Cytochrome c biosensor for determination of trace levels of cyanide and arsenic compounds

A nucleic acid dye-enhanced electrochemical biosensor for the label-free detection of Hg2+ based on a gold nanoparticle-modified disposable screen-printed electrode

In this paper, a nucleic acid dye-enhanced electrochemical biosensor based on a screen-printed carbon electrode (SPCE) modified with Au nanoparticles (AuNPs) was designed for the detection of Hg²⁺ in water. AuNPs were modified on the surface of the disposable SPCE through the electrodeposition of HAuCl₄. Subsequently, thiolated DNA probes were immobilized on the AuNP-modified electrode surface by Au-S reaction. After Hg²⁺ was bound with a DNA probe by thymine (T)-Hg²⁺-thymine (T) mismatch, the DNA probe was folded into a hairpin structure where positively charged GelRed molecules were embedded into the double-stranded part of the hairpin. Thus, the current of [Fe(CN)₆]^3-/4- increased significantly on account of the decreased electrostatic repulsion at the electrode surface. Under the optimized experimental conditions, the peak current of [Fe(CN)₆]^3-/4- exhibited a good linear relationship with lgC_Hg²⁺ in the concentration of Hg²⁺ linear range of 0.1 nM to 500 nM, and the limit of detection (S/N = 3) was calculated as 0.04 nM. The electrochemical sensor also exhibited excellent selectivity for Hg²⁺ in the presence of nine interfering ions, including Na⁺, Fe³⁺, Ni²⁺, Mg²⁺, Co²⁺, Pb²⁺, K⁺, Al³⁺ and Cu²⁺. Meanwhile, the developed electrochemical sensor was tested in the analysis of Hg²⁺ in tap water and river water samples, and the recoveries ranged from 81.0 to 114%. Therefore, this nucleic acid dye-enhanced electrochemical biosensor provided the advantages of simplicity, sensitivity, and specificity and is expected to be an alternative for Hg²⁺ detection in actual environmental samples.

Electrochemistry as a Powerful Tool for Investigations of Antineoplastic Agents: A Comprehensive Review

Cancer is most frequently treated with antineoplastic agents (ANAs) that are hazardous to patients undergoing chemotherapy and the healthcare workers who handle ANAs in the course of their duties. All aspects related to hazardous oncological drugs illustrate that the monitoring of ANAs is essential to minimize the risks associated with these drugs. Among all analytical techniques used to test ANAs, electrochemistry holds an important position. This review, for the first time, comprehensively describes the progress done in electrochemistry of ANAs by means of a variety of bare or modified (bio)sensors over the last four decades (in the period of 1982-2021). Attention is paid not only to the development of electrochemical sensing protocols of ANAs in various biological, environmental, and pharmaceutical matrices but also to achievements of electrochemical techniques in the examination of the interactions of ANAs with deoxyribonucleic acid (DNA), carcinogenic cells, biomimetic membranes, peptides, and enzymes. Other aspects, including the enantiopurity studies, differentiation between single-stranded and double-stranded DNA without using any label or tag, studies on ANAs degradation, and their pharmacokinetics, by means of electrochemical techniques are also commented. Finally, concluding remarks that underline the existence of a significant niche for the basic electrochemical research that should be filled in the future are presented.

Cell-free arsenic biosensors with applied nanomaterials: critical analysis

Arsenic is a ubiquitously found metalloid in our ecosystem because of natural and anthropogenic activities. People exposed to a higher level of arsenic become susceptible to several disorders, including cancer. According to current statistics, the population chronically exposed to arsenic has surpassed 200 million. Therefore, its detection in our environment is of great importance. There are many analytical techniques for the assessment of arsenic in different kinds of environmental samples. Among these techniques, the biosensor is considered a convenient platform and a widely applied analytical device for rapid qualitative and quantitative analysis in the field of environmental monitoring, food safety, and disease diagnosis. Today, there is a trend of including nanomaterials in sensors and biosensors because it empowers researchers to explore new arsenic detection methods and to enhance their analytical capabilities. In this review article, we summarized the latest developments in arsenic biosensors in particular with emphasis on the works based on cell-free approaches that are protein/enzyme-based, DNA-based, and aptamer-based utilizing various transduction platforms. In the meantime, we compared the capabilities that were related to these cell-free arsenic biosensors. This review article also highlights the development and application of novel nanomaterials for arsenic detection.

