Nanogapped Au(core) @ Au-Ag(shell) structures coupled with Fe3O4 magnetic nanoparticles for the detection of Ochratoxin A

SERS aptasensor for simultaneous detection of ochratoxin A and zearalenone utilizing a rigid enhanced substrate (ITO/AuNPs/GO) combined with Au@AgNPs

The contamination of mycotoxins poses a serious threat to global food security, hence the urgent need for simultaneous detection of multiple mycotoxins. Herein, two SERS nanoprobes were synthesized by embedded SERS tags (4-mercaptopyridine, 4MPy; 4-mercaptobenzonitrile, TBN) into the Au and Ag core-shell structure, and each was coupled with the aptamers specific to ochratoxin A (OTA) and zearalenone (ZEN). Meanwhile, a rigid enhanced substrate Indium tin oxide glass/AuNPs/Graphene oxide (ITO/AuNPs/GO) was combined with aptamer functionalized Au@AgNPs via π-π stacking interactions between the aptamer and GO to construct a surface-enhanced Raman spectroscopy (SERS) aptasensor, thereby inducing a SERS enhancement effect for the effective and swift simultaneous detection of both OTA and ZEN. The presence of OTA and ZEN caused signal probes dissociation, resulting in an inverse correlation between Raman signal intensity (1005 cm-1 and 2227 cm-1) and the concentrations of OTA and ZEN, respectively. The SERS aptasensor exhibited wide linear detection ranges of 0.001-20 ng/mL for OTA and 0.1-100 ng/mL for ZEN, with low detection limits (LOD) of 0.94 pg/mL for OTA and 59 pg/mL for ZEN. Furthermore, the developed SERS aptasensor demonstrated feasible applicability in the detection of OTA and ZEN in maize, showcasing its substantial potential for practical implementation.

Advances in Aptamer-Based Conjugate Recognition Techniques for the Detection of Small Molecules in Food

Small molecules are significant risk factors for causing food safety issues, posing serious threats to human health. Sensitive screening for hazards is beneficial for enhancing public security. However, traditional detection methods are unable to meet the requirements for the field screening of small molecules. Therefore, it is necessary to develop applicable methods with high levels of sensitivity and specificity to identify the small molecules. Aptamers are short-chain nucleic acids that can specifically bind to small molecules. By utilizing aptamers to enhance the performance of recognition technology, it is possible to achieve high selectivity and sensitivity levels when detecting small molecules. There have been several varieties of aptamer target recognition techniques developed to improve the ability to detect small molecules in recent years. This review focuses on the principles of detection platforms, classifies the conjugating methods between small molecules and aptamers, summarizes advancements in aptamer-based conjugate recognition techniques for the detection of small molecules in food, and seeks to provide emerging powerful tools in the field of point-of-care diagnostics.

Advancing Mycotoxin Detection in Food and Feed: Novel Insights from Surface-Enhanced Raman Spectroscopy (SERS)

The implementation of low-cost and rapid technologies for the on-site detection of mycotoxin-contaminated crops is a promising solution to address the growing concerns of the agri-food industry. Recently, there have been significant developments in surface-enhanced Raman spectroscopy (SERS) for the direct detection of mycotoxins in food and feed. This review provides an overview of the most recent advancements in the utilization of SERS through the successful fabrication of novel nanostructured materials. Various bottom-up and top-down approaches have demonstrated their potential in improving sensitivity, while many applications exploit the immobilization of recognition elements and molecular imprinted polymers (MIPs) to enhance specificity and reproducibility in complex matrices. Therefore, the design and fabrication of nanomaterials is of utmost importance and are presented herein. This paper uncovers that limited studies establish detection limits or conduct validation using naturally contaminated samples. One decade on, SERS is still lacking significant progress and there is a disconnect between the technology, the European regulatory limits, and the intended end-user. Ongoing challenges and potential solutions are discussed including nanofabrication, molecular binders, and data analytics. Recommendations to assay design, portability, and substrate stability are made to help improve the potential and feasibility of SERS for future on-site agri-food applications.

The application progress of magnetic solid-phase extraction for heavy metal analysis in food: a mini review

The emerging sample pretreatment technique of magnetic solid-phase extraction (MSPE) has drawn the attention of researchers owing to its advantages of less reagent consumption, fast separation/enrichment process, high adsorption capacity, and simple operation. This paper presents a review of synthesis techniques, classification, and analysis procedures for MSPE in the detection of heavy metals in food. Magnetic adsorbents derived from silica, metal oxides, carbon, polymers, etc., are applied for the detection of heavy metals in food. Then, the recent development of the technology of MSPE for the analysis of heavy metal extraction in food is summarized in detail. Finally, the future outlook for the improvement of MSPE is also discussed.

Biosensors based on core-shell nanoparticles for detecting mycotoxins in food: A review

Mycotoxins are toxic metabolites produced by fungi in the process of infecting agricultural products, posing serious threat to the health of human and animals. Thus, sensitive and reliable analytical techniques for mycotoxin detection are needed. Biosensors equipped with antibodies or aptamers as recognition elements and core-shell nanoparticles (NPs) for the pre-treatment and detection of mycotoxins have been extensively studied. By comparison with monocomponent NPs, core-shell nanostructures exhibit unique optical, electric, magnetic, plasmonic, and catalytic properties due to the combination of functionalities and synergistic effects, resulting in significant improvement of sensing capacities in various platforms, such as surface-enhanced Raman spectroscopy, fluorescence, lateral flow immunoassay and electrochemical sensors. This review focused on the development of core-shell NPs based biosensors for the sensitive and accurate detection of mycotoxins in food samples. Recent developments were categorised and summarised, along with detailed discussion of advantages and shortcomings. The future potential of utilising core-shell NPs in food safety testing was also highlighted.

