Preparation of NIR-responsive, ROS-generating and antibacterial black phosphorus quantum dots for promoting the MRSA-infected wound healing in diabetic rats

Current advances in black phosphorus-based antibacterial nanoplatform for infection therpy

Black phosphorus (BP) has attracted much attention due to its excellent physiochemical properties. However, due to its biodegradability and simple antibacterial mechanism, using only BP nanomaterials to combat bacterial infections caused by drug-resistant pathogens remains a significant challenge. In order to improve the antibacterial efficiency and avoid the emergence of drug resistance, BP nanomaterials have been combined with other functional materials to form black phosphorus-based antibacterial nanoplatform (BPANP), which provides unprecedented opportunities for the treatment of drug-resistant infections. This article reviews the performance of BPANP and its multiple antibacterial mechanisms while emphatically introducing its design direction and latest application progress in antibacterial fields. Moreover, this paper additionally summarizes and discusses the current challenges and inadequacies of BPANP that need to be improved in future research. We believe that this review will provide researchers with an up-to-date and multifaceted reference, and provide new ideas for designing effective strategies against drug-resistant bacteria.

Enhanced binding interaction and antibacterial inhibition for nanometal oxide particles activated with Aloe Vulgarize through one-pot ultrasonication techniques

The interaction of green zinc oxide nanoparticles (ZnO NPs) with bacterial strains are still scarcely reported. This work was conducted to study the green-one-pot-synthesized ZnO NPs from the Aloe Vulgarize (AV) leaf peel extract assisted with different sonication techniques followed by the physicochemical, biological activities and molecular docking studies. The NPs structure was analyzed using FTIR, UV-vis and EDX. The morphology, particle size and crystallinity of ZnO NPs were identified using FESEM and XRD. It was found that the formed flower-like structure with sharp edge and fine size of particulates in ZnO NPs/AV could enhance the bacterial inhibition. The minimum inhibitory concentration (MIC) for all the tested bacterial strains is at 3.125 µg/ml and the bacterial growth curve are dependent on the ZnO NPs dosage. The results of disc diffusion revealed that the ZnO NPs/AV possess better antibacterial effect with bigger ZOI due to the presence of AV active ingredient. The molecular docking between active ingredients of AV in the NPs with the protein of IFCM and 1MWU revealed that low binding energy (Ebind = -6.56 kcal/mol and -8.99 kcal/mol, respectively) attributes to the excessive hydrogen bond from AV that highly influenced their interaction with the amino acid of the selected proteins. Finally, the cytotoxicity test on the biosynthesized ZnO NPs with concentration below 20 µg/ml are found nontoxic on the HDF cell. Overall, ZnO NPs/20 % AV (probe sonication) is considered as the best synthesis option due to its efficient one-pot method, short sonication time but own the best antibacterial effect.

Photoresponsive Multirole Nanoweapon Camouflaged by Hybrid Cell Membrane Vesicles for Efficient Antibacterial Therapy of Pseudomonas aeruginosa-Infected Pneumonia and Wound

Exploring effective antibacterial approaches for targeted treatment of pathogenic bacterial infections with reduced drug resistance is of great significance. Combinational treatment modality that leverages different therapeutic components can improve the overall effectiveness and minimize adverse effects, thus displaying considerable potential against bacterial infections. Herein, red blood cell membrane fuses with macrophage membrane to develop hybrid cell membrane shell, which further camouflages around drug-loaded liposome to fabricate biomimetic liposome (AB@LRM) for precise antibacterial therapy. Specifically, photoactive agent black phosphorus quantum dots (BPQDs) and classical antibiotics amikacin (AM) are loaded in AB@LRM to accurately target the inflammatory sites through the guidance of macrophage membrane and long residence capability of red blood cell membrane, eventually exerting efficacious antibacterial activities. Besides, due to the excellent photothermal and photodynamic properties, BPQDs act as an efficient antibacterial agent when exposed to near-infrared laser irradiation, dramatically increasing the sensitivity of bacteria to antibiotics. Consequently, the synergistic sterilizing effect produced by AB@LRM further restricts bacterial resistance. Upon laser irradiation, AB@LRM shows superior anti-inflammatory and antibacterial properties in models of P. aeruginosa-infected pneumonia and wounds. Hence, this light-activatable antibacterial nanoplatform with good biocompatibility presents great potential to advance the clinical development in the treatment of bacterial infections.

Bletilla striata Polysaccharide-/Chitosan-Based Self-Healing Hydrogel with Enhanced Photothermal Effect for Rapid Healing of Diabetic Infected Wounds via the Regulation of Microenvironment

The management of diabetic ulcers poses a significant challenge worldwide, and persistent hyperglycemia makes patients susceptible to bacterial infections. Unfortunately, the overuse of antibiotics may lead to drug resistance and prolonged infections, contributing to chronic inflammation and hindering the healing process. To address these issues, a photothermal therapy technique was incorporated in the preparation of wound dressings. This innovative solution involved the formulation of a self-healing and injectable hydrogel matrix based on the Schiff base structure formed between the oxidized Bletilla striata polysaccharide (BSP) and hydroxypropyltrimethylammonium chloride chitosan. Furthermore, the introduction of CuO nanoparticles encapsulated in polydopamine imparted excellent photothermal properties to the hydrogel, which promoted the release of berberine (BER) loaded on the nanoparticles and boosted the antibacterial performance. In addition to providing a reliable physical protection to the wound, the developed hydrogel, which integrated the herbal components of BSP and BER, effectively accelerated wound closure via microenvironment regulation, including alleviated inflammatory reaction, stimulated re-epithelialization, and reduced oxidative stress based on the promising results from cell and animal experiments. These impressive outcomes highlighted their clinical potential in safeguarding the wound against bacterial intrusion and managing diabetic ulcers.

A win-win platform: Stabilized black phosphorous nanosheets loading gallium ions for enhancing the healing of bacterial-infected wounds through synergistic antibacterial approaches

Bacterial infection is the most common complication in wound healing, highlighting an urgent need for the development of innovative antibacterial technologies and treatments to address the growing threats posed by bacterial infections. Black phosphorus nanosheets (BPNSs), as a promising two-dimensional nanomaterial, have been utilized in treating infected wounds. However, BP's limited stability restricts its application. In this study, we enhance BP's stability and its antibacterial properties by anchoring gallium ions (Ga3+) onto BP's surface, creating a novel antibacterial platform. This modification reduces BP's electron density and enhances its antibacterial capabilities through a synergistic effect. Under near-infrared (NIR) irradiation, the BP/Ga3+ combination exerts antibacterial effects via photothermal therapy (PTT) and photodynamic therapy (PDT), while also releasing Ga3+. The Ga3+ employ a 'Trojan horse strategy' to disrupt iron metabolism, significantly boosting the antibacterial efficacy of the complex. This innovative material offers a viable alternative to antibiotics and holds significant promise for treating infected wounds and aiding skin reconstruction.

Dextran-Based Antibacterial Hydrogel Dressings for Accelerating Infected Wound Healing by Reducing Inflammation Levels

Infected wounds pose challenges such as exudate management, bacterial infections, and persistent inflammation, making them a significant challenge for modern dressings. To address these issues in infected wounds more effectively, aerogel-hydrogel biphase gels based on dextran are developed. The gel introduced in this study exhibits antibacterial and anti-inflammatory properties in the process of wound therapy, contributing to accelerated wound healing. The aerogel phase exhibits exceptional water-absorption capabilities, rapidly soaking up exudate from infected wound, thereby fostering a clean and hygienic wound healing microenvironment. Concurrently, the aerogel phase is enriched with hydrogen sulfide donors. Following water absorption and the formation of the hydrogel phase, it enables the sustained release of hydrogen sulfide around the wound sites. The experiments confirm that hydrogen sulfide, by promoting M2 macrophage differentiation and reducing the levels of inflammatory factors, effectively diminishes local inflammation levels at the wound site. Furthermore, the sodium copper chlorophyllin component within the hydrogel phase demonstrates effective antibacterial properties through photodynamic antimicrobial therapy, providing a viable solution to wound infection challenges.