Microwave-Assisted Synthesis of Schiff Base Metal–Ligand Complexes with Copper and Nickel Centres for Electrochemical In Vitro Sensing of Nitric Oxide in an Aqueous Solution

Nitric oxide (NO), the smallest signalling molecule known in the human body, keeps blood vessels dilated, controls blood pressure, and has numerous other health regulatory effects. The use of Schiff base complexes incorporated onto electrodes to make electrochemical sensors has been explored as an effective method for the determination and quantification of nitric oxide in aqueous solutions. Schiff base ligands were complexed with Cu and Ni metal centres using the microwave synthesis method to produce metal–ligand complexes with enhanced capabilites for NO detection. The electrical current generated at the anode is directly proportional to NO concentrations in the solution through its oxidation to HNO3. Various characterisation techniques were implemented to verify the integrity of each step of metal–ligand synthesis as well as the final product produced, using FT-IR, UV-VIS, and TGA. The as-synthesised Schiff base complexes were electrodeposited on screen-printed carbon electrodes (SPCE) and electrochemically evaluated in a 0.1 M PBS. Furthermore, metal complexes were screened for their in vitro activity towards NO detection in an aqueous solution (PBS). The results show that the investigated sensors (SPCE/Ni-BPND and SPCE/Cu-BPND) respond positively toward NO detection. It was, therefore, identified that the two sensors also do not differ significantly in terms of precision, sensitivity, and lowest detection limit. The sensor strategies demonstrate the NO limits of detection of 0.22 µM and 0.09 µM, and they also demonstrate sensitivity values of 16.3 µA/µM and 13.1 µA/µM for SPCE/Cu-BPND and SPCE/Ni-BPND sensors, respectively.

Advances in Electrochemical Detection Electrodes for As(III)

Arsenic is extremely abundant in the Earth’s crust and is one of the most common environmental pollutants in nature. In the natural water environment and surface soil, arsenic exists mainly in the form of trivalent arsenite (As(III)) and pentavalent arsenate (As(V)) ions, and its toxicity can be a serious threat to human health. In order to manage the increasingly serious arsenic pollution in the living environment and maintain a healthy and beautiful ecosystem for human beings, it is urgent to conduct research on an efficient sensing method suitable for the detection of As(III) ions. Electrochemical sensing has the advantages of simple instrumentation, high sensitivity, good selectivity, portability, and the ability to be analyzed on site. This paper reviews various electrode systems developed in recent years based on nanomaterials such as noble metals, bimetals, other metals and their compounds, carbon nano, and biomolecules, with a focus on electrodes modified with noble metal and metal compound nanomaterials, and evaluates their performance for the detection of arsenic. They have great potential for achieving the rapid detection of arsenic due to their excellent sensitivity and strong interference immunity. In addition, this paper discusses the relatively rare application of silicon and its compounds as well as novel polymers in achieving arsenic detection, which provides new ideas for investigating novel nanomaterial sensing. We hope that this review will further advance the research progress of high-performance arsenic sensors based on novel nanomaterials.

Meso-tetra(4-sulfonatophenyl)porphyrin silver/Ag nanoparticles/graphene-phase C3N4 with a sandwich-like structure and double-faced active centers via two-step room-temperature photocatalytic synthesis for ractopamine detection

Photochemical synthesis under visible light irradiation is a novel approach in the field of green chemistry, and composites with abundant active centers for electrochemical detection are highly attractive. Herein, a meso-tetra(4-sulfonatophenyl)porphyrin silver/Ag nanoparticles/graphene phase C₃N₄ nanosheets (Ag₂TPPS₄/AgNPs/ng-C₃N₄) material with a sandwich-like structure was synthesized using a two-step photocatalytic reaction at room temperature (25 °C). In the first visible light irradiation step and in the presence of a hole capture agent, Ag⁺ ions were photocatalytically reduced onto the surface of ng-C₃N₄ that was used as a photocatalyst. Then, the protons (H⁺) in the core of H₂TPPS₄ were substituted in situ by photo-oxidized Ag⁺ during the second visible light irradiation step and in the presence of an electron capture agent. The electrochemical response of Ag₂TPPS₄ and ng-C₃N₄ to ractopamine (RAC) results in the unique double-faced active centers of Ag₂TPPS₄/AgNPs/ng-C₃N₄, and the cores (AgNPs) are beneficial as bridges for the connection between Ag₂TPPS₄ and ng-C₃N₄ and for high-efficiency electron transfer. Hence, as-synthesized Ag₂TPPS₄/AgNPs/ng-C₃N₄ exhibits high sensitivity (a low detection limit of 5.1 × 10^-8 M, S/N = 3.0), a wide linear range (1 × 10^-7 to 1.2 × 10^-5 M), and long-term stability. Based on the experimental verification of the electrochemical dynamics and electrostatic attraction at the interface between the dual-active-center surface and RAC, the electrochemical mechanism has been clarified. Specifically, in the multi-cycle oxidation of RAC, the blue shift of specific UV-vis peaks also confirms the electrocatalytic oxidation of the two terminal hydroxyl groups of RAC. In brief, Ag₂TPPS₄/AgNPs/ng-C₃N₄ with a sandwich-like structure and double-faced active centers enhances the detection sensitivity and electrocatalytic efficiency towards RAC.

