Exogenous stromal derived factor-1 releasing silk scaffold combined with intra-articular injection of progenitor cells promotes bone-ligament-bone regeneration

Biomimetic gradient scaffolds for the tissue engineering and regeneration of rotator cuff enthesis

Rotator cuff tear is one of the most common musculoskeletal disorders, which often results in recurrent shoulder pain and limited movement. Enthesis is a structurally complex and functionally critical interface connecting tendon and bone that plays an essential role in maintaining integrity of the shoulder joint. Despite the availability of advanced surgical procedures for rotator cuff repair, there is a high rate of failure following surgery due to suboptimal enthesis healing and regeneration. Novel strategies based on tissue engineering are gaining popularity in improving tendon-bone interface (TBI) regeneration. Through incorporating physical and biochemical cues into scaffold design which mimics the structure and composition of native enthesis is advantageous to guide specific differentiation of seeding cells and facilitate the formation of functional tissues. In this review, we summarize the current state of research in enthesis tissue engineering highlighting the development and application of biomimetic scaffolds that replicate the gradient TBI. We also discuss the latest techniques for fabricating potential translatable scaffolds such as 3D bioprinting and microfluidic device. While preclinical studies have demonstrated encouraging results of biomimetic gradient scaffolds, the translation of these findings into clinical applications necessitates a comprehensive understanding of their safety and long-term efficacy.

Injectable Self-Oxygenating Cardio-Protective and Tissue Adhesive Silk-Based Hydrogel for Alleviating Ischemia After Mi Injury

Myocardial infarction (MI) is a significant cardiovascular disease that restricts blood flow, resulting in massive cell death and leading to stiff and noncontractile fibrotic scar tissue formation. Recently, sustained oxygen release in the MI area has shown regeneration ability; however, improving its therapeutic efficiency for regenerative medicine remains challenging. Here, a combinatorial strategy for cardiac repair by developing cardioprotective and oxygenating hybrid hydrogels that locally sustain the release of stromal cell-derived factor-1 alpha (SDF) and oxygen for simultaneous activation of neovascularization at the infarct area is presented. A sustained release of oxygen and SDF from injectable, mechanically robust, and tissue-adhesive silk-based hybrid hydrogels is achieved. Enhanced endothelialization under normoxia and anoxia is observed. Furthermore, there is a marked improvement in vascularization that leads to an increment in cardiomyocyte survival by ≈30% and a reduction of the fibrotic scar formation in an MI animal rodent model. Improved left ventricular systolic and diastolic functions by ≈10% and 20%, respectively, with a ≈25% higher ejection fraction on day 7 are also observed. Therefore, local delivery of therapeutic oxygenating and cardioprotective hydrogels demonstrates beneficial effects on cardiac functional recovery for reparative therapy.

Biomimetic triphasic silk fibroin scaffolds seeded with tendon-derived stem cells for tendon-bone junction regeneration

The regeneration of tendon and bone junctions (TBJs), a fibrocartilage transition zone between tendons and bones, is a challenge due to the special triphasic structure. In our study, a silk fibroin (SF)-based triphasic scaffold consisting of aligned type I collagen (Col I), transforming growth factor β (TGF-β), and hydroxyapatite (HA) was fabricated to mimic the compositional gradient feature of the native tendon-bone architecture. Rat tendon-derived stem cells (rTDSCs) were loaded on the triphasic SF scaffold, and the high cell viability suggested that the scaffold presents good biocompatibility. Meanwhile, increased expressions of tenogenic-, chondrogenic-, and osteogenic-related genes in the TBJs were observed. The in vivo studies of the rTDSC-seeded scaffold in a rat TBJ rupture model showed tendon tissue regeneration with a clear transition zone within 8 weeks of implantation. These results indicated that the biomimetic triphasic SF scaffolds seeded with rTDSCs have great potential to be applied in TBJ regeneration.

Optimized Allogenic Decellularized Meniscal Scaffold Modified by Collagen Affinity Stromal Cell-Derived Factor SDF1α for Meniscal Regeneration: A 6- and 12-Week Animal Study in a Rabbit Model

BACKGROUND

Total meniscectomy for treating massive meniscal tears may lead to joint instability, cartilage degeneration, and even progressive osteoarthritis. The meniscal substitution strategies for advancing reconstruction of the meniscus deserve further investigation.

HYPOTHESIS

A decellularized meniscal scaffold (DMS) modified with collagen affinity stromal cell-derived factor (C-SDF1α) may facilitate meniscal regeneration and protect cartilage from abrasion.

STUDY DESIGN

Controlled laboratory study.

METHODS

The authors first modified DMS with C-SDF1α to fabricate a new meniscal graft (DMS-CBD [collagen-binding domain]). Second, they performed in vitro studies to evaluate the release dynamics, biocompatibility, and differentiation inducibility (osteogenic, chondrogenic, and tenogenic differentiation) on human bone marrow mesenchymal stem cells. Using in vivo studies, they subjected rabbits that received medial meniscectomy to a transplantation procedure to implement their meniscal graft. At postoperative weeks 6 and 12, the meniscal regeneration outcomes and chondroprotective efficacy of the new meniscal graft were evaluated by macroscopic observation, histology, micromechanics, and immunohistochemistry tests.

RESULTS

In in vitro studies, the optimized DMS-CBD graft showed notable biocompatibility, releasing efficiency, and chondrogenic inducibility. In in vivo studies, the implanted DMS-CBD graft after total meniscectomy promoted the migration of cells and extracellular matrix deposition in transplantation and further facilitated meniscal regeneration and protected articular cartilage from degeneration.

CONCLUSION

The new meniscal graft (DMS-CBD) accelerated extracellular matrix deposition and meniscal regeneration and protected articular cartilage from degeneration.

CLINICAL RELEVANCE

The results demonstrate that the DMS-CBD graft can serve as a potential meniscal substitution after meniscectomy.

Mechanical Signal-Tailored Hydrogel Microspheres Recruit and Train Stem Cells for Precise Differentiation

The aberrant mechanical microenvironment in degenerated tissues induces misdirection of cell fate, making it challenging to achieve efficient endogenous regeneration. Herein, a hydrogel microsphere-based synthetic niche with integrated cell recruitment and targeted cell differentiation properties via mechanotransduction is constructed . Through the incorporation of microfluidics and photo-polymerization strategies, fibronectin (Fn) modified methacrylated gelatin (GelMA) microspheres are prepared with the independently tunable elastic modulus (1-10Kpa) and ligand density (2 and 10 µg mL-1 ), allowing a wide range of cytoskeleton modulation to trigger the corresponding mechanobiological signaling. The combination of the soft matrix (2Kpa) and low ligand density (2 µg mL-1 ) can support the nucleus pulposus (NP)-like differentiation of intervertebral disc (IVD) progenitor/stem cells by translocating Yes-associated protein (YAP), without the addition of inducible biochemical factors. Meanwhile, platelet-derived growth factor-BB (PDGF-BB) is loaded onto Fn-GelMA microspheres (PDGF@Fn-GelMA) via the heparin-binding domain of Fn to initiate endogenous cell recruitment. In in vivo experiments, hydrogel microsphere-niche maintained the IVD structure and stimulated matrix synthesis. Overall, this synthetic niche with cell recruiting and mechanical training capabilities offered a promising strategy for endogenous tissue regeneration.