Inhibitory effects of black phosphorus nanosheets on tumor cell proliferation through downregulation of ADIPOQ and downstream signaling pathways

Exposure to environmental pollutants, including nanomaterials, has a significant impact on tumor progression. The increased demand for black phosphorus nanosheets (BPNSs), driven by their exceptional properties, raises concerns about potential environmental contamination. Assessing their toxicity on tumor growth is essential. Herein, we employed a range of biological techniques, including cytotoxicity measurement, bioinformatics tools, proteomics, target gene overexpression, Western blot analysis, and apoptosis detection, to investigate the toxicity of BPNSs across A549, HepG-2, MCF-7, and Caco-2 cell lines. Our results demonstrated that BPNSs downregulated the expression of ADIPOQ and its associated downstream pathways, such as AMP-activated protein kinase (AMPK), nuclear factor erythroid 2-related factor 2 (Nrf2), and other unidentified pathways. These downregulated pathways ultimately led to mitochondria-dependent apoptosis. Notably, the specific downstream pathways involved varied depending on the type of tumors. These insightful findings not only confirm the consistent inhibitory effects of BPNSs across different tumor cells, but also elucidate the cytotoxicity mechanisms of BPNSs in different tumors, providing valuable information for their safe application and health risk assessment.

Enhancing Infected Diabetic Wound Healing through Multifunctional Nanocomposite-Loaded Microneedle Patch: Inducing Multiple Regenerative Sites

Infected diabetic wound (DW) presents a prolonged and challenging healing process within the field of regenerative medicine. The effectiveness of conventional drug therapies is hindered by their limited ability to reach deep tissues and promote adequate wound healing rates. Therefore, there is an imperative to develop drug delivery systems that can penetrate deep tissues while exhibiting multifunctional properties to expedite wound healing. In this study, w e devised a soluble microneedle (MN) patch made of γ-PGA, featuring multiple arrays, which w as loaded with core-shell structured nanoparticles (NPs) known as Ag@MSN@CeO2, to enhance the healing of infected DWs. The NP comprises a cerium dioxide (CeO2) core with anti-inflammatory and antioxidant properties, a mesoporous silica NP (MSN) shell with angiogenic characteristics, and an outermost layer doped with Ag to combat bacterial infections. W e demonstrated that the MN platform loaded with Ag@MSN@CeO2 successfully penetrated deep tissues for effective drug delivery. These MN tips induced the formation of multiple regenerative sites at various points, leading to antibacterial, reactive oxygen species-lowering, macrophage ecological niche-regulating, vascular regeneration-promoting, and collagen deposition-promoting effects, thus significantly expediting the healing process of infected DWs. Considering these findings, the multifunctional MN@Ag@MSN@CeO2 patch exhibits substantial potential for clinical applications in the treatment of infected DW.

An Injectable Black Phosphorus Hydrogel for Rapid Tooth Extraction Socket Healing

The excess production of reactive oxygen species (ROS) will delay tooth extraction socket (TES) healing. In this study, we developed an injectable thermosensitive hydrogel (NBP@BP@CS) used to treat TES healing. The hydrogel formulation incorporated black phosphorus (BP) nanoflakes, recognized for their accelerated alveolar bone regeneration and ROS-scavenging properties, and dl-3-n-butylphthalide (NBP), a vasodilator aimed at enhancing angiogenesis. In vivo investigations strongly demonstrated that NBP@BP@CS improved TES healing due to antioxidation and promotion of alveolar bone regeneration by BP nanoflakes. The sustained release of NBP from the hydrogel promoted neovascularization and vascular remodeling. Our results demonstrated that the designed thermosensitive hydrogel provided great opportunity not only for ROS elimination but also for the promotion of osteogenesis and angiogenesis, reflecting the "three birds with one stone" concept, and has tremendous potential for rapid TES healing.

Photothermal hydrogels for infection control and tissue regeneration

In this review, we report investigating photothermal hydrogels, innovative biomedical materials designed for infection control and tissue regeneration. These hydrogels exhibit responsiveness to near-infrared (NIR) stimulation, altering their structure and properties, which is pivotal for medical applications. Photothermal hydrogels have emerged as a significant advancement in medical materials, harnessing photothermal agents (PTAs) to respond to NIR light. This responsiveness is crucial for controlling infections and promoting tissue healing. We discuss three construction methods for preparing photothermal hydrogels, emphasizing their design and synthesis, which incorporate PTAs to achieve the desired photothermal effects. The application of these hydrogels demonstrates enhanced infection control and tissue regeneration, supported by their unique photothermal properties. Although research progress in photothermal hydrogels is promising, challenges remain. We address these issues and explore future directions to enhance their therapeutic potential.

Deep Eutectic Solvent Eutectogels for Delivery of Broad-Spectrum Antimicrobials

Gel-based wound dressings have gained popularity within the healthcare industry for the prevention and treatment of bacterial and fungal infections. Gels based on deep eutectic solvents (DESs), known as eutectogels, provide a promising alternative to hydrogels as they are non-volatile and highly tunable and can solubilize therapeutic agents, including those insoluble in hydrogels. A choline chloride:glycerol-cellulose eutectogel was loaded with numerous antimicrobial agents including silver nanoparticles, black phosphorus nanoflakes, and commercially available pharmaceuticals (octenidine dihydrochloride, tetracycline hydrochloride, and fluconazole). The eutectogels caused >97% growth reduction in Gram-positive methicillin-resistant Staphylococcus aureus and Gram-negative Pseudomonas aeruginosa bacteria and the fungal species Candida albicans.

The synergetic effect of alginate-derived hydrogels and metal-phenolic nanospheres for chronic wound therapy

Management of diabetic wounds presents a global health challenge due to elevated levels of ROS in the wound microenvironment, persistent dysregulation of inflammation modulation, and limitations in commercially available dressings. Addressing this issue, we have developed a pH-responsive and glucose-sensitive multifunctional hydrogel dressing that dynamically responds to the wound microenvironment and enables on-demand drug release. The dressing incorporates a matrix material based on aminophenylboronic acid-functionalized alginate and a polyhydroxy polymer, alongside an enhancer phase consisting of self-assembled metal-phenol coordination nanospheres formed by tannic acid and iron ions. Using the dynamic borate ester bonds and catechol-metal ion coordination bonds, the dressing exhibits remarkable shape adaptability, self-healing capability, tissue adhesiveness, antioxidant activity, and photothermal responsiveness, without additional curatives or crosslinking agents. As a wound dressing, it elicits macrophage polarization towards an anti-inflammatory phenotype while maintaining long-lasting antimicrobial effects. In a diabetic mouse model of full-thickness wound infections, it effectively mitigated inflammation and vascular damage, significantly expediting the wound healing process with a commendable 97.7% wound closure rate. This work provides a new direction for developing multifunctional smart hydrogel dressings that can accelerate diabetic wound healing for human health.

Advances in the Application of Black Phosphorus-Based Composite Biomedical Materials in the Field of Tissue Engineering

Black Phosphorus (BP) is a new semiconductor material with excellent biocompatibility, degradability, and optical and electrophysical properties. A growing number of studies show that BP has high potential applications in the biomedical field. This article aims to systematically review the research progress of BP composite medical materials in the field of tissue engineering, mining BP in bone regeneration, skin repair, nerve repair, inflammation, treatment methods, and the application mechanism. Furthermore, the paper discusses the shortcomings and future recommendations related to the development of BP. These shortcomings include stability, photothermal conversion capacity, preparation process, and other related issues. However, despite these challenges, the utilization of BP-based medical materials holds immense promise in revolutionizing the field of tissue repair.

Multifunctional PtCuTe Nanosheets with Strong ROS Scavenging and ROS-Independent Antibacterial Properties Promote Diabetic Wound Healing

Nanozymes, as one of the most efficient reactive oxygen species (ROS)-scavenging biomaterials, are receiving wide attention in promoting diabetic wound healing. Despite recent attempts at improving the catalytic efficiency of Pt-based nanozymes (e.g., PtCu, one of the best systems), they still display quite limited ROS scavenging capacity and ROS-dependent antibacterial effects on bacteria or immunocytes, which leads to uncontrolled and poor diabetic wound healing. Hence, a new class of multifunctional PtCuTe nanosheets with excellent catalytic, ROS-independent antibacterial, proangiogenic, anti-inflammatory, and immuno-modulatory properties for boosting the diabetic wound healing, is reported. The PtCuTe nanosheets show stronger ROS scavenging capacity and better antibacterial effects than PtCu. It is also revealed that the PtCuTe can enhance vascular tube formation, stimulate macrophage polarization toward the M2 phenotype and improve fibroblast mobility, outperforming conventional PtCu. Moreover, PtCuTe promotes crosstalk between different cell types to form a positive feedback loop. Consequently, PtCuTe stimulates a proregenerative environment with relevant cell populations to ensure normal tissue repair. Utilizing a diabetic mouse model, it is demonstrated that PtCuTe significantly facilitated the regeneration of highly vascularized skin, with the percentage of wound closure being over 90% on the 8th day, which is the best among the reported comparable multifunctional biomaterials.

