Dopamine-assisted immobilization of poly(ethylene imine) based polymers for control of cell-surface interactions

Near-infrared light responsive gold nanoparticles coating endows polyetheretherketone with enhanced osseointegration and antibacterial properties

Polyetheretherketone (PEEK) is considered as a promising dental implant material owing to its excellent physicochemical and mechanical properties. However, its wide range of applications is limited by its biologically inert nature. In this study, a near-infrared (NIR) light responsive bioactive coating with gold nanoparticles (AuNPs) and metronidazole adhered to the PEEK surface via dopamine polymerization. Compared to pure PEEK, the hydrophilicity of the treated PEEK surface was significantly improved. In addition, under NIR light, the surface coating exhibited photothermal conversion effect, and gold nanoparticles and the antibiotic can be released from the coating. This improved the antibacterial properties of PEEK materials. Moreover, the coating was more conducive to the early adhesion of bone mesenchymal stem cells. The results of in vitro and in vivo osteogenic activity studies showed that the developed coating promoted osseointegration of PEEK implants, and NIR light irradiation further improved the antibacterial ability and osteogenic activity of PEEK implants. Through RNA sequencing, the potential underlying mechanism of promoting bone formation of the AuNPs coating combined metronidazole was interpreted. In summary, the developed coating is a potential surface treatment strategy that endows PEEK with enhanced osseointegration and antibacterial properties.

A nonenzymic microfiber optic-biosensor modified phenylboric acid for sensitively and specifically detecting low glucose concentration

A microfiber interferometer coated with sensitive films formed by amide bond between 3-Carboxy-4-fluorophenylboronic acid (FPBA) and polydopamine (PDA) for the detection of trace glucose concentration is designed and demonstrated. Due to a huge evanescent field, this microfiber interferometer has a very sensitive response to the refractive index (RI) of the surrounding environment, which has excellent sensing performance including RI sensitivity response of 1825.83 nm/RIU and low temperature response of -0.04 nm/°C. Due to the good film-forming performance of PDA, whose the amino group coupled with the carboxyl molecule on FPBA to form an amide bond, PDA/FPBA can be attached to the microfiber interferometer for detecting different concentrations of glucose. The concentration range of glucose detection is 0.1-20 mM with a sensitivity of 1.71 nm/mM and a limit of detection of 12.6 ppm. Finally, the sensor is tested in actual samples of human urine to detect different concentrations of glucose and proved to be responsive and reproducible in urine. We can estimate the concentration of glucose in urine by wavelength shift. The sensor has the advantages of simple manufacture, low cost, high sensitivity, and specific recognition glucose in urine. In addition, the success of this sensor shows that the combination of ultrafine fiber and organic chemical materials has broad prospects in the field of optical detection.

Fabrication of Transparent PEGylated Antifouling Coatings via One-Step Pyrogallol Deposition

Antifouling coatings are critical for many biomedical devices. A simple and universal technique used to anchor antifouling polymers is important in order to expand its applications. In this study, we introduced the pyrogallol (PG)-assisted immobilization of poly(ethylene glycol) (PEG) to deposit a thin antifouling layer on biomaterials. Briefly, biomaterials were soaked in a PG/PEG solution and PEG was immobilized onto the biomaterial surfaces via PG polymerization and deposition. The kinetics of PG/PEG deposition started with the deposition of PG on the substrates, followed by the addition of a PEG-rich adlayer. However, prolonged coating added a top-most PG-rich layer, which deteriorated the antifouling efficacy. By controlling the amounts of PG and PEG and the coating time, the PG/PEG coating was able to reduce more than 99% of the adhesion of L929 cells and the adsorption of fibrinogen. The ultrathin (tens of nanometers) and smooth PG/PEG coating was easily deposited onto a wide variety of biomaterials, and the deposition was robust enough to survive harsh sterilization conditions. Furthermore, the coating was highly transparent and allowed most of the UV and Vis light to pass through. The technique has great potential to be applied to biomedical devices that need a transparent antifouling coating, such as intraocular lenses and biosensors.

Effect of Codeposition of Polydopamine with Polyethylenimine or Poly(ethylene glycol) Coatings on Silver Nanoparticle Synthesis

This study investigated the effects of polydopamine (PDA), PDA/polyethylenimine (PEI), and PDA/poly(ethylene glycol) (PEG) deposition on silver nanoparticle (AgNP) formation. PEI or PEG with different molecular weights was mixed with dopamine at different concentrations to obtain various PDA/PEI or PDA/PEG codepositions. These codepositions were soaked in silver nitrate solution to observe AgNPs generated on the surface and then to examine the catalytic activity of AgNPs for the reduction of 4-nitrophenol to 4-aminophenol. Results revealed that AgNPs on PDA/PEI or PDA/PEG codepositions were smaller and more dispersed than those on PDA coatings. Codeposition with 0.5 mg/mL polymer and 2 mg/mL dopamine generated the smallest AgNPs in each codeposition system. The content of AgNPs on PDA/PEI codeposition first increased and then decreased with an increase in the PEI concentration. PEI with a molecular weight of 600 (PEI₆₀₀) generated a higher AgNP content than did PEI with a molecular weight of 10000. The AgNP content did not change with the concentration and molecular weight of PEG. Except for the codeposition with 0.5 mg/mL PEI₆₀₀, codepositions produced less silver than did the PDA coating. The catalytic activity of AgNPs on all codepositions was better than that on PDA. The catalytic activity of AgNPs on all codepositions was related to the size of AgNPs. Smaller AgNPs exhibited more satisfactory catalytic activity. The codeposition with 0.5 mg/mL PEI₆₀₀ had the highest rate constant (1.64 min^-1). The systematic study provides insight into the relationship between various codepositions and AgNP generation and demonstrates that the composition of these codepositions can be tuned to increase their applicability.

