Polymer Design and Development

Optimizing Electroconductive PPy-PCL Scaffolds for Enhanced Tissue Engineering Performance

The integration of electrically conductive materials is a promising approach in tissue regeneration research. The study presented focuses on the creation of electroconductive scaffolds made from polypyrrole-polycaprolactone (PPy-PCL) using optimal processing parameters. Utilizing Box-Behnken response surface methodology for in situ chemical polymerization of PPy, the scaffolds exhibited a maximum conductivity of 2.542 mS/cm. Morphological examination via scanning electron microscopy (SEM) indicated uniform dispersion of PPy particles within PCL fibers. Fourier transform infrared spectroscopy (FTIR) and energy dispersive x-ray (EDX) analysis validated the composition of the scaffolds, while mechanical testing revealed that the optimized scaffolds exhibit superior tensile strength and Young's modulus compared to scaffolds comprised only of PCL. The hydrophilicity of the scaffolds was improved considerably, transitioning from initially hydrophobic to fully hydrophilic for the optimum scaffold, making it suitable for tissue engineering applications. Cell viability assays, including MTT with L929 fibroblasts and Alamar Blue with bone marrow mesenchymal stem cells (bmMSCs), reflected no cytotoxicity. They showed an increase in metabolic activity, suggesting the capability of the scaffolds to support cellular functions. In conclusion, the in situ synthesis of PPy in the PCL matrix by optimizing the fabrication parameters resulted in conductive scaffolds with promising structural and functional properties for tissue engineering.

Engineering an Extracellular Matrix Mimic Using Hemoglobin Protein Nanofibrils

Extracellular matrix (ECM) is essential for tissue development, providing structural support and a microenvironment that is necessary for cells. As tissue engineering advances, there is a growing demand for ECM mimics. Polycaprolactone (PCL) is a commonly used synthetic polymer for ECM mimic materials. However, its biologically inactive surface limits its direct application in tissue engineering. Our study aimed to improve the biocompatibility of PCL by incorporating hemoglobin nanofibrils (HbFs) into PCL using an electrospinning technique. HbFs were formed from bovine hemoglobin (Hb) extracted from industrial byproducts and designed to offer PCL an improved cell adhesion property. The fabricated HbFs@PCL electrospun scaffold exhibits improved fibroblast adherence, proliferation, and deeper fibroblast infiltration into the scaffold compared with the pure PCL scaffold, indicating its potential to be an ECM mimic. This study represents the pioneering utilization of Hb-sourced nanofibrils in the electrospun PCL scaffolds for tissue engineering applications.

Advancing inflammatory skin disease therapy: Sustained tofacitinib release via electrospun fiber dressings

Inflammatory skin diseases are typically managed with semi-solid formulations such as creams and ointments. These treatments often fail to remain on the skin for long, as they can be easily wiped off by clothing, necessitating frequent reapplication throughout the day and resulting in poor patient adherence. Therefore, this study sought to fabricate an electrospun dressing as an alternative dosage form that provides a sustained release of the anti-inflammatory agent tofacitinib over three days. In this study, three types of electrospun fiber dressings - uniaxial, coaxial, and layer-by-layer - were produced and examined for their morphological, mechanical, and release characteristics. In addition to a comprehensive characterization, another objective was to analyze the drug permeation behavior from these fiber dressings on porcine skin, comparing their performance to that of a tofacitinib cream. The layer-by-layer system notably exhibited a delayed drug release, while the uniaxial and coaxial systems demonstrated an initial burst release. However, the permeation studies revealed no significant differences between these systems, underscoring the necessity of conducting such studies - a crucial aspect often overlooked in research on electrospun fiber dressings. Overall, this study highlights the potential of electrospun, drug-loaded dressings for the treatment of inflammatory skin diseases.

