form factor analysis and quantitative Western blotting of normal, metastatic, and vimentin-null cell lines, we show that the level of expression of vimentin IFs (VIFs) correlates with mesenchymal cell shape and motile behavior. The reorganization of VIFs caused by expressing a dominant-negative mutant or by silencing vimentin with shRNA (neither of which alter microtubule or microfilament assembly) causes mesenchymal cells to adopt epithelial shapes. Following the microinjection of vimentin or transfection with vimentin cDNA, epithelial cells rapidly adopt mesenchymal shapes coincident with VIF assembly. These shape transitions are accompanied by a loss of desmosomal contacts, an increase in cell motility, and a significant increase in focal adhesion dynamics. Our results demonstrate that VIFs play a predominant role in the changes in shape, adhesion, and motility that occur during the EMT.

Heterogeneous expression of endothelial connexin (Cx) 37, Cx40, and Cx43 in rat large veins

Gap junctions are clusters of transmembrane protein channels for intercellular communication and are composed of connexin (Cx). The vascular endothelial cells express Cx37, Cx40, and Cx43. We herein examined the spatial distribution of the endothelial connexins Cx37, Cx40, and Cx43 in rat large veins including the cranial vena cava, thoracic section of the caudal vena cava, and abdominal section of the caudal vena cava. We also examined the mean size of the endothelial cells and quantified the protein expression levels of the endothelial connexins. We found that the large veins heterogeneously expressed Cx37, Cx40, and Cx43 as follows: Cx40 > Cx37 > > Cx43 in the cranial vena cava, Cx37 > Cx43 > > Cx40 in the thoracic section of the caudal vena cava, and Cx40 > Cx43 > > Cx37 in the abdominal section of the caudal vena cava. Double immunostaining of two of the endothelial connexins revealed that the gap-junction plaques were composed of various combinations of endothelial connexins. The mean size of the endothelial cells was large, moderate, or small in the cranial vena cava, the abdominal section of the caudal vena cava, or the thoracic section of the caudal vena cava, respectively. The heterogeneity of the endothelial cells of the rat large veins in terms of the connexin expression suggests that the endothelial cells are differently coupled in the large veins. The present data are useful for investigating, for example, disease-related alterations in expression of endothelial connexins in large veins.

Flow-Mediated Signaling Modulates Endothelial Cell Phenotype

The focal development of atherosclerosis in the vascular tree may be explained in part by the local nature of blood flow. Bifurcations and branching points, prone to early atherogenesis, experience disturbed and oscillatory flow, whereas straight vascular regions, resistant to atherosclerosis, are exposed to steady laminar flow. A large number of studies suggest that the antiatherosclerotic effects of laminar flow are in part due to the ability of flow to modulate endothelial cell phenotype. Under steady laminar flow, endothelial cells generate molecules that promote a vasoactive, anticoagulant, anti-inflammatory, and growth-inhibitory surface. In contrast, disturbed flow induces a proliferative, prothrombotic, and adhesive phenotype. Endothelial cells are able to sense the variations of flow via mechanosensitive cell surface proteins and to transduce these signals via intracellular pathways to transcription factors in the nucleus leading to phenotypic changes. This review summarizes the "outside-in" signaling events initiated by flow that modulate endothelial cell phenotype.

TRPV4 channels mediate cyclic strain-induced endothelial cell reorientation through integrin-to-integrin signaling

Cyclic mechanical strain produced by pulsatile blood flow regulates the orientation of endothelial cells lining blood vessels and influences critical processes such as angiogenesis. Mechanical stimulation of stretch-activated calcium channels is known to mediate this reorientation response; however, the molecular basis remains unknown. Here, we show that cyclically stretching capillary endothelial cells adherent to flexible extracellular matrix substrates activates mechanosensitive TRPV4 (transient receptor potential vanilloid 4) ion channels that, in turn, stimulate phosphatidylinositol 3-kinase-dependent activation and binding of additional beta1 integrin receptors, which promotes cytoskeletal remodeling and cell reorientation. Inhibition of integrin activation using blocking antibodies and knock down of TRPV4 channels using specific small interfering RNA suppress strain-induced capillary cell reorientation. Thus, mechanical forces that physically deform extracellular matrix may guide capillary cell reorientation through a strain-dependent "integrin-to-integrin" signaling mechanism mediated by force-induced activation of mechanically gated TRPV4 ion channels on the cell surface.

Insights into the mechanical properties of epithelial cells: the effects of shear stress on the assembly and remodeling of keratin intermediate filaments

The effects of shear stress on the keratin intermediate filament (KIF) cytoskeleton of cultured human alveolar epithelial (A549) cells have been investigated. Under normal culture conditions, immunofluorescence revealed a delicate network of fine tonofibrils containing KIFs, together with many nonfilamentous, keratin-containing "particles," mostly containing either keratin 8 (K8) or 18 (K18), but not both. Triton X-100 extracted approximately 10% of the cellular keratin, and this was accompanied by a loss of the particles but not the KIFs. Shear stress dramatically reduced the soluble keratin component and transformed the fine bundles of KIFs into thicker, "wavy" tonofibrils. Both effects were accompanied by the disappearance of most keratin particles and by increased phosphorylation of K8 and K18 on serine residues 73 and 33, respectively. The particles that remained after shearing were phosphorylated and were closely associated with KIFs. We suggest that keratin particles constitute a reservoir of protein that can be recruited into KIFs under flow, creating a more robust cytoskeleton able to withstand shear forces more effectively.

Mechanotransduction - a field pulling together?

