The impact of wastewater characteristics, algal species selection and immobilisation on simultaneous nitrogen and phosphorus removal

Microalgae-mediated bioremediation: current trends and opportunities-a review

Environmental pollution poses a critical global challenge, and traditional wastewater treatment methods often prove inadequate in addressing the complexity and scale of this issue. On the other hand, microalgae exhibit diverse metabolic capabilities that enable them to remediate a wide range of pollutants, including heavy metals, organic contaminants, and excess nutrients. By leveraging the unique metabolic pathways of microalgae, innovative strategies can be developed to effectively remediate polluted environments. Therefore, this review paper highlights the potential of microalgae-mediated bioremediation as a sustainable and cost-effective alternative to conventional methods. It also highlights the advantages of utilizing microalgae and algae-bacteria co-cultures for large-scale bioremediation applications, demonstrating impressive biomass production rates and enhanced pollutant removal efficiency. The promising potential of microalgae-mediated bioremediation is emphasized, presenting a viable and innovative alternative to traditional treatment methods in addressing the global challenge of environmental pollution. This review identifies the opportunities and challenges for microalgae-based technology and proposed suggestions for future studies to tackle challenges. The findings of this review advance our understanding of the potential of microalgae-based technology wastewater treatment.

Synergistic Effects of Spirulina platensis Cultivation in Textile Wastewater Towards Nutrient Removal and Seed Germination Study

Recent escalating concerns surrounding textile wastewater pollution and the urgent need for sustainable treatment solutions to mitigate its environmental impact. This study investigates the multifaceted effects of Spirulina platensis (SP) cultivation in textile wastewater from two different sources (TWW1 and TWW2), focusing on growth kinetics, Chemical Oxygen Demand (COD), and nutrient removal percentage, and seed germination enhancement. Results showed that SP exhibited comparable growth performance in TWW1 and TWW2 to the control, indicating its potential for sustainable wastewater treatment. Moreover, maximum COD removal percentages were achieved, reaching 62.59±1.88 % for TWW1 and 46.68±1.40 % for TWW2 on day 5. The COD removal process aligns best with the first-order kinetic model. Nutrient removal rates showed decreasing trends over time, with maximum phosphate removal percentages of 36.42±0.73 % for TWW1 and 62.18±1.24 % for TWW2, and maximum ammonia removal percentages of 59.34±1.18 % for TWW1 and 69.31±1.39 % for TWW2. FTIR analysis confirmed pollutant removal-induced changes in algal biomass functional groups. Seed germination studies indicated enhanced shoot and root development of vigna radiatas using treated TWW1 and TWW2 compared to the control, suggesting potential applications for irrigation. An increase in the lipid & carbohydrate content post-treatment was observed and it would be suitable for biofuel production. This comprehensive assessment demonstrates the synergistic benefits of phycoremediation in simultaneously removing pollutants, promoting plant growth, and enhancing wastewater treatment efficiency, underscoring its potential for sustainable water management practices.

Synergistic algal/bacterial interaction in membrane bioreactor for detoxification of 1,2-dichloroethane-rich petroleum wastewater

The study addressed the challenge of treating petroleum industry wastewater with high concentrations of 1,2-dichloroethane (1,2-DCA) ranging from 384 to 1654 mg/L, which poses a challenge for bacterial biodegradation and algal photodegradation. To overcome this, a collaborative approach using membrane bioreactors (MBRs) that combine algae and bacteria was employed. This synergistic method effectively mitigated the toxicity of 1,2-DCA and curbed MBR fouling. Two types of MBRs were tested: one (B-MBR) used bacterial cultures and the other (AB-MBR) incorporated a mix of algal and bacterial cultures. The AB-MBR significantly contributed to 1,2-DCA removal, with algae accounting for over 20% and bacteria for approximately 49.5% of the dechlorination process. 1,2-DCA metabolites, including 2-chloroethanol, 2-chloro-acetaldehyde, 2-chloroacetic acid, and acetic acid, were partially consumed as carbon sources by algae. Operational efficiency peaked at a 12-hour hydraulic retention time (HRT) in AB-MBR, enhancing enzyme activities crucial for 1,2-DCA degradation such as dehydrogenase (DH), alcohol dehydrogenase (ADH), and acetaldehyde dehydrogenase (ALDH). The microbial diversity in AB-MBR surpassed that in B-MBR, with a notable increase in Proteobacteria, Bacteroidota, Planctomycetota, and Verrucomicrobiota. Furthermore, AB-MBR showed a significant rise in the dominance of 1,2-DCA-degrading genus such as Pseudomonas and Acinetobacter. Additionally, algal-degrading phyla (e.g., Nematoda, Rotifera, and Streptophyta) were more prevalent in AB-MBR, substantially reducing the issue of membrane fouling.