MoS2/PDA@Cu composite as a peroxidase-mimicking enzyme with high-effect antibacterial and anticancer activity

Since nanozymes were proposed, their applications have become more and more extensive. As a research hotspot in recent years, MoS₂ also shows many enzyme-like properties. However, as a novel peroxidase, MoS₂ has the disadvantage of a low maximum reaction rate. In this study, the MoS₂/PDA@Cu nanozyme was synthesized by a wet chemical method. The modification of PDA on the surface of MoS₂ achieved the uniform growth of small-sized Cu Nps. The obtained MoS₂/PDA@Cu nanozyme displayed excellent peroxidase-like activity and antibacterial properties. The minimum inhibitory concentration (MIC) of the MoS₂/PDA@Cu nanozyme against S. aureus reached 25 μg mL^-1. Furthermore, it showed a more pronounced inhibitory effect on bacterial growth with the addition of H₂O₂. The maximum reaction rate (V_max) of the MoS₂/PDA@Cu nanozyme is 29.33 × 10^-8 M s^-1, which is significantly higher as compared to that of HRP. It also exhibited excellent biocompatibility, hemocompatibility and potential anticancer properties. When the concentration of the nanozyme was 160 μg mL^-1, the viabilities of 4T1 cells and Hep G2 cells were 45.07% and 32.35%, respectively. This work indicates that surface regulation and electronic transmission control are good strategies for improving peroxidase-like activity.

pH-Sensitive Polydopamine-La (III) Complex Decorated on Carbon Nanofiber toward On-Demand Release Functioning of Epoxy Anti-Corrosion Coating

The high aspect ratio and unique thermal and electrical characteristics of carbon nanofiber (CNF) made it an ideal physical barrier against the penetration of corrosive ions. However, the poor compatibility of the CNF with the polymer matrix and the lack of active corrosion inhibitors are the key limitations of this nanomaterial, resulting in short-term anti-corrosion resistance. An intelligent self-healing epoxy (EP) coating, including CNF modified with a polydopamine (PDA)-La³⁺ complex, was successfully fabricated to overcome these issues. Electrochemical impedance spectroscopy (EIS) evaluation implied that mild steel (MS) submerged in a 3.5 wt % NaCl solution containing the CNF-PDA-La extract had a total corrosion resistance (R_T) of 3107 Ω cm² after 24 h, which is much greater than the MS immersed in the blank solution (1378 Ω cm²). Furthermore, the potentiodynamic polarization analysis indicated a 50% reduction in the corrosion rate (CR) of the MS soaked in the solution containing released PDA and La³⁺ inhibitors compared to the blank solution. EIS and salt spray analysis were used to assess the self-healing capabilities of epoxy coatings incorporating modified CNFs. EIS assessment of scratched coatings revealed a 117% improvement in R_T of the CNF-PDA-La/EP coating compared to the Blank/EP after 10 h of immersion in the saline solution. This enhancement is due to the intelligent release of PDA and La³⁺ inhibitors at the scratch sites, which can mitigate MS corrosion by forming a PDA-Fe complex and the deposition of La(OH)₃ on the MS surface. The salt spray test results also exhibited the CNF-PDA-La/EP coating's superior anti-corrosion capabilities after 20 days. Hence, this research presents a logical approach for developing anti-corrosion coatings with improved nanofiller compatibility and self-healing characteristics.

One-step electrochemical deposition of antifouling polymers with pyrogallol for biosensing applications

Electrochemical techniques are highly sensitive and label-free sensing methods for the detection of various biomarkers, toxins, or pathogens. An ideal sensing element should be electroconductive, nonfouling, and readily available for conjugation of ligands. In this work, we have developed a facile, one-step electrodeposition method based on pyrogallol polymerization for preparation of a nonfouling and biotinylated surface on indium tin oxide (ITO). A copolymer of sulfobetaine methacrylate and aminoethyl methacrylate (pSBAE) was synthesized and deposited on ITO in the presence of pyrogallol via cyclic voltammetry. The deposition took less than 15 minutes to sufficiently inhibit cell adhesion. Using biotinylated pSBAE, the modified surface resisted nonspecific protein adsorption from the fetal bovine serum solution and detected added avidin concentrations. The results show an efficient platform to fabricate an electrochemical biosensor for the detection of biomarkers. We expect that this facile one-step technology could be applied to conjugate various biosensing elements for nonfouling biosensors.

