Two major xylanases of Trichoderma reesei

Creating a novel genetic diversity of Trichoderma afroharzianum by γ-radiation for xylanase-cellulase production

Creating novel sources of a microbial strain using induced mutation can increase enzyme production for industrial use. According to this, we have developed a mutant strain of Trichoderma afroharzianum by Co60 gamma irradiation. Trichoderma mutants were isolated from an optimum dose of 250 Gy. The qualitative and quantitative screening were used for evaluating their enzyme production and the DNA barcoding method was used to identify the best Trichoderma mutant isolates. The highest cellulase (exo-glucanase, endoglucanase, β-glucosidase, and total cellulase) and xylanase activities were observed in superior mutant isolates of Trichoderma afroharzianum NAS107-M44 and Trichoderma afroharzianum NAS107-M82, which is approximately 1.6-2.5 times higher than its parent strain, respectively. The electrophoretic pattern of proteins showed that the exo-glucanase I, endo-glucanase III, and the xylanase I enzymes hydrolyzed the corn bran, synergistically. Overall, gamma irradiation-induced mutation could be an expedient technique to access such superior mutants for the bioconversion of corn bran wastes.

Inhibitory effect of lignin on the hydrolysis of xylan by thermophilic and thermolabile GH11 xylanases

Background

Enzymatic hydrolysis of lignocellulosic biomass into platform sugars can be enhanced by the addition of accessory enzymes, such as xylanases. Lignin from steam pretreated biomasses is known to inhibit enzymes by non-productively binding enzymes and limiting access to cellulose. The effect of enzymatically isolated lignin on the hydrolysis of xylan by four glycoside hydrolase (GH) family 11 xylanases was studied. Two xylanases from the mesophilic Trichoderma reesei, TrXyn1, TrXyn2, and two forms of a thermostable metagenomic xylanase Xyl40 were compared.

Results

Lignin isolated from steam pretreated spruce decreased the hydrolysis yields of xylan for all the xylanases at 40 and 50 °C. At elevated hydrolysis temperature of 50 °C, the least thermostable xylanase TrXyn1 was most inhibited by lignin and the most thermostable xylanase, the catalytic domain (CD) of Xyl40, was least inhibited by lignin. Enzyme activity and binding to lignin were studied after incubation of the xylanases with lignin for up to 24 h at 40 °C. All the studied xylanases bound to lignin, but the thermostable xylanases retained 22–39% of activity on the lignin surface for 24 h, whereas the mesophilic T. reesei xylanases become inactive. Removing of N-glycans from the catalytic domain of Xyl40 increased lignin inhibition in hydrolysis of xylan when compared to the glycosylated form. By comparing the 3D structures of these xylanases, features contributing to the increased thermal stability of Xyl40 were identified.

Conclusions

High thermal stability of xylanases Xyl40 and Xyl40-CD enabled the enzymes to remain partially active on the lignin surface. N-glycosylation of the catalytic domain of Xyl40 increased the lignin tolerance of the enzyme. Thermostability of Xyl40 was most likely contributed by a disulphide bond and salt bridge in the N-terminal and α-helix regions.

Graphical Abstract

Elimination of the Sugar Transporter GAT1 Increased Xylanase I Production in Trichoderma reesei

The filamentous fungus Trichoderma reesei secretes large quantities of cellulases and hemicellulases that have found wide applications in industry. Compared with extensive studies on the mechanism controlling cellulase gene expression, less is known about the regulatory mechanism behind xylanase gene expression. Herein, several putative sugar transporter encoding genes that showed significant upregulation on xylan were identified in T. reesei. Deletion of one such gene, gat1, resulted in increased xylanase production but hardly affected cellulase induction. Further analyses demonstrated that deletion of gat1 markedly increased XYNI production at the transcriptional level and only exerted a minor effect on XYNII synthesis. In contrast, overexpressing gat1 caused a continuous decrease in xyn1 expression. Deletion of gat1 also affected the expression of xyn1 and pectinase genes when T. reesei was cultivated with galacturonic acid as the sole carbon source. Transcriptome analyses of Δgat1 and its parental strain identified 255 differentially expressed genes that are enriched in categories of glycoside hydrolases, lipid metabolism, transporters, and transcriptional factors. The results thus implicate a repressive role of the sugar transporter GAT1 in xyn1 expression and reveal that distinct regulatory mechanisms may exist in controlling the expression of different xylanase genes in T. reesei.

Comparison of Glycoside Hydrolase family 3 β-xylosidases from basidiomycetes and ascomycetes reveals evolutionarily distinct xylan degradation systems

Xylan is the most common hemicellulose in plant cell walls, though the structure of xylan polymers differs between plant species. Here, to gain a better understanding of fungal xylan degradation systems, which can enhance enzymatic saccharification of plant cell walls in industrial processes, we conducted a comparative study of two glycoside hydrolase family 3 (GH3) β-xylosidases (Bxls), one from the basidiomycete Phanerochaete chrysosporium (PcBxl3), and the other from the ascomycete Trichoderma reesei (TrXyl3A). A comparison of the crystal structures of the two enzymes, both with saccharide bound at the catalytic center, provided insight into the basis of substrate binding at each subsite. PcBxl3 has a substrate-binding pocket at subsite -1, while TrXyl3A has an extra loop that contains additional binding subsites. Furthermore, kinetic experiments revealed that PcBxl3 degraded xylooligosaccharides faster than TrXyl3A, while the K_M values of TrXyl3A were lower than those of PcBxl3. The relationship between substrate specificity and degree of polymerization of substrates suggested that PcBxl3 preferentially degrades xylobiose (X₂), while TrXyl3A degrades longer xylooligosaccharides. Moreover, docking simulation supported the existence of extended positive subsites of TrXyl3A in the extra loop located at the N-terminus of the protein. Finally, phylogenetic analysis suggests that wood-decaying basidiomycetes use Bxls such as PcBxl3 that act efficiently on xylan structures from woody plants, whereas molds use instead Bxls that efficiently degrade xylan from grass. Our results provide added insights into fungal efficient xylan degradation systems.

