Interactions of U937 macrophage-like cells with decellularized pericardial matrix materials: influence of crosslinking treatment

Comparison of Bovine- and Porcine-Derived Decellularized Biomaterials: Promising Platforms for Tissue Engineering Applications

Animal-derived xenogeneic biomaterials utilized in different surgeries are promising for various applications in tissue engineering. However, tissue decellularization is necessary to attain a bioactive extracellular matrix (ECM) that can be safely transplanted. The main objective of the present study is to assess the structural integrity, biocompatibility, and potential use of various acellular biomaterials for tissue engineering applications. Hence, a bovine pericardium (BP), porcine pericardium (PP), and porcine tunica vaginalis (PTV) were decellularized using a Trypsin, Triton X (TX), and sodium dodecyl sulfate (SDS) (Trypsin + TX + SDS) protocol. The results reveal effective elimination of the cellular antigens with preservation of the ECM integrity confirmed via staining and electron microscopy. The elasticity of the decellularized PP (DPP) was markedly (p < 0.0001) increased. The tensile strength of DBP, and DPP was not affected after decellularization. All decellularized tissues were biocompatible with persistent growth of the adipose stem cells over 30 days. The staining confirmed cell adherence either to the peripheries of the materials or within their matrices. Moreover, the in vivo investigation confirmed the biocompatibility and degradability of the decellularized scaffolds. Conclusively, Trypsin + TX + SDS is a successful new protocol for tissue decellularization. Moreover, decellularized pericardia and tunica vaginalis are promising scaffolds for the engineering of different tissues with higher potential for the use of DPP in cardiovascular applications and DBP and DPTV in the reconstruction of higher-stress-bearing abdominal walls.

A comparative in vitro and in vivo study of porcine- and bovine-derived non-cross-linked collagen membranes

The porcine-derived non-cross-linked collagen membrane Bio-gide® (BG) and the bovine-derived non-cross-linked collagen membrane Heal-all® (HA) were compared to better understand their in vitro biophysical characteristics and in vivo degradation patterns as a reference for clinical applications. It was showed that the porosity, specific surface area, pore volume and pore diameter of BG were larger than those of HA (64.5 ± 5.2% vs. 48.6 ± 6.1%; 18.6 ± 2.8 m² /g vs. 2.3 ± 0.6 m² /g; 0.114 ± 0.002 cm³ /g vs. 0.003 ± 0.001 cm³ /g; 24.4 ± 3.5 nm vs. 7.3 ± 1.7 nm, respectively); the average swelling ratio of BG was higher than that of HA (412.6 ± 41.2% vs. 270.0 ± 2.7%); the tensile strength of both dry and wet HA was higher than those of BG (18.26 ± 3.27 MPa vs. 4.02 ± 1.35 MPa; 2.24 ± 0.21 MPa vs. 0.16 ± 0.02 MPa, respectively); 73% of HA remained after 72 h in collagenase solution, whereas only 8.2% of BG remained. A subcutaneous rat implantation model revealed that, at 3, 7, 14, 28, and 56 days postmembrane implantation, there were more total inflammatory cells, especially more M1 and M2 polarized macrophages and higher M2/M1 ratio in BG than in HA; in addition, the fibrous capsule around BG was also thicker than that around HA. Moreover, concentrations of dozens of cytokines including interleukin-2(IL-2), IL-7, IL-10 and so forth. in BG were higher than those in HA. It is suggested that BG and HA might be suitable for different clinical applications according to their different characteristics.

Rational Design of Immunomodulatory Hydrogels for Chronic Wound Healing

With all the advances in tissue engineering for construction of fully functional skin tissue, complete regeneration of chronic wounds is still challenging. Since immune reaction to the tissue damage is critical in regulating both the quality and duration of chronic wound healing cascade, strategies to modulate the immune system are of importance. Generally, in response to an injury, macrophages switch from pro-inflammatory to an anti-inflammatory phenotype. Therefore, controlling macrophages' polarization has become an appealing approach in regenerative medicine. Recently, hydrogels-based constructs, incorporated with various cellular and molecular signals, have been developed and utilized to adjust immune cell functions in various stages of wound healing. Here, the current state of knowledge on immune cell functions during skin tissue regeneration is first discussed. Recent advanced technologies used to design immunomodulatory hydrogels for controlling macrophages' polarization are then summarized. Rational design of hydrogels for providing controlled immune stimulation via hydrogel chemistry and surface modification, as well as incorporation of cell and molecules, are also dicussed. In addition, the effects of hydrogels' properties on immunogenic features and the wound healing process are summarized. Finally, future directions and upcoming research strategies to control immune responses during chronic wound healing are highlighted.

Decellularized scaffold and its elicited immune response towards the host: the underlying mechanism and means of immunomodulatory modification

The immune response of the host towards a decellularized scaffold is complex. Not only can a number of immune cells influence this process, but also the characteristics, preparation and modification of the decellularized scaffold can significantly impact this reaction. Such factors can, together or alone, trigger immune cells to polarize towards either a pro-healing or pro-inflammatory direction. In this article, we have comprehensively reviewed factors which may influence the immune response of the host towards a decellularized scaffold, including the source of the biomaterial, biophysical properties or modifications of the scaffolds with bioactive peptides, drugs and cytokines. Furthermore, the underlying mechanism has also been recapitulated.

Renal Regeneration: The Role of Extracellular Matrix and Current ECM-Based Tissue Engineered Strategies

Natural extracellular matrices (ECM) are currently being studied as an alternative source for organ transplantation or as new solutions to treat kidney injuries, which can evolve to end-stage renal disease, a life devastating condition. This paper provides an overview on the current knowledge in kidney ECM and its usefulness on future investigations. The composition and structure of kidney ECM is herein associated with its intrinsic capacity of remodeling and repair after insult. Moreover, it provides a deeper insight on altered ECM components during disease. The use of decellularized kidney matrices is discussed in the second part of the review, with emphasis on how these matrices contribute to tissue-specific differentiation of embryonic, pluripotent, and other stem cells. The evolution on the field toward different uses of xenogeneic ECM as a biological scaffold material is discussed, namely the major outcomes on whole kidney recellularization and its in vivo implantation. At last, the recent literature on the use of processed kidney decellularized ECM to produce diverse biomaterial substrates, such as hydrogels, membranes, and bioinks are reviewed, with emphasis on future perspectives of its translation into the clinic.