Fabrication of Polysulfobetaine Gradient Coating via Oxidation Polymerization of Pyrogallol To Modulate Biointerfaces

A surface with a gradient physical or chemical feature, such as roughness, hardness, wettability, and chemistry, serves as a powerful platform for high-throughput investigation of cell responses to a biointerface. In this work, we developed a continuous antifouling gradient surface using pyrogallol (PG) chemistry. A copolymer of a zwitterionic monomer, sulfobetaine methacrylate, and an amino monomer, aminoethyl methacrylate, were synthesized (pSBAE) and deposited on glass slides via the deposition of self-polymerized PG. A gradient of pSBAE was fabricated on glass slides in 7 min in the presence of an oxidant, ammonium persulfate, by withdrawing the reaction solution. The modified glass slide showed a wettability gradient, determined by measuring the water contact angle. Cell adhesion and protein adsorption were well correlated with surface wettability. We expect that this simple and faster method for the fabrication of a continuous chemical gradient is applicable for high-throughput screening of surface properties to modulate biointerfaces.

Improved Osteogenesis by Mineralization Combined With Double-Crosslinked Hydrogel Coating for Proliferation and Differentiation of Mesenchymal Stem Cells

In consideration of improving the interface problems of poly-L-lactic acid (PLLA) that hindered biomedical use, surface coatings have been explored as an appealing strategy in establishing a multi-functional coating for osteogenesis. Though the layer-by-layer (LBL) coating developed, a few studies have applied double-crosslinked hydrogels in this technique. In this research, we established a bilayer coating with double-crosslinked hydrogels [alginate–gelatin methacrylate (GelMA)] containing bone morphogenic protein (BMP)-2 [alginate-GelMA/hydroxyapatite (HA)/BMP-2], which displayed great biocompatibility and osteogenesis. The characterization of the coating showed improved properties and enhanced wettability of the native PLLA. To evaluate the biosafety and inductive ability of osteogenesis, the behavior (viability, adherence, and proliferation) and morphology of human bone mesenchymal stem cells (hBMSCs) on the bilayer coatings were tested by multiple exams. The satisfactory function of osteogenesis was verified in bilayer coatings. We found the best ratios between GelMA and alginate for biological applications. The Alg70-Gel30 and Alg50-Gel50 groups facilitated the osteogenic transformation of hBMSCs. In brief, alginate-GelMA/HA/BMP-2 could increase the hBMSCs’ early transformation of osteoblast lineage and promote the osteogenesis of bone defect, especially the outer hydrogel layer such as Alg70-Gel30 and Alg50-Gel50.

One-step harvest and delivery of micropatterned cell sheets mimicking the multi-cellular microenvironment of vascularized tissue

Techniques for harvest and delivery of cell sheets have been improving for decades. However, cell sheets with complicated patterns closely related to natural tissue architecture were hardly achieved. Here, we developed an efficient method to culture and harvest cell sheets with complex shape (noted as microtissues) using temperature-responsive hydrogel consisting of expandable polyethylene oxide polymer at low temperature. Firstly, a temperature-responsive hydrogel surface with honeycomb patterns (50 and 100 µm in width) were developed through microcontact printing of polydopamine (PD). The human dermal fibroblasts (HDFBs) and human umbilical vein endothelial cells (HUVECs) spontaneously formed honeycomb-shaped microtissues on the patterned hydrogel surface. The microtissues on the hydrogel were able to be harvested and directly delivered to the desired target through thermal expansion of the hydrogel at 4 °C with an efficiency close to 80% within 10 min which is faster than conventional method based on poly(N-isopropylacrylamide). The microtissues maintained their original honeycomb network and intact structures. Honeycomb-patterned cell sheets also were fabricated through serial seeding of various cell lines, including HDFBs, HUVECs, and human adipose-derived stem cells, in which cells were attached along the honeycomb pattern. The underlying honeycomb patterns in the cell sheets were successfully maintained for 3 days, even after delivery. In addition, patterned cell sheets were successfully delivered in vivo while maintaining an intact structure for 7 days. Together, our findings demonstrate that micropatterned temperature-responsive hydrogel is an efficient method of one-step culturing and delivery of complex microtissues and should prove useful in various tissue engineering applications. STATEMENT OF SIGNIFICANCE: Scaffold-free cell delivery techniques, including cell sheet engineering, have been developed for decades. However, there is limited research regarding culture and delivery of microtissues with complex architecture mimicking natural tissue. Herein, we developed a micro-patterned hydrogel platform for the culture and delivery of honeycomb-shaped microtissues. Honeycomb patterns were chemically engineered on the temperature-responsive hydrogel through microcontact printing of polydopamine to selectively allow for human dermal fibroblast or human umbilical vein endothelial cell adhesion. They spontaneously formed honeycomb-shaped microtissues within 24 hr upon cell seeding and directly delivered to various target area including in vivo via thermal expansion of the hydrogel at 4 °C, suggesting that the micro-patterned hydrogel can be an efficient tool for culture and delivery of complex microtissue.

