Inner filter effect-based fluorescent sensing systems: A review

Preparation of fluorescent polyurethane microspheres and their applications as reusable sensor for 4-nitrophenol detection and as microplastics model for visualizing polyurethane in cells and zebrafish

Fluorescent microspheres are of significant interests due to their wide applications in biotechnology fields. However, their preparation presents several challenges, such as the need for dye labeling, the complexity of materials and often sophisticated preparation conditions. Here a simple process for hydrophilic and crosslinked polyurethane (CPU) microspheres, with carboxyl groups on the surface via one-step precipitation polymerization in 40 min, is presented. The microsphere size is easily adjusted by varying experimental conditions. CPU microspheres exhibit high thermal and pH stability with good redispersibility in water, and emit fluorescence without any modification or dye labeling. The emission mechanism is discussed. CPU microspheres are used as fluorescent probe to detect 4-nitrophenol (4-NP) based on their emission in UV light region, with excellent selectivity and sensitivity. In addition, they are reusable with detection limit unchanged after 7 cycles of reuses, a significant feature of this work. The mechanism of fluorescence detection is thoroughly explored and ascribed to the internal filtration effect. Based on the emission in visible light region, CPU microspheres are used as a model of PU microplastics (MPs) to visualize their biodistribution in HeLa and macrophage cells, as well as in zebrafish larvae, providing a reliable tracer for the visualization and tracking of PU MPs in organisms.

Quality by design-aided acid-free synthesis of self P, N, S-doped black seed-derived carbon quantum dots for application as a nanosensor for eltrombopag environmental and bioanalysis and pharmacokinetic assay

Herein, we developed a rapid, one-step, and cost-effective methodology based on the fabrication of water-soluble self-nitrogen, sulfur, and phosphorus co-doped black seed carbon quantum dots (BSQDs) via microwaveirradiation in six minutes. Our synthesis approach is superior to those in the literature as they involved long-time heating (12 h) with sulfuric acid and sodium hydroxide and/or high temperatures (200 °C). A full factorial design was applied to obtain the most efficient synthesis conditions.BSQDs displayed excitation-independent emissions, demonstrating the purity of the synthesized BSQDs, with a maximum fluorescence at 425 nm after excitation at 310 nm. Eltrombopag olamine is an anti-thrombocytopenia drug that is also reported to cause toxicity in river water based on its Persistence, Bioaccumulation, and Toxicity (PBT). The synthesized BSQDs were employed as the first fluorometric sensor for environmental and bioanalysis of eltrombopag. The fluorescence of BSQDs decreased with increasing concentrations of eltrombopag, with excellent selectivity and sensitivity down to 30 ppb. BSQDs were successfully applied as sensing probes for the detection of eltrombopag in medical tablets, spiked and real human plasma samples, and river water samples, with an overall recovery of at least 97 %. The good tolerance to high levels of foreign components and co-administered drugs indicates good selectivity and versatility of the proposed methodology. Plasma pharmacokinetic parameters such as t1/2, Cmax, and t max of eltrombopag were evaluated to be 9.91 h, 16.0 μg mL-1, and 5 h, respectively. Moreover, the green character of the BSQDs as a sensor was proved by various analytical greenness scales.

A smartphone-assisted sensing hydrogels based on UCNPs@SiO2-phenol red nanoprobes for detecting the pH of aquatic products

For some aquatic products, pH has been considered a useful index to reflect the changes in materials during the loss of freshness. Based on the inner filter effect (IFE) between deprotonated phenol red (PR) and upconversion nanoparticles (UCNPs), UCNPs coated with PR-doped SiO2 shell were embedded in agarose hydrogel to develop a smartphone-assisted method for pH sensing. With the enhancement of pH response using a phase transfer agent (i.e., tetra butyl ammonium hydroxide, TBAH), the proposed senor realized the colorimetric and fluorescence detection of pH in the range of pH 6.6-8 and pH 6-8, respectively. The sensor also showed satisfied reversibility when switched between pH 6 and 8 for at least 5 cycles. Moreover, this sensor displayed great sensitivity, stability, and portability in analyzing actual fish, shrimp, and shellfish samples, providing a new sight for evaluating the freshness of aquatic products.

Label-free direct detection of melamine using functionalized gold nanoparticles-based dual-fluorescence colorimetric nanoswitch sensing platform

Developing a simple, economical, sensitive, and selective method for label-free direct detection analytes is attractive, especially the strategies that could achieve signal amplification without complicated operations. Herein, a dual-fluorescence colorimetric nanoswitch sensing platform for label-free direct melamine (MEL) detection was established. We first explored the relationship between MEL-induced aggregation of gold nanoparticles (AuNPs) and size and determined the optimal size to be 37 nm. Using surfactant Triton X-100 to modify AuNPs and clarify possible interaction mechanisms to improve detection performance. The dynamic changes of surface plasmon resonance absorption peaks in the dispersed and aggregated states of AuNPs were skillfully utilized to match the emission of multicolor gold nanoclusters to trigger the multi-inner filter effect. Accompanied by the addition of MEL-induced AuNPs to change from dispersed to aggregated state, the fluorescence of green-emitting and red-emitting gradually turned on and turned off, respectively. The fluorescence turn-on mode detection limit was 10 times higher than the colorimetric method and as low as 5.5 ng/mL; the detection took only 10 min. The sensor detected MEL in spiked milk samples with a good recovery in the range of 81.2-111.0 % with a coefficient of variation less than 11.4 % and achieved a good correlation with commercial kits. The proposed sensor integrates numerous merits of label-free, multi-signal readout, self-calibration, simple operations, and economical, which provides a promising tool for convenient on-site detection of MEL.

AIEE-active dichlorobenzene and chlorobenzene ratiometric fluorescent probe based on [2.2]paracyclophane

Two AIEE-active [2.2]paracyclophanyl-based diester and monoester (1a and 1b) were facilely synthesized by one-pot method and applied as ratiometric fluorescent probe to detect dichlorobenzene (DCB) and chlorobenzene (CB). Compared with compound 1b, 1a exhibits high sensitivity and low detection limits for DCB and CB in dichloromethane (DCM), particularly, the detection sensitivities for ortho-dichlorobenzene (o-DCB), meta-dichlorobenzene (m-DCB) and chlorobenzene can be modulated by AIEE behavior with lower detection limits of 23.64, 56.27, and 5.92 ppm, respectively in THF/H2O mixed solutions with water fraction (fw) of 70 % due to the formation of aggregation-state. The X-ray structure analysis, theoretical calculations and photophysical properties in different solvents were investigated to reveal the distinctive photophysical behaviors of 1a and 1b. The facile synthesis, X-ray structure, AIEE modulated sensing properties for o-DCB, m-DCB, and CB in DCM and THF/H2O mixed solutions make 1a potential application as fluorescent probe for trace DCB and CB detection in drinking water.

Luminescent carbon dots versus quantum dots and gold nanoclusters as sensors

Ultra-small nanoparticles, including quantum dots, gold nanoclusters (AuNCs) and carbon dots (CDs), have emerged as a promising class of fluorescent material because of their molecular-like properties and widespread applications in sensing and imaging. However, the fluorescence properties of ultra-small gold nanoparticles (i.e., AuNCs) and CDs are more complicated and well distinguished from conventional quantum dots or organic dye molecules. At this frontier, we highlight recent developments in the fundamental understanding of the fluorescence emission mechanism of these ultra-small nanoparticles. Moreover, this review carefully analyses the underlying principles of ultra-small nanoparticle sensors. We expect that this information on ultra-small nanoparticles will fuel research aimed at achieving precise control over their fluorescence properties and the broadening of their applications.