Bioactive self-healing umbilical cord blood exosomes hydrogel for promoting chronic diabetic wound healing

The deleterious effects of diabetes mellitus on wound healing have become a major public health concern worldwide. Given the complex microenvironment of diabetic wounds and the high prevalence of diabetes, the design and development of novel wound dressing materials with versatile capabilities is urgent. Extracellular vesicles (EVs) derived from human umbilical cord blood have demonstrated the potential to counter inflammation and accelerate wound healing. Herein, we explored the efficacy of incorporating human umbilical cord blood-derived exosomes (UCB-Exos) into an ABA-type amphiphilic hydrogel, which possesses the attributes of exosome (Exo) encapsulation, temperature-triggered reversible sol-gel conversion, and Exo-regulated release, for enhancing the stability and retention of Exos. We sought to examine the feasibility of this strategy in augmenting the therapeutic efficacy of UCB-Exos for the healing of diabetes-related wounds. The injectable hydrogel was conveniently applied directly onto the wound surface and the enclosed Exo significantly facilitated the healing process, resulting in faster wound closure, enhanced collagen deposition, accelerated re-epithelialization, and enhanced neo-vascularization within two weeks compared with the hydrogel-only treatment group. In summary, some hydrogels hold great promise for promoting wound healing in diabetics and represent a novel therapeutic option for diabetes-related ulcers.

ROS-scavenging materials for skin wound healing: advancements and applications

The intricate healing process of skin wounds includes a variety of cellular and molecular events. Wound healing heavily relies on reactive oxygen species (ROS), which are essential for controlling various processes, including inflammation, cell growth, angiogenesis, granulation, and the formation of extracellular matrix. Nevertheless, an overabundance of reactive oxygen species (ROS) caused by extended oxidative pressure may result in the postponement or failure of wound healing. It is crucial to comprehend the function of reactive oxygen species (ROS) and create biomaterials that efficiently eliminate ROS to enhance the healing process of skin wounds. In this study, a thorough examination is presented on the role of reactive oxygen species (ROS) in the process of wound healing, along with an exploration of the existing knowledge regarding biomaterials employed for ROS elimination. In addition, the article covers different techniques and substances used in the management of skin wound. The future prospects and clinical applications of enhanced biomaterials are also emphasized, highlighting the potential of biomaterials that scavenge active oxygen to promote skin repair. This article seeks to enhance the understanding of the complex processes of ROS in the healing of wounds and the application of ROS-scavenging materials. Its objective is to create novel strategies for effective treatment skin wounds.

Black Phosphorus - A Rising Star in the Antibacterial Materials

Antibiotics are the most commonly used means to treat bacterial infection at present, but the unreasonable use of antibiotics induces the generation of drug-resistant bacteria, which causes great problems for their clinical application. In recent years, researchers have found that nanomaterials with high specific surface area, special structure, photocatalytic activity and other properties show great potential in bacterial infection control. Among them, black phosphorus (BP), a two-dimensional (2D) nanomaterial, has been widely reported in the treatment of tumor and bone defect due to its excellent biocompatibility and degradability. However, the current theory about the antibacterial properties of BP is still insufficient, and the relevant mechanism of action needs to be further studied. In this paper, we introduced the structure and properties of BP, elaborated the mechanism of BP in bacterial infection, and systematically reviewed the application of BP composite materials in the field of antibacterial. At the same time, we also discussed the challenges faced by the current research and application of BP, which laid a solid theoretical foundation for the further study of BP in the future.

Precise antibacterial therapeutics based on stimuli-responsive nanomaterials

Bacterial infection refers to the process in which bacteria invade, grow, reproduce, and interact with the body, ultimately causing a series of pathological changes. Nowadays, bacterial infection remains a significant public health issue, posing a huge threat to human health and a serious financial burden. In the post-antibiotic era, traditional antibiotics are prone to inducing bacterial resistance and difficulty in removing bacterial biofilm. In recent years, antibacterial therapy based on nanomaterials has developed rapidly. Compared with traditional antibiotics, nanomaterials effectively remove bacterial biofilms and rarely result in bacterial resistance. However, due to nanomaterials' strong permeability and effectiveness, they will easily cause cytotoxicity when they are not controlled. In addition, the antibacterial effect of non-responsive nanomaterials cannot be perfectly exerted since the drug release property or other antibacterial effects of these nano-materials are not be positively correlated with the intensity of bacterial infection. Stimuli-responsive antibacterial nanomaterials are a more advanced and intelligent class of nano drugs, which are controlled by exogenous stimuli and microenvironmental stimuli to change the dosage and intensity of treatment. The excellent spatiotemporal controllability enables stimuli-responsive nanomaterials to treat bacterial infections precisely. In this review, we first elaborate on the design principles of various stimuli-responsive antibacterial nanomaterials. Then, we analyze and summarizes the antibacterial properties, advantages and shortcomings of different applied anti-bacterial strategies based on stimuli-responsive nanomaterials. Finally, we propose the challenges of employing stimuli-responsive nanomaterials and corresponding potential solutions.

Nanofibrous Dressing with Nanocomposite Monoporous Microspheres for Chemodynamic Antibacterial Therapy and Wound Healing

The excessive use of antibiotics and consequent bacterial resistance have emerged as crucial public safety challenges for humanity. As a promising antibacterial treatment, using reactive oxygen species (ROS) can effectively address this problem and has the advantages of being highly efficient and having low toxicity. Herein, electrospinning and electrospraying were employed to fabricate magnesium oxide (MgO)-based nanoparticle composited polycaprolactone (PCL) nanofibrous dressings for the chemodynamic treatment of bacteria-infected wounds. By utilizing electrospraying, erythrocyte-like monoporous PCL microspheres incorporating silver (Ag)- and copper (Cu)-doped MgO nanoparticles were generated, and the unique microsphere-filament structure enabled efficient anchoring on nanofibers. The composite dressings produced high levels of ROS, as confirmed by the 2,7-dichloriflurescin fluorescent probe. The sustained generation of ROS resulted in efficient glutathione oxidation and a remarkable bacterial killing rate of approximately 99% against Staphylococcus aureus (S. aureus). These dressings were found to be effective at treating externally infected wounds. The unique properties of these composite nanofibrous dressings suggest great potential for their use in the medical treatment of bacteria-infected injuries.

Black Phosphorus/MnO2 Nanocomposite Disrupting Bacterial Thermotolerance for Efficient Mild-Temperature Photothermal Therapy

The emergence of multi-drug resistant (MDR) pathogens is a major public health concern, posing a substantial global economic burden. Photothermal therapy (PTT) at mild temperature presents a promising alternative to traditional antibiotics due to its biological safety and ability to circumvent drug resistance. However, the efficacy of mild PTT is limited by bacterial thermotolerance. Herein, a nanocomposite, BP@Mn-NC, comprising black phosphorus nanosheets and a manganese-based nanozyme (Mn-NZ) is developed, which possesses both photothermal and catalytic properties. Mn-NZ imparts glucose oxidase- and peroxidase-like properties to BP@Mn-NC, generating reactive oxygen species (ROS) that induce lipid peroxidation and malondialdehyde accumulation across the bacterial cell membrane. This process disrupts unprotected respiratory chain complexes exposed on the bacterial cell membrane, leading to a reduction in the intracellular adenosine triphosphate (ATP) content. Consequently, mild PTT mediated by BP@Mn-NC effectively eliminates MDR infections by specifically impairing bacterial thermotolerance because of the dependence of bacterial heat shock proteins (HSPs) on ATP molecules for their proper functioning. This study paves the way for the development of a novel photothermal strategy to eradicate MDR pathogens, which targets bacterial HSPs through ROS-mediated inhibition of bacterial respiratory chain activity.

