C-phycocyanin extraction from two freshwater cyanobacteria by freeze thaw and pulsed electric field techniques to improve extraction efficiency and purity

Role of cultivation parameters in carbohydrate accretion for production of bioethanol and C-phycocyanin from a marine cyanobacterium Leptolyngbya valderiana BDU 41001: A sustainable approach

The investigation aimed to augment carbohydrate accumulation in the marine cyanobacterium Leptolyngbya valderiana BDU 41001 to facilitate bioethanol production. Under the standardised physiochemical condition (SPC), i.e. 90 µmol photon m-2 s-1 light intensity, initial culture pH 8.5, 35 °C temperature and mixing at 150 rpm increased the carbohydrate productivity ∼70 % than the control, while a 47 % rise in content was obtained under the nitrate (N)-starved condition. Therefore, a two-stage cultivation strategy was implemented, combining SPC at the 1st stage and N starvation at the 2nd stage, resulting in 80 % augmentation of carbohydrate yield, which enhanced the bioethanol yield by ∼86 % as compared to the control employing immobilised yeast fermentation. Moreover, biomass utilisation was maximised by extracting C-phycocyanin, where a ∼77 % rise in productivity was recorded under the SPC. This study highlights the potential of L. valderiana for pilot-scale biorefinery applications, advancing the understanding of sustainable biofuel production.

Effects of light quality and intensity on phycobiliprotein productivity in two Leptolyngbya strains isolated from southern Bahia's Atlantic Forest

Cyanobacterial phycocyanin and phycoerythrin are gaining commercial interest due to their nutrition and healthcare values. This research analyzed the biomass accumulation and pigment production of two strains of Leptolyngbya under different combinations of light colors and intensities. The results showed that while Leptolyngbya sp.4 B1 (B1) produced all phycobiliproteins, Leptolyngbya sp.5 F2 (F2) only had phycocyanin and allophycocyanin. Both the color of the light and its light intensity affect the biomass accumulation and phycoerythrin concentration in strain B1. Although white light at medium intensity (50 μmol m-2 s-1) causes greater biomass accumulation (1.66 ± 0.13 gDW L-1), low-intensity (25 μmol m-2 s-1) green light induces lower biomass accumulation with twice the pigment content (87.70 ± 2.46 mg gDW -1), culminating in 71% greater productivity. In contrast, for the F2 strain, light intensity positively influenced biomass and pigment accumulation, being observed 2.25 ± 0.10 gDW L-1 under white light at 100 μmol m-2 s-1 and higher phycocyanin concentration (138.38 ± 3.46 mg gDW -1) under red light at 100 μmol m-2 s-1. These findings provide insights into optimizing the growth conditions by altering the intensity and wavelength of light for future production of phycocyanin and phycoerythrin from local cyanobacteria.

Optimizing Phycocyanin Extraction from Cyanobacterial Biomass: A Comparative Study of Freeze-Thaw Cycling with Various Solvents

Cyanobacterial phycocyanin pigment is widely utilized for its properties in various industries, including food, cosmetics, and pharmaceuticals. Despite its potential, challenges exist, such as extraction methods impacting yield, stability, and purity. This study investigates the impact of the number of freeze-thaw (FT) cycles on the extraction of phycocyanin from the wet biomass of four cyanobacteria species (Arthrospira platensis, Chlorogloeopsis fritschii, Phormidium sp., and Synechocystis sp.), along with the impact of five extraction solutions (Tris-HCl buffer, phosphate buffer, CaCl2, deionized water, and tap water) at various pH values. Synechocystis sp. exhibited the highest phycocyanin content among the studied species. For A. platensis, Tris-HCl buffer yielded maximum phycocyanin concentration from the first FT cycle, while phosphate buffer provided satisfactory results from the second cycle. Similarly, Tris-HCl buffer showed promising results for C. fritschii (68.5% of the maximum from the first cycle), with the highest concentration (~12% w/w) achieved during the seventh cycle, using phosphate buffer. Phormidium sp. yielded the maximum pigment concentration from the first cycle using tap water. Among species-specific optimal extraction solutions, Tris-HCl buffer demonstrated sufficient extraction efficacy for all species, from the first cycle. This study represents an initial step toward establishing a universal extraction method for phycocyanin from diverse cyanobacteria species.