Decellularized xenografts in regenerative medicine: From processing to clinical application

Decellularized xenografts are an inherent component of regenerative medicine. Their preserved structure, mechanical integrity and biofunctional composition have well established them in reparative medicine for a diverse range of clinical indications. Nonetheless, their performance is highly influenced by their source (ie species, age, tissue) and processing (ie decellularization, crosslinking, sterilization and preservation), which govern their final characteristics and determine their success or failure for a specific clinical target. In this review, we provide an overview of the different sources and processing methods used in decellularized xenografts fabrication and discuss their effect on the clinical performance of commercially available decellularized xenografts.

Sterilization and disinfection methods for decellularized matrix materials: Review, consideration and proposal

Sterilization is the process of killing all microorganisms, while disinfection is the process of killing or removing all kinds of pathogenic microorganisms except bacterial spores. Biomaterials involved in cell experiments, animal experiments, and clinical applications need to be in the aseptic state, but their physical and chemical properties as well as biological activities can be affected by sterilization or disinfection. Decellularized matrix (dECM) is the low immunogenicity material obtained by removing cells from tissues, which retains many inherent components in tissues such as proteins and proteoglycans. But there are few studies concerning the effects of sterilization or disinfection on dECM, and the systematic introduction of sterilization or disinfection for dECM is even less. Therefore, this review systematically introduces and analyzes the mechanism, advantages, disadvantages, and applications of various sterilization and disinfection methods, discusses the factors influencing the selection of sterilization and disinfection methods, summarizes the sterilization and disinfection methods for various common dECM, and finally proposes a graphical route for selecting an appropriate sterilization or disinfection method for dECM and a technical route for validating the selected method, so as to provide the reference and basis for choosing more appropriate sterilization or disinfection methods of various dECM.

•

Asepsis is the prerequisite for the experiment and application of biomaterials.

•

Sterilization or disinfection affects physic-chemical properties of biomaterials.

•

Mechanism, advantages and disadvantages of sterilization or disinfection methods.

•

Factors influencing the selection of sterilization or disinfection methods.

•

Selection of sterilization or disinfection methods for decellularized matrix.

Lactoferrin coated or conjugated nanomaterials as an active targeting approach in nanomedicine

A successful drug delivery to a specific site relies on two essential factors including; efficient entrapment of the drug within the carrier and successful delivery of drug- loaded nanocarrier to the target site without opsonisation or drug release in the circulation before reaching the organ of interest. Lactoferrin (LF) is a glycoprotein belonging to the transferrin (TF) family which can bind to TF receptors (TFRs) and LF membrane internalization receptors (LFRs) highly expressed on the cell surface of both highly proliferating cancer cells and blood brain barrier (BBB), which in turn can facilitate its accessibility to the cell nucleus. This merit could be exploited to develop actively targeted drug delivery systems that can easily cross the BBB or internalize into tumor cells. In this review, the most recent advances of utilizing LF as an active targeting ligand for different types of nanocarriers including: inorganic nanoparticles, dendrimers, synthetic biodegradable polymers, lipid nanocarriers, natural polymers, and nanoemulstions will be highlighted. Collectively, LF seems to be a promising targeting ligand in the field of nanomedicine.

Crosstalk Between Cardiac Cells and Macrophages Postmyocardial Infarction: Insights from In Vitro Studies

Cardiovascular disease, including myocardial infarction (MI), is the leading cause of death in the western world. Following MI, a large number of cardiomyocytes are lost and inflammatory cells such as monocytes and macrophages migrate into the damaged region to remove dead cells and tissue. These inflammatory cells secrete growth factors to induce degradation of the extracellular matrix in the myocardium and recruit cardiac fibroblasts. However, the contribution of specific macrophage subsets on cardiac cell function and survival in the steady state as well as in the diseased state is not well known. There is an increasing demand for in vitro cardiac disease models to bridge the critical missing link in the existing experimental methods. In this review, studies using in vitro models to examine the interaction between macrophages and cardiac cells, including cardiomyocytes, endothelial cells, and fibroblasts, are summarized to better understand the complex inflammatory cascade post-MI. The current challenges and the future directions of in vitro cardiac models are also discussed. Detailed and more mechanistic insights into macrophages and cardiac cell interactions during the multiphase repair process could potentially revolutionize the development of treatments and diagnostic alternatives. Impact statement The inflammatory cascade postmyocardial infarction (MI) is very complex. In vitro cardiac disease model studies bridge the critical missing link in the existing experimental methods and provide insights, including multicellular interaction post-MI. Detailed and more mechanistic insights into macrophages and cardiac cell interactions during the multiphase repair process could potentially revolutionize in developing treatments and diagnostic alternatives.

Hierarchical biofabrication of biomimetic collagen-elastin vascular grafts with controllable properties via lyophilisation

This article describes the development of a hierarchical biofabrication technique suitable to create large but complex structures, such as vascular mimicking grafts, using facile lyophilisation technology amenable to multiple other biomaterial classes. The combination of three fabrication techniques together, namely solvent evaporation, lyophilisation, and crosslinking together allows highly tailorable structures from the microstructure up to the macrostructure, and with the ability to independently crosslink each layer it allows great flexibility to match desired native mechanical properties independently of the micro/macrostructure. We have demonstrated the flexibility of this biofabrication technique by independently optimising each of the layers to create a multi-layered arterial structure with tailored architectural and biophysical/biochemical properties using a collagen-elastin composite. Taken together, the facile biofabrication methodology developed has led to the development of a biomimetic bilayered scaffold suitable for use as a tissue engineered vascular graft (for haemodialysis access or peripheral/coronary bypass), or as an in vitro test platform to examine disease progression, pharmacological toxicity, or cardiovascular medical device testing. STATEMENT OF SIGNIFICANCE: The ability to grow large complex tissues such as blood vessels for transplantation is often hampered by the limitations of the selected biofabrication technique. Here, we sought to overcome some of the fabrication limitations for naturally occurring cardiovascular polymers (collagen/elastin) via a hierarchical approach to fabrication where each layer is built upon the previous. This approach enabled the flexibility to modify and tailor each layer's properties independently via control over polymer concentration, microstructure, and crosslinking. This simple approach facilitated us to fabricate multi-layered vascular grafts which were remodelled into high-density vascular tissue after 21-days. The fabrication approach could be translated to a myriad of other tissues while the engineered vascular graft could also be used as a test platform for drugs/medical devices or as a tissue engineering scaffold for vascular grafting for different indications.