Using eugenol scaffold to explore the explosive sensing properties of Cd(II)-based coordination polymers: experimental studies and real sample analysis

Eugenol, the major constituent of clove oil, has been explored as an essential natural ingredient for ages owing to its versatile pharmacological properties. However, to date, the coordination chemistry of eugenol derivatives has not been much explored. In the present work, an eugenol-based Schiff base ligand (HL) was synthesized and structurally confirmed through ESI-MS, NMR, and FT-IR spectroscopy studies. Consequently, the N,O-donor chelating ligand HL was coordinated with Cd2+, in the presence of bridging pseudohalides (thiocyanate, SCN-, and dicyanamide, N(CN)2-) to synthesize two luminescent coordination polymers (CPs 1 and 2): [Cd2(L)2(X)2]n (where HL = 4-allyl-2-(((2-(benzylamino)ethyl) imino)methyl)-6-methoxyphenol and Xs are bridging pseudohalides, i.e., SCN- and N(CN)2-) on a Cd-eugenol scaffold. The CPs depicted structural diversity, bulk-phase purity, thermal stability, and the presence of interlayer supramolecular C-H⋯π interactions together with C-H⋯S (for CP 1) and C-H⋯N (for CP 2) interactions. The CPs further exemplified themselves as selective and sensitive 'turn-off' probes towards trinitrophenol (TNP) (quenching efficiency: 82.02% and 83.86% for 1 and 2) among a pool of hazardous nitroaromatic compounds (NACs). Accordingly, 1 and 2 exhibited an ultralow limit of detection (LOD) of 0.29 and 0.15 μM, with high quenching constants (KSV) of 5.91 × 104 and 17.60 × 104 M-1, respectively. In addition, TNP sensing events were evidenced to be recyclable and exhibited fast response (∼31 s, 1, and ∼40 s, 2), which increased its real-world viability. Vapor phase TNP sensing was also accomplished upon drop-casted CP films. Experimental investigations and theoretical DFT study confirmed the cooperative occurrence of RET-IFE-PET-collisional quenching and non-covalent π⋯π stacking as key factors involved in the TNP sensing performance. The competency of 1 and 2 in the detection of TNP from several complex environmental matrices (CEMs), viz. matchstick powder, river and sewage water, and soil specimens, was also established with good recovery (∼66-86% and ∼68-93% for 1 and 2, respectively) and high KSV values (3.90-11.39 × 104 and 6.17-18.79 × 104 M-1 for 1 and 2, respectively).

Mixed N,O-donor Directed Blue Emissive Nano-dispersed Mesoporous Mn(II)-MOF: Dual Sensing Probe for Recyclable and Ultrasensitive ppb-Level Recognition of TNP and Cr(VI)-Oxoanions

A new mesoporous Mn(II)-MOF [Mn2(phen)2(nia)2]∞ with 4-c uninodal net topology and reiterating rectangular channels in its cargo-net like extension was synthesized using π-conjugated phenanthroline (phen) and syn-syn bridging 5-nitroisopthalic acid (nia) linkers. The MOF (1) exhibited phase purity, uniform morphology, photo and thermal stability, and robustness; duly triggered by the exceptional framework rigidity via intermolecular H-bonding and interlayer π-π stacking interactions. The bright-blue luminescence of the MOF nano-dispersion was explored for sensitive, specific and ultrafast detection of trinitrophenol (TNP) with extremely low LOD (90.62 nM), high KSV (18.27×104 M-1) and Kq (4×1014 M-1s-1). The vapor-phase TNP sensing was also accomplished. Additionally, 1 served towards discriminatory, aqueous-phase monitoring of Cr(VI)-oxoanions, depicting LODs: 36.08 and 35.70 ppb; KSV: 3.46×104 and 4.87×104 M-1; Kq: 3.26×1013 M-1s-1 and 4.31×1013 M-1s-1; and response time: 32 and 40s for CrO4 2- and Cr2O7 2- respectively. The quenching mechanisms (i. e., RET, PET, IFE, weak interactions, collisional quenching and π⋅⋅⋅π stacking) was explained from several experimental investigations and theoretical DFT calculations. The recyclable sensing events and quantification from complex environmental matrices with admirable recovery rates and high KSV (13.02-22.44×104; ~6.31-10.98×104 and ~6.60-11.42×104 M-1 for TNP, CrO4 2- and Cr2O7 2-) undoubtedly advocated the consistency of the probe.

Recent advances in photoluminescent fluorescent probe technology for food flavor compounds analysis

The real-time, precise qualitative and quantitative sensing of food flavor compounds is crucial for ensuring food safety, quality, and consumer acceptance. As indicators for food flavor labeling, it is vital to delve deep into the specific ingredient and content of food flavor compounds to assess the food flavor quality, but still facing huge challenges. Photoluminescent fluorescent probe technology, with fast detection and high sensitivity, has shown immense potentials in detecting food flavor compounds. In this review, the classification and optical sensing mechanism of photoluminescent fluorescent probe technology are described in detail. Besides, challenges in applying photoluminescent fluorescent probe technology to analyze food flavor compounds are outlined to indicate future research directions. We hope this review can provide an insight for the applications of photoluminescent fluorescent probe technology in the evaluation of food flavor quality in future.

Analytical developments in the synergism of copper particles and cysteine: a review

Cysteine, a sulfur-containing amino acid, is a vital candidate for physiology. Coinage metal particles (both clusters and nanoparticles) are highly interesting for their spectacular plasmonic properties. In this case, copper is the most important candidate for its cost-effectiveness and abundance. However, rapid oxidation destroys the stability of copper particles, warranting the necessity of suitable capping agents and experimental conditions. Cysteine can efficiently carry out such a role. On the contrary, cysteine sensing is a vital step for biomedical science. This review article is based on a comparative account of copper particles with cysteine passivation and copper particles for cysteine sensing. For the deep understanding of readers, we discuss nanoparticles and nanoclusters, properties of cysteine, and importance of capping agents, along with various synthetic protocols and applications (sensing and bioimaging) of cysteine-capped copper particles (cysteine-capped copper nanoparticles and cysteine-capped copper nanoclusters). We also include copper nanoparticles and copper nanoclusters for cysteine sensing. As copper is a plasmonic material, fluorometric and colorimetric methods are mostly used for sensing. Real sample analysis for both copper particles with cysteine and copper particles for cysteine sensing are also incorporated in this review to demonstrate their practical applications. Both cysteine-capped copper particles and copper particles for cysteine sensing are the main essence of this review. The aspect of the synergism of copper and cysteine (unlike other amino acids) is quite promising for future researchers.

Ratiometric fluorescence and smartphone-assisted sensing platform based on dual-emission carbon dots for brilliant blue detection

In this study, an innovative ratiometric fluorescence and smartphone-assisted visual sensing platform based on blue-yellow dual-emission carbon dots (BY-CDs) was constructed for the first time to determine brilliant blue. The BY-CDs was synthesized via a facile one-step hydrothermal process involving propyl gallate and o-phenylenediamine. The synthesized BY-CDs exhibit favorable water solubility and exceptional fluorescence stability. Under excitation at 370 nm, BY-CDs show two distinguishable fluorescence emission bands (458 and 558 nm). Upon addition of brilliant blue, the fluorescence intensity at 558 nm exhibited a significant quenching effect attributed to fluorescence resonance energy transfer (FRET), while the fluorescence intensity at 458 nm was basically unchanged. The prepared BY-CDs can effectively serve as a ratiometric nanosensor for determining brilliant blue with the ratio of fluorescence intensities at 458 and 558 nm (F458/F558) as response signal. In addition, the developed ratiometric fluorescence sensor exhibits a noticeable alteration in color from yellow to green under UV light with a wavelength of 365 nm upon addition of varying concentrations of brilliant blue, which provides the possibility of visual detection of brilliant blue by a smartphone application. Finally, the BY-CDs based dual-mode sensing platform successfully detected brilliant blue in actual food samples and achieved a desirable recovery rate. This study highlights the merits of fast, convenient, economical, real-time, visual, high accuracy, excellent precision, good selectivity and high sensitivity for brilliant blue detection, and paves new paths for the monitoring of brilliant blue in real samples.

Dramatic fluorescence enhancement of PCN-224 and its application in "turn off" immunoassay for sensitive detection of E. coli O157:H7 in milk

In this study, a type of luminescent porous coordination network-224 (PCN-224) in alkaline conditions was synthesized with the dramatic fluorescence enhancement by 20.4 times, which was explained by the fact that the decrease of Zr4+ content in alkaline conditions resulted in the partial recovery of the electron cloud density of 4,4',4'',4'''-(Porphine-5,10,15,20-tetrayl) tetrakis(benzoic acid) (TCPP). Given the large overlap between the excitation spectrum of PCN-224 and the absorption band of Ag nanoparticles (Ag NPs), the coating of the Ag layer on PCN-224 triggered the fluorescence quenching effect, which was applied to "turn off" fluorescence immunoassay for sensitive detection of Escherichia coli O157:H7 (E. coli O157:H7) in milk. The proposed immunoassay reached a low limit of detection (LOD) of 3.3 × 102 CFU mL-1, 29.7 times more sensitive than the conventional ELISA. It will provide a novel alternative strategy for sensitively detecting pathogenic bacteria in the field of food safety.