Could an Anterior Cruciate Ligament Be Tissue-Engineered from Silk?

Silk has a long history as an exclusive textile, but also as a suture thread in medicine; nowadays, diverse cell carriers are manufactured from silk. Its advantages are manifold, including high biocompatibility, biomechanical strength and processability (approved for nearly all manufacturing techniques). Silk's limitations, such as scarcity and batch to batch variations, are overcome by gene technology, which allows for the upscaled production of recombinant "designed" silk proteins. For processing thin fibroin filaments, the sericin component is generally removed (degumming). In contrast to many synthetic biomaterials, fibroin allows for superior cell adherence and growth. In addition, silk grafts demonstrate superior mechanical performance and long-term stability, making them attractive for anterior cruciate ligament (ACL) tissue engineering. Looking at these promising properties, this review focusses on the responses of cell types to silk variants, as well as their biomechanical properties, which are relevant for ACL tissue engineering. Meanwhile, sericin has also attracted increasing interest and has been proposed as a bioactive biomaterial with antimicrobial properties. But so far, fibroin was exclusively used for experimental ACL tissue engineering approaches, and fibroin from spider silk also seems not to have been applied. To improve the bone integration of ACL grafts, silk scaffolds with osteogenic functionalization, silk-based tunnel fillers and interference screws have been developed. Nevertheless, signaling pathways stimulated by silk components remain barely elucidated, but need to be considered during the development of optimized silk cell carriers for ACL tissue engineering.

A cell-free tissue-engineered tracheal substitute with sequential cytokine release maintained airway opening in a rabbit tracheal full circumferential defect model

In this study, a cell-free tissue-engineered tracheal substitute was developed, which is based on a 3D-printed polycaprolactone scaffold coated with a gelatin-methacryloyl (GelMA) hydrogel, with transforming growth factor-β1 (TGF-β) and stromal cell-derived factor-1α (SDF-1) sequentially embedded, to facilitate cell recruitment and differentiation toward chondrocyte-phenotype. TGF-β was loaded onto polydopamine particles, and then encapsulated into the GelMA together with SDF-1, and called G/S/P@T, which was used to coat 3D-printed PCL scaffold to form the tracheal substitute. A rapid release of SDF-1 was observed during the first week, followed by a slow and sustained release of TGF-β for approximately four weeks. The tracheal substitute significantly promoted the recruitment of mesenchymal stromal cells (MSCs) or human bronchial epithelial cells in vitro, and enhanced the ability of MSCs to differentiate towards chondrocyte phenotype. Implantation of the tissue-engineered tracheal substitute with a rabbit tracheal anterior defect model improved regeneration of airway epithelium, recruitment of endogenous MSCs and expression of markers of chondrocytes at the tracheal defect site. Moreover, the tracheal substitute maintained airway opening for 4 weeks in a tracheal full circumferential defect model with airway epithelium coverage at the defect sites without granulation tissue accumulation in the tracheal lumen or underneath. The promising results suggest that this simple, cell-free tissue-engineered tracheal substitute can be used directly after tracheal defect removal and should be further developed towards clinical application.

Biomimetic Scaffolds for Tendon Tissue Regeneration

Tendon tissue connects muscle to bone and plays crucial roles in stress transfer. Tendon injury remains a significant clinical challenge due to its complicated biological structure and poor self-healing capacity. The treatments for tendon injury have advanced significantly with the development of technology, including the use of sophisticated biomaterials, bioactive growth factors, and numerous stem cells. Among these, biomaterials that the mimic extracellular matrix (ECM) of tendon tissue would provide a resembling microenvironment to improve efficacy in tendon repair and regeneration. In this review, we will begin with a description of the constituents and structural features of tendon tissue, followed by a focus on the available biomimetic scaffolds of natural or synthetic origin for tendon tissue engineering. Finally, we will discuss novel strategies and present challenges in tendon regeneration and repair.

Anatomical Tissue Engineering of the Anterior Cruciate Ligament Entheses

The firm integration of anterior cruciate ligament (ACL) grafts into bones remains the most demanding challenge in ACL reconstruction, since graft loosening means graft failure. For a functional-tissue-engineered ACL substitute to be realized in future, robust bone attachment sites (entheses) have to be re-established. The latter comprise four tissue compartments (ligament, non-calcified and calcified fibrocartilage, separated by the tidemark, bone) forming a histological and biomechanical gradient at the attachment interface between the ACL and bone. The ACL enthesis is surrounded by the synovium and exposed to the intra-articular micromilieu. This review will picture and explain the peculiarities of these synovioentheseal complexes at the femoral and tibial attachment sites based on published data. Using this, emerging tissue engineering (TE) strategies addressing them will be discussed. Several material composites (e.g., polycaprolactone and silk fibroin) and manufacturing techniques (e.g., three-dimensional-/bio-printing, electrospinning, braiding and embroidering) have been applied to create zonal cell carriers (bi- or triphasic scaffolds) mimicking the ACL enthesis tissue gradients with appropriate topological parameters for zones. Functionalized or bioactive materials (e.g., collagen, tricalcium phosphate, hydroxyapatite and bioactive glass (BG)) or growth factors (e.g., bone morphogenetic proteins [BMP]-2) have been integrated to achieve the zone-dependent differentiation of precursor cells. However, the ACL entheses comprise individual (loading history) asymmetric and polar histoarchitectures. They result from the unique biomechanical microenvironment of overlapping tensile, compressive and shear forces involved in enthesis formation, maturation and maintenance. This review should provide a road map of key parameters to be considered in future in ACL interface TE approaches.

Strategies to promote tendon-bone healing after anterior cruciate ligament reconstruction: Present and future

At present, anterior cruciate ligament (ACL) reconstruction still has a high failure rate. Tendon graft and bone tunnel surface angiogenesis and bony ingrowth are the main physiological processes of tendon-bone healing, and also the main reasons for the postoperative efficacy of ACL reconstruction. Poor tendon-bone healing has been also identified as one of the main causes of unsatisfactory treatment outcomes. The physiological process of tendon-bone healing is complicated because the tendon-bone junction requires the organic fusion of the tendon graft with the bone tissue. The failure of the operation is often caused by tendon dislocation or scar healing. Therefore, it is important to study the possible risk factors for tendon-bone healing and strategies to promote it. This review comprehensively analyzed the risk factors contributing to tendon-bone healing failure after ACL reconstruction. Additionally, we discuss the current strategies used to promote tendon-bone healing following ACL reconstruction.