Microalgae Biomass Production from Rice Husk as Alternative Media Cultivation and Extraction of Phycocyanin Using 3D-Printed Ohmic Heating Reactor

Phycocyanin is a highly valued pigment present in Spirulina platensis biomass with applications in the food industry in terms of biorefinery concepts; specifically, its antioxidant and antimicrobial capacity are an advantage that could be incorporated into a food matrix. This study aims to use rice husk as an alternative culture medium for S. platensis biomass growth and phycocyanin extraction by ohmic heating processing using a 3D-printed reactor. S. platensis was cultivated in rice husk extract (RHE) from 0-100% (v/v). The highest content of microalgal biomass was 1.75 ± 0.01 g/L, with a specific growth rate of 0.125 ± 0.01 h-1. For the phycocyanin extraction under an ohmic heating process, a 3D-printed reactor was designed and built. To optimize phycocyanin extraction, a central composite rotatable design (CCDR) was evaluated, with three factors: time (min), temperature (°C), and pH. The highest phycocyanin content was 75.80 ± 0.98 mg/g in S. platensis biomass grown with rice husk extract. Ohmic heating is a promising method for rapid phycocyanin extraction, and rice husk as a culture medium is an alternative for the growth of S. platensis biomass in the integration of second- and third-generation biorefineries.

Effect of dietary Arthrospira platensis phycocyanin on broiler chicken growth performance, physiological status, fatty and amino acid profiles

Background and Aim

Natural antioxidants are crucial for preserving and enhancing the health, survival, reproduction, and reproductive function of poultry. Phycocyanin (PC) is a natural blue food colorant with various health benefits. The aim of this study was to extract Arthrospira platensis phycocyanin (ApPC) from A. platensis using simple and economical methods and investigate the impact of phytocyanin supplementation on the performance and fatty and amino acid profiles of broiler chicks.

Materials and Methods

PC was extracted from A. platensis by freezing and thawing, and optimization conditions such as pH and temperature were applied during storage periods. A total of 270 1-week-old Ross breed broiler chicks were randomly assigned to the following three treatment groups: basal diet supplemented with 0 mg of PC/kg diet (control), basal diet supplemented with 1 g PC/kg diet (T1), and basal diet supplemented with 2 g PC/kg (T2). In a completely randomized design, three cage replicates (30 birds each) were assigned to each of the three groups. The dietary effects of ApPC on growth performance (body weight gain [BWG], body weight [BW], feed intake, feed conversion ratio, serum constituents, and antioxidant indices) in broiler chickens, free amino acids, and fatty acids in muscles were evaluated.

Results

Total BWG and BW increased without a significant effect on the total feed consumption. Serum levels of total proteins and albumin increased with increasing ApPC supplementation. In addition, globulin levels significantly increased. There was a significant decrease in serum total cholesterol levels among the treatments. The activity of antioxidant enzymes (superoxide dismutase, catalase, glutathione, and total antioxidant capacity) is significantly increased. In contrast, an increase in ApPC caused a significant decrease in malondialdehyde. The content and quantity of fatty acids and amino acids in the meat of broiler chicks supplemented with PC varies.

Conclusion

The addition of PC to broiler chicken diets enhances antioxidant activities, BW, BWG, and meets quality requirements.

Saline extraction assisted by ultrasound: a method to obtain purified phycocyanin

The influence of ultrasound intensity and saline solution concentration (NH4Cl and CaCl2) on phycocyanin extraction from Arthrospira platensis was evaluated. The intensity had a significant effect on phycocyanin content and purity, while the saline solution concentration only had an effect on purity. The optimum extraction condition was obtained at 41% of intensity and 8.5 g.L-1 of CaCl2 solution. In this condition, ultrasound promoted cell disruption efficiently, increasing the extraction yield. The combination of ultrasound with CaCl2 solution reduced the co-extraction of chlorophylls and other proteins, providing more purified extracts. The freezing and thawing method was compared to the best condition obtained, and it showed no significant difference for phycocyanin content but better results for purity. Overall, ultrasound treatment may be considered a promising technology to obtain phycocyanin by the food industry without additional purification techniques due to the reduced extraction time, less use of energy, and easy scale-up.