Diverse Antibacterial Treatments beyond Antibiotics for Diabetic Foot Ulcer Therapy

Diabetic foot ulcer (DFU), a common complication of diabetes, has become a great burden to both patients and the society. The delayed wound closure of ulcer sites resulting from vascular damage and neutrophil dysfunction facilitates bacterial infection. Once drug resistance occurs or bacterial biofilm is formed, conventional therapy tends to fail and amputation is unavoidable. Therefore, effective antibacterial treatment beyond antibiotics is of utmost importance to accelerate the wound healing process and prevent amputation. Considering the complexity of multidrug resistance, biofilm formation, and special microenvironments (such as hyperglycemia, hypoxia, and abnormal pH value) at the infected site of DFU, several antibacterial agents and different mechanisms have been explored to achieve the desired outcome. The present review focuses on the recent progress of antibacterial treatments, including metal-based medications, natural and synthesized antimicrobial peptides, antibacterial polymers, and sensitizer-based therapy. This review provides a valuable reference for the innovation of antibacterial material design for DFU therapy.

Hyaluronic acid/alginate-based biomimetic hydrogel membranes for accelerated diabetic wound repair

The study aims to develop a new multifunctional biopolymer-based hydrogel membrane dressing by adopting a solvent casting method for the controlled release of cefotaxime sodium at the wound site. Sodium alginate enhances collagen production in the skin, which provides tensile strength to healing tissue. Moreover, the significance of extracellular molecules such as hyaluronic acid in the wound the healing cascade renders these biopolymers an essential ingredient for the fabrication of hydrogel membranes via physical crosslinking (hydrogen bonding). These membranes were further investigated in terms of their structure, and surface morphology, as well as cell viability analysis. A membrane with the most suitable characteristics was chosen as a candidate for cefotaxime sodium loading and in vivo analysis. Results show that the 3D porous nature of developed membranes allows optimum water vapor and oxygen transmission (>8.21 mg/mL) to divert excessive wound exudate away from the diabetic wound bed, MTT assay confirmed cell viability at more than 80%. In vivo results confirmed that the CTX-HA-Alg-PVA hydrogel group showed rapid wound healing with accelerated re-epithelization and a decreased inflammatory response. Conclusively, these findings indicate that CTX-HA-Alg-PVA hydrogel membranes exhibit a suitable niche for use as dressing membranes for healing of diabetic wounds.

Current status and progress in research on dressing management for diabetic foot ulcer

Diabetic foot ulcer (DFU) is a major complication of diabetes and is associated with a high risk of lower limb amputation and mortality. During their lifetime, 19%-34% of patients with diabetes can develop DFU. It is estimated that 61% of DFU become infected and 15% of those with DFU require amputation. Furthermore, developing a DFU increases the risk of mortality by 50%-68% at 5 years, higher than some cancers. Current standard management of DFU includes surgical debridement, the use of topical dressings and wound decompression, vascular assessment, and glycemic control. Among these methods, local treatment with dressings builds a protective physical barrier, maintains a moist environment, and drains the exudate from DFU wounds. This review summarizes the development, pathophysiology, and healing mechanisms of DFU. The latest research progress and the main application of dressings in laboratory and clinical stage are also summarized. The dressings discussed in this review include traditional dressings (gauze, oil yarn, traditional Chinese medicine, and others), basic dressings (hydrogel, hydrocolloid, sponge, foam, film agents, and others), bacteriostatic dressings, composite dressings (collagen, nanomaterials, chitosan dressings, and others), bioactive dressings (scaffold dressings with stem cells, decellularized wound matrix, autologous platelet enrichment plasma, and others), and dressings that use modern technology (3D bioprinting, photothermal effects, bioelectric dressings, microneedle dressings, smart bandages, orthopedic prosthetics and regenerative medicine). The dressing management challenges and limitations are also summarized. The purpose of this review is to help readers understand the pathogenesis and healing mechanism of DFU, help physicians select dressings correctly, provide an updated overview of the potential of biomaterials and devices and their application in DFU management, and provide ideas for further exploration and development of dressings. Proper use of dressings can promote DFU healing, reduce the cost of treating DFU, and reduce patient pain.

Homogeneous silver nanoparticle loaded polydopamine/polyethyleneimine-coated bacterial cellulose nanofibers for wound dressing

Utilizing mussel-inspired chemistry is an advanced strategy for surface modification, because dopamine (DA) can form a material-independent adhesive coating and further functionalization can be achieved, including the production of silver nanoparticles (AgNPs). Nevertheless, DA easily aggregates in the nanofiber network structure of bacterial cellulose (BC), which not only blocks the pores in the BC structure but also leads to the formation of large silver particles and the burst release of highly cytotoxic silver ions. Herein, a homogeneous AgNP-loaded polydopamine (PDA)/polyethyleneimine (PEI) coated BC was constructed via a Michael reaction between PDA and PEI. Under the action of PEI, the PDA/PEI coating was uniformly attached to the BC fiber surface with a thickness of approximately 4 nm, and homogeneous AgNPs were produced on the uniform PDA/PEI/BC (PPBC) fiber surface. The sustained release of silver ions was better from AgNPs@PPBC than from AgNPs@PDA/BC. The obtained AgNPs@PPBC exhibited excellent antibacterial activities and cytocompatibility. The results of the in vivo assay indicated that the AgNPs@PPBC dressing could inhibit S. aureus infection and inflammation, promote hair follicle growth, enhance collagen deposition, and accelerate wound healing within 12 days compared with BC. These results illustrate that the homogeneous AgNPs@PPBC dressing has great potential for treating infected wounds.

Multifunctional chondroitin sulfate based hydrogels for promoting infected diabetic wounds healing by chemo-photothermal antibacterial and cytokine modulation

Diabetic foot (DF) is difficult to heal due to the formation of drug-resistant bacterial biofilms and dysregulation of the wound microenvironment. To solve this problem, multifunctional hydrogels were prepared by in situ or spraying with 3-aminophenylboronic acid modified oxidized chondroitin sulfate (APBA-g-OCS), polyvinyl alcohol (PVA) and black phosphorus/bismuth oxide/ε-polylysine (BP/Bi₂O₃/ε-PL) as precursors for promoting infected diabetic wounds healing. The hydrogels display multiple stimulus responsiveness, strong adhesion and rapid self-healing ability owing to the dynamic borate ester bonds, hydrogen bonds and π-π conjugation cross-link points, remain synergistic chemo-photothermal antibacterial effect and anti-biofilm formation ability due to the doping of BP/ Bi₂O₃/ε-PL into the hydrogel by dynamic imine bonds crosslinking and possess anti-oxidation and inflammatory chemokine adsorption ability attributing to the presence of APBA-g-OCS. Most importantly, as a result of the above functions, the hydrogels can not only respond to the wound microenvironment to conduct combined PTT and chemotherapy for efficient anti-inflammation, but also improve the wound microenvironment by scavenging ROS and regulating the expression of cytokines, thus further accelerating collagen deposition, promoting granulation tissue formation and angiogenesis, finally promoting the healing of infected wounds in diabetic rats.

Preparation of photothermal responsive, antibacterial hydrogel by using PVA-Alg and silver nanofibers as building blocks

Introduction: Photothermal responsive, antimicrobial hydrogels are very attractive and have great potential in the field of tissue engineering. The defective wound environment and metabolic abnormalities in diabetic skin would lead to bacterial infections. Therefore, multifunctional composites with antimicrobial properties are urgently needed to improve the current therapeutic outcomes of diabetic wounds. We prepared an injectable hydrogel loaded with silver nanofibers for efficient and sustained bactericidal activity. Methods: To construct this hydrogel with good antimicrobial activity, homogeneous silver nanofibers were first prepared by solvothermal method and then dispersed in PVA-lg solution. After homogeneous mixing and gelation, injectable hydrogels (Ag@H) wrapped with silver nanofibers were obtained. Results: By virtue of Ag nanofibers, Ag@H exhibited good photothermal conversion efficiency and good antibacterial activity against drug-resistant bacteria, while the in vivo antibacterial also showed excellent performance. The results of antibacterial experiments showed that Ag@H had significant bactericidal effects on MRSA and E. coli with 88.4% and 90.3% inhibition rates, respectively. Discussion: The above results indicate that Ag@H with photothermal reactivity and antibacterial activity is very promising for biomedical applications, such as wound healing and tissue engineering.