Molecular design and architectonics towards film-based fluorescent sensing

The past few decades have witnessed encouraging progress in the development of high-performance film-based fluorescent sensors (FFSs) for detecting explosives, illicit drugs, chemical warfare agents (CWAs), and hazardous volatile organic chemicals (VOCs), among others. Several FFSs have transitioned from laboratory research to real-world applications, demonstrating their practical relevance. At the heart of FFS technology lies the sensing films, which play a crucial role in determining the analytes and the resulting signals. The selection of sensing fluorophores and the fabrication strategies employed in film construction are key factors that influence the fluorescence properties, active-layer structures, and overall sensing behaviors of these films. This review examines the progress and innovations in the research field of FFSs over the past two decades, focusing on advancements in fluorophore design and active-layer structural engineering. It underscores popular sensing fluorophore scaffolds and the dynamics of excited state processes. Additionally, it delves into six distinct categories of film fabrication technologies and strategies, providing insights into their advantages and limitations. This review further addresses important considerations such as photostability and substrate effects. Concluding with an overview of the field's challenges and prospects, it sheds light on the potential for further development in this burgeoning area.

Highly Specific Sulfadiazine Detection Using a Two-Dimensional Europium-Organic Coordination Polymer

Sulfadiazine (SFZ) is an inexpensive large-consumption antibiotic used for treat bacterial infections but an excess of residues in food can be harmful. Fast and specific luminescence detection of SFZ is highly challenging because of the interference of structurally similar antibiotics. In this work, we develop a two-dimensional europium-organic coordination polymer with excellent luminescence and water stability for highly specific detection of SFZ in the range of 0-0.2 mM. Structural analysis shows that the high stability of coordination polymer is due to the high coordination number of europium ion and the special chelating coordination structure of ligand. The experiment results revealed that the high selectivity and effectively luminescence quenched behaviour of coordination polymer toward SFZ is caused by highly efficient inner filter effect.

Biosensors for Cancer Biomarkers Based on Mesoporous Silica Nanoparticles

Mesoporous silica nanoparticles (MSNs) exhibit highly beneficial characteristics for devising efficient biosensors for different analytes. Their unique properties, such as capabilities for stable covalent binding to recognition groups (e.g., antibodies or aptamers) and sensing surfaces, open a plethora of opportunities for biosensor construction. In addition, their structured porosity offers capabilities for entrapping signaling molecules (dyes or electroactive species), which could be released efficiently in response to a desired analyte for effective optical or electrochemical detection. This work offers an overview of recent research studies (in the last five years) that contain MSNs in their optical and electrochemical sensing platforms for the detection of cancer biomarkers, classified by cancer type. In addition, this study provides an overview of cancer biomarkers, as well as electrochemical and optical detection methods in general.

Ratio-fluorescence detection of tert-butylhydroquinone based on non-conjugated polymer dots and gold nanoclusters

A novel ratiometric fluorescent probe based on non-conjugated polymer dots (NCPDs) and gold nanocluster (AuNCs) was constructed to determine tert-butylhydroquinone (TBHQ). The probe exhibited dual emission peaks at 480 nm and 630 nm under 370 nm excitation. The fluorescence of AuNCs was quenched by TBHQ due to strong electrostatic interactions, whereas the emission of NCPDs increased. The ratio of fluorescence intensity at 480 nm to 630 nm (F480 / F630) was monitored as analytical signal response. The probe have been utilized for the detection of TBHQ with good linear relationship in the range of 0.2 to 60 μg/mL. The limit of detection (LOD) and the limit of quantitation (LOQ) were 0.048 μg/mL and 0.159 μg/L, respectively. Three levels of spiked-in TBHQ concentrations were obtained with recovery rates from 80 % to 102 %. The present study provided an effective ratiometric fluorescence method for selective screening of TBHQ in food samples.

Gold nanocluster-based ratiometric fluorescence immunoassay for broad-spectrum screening of five eugenols

BACKGROUND

Eugenol compounds (EUGs), which share chemical similarities with eugenol, belong to a group of phenolic compounds primarily found in clove oil. They are highly valued by fish dealers due to their exceptional anesthetic properties, playing a crucial role in reducing disease incidence and mortality during the transportation of live fish. Despite their widespread use, the safety of EUGs remains a contentious topic, raising concerns about the safety of aquatic products. This underscores the need for efficient and sensitive analytical methods for detecting EUGs.

RESULTS

Nanomaterial-based ratiometric fluorescence immunoassay has gained increasing attention due to its integration of the immunoassay's excellent specificity and compatibility for high-throughput analysis, coupled with the exceptional sensitivity and anti-interference capabilities of ratiometric fluorescence assays. In this study, we developed a sensitive ratiometric fluorescence immunoassay for screening five EUGs. This method employs a broad-specificity monoclonal antibody (mAb) as a recognition reagent, selective for five EUGs. It leverages the horseradish peroxidase (HRP)-triggered formation of fluorescent 2,3-diaminophenazine (DAP) and the quenching of fluorescent gold clusters (Au NCs) for detection. The assay's detection limits for eugenol, isoeugenol, eugenol methyl eugenol, methyl isoeugenol, and acetyl isoeugenol in tilapia fish and shrimp were found to be 9.8/19.5 μg/kg, 0.11/0.22 μg/kg, 19/36 Tilapia ng/kg, 8/16 ng/kg, and 3.0/6.1 μg/kg, respectively. Furthermore, when testing spiked Tilapia fish and shrimp samples, recoveries ranging from 84.1 to 111.9 %, with the coefficients of variation staying below 7.1 % was achieved.

SIGNIFICANCE

This work introduces an easy-to-use, broad-specificity, and highly sensitive method for the screening of five EUGs at a pg/mL level, which not only provides a high-throughput strategy for screening eugenol-type fish anesthetics in aquatic products, but also can serve as a benchmark for developing immunoassays for other small molecular pollutants, rendering potent technological support for guarding food safety and human health.

Recent Advances of Bimetallic-Metal Organic Frameworks: Preparation, Properties, and Fluorescence-Based Biochemical Sensing Applications

Bimetallic-metal organic frameworks (BiM-MOFs) or bimetallic organic frameworks represent an innovative and promising class of porous materials, distinguished from traditional monometallic MOFs by their incorporation of two metal ions alongside organic linkers. BiM-MOFs, with their unique crystal structure, physicochemical properties, and composition, demonstrate distinct advantages in the realm of biochemical sensing applications, displaying improvements in optical properties, stability, selectivity, and sensitivity. This comprehensive review explores into recent advancements in leveraging BiM-MOFs for fluorescence-based biochemical sensing, providing insights into their design, synthesis, and practical applications in both chemical and biological sensing. Emphasizing fluorescence emission as a transduction mechanism, the review aims to guide researchers in maximizing the potential of BiM-MOFs across a broader spectrum of investigations. Furthermore, it explores prospective research directions and addresses challenges, offering valuable perspectives on the evolving landscape of fluorescence-based probes rooted in BiM-MOFs.

Developing portable and controllable fluorescence capillary imprinted sensor for visual detection Crohn's disease biomarkers

Simultaneous detection of multiple biomarker levels is essential to improve the accuracy of early diagnosis. Introducing capillary will simplify procedure, less time, and reduce reagent consumption for point-of-care testing of biomarkers. Here, we developed a portable and controllable smartphone-integrated fluorescence capillary imprinted sensing platform for the accuracy visual detection of Crohn's disease biomarkers (lysozyme, Fe3+) using single-excitation/double-signal detection. A novel controllable capillary coating strategy was developed by static gas-driven coating method for synthesis uniform fluorescence capillary imprinted sensor (Si-CD/g-CdTe@MIP capillary sensor). When Fe3+ and lysozyme were added, the fluorescence intensity of Si-CD/g-CdTe@MIP capillary sensor was quenched at 426 nm and enhanced at 546 nm, respectively. This Si-CD/g-CdTe@MIP capillary sensor has high sensitivity and selectivity for quantification lysozyme and Fe3+ simultaneously with the detection limit of 0.098 nM and 0.20 nM, respectively. In addition, the smartphone-integrated Si-CD/g-CdTe@MIP capillary sensor was applied for the intelligent detection of lysozyme and Fe3+, in which the detection limit was calculated as 0.32 nM and 0.65 nM. The smartphone-integrated visual Si-CD/g-CdTe@MIP capillary sensor realized ultrasensitive microanalysis (18 μL/time) of biomarkers in health man and Crohn 's patients, providing a novel strategy for early diagnosis of Crohn 's disease.