Rapid Biocidal Activity of N-Halamine-Functionalized Polydopamine and Polyethylene Imine Coatings

Microorganisms easily adhere to the surface of substrates and further form biofilms, which present problems in various fields. Therefore, the development of surfaces with antimicrobial adhesion or viability is a promising approach. In this study, we were committed to develop a rapid sterilizing coating. First, polyester fibers were immersed into a mixing solution of dopamine (PDA) and polyethyleneimine (PEI) for forming the co-deposition of PDA and PEI coatings. After this, the co-deposition of PDA and PEI coatings was immersed in a solution of household bleach for chlorination. We found that the nitrogens of PDA and PEI could be chlorinated repeatedly and that the oxidative chlorine content increased with the increasing PEI concentration upon co-deposition. Next, the efficacy of the co-deposition of chlorinated PDA and PEI coatings in eliminating Staphylococcus aureus and Escherichia coli was investigated. We found that the antibacterial ability of the coatings increased with increasing PEI content. In addition, the chlorinated co-deposition coatings had significantly improved antibacterial properties compared to the unchlorinated ones. The chlorinated co-deposition coatings inactivated >99.99% of S. aureus and >99.9% of E. coli after contact of less than 10 min. Therefore, chlorination of a PDA/PEI co-deposition surface is a feasible method for use in antibacterial coatings.

Human small intestine cancer cell membrane-camouflaged quercetin-melanin for antibacterial and antitumor activity

E. coli has become an important factor that can lead to cancer because of its ability to cause diverse intestinal changes. Nano-polymer materials provide ideal drug delivery systems for preparing antibacterial and anti-cancer drugs because of their unique structure, easy modification, and high drug loading. The modified natural melanin has the potential to be an excellent nano-carrier. By improving the water-solubility and biocompatibility of the loaded natural drug quercetin, the antibacterial effect of quercetin can be fully played. Here, natural melanin was extracted from frozen squid to synthesize carrier polydopamine (PDA) nanoparticles, and the natural drug quercetin (Q) was modified on the surface of PDA by π-π bond and covalent bond action to produce melanin-quercetin (PDA-Q). We also developed human small intestinal cancer cells (HIC) membrane-camouflaged melanin-Quercetin (PDA-Q) nanoparticles as an anti-cancer platform in vivo. The potential bacteriostatic mechanism was likely driven by the penetration of PDA-Q in E. coli cells, damaging the integrity of the membranes of E. coli and inducing cell death. The mice wound experiment and bacteremia model experiment revealed that C@PDA-Q had a strong inhibitory effect on E. coli in vivo. In addition, the results of the in vitro tumor test also revealed that C@PDA-Q had strong anti-tumor activity against HIC cells of human small intestinal cancer, and the IC50 value was 12.3 ± 0.7 μg/ml, which was slightly better than that for cisplatin. As both melanin nanoparticles and HIC membrane are natural biomaterials, the synthesized C@PDA-Q nano-polymer material shows great potential for use in anti-cancer nano-drug loading.

Conjugation of Polysulfobetaine via Poly(pyrogallol) Coatings for Improving the Antifouling Efficacy of Biomaterials

Antifouling treatment is critical to certain biomedical devices for their functions and patients' life. Facial, versatile, and universal coating methods to conjugate antifouling materials on a wide variety of biomaterials are beneficial for the fabrication of low-fouling biomedical devices. We developed a simple one-step coating method for surface conjugation of zwitterionic poly(sulfobetaine) via deposition of self-polymerized pyrogallol (PG). Poly(pyrogallol) could deposit copolymers of sulfobetaine methacrylate and aminoethyl methacrylate (pSBAE) on various biomaterials. pSBAE coatings inhibited as high as 99.8% of the adhesion of L929 cells and reduced protein adsorption significantly. The resistance against L929 cell adhesion was increased with increasing coating time and was positively correlated with the surface hydrophilicity and film thickness. Such a coating was robust to resist harsh sterilization conditions and stable for long-term storage in phosphate-buffered saline. We expect that the simple low-fouling pSBAE coating is applicable to the manufacture of medical devices.

Catecholamine-Copper Redox as a Basis for Site-Specific Single-Step Functionalization of Material Surfaces

Realization of robust and facile surface functionalization processes is critical to biomaterials and biotechnology yet remains a challenge. Here, we report a new chemical approach that enables operationally simple and site-specific surface functionalization. The mechanism involves a catechol-copper redox chemistry, where the oxidative polymerization of an alkynyl catecholamine reduces Cu(II) to Cu(I), which in situ catalyzes a click reaction with azide-containing molecules of interest (MOIs). This process enables drop-coating and grafting of two- and three-dimensional solid surfaces in a single operation using as small as sub-microliter volumes. Generalizability of the method is shown for immobilizing MOIs of diverse structure and chemical or biological activity. Biological applications in anti-biofouling, cellular adhesion, scaffold seeding, and tissue regeneration are demonstrated, in which the activities or fates of cells are site-specifically manipulated. This work advances surface chemistry by integrating simplicity and precision with multipurpose surface functionalization.