Antibacterial PLA/Mg composite with enhanced mechanical and biological performance for biodegradable orthopedic implants

Biodegradability, bone-healing rate, and prevention of bacterial infection are critical factors for orthopedic implants. Polylactic acid (PLA) is a good candidate biodegradable material; however, it has insufficient mechanical strength and bioactivity for orthopedic implants. Magnesium (Mg), has good bioactivity, biodegradability, and sufficient mechanical properties, similar to that of bone. Moreover, Mg has an inherent antibacterial property via a photothermal effect, which generates localized heat, thus preventing bacterial infection. Therefore, Mg is a good candidate material for PLA composites, to improve their mechanical and biological performance and add an antibacterial property. Herein, we fabricated an antibacterial PLA/Mg composite for enhanced mechanical and biological performance with an antibacterial property for application as biodegradable orthopedic implants. The composite was fabricated with 15 and 30 vol% of Mg homogeneously dispersed in PLA without the generation of a defect using a high-shear mixer. The composites exhibited an enhanced compressive strength of 107.3 and 93.2 MPa, and stiffness of 2.3 and 2.5 GPa, respectively, compared with those of pure PLA which were 68.8 MPa and 1.6 GPa, respectively. Moreover, the PLA/Mg composite at 15 vol% Mg exhibited significant improvement of biological performance in terms of enhanced initial cell attachment and cell proliferation, whereas the composite at 30 vol% Mg showed deteriorated cell proliferation and differentiation because of the rapid degradation of the Mg particles. In turn, the PLA/Mg composites exerted an antibacterial effect based on the inherent antibacterial property of Mg as well as the photothermal effect induced by near-infrared (NIR) treatment, which can minimize infection after implantation surgery. Therefore, antibacterial PLA/Mg composites with enhanced mechanical and biological performance may be a candidate material with great potential for biodegradable orthopedic implants.

Photocatalytic oxygen evolution and antibacterial biomimetic repair membrane for diabetes wound repair via HIF1-α pathway

Diabetic wounds always have puzzled patients and caused serious social problems. Due to the lack of local blood vessels, severe hypoxia is generated in the defect area, which is an essential reason for the difficulty of wound healing. We have constructed a photocatalytic oxygen evolution and antibacterial biomimetic repair membrane to solve the problems of wound repair. A scanning electron microscope and transmission electron microscope characterized the biomimetic repair membrane. The oxygen evolution of the biomimetic membrane was tested by an oxygen meter. The excellent antibacterial performance of the biomimetic repair membrane was also verified by co-culture with Staphylococcus aureus and Escherichia coli. It was confirmed that the expression of collagen and HIF1-α in fibroblasts was significantly increased in vitro. And the mitochondrial activity of the vascular and nerve was increased considerably. In vivo, the healing time of diabetes wounds treated with the biomimetic repair membrane was significantly reduced, the collagen and the number of pores were increased considerably, and vascular regeneration was enhanced. The biomimetic repair membrane has an excellent performance in photocatalytic oxygen evolution and antibacterial and can significantly promote the repair of diabetes wounds. This will provide a promising treatment for diabetes wound repair.

Trends in Photothermal Nanostructures for Antimicrobial Applications

The rapid development of antimicrobial resistance due to broad antibiotic utilisation in the healthcare and food industries and the non-availability of novel antibiotics represents one of the most critical public health issues worldwide. Current advances in nanotechnology allow new materials to address drug-resistant bacterial infections in specific, focused, and biologically safe ways. The unique physicochemical properties, biocompatibility, and wide range of adaptability of nanomaterials that exhibit photothermal capability can be employed to develop the next generation of photothermally induced controllable hyperthermia as antibacterial nanoplatforms. Here, we review the current state of the art in different functional classes of photothermal antibacterial nanomaterials and strategies to optimise antimicrobial efficiency. The recent achievements and trends in developing photothermally active nanostructures, including plasmonic metals, semiconductors, and carbon-based and organic photothermal polymers, and antibacterial mechanisms of action, including anti-multidrug-resistant bacteria and biofilm removal, will be discussed. Insights into the mechanisms of the photothermal effect and various factors influencing photothermal antimicrobial performance, emphasising the structure-performance relationship, are discussed. We will examine the photothermal agents' functionalisation for specific bacteria, the effects of the near-infrared light irradiation spectrum, and active photothermal materials for multimodal synergistic-based therapies to minimise side effects and maintain low costs. The most relevant applications are presented, such as antibiofilm formation, biofilm penetration or ablation, and nanomaterial-based infected wound therapy. Practical antibacterial applications employing photothermal antimicrobial agents, alone or in synergistic combination with other nanomaterials, are considered. Existing challenges and limitations in photothermal antimicrobial therapy and future perspectives are presented from the structural, functional, safety, and clinical potential points of view.

Versatile Hydrogel Dressing with Skin Adaptiveness and Mild Photothermal Antibacterial Activity for Methicillin-Resistant Staphylococcus Aureus-Infected Dynamic Wound Healing

Bacterial infection often induces chronic repair of wound healing owing to aggravated inflammation. Hydrogel dressing exhibiting intrinsic antibacterial activity may substantially reduce the use of antibiotics for infected wound management. Hence, a versatile hydrogel dressing (rGB/QCS/PDA-PAM) exhibiting skin adaptiveness on dynamic wounds and  mild photothermal antibacterial activity is developed for safe and efficient infected wound treatment. Phenylboronic acid-functionalized graphene (rGB) and oxadiazole-decorated quaternary carboxymethyl chitosan (QCS) are incorporated into a polydopamine-polyacrylamide (PDA-PAM) network with multiple covalent and noncovalent bonds, which conferred the hydrogel with flexible mechanical properties, strong tissue adhesion and excellent self-healing ability on the dynamic wounds. Moreover, the glycocalyx-mimicking phenylboronic acid on the surface of rGB enables the hydrogel to specifically capture bacteria. The enhanced membrane permeability of QCS enhanced bacterial vulnerability to photothermal therapy（PTT）, which is demonstrated by efficient mild PTT antibacteria against methicillin-resistant Staphylococcus aureus in vitro and in vivo at temperatures of <49.6 °C. Consequently, the hydrogel demonstrate accelerated tissue regeneration on MRSA-infected wound in vivo, with an intact epidermis, abundant collagen deposition and prominent angiogenesis. Therefore, rGB/QCS/PDA-PAM is a versatile hydrogel dressing exhibiting inherent antibacterial activity and has considerable potential in treating wounds infected with drug-resistant bacteria.

Transcriptome Analysis Reveals the Growth Promotion Mechanism of Enteropathogenic Escherichia coli Induced by Black Phosphorus Nanosheets

With the extensive production and application of black phosphorus (BP) nanosheets, release to the environment is inevitable, which raises concerns about the fate and effects of this two-dimensional (2D) material on sensitive receptors such as environmental microbes. Although the bacterial toxicity of BP nanosheets has been demonstrated, whether the biological response differs in pathogenic and nonpathogenic strains of a microorganism is unknown. Here, enteropathogenic Escherichia coli (EPEC) and nonpathogenic Escherichia coli DH5α (E. coli DH5α), Escherichia coli k12 (E. coli k12), and Bacillus tropicus (B. tropicus) are used to comparatively study the microbial toxicity of BP nanosheets. Upon exposure to BP nanosheets across a range of doses from 10 to 100 μg mL^-1 for 12 h, EPEC experienced enhanced growth and E. coli DH5α and E. coli k12 were not affected, whereas B. tropicus exhibited clear toxicity. By combining transcriptome sequencing, proteome analysis, and other sensitive biological techniques, the mechanism of BP-induced growth promotion for EPEC was uncovered. Briefly, BP nanosheets activate the antioxidation system to resist oxidative stress, promote protein synthesis and secretion to attenuate membrane damage, enhance the energy supply, and activate growth-related pathways. None of these impacts were evident with nonpathogenic strains. By describing the mechanism of strain-dependent microbial effects, this study not only highlights the potential risks of BP nanosheets to the environment and to human health but also calls attention to the importance of model strain selection when evaluating the hazard and toxicity of emerging nanomaterials.