Prediction of chlorophyll a and risk assessment of water blooms in Poyang Lake based on a machine learning method

Four different methods were used to identify the important factors influencing chlorophyll-a (Chl-a) content: correlation analysis (CC-NMI), principal component analysis (PCA), decision tree (DT), and random forest recursive feature elimination (RF-RFE). Considering the relationship between Chl-a and its active and passive factors, we established machine learning combination models based on multiple linear regression (MLR), multi-layer perceptron (MLP), and support vector regression (SVR) to predict Chl-a content for Poyang Lake, China. Then, the predictive effects of different combination models were compared and evaluated from multiple perspectives. Considering the actual needs for eutrophication prevention and control, the concept of risk probability was then introduced to assess the risk degree of risk associated with water blooms in Poyang Lake. The results indicated that the mean R2 for the Chl-a predictions using the MLR, MLP, and SVR models was 0.21, 0.61, and 0.75, respectively. Consequently, the SVR model demonstrated higher precision and more accurate predictions. Compared to other methods, integrating the SVR model with the RF-RFE method significantly improved the prediction accuracy, with the R2 increasing to 0.94. For Poyang Lake, 8.8% of random samples indicated a low risk level with a water bloom probability of 21.1%-36.5%; one sample indicated a medium risk level with a risk probability of 45.5%. The research results offer valuable insights for predicting eutrophication and conducting risk assessments for Poyang Lake. They also provide reliable scientific support for making decisions about eutrophication in lakes and reservoirs. Therefore, the results hold significant theoretical importance, practical value, and potential for widespread application.

Membrane-based technology in water and resources recovery from the perspective of water social circulation: A review

In this review, the application of membrane-based technology in water social circulation was summarized. Water social circulation encompassed the entire process from the acquirement to discharge of water from natural environment for human living and development. The focus of this review was primarily on the membrane-based technology in recovery of water and other valuable resources such as mineral ions, nitrogen and phosphorus. The main text was divided into four main sections according to water flow in the social circulation: drinking water treatment, agricultural utilization, industrial waste recycling, and urban wastewater reuse. In drinking water treatment, the acquirement of water resources was of the most importance. Pressure-driven membranes, such as ultrafiltration (UF), nanofiltration (NF) and reverse osmosis (RO) were considered suitable in natural surface water treatment. Additionally, electrodialysis (ED) and membrane capacitive deionization (MCDI) were also effective in brackish water desalination. Agriculture required abundant water with relative low quality for irrigation. Therefore, the recovery of water from other stages of the social circulation has become a reasonable solution. Membrane bioreactor (MBR) was a typical technique attributed to low-toxicity effluent. In industrial waste reuse, the osmosis membranes (FO and PRO) were utilized due to the complex physical and chemical properties of industrial wastewater. Especially, membrane distillation (MD) might be promising when the wastewater was preheated. Resources recovery in urban wastewater was mainly divided into recovery of bioenergy (via anaerobic membrane bioreactors, AnMBR), nitrogen (utilizing MD and gas-permeable membrane), and phosphorus (through MBR with chemical precipitation). Furthermore, hybrid/integrated systems with membranes as the core component enhanced their performance and long-term working ability in utilization. Generally, concentrate management and energy consumption control might be the key areas for future advancements of membrane-based technology.

Effect of light stress on lutein production with associated phosphorus removal from a secondary effluent by the autoflocculating microalgae consortium BR-UANL-01

Microalgae have become promising microorganisms for generating high-value commercial products and removing pollutants in aquatic systems. This research evaluated the impact of sunlight intensity on intracellular pigment generation and phosphorus removal from secondary effluents by autoflocculating microalgae consortium BR-UANL-01 in photobioreactor culture. Microalgae were grown in a secondary effluent from a wastewater treatment plant, using a combination of low and high light conditions (photon irradiance; 44 μmol m-2 s-1 and ≈ 1270 μmol m-2 s-1, respectively) and 16:8 h light:dark and 24:0 h light:dark (subdivided into 18:6 LED:sunlight) photoperiods. The autoflocculant rate by consortium BR-UANL-01 was not affected by light intensity and achieved 98% in both treatments. Microalgae produced significantly more lutein, (2.91 mg g-1) under low light conditions. Phosphate removal by microalgae resulted above 85% from the secondary effluent, due to the fact that phosphorus is directly associated with metabolic and replication processes and the highest antioxidant activity was obtained in ABTS•+ assay by the biomass under low light condition (51.71% μmol ET g-1). In conclusion, the results showed that the autoflocculating microalgae consortium BR-UANL-01 is capable of synthesizing intracellular lutein, which presents antioxidant activity, using secondary effluents as a growth medium, without losing its autoflocculating activity and assimilating phosphorus.

An insight on pollutant removal mechanisms in phycoremediation of textile wastewater

Pollutants, including dyes and heavy metals from textile industrial discharge, adversely affect the surface and groundwater resources, and pose a severe risk to the living organisms in the ecosystem. Phycoremediation of wastewater is now an emerging trend, as it is colossally available, inexpensive, eco-friendly, and has many other benefits, with high removal efficiency for undesirable substances, when compared to conventional treatment methods. Algae have a good binding affinity toward nutrients and toxic compounds because of various functional groups on its cell surface by following the mechanisms such as biosorption, bioaccumulation, or alternate biodegradation pathway. Algae-based treatments generate bioenergy feedstock as sludge, mitigate CO2, synthesize high-value-added products, and release oxygenated effluent. Algae when converted into activated carbon also show good potential against contaminants, because of its higher binding efficiency and surface area. This review provides an extensive analysis of different mechanisms involved in removal of undesirable and hazardous substances from textile wastewater using algae as green technology. It could be founded that both biosorption and biodegradation mechanisms were responsible for the removal of dye, organic, and inorganic pollutants. But for the heavy metals removal, biosorption results in higher removal efficiency. Overall, phycoremediation is a convenient technique for substantial conserving of energy demand, reducing greenhouse gas emissions, and removing pollutants.