Phospholipid-based multifunctional coating via layer-by-layer self-assembly for biomedical applications

As an important class of biomaterials，bionics inspired materials has been widely used in creating extracorporeal and implantable medical devices. However, specific service environment is often faced with multiple requirements rather than single function. Herein, we designed a phospholipid-based multifunctional coating with phospholipids-based polymers, type I collagen (Col-I) and Arg-Glu-Asp-Val (REDV) peptide, via layer-by-layer assembly. The successful synthesis of the polymers and the coating is proved by a series of characterization methods including Fourier transforming infrared spectra (FTIR), proton nuclear magnetic resonance (¹H NMR), ultraviolet-visible spectra (UV) and X-ray photoelectron spectroscopy (XPS), while the assembly process and quality change of the coating were monitored via quartz crystal microbalance (QCM). Besides, hydrophilicity and roughness of this coating was analyzed via water contact angle (WCA) and atomic force microscope (AFM), respectively. Finally, results from platelet adhesion, activation assay, smooth muscle cells (SMCs) and endothelial cells (ECs) cultures indicated that the multifunctional coating could strongly inhibit platelet adhesion and SMCs proliferation, hence provide practical application of the coating with good biocompatibility, especially the anticoagulant property and cell compatibility. It is expected that this coating may be used in blood-contacting fields such as cardiovascular stent or other devices in the future.

Aminomalononitrile-Assisted Multifunctional Antibacterial Coatings

Medical device associated infections remain a significant problem for all classes of devices at this point in time. Here, we have developed a surface modification technique to fabricate multifunctional coatings that combine antifouling and antimicrobial properties. Zwitterionic polymers providing antifouling properties and quaternary ammonium containing polymers providing antimicrobial properties were combined in these coatings. Throughout this study, aminomalononitrile (AMN) was used to achieve one-step coatings incorporating different polymers. The characterization of coatings was carried out using static water contact angle (WCA) measurements, X-ray photoelectron spectroscopy (XPS), profilometry, and scanning electron microscopy (SEM), whereas the biological response in vitro was analyzed using Staphylococcus epidermidis and Escherichia coli as well as L929 fibroblast cells. Zwitterionic polymers synthesized from sulfobetaine methacrylate and 2-aminoethyl methacrylate were demonstrated to reduce bacterial attachment when incorporated in AMN assisted coatings. However, bacteria in suspension were not affected by this approach. On the other hand, alkylated polyethylenimine polymers, synthesized to provide quaternary ammonium groups, were demonstrated to have contact killing properties when incorporated in AMN assisted coatings. However, the high bacterial attachment observed on these surfaces may be detrimental in applications requiring longer-term bactericidal activity. Therefore, AMN-assisted coatings containing both quaternary and zwitterionic polymers were fabricated. These multifunctional coatings were demonstrated to significantly reduce the number of live bacteria not only on the modified surfaces, but also in suspension. This approach is expected to be of interest in a range of biomedical device applications.

From Bioinspired Glue to Medicine: Polydopamine as a Biomedical Material

Biological structures have emerged through millennia of evolution, and nature has fine-tuned the material properties in order to optimise the structure-function relationship. Following this paradigm, polydopamine (PDA), which was found to be crucial for the adhesion of mussels to wet surfaces, was hence initially introduced as a coating substance to increase the chemical reactivity and surface adhesion properties. Structurally, polydopamine is very similar to melanin, which is a pigment of human skin responsible for the protection of underlying skin layers by efficiently absorbing light with potentially harmful wavelengths. Recent findings have shown the subsequent release of the energy (in the form of heat) upon light excitation, presenting it as an ideal candidate for photothermal applications. Thus, polydopamine can both be used to (i) coat nanoparticle surfaces and to (ii) form capsules and ultra-small (nano)particles/nanocomposites while retaining bulk characteristics (i.e., biocompatibility, stability under UV irradiation, heat conversion, and activity during photoacoustic imaging). Due to the aforementioned properties, polydopamine-based materials have since been tested in adhesive and in energy-related as well as in a range of medical applications such as for tumour ablation, imaging, and drug delivery. In this review, we focus upon how different forms of the material can be synthesised and the use of polydopamine in biological and biomedical applications.

Polydopamine-based surface modification of hemoglobin particles for stability enhancement of oxygen carriers

Templated assembly techniques have been extensively used to develop various types of hemoglobin (Hb) loaded particles with improved performance. However, several instability issues must still be solved, including Hb exposure, enhanced Hb auto-oxidation, and the relatively weak binding of Hb to cross-linkers. Herein, to meet the stability requirements for novel hemoglobin-based oxygen carriers (HBOCs), hemoglobin-polydopamine particles (Hb-PDA) were fabricated using a mild process that combines the co-precipitation of Hb and an inorganic template with the spontaneous adhesion of PDA. The Hb-PDA showed uniform size distribution, chemical integrity of both Hb and PDA, high biocompatibility, and robust oxygen delivery. Our results demonstrated that the use of polydopamine as a biocompatible coating material reduced Hb leakage from the particles under both static and flow conditions, thus mitigating the toxicity associated with free Hb and strengthening the stability of Hb particles. In addition, Hb-PDA reduced HUVEC (Human Umbilical Vein Cells) oxidative injury and scavenged 85% of the available hydroxyl radicals, exhibiting its potential to act as an antioxidant for encapsulated Hb. Hb-PDA therefore shows significant promise as a cell-like structurally and functionally stable HBOCs.