Dimmed gene knockout shortens larval growth and reduces silk yield in the silkworm, Bombyx mori

The bHLH domain transcription factor, Bombyx mori-derived dimmed (Bmdimm), is directly regulated by the JH-BmMet/BmSRC-BmKr-h1 pathway and plays a key role in regulating the expression of FibH, which codes the main component of silk protein. However, the other roles of Bmdimm in silk protein synthesis remain unclear. Here, we established a Bmdimm knockout (KO) line containing a 7-bp deletion via CRISPR/Cas9 system, which led to the absence of the bHLH domain. The expression level of silk protein genes and silk yield decreased significantly in the Bmdimm KO line. Moreover, knocking out Bmdimm led to shortened larval stages and significant weight loss in larvae and adults. Bmdimm was found to be highly expressed in the silk gland, but it was also expressed in the fat body. The expression level of Bmkr-h1 in the fat body was significantly downregulated in the Bmdimm KO line. Exogenous JHA treatment upregulated Bmkr-h1 and rescued the phenotype of larval growth in the Bmdimm KO line. In conclusion, knocking out Bmdimm led to a shortened larval stage via the inhibition of Bmkr-h1 expression, then reduced silk yield. These findings help to elucidate the regulatory mechanism of fibroin synthesis and larval development in silkworms.

Strategies for promoting tendon-bone healing: Current status and prospects

Tendon-bone insertion (TBI) injuries are common, primarily involving the rotator cuff (RC) and anterior cruciate ligament (ACL). At present, repair surgery and reconstructive surgery are the main treatments, and the main factor determining the curative effect of surgery is postoperative tendon-bone healing, which requires the stable combination of the transplanted tendon and the bone tunnel to ensure the stability of the joint. Fibrocartilage and bone formation are the main physiological processes in the bone marrow tract. Therefore, therapeutic measures conducive to these processes are likely to be applied clinically to promote tendon-bone healing. In recent years, biomaterials and compounds, stem cells, cell factors, platelet-rich plasma, exosomes, physical therapy, and other technologies have been widely used in the study of promoting tendon-bone healing. This review provides a comprehensive summary of strategies used to promote tendon-bone healing and analyses relevant preclinical and clinical studies. The potential application value of these strategies in promoting tendon-bone healing was also discussed.

Exosome-based strategy for degenerative disease in orthopedics: Recent progress and perspectives

BACKGROUND

Degenerative diseases in orthopaedics have become a significant global public health issue with the aging of the population worldwide. The traditional medical interventions, including physical therapy, pharmacological therapy and even surgery, hardly work to modify degenerative progression. Stem cell-based therapy is widely accepted to treat degenerative orthopaedic disease effectively but possesses several limitations, such as the need for strict monitoring of production and storage and the potential risks of tumorigenicity and immune rejection in clinical translation. Furthermore, the ethical issues surrounding the acquisition of embryonic stem cells are also broadly concerned. Exosome-based therapy has rapidly grown in popularity in recent years and is regarded as an ideal alternative to stem cell-based therapy, offering a promise to achieve 'cell-free' tissue regeneration.

METHODS

Traditionally, the native exosomes extracted from stem cells are directly injected into the injured site to promote tissue regeneration. Recently, several modified exosome-based strategies were developed to overcome the limitations of native exosomes, which include mainly exogenous molecule loading and exosome delivery through scaffolds. In this paper, a systematic review of the exosome-based strategy for degenerative disease in orthopaedics is presented.

RESULTS

Treatment strategies based on the native exosomes are effective but with several disadvantages such as rapid diffusion and insufficient and fluctuating functional contents. The modified exosome-based strategies can better match the requirements of the regeneration in some complex healing processes.

CONCLUSION

Exosome-based strategies hold promise to manage degenerative disease in orthopaedics prior to patients reaching the advanced stage of disease in the future. The timely summary and highlights offered herein could provide a research perspective to promote the development of exosome-based therapy, facilitating the clinical translation of exosomes in orthopaedics.

TRANSLATIONAL POTENTIAL OF THIS ARTICLE

Exosome-based therapy is superior in anti-senescence and anti-inflammatory effects and possesses lower risks of tumorigenicity and immune rejection relative to stem cell-based therapy. Exosome-based therapy is regarded as an ideal alternative to stem cell-based therapy, offering a promise to achieve 'cell-free' tissue regeneration.

Reconstruction of Rabbit Anterior Cruciate Ligament by Bone Marrow-Derived Mesenchymal Stem Cell Implantation Through a Weft-Knitted Silk Mesh Scaffold Covering a Whip-Shaped Core

To investigate the feasibility of using whip core wrapped by silk weft knitted mesh sheath as a scaffold and bone marrow-derived mesenchymal stem cells (BMSCs) to reconstruct the rabbit anterior cruciate ligament (ACL), BMSC implantation using the mesh-whip scaffold was performed to construct a BMSC-scaffold complex. Then, the BMSC-scaffold complex was implanted into an animal model of an ACL deficient rabbit. Regenerated ACLs were then taken from the animal model three and six months after implantation, followed by hematoxylin-eosin and Masson staining, quantitative RT-PCR detection, as well as mechanical performance evaluation. The results showed that many Sharpey’s fibers had arranged regularly between the neo-ACL and the bone three months after surgery, and an interface structure formed six months after surgery. Regenerated ligaments contained silk fibers and suficient collagen. Type I collagen, type III collagen, and tenascin-C were all highly expressed in the experimental group compared to the control group (no BMSC implantation) in the regenerated ligaments. In addition, the maximum pullout force values of neo-ACL in the three- and six-month experimental groups were 70.6±17.8 N and 122.8±25.7 N, respectively. The findings suggest that BMSC implantation using the mesh-whip scaffold is a promising method to reconstruct rabbit ACL.

Study on the angiogenesis ability of Polymethyl methacrylate-mineralized collagen/Mg-Ca composite material in vitro and the bone formation effect in vivo

Magnesium (Mg) and its alloys show high degrees of biocompatibility and biodegradability, used as biodegrad able materials in biomedical applications. In this study, Polymethyl methacrylate (PMMA) - mineralized collagen (nano-Hydroxyapatite/collagen; nHAC)/Mg-Ca composite materials were prepared, to study the angiogenesis ability of its composite materials on Human umbilical vein endothelial cells (HUVECs) and its osteogenesis effect in vivo. The results showed that the PMMA-nHAC reinforcement materials can promote the proliferation and adhesion in HUVECs of Mg matrix significantly, it can enhance the migration motility and VEGF expression of HUVECs. In vivo, Micro-CT examination showed that with coated samples presenting the highest bone formation. Histologically, the materials and their corrosion products caused no systematic or local cytotoxicological effects. Therefore, the Mg matrix composites prepared in the present study has good biocompatibility and PMMA-nHAC/Mg-Ca composite may be an ideal orthopedic material to improve the bone formation, and biodegradable magnesium based implants with bioactivity have potential applications in bone tissue.

