An aptasensor for ochratoxin A based on grafting of polyethylene glycol on a boron-doped diamond microcell

Stimuli-responsive biodegradable silica nanoparticles: From native structure designs to biological applications

Due to their inherent advantages, silica nanoparticles (SiNPs) have greatly potential applications as bioactive materials in biosensors/biomedicine. However, the long-term and nonspecific accumulation in healthy tissues may give rise to toxicity, thereby impeding their widespread clinical application. Hence, it is imperative and noteworthy to develop biodegradable and clearable SiNPs for biomedical purposes. Recently, the design of multi-stimuli responsive SiNPs to improve degradation efficiency under specific pathological conditions has increased their clinical trial potential as theranostic nanoplatform. This review comprehensively summaries the rational design and recent progress of biodegradable SiNPs under various internal and external stimuli for rapid in vivo degradation and clearance. In addition, the factors that affect the biodegradation of SiNPs are also discussed. We believe that this systematic review will offer profound stimulus and timely guide for further research in the field of SiNP-based nanosensors/nanomedicine.

Is chemical analysis suitable for detecting mycotoxins in agricultural commodities and foodstuffs?

The assessment of the risks of mycotoxins to humans through consuming contaminated foods resulted in specific legislation that evaluates the presence, quantities, and type of mycotoxins in agricultural commodities and foodstuffs. Thus, to ensure compliance with legislation, food safety and consumer health, the development of suitable analytical procedures for identifying and quantifying mycotoxins in the free or modified form, in low-concentration and in complex samples is necessary. This review reports the application of the modern chemical methods of analysis employed in mycotoxin detection in agricultural commodities and foodstuffs. It is reported extraction methods with reasonable accuracy and those present characteristics according to guidelines of Green Analytical Chemistry. Recent trends in mycotoxins detection using analytical techniques are presented and discussed, evaluating the robustness, precision, accuracy, sensitivity, and selectivity in the detection of different classes of mycotoxins. Sensitivity coming from modern chromatographic techniques allows the detection of very low concentrations of mycotoxins in complex samples. However, it is essential the development of more green, fast and more suitable accuracy extraction methods for mycotoxins, which agricultural commodities producers could use. Despite the high number of research reporting the use of chemically modified voltammetric sensors, mycotoxins detection still has limitations due to the low selectivity from similar chemical structures of mycotoxins. Furthermore, spectroscopic techniques are rarely employed due to the limited number of reference standards for calibration procedures.

Design of terbium (III)-functionalized covalent organic framework as a selective and sensitive turn-on fluorescent switch for ochratoxin A monitoring

For the first time, we develop a terbium (III)-functionalized covalent organic framework named Dpy-NhBt-COF@Tb³⁺, through anchoring Tb³⁺ onto a two-dimensional imine COF (Dpy-NhBt-COF), as the selective and sensitive turn-on fluorescent switch for ochratoxin A (OTA) monitoring. Of particular significance, Tb³⁺ actually plays two roles during sensing process: the specific response signal, and exclusive recognition sites for OTA, while Dpy-NhBt-COF acts as the protector for Tb³⁺. The sensing process involves the replacement of coordinated water molecules from Tb³⁺ by OTA and the energy transfer from OTA to Tb³⁺ centers, resulting in remarkable fluorescence emergence of Tb³⁺. The stabilization of Tb³⁺ via coordination with bipyridine of Dpy-NhBt-COF not only reduces the nonselective binding of naturally occurring ligands, but also avoids the non-radiative quenching caused by solvents molecules. As a sensing platform, Dpy-NhBt-COF@Tb³⁺ possesses noticeable selectivity and high sensitivity toward OTA with an ultralow detection limit of 13.5 nM and rapid response of 10 s. Taken together, our work not only demonstrates great prospect of Tb³⁺-functionalized COF for OTA detection, but also provides a potential way to explore other functionalized materials as promising sensors for other targets.