Simultaneously enhancement in the assimilation of microalgal nitrogen and the accumulation of carbohydrate by Debaryomyces hansenii

Microalgae-based techniques are considered an alternative to traditional activated sludge processes for removing nitrogen from wastewater. Bacteria consortia have been broadly conducted as one of the most important partners. However, fungal effects on the removal of nutrients and changes in physiological properties of microalgae, and their impact mechanisms remain unclear. The current work demonstrates that, adding fungi increased the nitrogen assimilation of microalgae and the generation of carbohydrates compared to pure microalgal cultivation. The NH₄⁺-N removal efficiency was 95.0% within 48 h using the microalgae-fungi system. At 48 h, total sugars (glucose, xylose, and arabinose) accounted for 24.2 ± 4.2% per dry weight in the microalgae-fungi group. Gene ontology (GO) enrichment analysis revealed that, among various processes, phosphorylation and carbohydrate metabolic processes were more prominent. Gene encoding the key enzymes of glycolysis, pyruvate kinase, and phosphofructokinase were significantly up-regulated. Overall, for the first time, this study provides new insights into the art of microalgae-fungi consortia for producing value-added metabolites.

Enhancing Urban Wastewater Treatment through Isolated Chlorella Strain-Based Phytoremediation in Centrate Stream: An Analysis of Algae Morpho-Physiology and Nutrients Removal Efficiency

The release of inadequately treated urban wastewater is the main cause of environmental pollution of aquatic ecosystems. Among efficient and environmentally friendly technologies to improve the remediation process, those based on microalgae represent an attractive alternative due to the potential of microalgae to remove nitrogen (N) and phosphorus (P) from wastewaters. In this work, microalgae were isolated from the centrate stream of an urban wastewater treatment plant and a native Chlorella-like species was selected for studies on nutrient removal from centrate streams. Comparative experiments were set up using 100% centrate and BG11 synthetic medium, modified with the same N and P as the effluent. Since microalgal growth in 100% effluent was inhibited, cultivation of microalgae was performed by mixing tap-freshwater with centrate at increasing percentages (50%, 60%, 70%, and 80%). While algal biomass and nutrient removal was little affected by the differently diluted effluent, morpho-physiological parameters (F_V/F_M ratio, carotenoids, chloroplast ultrastructure) showed that cell stress increased with increasing amounts of centrate. However, the production of an algal biomass enriched in carotenoids and P, together with N and P abatement in the effluent, supports promising microalgae applications that combine centrate remediation with the production of compounds of biotechnological interest; for example, for organic agriculture.

Phycoremediation for carbon neutrality and circular economy: Potential, trends, and challenges

Phycoremediation is gaining attention not only as a pollutant mitigation approach but also as one of the most cost-effective paths to achieve carbon neutrality. When compared to conventional treatment methods, phycoremediation is highly effective in removing noxious substances from wastewater and is inexpensive, eco-friendly, abundantly available, and has many other advantages. The process results in valuable bioproducts and bioenergy sources combined with pollutants capture, sequestration, and utilization. In this review, microalgae-based phycoremediation of various wastewaters for carbon neutrality and circular economy is analyzed scientometrically. Different mechanisms for pollutants removal and resource recovery from wastewaters are explained. Further, critical parameters that influence the engineering design and phycoremediation performance are described. A comprehensive knowledge map highlighting the microalgae potential to treat a variety of industrial effluents is also presented. Finally, challenges and future prospects for industrial implementation of phycoremediation towards carbon neutrality coupled with circular economy are discussed.

Data-driven analysis on immobilized microalgae system: New upgrading trends for microalgal wastewater treatment

Microalgal immobilization is receiving increasing attention as one of the most viable alternatives for upgrading conventional wastewater treatment. However, an in-depth discussion of the state-of-the-art and limitations of available technologies is currently lacking. More importantly, the reason for the hesitant development of immobilized microalgae for wastewater treatment remains unclear, which hinders its practical application. Thus, comprehensively understanding and evaluating details on immobilized microalgae is urgently needed, especially for the current advances of immobilization of microalgae in wastewater treatment over the last few decades. In this review, scientometric approach is used to explore research hotspots and visualize emerging trends. Data-driven analysis is used to scientifically and methodically determine hotspots in the current research on immobilized microalgal wastewater treatment, along with that the implicit inner connection underlying the frequent co-occurring terms was explored in depth. Four hotspots focusing on immobilized microalgae for wastewater treatment were identified, mainly demonstrating: (1) main factors including light, temperature and immobilization methods would majorly affect the treatment performance of immobilized microalgae; (2) immobilized microalgae membrane bioreactor, immobilized microalgae-based microbial fuel cell and immobilized microalgae-based bed reactor are three dominant treatment systems; (3) immobilized microalgae have a higher robustness and tolerance for treating various types of wastewater; and (4) a complete sustainable circle from wastewater treatment to resource conversion via the immobilized microalgae can be achieved. Finally, several new directions and new perspectives that expose the necessity for fulfilling further research and fundamental gaps are pointed out. Taken together, this review provides helpful information to facilitate the development of innovative and feasible immobilized microalgal technologies thus increasing their viability and sustainability.

Current Progress, Challenges and Perspectives in the Microalgal-Bacterial Aerobic Granular Sludge Process: A Review

Traditional wastewater treatment technologies have become increasingly inefficient to meet the needs of low-consumption and sustainable wastewater treatment. Researchers are committed to seeking new wastewater treatment technologies, to reduce the pressure on the environment caused by resource shortages. Recently, a microalgal-bacterial granular sludge (MBGS) technology has attracted widespread attention due to its high efficiency wastewater treatment capacity, low energy consumption, low CO₂ emissions, potentially high added values, and resource recovery capabilities. This review focused primarily on the following aspects of microalgal-bacterial granular sludge technology: (1) MBGS culture and maintenance operating parameters, (2) MBGS application in different wastewaters, (3) MBGS additional products: biofuels and bioproducts, (4) MBGS energy saving and consumption reduction: greenhouse gas emission reduction, and (5) challenges and prospects. The information in this review will help us better understand the current progress and future direction of the MBGS technology development. It is expected that this review will provide a sound theoretical basis for the practical applications of a MBGS technology in environmentally sustainable wastewater treatment, resource recovery, and system optimization.