Bioinspired Silk Fibroin-Based Composite Grafts as Bone Tunnel Fillers for Anterior Cruciate Ligament Reconstruction

Anterior cruciate ligament (ACL) replacement is still a big challenge in orthopedics due to the need to develop bioinspired implants that can mimic the complexity of bone-ligament interface. In this study, we propose biomimetic composite tubular grafts (CTGs) made of horseradish peroxidase (HRP)-cross-linked silk fibroin (SF) hydrogels containing ZnSr-doped β-tricalcium phosphate (ZnSr-β-TCP) particles, as promising bone tunnel fillers to be used in ACL grafts (ACLGs) implantation. For comparative purposes, plain HRP-cross-linked SF hydrogels (PTGs) were fabricated. Sonication and freeze-drying methodologies capable of inducing crystalline β-sheet conformation were carried out to produce both the CTGs and PTGs. A homogeneous microstructure was achieved from microporous to nanoporous scales. The mechanical properties were dependent on the inorganic powder’s incorporation, with a superior tensile modulus observed on the CTGs (12.05 ± 1.03 MPa) as compared to the PTGs (5.30 ± 0.93 MPa). The CTGs presented adequate swelling properties to fill the space in the bone structure after bone tunnel enlargement and provide a stable degradation profile under low concentration of protease XIV. The in vitro studies revealed that SaOs-2 cells adhered, proliferated and remained viable when cultured into the CTGs. In addition, the bioactive CTGs supported the osteogenic activity of cells in terms of alkaline phosphatase (ALP) production, activity, and relative gene expression of osteogenic-related markers. Therefore, this study is the first evidence that the developed CTGs hold adequate structural, chemical, and biological properties to be used as bone tunnel fillers capable of connecting to the ACL tissue while stimulating bone tissue regeneration for a faster osteointegration.

Multifunctional Nanomachinery for Enhancement of Bone Healing

The visionary idea that RNA adopts nonbiological roles in today's nanomaterial world has been nothing short of phenomenal. These RNA molecules have ample chemical functionality and self-assemble to form distinct nanostructures in response to external stimuli. They may be combined with inorganic materials to produce nanomachines that carry cargo to a target site in a controlled manner and respond dynamically to environmental changes. Comparable to biological cells, programmed RNA nanomachines have the potential to replicate bone healing in vitro. Here, an RNA-biomineral nanomachine is developed, which accomplishes intrafibrillar and extrafibrillar mineralization of collagen scaffolds to mimic bone formation in vitro. Molecular dynamics simulation indicates that noncovalent hydrogen bonding provides the energy source that initiates self-assembly of these nanomachines. Incorporation of the RNA-biomineral nanomachines into collagen scaffolds in vivo creates an osteoinductive microenvironment within a bone defect that is conducive to rapid biomineralization and osteogenesis. Addition of RNA-degrading enzymes into RNA-biomineral nanomachines further creates a stop signal that inhibits unwarranted bone formation in tissues. The potential of RNA in building functional nanostructures has been underestimated in the past. The concept of RNA-biomineral nanomachines participating in physiological processes may transform the nanoscopic world of life science.

Bioactive Silk Fibroin-Based Hybrid Biomaterials for Musculoskeletal Engineering: Recent Progress and Perspectives

Musculoskeletal engineering has been considered as a promising approach to customize regenerated tissue (such as bone, cartilage, tendon, and ligament) via a self-healing performance. Recent advances have demonstrated the great potential of bioactive materials for regenerative medicine. Silk fibroin (SF), a natural polymer, is regarded as a remarkable bioactive material for musculoskeletal engineering thanks to its biocompatibility, biodegradability, and tunability. To improve tissue-engineering performance, silk fibroin is hybridized with other biomaterials to form silk-fibroin-based hybrid biomaterials, which achieve superior mechanical and biological performance. Herein, we summarize the recent development of silk-based hybrid biomaterials in musculoskeletal tissue with reasonable generalization and classification, mainly including silk fibroin-based inorganic and organic hybrid biomaterials. The applied inorganics are composed of calcium phosphate, graphene oxide, titanium dioxide, silica, and bioactive glass, while the polymers include polycaprolactone, collagen (or gelatin), chitosan, cellulose, and alginate. This article mainly focuses on the physical and biological performances both in vitro and in vivo study of several common silk-based hybrid biomaterials in musculoskeletal engineering. The timely summary and highlight of silk-fibroin-based hybrid biomaterials will provide a research perspective to promote the further improvement and development of silk fibroin hybrid biomaterials for improved musculoskeletal engineering.

Application of Stem Cell Therapy for ACL Graft Regeneration

Graft regeneration after anterior cruciate ligament (ACL) reconstruction surgery is a complex three-stage process, which usually takes a long duration and often results in fibrous scar tissue formation that exerts a detrimental impact on the patients' prognosis. Hence, as a regeneration technique, stem cell transplantation has attracted increasing attention. Several different stem cell types have been utilized in animal experiments, and almost all of these have shown good capacity in improving tendon-bone regeneration. Various differentiation inducers have been widely applied together with stem cells to enhance specific lineage differentiation, such as recombinant gene transfection, growth factors, and biomaterials. Among the various different types of stem cells, bone marrow-derived mesenchymal stem cells (BMSCs) have been investigated the most, while ligament stem progenitor cells (LDSCs) have demonstrated the best potential in generating tendon/ligament lineage cells. In the clinic, 4 relevant completed trials have been reported, but only one trial with BMSCs showed improved outcomes, while 5 relevant trials are still in progress. This review describes the process of ACL graft regeneration after implantation and summarizes the current application of stem cells from bench to bedside, as well as discusses future perspectives in this field.

Sustained release of collagen-affinity SDF-1α from book-shaped acellular fibrocartilage scaffold enhanced bone-tendon healing in a rabbit model

Rapid and functional bone-tendon (B-T) healing remains a difficulty in clinical practice. Tissue engineering has emerged as a promising strategy to address this problem. However, the majority of tissue engineering scaffolds are loaded with stem cells to enhance the regenerability in B-T healing, which is complicated and inconvenient for clinical application. Accordingly, developing a cell-free scaffold with chemotactic function and chondrogenic inducibility may be an effective approach. In this study, a collagen affinity peptide derived from the A3 domain of von Willebrand factor (a hemostasis factor) was fused into the C-terminal of a stromal cell-derived factor-1α (SDF-1α) to synthesize a recombinant SDF-1α capable of binding collagen and chemotactic activity. The recombinant SDF-1α was then tethered on the collagen fibers of a book-shaped acellular fibrocartilage scaffold (BAFS), thus fabricating a novel scaffold (C-SDF-1α/BAFS) with chemotactic function and chondrogenic inducibility. In vitro tests determined that this scaffold was noncytotoxic and biomimetic, could attract stem cells migrating to the scaffold using sustainably released C-SDF-1α, and inducedthe interacting stem cells down the chondrogenic lineage. In vivo, the C-SDF-1α/BAFS significantly enhanced the B-T healing in a rabbit partial patellectomy model, as shown by the larger cartilaginous metaplasia region, better fibrocartilage regeneration, additional bone formation, and improved biomechanical properties. Therefore, the findings of the study demonstrate that the C-SDF-1α/BAFS could potentially be applied for B-T healing.