Cellulose Nanofibers for Encapsulation and Pluripotency Preservation in the Early Development of Embryonic Stem Cells

Materials for three-dimensional cultures aim to reproduce the function of the extracellular matrix, enabling cell adhesion and growth by remodeling the environment. However, embryonic stem cells (ESCs) must develop in environments that prevent adhesion and preserve their pluripotency. In this study, we used cellulose nanofiber hydrogels to mimic the developing conditions required for ESCs. These plant-based hydrogels are simultaneously biocompatible and exogenous to mammalian cells, preventing remodeling and attachment. The storage modulus of these hydrogels could be fine-tuned by varying the degree of oxidation to enable selective degradation. The ESCs proliferated in the artificial environment, forming increasingly large embryoid bodies for 15 days. Unlike traditional cultures in which ESCs begin differentiating upon the removal of the chemical inhibition, the expression of pluripotency markers in the ESC population remained high for the entire two weeks. Cellulase from Trichoderma reesei was used to retrieve the ESC cultures selectively. The proposed unique system is a prospective model with which to study the early development of embryonic cells, as well as a nonchemical method of preserving undifferentiated populations of ESCs.

High-resolution crystal structure and biochemical characterization of a GH11 endoxylanase from Nectria haematococca

Enzymatic degradation of vegetal biomass offers versatile procedures to improve the production of alternative fuels and other biomass-based products. Here we present the three-dimensional structure of a xylanase from Nectria haematococca (NhGH11) at 1.0 Å resolution and its functional properties. The atomic resolution structure provides details and insights about the complex hydrogen bonding network of the active site region and allowed a detailed comparison with homologous structures. Complementary biochemical studies showed that the xylanase can catalyze the hydrolysis of complex xylan into simple xylose aldopentose subunits of different lengths. NhGH11 can catalyze the efficient breakdown of beechwood xylan, xylan polysaccharide, and wheat arabinoxylan with turnover numbers of 1730.6 ± 318.1 min^-1, 1648.2 ± 249.3 min^-1 and 2410.8 ± 517.5 min^-1 respectively. NhGH11 showed maximum catalytic activity at pH 6.0 and 45 °C. The mesophilic character of NhGH11 can be explained by distinct structural features in comparison to thermophilic GH11 enzymes, including the number of hydrogen bonds, side chain interactions and number of buried water molecules. The enzymatic activity of NhGH11 is not very sensitive to metal ions and chemical reagents that are typically present in associated industrial production processes. The data we present highlights the potential of NhGH11 to be applied in industrial biomass degradation processes.

GH11 xylanase from Aspergillus tamarii Kita: Purification by one-step chromatography and xylooligosaccharides hydrolysis monitored in real-time by mass spectrometry

The present study describes the one-step purification and biochemical characterization of an endo-1,4-β-xylanase from Aspergillus tamarii Kita. Extracellular xylanase was purified to homogeneity 7.43-fold through CM-cellulose. Enzyme molecular weight and pI were estimated to be 19.5kDa and 8.5, respectively. The highest activity of the xylanase was obtained at 60°C and it was active over a broad pH range (4.0-9.0), with maximal activity at pH 5.5. The enzyme was thermostable at 50°C, retaining more than 70% of its initial activity for 480min. The K_0.5 and V_max values on beechwood xylan were 8.13mg/mL and 1,330.20μmol/min/mg of protein, respectively. The ions Ba²⁺ and Ni²⁺, and the compounds β-mercaptoethanol and DTT enhanced xylanase activity, while the heavy metals (Co²⁺, Cu²⁺, Hg⁺, Pb²⁺ and Zn²⁺) strongly inhibited the enzyme, at 5mM. Enzymatic hydrolysis of xylooligosaccharides monitored in real-time by mass spectrometer showed that the shortest xylooligosaccharide more efficiently hydrolyzed by A. tamarii Kita xylanase corresponded to xylopentaose. In agreement, HPLC analyzes did not detect xylopentaose among the hydrolysis products of xylan. Therefore, this novel GH11 endo-xylanase displays a series of physicochemical properties favorable to its application in the food, feed, pharmaceutical and paper industries.

Lignin-derived inhibition of monocomponent cellulases and a xylanase in the hydrolysis of lignocellulosics

Non-productive enzyme binding onto lignin is the major inhibitory mechanism, which reduces hydrolysis rates and yields and prevents efficient enzyme recycling in the hydrolysis of lignocellulosics. The detailed mechanisms of binding are still poorly understood. Enzyme-lignin interactions were investigated by comparing the structural properties and binding behaviour of fungal monocomponent enzymes, cellobiohydrolases TrCel7A and TrCel6A, endoglucanases TrCel7B and TrCel5A, a xylanase TrXyn11 and a β-glucosidase AnCel3A, onto lignins isolated from steam pretreated spruce and wheat straw. The enzymes exhibited decreasing affinity onto lignin model films in the following order: TrCel7B>TrCel6A>TrCel5A>AnCel3A>TrCel7A>TrXyn11. As analysed in Avicel hydrolysis, TrCel6A and TrCel7B were most inhibited by lignin isolated from pretreated spruce. This could be partially explained by adsorption of the enzyme onto the lignin surface. Enzyme properties, such as enzyme surface charge, thermal stability or surface hydrophobicity could not alone explain the adsorption behaviour.