Agro-industrial wastewater-grown microalgae: A techno-environmental assessment of open and closed systems

Microalgae-based treatment can be applied to the bioremediation of agro-industrial wastewater, aiming at a circular economy approach. The present work compared the technical-environmental feasibility of operating a bubble column photobioreactor (PBR) and a high rate pond (HRP) for microalgae biomass production and wastewater treatment of a meat processing facility. The comparison was made regarding biomass productivity, phytoplankton composition, treatment efficiency, life cycle assessment, and energy balance. The daily yields of total biomass and the maximum specific growth rates were 483.33 mg L^-1 d^-1 and 0.23 d^-1 for PBR and 95.00 mg L^-1·d^-1 and 0.193 d^-1 for HRP, respectively, with a predominance of the species Scenedesmus acutus. The treatment efficiency of COD (~50%) and phosphorus (100%) were similar in the two reactors. However, the PBR showed greater assimilation of ammoniacal nitrogen (100% removal) due to the higher microalgal biomass productivity. Environmental impacts were assessed through the ReCiPe methodology for midpoint and endpoint levels. Results revealed that CO₂ supply was the most impactful process for both systems (>60%), but HRP reached lower environmental burdens (-105.90 mPt) than PBR (60.74 mPt). Energy balance through the Net Energy Ratio also resulted in the HPR advantage over the PBR (NER = 14.23 and 1.09, respectively). Still, both reactors present advantages when applied to different valorization routes. At the same time, both present room for improvement in the light of bioeconomy and biorefineries, aiming at sustainable wastewater treatment plants.

Phycoremediation of milk processing wastewater and lipid-rich biomass production using Chlorella vulgaris under continuous batch system

This study compiles the results of phycoremediation of milk processing wastewater (MPWW) and production of lipid-rich Chlorella vulgaris biomass using a continuous batch system operated for 12-wks. After a 4-wks interval, a new MPWW was loaded photobioreactor to provide appropriate nutrient supply to algae. Results indicated that MPWW supported the algal growth efficiently and the maximum algal growth was recorded in the ranges of 400.36 to 421.58 mg L^-1 during 4-wk's of the cultivation cycle. Average reduction in total nitrogen, TN (45.82-69.18%); nitrate, NO₃ (93.32-94.54%); total ammonium nitrogen, TAN (92.94-94.54%); sulphate, SO₄^-2 (85.13-87.34%); total phosphorus (75.09-78.78%); and biochemical oxygen demands, BOD (89.53-92.40%) was recorded during 12-wks phycoremediation of MPWW. Harvested algal biomass (dry weight basis, DW) exhibited a significant content of total sugar (45.5%) and total lipid (39.7%). The lipid profiling results indicated the presence of palmitic acid (39.9%), oleic acid (21.08%), linoleic acid (13.13%), and other C18 compounds in algal biomass, suggesting the suitability of MPWW for Chlorella vulgaris cultivations. Algal biomass exhibited a high heating value (MJ/Kg of DW) in the range of 17.3 to 25.1, comparable to other lignocellulose biomass to be used for bioenergy purposes. Results of this study indicate that MPWW could be utilized as a valuable medium for Chlorella vulgaris cultivation under a circular economy approach: wastewater treatment and bioenergy feedstock production. The effect of controlled environmental conditions on algal growth behavior and lipid composition in biomass, while using MPWW as a medium, could be investigated in future studies.

Performance of an immobilized microalgae-based process for wastewater treatment and biomass production: Nutrients removal, lipid induction, microalgae harvesting and dewatering

Immobilized microalgae are good for wastewater treatment and biomass production. This study investigated treatment efficiency of a continuously operated system employing immobilized microalgae for secondary effluent of wastewater treatment plants, as well as the effectiveness on induction of valuable products, harvesting and dewatering of microalgae biomass. Under semi-continuous operation condition, microalgal dry weight increased 4.75 times within 2 d, associated with the highest removal rate of ammonia and phosphate at 28.95 mg/L·d and 4.83 mg/L·d, respectively. An immobilized microalgae membrane bioreactor (iMBR) was continuously operated for a month. The harvested immobilized microalgae beads were transferred to induction stage to obtain 4.5 times increase of lipid content per cell within 2 d. Immobilized microalgae performed 1.9 cm/s settling velocity and 97% water removal efficiency around 40 °C. A prospective integrated process on resource recovery and carbon neutrality was proposed for wastewater treatment, induction, harvesting and dewatering of immobilized microalgae cells.

Progress in microalgal mediated bioremediation systems for the removal of antibiotics and pharmaceuticals from wastewater

Worldwide demand for antibiotics and pharmaceutical products is continuously increasing for the control of disease and improvement of human health. Poor management and partial metabolism of these compounds result in the pollution of aquatic systems, leading to hazardous effects on flora, fauna, and ecosystems. In the past decade, the importance of microalgae in micropollutant removal has been widely reported. Microalgal systems are advantageous as their cultivation does not require additional nutrients: they can recover resources from wastewater and degrade antibiotics and pharmaceutical pollutants simultaneously. Bioadsorption, degradation, and accumulation are the main mechanisms involved in pollutant removal by microalgae. Integration of microalgae-mediated pollutant removal with other technologies, such as biodiesel, biochemical, and bioelectricity production, can make this technology more economical and efficient. This article summarizes the current scenario of antibiotic and pharmaceutical removal from wastewater using microalgae-mediated technologies.