Development of plasma functionalized polypropylene wound dressing for betaine hydrochloride controlled drug delivery on diabetic wounds

Diabetes Mellitus is one of the most worrying issues among illnesses, and its chronic subsequences almost refer to inflammations and infections. The loading and local release of antioxidants to wounds may decrease inflammations. However, the low wettability of PolyPropylene (PP) restricts the drug from loading. So, to increase the adhesion of PP for loading an optimum amount of Betaine Hydrochloride (BET), plasma has been applied in two steps of functionalization and polymerization, which has been confirmed with FE-SEM, ATR-FTIR, and EDX. The new chemistry of the surface led to almost 80% of BET loaded. The drug-releasing ratio studied by HPLC approved the presence of a PEG-like layer, which was coated by polymerization of tetraglyme. To evaluate the wound healing potential of the application of PP meshes treated by plasma, 72 Wistar rats were subdivided into four groups. The skin injury site was removed and underwent biomechanical tests, stereological analysis, and RNA extraction. The results showed a significant improvement in the polymerized scaffold containing BET for skin injury. The present study suggests that the use of a modified PP mesh can induce tissue regeneration and accelerate wound healing at the skin injury site.

Therapies with CCL25 require controlled release via microparticles to avoid strong inflammatory reactions

Background

Chemokine therapy with C–C motif chemokine ligand 25 (CCL25) is currently under investigation as a promising approach to treat articular cartilage degeneration. We developed a delayed release mechanism based on Poly (lactic-co-glycolic acid) (PLGA) microparticle encapsulation for intraarticular injections to ensure prolonged release of therapeutic dosages. However, CCL25 plays an important role in immune cell regulation and inflammatory processes like T-cell homing and chronic tissue inflammation. Therefore, the potential of CCL25 to activate immune cells must be assessed more thoroughly before further translation into clinical practice. The aim of this study was to evaluate the reaction of different immune cell subsets upon stimulation with different dosages of CCL25 in comparison to CCL25 released from PLGA particles.

Results

Immune cell subsets were treated for up to 5 days with CCL25 and subsequently analyzed regarding their cytokine secretion, surface marker expression, polarization, and migratory behavior. The CCL25 receptor C–C chemokine receptor type 9 (CCR9) was expressed to a different extent on all immune cell subsets. Direct stimulation of peripheral blood mononuclear cells (PBMCs) with high dosages of CCL25 resulted in strong increases in the secretion of monocyte chemoattractant protein-1 (MCP-1), interleukin-8 (IL-8), interleukin-1β (IL-1β), tumor-necrosis-factor-α (TNF-α) and interferon-γ (IFN-γ), upregulation of human leukocyte antigen-DR (HLA-DR) on monocytes and CD4⁺ T-cells, as well as immune cell migration along a CCL25 gradient. Immune cell stimulation with the supernatants from CCL25 loaded PLGA microparticles caused moderate increases in MCP-1, IL-8, and IL-1β levels, but no changes in surface marker expression or migration. Both CCL25-loaded and unloaded PLGA microparticles induced an increase in IL-8 and MCP-1 release in PBMCs and macrophages, and a slight shift of the surface marker profile towards the direction of M2-macrophage polarization.

Conclusions

While supernatants of CCL25 loaded PLGA microparticles did not provoke strong inflammatory reactions, direct stimulation with CCL25 shows the critical potential to induce global inflammatory activation of human leukocytes at certain concentrations. These findings underline the importance of a safe and reliable release system in a therapeutic setup. Failure of the delivery system could result in strong local and systemic inflammatory reactions that could potentially negate the benefits of chemokine therapy.

A Systematic Review of Tissue Engineering Scaffold in Tendon Bone Healing in vivo

Background: Tendon-bone healing is an important factor in determining the success of ligament reconstruction. With the development of biomaterials science, the tissue engineering scaffold plays an extremely important role in tendon-bone healing and bone tissue engineering. Materials and Methods: Electronic databases (PubMed, Embase, and the Web of Science) were systematically searched for relevant and qualitative studies published from 1 January 1990 to 31 December 2019. Only original articles that met eligibility criteria and evaluated the use of issue engineering scaffold especially biomaterials in tendon bone healing in vivo were selected for analysis. Results: The search strategy identified 506 articles, and 27 studies were included for full review including two human trials and 25 animal studies. Fifteen studies only used biomaterials like PLGA, collage, PCL, PLA, and PET as scaffolds to repair the tendon-bone defect, on this basis, the rest of the 11 studies using biological interventions like cells or cell factors to enhance the healing. The adverse events hardly ever occurred, and the tendon bone healing with tissue engineering scaffold was effective and superior, which could be enhanced by biological interventions. Conclusion: Although a number of tissue engineering scaffolds have been developed and applied in tendon bone healing, the researches are mainly focused on animal models which are with limitations in clinical application. Since the efficacy and safety of tissue engineering scaffold has been proved, and can be enhanced by biological interventions, substantial clinical trials remain to be done, continued progress in overcoming current tissue engineering challenges should allow for successful clinical practice.

PEGDA/HA mineralized hydrogel loaded with Exendin4 promotes bone regeneration in rat models with bone defects by inducing osteogenesis

Scaffolds with osteogenic differentiation function play an important role in the healing process of bone defects. Here, we designed a high strength Poly(ethyleneglycol) diacrylate/Hydroxyapatite (PEGDA/HA) mineralized hydrogel loaded with Exendin4 for inducing osteogenic differentiation. In this study, PEGDA hydrogel was prepared by photo initiating method. PEGDA/HA mineralized hydrogel was prepared by in-situ precipitation method, and Exendin4 was loaded by gel adsorption. The effects of different calcium and phosphorus concentrations on the strength and Exendin4 release of PEGDA/HA hydrogels were investigated. Rat models of bone defect were made and randomly divided into 5 groups. The experimental group was implanted with PEGDA hydrogel, Exendin4-PEGDA hydrogel, PEGDA/HA mineralized hydrogel, Exendin4-PEGDA/HA mineralized hydrogel, and no materials were implanted in the blank control group. Computed tomography (CT) and histology were observed 4 and 8 weeks after operation. Our results revealed that the PEGDA/HA mineralized hydrogel had porous structure, high mechanical strength and good biocompatibility. In vitro release test showed that the mineralized hydrogel exhibited good sustained release profile within 20 d. The animal experiments showed that the mineralized hydrogel accelerated the formation of new bone after 4 and 8 weeks, and formed a seamless union on the defected bone area after 8 weeks. In conclusions, The Exendin4-PEGDA/HA mineralized hydrogel can effectively repair bone defects in rats, and it is expected to be used as a biomaterial for human bone tissue repair.

Design and applications of protein delivery systems in nanomedicine and tissue engineering

Proteins are biological macromolecules involved in a wide range of biological functions, which makes them very appealing as therapeutics agents. Indeed, compared to small molecule drugs, their endogenous nature ensures their biocompatibility and biodegradability, they can be used in a large range of applications and present a higher specificity and activity. However, they suffer from unfolding, enzymatic degradation, short half-life and poor membrane permeability. To overcome such drawbacks, the development of protein delivery systems to protect, carry and deliver them in a controlled way have emerged importantly these last years. In this review, the formulation of a wide panel of protein delivery systems either in the form of polymer or inorganic nanoengineered colloids and scaffolds are presented and the protein loading and release mechanisms are addressed. A section is also dedicated to the detection of proteins and the characterization methods of their release. Then, the main protein delivery systems developed these last three years for anticancer, tissue engineering or diabetes applications are presented, as well as the major in vivo models used to test them. The last part of this review aims at presenting the perspectives of the field such as the use of protein-rich material or the sequestration of proteins. This part will also deal with less common applications and gene therapy as an indirect method to deliver protein.