Inhibition of algal blooms by residual antibiotics in aquatic environments: Design, screening, and validation of antibiotic alternatives

Water blooms frequently appear in the aquatic environment with global warming. However, traditional methods for treating water bloom usually require the addition of algaecides, which may lead to secondary environmental pollution problems in the water environment. To solve this problem, researchers have initiated efforts to harness pre-existing chemical substances within aquatic environments to regulate algal blooms, thereby pioneering novel avenues for water body management. Therefore, an integrated approach involving molecular docking, molecular dynamics simulations, three-dimensional quantitative structure-activity relationship (3D-QSAR), and toxicokinetics methods were utilized for the molecular modification of fluoroquinolone antibiotics, to design and screen fluoroquinolone substitutes with improved toxicity of cyanobacteria and green algae, functionality, and environmental friendliness. A total of 143 fluoroquinolone alternatives were designed in this study, and lomefloxacin-6 (LOM6) was found as the optimum alternative to lomefloxacin (LOM), with increased toxicity to cyanobacteria and green algae by 31 % and 72 %. Molecular docking of LOM before and after modification with seven other cyanobacterial and green algal photosynthetic proteins revealed that LOM6 exhibited varying degrees of increased toxicity towards 6 of these photosynthetic proteins, of which 2J96 protein increased the most (136.25 %). It shows that the residual LOM6 in the water environment has a certain inhibitory effect on the algae bloom. In addition, results showed that LOM6 had synergistic toxic effects on cyanobacteria and green algae with other pollutants residual in the aqueous environment, such as trichloroethyl phosphate, triethyl phosphate, perfluorononanoic acid, perfluorooctanoic acid. This indicates that LOM6 has better algal removal effectiveness in aqueous environments where organophosphate flame retardants and perfluorinated compounds exist together. In this paper, a novel method was developed to remove cyanobacteria and green algae in water environment and reduce the secondary pollution through theoretical simulation, which provides theoretical support for the control of water blooms.

Enhancement of phycocyanin productivity and thermostability from Arthrospira platensis using organic acids

Intracellular hyperaccumulation of phycocyanin (PC) and its high susceptibility to degradation at higher temperatures are major challenging problems associated with its production from cyanobacteria. The present study evaluated different concentrations of organic acids (1, 2, and 3 mM) (citric acid, acetic acid, succinic acid, fumaric acid, and oxalic acid) under fed-batch mode on the biomass and phycobiliproteins' production from Arthrospira platensis. Besides they were evaluated at 2.5-7.5 mM as preservative to stabilize PC at high temperatures. The incorporation of 3 mM of succinic acid into the cultivation medium enhanced the biomass and PC productivity to 164.05 and 26.70 mg L-1 day-1, which was ~ 2- and threefold higher than control, respectively. The produced PC in this treatment was food-grade with a 2.2 purity ratio. The use of organic acids also enhanced the thermal stability of PC. Citric acid (7.5 mM) markedly promoted the half-life values of PC to 189.44 min compared to 71.84 min in the control. The thermodynamic analysis confirmed higher thermostability of PC in the presence of organic acids and indicated the endothermic and non-spontaneity of the thermal denaturation process. The findings of the present study confirmed that organic acids could be utilized as cost effective and sustainable compounds for promoting not only phycobiliproteins' production but also the thermostability of PC for potential application in food industry.

Purification and fractionation of phycobiliproteins from Arthrospira platensis and Corallina officinalis with evaluating their biological activities

Phycobiliproteins (PBPs) are a class of water-soluble pigments with a variety of biological functions that are present in red macroalgae and cyanobacterial species. The crude forms of phycocyanin (C-PC) from the blue green alga Arthrospira platensis and allophycocyanin (APC) from the red macroalga Corallina officinalis were extracted and purified by ammonium sulphate precipitation, anion exchange chromatography, and size exclusion chromatography methods, respectively. The obtained C-PC and APC from A. platensis and C. officinalis were 0.31 mg/mL and 0.08 mg/mL, respectively, with molecular masses of "17.0 KDa and 19.0 KDa" and "15.0 KDa and 17.0 KDa" corresponding to α and β subunits, respectively. FT-IR was used to characterize the purified APC and C-PC in order to look into their structures. Highly purified extracts (A620/A280 > 4.0) were obtained from subtractions' PC3 and PC4 that were tested for their biological activities. APC and C-PC crude extracts plus their fractions exhibited potent anti-oxidant in different ratios by using three techniques. PC1 showed high anti-inflammatory (75.99 and 74.55%) and anti-arthritic (78.89 and 76.92%) activities for C. officinalis and A. platensis, respectively compared with standard drugs (72.02 and 71.5%). The methanolic and water extracts of both species showed greater antibacterial efficacy against Gram +ve than Gram -ve marine bacteria. Our study shed light on the potential medical uses of C-PC and APC extracted from the tested species as natural substances in a variety of foods and drugs. Further investigations are required to explore the diverse chemical natures of distinct PBPs from different cyanobacteria and red algae because their amino acid sequences vary among different algal species.