An "on-off-on" electrochemiluminescence aptasensor based on a self-enhanced luminophore for ochratoxin A detection

A highly selective and sensitive "on-off-on" electrochemiluminescence (ECL) aptasensor based on a self-enhanced luminophore was developed for the detection of ochratoxin A (OTA). Specifically, polyethyleneimine functionalized multi-walled carbon nanotubes decorated with gold nanoparticles (AuNPs-PEI-MWCNTs) were used as the electrode matrix to accelerate electron transfer and provide a favorable microenvironment for self-enhanced luminophore loading and ECL signal enhancement. In addition, black phosphorus quantum dots (BPQDs) were used as co-reactants of the ECL reagent tris (2,2'-bipyridyl) ruthenium(II) (Ru(bpy)32+) in ECL experiments, and the reaction mechanism was investigated. The self-enhanced luminophore Ru@SiO2-BPQDs was obtained by encapsulating Ru(bpy)32+ in silica (SiO2) nanoparticles and then combining it with BPQDs through electrostatic interaction. In conventional ECL systems, the emitter and its co-reactants reacted via the inter-nanoparticle pathway, leading to long distance electron transfer. However, the electron transfer distance in the self-enhanced luminophore was significantly shortened due to the intra-nanoparticle electron transfer pathway because BPQDs and oxidized Ru(bpy)32+ were bound within one nanoparticle, thereby improving ECL efficiency to achieve the first "switch-on" state. Then, the luminophore was quenched using ferrocenes (Fc) modified on an aptamer to achieve the "switch-off" state. Finally, OTA was specifically identified by the adapter, causing Fc to be released from the sensor interface, restoring the ECL intensity to achieve the second "switch-on" state. Under optimal conditions, the aptasensor exhibited good sensitivity, stability, and reproducibility, with a linear detection range from 0.1 to 320 ng/mL and a detection limit of 0.03 ng/mL. The novel ECL aptasensor provided a common analytical tool for the detection of mycotoxins and other small molecules.

Ultrasensitive electrochemical aptasensor with Nafion-stabilized f-MWCNTs as signal enhancers for OTA detection

In this study, an ultrasensitive electrochemical (EC) aptasensor with Nafion-stabilized functionalized multi-walled carbon nanotubes (f-MWCNTs) as signal enhancers was established for ochratoxin A (OTA) determination. Herein, f-MWCNTs were prepared through functionalization with nitric acid. The incorporation of Nafion promoted a good dispersion of f-MWCNTs and prevented their leaching on the electrode, making a robust stability of the aptasensor. The Nafion-f-MWCNTs composites were used as the sensing substrates to largely enhance the electroactive surface area and the conductivity of the electrode, realizing a significant signal amplification. Carboxyl groups on the surface of f-MWCNTs readily exposed from Nafion membrane to couple with streptavidin, facilitating the immobilization of biotinylated aptamers to achieve selective recognition towards OTA. When OTA existed, aptamers preferentially combined with it, causing a noticeable decline in the current response. Under optimum conditions, a good linear relationship between the current changes and the logarithm of OTA concentration was observed from 0.005 ng/mL to 10 ng/mL, with a limit of detection low to 1 pg/mL for OTA. The specific, sensitive, and reproducible aptasensor succeeded in application in malt samples, confirming a great promise for more contaminants and providing a universal platform in complex matrices by simply replacing the corresponding aptamers.

Functional Micro-/Nanostructures in Agrofood Science: Precise Inspection, Hazard Elimination, and Potential Health Risks

Nanotechnology, biotechniques, and chemical engineering have arisen as new trends with significant impacts on agrofood science development. Advanced analytical techniques with high sensitivity, specificity, and automation based on micro-/nanomaterials for food hazard elimination have become leading research hotspots in agrofood science. Research progress in micro-/nanomaterials has provided a solid theoretical basis and technical support to solve problems in the industry. However, the rapid development of micro-/nanostructures has also raised concerns regarding potential risks to human health. This review presents the latest advances in the precise inspection and elimination of food hazards from micro-/nanomaterials and discusses the potential threats to human health posed by nanomaterials. The theoretical reference was provided for the application trend of micro-/nanomaterials in the field of agrofood science in the future.

Simultaneously ultrasensitive and quantitative detection of influenza A virus, SARS-CoV-2, and respiratory syncytial virus via multichannel magnetic SERS-based lateral flow immunoassay

Respiratory viruses usually induced similar clinical symptoms at early infection. Herein, we presented a multichannel surface-enhanced Raman scattering-based lateral flow immunoassay (SERS-based LFA) using high-performance magnetic SERS tags for the simultaneous ultrasensitive detection of respiratory viruses, namely influenza A virus (H1N1), severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and respiratory syncytial virus (RSV) in biological samples. As-prepared magnetic SERS tags can directly enrich and capture target viruses without pretreatment of samples, avoiding the interference of impurities in the samples as well as improving the sensitivity. With the capture-detection method, the detection limits of the proposed assay reached 85 copies mL^-1, 8 pg mL^-1, and 8 pg mL^-1 for H1N1, SARS-CoV-2 and RSV, respectively. Moreover, the detection properties of the proposed method for target viruses in throat swab samples were verified, suggesting its remarkable potential for the early and rapid differential diagnosis of respiratory viruses.