Bioinspired Scaffold Designs for Regenerating Musculoskeletal Tissue Interfaces

The musculoskeletal system works at a very advanced level of synchrony, where all the physiological movements of the body are systematically performed through well-organized actions of bone in conjunction with all the other musculoskeletal soft tissues, such as ligaments, tendons, muscles, and cartilage through tissue-tissue interfaces. Interfaces are structurally and compositionally complex, consisting of gradients of extracellular matrix components, cell phenotypes as well as biochemical compositions and are important in mediating load transfer between the distinct orthopedic tissues during body movement. When an injury occurs at interface, it must be re-established to restore its function and stability. Due to the structural and compositional complexity found in interfaces, it is anticipated that they presuppose a concomitant increase in the complexity of the associated regenerative engineering approaches and scaffold designs to achieve successful interface regeneration and seamless integration of the engineered orthopedic tissues. Herein, we discuss the various bioinspired scaffold designs utilized to regenerate orthopedic tissue interfaces. First, we start with discussing the structure-function relationship at the interface. We then discuss the current understanding of the mechanism underlying interface regeneration, followed by discussing the current treatment available in the clinic to treat interface injuries. Lastly, we comprehensively discuss the state-of-the-art scaffold designs utilized to regenerate orthopedic tissue interfaces.

Bionic Silk Fibroin Film Promotes Tenogenic Differentiation of Tendon Stem/Progenitor Cells by Activating Focal Adhesion Kinase

Background

Tendon injuries are common musculoskeletal disorders in clinic. Due to the limited regeneration ability of tendons, tissue engineering technology is often used as an effective approach to treat tendon injuries. Silk fibroin (SF) films have excellent biological activities and physical properties, which is suitable for tendon regeneration. The present study is aimed at preparing a SF film with a bionic microstructure and investigating its biological effects.

Methods

A SF film with a smooth surface or bionic microstructure was prepared. After seeding tendon stem/progenitor cells (TSPCs) on the surface, the cell morphology, the expression level of tenogenic genes and proteins, and the focal adhesion kinase (FAK) activation were measured to evaluate the biological effect of SF films.

Results

The TSPCs on SF films with a bionic microstructure exhibited a slender cell morphology, promoted the expression of tenogenic genes and proteins, such as SCX, TNC, TNMD, and COLIA1, and activated FAK. FAK inhibitors blocked the enhanced expression of tenogenic genes and proteins.

Conclusion

SF films with a bionic microstructure may serve as a scaffold, provide biophysical cues to alter the cellular adherence arrangement and cell morphology, and enhance the tenogenic gene and protein expression in TSPCs. FAK activation plays a key role during this biological response process.

In vitro study of SDF-1α-loaded injectable and thermally responsive hydrogels for adipose stem cell therapy by SDF-1/CXCR4 axis

Stem cell-based approaches have become a promising therapeutic strategy for treating ischemic diseases. The aim of this study was to develop injectable hydrogel systems for the local release of stromal cell-derived factor-1α (SDF-1α) to recruit adipose stem cells (ASCs) that express CXCR4 to achieve stem cell therapy and therapeutic angiogenesis. Thermoresponsive and injectable chitosan (CS)/β-glycerophosphate disodium salt pentahydrate (βGP) hydrogels with different concentrations of hyaluronic acid (HA) were designed and fabricated to achieve local and sustained release of SDF-1α for ASC recruitment. Herein, the material structures, physical properties, gelation temperature, and gelation time of hydrogels with different compositions were determined. The incorporation of 0.9% HA in CS-based hydrogels not only enhanced the gelation time but also increased the strength of the hydrogels. In addition, the results revealed that the thermoresponsive and injectable CS/βGP/HA hydrogels showed good biocompatibility. In addition, the in vitro release profiles showed that the hydrogels achieved sustained release of SDF-1α over 7 days and enhanced ASC migration. The results revealed that the hydrogels with HA enhanced the sustained release effect compared with the hydrogel without HA, indicating that the HA content regulated the physical and release properties of the injectable hydrogels. Therefore, thermoresponsive and injectable CS/βGP/HA hydrogels may provide an alternative for treating ischemic diseases via SDF-1/CXCR4 axis for ASC recruitment and retention.

Polymer-Based Scaffold Strategies for Spinal Cord Repair and Regeneration

The injury to the spinal cord is among the most complex fields of medical development. Spinal cord injury (SCI) leads to acute loss of motor and sensory function beneath the injury level and is linked to a dismal prognosis. Currently, while a strategy that could heal the injured spinal cord remains unforeseen, the latest advancements in polymer-mediated approaches demonstrate promising treatment forms to remyelinate or regenerate the axons and to integrate new neural cells in the SCI. Moreover, they possess the capacity to locally deliver synergistic cells, growth factors (GFs) therapies and bioactive substances, which play a critical role in neuroprotection and neuroregeneration. Here, we provide an extensive overview of the SCI characteristics, the pathophysiology of SCI, and strategies and challenges for the treatment of SCI in a review. This review highlights the recent encouraging applications of polymer-based scaffolds in developing the novel SCI therapy.

Gradient Biomineralized Silk Fibroin Nanofibrous Scaffold with Osteochondral Inductivity for Integration of Tendon to Bone

Enthesis injury repair remains a huge challenge because of the unique biomolecular composition, microstructure, and mechanics in the interfacial region. Surgical reconstruction often creates new bone-scaffold interfaces with mismatched properties, resulting in poor osseointegration. To mimic the natural interface tissue structures and properties, we fabricated a nanofibrous scaffold with gradient mineral coating based on 10 × simulated body fluid (SBF) and silk fibroin (SF). We then characterized the physicochemical properties of the scaffold and evaluated its biological functions both in vitro and in vivo. The results showed that different areas of SF nanofibrous scaffold had varying levels of mineralization with disparate mechanical properties and had different effects on bone marrow mesenchymal stem cell growth and differentiation. Furthermore, the gradient scaffolds exhibited an enhancement of integration in the tendon-to-bone interface with a higher ultimate load and more fibrocartilage-like tissue formation. These findings demonstrate that the silk-based nanofibrous scaffold with gradient mineral coating can regulate the formation of interfacial tissue and has the potential to be applied in interface tissue engineering.