Trichoderma reesei xylanase 5 is defective in the reference strain QM6a but functional alleles are present in other wild-type strains

Trichoderma reesei is a paradigm for the regulation and industrial production of plant cell wall-degrading enzymes. Among these, five xylanases, including the glycoside hydrolase (GH) family 11 XYN1 and XYN2, the GH10 XYN3, and the GH30 XYN4 and XYN6, were described. By genome mining and transcriptome analysis, a further putative xylanase, encoded by xyn5, was identified. Analysis of xyn5 from the genome-sequenced reference strain T. reesei QM6a shows that it encodes a non-functional, truncated form of XYN5. However, non-truncated orthologues are present in other genome sequenced Trichoderma spp., and sequencing of xyn5 in other T. reesei wild-type isolates shows that they harbor a putative functional xyn5 allele. In silico analysis and 3D modeling revealed that the encoded XYN5 has significant structural similarities to xylanases of the GH11 family, including a GH-typical substrate binding groove and a carboxylate pair in the active site. The xyn5 of wild-type strain TUCIM1282 was recombinantly expressed in a T. reesei strain with a (hemi)cellulase-free background and the corresponding protein purified to apparent homogeneity. The pH and temperature optima and the kinetic parameters of the purified XYN5 were pH 4, 50 °C, and V_max = 2646 nkat/mg with a K_m of 9.68 mg/ml. This functional xyn5 allele was used to replace the mutated version which led to an overall increase of the xylanolytic activity. These findings are of particular importance as GH11 xylanases are of high biotechnological relevance, and T. reesei is one of the main industrial producers of such lignocellulose-degrading enzymes.

Understanding Longitudinal Wood Fiber Ultra-structure for Producing Cellulose Nanofibrils Using Disk Milling with Diluted Acid Prehydrolysis

Here we used dilute oxalic acid to pretreat a kraft bleached Eucalyptus pulp (BEP) fibers to facilitate mechanical fibrillation in producing cellulose nanofibrils using disk milling with substantial mechanical energy savings. We successfully applied a reaction kinetics based combined hydrolysis factor (CHFX) as a severity factor to quantitatively control xylan dissolution and BEP fibril deploymerization. More importantly, we were able to accurately predict the degree of polymerization (DP) of disk-milled fibrils using CHFX and milling time or milling energy consumption. Experimentally determined ratio of fibril DP and number mean fibril height (diameter d), DP/d, an aspect ratio measurer, were independent of the processing conditions. Therefore, we hypothesize that cellulose have a longitudinal hierarchical structure as in the lateral direction. Acid hydrolysis and milling did not substantially cut the "natural" chain length of cellulose fibrils. This cellulose longitudinal hierarchical model provides support for using weak acid hydrolysis in the production of cellulose nanofibrils with substantially reduced energy input without negatively affecting fibril mechanical strength.

Binding of cellulose binding modules reveal differences between cellulose substrates

The interaction between cellulase enzymes and their substrates is of central importance to several technological and scientific challenges. Here we report that the binding of cellulose binding modules (CBM) from Trichoderma reesei cellulases Cel6A and Cel7A show a major difference in how they interact with substrates originating from wood compared to bacterial cellulose. We found that the CBM from TrCel7A recognizes the two substrates differently and as a consequence shows an unexpected way of binding. We show that the substrate has a large impact on the exchange rate of the studied CBM, and moreover, CBM-TrCel7A seems to have an additional mode of binding on wood derived cellulose but not on cellulose originating from bacterial source. This mode is not seen in double CBM (DCBM) constructs comprising both CBM-TrCel7A and CBM-TrCel6A. The linker length of DCBMs affects the binding properties, and slows down the exchange rates of the proteins and thus, can be used to analyze the differences between the single CBM. These results have impact on the cellulase research and offer new understanding on how these industrially relevant enzymes act.

C-Terminal proline-rich sequence broadens the optimal temperature and pH ranges of recombinant xylanase from Geobacillus thermodenitrificans C5

Efficient utilization of hemicellulose entails high catalytic capacity containing xylanases. In this study, proline rich sequence was fused together with a C-terminal of xylanase gene from Geobacillus thermodenitrificans C5 and designated as GthC5ProXyl. Both GthC5Xyl and GthC5ProXyl were expressed in Escherichia coli BL21 host in order to determine effect of this modification. The C-terminal oligopeptide had noteworthy effects and instantaneously extended the optimal temperature and pH ranges and progressed the specific activity of GthC5Xyl. Compared with GthC5Xyl, GthC5ProXyl revealed improved specific activity, a higher temperature (70°C versus 60°C) and pH (8 versus 6) optimum, with broad ranges of temperature and pH (60-80°C and 6.0-9.0 versus 40-60°C and 5.0-8.0, respectively). The modified enzyme retained more than 80% activity after incubating in xylan for 3h at 80°C as compared to wild -type with only 45% residual activity. Our study demonstrated that proper introduction of proline residues on C-terminal surface of xylanase family might be very effective in improvement of enzyme thermostability. Moreover, this study reveals an engineering strategy to improve the catalytic performance of enzymes.