Microalgae-based livestock wastewater treatment (MbWT) as a circular bioeconomy approach: Enhancement of biomass productivity, pollutant removal and high-value compound production

The intensive livestock activities that are carried out worldwide to feed the growing human population have led to significant environmental problems, such as soil degradation, surface and groundwater pollution. Livestock wastewater (LW) contains high loads of organic matter, nitrogen (N) and phosphorus (P). These compounds can promote cultural eutrophication of water bodies and pose environmental and human hazards. Therefore, humanity faces an enormous challenge to adequately treat LW and avoid the overexploitation of natural resources. This can be accomplished through circular bioeconomy approaches, which aim to achieve sustainable production using biological resources, such as LW, as feedstock. Circular bioeconomy uses innovative processes to produce biomaterials and bioenergy, while lowering the consumption of virgin resources. Microalgae-based wastewater treatment (MbWT) has recently received special attention due to its low energy demand, the robust capacity of microalgae to grow under different environmental conditions and the possibility to recover and transform wastewater nutrients into highly valuable bioactive compounds. Some of the high-value products that may be obtained through MbWT are biomass and pigments for human food and animal feed, nutraceuticals, biofuels, polyunsaturated fatty acids, carotenoids, phycobiliproteins and fertilizers. This article reviews recent advances in MbWT of LW (including swine, cattle and poultry wastewater). Additionally, the most significant factors affecting nutrient removal and biomass productivity in MbWT are addressed, including: (1) microbiological aspects, such as the microalgae strain used for MbWT and the interactions between microbial populations; (2) physical parameters, such as temperature, light intensity and photoperiods; and (3) chemical parameters, such as the C/N ratio, pH and the presence of inhibitory compounds. Finally, different strategies to enhance nutrient removal and biomass productivity, such as acclimation, UV mutagenesis and multiple microalgae culture stages (including monocultures and multicultures) are discussed.

A Review on the Reliability and the Readiness Level of Microalgae-Based Nutrient Recovery Technologies for Secondary Treated Effluent in Municipal Wastewater Treatment Plants

Algae-based wastewater treatment technologies are promising green technologies with huge economical potential and environmental co-benefits. However, despite the immense research, work, and achievement, no publications were found wherein these technologies have been successfully applied in an operational environment for nitrogen and phosphorus removal of secondary treated effluent in municipal wastewater treatment plants. Based on a literature review and targeted comprehensive analysis, the paper seeks to identify the main reasons for this. The reliability (considering inlet wastewater quality variations, operating conditions and process control, algae harvesting method, and produced biomass) as well as the technology readiness level for five types of reactors are discussed. The review shows that the reactors with a higher level of control over the technological parameters are more reliable but algal post-treatment harvesting and additional costs are barriers for their deployment. The least reliable systems continue to be attractive for research due to the non-complex operation and relieved expenditure costs. The rotating biofilm systems are currently undertaking serious development due to their promising features. Among the remaining research gaps and challenges for all the reactor types are the identification of the optimal algal strains, establishment of technological parameters, overcoming seasonal variations in the effluent’s quality, and biomass harvesting.

Development a novel hexagonal airlift flat plate photobioreactor for the improvement of microalgae growth that simultaneously enhance CO2 bio-fixation and wastewater treatment

A novel hexagonal airlift flat plate (HAFP) photobioreactor was designed to improve microalgae growth rate and compared with traditional flat plate (TFP) photobioreactor. The computational fluid dynamics (CFD) simulation was used to determine hydrodynamic parameters and optimal aeration rate in the photobioreactors. Additionally, the capability of the HAFP photobioreactor to enhance microalgae based CO₂ bio-fixation and wastewater treatment were investigated. The results of CFD simulation indicated that the HAFP photobioreactor could improve hydrodynamic parameters of turbulence kinetic energy (TKE), average fluid velocity, dead zone (DZ), and water shear stress (WSS) up to 78 %, 41 %, 44 % and 40 %, respectively, under optimal aeration rate of 0.6 vvm. The proposed HAFP photobioreactor showed a drastic improvement in microalgae growth (up to 61 %). The maximum CO₂ removal of 53.8 % and bio-fixation of 0.85 g L^-1 d^-1 were achieved in the HAFP photobioreactor which were approximately 70 % more than that in the TFP photobioreactor. The results suggested that the HAFP photobioreactor could accelerate nutrients removal and achieve remarkably higher efficiencies of 91 %, 99 %, 97 % and 93 % of ammonia (NH₃), nitrate (NO₃^-), phosphate (PO₄^3-) and chemical oxygen demand (COD) within seven days of cultivation.