Microalgae: A Promising Source of Bioactive Phycobiliproteins

Phycobiliproteins are photosynthetic light-harvesting pigments isolated from microalgae with fluorescent, colorimetric and biological properties, making them a potential commodity in the pharmaceutical, cosmetic and food industries. Hence, improving their metabolic yield is of great interest. In this regard, the present review aimed, first, to provide a detailed and thorough overview of the optimization of culture media elements, as well as various physical parameters, to improve the large-scale manufacturing of such bioactive molecules. The second section of the review offers systematic, deep and detailed data about the current main features of phycobiliproteins. In the ultimate section, the health and nutritional claims related to these bioactive pigments, explaining their noticeable potential for biotechnological uses in various fields, are examined.

Advanced methods of algal pigments extraction: A review

Algae are exclusively aquatic photosynthetic organisms that are microscopic or macroscopic, unicellular or multicellular and distributed across the globe. They are a potential source of food, feed, medicine and natural pigments. A variety of natural pigments are available from algae including chlorophyll a, b, c d, phycobiliproteins, carotenes and xanthophylls. The xanthophylls include acyloxyfucoxanthin, alloxanthin, astaxanthin, crocoxanthin, diadinoxanthin, diatoxanthin, fucoxanthin, loroxanthin, monadoxanthin, neoxanthin, nostoxanthin, perdinin, Prasinoxanthin, siphonaxanthin, vaucheriaxanthin, violaxanthin, lutein, zeaxanthin, β-cryptoxanthin, while carotenes include echinenone, α-carotene, β-carotene, γ-carotene, lycopene, phytoene, phytofluene. These pigments have applications as pharmaceuticals and nutraceuticals and in the food industry for beverages and animal feed production. The conventional methods for the extraction of pigments are solid-liquid extraction, liquid-liquid extraction and soxhlet extraction. All these methods are less efficient, time-consuming and have higher solvent consumption. For a standardized extraction of natural pigments from algal biomass advanced procedures are in practice which includes Supercritical fluid extraction, Pressurized liquid extraction, Microwave-assisted extraction, Pulsed electric field, Moderate electric field, Ultrahigh pressure extraction, Ultrasound-assisted extraction, Subcritical dimethyl ether extraction, Enzyme assisted extraction and Natural deep eutectic solvents. In the present review, these methods for pigment extraction from algae are discussed in detail.

Impact of Biomass Drying Process on the Extraction Efficiency of C-Phycoerythrin

Drying the biomass produced is one of the critical steps to avoid cell degradation; however, its high energy cost is a significant technological barrier to improving this type of bioprocess's technical and economic feasibility. This work explores the impact of the biomass drying method of a strain of Potamosiphon sp. on the extraction efficiency of a phycoerythrin-rich protein extract. To achieve the above, the effect of time (12-24 h), temperature (40-70 °C), and drying method (convection oven and dehydrator) were determined using an I-best design with a response surface. According to the statistical results, the factors that most influence the extraction and purity of phycoerythrin are temperature and moisture removal by dehydration. The latter demonstrates that gentle drying of the biomass allows removing the most significant amount of moisture from the biomass without affecting the concentration or quality of temperature-sensitive proteins.

A Chitosan-Based Flocculation Method for Efficient Recovery of High-Purity B-Phycoerythrin from a Low Concentration of Phycobilin in Wastewater