The immobilization of antibiotic-loaded polymeric coatings on osteoarticular Ti implants for the prevention of bone infections

Implant-associated infections in orthopaedic surgeries are very critical as they may hinder bone healing, cause implant failure and even progress to osteomyelitis. Drug-eluting implants for local delivery of antibiotics at surgical sites are thought to be promising in preventing infections. Herein, the antibiotic vancomycin was encapsulated in a poly(ethylene glycol) (PEG)-based hydrogel film that was covalently bound to Ti implants and subsequently covered by a PEG-poly(lactic-co-caprolactone) (PEG-PLC) membrane. Additionally, crosslinked starch (CSt) was mixed with the hydrogel because its porous microstructure is able to inhibit hydrogel swelling and thus slow down drug release. The release behavior could be regulated by the drug loading and the coating thickness. The vancomycin-loaded Ti implants showed no initial burst release, offering a sustained drug release for nearly 3 weeks in vitro and more than 4 weeks in vivo. In a rabbit model of S. aureus infection, the implants with a 4 mg vancomycin loading significantly reduced the inflammatory reaction and exhibited a good antimicrobial capability. The immobilization of the antibiotic-loaded polymeric coatings on orthopaedic implants can offer a sustainable drug release with no initial burst release and maintain an effective concentration for a longer time, so it is expected to be an effective strategy to treat and prevent local bone infections.

Dopamine-assisted co-deposition: An emerging and promising strategy for surface modification

Mussel-inspired chemistry based on polydopamine (PDA) deposition has been developed as a facile and universal method for the surface modification of various materials. However, the inherent shortcomings of PDA coatings still impede their practical applications in the development of functional materials. In this review, we introduce the recent progress in the emerging dopamine-assisted co-deposition as a one-step strategy for functionalizing PDA-based coatings, and improving them in the aspects of deposition rate, morphology uniformity, surface wettability and chemical stability. The co-deposition mechanisms are categorized and discussed according to the interactions of dopamine or PDA with the introduced co-component. We also emphasize the influence of these interactions on the properties of the resultant PDA-based coatings. Meanwhile, we conclude the representative potential applications of those dopamine-assisted co-deposited coatings in material science, especially including separation membranes and biomaterials. Finally, some important issues and perspectives for theoretical study and applications are briefly discussed.

Dopamine-assisted fixation of drug-loaded polymeric multilayers to osteoarticular implants for tuberculosis therapy

Currently, the major issues in the treatment of osteoarticular tuberculosis (TB) after implant placement are low drug concentration at the infected focus and drug resistance resulting from the long-term chemotherapy. The application of drug-loaded polymeric multilayers on implantable devices offers a promising solution to the problems. Herein, a poly(ethylene glycol)-based hydrogel film embedded with isoniazid (INH)-loaded alginate microparticles was fixed to Ti implants via adhesive polydopamine, subsequently capped by poly(lactic-co-glycolic acid) membranes for the sustained and localized delivery of the anti-TB drug. The antibacterial efficacy of the released INH was confirmed by a 4.5 ± 0.8 cm inhibition zone formed in the fourth week after inoculation of Mycobacterium tuberculosis. The INH-loaded Ti implants showed no toxicity to the osteoblast cell and provided a consistent drug release for nearly one week in vitro. The release profile in vivo showed a high local concentration and low systemic exposure. The local INH concentration could be kept higher than its minimum inhibitory concentration over a period of 8 weeks, which proves that it is a promising strategy to improve the severe osteoarticular TB treatment.

Polydopamine Surface Chemistry: A Decade of Discovery

Polydopamine is one of the simplest and most versatile approaches to functionalizing material surfaces, having been inspired by the adhesive nature of catechols and amines in mussel adhesive proteins. Since its first report in 2007, a decade of studies on polydopamine molecular structure, deposition conditions, and physicochemical properties have ensued. During this time, potential uses of polydopamine coatings have expanded in many unforeseen directions, seemingly only limited by the creativity of researchers seeking simple solutions to manipulating surface chemistry. In this review, we describe the current state of the art in polydopamine coating methods, describe efforts underway to uncover and tailor the complex structure and chemical properties of polydopamine, and identify emerging trends and needs in polydopamine research, including the use of dopamine analogs, nitrogen-free polyphenolic precursors, and improvement of coating mechanical properties.

Simple Coatings to Render Polystyrene Protein Resistant

Non-specific protein adsorption is detrimental to the performance of many biomedical devices. Polystyrene is a commonly used material in devices and thin films. Simple reliable surface modification of polystyrene to render it protein resistant is desired in particular for device fabrication and orthogonal functionalisation schemes. This report details modifications carried out on a polystyrene surface to prevent protein adsorption. The trialed surfaces included Pluronic F127 and PLL-g-PEG, adsorbed on polystyrene, using a polydopamine-assisted approach. Quartz crystal microbalance with dissipation (QCM-D) results showed only short-term anti-fouling success of the polystyrene surface modified with F127, and the subsequent failure of the polydopamine intermediary layer in improving its stability. In stark contrast, QCM-D analysis proved the success of the polydopamine assisted PLL-g-PEG coating in preventing bovine serum albumin adsorption. This modified surface is equally as protein-rejecting after 24 h in buffer, and thus a promising simple coating for long term protein rejection of polystyrene.