Expression, Purification and Biophysical Characterisation of Klebsiella Pneumoniae Protein Adenylyltransferase: A Systematic Integration of Empirical and Computational Modelling Approaches

Infections that are acquired due to a prolonged hospital stay and manifest 2 days following the admission of a patient to a health-care institution can be classified as hospital-acquired infections. Klebsiella pneumoniae (K. pneumoniae) has become a critical pathogen, posing serious concern globally due to the rising incidences of hypervirulent and carbapenem-resistant strains. Glutaredoxin is a redox protein that protects cells from oxidative stress as it associates with glutathione to reduce mixed disulfides. Protein adenylyltransferase (PrAT) is a pseudokinase with a proposed mechanism of transferring an AMP group from ATP to glutaredoxin. Inducing oxidative stress to the bacterium by inhibiting the activity of PrAT is a promising approach to combating its contribution to hospital-acquired infections. Thus, this study aims to overexpress, purify, and analyse the effects of ATP and Mg2+ binding to Klebsiella pneumoniae PrAT (KpPrAT). The pET expression system and nickel affinity chromatography were effective in expressing and purifying KpPrAT. Far-UV CD spectroscopy demonstrates that the protein is predominantly α-helical, even in the presence of Mg2+. Extrinsic fluorescence spectroscopy with ANS indicates the presence of a hydrophobic pocket in the presence of ATP and Mg2+, while mant-ATP studies allude to the potential nucleotide binding ability of KpPrAT. The presence of Mg2+ increases the thermostability of the protein. Isothermal titration calorimetry provides insight into the binding affinity and thermodynamic parameters associated with the binding of ATP to KpPrAT, with or without Mg2+. Conclusively, the presence of Mg2+ induces a conformation in KpPrAT that favours nucleotide binding.

Properties of biopolymer blends based on Rugulopteryx okamurae and hydrophobic polycaprolactone (PCL) and hydrophilic acylated soy protein isolated (SPIa)

The present study explored the utilization of Rugulopteryx okamurae (RO), an invasive brown seaweed, as a renewable raw material for plastic materials based on biopolymer blends. The goal of this study was to improve the previously observed poor mechanical properties of materials based on single biopolymer RO. To enhance these properties, two polymers with distinct hydrophobicities were incorporated into the formulation of different blends: hydrophobic polycaprolactone (PCL) and hydrophilic acylated soy protein isolate (SPIa). SPIa was derived from soy protein through a chemical modification process, introducing hydrophilic carboxyl groups. The addition of PCL significantly strengthened the blend, increasing the storage modulus (E'1 Hz) from ~ 110 to ~ 250 MPa. Conversely, SPIa incorporation resulted in softening, with E' values around 40 MPa. Both additives enhanced deformability proportionally to their concentrations, with SPIa exhibiting notably higher deformability, reaching a maximum deformation of ~ 23% for a RO/SPIa ratio of 25/75. In summary, the study demonstrates the feasibility of producing environmentally friendly blend materials based on RO, tailored for specific applications by incorporating suitable additives into the formulation. Therefore, PCL is recommended for applications susceptible to moisture effects, such as packaging, while SPIa is suggested for highly absorbent applications such as personal care or horticulture.

Extrusion-based 3D printing of osteoinductive scaffolds with a spongiosa-inspired structure