Decellularized Extracellular Matrix-based Bioinks for Engineering Tissue- and Organ-specific Microenvironments

Biomaterials-based biofabrication methods have gained much attention in recent years. Among them, 3D cell printing is a pioneering technology to facilitate the recapitulation of unique features of complex human tissues and organs with high process flexibility and versatility. Bioinks, combinations of printable hydrogel and cells, can be utilized to create 3D cell-printed constructs. The bioactive cues of bioinks directly trigger cells to induce tissue morphogenesis. Among the various printable hydrogels, the tissue- and organ-specific decellularized extracellular matrix (dECM) can exert synergistic effects in supporting various cells at any component by facilitating specific physiological properties. In this review, we aim to discuss a new paradigm of dECM-based bioinks able to recapitulate the inherent microenvironmental niche in 3D cell-printed constructs. This review can serve as a toolbox for biomedical engineers who want to understand the beneficial characteristics of the dECM-based bioinks and a basic set of fundamental criteria for printing functional human tissues and organs.

Mammalian Pericardium-Based Bioprosthetic Materials in Xenotransplantation and Tissue Engineering

Bioprosthetic materials based on mammalian pericardium tissue are the gold standard in reconstructive surgery. Their application range covers repair of rectovaginal septum defects, abdominoplastics, urethroplasty, duraplastics, maxillofacial, ophthalmic, thoracic and cardiovascular reconstruction, etc. However, a number of factors contribute to the success of their integration into the host tissue including structural organization, mechanical strength, biocompatibility, immunogenicity, surface chemistry, and biodegradability. In order to improve the material's properties, various strategies are developed, such as decellularization, crosslinking, and detoxification. In this review, the existing issues and long-term achievements in the development of bioprosthetic materials based on the mammalian pericardium tissue, aimed at a wide-spectrum application in reconstructive surgery are analyzed. The basic technical approaches to preparation of biocompatible forms providing continuous functioning, optimization of biomechanical and functional properties, and clinical applicability are described.

Fabrication, characterization and cytocompatibility assessment of gelatin nanofibers coated with a polymer thin film by initiated chemical vapor deposition

The presence of various functional groups in the structure of gelatin nanofibers (GNFs) has made it a suitable candidate for biomedical applications, yet its fast dissolution in aqueous media has been a real challenge for years. In the present work, we propose an efficient procedure to improve the durability of the GNFs. The electrospun GNFs were coated with poly(ethylene glycol dimethacrylate) (pEGDMA) using initiated chemical vapor deposition (iCVD) as a completely dry polymerization method. Morphological and chemical analysis revealed that an ultrathin layer formed around nanofibers (iCVD-GNFs) which has covalently bonded to gelatin chains. Against the instant dissolution of GNFs, the in vitro biodegradability test showed the iCVD-GNFs, to a large extent, preserve their morphology after 14 days of immersion and did not lose its integrity even after 31 days. In vitro cell culture studies, also, revealed cytocompatibility of the iCVD-GNFs for human fibroblast cells (hFC), as well as higher cell proliferation on the iCVD-GNFs compared to control made from tissue culture plate (TCP). Furthermore, contact angle measurements indicated that the hydrophilic GNFs became hydrophobic after the iCVD, yet FE-SEM images of cell-seeded iCVD-GNFs showed satisfactory cell adhesion. Taken together, the proposed method paves a promising way for the production of water-resistant GNFs utilized in biomedical applications; for instance, tissue engineering scaffolds and wound dressings.

Method to decellularize the human chorion membrane

The human placenta is considered a biological waste, thus it is a great source of extracellular matrix (ECM) proteins. The human chorion membrane (HCM) is a membrane that composes the human placenta and is constituted by collagens type I, II, IV, V and VI, fibronectin and laminin. To the best of our knowledge, the potential of HCM alone is largely unexplored as a substrate to be used in tissue engineering and regenerative medicine. In this work, we describe, for the first time, the process and method to decellularize the chorion membrane alone. To verify the success of the decellularization protocol, the presence and distribution of cell nuclei and double-stranded DNA were quantified and analyzed by DAPI staining, PicoGreen and electrophoresis. After the decellularization protocol an ECM compact and handleably membrane is obtained, the decellularized human chorion membrane (dHCM).

Targeted protein delivery: carbodiimide crosslinking influences protein release from microparticles incorporated within collagen scaffolds

Tissue engineering response may be tailored via controlled, sustained release of active agents from protein-loaded degradable microparticles incorporated directly within three-dimensional (3D) ice-templated collagen scaffolds. However, the effects of covalent crosslinking during scaffold preparation on the availability and release of protein from the incorporated microparticles have not been explored. Here, we load 3D ice-templated collagen scaffolds with controlled additions of poly-(DL-lactide-co-glycolide) microparticles. We probe the effects of subsequent N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide hydrochloride crosslinking on protein release, using microparticles with different internal protein distributions. Fluorescein isothiocyanate labelled bovine serum albumin is used as a model protein drug. The scaffolds display a homogeneous microparticle distribution, and a reduction in pore size and percolation diameter with increased microparticle addition, although these values did not fall below those reported as necessary for cell invasion. The protein distribution within the microparticles, near the surface or more deeply located within the microparticles, was important in determining the release profile and effect of crosslinking, as the surface was affected by the carbodiimide crosslinking reaction applied to the scaffold. Crosslinking of microparticles with a high proportion of protein at the surface caused both a reduction and delay in protein release. Protein located within the bulk of the microparticles, was protected from the crosslinking reaction and no delay in the overall release profile was seen.

Extracellular Matrix-Based Strategies for Immunomodulatory Biomaterials Engineering

The extracellular matrix (ECM) is a complex and dynamic structural scaffold for cells within tissues and plays an important role in regulating cell function. Recently it has become appreciated that the ECM contains bioactive motifs that can directly modulate immune responses. This review describes strategies for engineering immunomodulatory biomaterials that utilize natural ECM-derived molecules and have the potential to harness the immune system for applications ranging from tissue regeneration to drug delivery. A top-down approach utilizes full-length ECM proteins, including collagen, fibrin, or hyaluronic acid-based materials, as well as matrices derived from decellularized tissue. These materials have the benefit of maintaining natural conformation and structure but are often heterogeneous and encumber precise control. By contrast, a bottom-up approach leverages immunomodulatory domains, such as Arg-Gly-Asp (RGD), matrix metalloproteinase (MMP)-sensitive peptides, or leukocyte-associated immunoglobulin-like receptor-1(LAIR-1) ligands, by incorporating them into synthetic materials. These materials have tunable control over immune cell functions and allow for combinatorial approaches. However, the synthetic approach lacks the full natural context of the original ECM protein. These two approaches provide a broad range of engineering techniques for immunomodulation through material interactions and hold the potential for the development of future therapeutic applications.