Interfacing the enzyme multiheme cytochrome c nitrite reductase with pencil lead electrodes: Towards a disposable biosensor for cyanide surveillance in the environment

The present study reports a novel voltammetric biosensor for cyanide based on its inhibitory effect on cytochrome c nitrite reductase (ccNiR). Interestingly, the earlier development of a point-of-care test for nitrite based on the direct electrochemistry of ccNiR has shown that the cyanide inhibition depends on the type of carbon material employed as transducer (Monteiro et al., 2019). In this work, commercial graphite pencil leads were employed in the construction of both working and pseudo-reference electrodes, with ccNiR being simply drop casted onto the former. In this way, we produced a functional and fully integrated voltammetric biosensor for nitrite quantification that also allows to observe a decrease in the catalytic current due to cyanide addition. Under turnover conditions, the biosensor showed a linear response with the logarithm of cyanide concentration in the 5-76 μM (cyclic voltammetry) and 1-40 μM (square-wave voltammetry) ranges, with a sensitivity of 20-25% ln [cyanide μM]^-1 and a detection limit of 0.86-4.4 μM. The application of the pencil lead as a putative pseudo-reference was very promising, since the potentials profile matched those observed with a true reference electrode (Ag/AgCl). Overall, the direct electron transfer between ccNiR and a pencil lead electrode was demonstrated for the first time, with cyanide-induced inhibition being easily monitored, paving the way for the employment of these low-cost bioelectrodes as cyanide probes for on-site surveillance of aquatic environments.

Highly Sensitive As3+ Detection Using Electrodeposited Nanostructured MnOx and Phase Evolution of the Active Material during Sensing

A simple, one-step electrodeposition approach has been used to fabricate MnO_x on an indium-doped tin oxide substrate for highly sensitive As³⁺ detection. We report an experimental limit of detection of 1 ppb through anodic stripping voltammetry with selectivity to As³⁺ in the presence of 10 times higher concentrations of several metal ions. Additionally, we report the simultaneous phase evolution of active material occurring through multiple stripping cycles, wherein MnO/Mn₂O₃ eventually converts to Mn₃O₄ as a result of change in the oxidation states of manganese. This occurs with concomitant changes in morphology. Change in the electronic property (increased charge transfer resistance) of the material due to sensing results in an eventual decrease in sensitivity after multiple stripping cycles. In a nutshell, this paper reports stripping-voltammetry-induced change in morphology and phase of as-prepared Mn-based electrodes during As sensing.

Electroluminescent aptasensor based on RuSiO2 nanoparticles for detection cytochrome c using ferrocene as quenching probe

A stable sandwiched electrochemiluminescence (ECL) aptasensor was originally constructed established upon Ru(bpy)₃²⁺-doped silica nanoparticles (RuSiO₂ NPs) with ferrocene carboxylic acid-aptamer (Fc-aptamer) to quantitatively detect cytochrome c (Cyt C). Herein, RuSiO₂ NPs and Fc-aptamer were respectively prepared through the microemulsion method and amide reaction to fabricate the ECL aptasensor. Furthermore, Fc-aptamer was used as quenching probe for quenching the ECL emission of RuSiO₂ NPs. In detail, RuSiO₂ NPs were primarily immobilized onto the electrodes by the film-forming function of chitosan. Subsequently, the aptamer was incubated onto the decorated GCE via crosslinking with glutaraldehyde (GA). After Cyt C was connected to the GCE via immunoreaction, Fc-aptamer was immobilized onto the modified electrodes owing to the specific recognition between antigens and aptamer. Ultimately, ECL signals markedly descended owing to the poor electricity conductivity of proteins and superior quenching effect of Fc-aptamer. Under optimum conditions, the designed ECL aptasensor indicated an accurate analysis for Cyt C in a rang of 0.001-100 nM with a detection limit of 0.48 pM (S/N = 3).