Critical-sized bone defects resulting from trauma, inflammation, and tumor resections are individual in their size and shape. Implants for the treatment of such defects have to consider biomechanical and biomedical factors, as well as the individual conditions within the implantation site. In this context, 3D printing technologies offer new possibilities to design and produce patient-specific implants reflecting the outer shape and internal structure of the replaced bone tissue. The selection or modification of materials used in 3D printing enables the adaption of the implant, by enhancing the osteoinductive or biomechanical properties. In this study, scaffolds with bone spongiosa-inspired structure for extrusion-based 3D printing were generated. The computer aided design process resulted in an up scaled and simplified version of the bone spongiosa. To enhance the osteoinductive properties of the 3D printed construct, polycaprolactone (PCL) was combined with 20% (wt) calcium phosphate nano powder (CaP). The implants were designed in form of a ring structure and revealed an irregular and interconnected porous structure with a calculated porosity of 35.2% and a compression strength within the range of the natural cancellous bone. The implants were assessed in terms of biocompatibility and osteoinductivity using the osteosarcoma cell line MG63 and patient-derived mesenchymal stem cells in selected experiments. Cell growth and differentiation over 14 days were monitored using confocal laser scanning microscopy, scanning electron microscopy, deoxyribonucleic acid (DNA) quantification, gene expression analysis, and quantitative assessment of calcification. MG63 cells and human mesenchymal stem cells (hMSC) adhered to the printed implants and revealed a typical elongated morphology as indicated by microscopy. Using DNA quantification, no differences for PCL or PCL-CaP in the initial adhesion of MG63 cells were observed, while the PCL-based scaffolds favored cell proliferation in the early phases of culture up to 7 days. In contrast, on PCL-CaP, cell proliferation for MG63 cells was not evident, while data from PCR and the levels of calcification, or alkaline phosphatase activity, indicated osteogenic differentiation within the PCL-CaP constructs over time. For hMSC, the highest levels in the total calcium content were observed for the PCL-CaP constructs, thus underlining the osteoinductive properties.

A facile method for anti-cancer drug encapsulation into polymersomes with a core-satellite structure

Polymersomes possess the self-assembly vesicular structure similar to liposomes. Although a variety of comparisons between polymersomes and liposomes in the aspects of physical properties, preparation and applications have been elaborated in many studies, few focus on their differences in drug encapsulation, delivery and release in vitro and in vivo. In the present work, we have provided a modified direct hydration method to encapsulate anti-cancer drug paclitaxel (PTX) into PEG-b-PCL constituted polymersomes (PTX@PS). In addition to advantages including narrow particle size distribution, high colloid stability and moderate drug-loading efficiency, we find that the loaded drug aggregate in small clusters and reside through the polymersome membrane, representing a unique core-satellite structure which might facilitate the sustained drug release. Compared with commercial liposomal PTX formulation (Lipusu^®), PTX@PS exhibited superb tumor cell killing ability underlain by multiple pro-apoptotic mechanisms. Moreover, endocytic process of PTX@PS significantly inhibits drug transporter P-gp expression which could be largely activated by free drug diffusion. In glioma mice models, it has also confirmed that PTX@PS remarkably eradicate tumors, which renders polymersomes as a promising alternative to liposomes as drug carriers in clinic.

Three-Dimensional Microfilament Printing of a Decellularized Extracellular Matrix (dECM) Bioink Using a Microgel Printing Bath for Nerve Graft Fabrication and the Effectiveness of dECM Graft Combined with a Polycaprolactone Conduit

Various synthetic and decellularized materials are being used to reconstruct peripheral nerve defects and replace autologous nerve grafts. In this study, we developed a microgel printing bath to three-dimensionally (3D) print a peripheral nervous system decellularized extracellular matrix nerve graft reinforced by a polycaprolactone (PCL) conduit. The straightforward fabrication method of an alginate microgel-supplemented printing bath allows a 30 μm filament resolution of a low viscous decellularized extracellular matrix hydrogel with neutral pH. When applied to a sciatic nerve defect model of rats, the total number of regenerated axons and relative gastrocnemius muscle weight ratio were comparable to those of the autologous nerve graft group. Meanwhile, the results were superior to those of the porcine decellularized nerve graft group or the 3D printed decellularized extracellular matrix graft group. This study will be the first step demonstrating that the 3D printed decellularized extracellular matrix (dECM) graft with a PCL conduit is an effective and reliable choice to replace an autologous nerve graft in the near future.

