Photodegradation study of decabromodiphenyl ether by UV spectrophotometry and a hybrid hard- and soft-modelling approach

Monitoring of water sorption and swelling of potato starch-glycerol extruded blend by magnetic resonance imaging and multivariate curve resolution

Magnetic resonance microimaging (MRμI) is an outstanding technique for studying water transfers in millimetric bio-based materials in a non-destructive and non-invasive manner. However, depending on the composition of the material, monitoring and quantification of these transfers can be very complex, and hence reliable image processing and analysis tools are necessary. In this study, a combination of MRμI and multivariate curve resolution-alternating least squares (MCR-ALS) is proposed to monitor the water ingress into a potato starch extruded blend containing 20% glycerol that was shown to have interesting properties for biomedical, textile, and food applications. In this work, the main purpose of MCR is to provide spectral signatures and distribution maps of the components involved in the water uptake process that occurs over time with various kinetics. This approach allowed the description of the system evolution at a global (image) and a local (pixel) level, hence, permitted the resolution of two waterfronts, at two different times into the blend that could not be resolved by any other mathematical processing method usually used in magnetic resonance imaging (MRI). The results were supplemented by scanning electron microscopy (SEM) observations in order to interpret these two waterfronts in a biological and physico-chemical point of view.

Observable carbon isotope fractionation in the photodegradation of polybrominated diphenyl ethers by simulated sunlight

In the present study, carbon isotope effects were investigated during the photodegradation of polybrominated diphenyl ethers (PBDEs) by compound-specific stable isotope analysis (CSIA). Five PBDE congeners (BDE 85, 99, 100, 153 and 154) in n-hexane were individually exposed to simulated sunlight for as long as 15 h, except for BDE 100 (24 h). Consecutive debromination of PBDE by photolysis in n-hexane was confirmed by the clear ¹³C enrichment of mother congeners and successive depletion of δ¹³C values for the photodegradation products with decreasing degree of bromination, which can be attributed to mass-dependent isotope fractionation. The observed variation in the isotope fractionation trends for the para-debrominated products might be linked to the different photocatalytic activities of the PBDE congeners. Higher fractionation was observed for penta-BDEs (ε_c=-2.2 ± 0.45‰ and -2.3 ± 0.26‰ for BDE 85 and BDE 99, respectively) compared to that for hexa-BDEs (ε_c=-1.7 ± 0.41‰, and -1.3 ± 0.12‰ for BDE 153 and BDE 154, respectively). Normal isotope effects (AKIE > 1) observed in our study supports the utility of CSIA for the evaluation of the photodegradation of PBDEs.

Combining In Silico Tools with Multicriteria Analysis for Alternatives Assessment of Hazardous Chemicals: Accounting for the Transformation Products of decaBDE and Its Alternatives

Transformation products ought to be an important consideration in chemical alternatives assessment. In this study, a recently established hazard ranking tool for alternatives assessment based on in silico data and multicriteria decision analysis (MCDA) methods was further developed to include chemical transformation products. Decabromodiphenyl ether (decaBDE) and five proposed alternatives were selected as case chemicals; biotic and abiotic transformation reactions were considered using five in silico tools. A workflow was developed to select transformation products with the highest occurrence potential. The most probable transformation products of the alternative chemicals were often similarly persistent but more mobile in aquatic environments, which implies an increasing exposure potential. When persistence (P), bioaccumulation (B), mobility in the aquatic environment (M), and toxicity (T) are considered (via PBT, PMT, or PBMT composite scoring), all six flame retardants have at least one transformation product that can be considered more hazardous, across diverse MCDA. Even when considering transformation products, the considered alternatives remain less hazardous than decaBDE, though the range of hazard of the five alternatives was reduced. The least hazardous of the considered alternatives were melamine and bis(2-ethylhexyl)-tetrabromophthalate. This developed tool could be integrated within holistic alternatives assessments considering use and life cycle impacts or additionally prioritizing transformation products within (bio)monitoring screening studies.