Photonics-based treatments: Mechanisms and applications in oral infectious diseases

Infectious diseases remain a serious global challenge threatening human health. Oral infectious diseases, a major neglected global problem, not only affect people's lifestyles but also have an intimate association with systemic diseases. Antibiotic therapy is a common treatment. However, the emergence of new resistance problems hindered and enhanced the complication of the treatment. Currently, antimicrobial photodynamic therapy (aPDT) has long been the topic of intense interest due to the advantage of being minimally invasive, low toxicity, and high selectivity. aPDT is also becoming increasingly popular and applied in treating oral diseases such as tooth caries, pulpitis, periodontal diseases, peri-implantitis, and oral candidiasis. Photothermal therapy (PTT), another phototherapy, also plays an important role in resisting resistant bacterial and biofilm infections. In this mini-review, we summarize the latest advances in photonics-based treatments of oral infectious diseases. The whole review is divided into three main parts. The first part focuses on photonics-based antibacterial strategies and mechanisms. The second part presents applications for photonics-based treatments of oral infectious diseases. The last part discusses present problems in current materials and future perspectives.

Nanomaterials and nanomaterials-based drug delivery to promote cutaneous wound healing

Various factors could damage the structure and integrity of skin to cause wounds. Nonhealing or chronic wounds seriously affect the well-being of patients and bring heavy burdens to the society. The past few decades have witnessed application of numerous nanomaterials to promote wound healing. Owing to the unique physicochemical characteristics at nanoscale, nanomaterials-based therapy has been regarded as a potential approach to promote wound healing. In this review, we first overview the wound categories, wound healing process and critical influencing factors. Then applications of nanomaterials with intrinsic therapeutic effect and nanomaterials-based drug delivery systems to promote wound healing are addressed in detail. Finally, current limitations and future perspectives of nanomaterials in wound healing are discussed.

Photothermal Hydrogels for Promoting Infected Wound Healing

Photothermal therapies (PTT), with spatiotemporally controllable antibacterial capabilities without inducing resistance, have shown encouraging prospects in the field of infected wound treatments. As an important platform for PTT, photothermal hydrogels exhibit attractive advantages in the field of infected wound treatment due to their excellent biochemical properties and have been intensively explored in recent years. This review summarizes the progress of the photothermal hydrogels for promoting infected wound healing. Three major elements of photothermal hydrogels, i.e., photothermal materials, hydrogel matrix, and construction methods, are introduced. Furthermore, different strategies of photothermal hydrogels in the treatment of infected wounds are summarized. Finally, the challenges and prospects in the clinical treatment of photothermal hydrogels are discussed.

Research progress on black phosphorus hybrids hydrogel platforms for biomedical applications

Hydrogels, also known as three-dimensional, flexible, and polymer networks, are composed of natural and/or synthetic polymers with exceptional properties such as hydrophilicity, biocompatibility, biofunctionality, and elasticity. Researchers in biomedicine, biosensing, pharmaceuticals, energy and environment, agriculture, and cosmetics are interested in hydrogels. Hydrogels have limited adaptability for complicated biological information transfer in biomedical applications due to their lack of electrical conductivity and low mechanical strength, despite significant advances in the development and use of hydrogels. The nano-filler-hydrogel hybrid system based on supramolecular interaction between host and guest has emerged as one of the potential solutions to the aforementioned issues. Black phosphorus, as one of the representatives of novel two-dimensional materials, has gained a great deal of interest in recent years owing to its exceptional physical and chemical properties, among other nanoscale fillers. However, a few numbers of publications have elaborated on the scientific development of black phosphorus hybrid hydrogels extensively. In this review, this review thus summarized the benefits of black phosphorus hybrid hydrogels and highlighted the most recent biological uses of black phosphorus hybrid hydrogels. Finally, the difficulties and future possibilities of the development of black phosphorus hybrid hydrogels are reviewed in an effort to serve as a guide for the application and manufacture of black phosphorus -based hydrogels. Recent applications of black phosphorus hybrid hydrogels in biomedicine.

3-D tissue-engineered epidermis against human primary keratinocytes apoptosis via relieving mitochondrial oxidative stress in wound healing

The tissue-engineered epidermal (TEE), composed of biocompatible vectors and autogenous functional cells, is a novel strategy to solve the problem of shortage of donor skin sources. The human primary keratinocyte (HPK), the major skin components, are self-evident vital in wound healing and was considered as one of the preferred seed cells for TEEs. Since the process of separating HPKs from the skin triggers a stress state of the cells, achieving its rapid adhesion and proliferation on biomaterials remains challenging. The key to the clinical application is to ensure the normal function of cells while improving the proliferation ability in vitro, and to complete the complex mesenchymal epithelialization to achieve tissue remodeling after vivo implantation. Herein, in order to aid HPKs adhesion and proliferation in vitro and promoting wound healing, we developed a three dimensional collagen scaffold with Y-27632 sustainedly released from the nanoplatform, hollow mesoporous organosilica nanoparticles (HMON). The results showed that the porous structure within the TEE supports the implanted HPKs expanding in a three-dimensional mode to jointly construct the tissue-engineered epidermis in vitro and inhibited the mitochondria-mediated cell apoptosis. It was confirmed that the TEEs with suitable degradation rate could maintain drug release after implantation and could accelerate vascularization of wound base and further revealed the involvement of mesenchymal transformation of transplanted HPKs during skin regeneration in a nude mouse model with full-thickness skin resection. In conclusion, our study highlights the great potential of constructing TEE using a nanoparticle platform for the treatment of large-area skin defects.

Modified black phosphorus quantum dots promotes spinal cord injury repair by targeting the AKT signaling pathway

Spinal cord injury (SCI) is a serious refractory disease of the central nervous system (CNS), which mostly caused by high-energy trauma. Existing interventions such as hormone shock and surgery are insufficient options, which relate to the secondary inflammation and neuronal dysfunction. Hydrogel with neuron-protective behaviors attracts tremendous attention, and black phosphorus quantum dots (BPQDs) encapsulating with Epigallocatechin-3-gallate (EGCG) hydrogels (E@BP) is designed for inflammatory modulation and SCI treatment in this study. E@BP displays good stability, biocompatibility and safety profiles. E@BP incubation alleviates lipopolysaccharide (LPS)-induced inflammation of primary neurons and enhances neuronal regeneration in vitro. Furthermore, E@BP reconstructs structural versus functional integrity of spinal cord tracts, which promotes recovery of motor neuron function in SCI rats after transplantation. Importantly, E@BP restarts the cell cycle and induces nerve regeneration. Moreover, E@BP diminishes local inflammation of SCI tissues, characterized by reducing accumulation of astrocyte, microglia, macrophages, and oligodendrocytes. Indeed, a common underlying mechanism of E@BP regulating neural regenerative and inflammatory responses is to promote the phosphorylation of key proteins related to AKT signaling pathway. Together, E@BP probably repairs SCI by reducing inflammation and promoting neuronal regeneration via the AKT signaling pathway.

Polysaccharide-based hydrogel with photothermal effect for accelerating wound healing

Polysaccharide-based hydrogel has excellent biochemical function, abundant sources, good biocompatibility and other advantages, and has a broad application prospect in biomedical fields, especially in the field of wound healing. With its inherent high specificity and low invasive burden, photothermal therapy has shown great application prospect in preventing wound infection and promoting wound healing. Combining polysaccharide-based hydrogel with photothermal therapy (PTT), multifunctional hydrogel with photothermal, bactericidal, anti-inflammatory and tissue regeneration functions can be designed, so as to achieve better therapeutic effect. This review first focuses on the basic principles of hydrogel and PTT, and the types of polysaccharides that can be used to design hydrogels. In addition, according to the different materials that produce photothermal effects, the design considerations of several representative polysaccharide-based hydrogels are emphatically introduced. Finally, the challenges faced by polysaccharide-based hydrogels with photothermal properties are discussed, and the future prospects of this field are put forward.

Imaging-Guided Biomimetic M1 Macrophage Membrane-Camouflaged Magnetic Nanorobots for Photothermal Immunotargeting Cancer Therapy

Biohybrid micro/nanorobots have demonstrated improved therapeutic outcomes for targeting and treating diseases in preclinical trials. However, in vivo applications remain challenging due to a lack of sufficient targeting. Based on evidence that immune cells play a role in the immune modulation in the tumor microenvironment, we developed M1 macrophage membrane-coated magnetic photothermal nanocomplexes (MPN) for photoacoustic (PA) imaging-guided tumor therapy. The MPN were able to inherit the protein from the original macrophage cells and exert a targeted immunosuppression role. Integrating black phosphorus quantum dots and DOX also greatly enhanced reactive oxygen species generation and chemo-phototherapy efficacy. The results suggest that the MPN can be employed as an excellent tumor immunotargeting nanorobotic platform for modulating the tumor microenvironment under PA imaging and magnetic guidance and, thus, exert synergistic therapeutic efficacies.