DNA-templated electrodeposition of silver nanoparticles for direct and label-free aptasensing of ochratoxin A

We present in this work, an aptasensing strategy based on the DNA-templated electrodeposition of silver nanoparticles (AgNPs). The homogeneous electro-deposition of AgNPs on screen printed carbon electrode (SPCE) surface was achieved based on a unique aptamer scaffold. This was constructed by immobilizing a DNA aptamer on SPCE by electrochemical oxidation of its amine groups. The electrodeposition of AgNPs was investigated before and after the addition of the aptamer's specific target; the mycotoxin, ochratoxin A (OTA). Electrochemical characterization by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) showed the effect of the scaffold layer on the electrodeposition of AgNPs. The conformational change induced by aptamer after binding its targeted molecule affects AgNPs electrodeposition and the electron transfer thus allowing OTA detection by cyclic voltammetry. The voltammograms showed a good proportionality between the analyte concentration and the current response. The constructed platform allowed the quantitative aptasensing of OTA within the range of (1.56-400 ng/mL) and the detection limit of 0.6 ng/mL. In term of aptasensor applicability, the proposed strategy showed excellent performance in rice samples.

The Role of Aryldiazonium Chemistry in Designing Electrochemical Aptasensors for the Detection of Food Contaminants

Food safety monitoring assays based on synthetic recognition structures such as aptamers are receiving considerable attention due to their remarkable advantages in terms of their ability to bind to a wide range of target analytes, strong binding affinity, facile manufacturing, and cost-effectiveness. Although aptasensors for food monitoring are still in the development stage, the use of an electrochemical detection route, combined with the wide range of materials available as transducers and the proper immobilization strategy of the aptamer at the transducer surface, can lead to powerful analytical tools. In such a context, employing aryldiazonium salts for the surface derivatization of transducer electrodes serves as a simple, versatile and robust strategy to fine-tune the interface properties and to facilitate the convenient anchoring and stability of the aptamer. By summarizing the most important results disclosed in the last years, this article provides a comprehensive review that emphasizes the contribution of aryldiazonium chemistry in developing electrochemical aptasensors for food safety monitoring.

Spectrofluorimetric study of the complexation of ochratoxin A and Cu2+: Towards the hybrid fluorimetric sensor and visual detection of ochratoxin A in wheat flour samples from farm to fork

In this study, the ochratoxin A (OTA) interaction with some metal cations exhibits a quenching effect of the Cu²⁺, Co²⁺, and Ni²⁺ in the OTA intrinsic fluorescence intensity. The property of the OTA fluorescence change in complexation with the Cu²⁺ has been applied in developing a label-free and selective fluorimetric sensor for fast detection of the OTA trace amounts in wheat flour samples. The achieved color difference map (CDM) based on the spectral profile provides the technical support for the rapid visual sensing of OTA in the wheat flour samples. The feasibility of the hybrid fluorimetric sensor and visual OTA detection in wheat flour samples has been confirmed with the high-performance liquid chromatography (HPLC) method as a standard method. The calculated LOD (0.4 ng g^-1) and LOQ (1.2 ng g^-1) values of the proposed method are much lower than the maximum permissible limit of OTA value reported by the European Union (5 ng g^-1).

A signal-on electrochemical aptasensor based on silanized cellulose nanofibers for rapid point-of-use detection of ochratoxin A

An innovative ultrasensitive electrochemical aptamer-based sensor was developed for ochratoxin A (OTA) detection in cold brew coffee through revolutionary combination of nanofibers, electrochemical method, and aptamer technologies. The assembly of the aptasensor was based on the activation of silanized cellulose nanofibrous membranes as a supporting matrix for methylene blue (MB) redox probe-labeled aptamer tethering. Cellulose nanofibrous membranes were regenerated by deacetylating electrospun cellulose acetate nanofibrous membranes with deacetylation efficacy of 97%, followed by silanization of the nanofiber surfaces by using (3-aminopropyl)triethoxysilane (APTES). A replacement of conventionally casted membranes by the nanofibrous membranes increased the active surface area on the working electrode of a screen-printed three-electrode sensor by more than two times, consequently enhancing the fabricated aptasensor performance. The developed aptasensor demonstrated high sensitivity and specificity toward OTA in a range 0.002-2 ng mL^-1, with a detection limit of 0.81 pg mL^-1. Moreover, the assembled aptamer-based sensor successfully detected OTA in cold brew coffee samples without any pretreatment. The aptasensor exhibited good reusability and stability over long storage time. Graphical abstract.