Improvement of thermostability and activity of Trichoderma reesei endo-xylanase Xyn III on insoluble substrates

Trichoderma reesei Xyn III, an endo-β-1,4-xylanase belonging to glycoside hydrolase family 10 (GH10), is vital for the saccharification of xylans in plant biomass. However, its enzymatic thermostability and hydrolytic activity on insoluble substrates are low. To overcome these difficulties, the thermostability of Xyn III was improved using random mutagenesis and directed evolution, and its hydrolytic activity on insoluble substrates was improved by creating a chimeric protein. In the screening of thermostable Xyn III mutants from a random mutagenesis library, we identified two amino acid residues, Gln286 and Asn340, which are important for the thermostability of Xyn III. The Xyn III Gln286Ala/Asn340Tyr mutant showed xylanase activity even after heat treatment at 60 °C for 30 min or 50 °C for 96 h, indicating a dramatic enhancement in thermostability. In addition, we found that the addition of a xylan-binding domain (XBD) to the C-terminal of Xyn III improved its hydrolytic activity on insoluble xylan.

Comparison of three deep eutectic solvents and 1-ethyl-3-methylimidazolium acetate in the pretreatment of lignocellulose: effect on enzyme stability, lignocellulose digestibility and one-pot hydrolysis

The use of [EMIM]AcO and three DESs was compared in lignocellulose pretreatment with focus on cellulase stability, effects on lignocellulose and enzymatic hydrolysis of pretreated lignocellulose in both buffer and in solutions of ionic liquid or DES.

Direct determination of protonation states and visualization of hydrogen bonding in a glycoside hydrolase with neutron crystallography

Glycoside hydrolase (GH) enzymes apply acid/base chemistry to catalyze the decomposition of complex carbohydrates. These ubiquitous enzymes accept protons from solvent and donate them to substrates at close to neutral pH by modulating the pKa values of key side chains during catalysis. However, it is not known how the catalytic acid residue acquires a proton and transfers it efficiently to the substrate. To better understand GH chemistry, we used macromolecular neutron crystallography to directly determine protonation and ionization states of the active site residues of a family 11 GH at multiple pD (pD=pH+0.4) values. The general acid glutamate (Glu) cycles between two conformations, upward and downward, but is protonated only in the downward orientation. We performed continuum electrostatics calculations to estimate the pKa values of the catalytic Glu residues in both the apo- and substrate-bound states of the enzyme. The calculated pKa of the Glu increases substantially when the side chain moves down. The energy barrier required to rotate the catalytic Glu residue back to the upward conformation, where it can protonate the glycosidic oxygen of the substrate, is 4.3 kcal/mol according to free energy simulations. These findings shed light on the initial stage of the glycoside hydrolysis reaction in which molecular motion enables the general acid catalyst to obtain a proton from the bulk solvent and deliver it to the glycosidic oxygen.

The effects of extracellular pH and of the transcriptional regulator PACI on the transcriptome of Trichoderma reesei

Background

Extracellular pH is one of the several environmental factors affecting protein production by filamentous fungi. Regulatory mechanisms ensure that extracellular enzymes are produced under pH-conditions in which the enzymes are active. In filamentous fungi, the transcriptional regulation in different ambient pH has been studied especially in Aspergilli, whereas the effects of pH in the industrial producer of hydrolytic enzymes, Trichoderma reesei, have mainly been studied at the protein level. In this study, the pH-dependent expression of T. reesei genes was investigated by genome-wide transcriptional profiling and by analysing the effects of deletion of the gene encoding the transcriptional regulator pac1, the orthologue of Aspergillus nidulans pacC gene.

Results

Transcriptional analysis revealed the pH-responsive genes of T. reesei, and functional classification of the genes identified the activities most affected by changing pH. A large number of genes encoding especially transporters, signalling-related proteins, extracellular enzymes and proteins involved in different metabolism-related functions were found to be pH-responsive. Several cellulase- and hemicellulase-encoding genes were found among the pH-responsive genes. Especially, genes encoding hemicellulases with the similar type of activity were shown to include both genes up-regulated at low pH and genes up-regulated at high pH. However, relatively few of the cellulase- and hemicellulase-encoding genes showed direct PACI-mediated regulation, indicating the importance of other regulatory mechanisms affecting expression in different pH conditions. New information was gained on the effects of pH on the genes involved in ambient pH-signalling and on the known and candidate regulatory genes involved in regulation of cellulase and hemicellulase encoding genes. In addition, co-regulated genomic clusters responding to change of ambient pH were identified.

Conclusions

Ambient pH was shown to be an important determinant of T. reesei gene expression. The pH-responsive genes, including those affected by the regulator of ambient pH sensing, were identified, and novel information on the activity of genes encoding carbohydrate active enzymes at different pH was gained.

Electronic supplementary material

The online version of this article (doi:10.1186/s12934-015-0247-z) contains supplementary material, which is available to authorized users.