Nanomaterials-Functionalized Hydrogels for the Treatment of Cutaneous Wounds

Hydrogels have been utilized extensively in the field of cutaneous wound treatment. The introduction of nanomaterials (NMs), which are a big category of materials with diverse functionalities, can endow the hydrogels with additional and multiple functions to meet the demand for a comprehensive performance in wound dressings. Therefore, NMs-functionalized hydrogels (NMFHs) as wound dressings have drawn intensive attention recently. Herein, an overview of reports about NMFHs for the treatment of cutaneous wounds in the past five years is provided. Firstly, fabrication strategies, which are mainly divided into physical embedding and chemical synthesis of the NMFHs, are summarized and illustrated. Then, functions of the NMFHs brought by the NMs are reviewed, including hemostasis, antimicrobial activity, conductivity, regulation of reactive oxygen species (ROS) level, and stimulus responsiveness (pH responsiveness, photo-responsiveness, and magnetic responsiveness). Finally, current challenges and future perspectives in this field are discussed with the hope of inspiring additional ideas.

The Application of Black Phosphorus Nanomaterials in Bone Tissue Engineering

Recently, research on and the application of nanomaterials such as graphene, carbon nanotubes, and metal-organic frameworks has become increasingly popular in tissue engineering. In 2014, a two-dimensional sheet of black phosphorus (BP) was isolated from massive BP crystals. Since then, BP has attracted significant attention as an emerging nanomaterial. BP possesses many advantages such as light responsiveness, electrical conductivity, degradability, and good biocompatibility. Thus, it has broad prospects in biomedical applications. Moreover, BP is composed of phosphorus, which is a key bone tissue component with good biocompatibility and osteogenic repair ability. Thereby, BP exhibits excellent advantages for application in bone tissue engineering. In this review, the structure and the physical and chemical properties of BP are described. In addition, the current applications of BP in bone tissue engineering are reviewed to aid the future research and application of BP.

Design of Near-Infrared-Triggered Cellulose Nanocrystal-Based In Situ Intelligent Wound Dressings for Drug-Resistant Bacteria-Infected Wound Healing

Postoperative infected wound complications caused by residual tumor cells, bacterial biofilms, and drug-resistant bacteria have become the main challenge in postsurgical skin regeneration. Herein, a bionic cellulose nanocrystal (CNC)-based in situ intelligent wound dressing with near-infrared (NIR)-, temperature-, and pH-responsive functions was designed by using NIR-responsive CNC as the network skeleton, dynamic imine bonds between dialdehyde cellulose nanocrystals and doxorubicin, chitosan oligosaccharide as the pH-responsive switch, and temperature-sensitive poly(N-isopropyl acrylamide) as the temperature-responsive in situ formation switch. The as-prepared wound dressing with the intertwining three-dimensional (3D) network structure possessed high drug loadability of indocyanine green (30 mg/g) and doxorubicin (420 mg/g) simultaneously. The temperature-, NIR-, and pH-responsive switches endowed the wound dressing with controllable on-demand drug release behavior. In particular, the temperature switch endowed the dressing with a shape-adaptable ability on irregularly infected wounds. Interestingly, the wound dressing showed excellent antitumor activity for A375 tumor cells, antibacterial activity against methicillin-resistant Staphylococcus aureus (MRSA) and bacterial biofilm removal ability. Therefore, the developed wound dressing can provide an ideal synergistic treatment strategy combined with chemotherapy and photodynamic and photothermal therapy for postoperative drug-resistant bacteria-infected wound healing.

Facile synthesis of black phosphorus-zinc oxide nanohybrids for antibacterial coating of titanium surface

Bacterial infection is a major complication associated with bioimplant materials, including titanium (Ti) based orthopedic joints and dental implants. Thus, the fabrication of Ti surfaces with antibacterial activity is highly important. Black phosphorus (BP) is a recently discovered promising two-dimensional semiconductor for various biomedical applications due to its tunable bandgap and physicochemical properties. The present study aimed to synthesize zinc oxide (ZnO) laden BP nanohybrids (NH) and their coatings on a Ti bioimplant surface for improving the antibacterial activities against pathogenic bacteria with and without near-infrared (NIR) light irradiation. Nanohybrids were produced with the slightly oxidized BP NF and electrostatically laden ZnO NP. The produced BP-ZnO NH was a NIR active nanomaterial (up to ∼1000 nm), demonstrating a photothermal effect against bacterial infection and showing improved activity by damaging the cell membrane towards S. aureus in comparison to E. coli. Ti surface coated with BP-ZnO NH embedded chitosan (CS) demonstrated better antibacterial activity than BP NF, especially with NIR light treatment. Additionally, the produced BP nanoflakes and BP-ZnO NH, and their coatings over the Ti surface were found to be toxic at a negligible level. Electrochemical studies revealed the high corrosion resistance of the Ti surface coated with the synthesized antibacterial agents without altering its characteristic passive behavior. Owing to the interactions between the charged groups between chitosan and cell surfaces, a slight increase in antibacterial activities was noticed. Chitosan-based coating matrix embedded with nanoagents has adhered well over the Ti surface due to its inherent film-forming and high adhesion properties.

Stimuli-responsive therapeutic systems for the treatment of diabetic infected wounds

Diabetic wound infection is a common disease that has significantly reduced people's quality of life. Although tremendous achievements have been made in clinical treatment, the crucial challenge in diabetic infected wound management stems from the detrimental diabetic wound environment and the emergence of bacterial resistance after long-term medication, which result in a reduced efficacy, an increased dosage of medication, and severe side effects. To tackle these issues, it is of great significance to develop an innovative treatment strategy for diabetic wound infection therapy. Currently, the exploitation of nanobiomaterial-based therapeutic systems for diabetic infected wounds is booming, and therapeutic systems with a stimuli-responsive performance have received extensive attention. These therapeutic systems are able to accelerate diabetic infected wound healing due to the on-demand release of therapeutic agents in diabetic infected wounds in response to stimulating factors. Based on the characteristics of diabetic infected wounds, many endogenous stimuli-responsive (e.g., glucose, enzyme, hypoxia, and acidity) therapeutic systems have been employed for the targeted treatment of infected wounds in diabetic patients. Additionally, exogenous stimulants, including light, magnetism, and temperature, are also capable of achieving on-demand drug release and activation. In this review, the characteristics of diabetic infected wounds are presented, and then exogenous/endogenous stimuli therapeutic systems for the treatment of diabetic infected wounds are summarized. Finally, the current challenges and future outlook of stimuli-responsive therapeutic systems are also discussed.

Bacterial Growth-Induced Tobramycin Smart Release Self-Healing Hydrogel for Pseudomonas aeruginosa-Infected Burn Wound Healing

Burns are a common health problem worldwide and are highly susceptible to bacterial infections that are difficult to handle with ordinary wound dressings. Therefore, burn wound repair is extremely challenging in clinical practice. Herein, a series of self-healing hydrogels (QCS/OD/TOB/PPY@PDA) with good electrical conductivity and antioxidant activity were prepared on the basis of quaternized chitosan (QCS), oxidized dextran (OD), tobramycin (TOB), and polydopamine-coated polypyrrole nanowires (PPY@PDA NWs). These Schiff base cross-links between the aminoglycoside antibiotic TOB and OD enable TOB to be slowly released and responsive to pH. Interestingly, the acidic substances during the bacteria growth process can induce the on-demand release of TOB, avoiding the abuse of antibiotics. The antibacterial results showed that the QCS/OD/TOB/PPY@PDA9 hydrogel could kill high concentrations of Pseudomonas aeruginosa (PA), Staphylococcus aureus, and Escherichia coli in a short time and showed a bactericidal effect for up to 11 days in an agar plate diffusion experiment, while showing good in vivo antibacterial activity. Excellent and long-lasting antibacterial properties make it suitable for severely infected wounds. Furthermore, the incorporation of PPY@PDA endowed the hydrogel with near-infrared (NIR) irradiation assisted bactericidal activity of drug-resistant bacteria, conductivity, and antioxidant activity. Most importantly, in the PA-infected burn wound model, the QCS/OD/TOB/PPY@PDA9 hydrogel more effectively controlled wound inflammation levels and promoted collagen deposition, vascular generation, and earlier wound closure compared to Tegaderm dressings. Therefore, the TOB smart release hydrogels with on-demand delivery are extremely advantageous for bacterial-infected burn wound healing.