Boron-doped diamond electrochemical aptasensors for trace aflatoxin B1 detection

An electrochemical aptasensor for detecting trace aflatoxin B₁ (AFB₁) is designed and fabricated consisting of aptamers and gold nanoparticles on conductive boron-doped diamond (BDD) electrode. By examining the relative impedance shift from electrochemical impedance spectroscopy as a function of AFB₁ concentration, the low detection limit (wide linear relationship range) of the aptasensor is realized to be 5.5 × 10^-14 mol L^-1 (1.0 × 10^-13‒1.0 × 10^-8 mol L^-1). The variation in impedance property of the aptasensor is determined by the specific adsorption of AFB₁ molecules to the aptamer at a certain concentration covering the electrode. By means of multiple characteristic processes, it is demonstrated that the constructed aptasensor is favorable for testing the trace AFB₁ with high specificity, sensitivity, stability, repeatability, and reusability, which lead to a possibility to achieve high performance biosensor for practical application to quantitatively detract trace AFB₁ in environments.

Luminescent detection of Ochratoxin A using terbium chelated mesoporous silica nanoparticles

This work represents the time-resolved fluorescence detection of Ochratoxin A (OTA), a highly toxic and commonly found toxin in food stuffs, by a terbium (Tb³⁺) chelated nanoparticle sensor with high sensitivity and remarkable selectivity. The coordination of OTA to Tb³⁺ center on nanoparticle surface resulted in the significant enhancement of the fluorescence signal in nanomolar concentrations with a detection limit of 20 ppb. In contrast, no enhancements were observed in the presence of other common mycotoxins such as Aflatoxin B1, Zearalenone, Citrinin and Patulin. The results indicate that the Tb³⁺ chelated nanoparticle sensor has great potential for applications in food analysis and safety.

A review on recent developments in optical and electrochemical aptamer-based assays for mycotoxins using advanced nanomaterials

This review (with 163 refs) covers the recent developments of nanomaterial-based optical and electrochemical sensors for mycotoxins. The review starts with a brief discussion on occurrence, distribution, toxicity of mycotoxins and the legislations in monitoring their levels. It further outlines the research methods, various recognition matrices and the strategies involved in the development of highly sensitive and selective sensor systems. It also points out the salient features and importance of aptasensors in the detection of mycotoxins along with the different immobilization methods of aptamers. The review meticulously discusses the performance of different optical and electrochemical sensors fabricated using aptamers coupled with nanomaterials (CNT, graphene, metal nanoparticles and metal oxide nanoparticles). The review addresses the limitations in the current developments as well as the future challenges involved in the successful construction of aptasensors with the functionalized nanomaterials. Graphical abstract Recent developments in nanomaterial based aptasensors for mycotoxins are summarized. Specifically, the efficiency of the nanomaterial coupled aptasensors (such as CNT, graphene, metal nanoparticles and metal oxide nanoparticles) in optical and electrochemical methods are discussed.

A synergistic approach to enhance the photoelectrochemical performance of carbon dots for molecular imprinting sensors

Nanoscale carbon dots (CDs) have drawn increasing attention in photoelectrochemical (PEC) sensors for biotoxin detection owing to their many merits including excellent optical, electric and photoelectric properties. In this work, a novel strategy is proposed to improve the photoelectrical response performance of CDs by taking advantage of the synergistic effect of nitrogen and sulfur co-doping and copper phthalocyanine non-covalent functionalization approaches, which rightly adjusts the energy level of CDs, optimization of intimate interfacial contact, extension of the light absorption range, and enhancement of charge-transfer efficiency. This work demonstrates that heteroatom doping and chemical functionalization can endow CDs with various new and improved physicochemical, optical, and structural performances. This synergy contributes enormously to the molecular imprinting photoelectrochemical (MIP-PEC) sensor for toxin detection, and the work typically provided a wide linear range of 0.01 to 1000 ng mL-1 with a detection limit of 0.51 pg mL-1 for ochratoxin A (OTA).

Electrochemical Immuno- and Aptasensors for Mycotoxin Determination

Modern analysis of food and feed is mostly focused on development of fast and reliable portable devices intended for field applications. In this review, electrochemical biosensors based on immunological reactions and aptamers are considered in the determination of mycotoxins as one of most common contaminants able to negatively affect human health. The characteristics of biosensors are considered from the point of view of general principles of bioreceptor implementation and signal transduction providing sub-nanomolar detection limits of mycotoxins. Moreover, the modern trends of bioreceptor selection and modification are discussed as well as future trends of biosensor development for mycotoxin determination are considered.