Recent Progress on Solid Substrates for Surface-Enhanced Raman Spectroscopy Analysis

Surface-enhanced Raman spectroscopy (SERS) is a powerful vibrational spectroscopy technique with distinguished features of non-destructivity, ultra-sensitivity, rapidity, and fingerprint characteristics for analysis and sensors. The SERS signals are mainly dependent on the engineering of high-quality substrates. Recently, solid SERS substrates with diverse forms have been attracting increasing attention due to their promising features, including dense hot spot, high stability, controllable morphology, and convenient portability. Here, we comprehensively review the recent advances made in the field of solid SERS substrates, including their common fabrication methods, basic categories, main features, and representative applications, respectively. Firstly, the main categories of solid SERS substrates, mainly including membrane substrate, self-assembled substrate, chip substrate, magnetic solid substrate, and other solid substrate, are introduced in detail, as well as corresponding construction strategies and main features. Secondly, the typical applications of solid SERS substrates in bio-analysis, food safety analysis, environment analysis, and other analyses are briefly reviewed. Finally, the challenges and perspectives of solid SERS substrates, including analytical performance improvement and largescale production level enhancement, are proposed.

Progress on aptamer-based SERS sensors for food safety and quality assessment: methodology, current applications and future trends

It is well known that food safety has aroused extensive attentions from governments to researchers and to food industries. As a versatile technology based on molecular interactions, aptamer sensors which could specifically identify a wide range of food contaminants have been extensively studied in recent years. Surface-enhanced Raman spectroscopy integrated aptamer combines the advantages of both technologies, not only in the ability to specifically identify a wide range of food contaminants, but also in the ultra-high sensitivity, simplicity, portable and speed. To provide beneficial insights into the evaluation techniques in the field of food safety, we offer a comprehensive review on the design strategies for aptamer-SERS sensors in different scenarios, including non-nucleic acid amplification methods ("on/off" mode, sandwich mode, competition model and catalytic model) and nucleic acid amplification methods (hybridization chain reaction, rolling circle amplification, catalytic hairpin assembly). Meanwhile, a special attention is paid to the application of aptamer-SERS sensors in biological (foodborne pathogenic, bacteria and mycotoxins) and chemical contamination (drug residues, metal ions, and food additives) of food matrix. Finally, the challenges and prospects of developing reliable aptamer-SERS sensors for food safety were discussed, which are expected to offer a strong guidance for further development and extended applications.

Rapid and sensitive detection of zearalenone in corn using SERS-based lateral flow immunosensor

Zearalenone (ZEN) is a universal mycotoxin contaminant in corn and its products. A surface-enhanced Raman scattering (SERS) based test strip was proposed for the detection of ZEN, which had the advantages of simplicity, rapidity, and high sensitivity. Core-shell Au@AgNPs with embedded reporter molecules (4-MBA) were synthesized as SERS nanoprobe, which exhibited excellent SERS signals and high stability. The detection range of ZEN for corn samples was 10-1000 μg/kg with the limit of detection (LOD) of 3.6 μg/kg, which is far below the recommended tolerable level (60 μg/kg). More importantly, the SERS method was verified by HPLC in the application on corn samples contaminated with ZEN, and the coincidence rates were in the range of 86.06%-111.23%, suggesting a high accuracy of the SERS assay. Therefore, the SERS-based test strip with an analysis time of less than 15 min is a promising tool for accurate and rapid detection of ZEN-field contamination.

Application of Nanomaterials for Coping with Mycotoxin Contamination in Food Safety: From Detection to Control

Mycotoxins, which are toxic secondary metabolites produced by fungi, are harmful to humans. Mycotoxin-induced contamination has drawn attention worldwide. Consequently, the development of reliable and sensitive detection methods and high-efficiency control strategies for mycotoxins is important to safeguard food industry safety and public health. With the rapid development of nanotechnology, many novel nanomaterials that provide tremendous opportunities for greatly improving the detection and control performance of mycotoxins because of their unique properties have emerged. This review comprehensively summarizes recent trends in the application of nanomaterials for detecting mycotoxins (fluorescence, colorimetric, surface-enhanced Raman scattering, electrochemical, and point-of-care testing) and controlling mycotoxins (inhibition of fungal growth, mycotoxin absorption, and degradation). These detection methods possess the advantages of high sensitivity and selectivity, operational simplicity, and rapidity. With research attention on the control of mycotoxins and the gradual excavation of the properties of nanomaterials, nanomaterials are also employed for the inhibition of fungal growth, mycotoxin absorption, and mycotoxin degradation, and impressive controlling effects are obtained. This review is expected to provide the readers insight into this state-of-the-art area and a reference to design nanomaterials-based schemes for the detection and control of mycotoxins.