Polydopamine–polyethylene glycol–albumin antifouling coatings on multiple substrates

Polydopamine–PEG coatings on different substrates: effects of PDA layer properties on PEG grafting and anti-biofouling properties.

Amyloid-like protein nanofibrous membranes as a sensing layer infrastructure for the design of mass-sensitive biosensors

Quartz crystal microbalances (QCMs) have been used in the literature for mass sensitive biosensor applications. However, their performance, reliability and stability have been limited by the chemical treatment steps required for the functionalization and activation of the QCM surface, prior to antibody immobilization. Specifically, these steps cause increased film thickness, which diminishes performance by mass overload, and create a harsh environment, which reduces biological activity. In this work, we eliminated this chemical step by introducing a sensing layer modification using electrospun amyloid like-bovine serum albumin (AL-BSA) nanofibers on QCM surfaces. Owing to the self-functionality of AL-BSA nanofibers, these modified QCM surfaces were directly activated by glutaraldehyde (GA). To assess the performance of these modified electrodes, a model protein, lysozyme (Lys), was selected as the biological agent to be immobilized. Frequency measurements were performed in batch (dip-and-dry) and continuous (flow-cell) processes, and binding performances were compared. AL-BSA modified surfaces were characterized by X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM), quartz crystal microbalance (QCM), contact angle (CA) and attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR). Protein detection was measured based on the frequency shift before and after the covalent bonding of Lys. Under optimized conditions, the proposed immobilization platforms could bind 335ng/mL and 250ng/mL of Lys for batch and continuous processes, respectively. Our results demonstrate the potential usage of these self-functional electrospun AL-BSA infrastructure sensing layers on QCM surfaces. This modification enables the direct immobilization of bioactive agents by eliminating any surface functionalization process for further mass-sensitive biosensor applications.

Low-fouling and functional poly(carboxybetaine) coating via a photo-crosslinking process

Antifouling modification technology is developed for many biomedical applications such as blood-contact devices and biosensors.

Polydopamine-Assisted Surface Modification for Bone Biosubstitutes

Polydopamine (PDA) prepared in the form of a layer of polymerized dopamine (DA) in a weak alkaline solution has been used as a versatile biomimetic surface modifier as well as a broadly used immobilizing macromolecule. This review mainly discusses the progress of biomaterial surface modification inspired by the participation of PDA in bone tissue engineering. A comparison between PDA-assisted coating techniques and traditional surface modification applied to bone tissue engineering is first presented. Secondly, the chemical composition and the underlying formation mechanism of PDA coating layer as a unique surface modifier are interpreted and discussed. Furthermore, several typical examples are provided to evidence the importance of PDA-assisted coating techniques in the construction of bone biosubstitutes and the improvement of material biocompatibility. Nowadays, the application of PDA as a superior surface modifier in multifunctional biomaterials is drawing tremendous interests in bone tissue scaffolds to promote the osteointegration for bone regeneration.

Mussel-inspired alginate gel promoting the osteogenic differentiation of mesenchymal stem cells and anti-infection

Alginate hydrogels have been used in cell encapsulation for many years but a prevalent issue with pure alginates is that they are unable to provide enough bioactive properties to interact with mammalian cells. This paper discusses the modification of alginate with mussel-inspired dopamine for cell loading and anti-infection. Mouse bone marrow stem cells were immobilized into alginate and alginate-dopamine beads and fibers. Through live-dead and MTT assay, alginates modified by dopamine promoted cell viability and proliferation. In vitro cell differentiation results showed that such an alginate-dopamine gel can promote the osteogenic differentiation of mesenchymal stem cell after PCR and ALP assays. In addition to that, the adhesive prosperities of dopamine allowed for coating the surface of alginate-dopamine gel with silver nanoparticles, which provided the gel with significant antibacterial characteristics. Overall, these results demonstrate that a dopamine-modified alginate gel can be a great tool for cell encapsulation to promote cell proliferation and can be applied to bone regeneration, especially in contaminated bone defects.

The effect of guanidinium functionalization on the structural properties and anion affinity of polyelectrolyte multilayers

Poly(allylamine hydrochloride) (PAH) is chemically functionalized with guanidinium (Gu) moieties in water at room temperature. The resulting PAH-Gu is used to prepare polyelectrolyte multilayers (PEMs) with poly(sodium 4-styrene sulfonate) (PSS) via layer-by-layer deposition. The polyelectrolyte (PE) adsorption processes are monitored real-time by optical reflectometry and a quartz crystal microbalance with dissipation monitoring (QCM-D). Compared to the reference PSS/PAH PEMs, the PSS/PAH-Gu PEMs show a lower amount of deposited PE materials, lower wet thickness, higher stability under alkaline conditions and higher rigidity. These differences are rationalized by the additional Gu-SO3(-) interactions, also affecting the conformation of the PE chains in the PEM. The interactions between the PEMs and various sodium salts (NaCl, NaNO3, Na2SO4 and NaH2PO4) are also monitored using QCM-D. From the changes in the frequency, dissipation responses and supportive Reflection Absorption Infrared Spectroscopy it is concluded that Gu-functionalized PEMs absorb more H2PO4(-) compared to the Gu-free reference PEMs. This can be understood by strong interactions between Gu and H2PO4(-), the differences in the anion hydration energy and the anion valency. It is anticipated that compounds like the presented Gu-functionalized PE may facilitate the further development of H2PO4(-) sensors and ion separation/recovery systems.