A review on algal-bacterial symbiotic system for effective treatment of wastewater

Industrialization, urbanization and other anthropogenic activities releases different organic and inorganic toxic chemicals into the environment which prompted the water contamination in the environment. Different physical and chemical techniques have been employed to treat the contaminated wastewater, among them biological wastewater treatment using algae has been studied extensively to overwhelm the constraints related to the usually utilized wastewater treatment techniques. The presence of bacterial biota in the wastewater will form a bond with algae and act as a natural water purification system. The removal efficiency of single algae systems was very low in contrast with that of algal-bacterial systems. Heterotrophic microorganisms separate natural organic matter that is discharged by algae as dissolved organic carbon (DOC) and discharges CO₂ that the algae can take up for photosynthesis. Algae bacteria associations offer an exquisite answer for tertiary and scrape medicines because of the capacity of micro-algae to exploit inorganic compounds for their development. Furthermore, for their ability to evacuate noxious contaminants, in this way, it does not prompt optional contamination. The present review contribute the outline of algae-bacteria symbiotic relationship and their applications in the wastewater treatment. The role of algae and bacteria in the wastewater treatment have been elucidated in this review. Moreover, the efforts have been imparted the importance of alage-bacteria consortium and its applications for various pollutant removal from the environment.

Polymeric Materials Used for Immobilisation of Bacteria for the Bioremediation of Contaminants in Water

Bioremediation is a key process for reclaiming polluted soil and water by the use of biological agents. A commonly used approach aims to neutralise or remove harmful pollutants from contaminated areas using live microorganisms. Generally, immobilised microorganisms rather than planktonic cells have been used in bioremediation methods. Activated carbon, inorganic minerals (clays, metal oxides, zeolites), and agricultural waste products are acceptable substrates for the immobilisation of bacteria, although there are limitations with biomass loading and the issue with leaching of bacteria during the process. Various synthetic and natural polymers with different functional groups have been used successfully for the efficient immobilisation of microorganisms and cells. Promise has been shown using macroporous materials including cryogels with entrapped bacteria or cells in applications for water treatment and biotechnology. A cryogel is a macroporous polymeric gel formed at sub-zero temperatures through a process known as cryogelation. Macroporous hydrogels have been used to make scaffolds or supports for immobilising bacterial, viral, and other cells. The production of composite materials with immobilised cells possessing suitable mechanical and chemical stability, porosity, elasticity, and biocompatibility suggests that these materials are potential candidates for a range of applications within applied microbiology, biotechnology, and research. This review evaluates applications of macroporous cryogels as tools for the bioremediation of contaminants in wastewater.

Insight into nitrogen and phosphorus coupling effects on mixotrophic Chlorella vulgaris growth under stably controlled nutrient conditions

In water environment, nitrogen (N) and phosphorus (P) are biochemically dependent nutrients following the co-limitation concept for algae growth under mixotrophic mode. From a practical viewpoint, algae growth may not bring about significant change of the background nutrient concentration of an actual waterbody in contrast to a conventional batch system. In order to better understand the growth pattern of microalgae in aquatic environments, a series of experiments were conducted under stably controlled N-P levels for studying the N-P coupling effect on mixotrophic Chlorella vulgaris growth process, with attention paid to the physiological and biochemical characteristics. It was found that within the concentration range of N = 1-8 mg·L^-1 and P = 0.1-1.0 mg·L^-1, the variation of the N-P level slightly affected the specific growth rate, but significantly influenced nutrients uptake, biomass dry weight, chlorophyll contents of the grown C. vulgaris. The biochemical and elemental composition of the microalgae tended to be more sensitive to the N-P concentrations and ratios in the lower nutrient range (1-2 mg N·L^-1, 0.1-0.4 mg P·L^-1) in which the highest N and P conversion rates were gained as 90.18 ± 1.23% and 60.47 ± 1.59%, respectively. The P assimilation and conversion efficiencies were much affected by both N and P supplies, while the P supply showed little influence on N assimilation and conversion efficiencies. It was also noticed that the N level greatly affected the metabolic pathway involving nutrient assimilation, carbohydrate fixation and monosaccharide profile, resulting in conversion of the dominant fraction of protein at N ≤ 2 mg·L^-1 into other biochemical compositions including lipids at N ≥ 3 mg·L^-1. The fatty acid methyl esters (FAMEs) composition tended to differ with varied nutrient levels. These findings may deepen our understanding of algal growth in aquatic environment and provide perspective for eutrophication control.

Effect of biomass immobilization and reduced graphene oxide on the microbial community changes and nitrogen removal at low temperatures

The slow growth rate and high optimal temperatures for the anaerobic ammonium oxidation (anammox) bacteria are significant limitations of the anammox processes application in the treatment of mainstream of wastewater entering wastewater treatment plant (WWTP). In this study, we investigate the nitrogen removal and microbial community changes in sodium alginate (SA) and sodium alginate–reduced graphene oxide (SA-RGO) carriers, depending on the process temperature, with a particular emphasis on the temperature close to the mainstream of wastewater entering the WWTP. The RGO addition to the SA matrix causes suppression of the beads swelling, which intern modifies the mechanical properties of the gel beads. The effect of the temperature drop on the nitrogen removal rate was reduced for biomass entrapped in SA and SA-RGO gel beads in comparison to non-immobilized biomass, this suggests a ‘‘protective” effect caused by immobilization. However, analyses performed using next-generation sequencing (NGS) and qPCR revealed that the microbial community composition and relative gene abundance changed significantly, after the implementation of the new process conditions. The microbial community inside the gel beads was completely remodelled, in comparison with inoculum, and denitrification contributed to the nitrogen transformation inside the beads.