High-level expression and characterization of a thermostable xylanase mutant from Trichoderma reesei in Pichia pastoris

A gene encoding xylanase 2 mutant from Trichoderma reesei (T2C/T28C, named mxyn2) was cloned into the Pichia pastoris X33 strain using the vector pPICZαA. Recombinant Mxyn2p was functionally expressed in P. pastoris X33 and secreted into the supernatant. Real time qPCR demonstrated that an increase in gene copy number correlated with higher levels of expression. Supernatant from methanol induced cells was concentrated by ultrafiltration with a 10kDa cut off membrane, and purified with ion exchange chromatography using SP Sepharose Fast Flow chromatography. Recombinant Mxyn2p protein had the highest activity at 75°C, while recombinant protein encoded by the "wild type" xylanase gene xyn2, also expressed in Pichia, was 20°C lower. The Mxyn2p enzyme retained more than 70% of its activity after incubation at 80°C for 10min. The effects of the optimal pH and temperature for higher expression levels in P. pastoris were also determined, 6.0 and 22°C, respectively. The maximum xylanase activity of Mxyn2p was 13,000nkat/mg (9.88g/l) in fed-batch cultivation after 168h induction with methanol in a 50l bioreactor.

Effect of Temperature on Xylanase II from Trichoderma reesei QM 9414: A Calorimetric, Catalytic, and Conformational Study

The secondary structure of xylanase II from Trichoderma reesei is lost in an apparent irreversible cooperative process as temperature is increased with a midpoint transition of 58.8 ± 0.1°C. The shift of the spectral centre of mass above 50°C is also apparently cooperative with midpoint transition of 56.3 ± 0.2°C, but the existence of two isofluorescent points in the fluorescence emission spectra suggests a non-two-state process. Further corroboration comes from differential scanning calorimetry experiments. At protein concentrations ≤0.56 mg·mL⁻¹ the calorimetric transition is reversible and the data were fitted to a non-two-state model and deconvoluted into six transitions, whereas at concentrations greater than 0.56 mg·mL⁻¹ the calorimetric transition is irreversible with an exothermic contribution to the thermogram. The apparent T_m increased linearly with the scan rate according to first order inactivation kinetics. The effect of additives on the calorimetric transition of xylanase is dependent on their nature. The addition of sorbitol transforms reversible transitions into irreversible transitions while stabilizing the protein as the apparent T_m increases linearly with sorbitol concentration. d-Glucono-1,5-lactone, a noncompetitive inhibitor in xylanase kinetics, and soluble xylan change irreversible processes into reversible processes at high protein concentration.

Trichoderma reesei XYN VI--a novel appendage-dependent eukaryotic glucuronoxylan hydrolase

Expression of a Trichoderma reesei gene coding for a putative GH30 xylanase in Aspergillus oryzae led to isolation and purification of a novel xylanase exhibiting catalytic properties different from those of the previously characterized GH30 xylanase XYN IV of T. reesei. The novel enzyme, named XYN VI, exhibited catalytic properties similar to appendage-dependent GH30 glucuronoxylanases previously recognized only in bacteria. XYN VI showed high specific activity only on xylans or xylooligosaccharides containing 4-O-methyl-D-glucuronic acid or D-glucuronic acid side substituents. The cleavage of the main chain takes place primarily at the second glycosidic linkage from the branch towards the reducing end of the polysaccharides or aldouronic acids. These catalytic properties resemble bacterial GH30 glucuronoxylanases, although the recognition of the uronic acid side chains by XYN VI is apparently based on interaction of the substrate with other amino acids. Moreover, in contrast to bacterial enzymes, XYN VI is also capable of slower but significant cleavage of unsubstituted parts of xylan and acidic xylooligosaccharides. The data point to a great catalytic diversity of xylanases produced by the most extensively studied cellulolytic fungus.

Mixtures of thermostable enzymes show high performance in biomass saccharification

Optimal enzyme mixtures of six Trichoderma reesei enzymes and five thermostable enzyme components were developed for the hydrolysis of hydrothermally pretreated wheat straw, alkaline oxidised sugar cane bagasse and steam-exploded bagasse by statistically designed experiments. Preliminary studies to narrow down the optimization parameters showed that a cellobiohydrolase/endoglucanase (CBH/EG) ratio of 4:1 or higher of thermostable enzymes gave the maximal CBH-EG synergy in the hydrolysis of hydrothermally pretreated wheat straw. The composition of optimal enzyme mixtures depended clearly on the substrate and on the enzyme system studied. The optimal enzyme mixture of thermostable enzymes was dominated by Cel7A and required a relatively high amount of xylanase, whereas with T. reesei enzymes, the high proportion of Cel7B appeared to provide the required xylanase activity. The main effect of the pretreatment method was that the required proportion of xylanase was higher and the proportion of Cel7A lower in the optimized mixture for hydrolysis of alkaline oxidised bagasse than steam-exploded bagasse. In prolonged hydrolyses, less Cel7A was generally required in the optimal mixture. Five-component mixtures of thermostable enzymes showed comparable hydrolysis yields to those of commercial enzyme mixtures.

The use of nanofibrillar cellulose hydrogel as a flexible three-dimensional model to culture human pluripotent stem cells

Human embryonic stem cells and induced pluripotent stem cells have great potential in research and therapies. The current in vitro culture systems for human pluripotent stem cells (hPSCs) do not mimic the three-dimensional (3D) in vivo stem cell niche that transiently supports stem cell proliferation and is subject to changes which facilitate subsequent differentiation during development. Here, we demonstrate, for the first time, that a novel plant-derived nanofibrillar cellulose (NFC) hydrogel creates a flexible 3D environment for hPSC culture. The pluripotency of hPSCs cultured in the NFC hydrogel was maintained for 26 days as evidenced by the expression of OCT4, NANOG, and SSEA-4, in vitro embryoid body formation and in vivo teratoma formation. The use of a cellulose enzyme, cellulase, enables easy cell propagation in 3D culture as well as a shift between 3D and two-dimensional cultures. More importantly, the removal of the NFC hydrogel facilitates differentiation while retaining 3D cell organization. Thus, the NFC hydrogel represents a flexible, xeno-free 3D culture system that supports pluripotency and will be useful in hPSC-based drug research and regenerative medicine.