Photodecomposition properties of brominated flame retardants (BFRs)

This study investigates the geometric and electronic properties of selected BFRs in their ground (S₀) and first singlet excited (S₁) states deploying methods of the density functional theory (DFT) and the time-dependent density functional theory (TDDFT). We estimate the effect of the S₀→ S₁ transition on the elongations of the C-Br bond, identify the frontier molecular orbitals involved in the excitation process and compute partial atomic charges for the most photoreactive bromine atoms. The bromine atom attached to an ortho position in HBB (with regard to C-C bond; 2,2',4,4',6,6'-hexabromobiphenyl), TBBA (with respect to the hydroxyl group; 2,2',6,6'-tetrabromobisphenol A), HBDE and BTBPE (in reference to C-O linkage; 2,2',4,4',6,6'-hexabromodiphenylether and 1,2-bis(2,4,6-tribromophenoxy)ethane, respectively) bears the highest positive atomic charge. This suggests that, these positions undergo reductive debromination reactions to produce lower brominated molecules. Debromination reactions ensue primarily in the aromatic compounds substituted with the highest number of bromine atoms owing to the largest stretching of the C-Br bond in the first excited state. The analysis of the frontier molecular orbitals indicates that, excitations of BFRs proceed via π→π*, or π→σ* or n→σ* electronic transitions. The orbital analysis reveals that, the HOMO-LUMO energy gap (E^H-L) for all investigated bromine-substituted aromatic molecules falls lower (1.85-4.91 eV) than for their non-brominated analogues (3.39-8.07 eV), in both aqueous and gaseous media. The excitation energies correlate with the E^H-L values. The excitation energies and E^H-L values display a linear negative correlation with the number of bromine atoms attached to the molecule. Spectral analysis of the gaseous-phase systems reveals that, the highly brominated aromatics endure lower excitation energies and exhibit red shifts of their absorption bands in comparison to their lower brominated congeners. We attained a satisfactory agreement between the experimentally measured absorption peak (λ_max) and the theoretically predicted oscillator strength (λ_max) for the UV-Vis spectra. This study further confirms that, halogenated aromatics only absorb light in the UV spectral region and that effective photodegradation of these pollutants requires the presence of photocatalysts.

Comprehensive modeling of bloodstain aging by multivariate Raman spectral resolution with kinetics

Blood, as a cardinal biological system, is a challenging target for biochemical characterization because of sample complexity and a lack of analytical approaches. To reveal and evaluate aging process of blood compositions is an unexplored issue in forensic analysis, which is useful to elucidate the details of a crime. Here we demonstrate a spectral deconvolution model of near-infrared Raman spectra of bloodstain to comprehensively describe the aging process based on the chemical mechanism, particularly the kinetics. The bloodstain spectra monitored over several months at different temperatures are decomposed into significant spectral components by multivariate calculation. The kinetic schemes of the spectral components are explored and subsequently incorporated into the developed algorithm for the optimal spectral resolution. Consequently, the index of bloodstain aging is proposed, which can be used under different experimental conditions. This work provides a novel perspective on the chemical mechanisms in bloodstain aging and facilitates forensic applications.

A New Generation of Dihydropyridine Calcium Channel Blockers: Photostabilization of Liquid Formulations Using Nonionic Surfactants

The stability profile of a new 1,4-dihydropyridine derivative (DHP), representative of a series with a hexahydroquinoline ring, was studied to design light-stable liquid formulations. This molecule, named M3, has been shown among the analogs to have a high capacity to block both L- and T-type calcium channels. The ethanol solution of the drug was subjected to a photodegradation test, in accordance with standard rules. The concentrations of the drug and its byproducts were estimated using multivariate curve resolution, applied to the spectral data collected during the test. The improvement of both the photostability and water solubility of M3 was investigated by adding the surfactant polysorbate 20 in a 1:5 ratio to aqueous solutions of the drug. These formulations were exposed to stressing light in containers of bleu polyethylene terephthalate (PET), amber PET, and covered amber PET. The best results were obtained when using the covered amber PET container, reaching a degradation percentage of the drug less than 5% after 12 h under an irradiance power of 450 W/m². The stability of the compound was compared to that of nimodipine (NIM) under the same conditions.