Functional decellularized fibrocartilaginous matrix graft for rotator cuff enthesis regeneration: A novel technique to avoid in-vitro loading of cells

Rapid and functional enthesis regeneration after rotator cuff tear (RCT) remains a challenge in clinic. Current tissue-engineering strategies for solving this challenge are focused on developing grafts with the mode of in-vitro loading cells on a scaffold. However, this mode is complicated and time-inefficient, moreover the preservation of this graft outside a cell incubator is highly inconvenient, thus limiting their clinical application. Developing a cell-free graft with chemotaxis to recruit postoperative injected cells may be a promising approach to solve these problems. Herein, we prepared a recombinant SDF-1α (termed as C-SDF-1α) capable of binding collagen and chemotaxis, which were then tethered on the collagen fibers of book-shaped decellularized fibrocartilage matrix (BDFM) to fabricate this cell-free graft (C-SDF-1α/BDFM). This C-SDF-1α/BDFM is noncytotoxicity and low-immunogenicity, allows synovium-derived mesenchymal stem cells (SMSCs) attachment and proliferation, and shows superior chondrogenic inducibility. More importantly, C-SDF-1α/BDFM released the tethered SDF-1α with a sustained release profile in-vitro and in-vivo, thus steadily recruiting chemokine (C-X-C motif) receptor 4 positive (CXCR4⁺) cells. Rats with RCT were repaired acutely with C-SDF-1α/BDFM together with postoperative CXCR4⁺SMSCs injection (C-SDF-1α/BDFM + CXCR4⁺SMSCs), BDFM in-vitro pre-loaded CXCR4⁺SMSCs (BDFM/CXCR4⁺SMSCs), or direct suture only (CTL). At postoperative 14-day, compared with BDFM/CXCR4⁺SMSCs, C-SDF-1α/BDFM + CXCR4⁺SMSCs showed a little more CXCR4⁺SMSCs at the healing site. At postoperative week 4 or 8, rats treated with C-SDF-1α/BDFM + CXCR4⁺SMSCs presented a similar RC healing quality as BDFM/CXCR4⁺SMSCs, both of which were significantly better than the CTL. Collectively, compared with conventional BDFM/CXCR4⁺SMSCs, C-SDF-1α/BDFM, as a cell-free graft with chemotaxis, could recruit postoperative injected CXCR4⁺cells into the healing site to participating RC healing, thus avoiding the complex process of in-vitro loading cells on a scaffold and necessitating immense care for the graft outside cell incubator, making it very convenient for clinical application.

Targeted drug delivery therapies inspired by natural taxes

A taxis is the movement responding to a stimulus of an organism. This behavior helps organisms to migrate, to find food or to avoid dangers. By mimicking and using natural taxes, many bio-inspired and bio-hybrid drug delivery systems have been synthesized. Under the guidance of physical and chemical stimuli, drug-loaded carriers are led to a target, for example tumors, then locally release the drug, inducing a therapeutic effect without influencing other parts of the body. On the other hand, for moving targets, for example metastasis cancer cells or bacteria, taking advantage of their taxes behavior is a solution to capture and to eliminate them. For instance, several traps and ecological niches have been fabricated to attract cancer cells by releasing chemokines. Cancer cells are then eliminated by drug loaded inside the trap, by radiotherapy focusing on the trap location or by simply removing the trap. Further research is needed to deeply understand the taxis behavior of organisms, which is essential to ameliorate the performance of taxes-inspired drug delivery application.

Artificial ligament made from silk protein/Laponite hybrid fibers

With developments in tissue engineering, artificial ligaments are expected to be future materials for anterior cruciate ligament (ACL) reconstruction. However, poor healing of the intraosseous part after ACL reconstruction significantly hinders their applications in this field. In this study, a bioactive clay Laponite (LAP) was introduced into the regenerated silk fibroin (RSF) spinning dope to produce functional RSF/LAP hybrid fibers by wet-spinning. These RSF/LAP hybrid fibers were then woven into artificial ligament for ACL reconstruction. The structure and mechanical properties of RSF/LAP hybrid fibers were extensively studied by different means. Results confirmed the presence of LAP in RSF fibers and revealed that the addition of LAP slightly deteriorated the comprehensive mechanical properties of RSF fibers. However, they were still much tougher (with higher breaking energy) than those of degummed natural silkworm silk that was earlier used for making artificial ligament. The artificial ligament woven from RSF/LAP hybrid fibers showed better cytocompatibility and osteogenic differentiation with mouse pre-osteoblasts in vitro than those made from degummed natural silkworm silks and pure RSF fibers. Furthermore, in vivo study in a rat ACL reconstruction model demonstrated that the presence of LAP in the artificial ligament could significantly enhance the graft osseointegration process and also improve the corresponding biomechanical properties of the artificial ligament. Based upon these results, the RSF/LAP hybrid fibers, which can be mass produced by wet-spinning process, are believed to have a great potential for use as artificial ligament materials for ACL reconstruction. STATEMENT OF SIGNIFICANCE: In this study, we successfully introduced Laponite (LAP), a kind of clay that has the function of osteogenic induction, into regenerated silk fibroin (RSF) fibers, which was prepared by a mature wet-spinning method developed in our lab. We believe that through artificial spinning, additional functional components can be added into RSF fibers, which one can hardly achieve with natural silks. We showed that the artificial ligament woven from RSF/LAP hybrid fibers had better cytocompatibility and osteogenic differentiation for mouse pre-osteoblasts in vitro, and significantly enhanced the graft osseointegration process and improved the corresponding biomechanical properties in a rat ACL reconstruction model in vivo, compared to those artificial ligaments made from degummed natural silkworm silks and pure RSF fibers.

Aerogel sponges of silk fibroin, hyaluronic acid and heparin for soft tissue engineering: Composition-properties relationship

This work aims to design biocompatible aerogel sponges that can host and control the release of stromal cell-derived factor-1α (SDF-1α or CXCL12), a key protein for applications ranging from regenerative medicine to cancer therapy (notably for neural tissues). Miscibility of silk fibroin (SF) and hyaluronic acid (HA) was investigated by means of fluorescence and scanning electron microscopy to identify processing conditions. Series of freeze-dried sponges were prepared by associating and cross-linking within the same 3D structure, HA, SF, poly-l-lysine (PLL) and heparin (hep). Aerogel sponges presented high swelling degree and porosity (∼90 %), adequate mean pore diameter (ca. 60 μm) and connectivity for welcoming cells, and a soft texture close to that of the brain (6-13 kPa Young's Modulus). Addition of SF yielded sponges with slower biodegradation. SF-HA and SF-HA-hep sponges retained 75 % and 93 % of the SDF-1α respectively after 7 days and were found to be cytocompatible in vitro.

Tendon and Ligament Healing and Current Approaches to Tendon and Ligament Regeneration

Ligament and tendon injuries are common problems in orthopedics. There is a need for treatments that can expedite nonoperative healing or improve the efficacy of surgical repair or reconstruction of ligaments and tendons. Successful biologically-based attempts at repair and reconstruction would require a thorough understanding of normal tendon and ligament healing. The inflammatory, proliferative, and remodeling phases, and the cells involved in tendon and ligament healing will be reviewed. Then, current research efforts focusing on biologically-based treatments of ligament and tendon injuries will be summarized, with a focus on stem cells endogenous to tendons and ligaments. Statement of clinical significance: This paper details mechanisms of ligament and tendon healing, as well as attempts to apply stem cells to ligament and tendon healing. Understanding of these topics could lead to more efficacious therapies to treat ligament and tendon injuries. © 2019 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 38:7-12, 2020.