A portable Eu-MOF-loaded paper-based probe integrated with smartphone for the visual and on-site detection of Cr2O72- in aqueous media

The high toxicity of dichromate anion (Cr2O72-) its accurate necessitates its sensitive and effective detection to safeguard human health. The study introduces a Eu-MOF fluorescent probe, named as Eu-TDCA, synthesized using 2,5-thiophenedicarboxylic acid (H2TDCA) as a bridging ligand for the detection of Cr2O72- in aqueous media. The probe suspension can detect Cr2O72- through fluorescence quenching, and the detection process exhibits a wide linear range (0-85 and 85-230 mg/L), low limit of detection (LOD, 5.1 μg/L) and rapid response speed (2 min). Furthermore, a portable Eu-TDCA-loaded paper-based probe, integrated with a smartphone color recognition app, was developed for the visual, sensitive and quantitative detection of Cr2O72- in real lake and river water samples, achieving satisfactory recoveries of 99.72%-103.75 %. Additionally, an advanced logic gate device was designed to simplify the detection process, providing a new direction for intelligent on-line detection of analytes.

Harnessing Bioluminescent Bacteria to Develop an Enzymatic-free Enzyme-linked immunosorbent assay for the Detection of Clinically Relevant Biomarkers

Enzyme-linked immunosorbent assay (ELISA) is the gold standard technique for measuring protein biomarkers due to its high sensitivity, specificity, and throughput. Despite its success, continuous advancements in ELISA and immunoassay formats are crucial to meet evolving global challenges and to address new analytical needs in diverse applications. To expand the capabilities and applications of immunoassays, we introduce a novel ELISA-like assay that we call Bioluminescent-bacteria-linked immunosorbent assay (BBLISA). BBLISA is an enzyme-free assay that utilizes the inner filter effect between the bioluminescent bacteriaAllivibrio fischeriand metallic nanoparticles (gold nanoparticles and gold iridium oxide nanoflowers) as molecular absorbers. Functionalizing these nanoparticles with antibodies induces their accumulation in wells upon binding to molecular targets, forming the classical immune-sandwich complex. Thanks to their ability to adsorb the light emitted by the bacteria, the nanoparticles can suppress the bioluminescence signal, allowing the rapid quantification of the target. To demonstrate the bioanalytical properties of the novel immunoassay platform, as a proof of principle, we detected two clinically relevant biomarkers (human immunoglobulin G and SARS-CoV-2 nucleoprotein) in human serum, achieving the same sensitivity and precision as the classic ELISA. We believe that BBLISA can be a promising alternative to the standard ELISA techniques, offering potential advancements in biomarker detection and analysis by combining nanomaterials with a low-cost, portable bioluminescent platform.

Sensitive Dual-Signal ELISA Based on Specific Phage-Displayed Double Peptide Probes with Internal Filtering Effect to Assay Monkeypox Virus Antigen

The global spread of monkeypox has become a worldwide public healthcare issue. Therefore, there is an urgent need for accurate and sensitive detection methods to effectively control its spreading. Herein, we screened by phage display two peptides M4 (sequence: DPCGERICSIAL) and M6 (sequence: SCSSFLCSLKVG) with good affinity and specificity to monkeypox virus (MPXV) B21R protein. To simulate the state of the peptide in the phage and to avoid spatial obstacles of the peptide, GGGSK was added at the C terminus of M4 and named as M4a. Molecular docking shows that peptide M4a and peptide M6 are bound to different epitopes of B21R by hydrogen bonds and salt-bridge interactions, respectively. Then, peptide M4a was selected as the capture probe, phage M6 as the detection probe, and carbonized polymer dots (CPDs) as the fluorescent probe, and a colorimetric and fluorescent double-signal capture peptide/antigen/signal peptide-displayed phage sandwich ELISA triggered by horseradish peroxidase (HRP) through a simple internal filtration effect (IFE) was constructed. HRP catalyzes H2O2 to oxidize 3,3',5,5'-tetramethylbenzidine (TMB) to generate blue oxidized TMB, which can further quench the fluorescence of CPDs through IFE, enabling to detect MPXV B21R in colorimetric and fluorescent modes. The proposed simple immunoassay platform shows good sensitivity and reliability in MPXV B21R detection. The limit of detection for colorimetric and fluorescent modes was 27.8 and 9.14 pg/mL MPXV B21R, respectively. Thus, the established double-peptide sandwich-based dual-signal immunoassay provides guidance for the development of reliable and sensitive antigen detection capable of mutual confirmation, which also has great potential for exploring various analytical strategies for other respiratory virus surveillance.

Inner-filter effect of nitrogen-doped carbon quantum dots-MnO2 nanotubes for smartphone-integrated dual-mode sensing of glutathione and captopril

Nitrogen-doped carbon quantum dots (N-CQDs) exhibit unique fluorescence properties and are considered one of the best candidates for the development of fluorescence-based sensors for the detection of many analytes. In this work, a smartphone-assisted fluorescent sensor has been developed using N-CQDs and MnO2 nanotubes (MnO2 NTs) for the detection of glutathione (GSH) and captopril (CAP). N-CQDs were facilely synthesized via the solvothermal method, where o-phenylenediamine (o-PD) and urea were used as nitrogen precursors. Likewise, MnO2 NTs were synthesized using the hydrothermal method. Relying on the excellent fluorescence quenching ability of MnO2 NTs, a nanocomposite of N-CQDs and MnO2 NTs is prepared, wherein the fluorescence intensity of N-CQDs was effectively quenched in the presence of MnO2 NTs via the inner-filter effect (IFE). The addition of thiolated compounds (GSH and CAP) helped in the recovery of the fluorescence of N-CQDs by triggering the redox reaction and decomposing the MnO2 NTs. An investigation of fluorescence along with smartphone-based studies by evaluating the gray measurement using Image J software showed a great response towards GSH and CAP providing LODs of 4.70 μM and 5.22 μM (fluorometrically) and 5.76 μM and 2.81 μM (smartphone-based), respectively. The practical applicability of the sensing system has been verified using human blood plasma samples.

Development of highly sensitive dual-enhanced fluorescence quenching immunochromatographic test strips based on Pt nanoprobes

The fluorescence-quenching method is crucial in vitro analysis, particularly for immunochromatographic test strips (ICTs) using noble metal nanoparticles as probes. However, ICTs still fall short in meeting the requirements for the detection of traces biomarkers due to the noble metal nanoparticles can only quench fluorescence of the dyes within a confined distance. Interestingly, noble metal nanoparticles, such as Pt NPs cannot only perform fluorescence-quenching ability based on the Förster resonance energy transfer (FRET), but also show perfect oxidase-like catalytic performance on many kinds of substrates, such as 3,3',5,5' -tetramethylbenzidine (TMB). We observed that the oxTMB (the oxidation products of TMB) exhibited notable effectiveness in quenching Cy5 fluorescence by the strong inner filter effect (IFE), which obviously improved the fluorescence-quenching efficiency with extremely low background signal. Through the dual-enhanced fluorescence quenching mechanism, the fluorescence quenching constant (Kn) was 661.24-fold that of only Pt NPs on the NC membrane. To validate the feasibility of this technique, we employed two types of biomarkers, namely microRNA (miR-15a-5p) and the signature protein (PSA). The sensitivity of miR-15a-5p was 9.286 × 10-18 mol/L and 17.5-fold more than that based on Pt NPs. As for the PSA, the LOD (0.6265 pg/mL) was 15.5-fold enhancement more sensitive after catalysis. Overall, the dual-enhanced fluorescence quenching rFICTs could act as a practical detection for biomarker in real samples.

Biomass-derived carbon dots as emerging visual platforms for fluorescent sensing

Biomass-derived carbon dots (CDs) are non-toxic and fluorescently stable, making them suitable for extensive application in fluorescence sensing. The use of cheap and renewable materials not only improves the utilization rate of waste resources, but it is also drawing increasing attention to and interest in the production of biomass-derived CDs. Visual fluorescence detection based on CDs is the focus of current research. This method offers high sensitivity and accuracy and can be used for rapid and accurate determination under complex conditions. This paper describes the biomass precursors of CDs, including plants, animal remains and microorganisms. The factors affecting the use of CDs as fluorescent probes are also discussed, and a brief overview of enhancements made to the preparation process of CDs is provided. In addition, the application prospects and challenges related to biomass-derived CDs are demonstrated.