Synthesis and photodegradation studies of analogues of muscle relaxant 1,4-dihydropyridine compounds

This paper describes the synthesis of 1,4-dihydropyridine compounds (DHPs) endowed with good muscle relaxant activity and stability to light. Six new condensed DHPs were synthesized by the microwave irradiation method. A long-chain ester moiety [2-(methacryloyloxy)ethyl] and various substituents on the phenyl ring were demonstrated to affect the muscle relaxant activity occurring in isolated rabbit gastric fundus smooth muscle strips. Forced photodegradation conditions were applied to the molecules according to the ICH rules. The degradation profile of the drugs was monitored by spectrophotometry coupled with the multivariate curve resolution technique. Formation of the oxidized pyridine derivative was observed for all the studied DHPs, except for one compound, which showed very fast degradation and formation of a second photo-product. Pharmacological tests on the molecules showed a good muscle relaxing effect, with a mechanism similar to that of nifedipine, however, proving to be more stable to light.

Isolation and characterization of two novel psychrotrophic decabromodiphenyl ether-degrading bacteria from river sediments

Decabromodiphenyl ether (BDE-209) is a brominated flame retardant and a priority contaminant. Currently, little information is available about its significance in the environment, specifically about its susceptibility to aerobic biotransformation at low temperature. In this work, five phylogenetically diverse BDE-209-degrading bacterial strains were isolated from river sediments of northern China. These strains were distributed among four different genera-Acinetobacter, Pseudomonas, Bacillus and Staphylococcus. All five isolates were capable of growing on BDE-209, among which two isolates show better growth. By detailed morphological, physiological, and biochemical characteristics and 16S rDNA sequence analysis, the two strains were identified and named as Staphylococcus haemolyticus LY1 and Bacillus pumilus LY2. The two bacteria can grow in mineral salt medium containing BDE-209 substrate across the temperatures ranging from 2.5 to 35 °C, with an optimum temperature of 25 °C which could be considered as psychrotrophs accordingly. The degradation experiment showed that more than 70.6 and 85.5 % of 0.5 mg/L BDE-209 were degraded and the highest mineralization efficiencies of 29.8 and 39.2 % were achieved for 0.5 mg/L BDE-209 by S. haemolyticus LY1 and B. pumilus LY2, respectively. To the best of our knowledge, this is the first demonstration for the biodegradation of BDE-209 by two psychrotrophic bacteria isolated from environment.

Photostability and ex-vivo permeation studies on diclofenac in topical niosomal formulations

Photostability studies were performed on topical formulations containing diclofenac (DC). Niosomal gels were designed as photostabilization systems and ascorbic acid was also added to the new topical formulations because of its antioxidant property. Photodegradation tests were applied on commercial formulations containing DC and novel prepared gels, according to the ICH rules. The experiments were monitored by spectrophotometry and the data processed by multivariate curve resolution analysis to estimate the spectra and concentration profiles of evolved components. Characterization of niosomes was evaluated by size and distribution measurement, morphological analysis and encapsulation efficiency. Permeation experiments were performed across rabbit ear skin up to 24 h. Photodegradation rate of DC was found very fast in commercial formulation, with a residual content of 90% after only 4.38 min under a radiant exposure of 450 W/m(2). Photostability resulted increased significantly when the drug was entrapped in niosomal systems. The best results were obtained by reaching a 10% degradation after 50.00 min of light exposure after incorporation of DC in niosomes in presence of 5% ascorbic acid. Moreover, niosomal gel also influenced the permeation capability of DC by enhancing the transdermal delivery of the drug. The cumulative dose permeated of DC from niosomal gel was about three times that obtained with the commercial gel.