Electrochemical DNA sensors based on spatially distributed redox mediators: challenges and promises

DNA and aptasensors are widely used for fast and reliable detection of disease biomarkers, pharmaceuticals, toxins, metabolites and other species necessary for biomedical diagnostics. In the overview, the concept of spatially distributed redox mediators is considered with particular emphasis to the signal generation and biospecific layer assembling. The application of non-conductive polymers bearing redox labels, supramolecular carriers with attached DNA aptamers and redox active dyes and E-sensor concept are considered as examples of the approach announced.

A Simple Metallothionein-Based Biosensor for Enhanced Detection of Arsenic and Mercury

Metallothioneins (MTs) are a family of cysteine-rich proteins whose biological roles include the regulation of essential metal ions and protection against the harmful effects of toxic metals. Due to its high affinity for many toxic, soft metals, recombinant human MT isoform 1a was incorporated into an electrochemical-based biosensor for the detection of As³⁺ and Hg²⁺. A simple design was chosen to maximize its potential in environmental monitoring and MT was physically adsorbed onto paper discs placed on screen-printed carbon electrodes (SPCEs). This system was tested with concentrations of arsenic and mercury typical of contaminated water sources ranging from 5 to 1000 ppb. The analytical performance of the MT-adsorbed paper discs on SPCEs demonstrated a greater than three-fold signal enhancement and a lower detection limit compared to blank SPCEs, 13 ppb for As³⁺ and 45 ppb for Hg²⁺. While not being as low as some of the recommended drinking water limits, the sensitivity of the simple MT-biosensor would be potentially useful in monitoring of areas of concern with a known contamination problem. This paper describes the ability of the metal binding protein metallothionein to enhance the effectiveness of a simple, low-cost electrochemical sensor.

Recent advances in cytochrome c biosensing technologies

This review is an attempt, for the first time, to describe advancements in sensing technology for cytochrome c (cyt c) detection, at point-of-care (POC) application. Cyt c, a heme containing metalloprotein is located in the intermembrane space of mitochondria and released into bloodstream during pathological conditions. The release of cyt c from mitochondria is a key initiative step in the activation of cell death pathways. Circulating cyt c levels represents a novel in-vivo marker of mitochondrial injury after resuscitation from heart failure and chemotherapy. Thus, cyt c detection is not only serving as an apoptosis biomarker, but also is of great importance to understand certain diseases at cellular level. Various existing techniques such as enzyme-linked immunosorbent assays (ELISA), Western blot, high performance liquid chromatography (HPLC), spectrophotometry and flow cytometry have been used to estimate cyt c. However, the implementation of these techniques at POC application is limited due to longer analysis time, expensive instruments and expertise needed for operation. To overcome these challenges, significant efforts are being made to develop electrochemical biosensing technologies for fast, accurate, selective, and sensitive detection of cyt c. Presented review describes the cutting edge technologies available in the laboratories to detect cyt c. The recent advancements in designing and development of electrochemical cyt c biosensors for the quantification of cyt c are also discussed. This review also highlights the POC cyt c biosensors developed recently, that would prove of interest to biologist and therapist to get real time informatics needed to evaluate death process, diseases progression, therapeutics and processes related with mitochondrial injury.