Mechanical stresses are ever present in the cellular environment, whether through external forces that are applied to tissues or endogenous forces that are generated within the active cytoskeleton. Despite the wide array of studies demonstrating that such forces affect cellular signaling and function, it remains unclear whether mechanotransduction in different contexts shares common mechanisms. Here, I discuss possible mechanisms by which applied forces, cell-generated forces and changes in substrate mechanics could exert changes in cell function through common mechanotransduction machinery. I draw from examples that are primarily focused on the role of adhesions in transducing mechanical forces. Based on this discussion, emerging themes arise that connect these different areas of inquiry and suggest multiple avenues for future studies.

Shear stress regulates aquaporin-5 and airway epithelial barrier function

As the interface with the outside world, the airway epithelial barrier is critical to lung defense. Because of respiratory efforts, the airways are exposed to shear stress; however, little is known regarding the effects of shear on epithelial function. We report that low-level shear stress enhances epithelial barrier function, an effect that requires serial activation of the transient receptor potential vanilloid (TRPV) 4 and L-type voltage-gated calcium channel (VGCC) and an increase in intracellular calcium. These changes lead to a selective decrease in aquaporin-5 (AQP5) abundance because of protein internalization and degradation. To determine whether AQP5 plays a role in mediating the shear effects on paracellular permeability, we overexpressed hAQP5 in 16HBE cells, an airway epithelial cell line without endogenous AQP5. We found that AQP5 expression was needed for shear-induced barrier enhancement. These findings have direct relevance to the regulation of epithelial barrier function, membrane permeability, and water homeostasis in the respiratory epithelia.

Cell mechanics: integrating cell responses to mechanical stimuli

Forces are increasingly recognized as major regulators of cell structure and function, and the mechanical properties of cells are essential to the mechanisms by which cells sense forces, transmit them to the cell interior or to other cells, and transduce them into chemical signals that impact a spectrum of cellular responses. Comparison of the mechanical properties of intact cells with those of the purified cytoskeletal biopolymers that are thought to dominate their elasticity reveal the extent to which the studies of purified systems can account for the mechanical properties of the much more heterogeneous and complex cell. This review summarizes selected aspects of current work on cell mechanics with an emphasis on the structures that are activated in cell-cell contacts, that regulate ion flow across the plasma membrane, and that may sense fluid flow that produces low levels of shear stress.

Vascular prostheses: performance related to cell-shear responses

BACKGROUND

This work concerned the endothelialization of vascular prostheses and subsequent improvement of functionality with respect to tissue engineering. The aim of the study was to investigate the initial, pre-shear stress cellular behavior with respect to three vascular biomaterials to explain subsequent cellular responses to physiological shear stresses.

MATERIALS AND METHODS

Expanded polytetrafluoroethylene (ePTFE), polyethyleneterephthalate (polyester; Dacron; PET), and electrostatically spun polyurethane (PU) (all pre-impregnated with collagen I/III) were cell-seeded with L929 immortalized murine fibroblasts or human umbilical vein endothelial cells (HUVECs). Cytoskeletal involvement, cell height profiles, and immunohistochemistry were examined after 7 d static culture.

RESULTS

All three vascular biomaterials demonstrated different structures. Cell behavior varied both between the materials and the two cell types: cytoskeletal involvement was greater for the HUVECs and the more fibrous surfaces; height profiles were greater for the L929 and PET, and lowest on PU. Immunohistochemistry of HUVEC samples also showed differences: PU revealed the greatest expression of intercellular adhesion molecule-1 and E-selectin (PET and ePTFE the lowest, respectively); ePTFE produced the greatest for vascular cell adhesion molecule-1 (PET the lowest).

CONCLUSIONS

Material substrate influenced the cellular response. Cells demonstrating firm adhesion increased their cytoskeletal processes and expression of cell-substratum and inter-cellular adhesion markers, which may explain their ability to adapt more readily to shear stress. The fibrous PU structure appeared to be most suited to further shear stress exposure. This study demonstrated the potential of the underlying vascular material to affect the long-term cellular functionality of the prosthesis.

Mechanosensor Channels in Mammalian Somatosensory Neurons

Mechanoreceptive sensory neurons innervating the skin, skeletal muscles and viscera signal both innocuous and noxious information necessary for proprioception, touch and pain. These neurons are responsible for the transduction of mechanical stimuli into action potentials that propagate to the central nervous system. The ability of these cells to detect mechanical stimuli impinging on them relies on the presence of mechanosensitive channels that transduce the external mechanical forces into electrical and chemical signals. Although a great deal of information regarding the molecular and biophysical properties of mechanosensitive channels in prokaryotes has been accumulated over the past two decades, less is known about the mechanosensitive channels necessary for proprioception and the senses of touch and pain. This review summarizes the most pertinent data on mechanosensitive channels of mammalian somatosensory neurons, focusing on their properties, pharmacology and putative identity.

MAC mode atomic force microscopy studies of living samples, ranging from cells to fresh tissue

Magnetic AC mode (MAC mode) atomic force microscopy (AFM), a novel type of tapping mode AFM in which the cantilever is driven directly by a magnetic field, is a powerful tool for imaging with high spatial resolution and better signal-to-noise in liquid environment. It may largely extend the application of AFM to living samples, especially those are sensitive to cantilever forces, even to multilayer tissue samples. However, there are few reports on the imaging of living cells by MAC mode AFM previously. In our present study, we explore the optimal imaging conditions of MAC mode AFM on living astrocytes and fresh arterial intima surface. We also used nude tips for PicoTREC panel (i.e., Aux in BNC, a new data collecting channel) to image living samples and discussed its difference with phase imaging. We show that living biological samples can be imaged by MAC mode AFM at details of comparable resolution as those by high resolution scanning electron microscopy. Furthermore, the combination of height, amplitude, phase and TREC panel signals provide abundant informations for the characteristics of living samples, such as topography, profile, stiffness and adhesion.