Carbohydrate-binding modules (CBMs) revisited: reduced amount of water counterbalances the need for CBMs

BACKGROUND

A vast number of organisms are known to produce structurally diversified cellulases capable of degrading cellulose, the most abundant biopolymer on earth. The generally accepted paradigm is that the carbohydrate-binding modules (CBMs) of cellulases are required for efficient saccharification of insoluble substrates. Based on sequence data, surprisingly more than 60% of the cellulases identified lack carbohydrate-binding modules or alternative protein structures linked to cellulases (dockerins). This finding poses the question about the role of the CBMs: why would most cellulases lack CBMs, if they are necessary for the efficient hydrolysis of cellulose?

RESULTS

The advantage of CBMs, which increase the affinity of cellulases to substrates, was found to be diminished by reducing the amount of water in the hydrolytic system, which increases the probability of enzyme-substrate interaction. At low substrate concentration (1% w/w), CBMs were found to be more important in the catalytic performance of the cellobiohydrolases TrCel7A and TrCel6A of Trichoderma reesei as compared to that of the endoglucanases TrCel5A and TrCel7B. Increasing the substrate concentration while maintaining the enzyme-to-substrate ratio enhanced adsorption of TrCel7A, independent of the presence of the CBM. At 20% (w/w) substrate concentration, the hydrolytic performance of cellulases without CBMs caught up with that of cellulases with CBMs. This phenomenon was more noticeable on the lignin-containing pretreated wheat straw as compared to the cellulosic Avicel, presumably due to unproductive adsorption of enzymes to lignin.

CONCLUSIONS

Here we propose that the water content in the natural environments of carbohydrate-degrading organisms might have led to the evolution of various substrate-binding structures. In addition, some well recognized problems of economical saccharification such as unproductive binding of cellulases, which reduces the hydrolysis rate and prevents recycling of enzymes, could be partially overcome by omitting CBMs. This finding could help solve bottlenecks of enzymatic hydrolysis of lignocelluloses and speed up commercialization of second generation bioethanol.

Xylan as limiting factor in enzymatic hydrolysis of nanocellulose

The role of xylan as a limiting factor in the enzymatic hydrolysis of cellulose was studied by hydrolysing nanocellulose samples prepared by mechanical fibrillation of birch pulp with varying xylan content. Analyzing the nanocelluloses and their hydrolysis residues with dynamic FT-IR spectroscopy revealed that a certain fraction of xylan remained tightly attached to cellulose fibrils despite partial hydrolysis of xylan with xylanase prior to pulp fibrillation and that this fraction remained in the structure during the hydrolysis of nanocellulose with cellulase mixture as well. Thus, a loosely bound fraction of xylan was predicted to have been more likely removed by purified xylanase. The presence of loosely bound xylan seemed to limit the hydrolysis of crystalline cellulose, indicated by an increase in cellulose crystallinity and by preserved crystal width measured with wide-angle X-ray scattering. Removing loosely bound xylan led to a proportional hydrolysis of xylan and cellulose with the cellulase mixture.

Xylanase gene transcription in Trichoderma reesei is triggered by different inducers representing different hemicellulosic pentose polymers

The ascomycete Trichoderma reesei is a paradigm for the regulation and production of plant cell wall-degrading enzymes, including xylanases. Four xylanases, including XYN1 and XYN2 of glycosyl hydrolase family 11 (GH11), the GH10 XYN3, and the GH30 XYN4, were already described. By genome mining, we identified a fifth xylanase, XYN5, belonging to GH11. Transcriptional analysis reveals that the expression of all xylanases but xyn3 is induced by D-xylose, dependent on the cellulase and xylanase regulator XYR1 and negatively regulated by the carbon catabolite repressor CRE1. Impairment of D-xylose catabolism at the D-xylose reductase and xylitol dehydrogenase step strongly enhanced induction by D-xylose. Knockout of the L-xylulose reductase-encoding gene lxr3, which connects the D-xylose and L-arabinose catabolic pathways, had no effect on xylanase induction. Besides the induction by D-xylose, the T. reesei xylanases were also induced by L-arabinose, and this induction was also enhanced in knockout mutants in L-arabinose reductase (xyl1), L-arabitol dehydrogenase (lad1), and L-xylulose reductase (lxr3). Induction by L-arabinose was also XYR1 dependent. Analysis of intracellular polyols revealed accumulation of xylitol in all strains only during incubation with D-xylose and accumulation of L-arabitol only during incubation with L-arabinose. Induction by L-arabinose could be further stimulated by addition of D-xylose. We conclude that the expression of the T. reesei xylanases can be induced by both D-xylose and L-arabinose, but independently of each other and by using different inducing metabolites.