The difficulties for a photolabile drug in topical formulations: the case of diclofenac

Topical commercial formulations containing diclofenac (DC) were submitted to photostability tests, according to the international rules, showing a clear degradation of the drug. The degradation process was monitored by applying the multivariate curve resolution technique to the UV spectral data from samples exposed to stressing irradiation. This method was able to estimate the number of components evolved as well as to draw their spectra and concentration profiles. Three photoproducts (PhPs) were resolved by the analysis of photodegradation kinetics, according to two consecutive reactions with a mechanism postulated as DC>PhP₁>PhP₂ and PhP₃. Photodegradation rate of DC in gel was found to be very fast, with a residual content of 90% only after 3.90 min under a radiant exposure of 450 Wm(-2). Because of a very slow skin uptake of DC, a prolonged time of exposure to light could lead to a significant decrease of drug available or the uptake of undesired photoproducts. New gel formulations were designed to increase the photostability of DC by incorporating chemical light-absorbers or entrapping the drug into cyclodextrin. Drug photostability resulted increased significantly in comparison with that of the commercial formulations. The gel containing the light-absorbers such as octisilate, octyl methoxycinnamate and a combination thereof showed a residual DC of 90% up to 12.22 min, 13.75 min and 15.71 min, respectively, under the same irradiation power. The best results were obtained by incorporating the drug in β-cyclodextrin with a degradation of 10% after 25.01 min of light exposure.

Effect of cadmium ion on biodegradation of decabromodiphenyl ether (BDE-209) by Pseudomonas aeruginosa

The influence of Cd(II) ions on the degradation of decabromodiphenyl ether (BDE-209) by an aerobic degrading strain, Pseudomonas aeruginosa, was investigated. The results demonstrated that the strain P. aeruginosa exhibited a high level of resistance against cadmium toxicity, and Cd(II) ions of different concentrations possessed mixed reactions on BDE-209 bioremoval. The degradation efficiency was stimulated at low concentrations of Cd(II) ions (≤ 1 mg L(-1)) but inhibited at higher levels (≥ 5 mg L(-1)). Subsequent analyses revealed that the increase of cell hydrophobicity and membrane permeability were two main factors for Cd(II) ions of low concentrations to accelerate BDE-209 degradation. However, inhibition effect by high concentrations of Cd(II) ions was mainly attributed to the negative impact of metals on growth and metabolism of the strain. It was also showed through cellular distribution of BDE-209 that different concentration of Cd(II) ions affected the amount of BDE-209 inside or outside the cell at different incubation time.

Aerobic biotransformation of decabromodiphenyl ether (PBDE-209) by Pseudomonas aeruginosa

Aerobic biodegradation of decabromodiphenyl ether (PBDE-209) by Pseudomonas aeruginosa under the influence of co-metabolic substrates and heavy metal cadmium ion was studied, The results showed that certain amount of co-metabolic substrates, such as glucose, sucrose, lactose, starch, and beef extract, would promote the biodegradation of PBDE-209, among which glucose most favorably accelerated PBDE-209 degradation by about 36% within 5d. The highest degradation efficiency was reached at the ratio of PBDE-209 and glucose 1:5 while excessive carbon source would actually hamper the degradation efficiency. Exploration of influences of cadmium ion on PBDE-209 biodegradation indicated that degradation efficiency was stimulated at low concentrations of Cd(2+) (0.5-2 mg L(-1)) while inhibited at higher levels (5-10 mg L(-1)), inferring that the heavy metals of different concentrations possessed mixed reactions on PBDE-209 bioremoval. Bromine ion was produced during the biotransformation process and its concentration had a good negative correlation with the residues of PBDE-209. Two nonabromodiphenyl ethers (PBDE-208, PBDE-207), four octabromodiphenyl ethers (PBDE-203, PBDE-202, PBDE-197, PBDE-196) and one heptabromodiphenyl ethers (PBDE-183) were formed with the decomposition of PBDE-209, demonstrating that the main aerobic transformation mechanism of PBDE-209 was debromination.