Biomaterials: Foreign Bodies or Tuners for the Immune Response?

The perspectives of regenerative medicine are still severely hampered by the host response to biomaterial implantation, despite the robustness of technologies that hold the promise to recover the functionality of damaged organs and tissues. In this scenario, the cellular and molecular events that decide on implant success and tissue regeneration are played at the interface between the foreign body and the host inflammation, determined by innate and adaptive immune responses. To avoid adverse events, rather than the use of inert scaffolds, current state of the art points to the use of immunomodulatory biomaterials and their knowledge-based use to reduce neutrophil activation, and optimize M1 to M2 macrophage polarization, Th1 to Th2 lymphocyte switch, and Treg induction. Despite the fact that the field is still evolving and much remains to be accomplished, recent research breakthroughs have provided a broader insight on the correct choice of biomaterial physicochemical modifications to tune the reaction of the host immune system to implanted biomaterial and to favor integration and healing.

Production and Characterization of Chemically Cross-Linked Collagen Scaffolds

Chemical cross-linking of collagen-based devices is used as a means of increasing the mechanical stability and control the degradation rate upon implantation. Herein, we describe techniques to produce cross-linked with glutaraldehyde (GTA; amine terminal cross-linker), 4-arm polyethylene glycol succinimidyl glutarate (4SP; amine terminal cross-linker), diphenyl phosphoryl azide (DPPA; carboxyl terminal cross-linker), and 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC; carboxyl terminal cross-linker) collagen films. In addition, we provide protocols to characterize the biophysical (swelling), biomechanical (tensile), and biological (metabolic activity, proliferation and viability using human dermal fibroblasts and THP-1 macrophages) properties of the cross-linked collagen scaffolds.

The Collagen Suprafamily: From Biosynthesis to Advanced Biomaterial Development

Collagen is the oldest and most abundant extracellular matrix protein that has found many applications in food, cosmetic, pharmaceutical, and biomedical industries. First, an overview of the family of collagens and their respective structures, conformation, and biosynthesis is provided. The advances and shortfalls of various collagen preparations (e.g., mammalian/marine extracted collagen, cell-produced collagens, recombinant collagens, and collagen-like peptides) and crosslinking technologies (e.g., chemical, physical, and biological) are then critically discussed. Subsequently, an array of structural, thermal, mechanical, biochemical, and biological assays is examined, which are developed to analyze and characterize collagenous structures. Lastly, a comprehensive review is provided on how advances in engineering, chemistry, and biology have enabled the development of bioactive, 3D structures (e.g., tissue grafts, biomaterials, cell-assembled tissue equivalents) that closely imitate native supramolecular assemblies and have the capacity to deliver in a localized and sustained manner viable cell populations and/or bioactive/therapeutic molecules. Clearly, collagens have a long history in both evolution and biotechnology and continue to offer both challenges and exciting opportunities in regenerative medicine as nature's biomaterial of choice.

Inflammatory responses and tissue reactions to wood-Based nanocellulose scaffolds

Two wood-derived cellulose nanofibril (CNF) porous scaffolds were prepared by TEMPO-oxidation and carboxymethylation. The effects of these scaffolds on the production of inflammatory cytokines by human macrophage-like cells (U937) was profiled in vitro after 1 and 3 days and in subcutaneous tissues of rats after 4 and 30 days, using PCR and Multiplex arrays. Tissue culture plates (TCP) and gelatin scaffolds served as controls in vitro and in vivo respectively. After 3 days in vitro, there was no significant difference between the effects of CNF scaffolds and TCP on the production of chemokines/growth factors and pro-inflammatory cytokines. At day 4 in vivo there was significantly higher gene expression of the anti-inflammatory IL-1Ra in the CNF scaffolds than the gelatin scaffold. Production of IL-1β, IL-6, MCP-1, MIP-1α CXCL-1 and M-CSF was significantly less than in the gelatin, demonstrating an early mild inflammatory response. At day 30, both CNF scaffolds significantly stimulated the production of the anti-inflammatory cytokine IL-10. Unlike gelatin, neither CNF scaffold had degraded 180 days post-implantation. The slow degradation of CNF scaffolds resulted in a foreign body reaction, with high production of IL-1β, IL-2, TNF-α, IFN-ϒ, MCP-1, MIP-1α, M-CSF, VEGF cytokines and expression of MMP-9 gene. The surface chemistry of the CNF scaffolds elicited a modest effect on cytokine production and did not shift the inflammatory profile in vitro or in vivo. The decisive role in development of the foreign body reaction was the slow degradation of the CNF scaffolds.

Pericardial tissue for cardiovascular application: an in-vitro evaluation of established and advanced production processes

Pericardial tissue is widely used as a biomaterial, especially for cardiovascular application. Tissue processing plays a key role in developing future scaffolds derived from biological material, yet standardized evaluation is still pending. This study presents a comprehensive assessment of different treatment protocols of bovine pericardium and compares those findings to commercially available decellularized bovine (CAB) and equine (CAE) pericardial patches. Native samples were fixed with glutaraldehyde (GA) or decellularized. These decellularized samples were subsequently either treated with GA (DEC-GA) or sterilized (DEC). Treatment effects were assessed by histological evaluation of structural and biomechanical properties. Furthermore, decellularization efficacy and accuracy of the applied sterilization protocol were evaluated. Cell seeding of processed pericardial samples with human endothelial cells constituted as biocompatibility test.GA-fixed tissue revealed structural deterioration, cytotoxicity and opposed to popular believe, GA-treatment did not lead to sterility of the samples. Biomechanical assessment revealed an increase in tensile strength of GA and a decrease of DEC and DEC-GA. DEC samples were successfully sterilized and showed good decellularization results, with a significant decrease in residual DNA. Comparative assessment revealed overall good results of CAE, yet results of CAB varied largely, e.g. decellularization efficacy or tissue thickness. Biocompatibility of DEC, CAB and CAE was confirmed by successful cell adhesion. Substantial differences of native tissue properties were observed, resulting in varying treatment efficacies. This study provides a first overview describing consequential variations among biomaterials and illustrates the necessity of multidimensional assessment and tissue quality management for biological scaffold development.