Encapsulation of berberine decorated ZnO nano-colloids into injectable hydrogel using for diabetic wound healing

Chronic wound healing in diabetic patients had been considered a major clinical challenge, so there was an urgent need to establish more effective treatment methods. In this study, we prepared berberine-modified ZnO nano-colloids hydrogel (ZnO-Ber/H) and evaluated its wound healing performance in a diabetic rat. The prepared ZnO-Ber/H had excellent moisturizing, anti-inflammatory and anti-oxidative stress abilities. In vitro, ZnO-Ber/H could effectively up-regulate antioxidant stress factors (Nrf2, HO-1, NQO1) by 4.65-fold, 2.49-fold, 2.56-fold, respectively. In vivo experiments have shown that ZnO-Ber/H could effectively improve the wound healing rate (92.9%) after 15 days of treatment. Meanwhile, the ability of anti-oxidative stress had also been verified in vivo. ZnO-Ber/H down-regulated inflammatory factor (TNF-α, IL-1β, and IL-6) by 72.8%, 55% and 71% respectively, up-regulated vascular related factors VEGF and CD31 by 3.9-fold and 3.2-fold by Western blot. At the same time, ZnO-Ber/H could promote the expression of EGFR and FGFR, thereby affecting the generation of new epithelial tissue. Based on extensive characterization and biological evaluation, ZnO-Ber/H was expected to be a potential candidate for promoting diabetic wound healing.

Acellular dermal matrix decorated with collagen-affinity peptide accelerate diabetic wound healing through sustained releasing Histatin-1 mediated promotion of angiogenesis

Treating diabetic ulcers is a major challenge in clinical practice, persecuting millions of patients with diabetes and increasing the medical burden. Recombinant growth factor application can accelerate diabetic wound healing via angiogenesis. The local administration of recombinant growth factors has no robust clinical efficiency because of the degradation of append short duration of the molecules in the hostile inflammatoryenvironment.The present study focused on the pathophysiology of impaired neovascularization and growth factor short duration in the diabetic wound. We prepared a collagen-binding domain (CBD)-fused recombinant peptide (C-Histatin-1) that had both pro-angiogenesis capacity and collagen-affinity properties. Next, we created a biocompatible acellular dermal matrix (ADM) as a drug delivery carrier that featured collagen-richness, high porosity, and non-cytotoxicity. C-Histatin-1 was then tethered on ADM to obtain a sustained-release effect. Finally, a functional scaffold (C-Hst1/ADM) was developed. C-Hst1/ADM can sustain-release Histatin-1 to promote the adhesion, migration, and angiogenesisof vascular endothelial cells in vitro. Using a diabetic wound model, we showed that C-Hst1/ADM could significantly promote angiogenesis, reduce scar widths, and improve extracellular collagen accumulation. Therefore, the results of this study provide a foundation for the clinical application of C-Hst1/ADM covering scaffold in the treatment of diabetic wounds.

Enhanced photocatalytic and antibacterial activity of acridinium-grafted g-C3N4 with broad-spectrum light absorption for antimicrobial photocatalytic therapy

As a metal-free polymeric photocatalyst, graphitic carbon nitride (g-C₃N₄) has attracted great attention owing to its high stability and low toxicity. However, g-C₃N₄ suffers from low light harvesting ability which limits its applications in antimicrobial photocatalytic therapy (APCT). Herein, acridinium (ADN)-grafted g-C₃N₄ (ADN@g-C₃N₄) nanosheets are prepared via covalent grafting of ADN to g-C₃N₄. The obtained ADN@g-C₃N₄ exhibits a narrow optical band gap (2.12 eV) and a wide optical absorption spectrum (intensity a.u. > 0.30) ranging from ultraviolet to near-infrared region. Moreover, ADN@g-C₃N₄ would produce reactive oxygen species (ROS) under light irradiation to exert effective sterilization and biofilm elimination activities against both gram-negative and gram-positive bacteria. Molecular dynamics simulation reveals that the ADN@g-C₃N₄ may move toward, tile and insert the bacterial lipid bilayer membrane through strong van der Waals and electrostatic interaction, decreasing the order parameter of the lipid while increasing the conducive of ROS migration, inducing ADN@g-C₃N₄ with improved antimicrobial and antibiofilm performance. Moreover, ADN@g-C₃N₄ could efficiently eradicate oral biofilm on artificial teeth surfaces. This work may provide a broad-spectrum light-induced photocatalytic therapy for preventing and treating dental plaque diseases and artificial teeth-related infections, showing potential applications for intractable biofilm treatment applications. An acridinium-grafted g-C₃N₄ (ADN@g-C₃N₄) with a narrow band gap and broad-spectrum light absorption was synthesized. The narrow optical band gap and improved electrostatic interaction with bacterial lipid bilayer membrane of ADN@g-C₃N₄ strengthened the ROS generation and facilitated the diffusion of ROS to bacteria surface, leading to enhanced photocatalytic and antibacterial activity against bacteria and corresponding biofilm under light irradiation. STATEMENT OF SIGNIFICANCE: An acridinium-grafted g-C₃N₄ (ADN@g-C₃N₄) with a narrow band gap and broad-spectrum light absorption was developed as an antimicrobial photocatalytic therapy agent. The ADN@g-C₃N₄ exhibited enhanced photocatalytic and antibacterial activity against bacteria and corresponding biofilm under light irradiation, showing potential applications for intractable biofilm treatment.

An all-in-one CO gas therapy-based hydrogel dressing with sustained insulin release, anti-oxidative stress, antibacterial, and anti-inflammatory capabilities for infected diabetic wounds

To effectively treat diabetic wounds, the development of versatile medical dressings that can long-term regulate blood glucose and highly effective anti-oxidative stress, antibacterial and anti-inflammatory are critical. Here, an all-in-one CO gas-therapy-based versatile hydrogel dressing (ICOQF) was developed via the dynamic Schiff base reaction between the amino groups on quaternized chitosan (QCS) and the aldehyde groups on benzaldehyde-terminated F108 (F108-CHO) micelles. CORM-401 (an oxidant-sensitive CO-releasing molecules) was encapsulated in the hydrophobic core of F108-CHO micelles and insulin was loaded in the three-dimensional network structure of ICOQF. The dynamic Schiff base bonds not only endowed ICOQF with good tissue adhesion, injectability and self-healing, but also gave it sustained and controllable insulin release ability. In addition, ICOQF could quickly generate CO in inflamed wound tissue by consuming reactive oxygen species. The generated CO could effectively anti-oxidative stress by activating the expression of heme oxygenase; antibacterial by inducing the rupture of bacterial cell membranes and mitochondrial dysfunction and inhibiting the synthesis of adenosine triphosphate; and anti-inflammatory by inhibiting the proliferation of activated macrophages and promoting the polarization of the M1 phenotype to the M2 phenotype. Due to these outstanding properties, ICOQF significantly promoted the healing of STZ-induced MRSA-infected diabetic wounds accompanied by good biocompatibility. This study clearly shows that ICOQF is a versatile hydrogel dressing with great application potential for the management of diabetic wounds. STATEMENT OF SIGNIFICANCE: The development of some versatile hydrogel dressings that can not only provide a prolonged and controlled insulin release property but also utilize a non-antibiotic treatment modality for highly effective antibacterial, anti-inflammatory, and anti-oxidative stress effects is vital for the successful treatment of diabetic wounds. Herein, we developed an all-in-one CO gas-therapy-based versatile hydrogel dressing (ICOQF) with sustained and controllable insulin release abilities. Moreover, ICOQF could not only quickly release CO in the inflamed wound tissue by consumption of reactive oxygen species but also utilize the generated CO to highly effectively anti-oxidative stress, antibacterial, and anti-inflammatory. ICOQF therapy substantially promoted the healing of STZ-induced MRSA-infected diabetic wounds. Overall, this work provides a multifunctional hydrogel dressing for the management of diabetic wounds.