Adsorption and sequential degradation of polybrominated diphenyl ethers with zerovalent iron

The widely used flame retardants, polybrominated diphenyl ethers (PBDEs), have been regulated owing to their persistence and toxicity. However, the high and increasing accumulation amount of PBDEs in the environment raises a big concern for public safety. In this study, the removal processes of decabromodiphenyl ether (BDE-209) and monobromodiphenyl ether (BDE-3) with microscale zerovalent iron (MZVI) were investigated to get better understandings for the removal mechanism based upon adsorption and degradation. The removal kinetics of both compounds was analyzed and revealed two-step kinetics: a fast removal step at the beginning of the reaction and a follow-up slow removal step. By-products generated during the entire process followed a stepwise sequence. The content of brominated compounds on the surface of MZVI was measured. About 10-20% of BDE-209 and 15-30% of BDE-3 were adsorbed on MZVI. The adsorption of BDE-209 and BDE-3 on MZVI was confirmed through the Fourier transform infrared spectroscopy. Surface adsorption of PBDEs on MZVI dominates the removal mechanism in the beginning and further debromination with MZVI was found. Finally, about 70% of BDE-209 and 60% of BDE-3 was degraded by MZVI within about one month. Our findings provide evidences for understanding the removal mechanism of PBDEs with MZVI and its great longevity on the PBDE degradation, which can facilitate the remediation design.

Hybrid hard- and soft-modeling of spectrophotometric data for monitoring of ciprofloxacin and its main photodegradation products at different pH values

A simple and fast on line spectrophotometric method combined with a hybrid hard-soft modeling multivariate curve resolution (HS-MCR) was proposed for the monitoring of photodegradation reaction of ciprofloxacin under UV radiation. The studied conditions attempt to emulate the effect of sunlight on these antibiotics that could be eventually present in the environment. The continuous flow system made it possible to study the ciprofloxacin degradation at different pH values almost at real time, avoiding errors that could arise from typical batch monitoring of the reaction. On the base of a concentration profiles obtained by previous pure soft-modeling approach, reaction pathways have been proposed for the parent compound and its photoproducts at different pH values. These kinetic models were used as a constraint in the HS-MCR analysis. The kinetic profiles and the corresponding pure response profile (UV-Vis spectra) of ciprofloxacin and its main degradation products were recovered after the application of HS-MCR analysis to the spectra recorded throughout the reaction. The observed behavior showed a good agreement with the photodegradation studies reported in the bibliography. Accordingly, the photodegradation reaction was studied by high performance liquid chromatography coupled with UV-Vis diode array detector (HPLC-DAD). The spectra recorded during the chromatographic analysis present a good correlation with the ones recovered by UV-Vis/HS-MCR method.

Photolytic debromination pathway of polybrominated diphenyl ethers in hexane by sunlight

The objective of this work is to identify the photolytic debromination pathways of polybrominated diphenyl ethers (PBDEs). Thirteen PBDEs (BDEs 209, 208, 207, 206, 196, 183, 154, 153, 100, 99, 85, 47 and 28) in hexane were individually exposed to sunlight for up to 64 h. A total of 180 PBDEs were screened and 74 BDE debromination products were detected. The disappearance rate constant increased exponentially with increasing number of bromines. While no evident difference in debromination preference among ortho, meta and para bromines was found for heavier congeners, the vulnerability rank order was meta ≥ ortho > para for the lighter congeners (≤8 Br). The total molar mass of PBDEs continuously decreased during sunlight exposure, indicating PBDEs were transformed to non-PBDE compounds. A stochastic least squares debromination pathway model was developed to simulate the reactions and determine the yields to extend the results beyond the experimental observations.

Multivariate curve resolution: a review of advanced and tailored applications and challenges

Multivariate curve resolution (MCR) is a widespread methodology for the analysis of process data in many different application fields. This article intends to propose a critical review of the recently published works. Particular attention will be paid to situations requiring advanced and tailored applications of multivariate curve resolution, dealing with improvements in preprocessing methods, multi-set data arrangements, tailored constraints, issues related to non-ideal noise structure and deviation to linearity. These analytical issues are tackling the limits of applicability of MCR methods and, therefore, they can be considered as the most challenging ones.