A sensitive and simple competitive nanozyme-linked apta-sorbent assay for the dual-mode detection of ochratoxin A

The enzyme-linked apta-sorbent assay (ELASA) is widely used for the detection of small-molecule compounds as a result of low cost and reagent stability of aptamers. However, enzyme labels used in ELASA still suffer from some drawbacks, such as high production cost and limited stability. To overcome the drawbacks, we reported a nanozyme-linked apta-sorbent assay (NLASA) coupled with surface-enhanced Raman scattering (SERS)-colorimetric dual-mode detection. For nanozyme labels, Pd-Pt bimetallic nanocrystals (Pd-Pt NRs) could catalyze 3,3',5,5'-tetramethylbenzidine (TMB) to blue TMB²⁺, whose color variation could not only be distinguished by naked eyes but also had a strong SERS signal. The NLASA method was employed to detect ochratoxin A (OTA) with a limit of detection values of 0.097 nM (0.039 ppb) and 0.042 nM (0.017 ppb) via the colorimetric and SERS methods, respectively. This method was applied for the determination of OTA in wine and grape samples, and the detection results were in a satisfied agreement with those determined by the high performance liquid chromatography tandem mass spectrometry (HPLC-MS/MS) method. The proposed NLASA method provided a rapid and sensitive detection for OTA and could also be broadened for other small-molecules.

Design, Preparation, and Application of Magnetic Nanoparticles for Food Safety Analysis: A Review of Recent Advances

This review (with 126 references) aims at providing an updated overview of the recent developments and innovations of the preparation and application of magnetic nanoparticles for food safety analysis. During the past two decades, various magnetic nanoparticles with different sizes, shapes, and surface modifications have been designed, synthesized, and characterized with the prospering development of material science. Analytical scientists and food scientists are among the ones who bring these novel materials from laboratories to commercial applications. Powerful and versatile surface functional groups and high surface to mass ratios make these magnetic nanoparticles useful tools for high-efficiency capture and preconcentration of certain molecules, even when they exist in trace levels or complicated food matrices. This is why more and more methods for sensitive detection and quantification of hazards in foods are developed based on these magic magnetic tools. In this review, the principles and superiorities of using magnetic nanoparticles for food pollutant analysis are first introduced, like the mechanism of magnetic solid phase extraction, a most commonly used method for food safety-related sample pretreatment. Their design and preparation are presented afterward, alongside the mechanisms underlying their application for different analytical purposes. After that, recently developed magnetic nanoparticle-based methods for dealing with food pollutants such as organic pollutants, heavy metals, and pathogens in different food matrices are summarized in detail. In the end, some humble outlooks on future directions for work in this field are provided.

A CdSe@CdS quantum dots based electrochemiluminescence aptasensor for sensitive detection of ochratoxin A

In this work, a CdSe@CdS quantum dots (QDs) based label-free electrochemiluminescence (ECL) aptasensor was developed for the specific and sensitive detection of ochratoxin A (OTA). Chitosan (CHI) could immobilize abundant QDs on the surface of an Au electrode as the luminescent nanomaterials. Glutaraldehyde was used as the crosslinking agent for coupling a large number of OTA aptamers. Thanks to the excellent stability, good biocompatibility, and strong ECL intensity of CdSe@CdS QDs, as well as the quick reactions of the generated SO₄•- in the electrolyte, strong ECL signals were measured. Because of the specific recognition of aptamer toward OTA, the reduced ECL signals caused by OTA in the samples were recorded for quantify the content of OTA. After optimizing a series of crucial conditions, the ECL aptasensor displayed superior sensitivity for OTA with a detection limit of 0.89 ng/mL and a wide linear concentration range of 1-100 ng/mL. The practicability and viability were verified through the rapid and facile analysis of OTA in real Lily and Rhubarb samples with recovery rates (n = 3) of 98.1-105.6% and 97.3-101.5%, respectively. The newly-developed QDs-based ECL aptasensor provided a new universal analytical tool for more mycotoxins in safety assessment of foods and feeds, environmental monitoring, and clinical diagnostics.

Advances in Surface-Enhanced Raman Scattering-Based Aptasensors for Food Safety Detection

Owing to the excellent performances of high sensitivity, high specificity, on-site detection, and multiplexing capability, surface-enhanced Raman scattering (SERS)-based aptasensors have performed prosperous applications and gained impressive progress in food safety. Herein, we reviewed the SERS-based aptasensors from the principles to specific applications in food safety. First, the sensor-working principles, SERS label design and preparation are introduced. Then, the popular platforms in the aptasensors are summarized with their advantages and disadvantages, followed by their representative applications. Further, the specific applications of developing SERS-based aptasensors in food safety are systematically provided. Moreover, the multiplex analysis using SERS labels are highlighted. Finally, challenges and perspectives for improving the SERS-based aptasensor performance are also discussed, aiming to give some proposes for researchers to choose suitable SERS-based aptasensors according to specific applications.

Aptasensors for mycotoxins in foods: Recent advances and future trends

Mycotoxin contamination in foods has posed serious threat to public health and raised worldwide concern. The development of simple, rapid, facile, and cost-effective methods for mycotoxin detection is of urgent need. Aptamer-based sensors, abbreviated as aptasensors, with excellent recognition capacity to a wide variety of mycotoxins have attracted ever-increasing interest of researchers because of their simple fabrication, rapid response, high sensitivity, low cost, and easy adaptability for in situ measurement. The past few decades have witnessed the rapid advances of aptasensors for mycotoxin detection in foods. Therefore, this review first summarizes the reported aptamer sequences specific for mycotoxins. Then, the recent 5-year advancements in various newly developed aptasensors, which, according to the signal output mode, are divided into electrochemical, optical and photoelectrochemical categories, for mycotoxin detection are comprehensively discussed. A special attention is taken on their strengths and limitations in real-world application. Finally, the current challenges and future perspectives for developing novel highly reliable aptasensors for mycotoxin detection are highlighted, which is expected to provide powerful references for their thorough research and extended applications. Owing to their unique advantages, aptasensors display a fascinating prospect in food field for safety inspection and risk assessment.