Asparagus officinalis Herb-Derived Carbon Quantum Dots: Luminescent Probe for Medical Diagnostics

The utilization of natural materials for the synthesis of highly fluorescent carbon quantum dots (CQDs) presents a sustainable approach to overcome the challenges associated with traditional chemical precursors. Here, we report the synthesis of novel S,N-self-doped CQDs (S,N@CQDs) derived from asparagus officinalis herb. These S,N@CQDs exhibit 16.7 % fluorescence quantum yield, demonstrating their potential in medical diagnostics. We demonstrate the efficacy of S,N@CQDs as luminescent probes for the detection of anti-pathogenic medications metronidazole (MTZ) and nitazoxanide (NTZ) over concentration ranges of 0.0-180.0 μM (with a limit of detection (LOD) of 0.064 μM) and 0.25-40.0 μM (LOD of 0.05 μM), respectively. The probes were successfully applied to determine MTZ and NTZ in medicinal samples, real samples, and spiked human plasma, with excellent recovery rates ranging from 99.82 % to 103.03 %. Additionally, S,N@CQDs demonstrate exceptional efficacy as diagnostic luminescent probes for hemoglobin (Hb) detection over a concentration range of 0-900 nM, with a minimal detectability of 9.24 nM, comparable to commercially available medical laboratory diagnostic tests. The eco-friendly synthesis and precise detection limits of S,N@CQDs meet necessary analytical requirements and hold promise for advancing diagnostic capabilities in clinical settings. This research signifies a significant step towards sustainable and efficient fluorescence-based medical diagnostics.

Nanosensor based approaches for quantitative detection of heparin

Heparin, being a widely employed anticoagulant in numerus clinical complications, requires strict quantification and qualitative screening to ensure the safety of patients from potential threat of thrombocytopenia. However, the intricacy of heparin's chemical structures and low abundance hinders the precise monitoring of its level and quality in clinical settings. Conventional laboratory assays have limitations in sensitivity and specificity, necessitating the development of innovative approaches. In this context, nanosensors emerged as a promising solution due to enhanced sensitivity, selectivity, and ability to detect heparin even at low concentrations. This review delves into a range of sensing approaches including colorimetric, fluorometric, surface-enhanced Raman spectroscopy, and electrochemical techniques using different types of nanomaterials, thus providing insights of its principles, capabilities, and limitations. Moreover, integration of smart-phone with nanosensors for point of care diagnostics has also been explored. Additionally, recent advances in nanopore technologies, artificial intelligence (AI) and machine learning (ML) have been discussed offering specificity against contaminants present in heparin to ensure its quality. By consolidating current knowledge and highlighting the potential of nanosensors, this review aims to contribute to the advancement of efficient, reliable, and economical heparin detection methods providing improved patient care.

Advancements in Chemical and Biosensors for Point-of-Care Detection of Acrylamide

Acrylamide (AA), an odorless and colorless organic small-molecule compound found generally in thermally processed foods, possesses potential carcinogenic, neurotoxic, reproductive, and developmental toxicity. Compared with conventional methods for AA detection, bio/chemical sensors have attracted much interest in recent years owing to their reliability, sensitivity, selectivity, convenience, and low cost. This paper provides a comprehensive review of bio/chemical sensors utilized for the detection of AA over the past decade. Specifically, the content is concluded and systematically organized from the perspective of the sensing mechanism, state of selectivity, linear range, detection limits, and robustness. Subsequently, an analysis of the strengths and limitations of diverse analytical technologies ensues, contributing to a thorough discussion about the potential developments in point-of-care (POC) for AA detection in thermally processed foods at the conclusion of this review.

An investigation of the Excitation Wavelength-Dependent Dynamic Changes in the Mechanism of Detection of Picric Acid using Pyrene-Based Donor-Acceptor Systems

Picric acid (PA) is an important industrial feedstock and hence the release of industrial effluents without proper remediation results in its buildup in soil and water bodies. The adverse effects of PA accumulation in living beings necessitate the development of efficient methods for its detection and quantification. Herein, we describe pyrene-based fluorescent sensors for PA, where pyrene is appended with electron-withdrawing groups, malononitrile, and 2-(3-cyano-4,5,5-trimethylfuran-2(5H)-ylidene) malononitrile (DCDHF). These molecules displayed the typical emission of pyrene monomers, as well as a broad red-shifted emission resulting from an intramolecular charge transfer (ICT) in the excited state. Both the emissions displayed a turn-off response to PA with high selectivity and sensitivity and the lowest limit of detection was estimated as 27 nM. To prove the feasibility of on-site detection, test paper strips were prepared, which could detect PA up to 4.58 picograms. Using a combination of experimental and theoretical studies the mechanism of the detection was identified as primary/secondary inner filter effect, oxidative photoinduced electron transfer, or a combination of both depending on the excitation wavelength. Interestingly, the contribution of each of these mechanisms to the total quenching process varied with a change in the excitation wavelength.

Extensive optical and DFT studies on novel AIE active fluorescent sensor for Colorimetric and fluorometric detection of nitrobenzene in Solid, solution and vapor phase

An electron rich isophthalamide based sensor IPA has been synthesized through a simple two-step reaction, containing noteworthy aggregation induced emission (AIE) properties. Considering the significant emission with λmax at 438 nm, sensor IPA has been employed for the sensing of nitrobenzene (NB) in solid, solution and vapor state with high sensitivity and selectivity. Sensor IPA showed noteworthy colorimetric and fluorometric quenching in fluorescence emission when exposed to NB. Small size of NB and involvement of photoinduced electron transfer (PET) lead to detection of NB down to 60 nM. IPA-NB interaction was studied through UV-Vis. spectroscopic studies along with fluorescence spectroscopy. Moreover, 1H and 13C NMR titration experiments provided additional support for determination of interaction type. Furthermore, by using density functional theory (DFT) calculations, thermodynamic stability was studied. Additionally, non-covalent interactions (NCI), frontier molecular orbitals (FMO), density of states (DOS), were investigated for providing further evidence of nitrobenzene sensing and its interaction with sensor. Natural bond orbital (NBO) analysis was carried out for charge transfer studies. Quantum theory of atom in molecule (QTAIM) and SAPT0 studies provided information about interaction points and binding energy. Additionally, IPA was investigated for NB sensing in real water samples, and its effective participation in solid state on-site detection as well as in solution phase was brought to light along with logic gate construction.

Arsenic field test kits based on solid-phase fluorescence filter effect induced by silver nanoparticle formation

Millions of people worldwide are affected by naturally occurring arsenic in groundwater. The development of a low-cost, highly sensitive, portable assay for rapid field detection of arsenic in water is important to identify areas for safe wells and to help prioritize testing. Herein, a novel paper-based fluorescence assay was developed for the on-site analysis of arsenic, which was constructed by the solid-phase fluorescence filter effect (SPFFE) of AsH3-induced the generation of silver nanoparticles (AgNPs) toward carbon dots. The proposed SPFFE-based assay achieves a low arsenic detection limit of 0.36 μg/L due to the efficient reduction of Ag+ by AsH3 and the high molar extinction coefficient of AgNPs. In conjunction with a smartphone and an integrated sample processing and sensing platform, field-sensitive detection of arsenic could be achieved. The accuracy of the portable assay was validated by successfully analyzing surface and groundwater samples, with no significant difference from the results obtained through mass spectrometry. Compared to other methods for arsenic analysis, this developed system offers excellent sensitivity, portability, and low cost. It holds promising potential for on-site analysis of arsenic in groundwater to identify safe well locations and quickly obtain output from the global map of groundwater arsenic.

Highly Efficient Fabrication of Fluorescent "Turn-On" Lateral Flow Strips for Highly Sensitive Detection of Small Molecules Based on Self-Assembly of AuAg Nanoclusters

Currently, fluorescent "turn-on" lateral flow assay (FONLFA) has shown enhanced "naked eye" detection sensitivity for small molecules, while it is urgent to adopt biocompatible fluorescent nanomaterials and needs new strategies to simplify the preparation process. In this study, a highly effective method was proposed to produce FONLFA strips for the detection of small molecules. The gold-silver nanoclusters (AuAgNCs) were immobilized onto the nitrocellulose membrane of the strips by the self-assembly of poly(sodium 4-styrenesulfonate), antigen, and AuAgNCs. The immobilization process entails a straightforward mixing of the three components, taking merely 1 min, thereby bypassing the necessity for chemical modification of fluorescent nanomaterials. The strategy offers a significantly simplified process, which substantially enhances the efficiency of the strip fabrication. Utilizing this method, a FONLFA was developed for carbendazim with a visual limit of detection (vLOD) reduced by 40-fold compared with the conventional colorimetric lateral flow assay (LFA). Furthermore, the approach demonstrates versatility by enabling the immobilization of AuAgNCs and streptavidin, which facilitates the development of aptamer-based FONLFAs. The designed aptamer-based FONLFA for kanamycin exhibited a 50-fold reduction in the vLOD compared with conventional colorimetric LFAs. Therefore, FONLFA holds promising potential for widespread applications in the analysis of small molecules.