Nanopharmaceuticals for wound healing - Lost in translation?

Today, many of the newly developed pharmaceuticals and medical devices take advantage of nanotechnology and with a rising incidence of chronic diseases such as diabetes and cardiovascular disease, the number of patients afflicted globally with non-healing wounds is growing. This has created a requirement for improved therapies and wound care. However, converting the strategies applied in early research into new products is still challenging. Many of them fail to comply with the market requirements. This review discusses the legal and scientific challenges in the design of nanomedicines for wound healing. Are they lost in translation or is there a new generation of therapeutics in the pipeline?

Surface nanocavitation of titanium modulates macrophage activity

BACKGROUND

Nanoscale surface modifications are widely touted to improve the biocompatibility of medically relevant materials. Immune cells, such as macrophages, play a critical role in the initial healing events following implantation.

METHODS

To understand the response of macrophages to nanotopography better, we exposed U937-derived macrophages to a distinctive mesoporous titanium surface (TiNano) produced by a process of simple chemical nanocavitation, and to mechanically polished titanium (TiPolished) and glass coverslip (Glass) surfaces as controls. Cell numbers and morphology were evaluated. Osteopontin expression and that of the proinflammatory SPARC protein and its stabilin 1 receptor were analyzed. Release of inflammation-associated cytokines and chemokines was also measured.

RESULTS

Compared to the two control surfaces, there were fewer U937 cells on TiNano, and these exhibited a more rounded morphology with long filopodia. The cells showed areas of punctate actin distribution, indicating formation of podosomes. Of the three proteins examined, only osteopontin's immunofluorescence signal was clearly reduced. Irrespective of the substrate, the cytokine assay revealed important variations in expression levels of the multiple molecules analyzed and downregulation in a number of chemokines by the TiNano surface.

CONCLUSION

These results indicate that macrophages sense and respond to the physicochemical cueing generated by the nanocavitated surface, triggering cellular and molecular changes consistent with lesser inflammatory propensity. Given the previously reported beneficial outcome of this mesoporous surface on osteogenic activity, it could be presumed that modulation of the macrophagic response it elicits may also contribute to initial bone-integration events.

Biocompatibility of Intensified Decellularized Equine Carotid Arteries in a Rat Subcutaneous Implantation Model and in a Human In Vitro Model

Limited biocompatibility of decellularized scaffolds is an ongoing challenge in tissue engineering. We recently demonstrated that intensified detergent-based decellularization of equine carotid artery (dEAC_intens) removed residual cellular molecules from the scaffold more efficiently than a conventional decellularization (dEAC_con), although this approach did not eliminate its immunogenicity entirely. CCN1 has been shown to improve biocompatibility of dEAC_con in a sheep model. In this study, we tested the biocompatibility of dEAC_intens and dEAC_con with or without CCN1 coating after subcutaneous implantation in rats for up to 12 weeks. Explants were assessed by conventional histopathology and immunostaining for infiltrating M2 macrophages. Moreover, human macrophages derived from monocytes (MDM) or THP-1 cells (THP-derived macrophages [TDM]) were seeded onto dEAC_con and dEAC_intens, and activation was assessed either by cytokine expression or matrix metalloprotease 2 and 7 staining. dEAC_intens showed a significantly reduced inflammatory infiltration (52%; p < 0.0001), as well as an earlier and denser neovascularization (1.4-fold, p < 0.0001) independent of CCN1 coating, which, however, reduced fibrosis exclusively with dEAC_intens (26-53%; p < 0.05). Human MDM seeded for 48 h onto dEAC_intens showed higher transcript levels for anti-inflammatory IL-10 (2.3-fold), proinflammatory TNFα (2.2-fold), and macrophage/monocyte recruiting MIP1α (3.5-fold; all p < 0.05) and MCP (2.7-fold; p < 0.01), whereas 1.92-fold more TDM on dEAC_intens showed staining for MMP2 (p > 0.001). Thus, although being advantageous in regard to fibrosis, CCN1 coating of dEAC_intens does not appear to be necessary for further improving dEAC_intens excellent biocompatibility in rats. In humans, the unspecific cellular immune response toward dEAC_intens seemed to be more complex, but generally comparable to the mild acute inflammatory tissue reaction with high remodeling activity as observed after rat subcutaneous implantation.

Harnessing macrophage plasticity for tissue regeneration

Macrophages are versatile and plastic effector cells of the immune system, and contribute to diverse immune functions including pathogen or apoptotic cell removal, inflammatory activation and resolution, and tissue healing. Macrophages function as signaling regulators and amplifiers, and influencing their activity is a powerful approach for controlling inflammation or inducing a wound-healing response in regenerative medicine. This review discusses biomaterials-based approaches for altering macrophage activity, approaches for targeting drugs to macrophages, and approaches for delivering macrophages themselves as a therapeutic intervention.

The host response to naturally-derived extracellular matrix biomaterials

Biomaterials based on natural materials including decellularized tissues and tissue-derived hydrogels are becoming more widely used for clinical applications. Because of their native composition and structure, these biomaterials induce a distinct form of the foreign body response that differs from that of non-native biomaterials. Differences include direct interactions with cells via preserved moieties as well as the ability to undergo remodeling. Moreover, these biomaterials could elicit adaptive immune responses due to the presence of modified native molecules. Therefore, these biomaterials present unique challenges in terms of understanding the progression of the foreign body response. This review covers this response to natural materials including natural polymers, decellularized tissues, cell-derived matrix, tissue derived hydrogels, and biohybrid materials. With the expansion of the fields of regenerative medicine and tissue engineering, the current repertoire of biomaterials has also expanded and requires continuous investigation of the responses they elicit.