Recent Advances in (Bio)Chemical Sensors for Food Safety and Quality Based on Silver Nanomaterials

There is a continuing need for tools and devices which can simplify, quicken and reduce the cost of analyses of food safety and quality. Chemical sensors and biosensors are increasingly being developed for this purpose, reaping from the opportunities provided by nanotechnology. Due to the distinct electrical and optical properties of silver nanoparticles (AgNPs), this material plays a vital role in (bio)sensor development. This review is an analysis of chemical sensors and biosensors based on silver nanoparticles with application in food and beverage matrices. It consists of academic research published from 2015 to 2020. The paper is structured to separately explore the designs of two major (bio)sensor classes: electrochemical (including voltammetric and impedimetric sensors) and optical sensors (including colourimetric and luminescent), with special focus on the type of silver nanomaterial and its role in the sensor system. The review indicates that diverse nanosensors have been developed, capable of detecting analytes such as pesticides, mycotoxins, fertilisers, microorganisms, heavy metals, and various additives with exceptional analytical performance. Current trends in the design of such sensors are highlighted and challenges which need to be overcome in the future are discussed.

On-site and quantitative SERS detection of trace 1, 2, 3-benzotriazole in transformer oil with colloidal lignin particles-based green pretreatment reagents

Since 1, 2, 3-Benzotriazole (BTA) is one of the most commonly used metal passivators in transformer oil, on-site and quantitative detection of BTA plays a significant role in fast evaluation of the performance of the insulating oil. Herein, we proposed a cycle-growth synthetic protocol for yielding two-dimensional (2D) plane-based surface-enhanced Raman scattering (SERS) substrates with tunable optical property and controllable interparticle distance, and an extraction material, so called colloidal lignin particles (CLPs), for the fast separation of BTA from oil matrix. After BTA from transformer oil were adsorbed by hydrophilic CLPs, highly reproducible SERS signal of BTA can be obtained by dropping on the substrate. The characteristic Raman shift at 1386 cm^-1 of BTA has been selected to establish a good linearity between its relative intensity and concentration in the range of 1-300 mg/L, and the detection limit for BTA was down to 0.12 mg/L. Moreover, the time consumption for the whole detection process of real sample including sample pretreatment and SERS measurements was less than 30 min. It is highly expected that the combination of CLPs with SERS can accomplish the on-site detection of trace BTA in transformer oil.

Aptasensors for mycotoxin detection: A review

Mycotoxins are toxic compounds produced by fungi, which represent a risk to the food and feed supply chain, having an impact on health and economies. A high percentage of feed samples have been reported to be contaminated with more than one type of mycotoxin. Systematic, cost-effective and simple tools for testing are critical to achieve a rapid and accurate screening of food and feed quality. In this review, we describe the various aptamers that have been selected against mycotoxins and their incorporation into optical and electrochemical aptasensors, outlining the strategies exploited, highlighting the advantages and disadvantages of each approach. The review also discusses the different materials used and the immobilization methods employed, with the aim of achieving the highest sensitivity and selectivity.

Detection of Mycotoxins in Food Using Surface-Enhanced Raman Spectroscopy: A Review

Mycotoxins are toxic metabolites produced by fungi that contaminate many important crops worldwide. Humans are commonly exposed to mycotoxins through the consumption of contaminated food products. Mycotoxin contamination is unpredictable and unavoidable; it occurs at any point in the food production system under favorable conditions, and they cannot be destroyed by common heat treatments, because of their high thermal stability. Early and fast detection plays an essential role in this unique challenge to monitor the presence of these compounds in the food chain. Surface-enhanced Raman spectroscopy (SERS) is an advanced spectroscopic technique that integrates Raman spectroscopic molecular fingerprinting and enhanced sensitivity based on nanotechnology to meet the requirement of sensitivity and selectivity, but that can also be performed in a cost-effective and straightforward manner. This Review focuses on the SERS methodologies applied to date for qualitative and quantitative analysis of mycotoxins based on a variety of SERS substrates, as well as our perspectives on current limitations and future trends for applying this technique to mycotoxin analyses.

Recent progress in mycotoxins detection based on surface-enhanced Raman spectroscopy

Mycotoxins are toxic compounds naturally produced by certain types of fungi. The contamination of mycotoxins can occur on numerous foodstuffs, including cereals, nuts, fruits, and spices, and pose a major threat to humans and animals by causing acute and chronic toxic effects. In this regard, reliable techniques for accurate and sensitive detection of mycotoxins in agricultural products and food samples are urgently needed. As an advanced analytical tool, surface-enhanced Raman spectroscopy (SERS), presents several major advantages, such as ultrahigh sensitivity, rapid detection, fingerprint-type information, and miniaturized equipment. Benefiting from these merits, rapid growth has been observed under the topic of SERS-based mycotoxin detection. This review provides a comprehensive overview of the recent achievements in this area. The progress of SERS-based label-free detection, aptasensor, and immunosensor, as well as SERS combined with other techniques, has been summarized, and in-depth discussion of the remaining challenges has been provided, in order to inspire future development of translating the techniques invented in scientific laboratories into easy-to-operate analytic platforms for rapid detection of mycotoxins.