Atmospheric polybrominated diphenyl ethers (PBDEs) in the United Kingdom

The occurrence of PBDEs has been studied in the atmosphere of four sites in the United Kingdom over a period of ten years. The concentrations have exhibited a sharp decrease after 2001-2003. This is evident in the urban sites of Manchester and London and at the semi-rural site of Hazelrigg. The average ΣPBDE half-lives for these three sites were 3.4, 2.0 and 3.5 years respectively. ΣPBDEs concentrations in the UK (in 2010 ΣPBDEs < 10 pg m(-3)) are among the lowest reported in literature. Comparison of concentrations to estimated emissions and employment of PBDE profiles suggest that PBDEs in the UK atmosphere originate from primary emissions from products that contain mainly the penta-BDE technical mixture. The detection of BDE-183 in the majority of samples hints that octa-bromodiphenylether has also been used extensively in the UK, however to a smaller extent than the penta- product.

Evaluation of mono- to deca-brominated diphenyl ethers in riverine sediment of Korea with special reference to the debromination of DeBDE209

The measured concentrations of polybrominated diphenyl ethers (PBDEs) in inland sediments, from mono- to deca-BDE congeners, ranged from 0.46 to 1760 ng/g dry weight (dw) with mean and median values of 55±230 ng/g dw and 12 ng/g dw, respectively. These concentrations were comparable to or lower than those reported in other countries. The large contributions of the nona- and octa-BDE congeners (14.6±5.0% of total PBDEs) in the present study highlight the necessity of examining these congeners. A high population density and wastewater discharge around the sampling sites are related to the high PBDE concentration. The most predominant congener was DeBDE209 (average proportion, 70.9±12.4%), which is in good agreement with the large amounts of commercial deca-BDE products used in Korea. Statistical analyses also confirmed the ubiquity of DeBDE209 in river sediment from the use of commercial deca-BDE products, such as Saytex-102E and DE-83R. On the other hand, the relatively large contributions of tri- to hepta-BDE congeners compared to the small quantities of commercial penta- and octa-BDE products used in Korea indicate the debromination potential for highly brominated congeners.

Microbial degradation of 4-monobrominated diphenyl ether with anaerobic sludge

Polybrominated diphenyl ethers (PBDEs) are widely used flame retardant additives for many plastic and electronic products. Owing to their ubiquitous distribution in the environment, multiple toxicity to humans, and increasing accumulation in the environment, the fate of PBDEs is of serious concern for public safety. In this study, the degradation of 4-monobrominated diphenyl ether (BDE-3) in anaerobic sludge and the effect of carbon source addition were investigated. BDE-3 can be degraded by two different anaerobic sludge samples. The by-products, diphenyl ether (DE) and bromide ions, were monitored, indicating the reaction of debromination within these anaerobic samples. Co-metabolism with glucose facilitated BDE-3 biodegradation in terms of kinetics and efficiency in the Jhongsing sludge. Through the pattern of amplified 16S rRNA gene fragments in denatured gradient gel electrophoresis (DGGE), the composition of the microbial community was analyzed. Most of the predominant microbes were novel species. The fragments enriched in BDE-3-degrading anaerobic sludge samples are presumably Clostridium sp. This enrichment coincides with the H(2) gas generation and the facilitation of debromination during the degradation process. Findings of this study provide better understanding of the biodegradation of brominated DEs and can facilitate the prediction of the fate of PBDEs in the environment.