Increasing the yield and purity of B-phycoerythrin (B-PE) can improve the economic state of microalgae industrial processing. One method of cost reduction involves the recovery of remaining B-PE from wastewater. In this study, we developed a chitosan (CS)-based flocculation technique for the efficient recovery of B-PE from a low concentration of phycobilin in wastewater. We investigated the effects of the molecular weight of chitosan, B-PE/CS mass ratio, and solution pH on the flocculation efficiency of CS and the effects of phosphate buffer concentration and pH on the recovery rate of B-PE. The maximum flocculation efficiency of CS, recovery rate, and purity index of B-PE were 97.19% ± 0.59%, 72.07% ± 1.37%, and 3.20 ± 0.025 (drug grade), respectively. The structural stability and activity of B-PE were maintained during the recovery process. Economic evaluation revealed that our CS-based flocculation method is more economical than the ammonium sulfate precipitation method is. Furthermore, the bridging effect and electrostatic interaction play important roles in B-PE/CS complex flocculation process. Hence, our study provides an efficient and economical method to recover high-purity B-PE from a low concentration of phycobilin in wastewater, which promoted the application of B-PE as a natural pigment protein in food and chemical applications.

Microalgae-Derived Pigments for the Food Industry

In the food industry, manufacturers and customers have paid more attention to natural pigments instead of the synthetic counterparts for their excellent coloring ability and healthy properties. Microalgae are proven as one of the major photosynthesizers of naturally derived commercial pigments, gaining higher value in the global food pigment market. Microalgae-derived pigments, especially chlorophylls, carotenoids and phycobiliproteins, have unique colors and molecular structures, respectively, and show different physiological activities and health effects in the human body. This review provides recent updates on characteristics, application fields, stability in production and extraction processes of chlorophylls, carotenoids and phycobiliproteins to standardize and analyze their commercial production from microalgae. Potential food commodities for the pigment as eco-friendly colorants, nutraceuticals, and antioxidants are summarized for the target products. Then, recent cultivation strategies, metabolic and genomic designs are presented for high pigment productivity. Technical bottlenecks of downstream processing are discussed for improved stability and bioaccessibility during production. The production strategies of microalgal pigments have been exploited to varying degrees, with some already being applied at scale while others remain at the laboratory level. Finally, some factors affecting their global market value and future prospects are proposed. The microalgae-derived pigments have great potential in the food industry due to their high nutritional value and competitive production cost.

Short-term tuning of microalgal composition by exposition to different irradiance and small doses of sulfide

Suitability of microalgae valorization mainly depends on its biochemical composition. Overall, among all microalgal derivatives, pigments currently stand out as the major added-value component. While it is well recognized that microalgal growth conditions strongly affect biomass composition, final tuning of already grown microalgae has been scarcely studied. Herein, pigment crude extract and debris biomass composition of an already grown microalgal consortium was evaluated after a short-term exposure (90 min) to different levels of irradiance (15, 50, 120 μmol m^-2 s^-1) and sulfide concentrations (0, 3.2, 16 mg L^-1). Although lipid, protein, and carbohydrate contents of debris biomass were not decisively modified by the short-term exposures, pigments content of the crude extracts were strongly modified after 90-min exposure at given sulfide and irradiance conditions. Particularly, a higher content of chlorophyll a, chlorophyll b, and total carotenoids was estimated at an optimal sulfide concentration of 5 mg L^-1, and the higher irradiance of 120 μmol m^-2 s^-1. Contrarily, the average irradiation level of 50 μmol m^-2 s^-1 and the absence of sulfide stimulated the production of phycoerythrin and phycocyanin which could be increased by 65 and 50%, respectively. Thus, a final qualitative and quantitative tuning of pigment content is plainly achievable on grown microalgal biomass, in a reduced exposure time, at given irradiance or sulfide conditions.

Biocolorants in food: Sources, extraction, applications and future prospects

Color of a food is one of the major factors influencing its acceptance by consumers. At presently synthetic dyes are the most commonly used food colorant in food industry by providing more esthetically appearance and as a means to quality control. However, the growing concern about health and environmental due to associated toxicity with synthetic food colorants has accelerated the global efforts to replace them with safer and healthy food colorants obtained from natural resources (plants, microorganisms, and animals). Further, many of these biocolorants not only provide myriad of colors to the food but also exert biological properties, thus they can be used as nutraceuticals in foods and beverages. In order to understand the importance of nature-derived pigments as food colorants, this review provides a thorough discussion on the natural origin of food colorants. Following this, different extraction methods for isolating biocolorants from plants and microbes were also discussed. Many of these biocolorants not only provide color, but also have many health promoting properties, for this reason their physicochemical and biological properties were also reviewed. Finally, current trends on the use of biocolorants in foods, and the challenges faced by the biocolorants in their effective utilization by food industry and possible solutions to these challenges were discussed.