Effect of fluoxetine on enhanced biological phosphorus removal using a sequencing batch reactor

In this work, the potential impact of emerging pollutant Fluoxetine (FLX) on enhanced biological phosphorus removal (EBPR) was systematically investigated using the sequencing batch reactor. The experimental results showed that even 200 μg/L FLX had no significant effect on EBPR during the short-term exposure. However, in the long-term exposure test, high dosage of FLX inhibited EBPR. 200 μg/L FLX induced biological phosphorus removal efficiency dropped to 71.3 ± 2.1%, significantly lower than that of the blank. The mechanism investigation showed that high concentration of FLX reduced anaerobic phosphorus release and oxic phosphorus absorption, and the consumption of organic matter during the anaerobic period. In addition, FLX decreased the synthesis of intracellular polymer polyhydroxyalkanoates (PHA), but promoted the metabolism of glycogen and polyhydroxyvalerate. FLX reduced the activity of key enzymes in EBPR and the relative abundance of Accumulibacter, but improved the relative abundance of Candidatus Competibacter.

Immobilization altering the growth behavior, ammonium uptake and amino acid synthesis of Chlorella vulgaris at different concentrations of carbon and nitrogen

Nitrogen recycling by microalgae has aroused considerable attention. In this study, immobilized Chlorellavulgaris with 5-day mixotrophic cultivation to recover ammonium (NH₄⁺-N) were systematically investigated under various sodium acetate (CH₃COONa) and ammonium chloride (NH₄Cl) concentrations, and evaluated by comparison with suspended cells. The results revealed that, unlike suspended cells, NH₄⁺-N uptake by immobilized cells was not in direct proportion to chemical oxygen demand (COD) concentrations. The immobilized cells to NH₄⁺-N uptake was all inferior to that of suspended cells, presenting the maximum rate of 68.92% in group of 30 mg/L NH₄⁺-N and 200 mg/L COD. Free amino acids in immobilized cells such as glutamate (Glu), arginine (Arg), proline (Pro) and leucine (Leu) were more sensitive to NH₄⁺-N assimilation, as higher values observed by suspended cells. Low carbon-nitrogen (C/N) ratio showed remarkable benefits to amino acid synthesis. These results could provide a reference for manipulating the algal system and biomass accumulation.

Removal of Nitrogen and Phosphorus from Thickening Effluent of an Urban Wastewater Treatment Plant by an Isolated Green Microalga

Microalgae are photosynthetic microorganisms and are considered excellent candidates for a wide range of biotechnological applications, including the removal of nutrients from urban wastewaters, which they can recover and convert into biomass. Microalgae-based systems can be integrated into conventional urban wastewater treatment plants (WW-TP) to improve the water depuration process. However, microalgal strain selection represents a crucial step for effective phytoremediation. In this work, a microalga isolated from the effluent derived from the thickening stage of waste sludge of an urban WW-TP was selected and tested to highlight its potential for nutrient removal. Ammonium and phosphate abatements by microalgae were evaluated using both the effluent and a synthetic medium in a comparative approach. Parallelly, the isolate was characterized in terms of growth capability, morphology, photosynthetic pigment content and photosystem II maximum quantum yield. The isolated microalga showed surprisingly high biomass yield and removal efficiency of both ammonium and phosphate ions from the effluent but not from the synthetic medium. This suggests its clear preference to grow in the effluent, linked to the overall characteristics of this matrix. Moreover, biomass from microalgae cultivated in wastewater was enriched in photosynthetic pigments, polyphosphates, proteins and starch, but not lipids, suggesting its possible use as a biofertilizer.

Removal of nutrients from Organic Liquid Agricultural Waste using filamentous algae

A feasibility analysis of tertiary treatment for Organic Liquid Agricultural Waste is presented using filamentous algae belonging to the genus Cladophora sp. as an alternative to chemical tertiary treatment. The main advantages of tertiary treatments that use biological systems are the low cost investment and the minimal dependence on environmental variables. In this work we demonstrate that filamentous algae reduces the nutrient load of nitrate (circa 75%) and phosphate (circa 86%) from the organic waste effluents coming from dairy farms after nine days of culture, with the added advantage being that after the treatment period, algae removal can be achieved by simple procedures. Currently, the organic wastewater is discarded into fields and local streams. However, the algae can acquire value as a by-product since it has various uses as compost, cellulose, and biogas. A disadvantage of this system is that clean water must be used to achieve enough water transparency to allow algae growth. Even so, the nutrient reduction system of the organic effluents proposed is friendly to the ecosystem, compared to tertiary treatments that use chemicals to precipitate and collect nutrients such as nitrates and phosphates.

Fixing the Broken Phosphorus Cycle: Wastewater Remediation by Microalgal Polyphosphates

Phosphorus (P), in the form of phosphate derived from either inorganic (Pi) or organic (Po) forms is an essential macronutrient for all life. P undergoes a biogeochemical cycle within the environment, but anthropogenic redistribution through inefficient agricultural practice and inadequate nutrient recovery at wastewater treatment works have resulted in a sustained transfer of P from rock deposits to land and aquatic environments. Our present and near future supply of P is primarily mined from rock P reserves in a limited number of geographical regions. To help ensure that this resource is adequate for humanity's food security, an energy-efficient means of recovering P from waste and recycling it for agriculture is required. This will also help to address excess discharge to water bodies and the resulting eutrophication. Microalgae possess the advantage of polymeric inorganic polyphosphate (PolyP) storage which can potentially operate simultaneously with remediation of waste nitrogen and phosphorus streams and flue gases (CO2, SOx, and NOx). Having high productivity in photoautotrophic, mixotrophic or heterotrophic growth modes, they can be harnessed in wastewater remediation strategies for biofuel production either directly (biodiesel) or in conjunction with anaerobic digestion (biogas) or dark fermentation (biohydrogen). Regulation of algal P uptake, storage, and mobilization is intertwined with the cellular status of other macronutrients (e.g., nitrogen and sulphur) in addition to the manufacture of other storage products (e.g., carbohydrate and lipids) or macromolecules (e.g., cell wall). A greater understanding of controlling factors in this complex interaction is required to facilitate and improve P control, recovery, and reuse from waste streams. The best understood algal genetic model is Chlamydomonas reinhardtii in terms of utility and shared resources. It also displays mixotrophic growth and advantageously, species of this genus are often found growing in wastewater treatment plants. In this review, we focus primarily on the molecular and genetic aspects of PolyP production or turnover and place this knowledge in the context of wastewater remediation and highlight developments and challenges in this field.