Synergistic effect of microscale zerovalent iron particles combined with anaerobic sludges on the degradation of decabromodiphenyl ether

Polybrominated diphenyl ethers (PBDEs) are widely used flame retardants. Owing to their toxicity and increasing accumulation in the environment, the fate of PBDEs in nature is of serious concern. The combined effects of microscale zerovalent iron (MZVI) and anaerobic sludge in decabromodiphenyl ether (BDE-209) degradation were investigated. The co-incubation resulted in 63% and 29% enhancement of removal ability when compared to the single component conditions. By-products generated during the entire process followed a stepwise sequence with non-uniform accumulation rates. Microbes hindered the accessibility of MZVI to BDE-209 and reduced the removal ability in the initial stage (<12 h). According to the analysis of the microbial community change, co-incubation with MZVI leads to the enrichment of heterotrophic microbial populations bearing nitrate- or iron-reducing activities. The interaction between MZVI and microbes contributed to the synergistic effect. Our findings provide evidence for this synergistic effect and offer an alternative for developing better remediation strategies.

Pine needles as passive bio-samplers to determine polybrominated diphenyl ethers

Eight polybrominated diphenyl ethers (PBDEs) were determined in pine needles of three species (Pinus halepensis, Pinus pinea and Pinus nigra) collected in the NE Spain in an attempt to use this matrix for the biomonitoring of airborne PBDEs. The method used was based in ultrasonic extraction followed by alumina and Florisil clean-up and determination by gas chromatography coupled to mass spectrometry in negative chemical ionization. Recoveries were between 99% and 138%, limits of detection between 0.011 and 0.070 ng g(-1)-dw (0.232 ng g(-1)-dw for BDE 209) and repeatability lower than 13%. PBDE levels ranged between 0.027 ng g(-1)-dw and 13.04 ng g(-1)-dw, with predominance of BDE 209, followed by BDEs 47. P. halepensis was the species with the highest PBDE levels and P. nigra, the least, according to their widespread and remote distribution, respectively. The presence of PBDEs in pine needles was attributed to the release of in-use PBDEs, transport through atmosphere and adsorption upon lipid rich pine needles. Given the easy collection of pine needles, its ample distribution and its potential to accumulate airborne contaminants, this matrix is proposed as passive bio-sampler to be used in PBDE monitoring programs.

CAPSULE

Pine needles can be used to biomonitor airborne PBDEs.

Application of mass spectrometry in the analysis of polybrominated diphenyl ethers

This review summarized the applications of mass spectrometric techniques for the analysis of the important flame retardants polybrominated diphenyl ethers (PBDEs) to understand the environmental sources, fate and toxicity of PBDEs that were briefly discussed to give a general idea for the need of analytical methodologies. Specific performance of various mass spectrometers hyphenated with, for example, gas chromatograph, liquid chromatograph, and inductively coupled plasma (GC/MS, LC/MS, and ICP/MS, respectively) for the analysis of PBDEs was compared with an objective to present the information on the evolution of MS techniques for determining PBDEs in environmental and human samples. GC/electron capture negative ionization quadrupole MS (GC/NCI qMS), GC/high resolution MS (GC/HRMS) and GC ion trap MS (GC/ITMS) are most commonly used MS techniques for the determination of PBDEs. New analytical technologies such as fast tandem GC/MS and LC/MS become available to improve analyses of higher PBDEs. The development and application of the tandem MS techniques have helped to understand environmental fate and transformations of PBDEs of which abiotic and biotic degradation of decaBDE is thought to be one major source of Br(1-9)BDEs present in the environment in addition to direct loading from commercial mixtures. MS-based proteomics will offer an insight into the molecular mechanisms of toxicity and potential developmental and neurotoxicity of PBDEs.