Predicting degradation rate of genipin cross-linked gelatin scaffolds with machine learning

Genipin can improve weak mechanical properties and control high degradation rate of gelatin, as a cross-linker of gelatin which is widely used in tissue engineering. In this study, genipin cross-linked gelatin biodegradable porous scaffolds with different weight percentages of gelatin and genipin were prepared for tissue regeneration and measurement of their various properties including morphological characteristics, mechanical properties, swelling, degree of crosslinking and degradation rate. Results indicated that the sample containing the highest amount of gelatin and genipin had the highest degree of crosslinking and increasing the percentage of genipin from 0.125% to 0.5% enhances ultimate tensile strength (UTS) up to 113% and 92%, for samples with 2.5% and 10% gelatin, respectively. For these samples, increasing the percentage of genipin, reduce their degradation rate significantly with an average value of 124%. Furthermore, experimental data are used to develop a machine learning model, which compares artificial neural networks (ANN) and kernel ridge regression (KRR) to predict degradation rate of genipin-cross-linked gelatin scaffolds as a property of interest. The predicted degradation rate demonstrates that the ANN, with mean squared error (MSE) of 2.68%, outperforms the KRR with MSE = 4.78% in terms of accuracy. These results suggest that machine learning models offer an excellent prediction accuracy to estimate the degradation rate which will significantly help reducing experimental costs needed to carry out scaffold design.

Knitted Silk-Collagen Scaffold Incorporated with Ligament Stem/Progenitor Cells Sheet for Anterior Cruciate Ligament Reconstruction and Osteoarthritis Prevention

Current surgical management of anterior cruciate ligament (ACL) rupture still remains an intractable challenge in ACL regeneration due to the weak self-healing capability of ACL. Inadequate cell numbers and vascularization within the articular cavity contribute mainly to the poor prognosis. This time, we fabricated a new tissue engineering scaffold by adding ligament stem/progenitor cell (LSPC) sheets to our previous knitted silk-collagen sponge scaffold, which overcame these limitations by providing sufficient numbers of seed cells and a natural extracellular matrix to facilitate regeneration. LSPCs display excellent proliferation and multilineage differentiation capacity. Upon ectopic implantation, the knitted silk-collagen sponge scaffold incorporated with an LSPC sheet exhibited less immune cells but more fibroblast-like cells, deposited ECM and neovascularization, and better tissue ingrowth. In a rabbit model, we excised the ACL and performed a reconstructive surgery with our scaffold. Increased expression of ligament-specific genes and better collagen fibril formation could be observed after orthotopic transplantation. After 6 months, the LSPC sheet group showed better results on ligament regeneration and ligament-bone healing. Furthermore, no obvious cartilage and meniscus degeneration were observed at 6 months postoperation. In conclusion, these results indicated that the new tissue engineering scaffold can promote ACL regeneration and slow down the progression of osteoarthritis, thus suggesting its high clinical potential as an ideal graft in ACL reconstruction.

Reversing the Tumor Target: Establishment of a Tumor Trap

Despite the tremendous progress made in the field of cancer therapy in recent years, certain solid tumors still cannot be successfully treated. Alongside classical treatments in the form of chemotherapy and/or radiotherapy, targeted treatments such as immunotherapy that cause fewer side effects emerge as new options in the clinics. However, these alternative treatments may not be useful for treating all types of cancers, especially for killing infiltrative and circulating tumor cells (CTCs). Recent advances pursue the trapping of these cancer cells within a confined area to facilitate their removal for therapeutic and diagnostic purposes. A good understanding of the mechanisms behind tumor cell migration may drive the design of traps that mimic natural tumor niches and guide the movement of the cancer cells. To bring this trapping idea into reality, strong efforts are being made to create structured materials that imitate myelinated fibers, blood vessels, or pre-metastatic niches and incorporate chemical cues such as chemoattractants or adhesive proteins. In this review, the different strategies used (or could be used) to trap tumor cells are described, and relevant examples of their performance are analyzed.

Naturally-Derived Biomaterials for Tissue Engineering Applications

Naturally-derived biomaterials have been used for decades in multiple regenerative medicine applications. From the simplest cell microcarriers made of collagen or alginate, to highly complex decellularized whole-organ scaffolds, these biomaterials represent a class of substances that is usually first in choice at the time of electing a functional and useful biomaterial. Hence, in this chapter we describe the several naturally-derived biomaterials used in tissue engineering applications and their classification, based on composition. We will also describe some of the present uses of the generated tissues like drug discovery, developmental biology, bioprinting and transplantation.

Effect of Autologous Platelet-Rich Plasma and Gelatin Sponge for Tendon-to-Bone Healing After Rabbit Anterior Cruciate Ligament Reconstruction

PURPOSE

To investigate platelet-rich plasma (PRP) combined with gelatin sponge (GS) to improve tendon-bone interface healing and structure formation.

METHODS

Characterization of the GS scaffold was performed with a scanning electron microscope, and the release curve after loading with PRP was evaluated. A real-time reverse transcription quantitative polymerase chain reaction assay was performed to test the levels of tendon-to-bone healing-related gene expression. Finally, 18 New Zealand white rabbits were randomly divided into 3 groups and underwent semitendinosus autograft anterior cruciate ligament reconstruction: autograft group without PRP, PRP group, and PRP-GS group. All rabbits were killed 8 weeks after the operation. Magnetic resonance imaging scans, biomechanical testing, and histologic evaluation were performed.

RESULTS

An enzyme-linked immunosorbent assay and cell counting kit-8 assay showed that the GS could control the release of PRP and prolong its bioactivity time, as well as promote bone marrow mesenchymal stem cell proliferation. In the PRP-GS group, the levels of related genes were upregulated compared with the PRP group (P < .05). Lower signal in the magnetic resonance images indicated fibrocartilage formation in the 2 groups with PRP. In addition, histologic staining showed that the tendon-bone connection had a greater fibrocartilaginous transition region in the PRP-GS group, and the histologic scores were higher (vs the PRP group, P = .039). The maximum failure load and stiffness were higher in the PRP-GS group than in the other 2 groups.

CONCLUSIONS

GS loading with PRP could prolong the bioactivity time of PRP and promote bone marrow mesenchymal stem cell proliferation and osteogenic gene expression in vitro. It also promoted the early healing process at the tendon-bone junction in a rabbit anterior cruciate ligament reconstruction model.

CLINICAL RELEVANCE

GS is a natural material and offers satisfactory biocompatibility. Using GS as a scaffold to control the release of bioactive factors in bone tunnels may be useful, but additional studies in human subjects will be necessary to evaluate its clinical prospects.

Identification of endogenous migratory MSC-like cells and their interaction with the implant materials guiding osteochondral defect repair

Abundant BMSCs and MSC-like cells move up to the defect area and interact with the implant materials, guiding the osteochondral defect repair.