Detection of food spoilage and adulteration by novel nanomaterial-based sensors

Food industry is always looking for more innovative and accurate ways to monitor the food safety and quality control of final products. Current detection techniques of analytes are costly and time-consuming, and occasionally require professional experts and specialized tools. The usage of nanomaterials in sensory systems has eliminated not only these drawbacks but also has advantages such as higher sensitivity and selectivity. This article first presents a general overview of the current studies conducted on the detection of spoilage and adulteration in foods from 2015 to 2020. Then, the sensory properties of nanomaterials including metal and magnetic nanoparticles, carbon nanostructures (nanotubes, graphene and its derivatives, and nanofibers), nanowires, and electrospun nanofibers are presented. The latest investigations and advancements in the application of nanomaterial-based sensors in detecting spoilage (food spoilage pathogens, toxins, pH changes, and gases) and adulterants (food additives, glucose, melamine, and urea) have also been discussed in the following sections. To conclude, these sensors can be applied in the smart packaging of food products to meet the demand of consumers in the new era.

Recent advances in aptasensors for mycotoxin detection: On the surface and in the colloid

Mycotoxins are a great potential threat to human health, and the progress in the development of mycotoxin detection methods is of an escalating importance with the increasing emphasis on food safety. Aptamer, performing the same function as antibody in specific binding with targets, exhibits profound potential in biosensing since its debut in 1990. Recent years have witnessed the rapid development of aptasensors for mycotoxin detection with the achievement of ultralow limit of detection and high sensitivity in the lab. However, there is still no officially approved aptasensing methods in mycotoxin detection application. In order to provide researchers with inspirations in the design and development of aptasensors for mycotoxin detection, we divide these aptasensors into two types, namely "on the surface" and "in the colloid", according to the location where the key sensing reaction occurs. We also systematically review aptasensors reported in the past 5 years under the abovementioned criterion of classification, and compare the advantages and disadvantages of each kind of aptasensors. Finally, we discuss prospective directions in the development of aptasensors for mycotoxin detection. This paper will offer insight and motivation to practitioners working on the research and practical application of aptasensors in the detection of mycotoxins and other substances.

AuNanostar@4-MBA@Au Core-Shell Nanostructure Coupled with Exonuclease III-Assisted Cycling Amplification for Ultrasensitive SERS Detection of Ochratoxin A

The "turn-on" mode surface-enhanced Raman scattering (SERS) aptasensor for ultrasensitive ochratoxin A (OTA) detection was developed based on the SERS "hot spots" of AuNanostar@4-MBA@Au core-shell nanostructures (AuNS@4-MBA@Au) and exonuclease III (Exo III)-assisted target cycle amplification strategy. Compared with conventional gold nanoparticles, AuNS@4-MBA@Au provides a much higher SERS enhancement factor because AuNS exhibits a larger surface roughness and the lightning rod effect, as well as an excellent electromagnetic field between the AuNS core and the Au shell, which contribute to the superstrong SERS signal. Meanwhile, Exo III-assisted target cycle amplification can be used as an effective method for the further amplified detection of OTA. Additionally, the utilization of streptavidin magnesphere paramagnetic particles offers a green, economical, and facile technology for the accumulation and separation of the signal probe AuNS@4-MBA@Au from solution. All these factors lead to a significant enhancement of detectable signals and superhigh sensitivity. As a result, the limit of detection as low as 0.25 fg mL^-1 could be achieved, which was lower than that in the other reported literatures on SERS methods for OTA detection as we know. The developed SERS aptasensor also provides a promising tool for foodstuff detection.

Multifunctional Fe3O4@Au supraparticle as a promising thermal contrast for an ultrasensitive lateral flow immunoassay

An ultrasensitive lateral flow immunoassay (LFIA) strip has been developed based on a multifunctional photothermal contrast Fe₃O₄@Au supraparticle (Fe₃O₄@Au SP) for quantitative Ochratoxin A (OTA) detection. The Fe₃O₄@Au SP composite not only shows a better photothermal effect over Fe₃O₄ and gold nanoparticles, but possesses magnetic property and excellent ability to directly adsorb protein (antibody). Under 808 nm irradiation, photothermal images of the test strips are recorded by a portable Infrared thermal camera. A quantitative analysis is easily achieved based on the thermal changes, which are proportional to the concentrations of analytes. Under an optimal condition, a wide linear detection range from 1 pg mL⁻¹ to 1μgmL⁻¹ and a limit of detection (LOD) at 0.12 pg mL⁻¹ have been achieved with OTA as a model analytes. The practical application potential has also been validated by detection of OTA in spiked corn, peanut, and soybean extractives with overall recoveries ranging from 98.6% to 115% and coefficient of variations (CVs) between 6.06% and 12.73%. The photothermal LFIA renders a rapid, sensitive, and quantitative bio-/chemo-sensing platform with only a portable laser source and a thermal camera.

Multicolor colorimetric detection of ochratoxin A via structure-switching aptamer and enzyme-induced metallization of gold nanorods

Colorimetric aptasensors have been intensively studied for the ochratoxin A (OTA) detection, but they mostly exhibit just one-color change, resulting in poor visual resolution and limited use for semi-quantitative analysis. Thus, we designed a high-resolution colorimetric assay on the basis of aptamer structural switching and enzyme-induced metallization of gold nanorods (AuNRs). DNA-alkaline phosphatase (ALP)-immobilized magnetic beads were prepared. The aptamer bounded to OTA to form G-quadruplexes, releasing ALP-labelled complementary DNA (cDNA-ALP). After magnetic separation, cDNA-ALP catalyzed the decomposition of ascorbic acid 2-phosphate to ascorbic acid that reduced Ag⁺, forming an Ag shell on the surface of AuNRs. This caused a blue-shift of the longitudinal local surface plasmon resonance peak of the AuNRs and a naked eye visible multicolor change. Under optimal conditions, the assay exhibited a 9.0 nM detection limit for OTA, with high specificity. This method is promising for the on-site visual semi-quantitative detection of mycotoxins in foods.