Electrochemiluminescent aptasensor based on resonance energy transfer system between CdTe quantum dots and cyanine dyes for the sensitive detection of Ochratoxin A

In this work, an innovative aptasensor based on electrochemiluminescence resonance energy transfer (ECL-RET) from CdTe quantum dots (QDs) to a cyanine dye (Cy5) fluorophore for the determination of Ochratoxin A (OTA) was fabricated. A strong cathodic ECL emission was obtained by the CdTe QDs modified glassy carbon electrode (GCE). After the immobilization with the capture DNA (cDNA) and the sequential hybridization with the probe DNA-modified Cy5 (pDNA, the aptamer of OTA), the ECL signal enhanced obviously through the ECL-RET. Meanwhile, the spectrum- and distance-related ECL enhancement effect was investigated. When the target OTA was in the presence, the pDNA-Cy5 molecules were released from the electrode surface owing to the specific interaction between OTA and aptamer, resulting in an evident decrease of ECL signal. Under optimal conditions, the developed aptasensor displayed the linear response toward OTA in the wide range of 0.0005-50 ng/mL with a low detection limit of 0.17 pg/mL. With the excellent selectivity, stability and repeatability, the strategy provided an efficient and universal method for the sensitive detection of target in practical application.

Electrochemical aptamer-based sensors for food and water analysis: A review

Global food and water safety issues have prompted the development of highly sensitive, specific, and fast analytical techniques for food and water analysis. The electrochemical aptamer-based detection platform (E-aptasensor) is one of the more promising detection techniques because of its unique combination of advantages that renders these sensors ideal for detection of a wide range of target analytes. Recent research results have further demonstrated that this technique has potential for real world analysis of food and water contaminants. This review summaries the recently developed E-aptasensors for detection of analytes related to food and water safety, including bacteria, mycotoxins, algal toxins, viruses, drugs, pesticides, and metal ions. Ten different electroanalytical techniques and one opto-electroanalytical technique commonly employed with these sensors are also described. In addition to highlighting several novel sensor designs, this review also describes the strengths, limitations, and current challenges this technology faces, and future development trend.

Advanced fabrication of biosensor on detection of Glypican-1 using S-Acetylmercaptosuccinic anhydride (SAMSA) modification of antibody

Glypican-1 (GPC-1) has been recognized as biomarker of pancreatic cancer. Quantification of GPC-1 level is also pivotal to breast cancer and prostate cancer’s patients. We hereby report the first biosensor for GPC-1 detection. Instead of using crosslinking technique and surface immobilization of antibody, we applied a novel method for biosensor fabrication, using S-Acetylmercaptosuccinic anhydride (SAMSA) to modify the Anti-GPC-1 producing a thiol-linked Anti-GPC-1. The thiol-linked Anti-GPC-1 was then directly formed a single-layer antibody layer on the gold biosensor, minimizing the biosensor preparation steps significantly. Time of Flight Secondary Ions Mass Spectroscopy (TOF-SIMS) characterization verified the thiol-linked antibody layer and demonstrated a unique perspective for surface protein characterization. Differential pulse voltammetry (DPV) was applied to quantify GPC-1 antigen in undiluted human serum with a concentration range of 5,000 pg/µL to 100 pg/µL. The performance of this newly designed biosensor was also compared with modified self-assembled monolayer system fabricated biosensor, demonstrating the high-sensitivity and high-reproducibility of the SAMSA modified antibody based biosensor. This simple fabrication method can also expand to detection of other biomolecules. The simplified operation process shows great potential in clinical application development.

A Label-Free Aptasensor for Ochratoxin a Detection Based on the Structure Switch of Aptamer

A label-free sensing platform is developed based on switching the structure of aptamer for highly sensitive and selective fluorescence detection of ochratoxin A (OTA). OTA induces the structure of aptamer, transforms into G-quadruplex and produces strong fluorescence in the presence of zinc(II)-protoporphyrin IX probe due to the specific bind to G-quadruplex. The simple method exhibits high sensitivity towards OTA with a detection limit of 0.03 nM and excellent selectivity over other mycotoxins. In addition, the successful detection of OTA in real samples represents a promising application in food safety.