* Collagen Cross-Linking: Biophysical, Biochemical, and Biological Response Analysis

Extracted forms of collagen are subjected to chemical cross-linking to enhance their stability. However, traditional cross-linking approaches are associated with toxicity and inflammation. This work investigates the stabilization capacity, cytotoxicity and inflammatory response of collagen scaffolds cross-linked with glutaraldehyde (GTA), 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide, 4-arm polyethylene glycol (PEG) succinimidyl glutarate (4SP), genipin (GEN), and oleuropein. Although all cross-linking methods reduced free amine groups, variable data were obtained with respect to denaturation temperature, resistance to collagenase digestion, and mechanical properties. With respect to biological analysis, fibroblast cultures showed no significant difference between the treatments. Although direct cultures with human-derived leukemic monocyte cells (THP-1) clearly demonstrated the cytotoxic effect of GTA, THP-1 cultures supplemented with conditioned medium from the various groups showed no significant difference between the treatments. With respect to cytokine profile, no significant difference in secretion of proinflammatory (e.g., interleukin [IL]-1β, IL-8, tumor necrosis factor-α) and anti-inflammatory (e.g., vascular endothelial growth factor) cytokines was observed between the noncross-linked and the 4SP and GEN cross-linked groups, suggesting the suitability of these agents as collagen cross-linkers.

The release kinetics, antimicrobial activity and cytocompatibility of differently prepared collagen/hydroxyapatite/vancomycin layers: Microstructure vs. nanostructure

The aim of this study was to develop an osteo-inductive resorbable layer allowing the controlled elution of antibiotics to be used as a bone/implant bioactive interface particularly in the case of prosthetic joint infections, or as a preventative procedure with respect to primary joint replacement at a potentially infected site. An evaluation was performed of the vancomycin release kinetics, antimicrobial efficiency and cytocompatibility of collagen/hydroxyapatite layers containing vancomycin prepared employing different hydroxyapatite concentrations. Collagen layers with various levels of porosity and structure were prepared using three different methods: by means of the lyophilisation and electrospinning of dispersions with 0, 5 and 15wt% of hydroxyapatite and 10wt% of vancomycin, and by means of the electrospinning of dispersions with 0, 5 and 15wt% of hydroxyapatite followed by impregnation with 10wt% of vancomycin. The maximum concentration of the released active form of vancomycin characterised by means of HPLC was achieved via the vancomycin impregnation of the electrospun layers, whereas the lowest concentration was determined for those layers electrospun directly from a collagen solution containing vancomycin. Agar diffusion testing revealed that the electrospun impregnated layers exhibited the highest level of activity. It was determined that modification using hydroxyapatite exerts no strong effect on vancomycin evolution. All the tested samples exhibited sufficient cytocompatibility with no indication of cytotoxic effects using human osteoblastic cells in direct contact with the layers or in 24-hour infusions thereof. The results herein suggest that nano-structured collagen-hydroxyapatite layers impregnated with vancomycin following cross-linking provide suitable candidates for use as local drug delivery carriers.

Antifibrotic therapies to control cardiac fibrosis

Cardiac fibrosis occurs naturally after myocardial infarction. While the initially formed fibrotic tissue prevents the infarcted heart tissue from rupture, the progression of cardiac fibrosis continuously expands the size of fibrotic tissue and causes cardiac function decrease. Cardiac fibrosis eventually evolves the infarcted hearts into heart failure. Inhibiting cardiac fibrosis from progressing is critical to prevent heart failure. However, there is no efficient therapeutic approach currently available. Myofibroblasts are primarily responsible for cardiac fibrosis. They are formed by cardiac fibroblast differentiation, fibrocyte differentiation, epithelial to mesenchymal transdifferentiation, and endothelial to mesenchymal transition, driven by cytokines such as transforming growth factor beta (TGF-β), angiotensin II and platelet-derived growth factor (PDGF). The approaches that inhibit myofibroblast formation have been demonstrated to prevent cardiac fibrosis, including systemic delivery of antifibrotic drugs, localized delivery of biomaterials, localized delivery of biomaterials and antifibrotic drugs, and localized delivery of cells using biomaterials. This review addresses current progresses in cardiac fibrosis therapies.

Naturally derived biomaterials for addressing inflammation in tissue regeneration

Tissue regeneration strategies have traditionally relied on designing biomaterials that closely mimic features of the native extracellular matrix (ECM) as a means to potentially promote site-specific cellular behaviors. However, inflammation, while a necessary component of wound healing, can alter processes associated with successful tissue regeneration following an initial injury. These processes can be further magnified by the implantation of a biomaterial within the wound site. In addition to designing biomaterials to satisfy biocompatibility concerns as well as to replicate elements of the composition, structure, and mechanics of native tissue, we propose that ECM analogs should also include features that modulate the inflammatory response. Indeed, strategies that enhance, reduce, or even change the temporal phenotype of inflammatory processes have unique potential as future pro-regenerative analogs. Here, we review derivatives of three natural materials with intrinsic anti-inflammatory properties and discuss their potential to address the challenges of inflammation in tissue engineering and chronic wounds.

Genipin crosslinking reduced the immunogenicity of xenogeneic decellularized porcine whole-liver matrices through regulation of immune cell proliferation and polarization

Decellularized xenogeneic whole-liver matrices are plausible biomedical materials for the bioengineering of liver transplantation. A common method to reduce the inflammatory potential of xenogeneic matrices is crosslinking. Nevertheless, a comprehensive analysis of the immunogenic features of cross-linked decellularized tissue is still lacking. We aimed to reduce the immunogenicity of decellularized porcine whole-liver matrix through crosslinking with glutaraldehyde or genipin, a new natural agent, and investigated the mechanism of the immune-mediated responses. The histologic assessment of the host's immune reaction activated in response to these scaffolds, as well as the M1/M2 phenotypic polarization profile of macrophages, was studied in vivo. The genipin-fixed scaffold elicited a predominantly M2 phenotype response, while the glutaraldehyde-fixed scaffold resulted in disrupted host tissue remodeling and a mixed macrophage polarization profile. The specific subsets of immune cells involved in the responses to the scaffolds were identified in vitro. Crosslinking alleviated the host response by reducing the proliferation of lymphocytes and their subsets, accompanied by a decreased release of both Th1 and Th2 cytokines. Therefore, we conclude that the natural genipin crosslinking could lower the immunogenic potential of xenogeneic decellularized whole-liver scaffolds.

Transforming surgery through biomaterial template technology

Templates inserted into surgical wounds strongly influence the healing responses in humans. The science of these templates, in the form of extracellular matrix biomaterials, is rapidly evolving and improving as the natural interactions with the body become better understood.