D-π-A-π-D-Configured Imidazole-Tethered Benzothiadiazole-Based Sensor for the Ratiometric Discrimination of Picric Acid: Applications in Latent Fingerprint Imaging

A tetraphenyl imidazole-appended benzothiadiazole-based fluorogenic probe (4,7-bis(4-(1,4,5-triphenyl-1H-imidazol-2-yl)phenyl)benzo[c][1,2,5]thiadiazole (BIPT)) has been successfully synthesized and characterized by NMR and high-resolution mass spectrometry (HRMS) spectral analyses. A low limit of detection (LOD) can be achieved to detect picric acid (PA; 7.89 nM). When benzothiadiazole acceptors are incorporated in the D-A-D probe, it can produce a large Stokes shift (206 nm) as a result. Fascinatingly, the fluorescence signals of BIPT were ratiometrically induced by the interaction with PA and exhibited an apparent emission shift from pink to green. The detection process of BIPT is triggered by an intermolecular charge transfer process, as the charge transfer takes place from the electron-rich imidazole to the electron-deficient PA. Moreover, fluorescence detection of PA has been employed in paper strips. Advantageously, sensor BIPT can potentially be applied to contact mode and real-time detection of PA in environmental water samples. Additionally, the BIPT sensor has been successfully employed for latent fingerprint imaging. The study provides clear insights into the rational design of chemosensors for sensing and real-time applications.

Highly efficient dual-mode detection of AFB1 based on the inner filter effect: Donor-acceptor selection and application

BACKGROUND

The utilization of inner filter effect (IFE) brings more opportunities for construction of fluorescence immunoassays but remains a great challenge, especially how to select best donor in the face of extensive fluorescent nanomaterials. Aflatoxin B1 possesses high toxicity among mycotoxins and is frequently found in agricultural products that may significantly threaten to human health. Therefore, with the help of signal transduction mechanism of IFE to develop a convenient and sensitive approach for AFB1 detection is of great significance in ensuring food safety.

RESULTS

Herein, the classical alkaline phosphatase (ALP) catalyzes hydrolysis of p-nitrophenylphosphate to produce p-nitrophenol (PNP) was employed as a model reaction, which intends to explore tunable multicolor fluorescence of gold nanoclusters (AuNCs) for matching PNP to maximize IFE efficiency. The luminescent green-emitting AuNCs were selected as an optimal donor in terms of excellent spectral overlap, high photoluminescence, and adequate system adaptability, thus achieving a 22-fold increase in sensitivity improvement compared to colorimetric method for ALP detection. The fluorescence quenching mechanism between PNP and AuNCs was validated as IFE by studying ultraviolet absorption, zeta potentials and fluorescence lifetime. In light of this, we integrated a highly specific antibody-antigen recognition system, efficient enzymatic reaction and excellent optical characteristics of AuNCs to develop dual-mode immunoassay for AFB1 monitoring. The sensitivity of fluorometric immunoassay was lower to 0.06 ng/mL, which obtained a 3.5-fold improvement compared to "gold standard" ELISA. Their practicability and applicability were confirmed in the tap water, corn, wheat and peanuts samples.

SIGNIFICANCE

This work provides an easy-to-understand screening procedure to select optimal donor-acceptor pairs in IFE analysis. Furthermore, we expect that integration of IFE-based signal conversion strategy into mature immunoassay not only extends the signal types, simplifies signal amplification steps, and reduces the false-positive/false-negative rates, but also provides a simple, convenient, and versatile strategy for monitoring of trace other contaminants.

Development of magnetic fluorescence aptasensor for sensitive detection of saxitoxin based on Fe3O4@Au-Pt nanozymes

In this work, on the basis of Fe3O4@Au-Pt nanozymes (MAP NZs) and aptamer recognition, a magnetic fluorescent aptasensor (MFA) was developed for sensitive and accurate detection of saxitoxin (STX). With the bridge of STX aptamer (AptSTX) and complementary DNA (cDNA), AptSTX decorated MAP NZs (MAP/Apt) and cDNA modified green quantum dots (cDNA@g-QDs) were connected to form MAP/Apt-cDNA@g-QDs complex. As STX behaves a strong binding ability towards AptSTX, it will compete with cDNA and hybridize with Apt to release cDNA@g-QDs. With the addition of TMB, MAP will catalyze TMB to the oxidized TMB (ox-TMB), thereby quenching the fluorescence of g-QDs due to the inner filter effect. Based on this finding, the quantitative relationship between the change in fluorescence of gQDs and STX concentration was explored with a limit of detection (LOD, S/N = 3) of 0.6 nM. An internal standard signal of oxTMB was adopted and reduced the fluctuation of fluorescence signal output. Besides, the fluorescence probe can selectively recognize and detect STX among five marine toxins. Eventually, the MFA method behaved good performance in detecting seafood samples with recoveries of 82.0 % ∼ 102.6 % as well as coefficient of variations (CV) of 7.2 % ∼ 10.3 %. Therefore, the method with internal signal is hopeful to be a potential candidate for sensitive and accurate detection of STX in seafood.

Revealing the high efficiency of fluorescence quenching of rhodamine B by triangular silver nanodisks due to the inner filter effect mechanism

Performing effective fluorescence quenching based on a metal nanomaterial is essential to construct fluorescence sensors. Silver nanomaterials are well known as an excellent candidate for an absorber in fluorescence sensing systems. Herein, we investigated the fluorescence quenching of rhodamine B (RhB) in the presence of triangular silver nanodisks in which perfect overlap between the absorption of the absorber and the fluorescence of the fluorophore was observed. The fluorescence quenching mechanism of RhB was investigated under various excitation wavelengths, together with measurement of the fluorescence lifetime. The quenching efficiency of RhB was proportional to the wavelength excitation. Remarkably, the highest efficiency of fluorescence quenching of RhB was achieved (∼60%). The quenching mechanism was investigated and revealed to be mostly due to the inner filter effect (IFE) mechanism, without the contribution of energy transfer. This result shows a completely different story from most previous studies based on silver nanoparticles, where energy transfer was reported to play a significant role.

Rapid chemical reduction synthesis of copper nanoclusters with blue fluorescence for highly sensitive detection of furazolidone

Tannic acid (TA), as a stabilizing agent, was successfully utilized to establish blue-emitting copper nanoclusters (TA-Cu NCs) on the basis of a facile chemical reduction preparation method. Characterization results proved successful synthesis of TA-Cu NCs with uniform size and excellent stability. TA-Cu NCs exhibited a blue emission wavelength at 431 nm when excited at 364 nm. Interestingly, the as-prepared TA-Cu NCs were selectively quenched by furazolidone based on static quenching. In addition, this analysis platform for furazolidone detection had an excellent linear range from 0.5 to 120 μM with a detection limit of 0.074 μM (S/N = 3). Furthermore, the accuracy of this sensing method was successfully confirmed by detecting furazolidone in bovine serum samples, indicating that TA-Cu NCs had bright application prospects.

Highly fluorescent nitrogen-doped carbon quantum dots prepared using sucrose and urea: Green synthesis, characterization, and use for determination of torsemide in its tablets and plasma samples

A simple and facile microwave-assisted method was developed for the synthesis of highly fluorescent nitrogen-doped carbon quantum dots (N-CQDs) using sucrose and urea. The produced quantum dots exhibited a strong emission band at 376 nm after excitation at 216 nm with quantum yield of 0.57. The as-prepared N-CQDs were characterized using Fourier-transform infrared (FTIR) spectroscopy, transmission electron microscopy (TEM) images, and ultraviolet-visible (UV-visible) spectra. The average particle size was 7.7 nm. It was found that torsemide (TRS) caused an obvious quenching of the fluorescent N-CQDs; so, they were used for its spectrofluorometric estimation. An excellent linear correlation was found between the fluorescence quenching of N-CQDs and the concentration of the drug in the range of 0.10 to 1.0 μg/mL with limit of quantitation (LOQ) of 0.08 μg/mL and limit of detection (LOD) of 0.027 μg/mL. The method was successfully applied for the assay of the drug in its commercial tablets and spiked human plasma samples, and the results obtained were satisfactory. Complex GAPI was used for greenness assessment of the analytical procedures and the pre-analysis steps. Interference likely to be introduced from co-administered drugs was also studied.