Nanoscale graphene coating on commercially pure titanium for accelerated bone regeneration

Nanoscale coating of reduced graphene oxide (RGO) on commercially pure titanium (CP-Ti) resulted in accelerated bone regeneration in the calvarial bone defect of rats.

Fabrication of biocompatible nanohybrid shish-kebab-structured carbon nanotubes with a mussel-inspired layer

The first report investigating the biocompatibility of the (polydopamine coated) carbon nanotubes/polymer nanohybrid shish-kebab structure for tissue engineering.

Recent developments in poly(dopamine)-based coatings for biomedical applications

The success of polymer coatings for biomedical applications is undeniable. Among the very successful examples are poly(dopamine) (PDA) films due to their simplicity in deposition and beneficial interaction with biomolecules and cells. The aim of this review is to highlight the findings and achievement of PDA in nanomedicine since 2011. We discuss the progress that has been made to elucidate the structure of PDA and novel aspects considering the assembly of PDA-based films on diverse substrates. We highlight the newest results considering the biological evaluation PDA-based coatings to control cell behavior and the use of PDA in biosensing. The popularity of PDA remains unchanged, but the research efforts start to be consolidated toward more specific aims and clinical applications.

Mixed poly(dopamine)/poly(L-lysine) (composite) coatings: from assembly to interaction with endothelial cells

Engineered polymer films are of significant importance in the field of biomedicine. Poly(dopamine) (PDA) is becoming more and more a key player in this context. Herein, we deposited mixed films consisting of PDA and poly(L-lysine) (PLL) of different molecular weights. The coatings were characterized by quartz crystal microbalance with dissipation monitoring, atomic force microscopy, and X-ray photoelectron spectroscopy. The protein adsorption to the mixed films was found to decrease with increasing amounts of PLL. PDA/PLL capsules were also successfully assembled. Higher PLL content in the membranes reduced their thickness while the ζ-potential increased. Further, endothelial cell adhesion and proliferation over 96 h were found to be independent of the type of coating. Using PDA/PLL in liposome-containing composite coatings showed that sequential deposition of the layers yielded higher liposome trapping compared to one-step adsorption except for negatively charged liposomes. Association/uptake of fluorescent cargo by adherent endothelial cells was found to be different for PDA and PDA/PLL films. Taken together, our findings illustrate the potential of PDA/PLL mixed films as coatings for biomedical applications.

Improving osteointegration and osteogenesis of three-dimensional porous Ti6Al4V scaffolds by polydopamine-assisted biomimetic hydroxyapatite coating

Titanium alloys with various porous structures can be fabricated by advanced additive manufacturing techniques, which are attractive for use as scaffolds for bone defect repair. However, modification of the scaffold surfaces, particularly inner surfaces, is critical to improve the osteointegration of these scaffolds. In this study, a biomimetic approach was employed to construct polydopamine-assisted hydroxyapatite coating (HA/pDA) onto porous Ti6Al4V scaffolds fabricated by the electron beam melting method. The surface modification was characterized with the field emission scanning electron microscopy, energy dispersive spectroscopy, water contact angle measurement, and confocal laser scanning microscopy. Attachment and proliferation of MC3T3-E1 cells on the scaffold surface were significantly enhanced by the HA/pDA coating compared to the unmodified surfaces. Additionally, MC3T3-E1 cells grown on the HA/pDA-coated Ti6Al4V scaffolds displayed significantly higher expression of runt-related transcription factor-2, alkaline phosphatase, osteocalcin, osteopontin, and collagen type-1 compared with bare Ti6Al4V scaffolds after culture for 14 days. Moreover, microcomputed tomography analysis and Van-Gieson staining of histological sections showed that HA/pDA coating on surfaces of porous Ti6Al4V scaffolds enhanced osteointegration and significantly promoted bone regeneration after implantation in rabbit femoral condylar defects for 4 and 12 weeks. Therefore, this study provides an alternative to biofunctionalized porous Ti6Al4V scaffolds with improved osteointegration and osteogenesis functions for orthopedic applications.

Pseudopeptide polymer coating for improving biocompatibility and corrosion resistance of 316L stainless steel

The coating formed by electrochemical assembly of hydrolyzed poly(2-methyl-2-oxazoline) and dopamine could improve the migration and proliferation of HUVECs.

Substrate independent coating formation and anti-biofouling performance improvement of mussel inspired polydopamine

Anti-biofouling performance of mussel inspired polydopamine coating can be improved significantly by simple coordination, oxidation, heating or grafting treatment.

Polydopamine-assisted deposition of heparin for selective adsorption of low-density lipoprotein

Low-density lipoprotein (LDL) is the main carrier of blood cholesterol, with elevated levels of LDL increasing the risk of atherosclerosis.

Sticky tubes and magnetic hydrogels co-assembled by a short peptide and melanin-like nanoparticles

The co-assembly of peptide monomers and polydopamine-based nanoparticles leads to the formation of either tubular structures decorated with adhesive particles or magnetic hydrogel.