Xylanase XYN IV from Trichoderma reesei showing exo- and endo-xylanase activity

A minor xylanase, named XYN IV, was purified from the cellulolytic system of the fungus Trichoderma reesei Rut C30. The enzyme was discovered on the basis of its ability to attack aldotetraohexenuronic acid (HexA-2Xyl-4Xyl-4Xyl, HexA(3)Xyl(3)), releasing the reducing-end xylose residue. XYN IV exhibited catalytic properties incompatible with previously described endo-β-1,4-xylanases of this fungus, XYN I, XYN II and XYN III, and the xylan-hydrolyzing endo-β-1,4-glucanase EG I. XYN IV was able to degrade several different β-1,4-xylans, but was inactive on β-1,4-mannans and β-1,4-glucans. It showed both exo-and endo-xylanase activity. Rhodymenan, a linear soluble β-1,3-β-1,4-xylan, was as the best substrate. Linear xylooligosaccharides were attacked exclusively at the first glycosidic linkage from the reducing end. The gene xyn4, encoding XYN IV, was also isolated. It showed clear homology with xylanases classified in glycoside hydrolase family 30, which also includes glucanases and mannanases. The xyn4 gene was expressed slightly when grown on xylose and xylitol, clearly on arabinose, arabitol, sophorose, xylobiose, xylan and cellulose, but not on glucose or sorbitol, resembling induction of other xylanolytic enzymes from T. reesei. A recombinant enzyme prepared in a Pichia pastoris expression system exhibited identical catalytic properties to the enzyme isolated from the T. reesei culture medium. The physiological role of this unique enzyme remains unknown, but it may involve liberation of xylose from the reducing end of branched oligosaccharides that are resistant toward β-xylosidase and other types of endoxylanases. In terms of its catalytic properties, XYN IV differs from bacterial GH family 30 glucuronoxylanases that recognize 4-O-methyl-D-glucuronic acid (MeGlcA) substituents as substrate specificity determinants.

Comparative Analysis of End Point Enzymatic Digests of Arabino-Xylan Isolated from Switchgrass (Panicum virgatum L) of Varying Maturities using LC-MSn

Switchgrass (Panicum virgatum L., SG) is a perennial grass presently used for forage and being developed as a bioenergy crop for conversion of cell wall carbohydrates to biofuels. Up to 50% of the cell wall associated carbohydrates are xylan. SG was analyzed for xylan structural features at variable harvest maturities. Xylan from each of three maturities was isolated using classical alkaline extraction to yield fractions (Xyl A and B) with varying compositional ratios. The Xyl B fraction was observed to decrease with plant age. Xylan samples were subsequently prepared for structure analysis by digesting with pure endo-xylanase, which preserved side-groups, or a commercial carbohydrase preparation favored for biomass conversion work. Enzymatic digestion products were successfully permethylated and analyzed by reverse-phase liquid chromatography with mass spectrometric detection (RP-HPLC-MSn). This method is advantageous compared to prior work on plant biomass because it avoids isolation of individual arabinoxylan oligomers. The use of RP-HPLC- MSn differentiated 14 structural oligosaccharides (d.p. 3-9) from the monocomponent enzyme digestion and nine oligosaccharide structures (d.p. 3-9) from hydrolysis with a cellulase enzyme cocktail. The distribution of arabinoxylan oligomers varied depending upon the enzyme(s) applied but did not vary with harvest maturity.

Production and characterization of acidophilic xylanolytic enzymes from Penicillium oxalicum GZ-2

Multiple acidophilic xylanolytic enzymes were produced by Penicillium oxalicum GZ-2 during growth on wheat straw, rice straw, corn stover, and wheat bran. The expression of xylanase isoforms was dependent on substrate type and nitrogen source. The zymograms produced by the SDS-PAGE resolution of the crude enzymes indicated that wheat straw was the best inducer, resulting in the highest xylanase (115.2U/mL) and β-xylosidase (89mU/mL) activities during submerged fermentation. The optimum temperature and pH for xylanase activity were 50°C and 4.0, respectively; however, the crude xylanase enzymes exhibited remarkable stability over a broad pH range and showed more than 90% activity at 50°C for 30min at pH 4.0-8.0. The results revealed that P. oxalicum GZ-2 is a promising acidophilic xylanase-producing microorganism that has great potential to be used in biofuels, animal feed, and food industry applications.

Reed canary grass as a feedstock for 2nd generation bioethanol production

The enzymatic hydrolysis and fermentation of reed canary grass, harvested in the spring or autumn, and barley straw were studied. Steam pretreated materials were efficiently hydrolysed by commercial enzymes with a dosage of 10-20FPU/g d.m. Reed canary grass harvested in the spring was hydrolysed more efficiently than the autumn-harvested reed canary grass. Additional β-glucosidase improved the release of glucose and xylose during the hydrolysis reaction. The hydrolysis rate and level of reed canary grass with a commercial Trichoderma reesei cellulase could be improved by supplementation of purified enzymes. The addition of CBH II improved the hydrolysis level by 10% in 48hours' hydrolysis. Efficient mixing was shown to be important for hydrolysis already at 10% dry matter consistency. The highest ethanol concentration (20g/l) and yield (82%) was obtained with reed canary grass at 10% d.m. consistency.

Re-annotation of the CAZy genes of Trichoderma reesei and transcription in the presence of lignocellulosic substrates

BACKGROUND

Trichoderma reesei is a soft rot Ascomycota fungus utilised for industrial production of secreted enzymes, especially lignocellulose degrading enzymes. About 30 carbohydrate active enzymes (CAZymes) of T. reesei have been biochemically characterised. Genome sequencing has revealed a large number of novel candidates for CAZymes, thus increasing the potential for identification of enzymes with novel activities and properties. Plenty of data exists on the carbon source dependent regulation of the characterised hydrolytic genes. However, information on the expression of the novel CAZyme genes, especially on complex biomass material, is very limited.