Pharmaceutical, Biomedical and Ophthalmic Applications of Biodegradable Polymers (BDPs): Literature and Patent Review

In the last few decades, the interest in biodegradable materials for biomedical applications has increased significantly. Both natural and synthetic biodegradable polymers (BDPs) have been broadly explored for various biomedical applications. These include sutures and wound dressings, screws for bone fracture, scaffolds in tissue engineering, implants, and other carriers for targeted and sustained release drug delivery. Owing to their unique characteristics, including their surface charge variable copolymer block and composition and film-forming properties, BDPs have been widely used as favourable materials for ophthalmic drug delivery. Mucoadhesive BDPs have been used in ophthalmic formulations to prolong drug retention time and improve bioavailability, allowing ophthalmic controlled release systems to design. Furthermore, BDPs-based implants, microneedles, and injectable nano- and micro-particles enabled ocular posterior segment targeting and, most importantly, circumvented the need for removing the delivery systems after application. This review outlines the major advances of BDPs and highlights the latest progress of employing natural and synthetic BDPs for various biomedical applications, emphasising the treatment and management of ophthalmic conditions.

Antibiotic-Loaded Polymersomes for Clearance of Intracellular Burkholderia thailandensis

Melioidosis caused by the facultative intracellular pathogen Burkholderia pseudomallei is difficult to treat due to poor intracellular bioavailability of antibiotics and antibiotic resistance. In the absence of novel compounds, polymersome (PM) encapsulation may increase the efficacy of existing antibiotics and reduce antibiotic resistance by promoting targeted, infection-specific intracellular uptake. In this study, we developed PMs composed of widely available poly(ethylene oxide)-polycaprolactone block copolymers and demonstrated their delivery to intracellular B. thailandensis infection using multispectral imaging flow cytometry (IFC) and coherent anti-Stokes Raman scattering microscopy. Antibiotics were tightly sequestered in PMs and did not inhibit the growth of free-living B. thailandensis. However, on uptake of antibiotic-loaded PMs by infected macrophages, IFC demonstrated PM colocalization with intracellular B. thailandensis and a significant inhibition of their growth. We conclude that PMs are a viable approach for the targeted antibiotic treatment of persistent intracellular Burkholderia infection.

Macromolecular cryoprotectants for the preservation of mammalian cell culture: lessons from crowding, overview and perspectives

Cryopreservation is a process used for the storage of mammalian cells at a very low temperature, in a state of 'suspended animation.' Highly effective and safe macromolecular cryoprotectants (CPAs) have gained significant attention as they obviate the toxicity of conventional CPAs like dimethyl sulfoxide (DMSO) and reduce the risks involved in the storage of cultures at liquid nitrogen temperatures. These agents provide cryoprotection through multiple mechanisms, involving extracellular and intracellular macromolecular crowding, thereby impacting the biophysical and biochemical dynamics of the freezing medium and the cryopreserved cells. These CPAs vary in their structures and physicochemical properties, which influence their cryoprotective activities. Moreover, the introduction of polymeric crowders in the cryopreservation media enables serum-free storage at low-DMSO concentrations and high-temperature vitrification of frozen cultures (-80 °C). This review highlights the need for macromolecular CPAs and describes their mechanisms of cryopreservation, by elucidating the role of crowding effects. It also classifies the macromolecules based on their chemistry and their structure-activity relationships. Furthermore, this article provides perspectives on the factors that may influence the outcomes of the cell freezing process or may help in designing and evaluating prospective macromolecules. This manuscript also includes case studies about cellular investigations that have been conducted to demonstrate the cryoprotective potential of macromolecular CPAs. Ultimately, this review provides essential directives that will further improve the cell cryopreservation process and may encourage the use of macromolecular CPAs to fortify basic, applied, and translational research.

Next-Generation Biomaterials for Culture and Manipulation of Stem Cells

Stem cell fate decisions are informed by physical and chemical cues presented within and by the extracellular matrix. Despite the generally attributed importance of extracellular cues in governing self-renewal, differentiation, and collective behavior, knowledge gaps persist with regard to the individual, synergistic, and competing effects that specific physiochemical signals have on cell function. To better understand basic stem cell biology, as well as to expand opportunities in regenerative medicine and tissue engineering, a growing suite of customizable biomaterials has been developed. These next-generation cell culture materials offer user-defined biochemical and biomechanical properties, increasingly in a manner that can be controlled in time and 3D space. This review highlights recent innovations in this regard, focusing on advances to culture and maintain stemness, direct fate, and to detect stem cell function using biomaterial-based strategies.