The Sustainable Release of Vancomycin and Its Degradation Products From Nanostructured Collagen/Hydroxyapatite Composite Layers

Infections of the musculoskeletal system present a serious problem with regard to the field of orthopedic and trauma medicine. The aim of the experiment described in this study was to develop a resorbable nanostructured composite layer with the controlled elution of antibiotics. The layer is composed of collagen, hydroxyapatite nanoparticles, and vancomycin hydrochloride (10 wt%). The stability of the collagen was enhanced by means of cross-linking. Four cross-linking agents were studied, namely an ethanol solution, a phosphate buffer solution of N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide hydrochloride/N-hydroxysuccinimide, genipin, and nordihydroguaiaretic acid. High performance liquid chromatography was used so as to characterize the in vitro release rates of the vancomycin and its crystalline degradation antibiotically inactive products over a 21-day period. The maximum concentration of the released active form of vancomycin (approximately 265 mg/L) exceeded the minimum inhibitory concentration up to an order of 17 times without triggering the burst releasing effect. At the end of the experiment, the minimum inhibitory concentration was exceeded by up to 6 times (approximately 100 mg/L). It was determined that the modification of collagen with hydroxyapatite nanoparticles does not negatively influence the sustainable release of vancomycin. The balance of vancomycin and its degradation products was observed after 14 days of incubation.

Haemostatic Response of Polyethylene Terephthalate Treated by Oxygen and Nitrogen Plasma Afterglows

Samples of polymer polyethylene terephthalate were coated with heparin and the haemostatic response has been determined by optical imaging of samples after incubation with fresh blood from a healthy donor. Prior to coating the samples were treated by neutral reactive particles of the oxygen or nitrogen plasma flowing afterglow. X-ray photoelectron spectroscopy analysis showed intensive functionalization of the polymer foils upon treatment with afterglows; however, the concentration of sulphur from heparin remained below the detection limit. The optical imaging showed densely distributed blood platelets in highly activated forms on untreated samples, whereas treatment with both afterglows revealed improved hemocompatibility. Best results were obtained for oxygen-functionalized polymer, whereas additional coating with heparin caused moderate loss of hemocompatibility, that was explained by deactivation of surface functional groups upon incubation with heparin.

Effect of carbodiimide on the structural stability of resin/dentin interface

Clinical longevity of composite resin restorations is a significant problem in adhesive dentistry. Most of the current simplified adhesives present good immediate bonding, but the bond strength gradually falls over a period due to biodegradation at the resin-dentin interface. Various strategies have been proposed to improve the durability of resin-dentin bond including the use of matrix metalloproteinases inhibitors and collagen cross-linkers, biomimetic remineralization, ethanol wet bonding, to improve the physical and mechanical properties of the bonding substrate, i.e., dentin. However, all are under preliminary research and without any conclusive evidence. Therefore, this paper addresses the current challenge in dental adhesion, i.e., poor durability of resin-dentin bond and introduces the concept of dentin biomodification as an alternative way for improving the long-term bonding effectiveness of current adhesives to dentin and also provides an overview of a synthetic collagen cross-linking agent carbodiimide (EDC) including its mechanism of action, literature review of studies evaluating EDC, variables associated with its use and its cytotoxicity. Search was performed across the electronic databases (PubMed, Ebsco host, and Google search engine) to identify manuscripts for inclusion, using the keywords: carbodiimide, dentin bonding, durability, resin-dentin interface, and collagen cross-linking. Thirty-five articles were finally included, and the last search was made in February 2016.

The effects of different cross-linking conditions on collagen-based nanocomposite scaffolds-an in vitro evaluation using mesenchymal stem cells

Nanocomposite scaffolds which aimed to imitate a bone extracellular matrix were prepared for bone surgery applications. The scaffolds consisted of polylactide electrospun nano/sub-micron fibres, a natural collagen matrix supplemented with sodium hyaluronate and natural calcium phosphate nano-particles (bioapatite). The mechanical properties of the scaffolds were improved by means of three different cross-linking agents: N-(3-dimethylamino propyl)-N'-ethylcarbodiimide hydrochloride and N-hydroxysuccinimide in an ethanol solution (EDC/NHS/EtOH), EDC/NHS in a phosphate buffer saline solution (EDC/NHS/PBS) and genipin. The effect of the various cross-linking conditions on the pore size, structure and mechanical properties of the scaffolds were subsequently studied. In addition, the mass loss, the swelling ratio and the pH of the scaffolds were determined following their immersion in a cell culture medium. Furthermore, the metabolic activity of human mesenchymal stem cells (hMSCs) cultivated in scaffold infusions for 2 and 7 days was assessed. Finally, studies were conducted of cell adhesion, proliferation and penetration into the scaffolds. With regard to the structural stability of the tested scaffolds, it was determined that EDC/NHS/PBS and genipin formed the most effectively cross-linked materials. Moreover, it was discovered that the genipin cross-linked scaffold also provided the best conditions for hMSC cultivation. In addition, the infusions from all the scaffolds were found to be non-cytotoxic. Thus, the genipin and EDC/NHS/PBS cross-linked scaffolds can be considered to be promising biomaterials for further in vivo testing and bone surgery applications.

Transdentinal cytotoxicity of glutaraldehyde on odontoblast-like cells

OBJECTIVES

This study investigated the transdentinal cytotoxicity of glutahaldehyde-containing solutions/materials on odontoblast-like cells.

METHODS

Dentin discs were adapted to artificial pulp chambers. MDPC-23 cells were seeded on the pulpal side of the discs and the occlusal surface was treated with the following solutions: water, 2% glutaraldehyde (GA), 5% GA, 10% GA, Gluma Comfort Bond+Desensitizer (GCB+De) or Gluma Desensitizer (GDe). Cell viability and morphology were assessed by the Alamar Blue assay and SEM. The eluates were collected and applied on cells seeded in 24-well plates. After 7 or 14 days the total protein (TP) production, alkaline phosphatase activity (ALP) and deposition of mineralized nodules (MN) were evaluated.

RESULTS

Data were analyzed by Kruskal-Wallis and Mann-Whitney tests (p<0.05). GA solutions were not cytotoxic against MDPC-23. GCB+De (85.1%) and GDe (77.2%) reduced cell viability as well as TP production and ALP activity at both periods. After 14 days, GCB+De and GDe groups produced less MN. Affected MDPC-23 presented deformation of the cytoskeleton and reduction of cellular projections.

CONCLUSIONS

The treatment with 2.5%, 5% and 10% GA was not harmful to odontoblast-like cells. Conversely, when GA was combined with other components like HEMA, the final material became cytotoxic.