Core-satellite assemblies and exonuclease assisted double amplification strategy for ultrasensitive SERS detection of biotoxin

In this work, core-satellite assemblies and exonuclease assisted double amplification strategy is developed to produce surface-enhanced Raman scattering (SERS) biosensor towards ultrasensitive detection of biotoxin. In the presence of target molecules, the exonuclease III (Exo III) assisted efficient recycling amplification provides an excellent pathway for the fabrication of core-satellite SERS sensor. Briefly, the proposed strategy includes the following double amplifications: (i) Exo III induced target-related signal amplification; (ii) core-satellite assemblies assisted formation of SERS "hot-spots" induced signal amplification. To show the applicability of the suggested strategy, the detection of ochratoxin A (OTA), one of the most toxic and widely distributed biotoxin, is demonstrated as an example. The results show that the limit of detection (LOD) of OTA is 0.83 fg mL^-1 (S/N = 3). On the basis of the DNA aptamer induced specific target recognition, hence our sensing strategy is easy to be expended to the ultrasensitive detection of other targets, e.g., DNAs, RNAs, and other molecules that have corresponding DNA aptamers.

Recent achievements in exosomal biomarkers detection by nanomaterials-based optical biosensors - A review

Exosomal biomarkers including tumor-derived exosomes, exosomal surface proteins and exosomal nucleic acids have emerged as one of the most important and general cancer biomarkers in modern biomedical science. These indicators can provide momentous biological information for early diagnosis and treatment of cancer. Recently, numerous studies have been conducted to design biosensors for exosomal biomarkers detection and profiling with high sensitivity and strong applied ability. Among these biosensors, nanomaterial-based optical biosensors are prospective future platforms for rapid and cost-effective detection of exosomal biomarkers. Firstly, we have focused on the progress and advancements in different optical-transducing approaches (Surface-Enhanced Raman Scattering, Surface Plasmon Resonance, Colorimetry, Immunochromatographic assay, Chemiluminescence, Electrochemiluminescence, and fluorescence) for detecting and profiling exosomal biomarkers. Additionally, we have summarized strengths and drawbacks of each strategy. Finally, challenges and future outlooks in developing efficient nanomaterial-based optical biosensor systems for exosomal tumor biomarkers detection have been discussed. The review will exhibit an overview of this field and provide meaningful information for scientific researchers.

Ultrasensitive and regenerable nanopore sensing based on target induced aptamer dissociation

For ionic current rectification (ICR) based sensing, nanopore functionalizations are mostly designed for directly binding target molecules to generate detectable signals from surface charge variation. However, this strategy is highly dependent on the charge difference between the captured molecules and surface functionalization layers, which will increase the nanopore design difficulty and subsequently limit the nanopore applicability. Another key challenge for ICR based sensing is the nanopore regenerability that is critical if online monitoring or repeated determination needs to be performed with one sensor. Though some types of nanopore regeneration have been realized on some specific targets or with harsh conditions, it is still highly favored to develop a regenerability using mild conditions for various targets. To address these two challenges, we developed a novel and universal sensing strategy for aptamer-functionalized nanopore that can be easily regenerated after each usage without any harsh conditions and independent of target molecule charge or size for ICR based nanopore sensing. Ochratoxin A (OTA) was used as a model analyte and its corresponding aptamer partially hybridized with the pre-immobilized complementary DNA (cDNA) onto the nanopore inner surface. We demonstrated that the recognition and conjugation of OTA with its aptamer resulted in rectified ionic current variations due to the dissociation between the OTA aptamer and its partially paired cDNA. The performance of this nanopore sensor including sensitivity, selectivity, regenerability, and applicability was characterized using rectified ionic current. This nanopore sensing strategy will provide a promising platform for extensive targets and online sensing applications.

A SERS-based competitive immunoassay for highly sensitive and specific detection of ochratoxin A

A SERS sensor for ochratoxin A detection based on three-dimensional magnetic beads and competitive immunoassay.

A review on recent developments in optical and electrochemical aptamer-based assays for mycotoxins using advanced nanomaterials

This review (with 163 refs) covers the recent developments of nanomaterial-based optical and electrochemical sensors for mycotoxins. The review starts with a brief discussion on occurrence, distribution, toxicity of mycotoxins and the legislations in monitoring their levels. It further outlines the research methods, various recognition matrices and the strategies involved in the development of highly sensitive and selective sensor systems. It also points out the salient features and importance of aptasensors in the detection of mycotoxins along with the different immobilization methods of aptamers. The review meticulously discusses the performance of different optical and electrochemical sensors fabricated using aptamers coupled with nanomaterials (CNT, graphene, metal nanoparticles and metal oxide nanoparticles). The review addresses the limitations in the current developments as well as the future challenges involved in the successful construction of aptasensors with the functionalized nanomaterials. Graphical abstract Recent developments in nanomaterial based aptasensors for mycotoxins are summarized. Specifically, the efficiency of the nanomaterial coupled aptasensors (such as CNT, graphene, metal nanoparticles and metal oxide nanoparticles) in optical and electrochemical methods are discussed.