Developing Biosensors in Developing Countries: South Africa as a Case Study

A mini-review of the reported biosensor research occurring in South Africa evidences a strong emphasis on electrochemical sensor research, guided by the opportunities this transduction platform holds for low-cost and robust sensing of numerous targets. Many of the reported publications centre on fundamental research into the signal transduction method, using model biorecognition elements, in line with international trends. Other research in this field is spread across several areas including: the application of nanotechnology; the identification and validation of biomarkers; development and testing of biorecognition agents (antibodies and aptamers) and design of electro-catalysts, most notably metallophthalocyanine. Biosensor targets commonly featured were pesticides and metals. Areas  of regional import to sub-Saharan Africa, such as HIV/AIDs and tuberculosis diagnosis, are also apparent in a review of the available literature. Irrespective of the targets, the challenge to the effective deployment of such sensors remains shaped by social and economic realities such that the requirements thereof are for low-cost and universally easy to operate devices for field settings. While it is difficult to disentangle the intertwined roles of national policy, grant funding availability and, certainly, of global trends in shaping areas of emphasis in research, most notable is the strong role that nanotechnology, and to a certain extent biotechnology, plays in research regarding biosensor construction. Stronger emphasis on collaboration between scientists in theoretical modelling, nanomaterials application and or relevant stakeholders in the specific field (e.g., food or health monitoring) and researchers in biosensor design may help evolve focused research efforts towards development and deployment of low-cost biosensors.

DNA adsorption by magnetic iron oxide nanoparticles and its application for arsenate detection

Iron oxide nanoparticles adsorb fluorescently labeled DNA oligonucleotides via the backbone phosphate and quench fluorescence. Arsenate displaces adsorbed DNA to increase fluorescence, allowing detection of arsenate down to 300 nM. This is a new way of using DNA: analyte recognition relies on its phosphate instead of the bases.

Therapeutic and analytical applications of arsenic binding to proteins

Knowledge of arsenic binding to proteins advances the development of bioanalytical techniques and therapeutic drugs.

Biosensors for inorganic and organic arsenicals

Arsenic is a natural environmental contaminant to which humans are routinely exposed and is strongly associated with human health problems, including cancer, cardiovascular and neurological diseases. To date, a number of biosensors for the detection of arsenic involving the coupling of biological engineering and electrochemical techniques has been developed. The properties of whole-cell bacterial or cell-free biosensors are summarized in the present review with emphasis on their sensitivity and selectivity. Their limitations and future challenges are highlighted.

Exploiting differential electrochemical stripping behaviors of Fe3O4 nanocrystals toward heavy metal ions by crystal cutting

This study attempts to understand the intrinsic impact of different morphologies of nanocrystals on their electrochemical stripping behaviors toward heavy metal ions. Two differently shaped Fe3O4 nanocrystals, i.e., (100)-bound cubic and (111)-bound octahedral, have been synthesized for the experiments. Electrochemical results indicate that Fe3O4 nanocrystals with different shapes show different stripping behaviors toward heavy metal ions. Octahedral Fe3O4 nanocrystals show better electrochemical sensing performances toward the investigated heavy metal ions such as Zn(II), Cd(II), Pb(II), Cu(II), and Hg(II), in comparison with cubic ones. Specifically, Pb(II) is found to have the best stripping performance on both the (100) and (111) facets. To clarify these phenomena, adsorption abilities of as-prepared Fe3O4 nanocrystals have been investigated toward heavy metal ions. Most importantly, combined with theoretical calculations, their different electrochemical stripping behaviors in view of facet effects have been further studied and enclosed at the level of molecular/atom. Finally, as a trial to find a disposable platform completely free from noble metals, the potential application of the Fe3O4 nanocrystals for electrochemical detection of As(III) in drinking water is demonstrated.

Advances in arsenic biosensor development--a comprehensive review

Biosensors are analytical devices having high sensitivity, portability, small sample requirement and ease of use for qualitative and quantitative monitoring of various analytes of human importance. Arsenic (As), owing to its widespread presence in nature and high toxicity to living creatures, requires frequent determination in water, soil, agricultural and food samples. The present review is an effort to highlight the various advancements made so far in the development of arsenic biosensors based either on recombinant whole cells or on certain arsenic-binding oligonucleotides or proteins. The role of futuristic approaches like surface plasmon resonance (SPR) and aptamer technology has also been discussed. The biomethods employed and their general mechanisms, advantages and limitations in relevance to arsenic biosensors developed so far are intended to be discussed in this review.

Biosensors in forensic analysis. A review

Forensic analysis is an important branch of modern Analytical Chemistry with many legal and socially relevant implications. Biosensors can play an important role as efficient tools in this field considering their well known advantages of sensitivity, selectivity, easy functioning, affordability and capability of miniaturization and automation. This article reviews the latest advances in the use of biosensors for forensic analysis. The different methodologies for the transduction of the produced biological events are considered and the applications to forensic toxicological analysis, classified by the nature of the target analytes, as well as those related with chemical and biological weapons critically commented. The article provides several Tables where the more relevant analytical characteristics of the selected reported methods are gathered.