Optimization of alginate bead size immobilized with Chlorella vulgaris and Chlamydomonas reinhardtii for nutrient removal

Photo-bioreactor experiments using three different size beads (2.0, 3.5, and 5.0 mm) immobilized with two different types of microalgae namely Chlorella vulgaris and Chlamydomonas reinhardtii were conducted to evaluate the nutrient removal efficiency. The highest nutrient removal was obtained at gel bead pore size of 3.5 mm for both species of C. vulgaris and Ch. reinhardtii. 95% removal of T-N and complete reduction of T-P were achieved within 3 stages of treatment in photo-bioreactors containing 20% algal bead volume fraction. Moreover, the results observed by confocal laser scanning microscopy (CLSM) using SYTOX red dye and SYTOX green dye in alginate beads indicated that the effective depth of C. vulgaris and Ch. reinhardtii was about 3.6 mm and 3.0 mm, respectively. This optimized cell immobilization technology would accelerate the nutrient uptake rate of microalgae for improving efficiency of wastewater treatment systems.

Campus Sewage Treatment by Golenkinia SDEC-16 and Biofuel Production under Monochromic Light

The integration of microalgal cultivation in wastewater can fulfill the dual roles of pollutant degradation and biomass output. Meanwhile, the LED lights with different wavelengths have a great effect on the growth and metabolism of microalgae. In this study, Golenkinia SDEC-16, a strain isolated for biofuel production, was evaluated to verify its potentials for campus sewage treatment and lipid accumulation under the red, green, and blue lights. The results indicated that the treated campus sewage met the first grade level in the Chinese pollutant discharge standards for municipal wastewater treatment plants within seven days under both red and blue light. The green light failed to exhibit excellent performance in nutrient removal, but facilitated the lipid synthesis as high as 42.99 ± 3.48%. The increased lipid content was achieved along with low biomass accumulation owing to low effective light utilization, indicating that the green light could be merely used as a stimulus strategy. The red light benefited the photosynthesis of Golenkinia SDEC-16, with the maximal biomass concentration of 0.80 ± 0.03 g/L and lipid content of 36.90 ± 3.62%, which can attain the optimal balance between biomass production and lipid synthesis.

Biological wastewater treatment: Comparison of heterotrophs (BFT) with autotrophs (ABFT) in aquaculture systems

The present study was conducted to compare wastewater purification capacities between heterotrophs (BFT) and autotrophs (ABFT) and to evaluate the effects on the growth of fish (Nile tilapia, Oreochromis niloticus) in aquaculture systems. The wastewater treatment capacity of heterotrophs is far superior to that of autotrophs, but the BFT system requires more energy for aquaculture than does the ABFT system. Regardless, both systems effected positive influences on fish growth performance, showing excellent water-purification capacities compared with the control group (CON). No significant differences were found between CON and ABFT or between ABFT and BFT, but there were significant differences between CON and BFT. Both systems BFT and ABFT were revealed to be cost effective in relation to CON, having reduced water replacement by 82%. Therefore, the BFT and ABFT systems could be economical aquaculture systems if due advantage is taken of what both have to offer.

Characteristics of external carbon uptake by microalgae growth and associated effects on algal biomass composition

Water eutrophication may be affected not only by nutrients but also the coexisting organic carbon. In order to reveal the effect of external carbon on algal growth, an experimental study was conducted using Chlorella vulgaris as the representative microalgae to investigate their growth under varied N and P levels with/without added glucose at TOC = 18 mg/L. The TOC consumption by microalgae growth depended much on N and P concentrations and N/P ratio especially when P was sufficient. This ultimately increased the specific growth rate and resulted in higher N and P accumulations but lower carbon fixation in algal biomass in contrast to non-TOC addition. The biomass dry weight became much lower with TOC addition, along with an apparent change of algal composition shown by the much lower chlorophyll contents in the microalgae cells, which might associate the extent of two carbon fixation pathways - anabolism vs catabolism.

Impact of surface tension of wastewater on biofilm formation of microalgae Chlorella sp

The organic matter and surfactants in wastewater may cause variations in the surface tension of wastewater (STW) ranging between ∼40 and ∼70 mJ·m^-2. This study focused on the influence of STW on microalgae biofilm formation. A theoretical analysis was first conducted, and then microalgae biofilm formation on hydrophilic and hydrophobic substrata in liquid and real wastewater with different surface tensions was studied. The results demonstrated that STW affected microalgae biofilm formation remarkably. When the surface tension of liquid medium (γ^lv) was approximately equal to the average value of surface free energy of microalgae and substrata, biofilm formation reached the minimum. Microalgae biofilm formation on a hydrophilic surface first decreased (from ∼2200 to ∼1500 cells/mm²) and then increased (from ∼1500 to 3100 cells/mm²) with the decrease in γ^lv (from ∼70 to ∼40 mJ·m^-2), whereas biofilm on a hydrophobic surface continued to decrease (from ∼2500 to 1000 cells/mm²).