Development and Application of Aptamer-Based Surface-Enhanced Raman Spectroscopy Sensors in Quantitative Analysis and Biotherapy

Surface-enhanced Raman scattering (SERS) is one of the most special and important Raman techniques. An apparent Raman signal can be observed when the target molecules are absorbed onto the surface of the SERS substrates, especially on the "hot spots" of the substrates. Early research focused on exploring the highly active SERS substrates and their detection applications in label-free SERS technology. However, it is a great challenge to use these label-free SERS sensors for detecting hydrophobic or non-polar molecules, especially in complex systems or at low concentrations. Therefore, antibodies, aptamers, and antimicrobial peptides have been used to effectively improve the target selectivity and meet the analysis requirements. Among these selective elements, aptamers are easy to use for synthesis and modifications, and their stability, affinity and specificity are extremely good; they have been successfully used in a variety of testing areas. The combination of SERS detection technology and aptamer recognition ability not only improved the selection accuracy of target molecules, but also improved the sensitivity of the analysis. Variations of aptamer-based SERS sensors have been developed and have achieved satisfactory results in the analysis of small molecules, pathogenic microorganism, mycotoxins, tumor marker and other functional molecules, as well as in successful photothermal therapy of tumors. Herein, we present the latest advances of the aptamer-based SERS sensors, as well as the assembling sensing platforms and the strategies for signal amplification. Furthermore, the existing problems and potential trends of the aptamer-based SERS sensors are discussed.

Advances in biosensors for the detection of ochratoxin A: Bio-receptors, nanomaterials, and their applications

Ochratoxin A (OTA) is a class of mycotoxin mainly produced by the genera Aspergillus and Penicillium. OTA can cause various forms of kidney, liver and brain diseases in both humans and animals although trace amount of OTA is normally present in food. Therefore, development of fast and sensitive detection technique is essential for accurate diagnosis of OTA. Currently, the most commonly used detection methods are enzyme-linked immune sorbent assays (ELISA) and chromatographic techniques. These techniques are sensitive but time consuming, and require expensive equipment, highly trained operators, as well as extensive preparation steps. These drawbacks limit their wide application in OTA detection. On the contrary, biosensors hold a great potential for OTA detection at for both research and industry because they are less expensive, rapid, sensitive, specific, simple and portable. This paper aims to provide an extensive overview on biosensors for OTA detection by highlighting the main biosensing recognition elements for OTA, the most commonly used nanomaterials for fabricating the sensing interface, and their applications in different read-out types of biosensors. Current challenges and future perspectives are discussed as well.

Surface-Enhanced Raman Scattering-Fluorescence Dual-Mode Nanosensors for Quantitative Detection of Cytochrome c in Living Cells

During apoptosis process, the release of cytochrome c (Cyt c) is considered to be a key factor in the intrinsic pathway and is often defined as no regression point. Quantitative detection of intracellular Cyt c remains a challenge. Herein, we have developed surface-enhanced Raman scattering (SERS)-fluorescence dual-mode nanosensors for the quantitative assay of Cyt c in living cells. Dual signal detection was achieved by constructing gold nanotriangles (AuNTs) nanosensors capable of specifically recognizing Cyt c. The nanosensors were prepared by modifying the aptamer of Cyt c on AuNTs and connecting the complementary strands modified with Cy5. The AuNTs provided both enhanced SERS signals and fluorescence quenching effects. Once cells were induced by external stimulus (such as toxins) to release Cyt c, Cyt c would specifically bind to its aptamer, and the complementary strands modified with Cy5 would detach which would result in weakened SERS signal and recovery of fluorescence signal. The experimental results showed that the nanosensors not only had excellent selectivity and sensitivity but also realized real-time monitoring of Cyt c translocation event from mitochondria to cytoplasm. The SERS and fluorescence intensity showed good linear relationship with Cyt c concentration ranging from 0.044 to 9.95 μM and achieved a minimum limit of detection (LOD) of 0.02 μM in living cells. The accuracy of intracellular Cyt c quantitative results was more than 90% compared with the ELISA results.

Miniaturized array gas membrane separation strategy for rapid analysis of complex samples by surface-enhanced Raman scattering

It remains a significant challenge for fast and high-throughput detection of trace analytes in complex samples with surface-enhanced Raman scattering (SERS) strategy due to the severe interference from matrices. In this work, a miniaturized array gas membrane separation (AGMS) device coupled with SERS was designed and drew up to eliminate matrix influence and improve the reproducibility of SERS signal during real sample analysis. The design of miniaturized AGMS tube was optimized based on quantitative calculation of its air permeability by computational fluid dynamics simulation. A 10 mm height tube was selected as an optimized design with a recovery of 98.3% for acetaldehyde. The practical feasibility of miniaturized AGMS was validated based on the applications in biochemical analysis and food analysis, such as albuminuria and acetaldehyde in urine sample and metaldehyde and thiram in food samples. The results showed that SERS responses of all analytes dramatically increased by eliminating sample matrices after miniaturized AGMS process. Acetaldehyde, albuminuria, metaldehyde and thiram in real samples could be accurately quantified with recoveries of 82.0-123.3%, and the analytical results were validated by corresponding standard methods with relative error ranging from -4.8% to 5.3%. Time consumption of miniaturized AGMS-SERS for one real sample analysis including sample preparation and determination was less than 20 min and could treat 96 samples with 45 min in one run. It is potential that the miniaturized AGMS technique automated by implementation with a robotic arm could greatly expand the range and accelerate the speed of SERS analysis.