Jellyfish-inspired smart tetraphenylethene lipids with unique AIE fluorescence, thermal response, and cell membrane interaction

Smart lipids with fluorescence emission, thermal response, and polyethylene glycolation (PEGylation) functions can be highly valuable for formulation, image-traceable delivery, and targeted release of payloads. Herein, a series of jellyfish-shaped amphiphiles with a tetraphenylethene (TPE) core and four symmetrical amphiphilic side chains were conveniently synthesized and systematically investigated as smart lipids. Compared with regular amphiphilic TPE lipids and phospholipids, the unprecedented jellyfish-shaped molecular geometry was found to enable a series of valuable capabilities, including sensitive and responsive aggregation-induced emission of fluorescence (AIE FL) and real-time FL monitoring of drug uptake. Furthermore, the jellyfish-shaped geometry facilitated the concentration-dependent aggregation from unimolecular micelles at low concentrations to "side-by-side" spherical aggregates at high concentrations and a unique mode of AIE. In addition, the size and the arrangement of the amphiphilic side chains were found to dominate the aggregate stability, cell uptake, and thus the cytotoxicity of the amphiphiles. This study has unprecedentedly developed versatile smart TPE lipids with precise structures, and unique physicochemical and biological properties while the peculiar structure-property relationship may shed new light on the design and application of AIE fluorophores and functional lipids in biomedicine and materials science.

A dual-emitting fluoroprobe fabricated by aloe leaf-based N-doped carbon quantum dots and copper nanoclusters for nitenpyram detection in waters by virtue of inner filter effect and static quenching principles

Fluorescence sensing technique has been used in environmental analysis due to its simplicity, low cost, and visualization. Although the fruit pulp-based biomass carbon quantum dots (CQDs) have excellent luminescent properties, aloe leaves possess the superiority of being easily accessible in all seasons compared to fruit pulp. Thus, we fabricated Aloe carazo leaf-based nitrogen doping-CQDs (N-CQDs) using a facile hydrothermal approach, which emitted bright blue fluorescence with a quantum yield of 21.4 %. By comparison, the glutathione-encapsulated copper nanoclusters (GSH-CuNCs) displayed strong red fluorescence. A blue/red dual emission based on the N-CQDs/CuNCs mixture was established for nitenpyram detection. At the 350-nm excitation, the N-CQD/CuNCs system produced dual-wavelength emitting peaks at 440 and 660 nm, respectively. Moreover, when nitenpyram was introduced into the system, the fluorescence intensities (FIs) of N-CQDs significantly decreased, whereas the FIs of GSH-CuNCs varied slightly; simultaneously, the solution color changed from bright blue to dark red. Both the spectral overlapping between nitenpyram's UV-Vis absorption and N-CQDs' excitation and almost unchanged fluorescence lifetimes indicated the occurrence of inner-filtering effect (IFE) in the dual-emitting fluoroprobe. In addition, the Stern-Volmer constant (Ksv = 6.92 × 103 M-1), temperature effect, as well as UV-Vis absorption of N-CQD/CuNCs before and after the addition of nitenpyram corroborated the static-quenching behavior. Consequently, the fluorescence-quenching of N-CQDs by nitenpyram was attributable to the joint IFE and static-quenching principles. A good linearity existed between the F660/F440 values and nitenpyram concentrations (0.5-200 μM) with a method detection limit of 0.15 μM. The dual-emitting fluoroprobe provided the satisfactory recoveries (95.0%-107.0 %) for nitenpyram detection in real-world waters, which were comparable with the results of traditional liquid chromatography coupled to tandem mass spectrometry method. Owing to its simple operations, low-cost, and adaptability for on-site outdoor monitoring, the newly developed dual-emitting fluoroprobe possesses great potential applications in routine monitoring of nitenpyram under field conditions.

A comprehensive exploration of tartrazine detection in food products: Leveraging fluorescence nanomaterials and electrochemical sensors: Recent progress and future trends

Azo dyes are widely used as food coloring agents because of their affordability and stability. Examples include brilliant blue, carmoisine, sunset yellow, allura red, and tartrazine (Tar), etc. Notably, Tar is often utilized in hazardous food goods. They are frequently flavoured and combined with food items, raising the likelihood and danger of exposure. Therefore, detecting Tar in food is crucial to prevent health risks. Fluorescence nanomaterials and electrochemical sensors, known for their high sensitivity, affordability, simplicity, and speed, have been widely adopted by researchers for Tar detection. This comprehensive paper delves into the detection of Tar in food products. It extensively covers the utilization of advanced carbon-based nanomaterials, including CDs, doped CDs, and functionalized CDs, for sensitive Tar detection. Additionally, the paper explores the application of electrochemical sensors. The paper concludes by addressing current challenges and prospects, emphasizing efforts to enhance sensitivity, and selectivity for improved food safety.

A PEDOT enhanced covalent organic framework (COF) fluorescent probe for in vivo detection and imaging of Fe3

Simple and accurate in vivo monitoring of Fe3+ is essential for gaining a better understanding of its role in physiological and pathological processes. A novel fluorescent probe was synthesized via in situ solid-state polymerization of 3,4-ethylenedioxythiophene (PEDOT) in the pore channels of a covalent organic framework (COF). The PEDOT@COF fluorescent probe exhibited an absolute quantum yield (QY) 3 times higher than COF. In the presence of Fe3+ the PEDOT@COF 475 nm fluorescence emission, 365 nm excitation, is quenched within 180 s. Fluorescence quenching is linear with Fe3+ in the concentration range of 0-960 μM, with a detection limit of 0.82 μM. The fluorescence quenching mechanism was attributed to inner filter effect (IEF), photoinduced electron transfer (PET) and static quenching (SQE) between PEDOT@COF and Fe3+. A paper strip-based detector was designed to facilitate practical applicability, and the PEDOT@COF probe successfully applied to fluorescence imaging of Fe3+ levels in vivo. This work details a tool of great promise for enabling detailed investigations into the role of Fe3+ in physiological and pathological diseases.

A single recognition unit-based virtual sensor Array: Applying 3D fluorescence spectroscopy to inner filter effect-based sensing

A convenient, fast, low-cost detection and discrimination method is demanded for environmental monitoring but still it remains more technological challenges. Herein, we demonstrate that the inner filter effect (IFE), in combination with three-dimensional fluorescence spectroscopy, can offer a virtual sensor array (VSA) as apropersolution. And with the aid of pattern recognition techniques, it is feasible to recognize compounds with structural similarities economically and effectively. In this study, with the help of visual clustering plots of principal component analysis (PCA), a prediction model based on hierarchical strategy was made using support vector machine (SVM) method for the qualitative profiling of aromatic pollutants. The VSA was constructed by a single metal-organic framework (MOF) recognition unit (MOF-74 (Zn)) with the excitation wavelength as external regulatory factors. Pattern characteristics of four aromatics with very similar structures (phenylamine, chlorobenzene, nitrobenzene, and phenol), both single analyte and binary mixtures, were acquired. The primary constituents of multi-dimensional spectral signals were subsequently extracted and fed into a vector machine to construct a prediction model through 10-fold cross-validation optimization, resulting in a classification accuracy of 100% for single analytes and 96% for mixtures. Quantitative research has shown that, except for chlorobenzene, all three other analytes can be predicted in concentration within an acceptable error range, and the mixture can be predicted proportionally. Moreover, the VSA can be used to distinguish these pollutants in tap and river water also. We propose for the first time a new tack for the construction of VSA in a general manner, namely using three-dimensional full range fluorescence scanning for IFE based sensing to get multiple times of information resulting from different weak interaction between analyte and sensor for decision-making.