Microbial degradation of 4-monobrominated diphenyl ether in an aerobic sludge and the DGGE analysis of diversity

Polybrominated diphenyl ethers (PBDEs) were applied as flame retardant additives in polymers for many plastic and electronic products. Due to their ubiquitous distribution in the environment, potential toxicity to human and tendency for bioaccumulation, PBDEs have raised public safety concern. In this study we examined the degradation of 4-monobrominated diphenyl ether (4-BDE) in aerobic sludge, as a model for PBDE biodegradation. Degradation of 4-BDE was observed in aerobic sludge. Co-metabolism with toluene or diphenyl ether facilitated 4-BDE biodegradation in terms of kinetics and efficiency. Diphenyl ether seems to perform slightly better as an auxiliary carbon source than toluene in facilitating 4-BDE degradation. During the experiment we identified diphenyl ether by gas chromatography/mass spectrometry(GC/MS), which indicates that an anaerobic debromination has occurred. Bacterial community composition was monitored with denaturing gradient gel electrophoresis. The fragments enriched in 4-BDE-degrading aerobic sludge samples belong to presumably a novel anaerobic Clostridiales species distantly related to all known debrominating microbes. This suggests that 4-BDE biodegradation can occur in anaerobic micro-niche in an apparently aerobic environment, by a previously unknown bacterial species. These findings can provide better understandings of biodegradation of brominated diphenyl ethers and can facilitate the prediction of the fate of PBDEs in the environment.

Photolytical transformation rates of individual polybrominated diphenyl ethers in technical octabromo diphenyl ether (DE-79)

Polybrominated diphenyl ethers (PBDEs) are of environmental concern due to their persistence, potential to bioaccumulate, and possible toxic effects, especially for the lower brominated homologues. Reductive debromination under UV light has been identified as the main abiotic pathway for PBDE transformation. Although the kinetics and transformation products have been determined for individual PBDE congeners in different matrices, no effort has been made to determine the kinetics of these congeners when technical mixtures are exposed to UV light. We irradiated technical octabromodiphenyl ether (DE-79) in a perdeuterated solvent to determine the photolytic transformation kinetics of native PBDE congeners. Each deuterium that replaced bromine resulted in a shift to higher masses compared to the native congener, which was measured by gas chromatography with electron ionization mass spectrometry in the selected ion monitoring mode (GC/EI-MS-SIM). Tri-, tetra-, and pentabromodiphenyl ether products (BDE 28, BDE 47, BDE 49, BDE 99, BDE 100) could be proportioned to higher brominated precursors as a function of irradiation time. The kinetics of UV-irradiated single PBDE congeners matched well with results of previous studies of single congeners. However, when the same congeners were irradiated in the technical DE-79 mixture, their half-lives were longer by 20-160%. This study indicates that individually irradiated PBDE congeners behave differently than if present as a mixture. This result should be taken into account in models predicting the environmental fate of PBDEs and most likely also the mixtures of other contaminant groups.

A comprehensive gas chromatography coupled to high resolution mass spectrometry based method for the determination of polybrominated diphenyl ethers and their hydroxylated and methoxylated metabolites in environmental samples

We report here an efficient and comprehensive analytical methodology based on gas chromatography with high resolution mass spectrometry (GC-HRMS) to simultaneously determine PBDEs from mono to deca brominated and hydroxy (OH-) and methoxy (MeO-) PBDE metabolites in environmental samples, particularly, sediment, fish tissue and milk. Among a number of extraction and clean-up methods tested, pressurized liquid extraction followed by gel permeation chromatography and florisil clean-up proved to be simple, robust and optimized so that all target analytes (parent compounds and metabolites) were collected in a single fraction. Extracts were analyzed by GC-HRMS to identify PBDEs. Following, the same extracts were derivatized and re-analyzed by GC-HRMS to determine 11 target and 35 non-target OH- and MeO-PBDEs. Monitoring of the M(+) for MeO-PBDEs and the [M-CH(2)CO](+) ions for derivatized OH-PBDEs at 10,000 resolution permitted unequivocal identification of the PBDE metabolites in the environmental matrices examined. The method was validated in terms of accuracy, precision, detection limits and long-term stability. The analytical precision obtained with this method was between 0.3 and 17%, and the limits of quantification were lower than 3.28 pg/g dry weight, 20.5 and 41.4 pg/g lipid weight in sediment, milk and fish, respectively. The method was applied to determine PBDEs and target and non-target metabolites in all three matrices.