Insight into the Molecular Mechanisms of AuNP-Based Aptasensor for Colorimetric Detection: A Molecular Dynamics Approach

Colorimetric aptasensor based on assembly of salt-induced gold nanoparticles (AuNPs) is a promising biosensor. However, the molecular mechanism of the aptasensor is far from being fully understood. Herein, molecular dynamics (MD) simulation was used to investigate molecular interactions in the detection of ochratoxin A (OTA) including the following: (i) the molecular recognition of the anti-OTA aptamer, (ii) OTA-aptamer interactions in monovalent (Na⁺) and divalent (Mg²⁺) electrolytes, (iii) the binding mode of citrate on the AuNP surface, (iv) interactions of the aptamer with citrate-capped AuNPs, and (v) a detailed mechanism of the aptasensor. Our MD simulations revealed a specific binding of the OTA-aptamer complex, compared with OTB and warfarin. Compared with Na⁺, Mg²⁺ ions exerted a more effective attractive force between OTA and anti-OTA aptamer. Three different binding modes of citrate on AuNP surfaces were found. The kinetics of the adsorption of unfolded aptamers onto the citrate-capped AuNP was also elucidated. Most importantly, our MD simulation revealed an insightful analysis of the molecular mechanisms in the AuNP-based aptasensor and paved the way for the design of a novel colorimetric aptasensor for other target molecules, which is not limited to OTA detection.

Affinity Biosensors for Detection of Mycotoxins in Food

This chapter reviews recent achievements in methods of detection of mycotoxins in food. Special focus is on the biosensor technology that utilizes antibodies and nucleic acid aptamers as receptors. Development of biosensors is based on the immobilization of antibodies or aptamers onto various conventional supports like gold layer, but also on nanomaterials such as graphene oxide, carbon nanotubes, and quantum dots that provide an effective platform for achieving high sensitivity of detection using various physical methods, including electrochemical, mass sensitive, and optical. The biosensors developed so far demonstrate high sensitivity typically in subnanomolar limit of detection. Several biosensors have been validated in real samples. The sensitivity of biosensors is similar and, in some cases, even better than traditional analytical methods such as ELISA or chromatography. We believe that future trends will be focused on improving biosensor properties toward practical application in food industry.

Label free aptasensor for ochratoxin A detection using polythiophene-3-carboxylic acid

This work demonstrates the development of electrochemical aptasensor using ochratoxin A (OTA) aptamers. Different aptamer coupling strategies were tested using polythiophene-carboxylic acid (PT3C) and polypyrrole-3-carboxylic acid (PP3C). The best sensitivity was recorded by polythiophene-3-carboxylic acid (PT3C) on screen-printed carbon electrode (SPCE) to attain the direct detection of OTA. The quantification of OTA was achieved by using electrochemical impedance spectroscopy. A good dynamic range 0.125-2.5 ng ml^-1 was obtained for OTA with limit of detection (LOD) 0.125 ng ml^-1 and Limit of quantification (LOQ) 0.3 ng ml^-1 respectively. The good reproducibility was recorded with RSD% of 3.68. The obtained straight line equation was y = 0.4061 × + 1.03, r = 0.99. For real sample applications, the developed aptasensors were demonstrated in coffee samples. The aptasensor displayed good recovery values in the range 88-89%, thus exhibited the effectiveness of proposed aptasensor for such complex matrices.

Homogeneous and label-free electrochemiluminescence aptasensor based on the difference of electrostatic interaction and exonuclease-assisted target recycling amplification