CLINICAL SIGNIFICANCE

Glutaraldehyde has been used to decrease dentin hypersensitivity. This substance is also capable of preventing resin-dentin bond degradation by cross-linking collagen and MMPs. This study showed that GA might be safe when applied on acid etched dentin. However, when combined with HEMA the product becomes cytotoxic.

To cross-link or not to cross-link? Cross-linking associated foreign body response of collagen-based devices

Collagen-based devices, in various physical conformations, are extensively used for tissue engineering and regenerative medicine applications. Given that the natural cross-linking pathway of collagen does not occur in vitro, chemical, physical, and biological cross-linking methods have been assessed over the years to control mechanical stability, degradation rate, and immunogenicity of the device upon implantation. Although in vitro data demonstrate that mechanical properties and degradation rate can be accurately controlled as a function of the cross-linking method utilized, preclinical and clinical data indicate that cross-linking methods employed may have adverse effects on host response, especially when potent cross-linking methods are employed. Experimental data suggest that more suitable cross-linking methods should be developed to achieve a balance between stability and functional remodeling.

Biodegradable chitosan microparticles induce delayed STAT-1 activation and lead to distinct cytokine responses in differentially polarized human macrophages in vitro

Current data suggest that chitosan activates wound macrophages to release endogenous factors that guide mesenchymal stem cell (MSC) to bone fractures. We tested the hypothesis that chitosan, a polymer containing glucosamine and N-acetyl glucosamine, stimulates macrophages in different polarization states to release functional MSC chemokines and mainly anabolic factors. Low-serum conditioned medium was collected from M0, M1 and M2a U937 macrophages previously differentiated with phorbol myristate acetate (PMA) and exposed or not for 24h to chitosan microparticles (80% degree of deacetylation, DDA, 130kDa). Chitosan particles were highly phagocytosed. Chitosan enhanced anabolic factor release from M0 and M2a macrophages (MCP-1, IP-10, MIP-1beta, IL-1ra, IL-10, PDGF), and IL-1beta release, with 25- to 400-fold excess IL-1ra over IL-1beta. In M1 macrophages, chitosan enhanced IL-1beta without enhancing or suppressing inflammatory factor release (IL-6, IP-10, IL-8). M0 and M2a macrophages, with or without chitosan stimulation, produced conditioned medium that promoted 2-fold more MSC chemotaxis than low-serum control medium, while M1-conditioned medium failed to induce MSC chemotaxis. Acetylated chitosan induced U937 macrophages to release IL-1ra without STAT-6 activation, and also induced a delayed STAT-1 activation/IP-10 release response that was not observed using non-biodegradable chitosan (98% DDA, 130kDa). In primary human macrophages, acetylated chitosan enhanced IL-1ra release without inducing IL-1beta, and required PMA priming to elicit STAT-1 activation and IP-10 release. We conclude that biodegradable chitosan particles enhance M0 and M2a macrophage anabolic responses independent of the IL4/STAT-6 axis, by inducing excess IL-1ra over IL-1beta and more chemokine release, without altering their inherent capacity to attract MSCs.

Transdentinal cytotoxicity of carbodiimide (EDC) and glutaraldehyde on odontoblast-like cells

OBJECTIVE

To evaluate the transdentinal cytotoxicity of three different concentrations of carbodiimide (EDC) or 5% glutaraldehyde (GA) on MDPC-23 cells.

METHODS

Seventy 0.4-mm-thick dentin disks obtained from human molars were adapted to artificial pulp chambers. MDPC-23 cells were seeded on the pulpal surface of the disks. After 48 hours, the occlusal dentin was acid-etched and treated for 60 seconds with one of the following solutions (n=10): no treatment (negative control); 0.1 M, 0.3 M, or 0.5 M EDC; 5% GA; Sorensen buffer; or 29% hydrogen peroxide (positive control). Cell viability and morphology were assessed by methyltetrazolium assay and scanning electron microscopy (SEM), respectively. The eluates were collected after the treatments and applied on MDPC-23 seeded in a 24-well plate to analyze cell death, total protein (TP), and collagen production. The last two tests were performed 24 hours and seven days after the challenge. Data were analyzed by Kruskal-Wallis and Mann-Whitney tests (p<0.05).

RESULTS

EDC at all test concentrations did not reduce cell viability, while 5% GA did increase cell metabolism. Cell death by necrosis was not elicited by EDC or 5% GA. At the 24-hour period, 0.3 M and 0.5 M EDC reduced TP production by 18% and 36.8%, respectively. At seven days, increased TP production was observed in all groups. Collagen production at the 24-hour period was reduced when 0.5 M EDC was used. After seven days, no difference was observed among the groups. SEM showed no alteration in cell morphology or number, except in the hydrogen peroxide group.

CONCLUSIONS

Treatment of acid-etched dentin with EDC or GA did not cause transdentinal cytotoxic effects on odontoblast-like cells.

Macrophage-like U937 cells recognize collagen fibrils with strain-induced discrete plasticity damage

At its essence, biomechanical injury to soft tissues or tissue products means damage to collagen fibrils. To restore function, damaged collagen must be identified, then repaired or replaced. It is unclear at present what the kernel features of fibrillar damage are, how phagocytic or synthetic cells identify that damage, and how they respond. We recently identified a nanostructural motif characteristic of overloaded collagen fibrils that we have termed discrete plasticity. In this study, we have demonstrated that U937 macrophage-like cells respond specifically to overload-damaged collagen fibrils. Tendons from steer tails were bisected, one half undergoing 15 cycles of subrupture mechanical overload and the other serving as an unloaded control. Both halves were decellularized, producing sterile collagen scaffolds that contained either undamaged collagen fibrils, or fibrils with discrete plasticity damage. Matched-pairs were cultured with U937 cells differentiated to a macrophage-like form directly on the substrate. Morphological responses of the U937 cells to the two substrates-and evidence of collagenolysis by the cells-were assessed using scanning electron microscopy. Enzyme release into medium was quantified for prototypic matrix metalloproteinase-1 (MMP-1) collagenase, and MMP-9 gelatinase. When adherent to damaged collagen fibrils, the cells clustered less, showed ruffled membranes, and frequently spread: increasing their contact area with the damaged substrate. There was clear structural evidence of pericellular enzymolysis of damaged collagen-but not of control collagen. Cells on damaged collagen also released significantly less MMP-9. These results show that U937 macrophage-like cells recognize strain-induced discrete plasticity damage in collagen fibrils: an ability that may be important to their removal or repair.