Ratiometric fluorescent sensing of melatonin based on inner filter effect and smartphone established detection

Melatonin (MLT) is a crucial neurohormone having inhibitory effects over various types of cancer. In this work, 3,6-Diaminocarbazole (DAC), a fluorescent probe is utilized to detect MLT in a highly sensitive, selective and facile way. The unique feature of present work is that MLT is sensed by ratiometric fluorescent technique based on the inner filter effect (IFE) using DAC at an emission wavelength of 310 nm. As a result, a noticeable change in color from red to cyan is observed and the quantitative analysis of fluorescence signals at these wavelengths are used to detect MLT observing a linear relationship between the ratio of emission intensities and the concentration of MLT over a linear range of 0 to 78 μM. DAC can accurately measure the detailed quantity of MLT with a limit of detection of 30 nM and has proved to be an efficient sensing probe due to its excellent molar absorptivity and high photoluminescence quantum yield (PLQY). Sensing characterization was carried out UV-Vis, steady-state, and time- resolved fluorescence spectroscopic techniques. The smartphone app "RGB colour detector" value has been successfully linked with the considerable detectable color changes of DAC on addition of MLT. HOMO-LUMO have been calculated using DFT with B3LYP/6-31G(d,p) level and band gaps of 3.77 eV and 4.91 eV were found for DAC and MLT, respectively. Electrons are not allowed energetically to transfer from MLT to DAC, as is evident from their band gaps. Therefore, IFE can be considered the foremost method in fluorescence quenching of present investigation. The developed sensor was verified by spiking of MLT in human serum.

Carbon dots and MnO2 nanosheet nanocomposites sensing platform for sensitive detection of oxalate in urine samples of urolithiasis patients

In the human body, oxalate tends to form calcium oxalate with calcium ions, which can trigger the formation of stones in the urinary system. Therefore, oxalate in urine is usually utilized as a crucial biomarker in clinical urolithiasis diagnoses. In this work, a turn-on fluorescent nanoprobe was developed based on nitrogen-doped carbon dots (N-CDs) and MnO2 nanosheets (NSs) nanocomposites for oxalate sensing in urolithiasis patients. MnO2 NSs is a good sensing platform with high extinction coefficients and rich redox chemistry. The fluorescent N-CDs can be quenched efficiently by MnO2 NSs through the inner filter effect (IFE) to form N-CDs-MnO2 nanocomposites. The reductive oxalate could operate the decomposition of MnO2 NSs to Mn2+ resulting in the dissociation of the N-CDs-MnO2 nanocomposites and fluorescence recovery of N-CDs. Under optimal conditions, the developed sensor revealed good specificity toward oxalate with a limit of detection (LOD) of 0.69 μM. The developed sensor was successfully applied to quantify oxalate content in 47 urine samples (41 urolithiasis patients and 6 healthy persons). The results showed great consistency with clinical diagnostic reports and computed tomography images. This novel method retains several unique advantages, including affordable, rapid, and validating potential clinical application.

Exploring fluorescence of metal nanoparticles for effective utility in drug sensing: A Promising ''on-off'' fluorescence probe for analysis of cephalosporins is fabricated

A promising fluorescent nano sensor was fabricated exploiting the unique optical and physicochemical properties of silver nanoparticles (AgNPs). AgNPs were prepared following a chemical reduction technique to get a highly water-soluble nano sensor, stable for at least 1 month without the need of organic stabilizers. Full characterization of AgNPs was done using different spectroscopic and microscopic techniques. They exhibit excellent water solubility, physicochemical and optical properties, enabling them to be successfully applied in chemical sensing of drugs. The prepared AgNPs could be conceived as a fluorescent probe for the fluorimetric determination of two commonly administered cephalosporins ceftriaxone (CTX) and cefepime (CFP) based on the quenching behavior of the fluorescence omitting the need for pre-derivatization or chromogenic reagents. The fluorescence intensity of AgNPs at 485 nm after excitation at 242 nm was quantitively quenched upon increasingly adding the studied drugs over the concentration ranges of 1-10 µg/mL and 0.9-9 µg/mL with detection limits of 0.178 µg/mL and 0.145 µg/mL for CTX and CFP, respectively. The quenching mechanisms were investigated and illustrated. The influence of different experimental parameters was studied and optimized. The suggested sensor provides an innovative, sensitive, and eco-friendly approach for the assay of the drugs in their pharmaceutical vials and quality control laboratories with excellent % recoveries of 99.88 ± 1.15, 99.95 ± 1.15 for CTX and CFP, respectively. The method was validated in accordance with ICH Q2 R1 recommendations. The greenness evaluation was performed through both Eco-Scale and GAPI revealing the green criteria of the developed method.

Receptor-free phenothiazine derivative as fluorescent probe for picric acid: Investigation of the inner filter effect channel

In this study, a highly fluorescent and receptor-free phenothiazine derivative (PDAB) was developed to detect picric acid. A combination of steady-state and time-resolved fluorescence studies was conducted to examine the excited state behavior of PDAB with picric acid in solution. The PDAB probe displayed a significant degree of selectivity and was highly sensitive to picric acid, with an extremely low detection limit of 9.82 nM. Time-resolved fluorescence quenching studies exhibit direct evidence of an inner filter effect-based sensing mechanism. Using the Parker equation, a thorough analysis was done to correct the inner filter effect on the sensing of picric acid. Overall, these studies provide critical information on the sensing mechanism for picric acid detection.

Conformer aggregates exhibit dual wavelength emissions on chiral binaphthyl-based triphenylethylenes and acetone detection

The study on structure-property relationship has been a significant focus in the field of organic molecular luminescence. In the present work, three chiral binaphthyl-based triphenylethylene (HTPE) derivatives were prepared through condensation reactions. Despite their similar structures, these compounds exhibited distinct luminescent properties. Diphenylmethane-derived HTPE displayed dual-state emissions, characterized by dual-wavelength emissions which were insensitive to the polarity of solvents. The dual emissions in solution state could be attributed to the different locally excited (LE) excitons. However, upon aggregation, two stable conformers were generated, probably leading to different emission peaks. In contrast, dibenzocycloheptadiene-derived HTPE aggregates showed only a single emission peak. Surprisingly, fluorene-derived HTPE exhibited obvious luminescence in neither solution nor aggregate states due to inherent π-π interactions. These conclusions were substantiated by X-ray analysis, spectroscopic analysis, and theory calculations. Application studies demonstrated that fluorescence on/off switches could be achieved through exposure to acetone. More importantly, trace amounts of acetone could be detected using luminescent materials in both organic and aqueous phases with a detection limit of 0.08 %. Thus, this work not only presents a strategy for designing chiral triphenylethylene fluorophores but also provides valuable information for dual wavelength emissions resulting from two stable conformations.

Sensitive determination of naftazone using carbon quantum dots nanoprobe by fluorimetry and smartphone-based techniques

A simple, fast, and direct mix-and-read spectrofluorimetric method has been developed for the sensitive determination of naftazone (NFZ) utilizing graphene quantum dots (GQDs) as a greener and highly luminescent nanosensor. NFZ effectively quenches the strong fluorescence of GQDs at λex/λem of 350/440 nm via the inner filter effect mechanism. The nanosensor exhibits excellent linearity for NFZ over the concentration range of 0.46 to 186 μM with a limit of detection of 0.04 μM. The proposed method was validated for the successful determination of NFZ in tablets and on manufacturing equipment surfaces with good % recoveries of 98.4-101.6 and 96.3 - 102.2%, respectively. Furthermore, an integrated smartphone-based reader has been implemented and successfully applied for the determination of NFZ. The smartphone-based reader consists of a 365 nm UV torch as an excitation source, a smartphone for recording images, and smartphone-powered image analysis software for signal interpretation, together with a paper-based analytical device (PAD) utilizing filter paper as a substrate and correction fluid as a barrier for creation of detection zones. This smart platform showed excellent sensitivity with a limit of detection down to 0.12 nmol/zone, and it could be used for in-site determination of NFZ, especially for the limited resources laboratories.

Exploring Various Photochemical Processes in Optical Sensing of Pesticides by Luminescent Nanomaterials: A Concise Discussion on Challenges and Recent Advancements

Food safety is a burning global issue in this present era. The prevalence of harmful food additives and contaminants in everyday food is a significant cause for concern as they can adversely affect human health. More particularly, among the different food contaminants, the use of excessive pesticides in agricultural products is severely hazardous. So, the optical detection of residual pesticides is an effective strategy to counter the hazardous effect and ensure food safety. In this perspective, nanomaterials have played a leading role in defending the open threat against food safety instigated by the reckless use of pesticides. Now, nanomaterial-based optical detection of pesticides has reached full pace and needs an inclusive discussion. This Review covers the advancement of photoprocess-based optical detection of pesticides categorically using nanomaterials. Here, we have thoroughly dissected the photoprocesses (aggregation and aggregation-induced emission (AIE), charge transfer and intramolecular charge transfer (ICT), electron transfer and photoinduced electron transfer (PET), fluorescence resonance energy transfer (FRET), hydrogen bonding, and inner filter effect) and categorically demarcated their significant role in the optical detection of pesticides by luminescent nanomaterials over the last few years.