The difference of electrostatic interaction between free Ru(phen)₃²⁺ and Ru(phen)₃²⁺ embedded in double strand DNA (dsDNA) to the negatively charged indium tin oxide (ITO) electrode has been applied to develop a homogeneous and label-free electrochemiluminescence (ECL) aptasensor for the first time. Ochratoxin A (OTA) has been chosen as the model target. The OTA aptamer is first hybridized with its complementary single strand DNA (ssDNA) to form dsDNA and then interacted with Ru(phen)₃²⁺ via the grooves binding mode to form dsDNA-Ru(phen)₃²⁺ complex, which remains negatively charged feature as well as low diffusion capacity to the negatively charged ITO electrode surface owing to the electrostatic repulsion. Meanwhile, the intercalated Ru(phen)₃²⁺ in the grooves of dsDNA works as an ECL signal reporter instead of the labor-intensive labeling steps and can generate much more ECL signal than that from the labeling probe. In the presence of target, the aptamer prefers to form an aptamer-target complex in lieu of dsDNA, which induces the releasing of Ru(phen)₃²⁺ from the dsDNA-Ru(phen)₃²⁺ complex into the solution. With the assistance of RecJ_f exonuclease (a ssDNA specific exonuclease), the released ssDNA and the aptamer in the target-complex were digested into mononucleotides. In the meantime, the target can be also liberated from OTA-aptamer complex and induce target cycling and large amount of free Ru(phen)₃²⁺ present in the solution. Since Ru(phen)₃²⁺ contains positive charges, which can diffuses easily to the ITO electrode surface because of electrostatic attraction, causing an obviously enhanced ECL signal detected. Under the optimal conditions, the enhanced ECL of the system has a linear relationship with the OTA concentration in the range of 0.01-1.0 ng/mL with a detection limit of 2 pg/mL. This innovative system not only expands the immobilization-free sensors in the electrochemiluminescent fields, but also can be developed for the detection of different targets easily with the same strategy by changing the aptamer used.

Ultrasensitive detection of ochratoxin A using aptasensors

Regarding teratogenic, carcinogenic, and immunotoxic nature of ochratoxin A (OTA), selective and sensitive monitoring of this molecule in food samples is of great importance. In recent years, various methods have been introduced for detection of OTA. However, they are usually time-consuming, labor-intensive and expensive. Therefore, these parameters limited their usage. The emerging method of detection, aptasensor, has attracted more attention for OTA detection, due to distinctive advantages including high sensitivity, selectivity and simplicity. In this review, the new developed aptasensors for detection of OTA have been investigated. We also highlighted advantages and disadvantages of different types of OTA aptasensors. This review also takes into consideration the goal to find out which designs are the most rational ones for highly sensitive detection of OTA.

An aptasensor with dsDNA for rapid and highly sensitive detection of kanamycin in milk

Herein, we developed an aptasensor using double-stranded DNA (dsDNA) modified with cadmium sulfide (CdS) nanoparticles and gold nanoparticles (AuNPs) on a gold electrode (GE) for kanamycin detection.

Conformational Changes of Enzymes and Aptamers Immobilized on Electrodes

Conformation constitutes a vital property of biomolecules, especially in the cases of enzymes and aptamers, and is essential in defining their molecular recognition ability. When biomolecules are immobilized on electrode surfaces, it is very important to have a control on all the possible conformational changes that may occur, either upon the recognition of their targets or by undesired alterations. Both enzymes and aptamers immobilized on electrodes are susceptible to conformational changes as a response to the nature of the charge of the surface and of the surrounding environment (pH, temperature, ionic strength, etc.). The main goal of this review is to analyze how the conformational changes of enzymes and aptamers immobilized on electrode surfaces have been treated in reports on biosensors and biofuel cells. This topic was selected due to insufficient information found on the actual conformational changes involved in the function of these bioelectrochemical devices despite its importance.

Biomolecular detection at ssDNA-conjugated nanoparticles by nano-impact electrochemistry

We describe the use of ssDNA functionalized silver nanoparticle (AgNP) probes for quantitative investigation of biorecognition and real time detection of biomolecular targets using nano-impact electrochemistry. The method is based on measurements of the individual collision events between ssDNA aptamer-functionalized AgNPs and a carbon fiber miroelectrode (CFME). Specific binding events of target analyte induced collision frequency changes enabling ultrasensitive detection of the aptamer target in a single step. These changes are assigned to the surface coverage of the NP by the ssDNA aptamers and subsequent conformational changes of the aptamer probe which affect the electron transfer between the NP and the electrode surface. The method enables sensitive and selective detection of ochratoxin A (OTA), chosen here as a model target, with a limit of detection of 0.05nM and a relative standard deviation of 4.9%. The study provides a means of characterizing bioconjugation of AgNPs with aptamers and assessing biomolecular recognition events with high sensitivity and without the use of exogenous reagents or enzyme amplification steps. This methodology can be broadly applicable to other bioconjugated systems, biosensing and related bioanalytical applications.