RESULTS

In this study, the CAZyme gene content of the T. reesei genome was updated and the annotations of the genes refined using both computational and manual approaches. Phylogenetic analysis was done to assist the annotation and to identify functionally diversified CAZymes. The analyses identified 201 glycoside hydrolase genes, 22 carbohydrate esterase genes and five polysaccharide lyase genes. Updated or novel functional predictions were assigned to 44 genes, and the phylogenetic analysis indicated further functional diversification within enzyme families or groups of enzymes. GH3 β-glucosidases, GH27 α-galactosidases and GH18 chitinases were especially functionally diverse. The expression of the lignocellulose degrading enzyme system of T. reesei was studied by cultivating the fungus in the presence of different inducing substrates and by subjecting the cultures to transcriptional profiling. The substrates included both defined and complex lignocellulose related materials, such as pretreated bagasse, wheat straw, spruce, xylan, Avicel cellulose and sophorose. The analysis revealed co-regulated groups of CAZyme genes, such as genes induced in all the conditions studied and also genes induced preferentially by a certain set of substrates.

CONCLUSIONS

In this study, the CAZyme content of the T. reesei genome was updated, the discrepancies between the different genome versions and published literature were removed and the annotation of many of the genes was refined. Expression analysis of the genes gave information on the enzyme activities potentially induced by the presence of the different substrates. Comparison of the expression profiles of the CAZyme genes under the different conditions identified co-regulated groups of genes, suggesting common regulatory mechanisms for the gene groups.

Enzyme-aided alkaline extraction of oligosaccharides and polymeric xylan from hardwood kraft pulp

In this paper we describe the effect of enzyme treatments on the production of polymeric xylan, oligosaccharides and hemicellulose lean pulp by alkaline extraction of bleached hardwood kraft pulp. Enzyme treatments were carried out before one or in between two subsequent alkaline extractions by purified Trichoderma reesei xylanase and endoglucanase II (Cel 5a) as well as by a commercial monocomponent endoglucanase (FibreCareR). Without enzyme pre-treatment 61% and 7% of the pulp xylan was extracted in high purity in the first and second alkaline stage, respectively. Higher molecular mass xylan was obtained in the second than in the first alkaline extraction. Xylanase treatment before alkaline extraction hydrolyzed up to 12% of xylan to xylooligosaccharides. According to our results, preparation of polymeric xylan, and/or oligosaccharides as well as hemicellulose lean pulp with cellulose content of 93-94%, is possible by enzyme-aided alkaline extraction process.

Tricholoma matsutake dominates diverse microbial communities in different forest soils

Fungal and actinobacterial communities were analyzed together with soil chemistry and enzyme activities in order to profile the microbial diversity associated with the economically important mushroom Tricholoma matsutake. Samples of mycelium-soil aggregation (shiro) were collected from three experimental sites where sporocarps naturally formed. PCR was used to confirm the presence and absence of matsutake in soil samples. PCR-denaturing gradient gel electrophoresis (DGGE) fingerprinting and direct sequencing were used to identify fungi and actinobacteria in the mineral and organic soil layers separately. Soil enzyme activities and hemicellulotic carbohydrates were analyzed in a productive experimental site. Soil chemistry was investigated in both organic and mineral soil layers at all three experimental sites. Matsutake dominated in the shiro but also coexisted with a high diversity of fungi and actinobacteria. Tomentollopsis sp. in the organic layer above the shiro and Piloderma sp. in the shiro correlated positively with the presence of T. matsutake in all experimental sites. A Thermomonosporaceae bacterium and Nocardia sp. correlated positively with the presence of T. matsutake, and Streptomyces sp. was a common cohabitant in the shiro, although these operational taxonomic units (OTUs) did not occur at all sites. Significantly higher enzyme activity levels were detected in shiro soil. These enzymes are involved in the mobilization of carbon from organic matter decomposition. Matsutake was not associated with a particular soil chemistry compared to that of nearby sites where the fungus does not occur. The presence of a significant hemicellulose pool and the enzymes to degrade it indicates the potential for obtaining carbon from the soil rather than tree roots.

Synergistic action of xylanase and mannanase improves the total hydrolysis of softwood

The impact of xylan and glucomannan hydrolysis on cellulose hydrolysis was studied on five pretreated softwood substrates with different xylan and glucomannan contents, both varying from 0.2% to 6.9%, using mixtures of purified enzymes. The supplementation of pure cellulase mixture with non-specific endoglucanase TrCel7B and xylanase TrXyn11 enhanced the hydrolysis of all substrates, except the steam pretreated spruce, by more than 50%. The addition of endo-β-mannanase increased the overall hydrolysis yield by 20-25%, liberating significantly more glucose than theoretically present in glucomannan. When supplemented together, xylanolytic and mannanolytic enzymes acted synergistically with cellulases. Moreover, a linear correlation was observed between the hydrolysis of polysaccharides, irrespective of the composition, indicating that glucomannan and xylan form a complex network of polysaccharides around the cellulosic fibres extending throughout the lignocellulosic matrix. Both hemicellulolytic enzymes are crucial as accessory enzymes when designing efficient mixtures for the total hydrolysis of lignocellulosic substrates containing both hemicelluloses.