CO2 fixation and cultivation of Thermosynechococcus sp. CL-1 for the production of phycocyanin

Cultivation of Cyanobacteria is preferable for CO2 fixation process due to its efficiency and production of beneficial byproducts like phycocyanin. In this study, Thermosynechococcus sp. CL-1 (TCL-1) was cultivated in a 30 L flat panel photobioreactor using a 3-fold-modified Fitzgerald medium with 113.2 mM dissolved inorganic carbon. The highest CO2 fixation rate of 21.98 ± 1.52 mg/L/h was followed by higher lipid content (49.91 % dry weight content or %dwc) than the generated carbohydrate (24.22 %dwc). TCL-1 also potentially produced phycocyanin that was dominated by C-phycocyanin (98.10 ± 6.67 mg/g) along with a lower amount of allophycocyanin and phycoerythrin under extraction using various types of solvent. Stability of phycocyanin extract was further examined during storage under various temperatures and light illuminations. Extraction with 36 % glucose solvent presented a protective effect to phycocyanin from heat and photo-damage which was proven by the kinetics study of phycocyanin degradation in this study.

Microalgae-Based Biorefineries: Challenges and Future Trends to Produce Carbohydrate Enriched Biomass, High-Added Value Products and Bioactive Compounds

Simple Summary

Microalgae-based biorefineries allow the simultaneous production of microalgae biomass enriched in a particular macromolecule and high-added and low-value products if a proper selection of the microalgae species and the cultivation conditions are adequate for the purpose. This review discusses the challenges and future trends related to microalgae-based biorefineries stressing the multi-product approach and the use of raw wastewater or pretreated wastewater to improve the cost-benefit ratio of biomass and products. Emphasis is given to the production of biomass enriched in carbohydrates. Microalgae-bioactive compounds as potential therapeutical and health promoters are also discussed. Future and novel trends following the circular economy strategy are also discussed.

Abstract

Microalgae have demonstrated a large potential in biotechnology as a source of various macromolecules (proteins, carbohydrates, and lipids) and high-added value products (pigments, poly-unsaturated fatty acids, peptides, exo-polysaccharides, etc.). The production of biomass at a large scale becomes more economically feasible when it is part of a biorefinery designed within the circular economy concept. Thus, the aim of this critical review is to highlight and discuss challenges and future trends related to the multi-product microalgae-based biorefineries, including both phototrophic and mixotrophic cultures treating wastewater and the recovery of biomass as a source of valuable macromolecules and high-added and low-value products (biofertilizers and biostimulants). The therapeutic properties of some microalgae-bioactive compounds are also discussed. Novel trends such as the screening of species for antimicrobial compounds, the production of bioplastics using wastewater, the circular economy strategy, and the need for more Life Cycle Assessment studies (LCA) are suggested as some of the future research lines.

Phycocyanin: A Natural Antioxidant to Combat Free Radicals

:

Various research showed that antioxidants can effectively overcome the damage caused by free radicals to human health. Therefore, antioxidants are identified as one of the main directions in the development of health care and cosmetics products due to high demand in the market. This review mainly focuses on the phycocyanin, a type of natural antioxidant mainly found in cyanobacteria. This mini review summarizes the phycocyanin sources and numerous extraction methods of phycocyanin along with the analytical methods and determine its ability to suppress free radicals. Phycocyanin has been proven to play an important role in scavenging free radicals and enhancing the body’s antioxidant capacity. However, there is a lack of long-term randomized clinical trial results that can be used as evidence in showing the benefits of phycocyanin. The existing phycocyanin extraction methods using solvents, ultrasonic-assisted, freeze-thaw, etc. can extract high-quality phycocyanin efficiently and quickly. Scientists are also trying to incorporate advanced technologies, such as "Industry 4.0" to optimize and enhance the industrial production of phycocyanin. Lastly, this review also describes the difficulties faced during the phycocyanin production or extraction process and financial obstacles in order to achieve the popularization of phycocyanin.

Effect of Different Extraction Methods on Physicochemical Characteristics and Antioxidant Activity of C-Phycocyanin from Dry Biomass of Arthrospira platensis

The effect of four different extraction methods on physicochemical characteristics and functionalities of chloro-phycocyanin (CP) was investigated. Swelling (S-CP), freezing and thawing (4FT-CP), ultrasonication with freezing and thawing (4FT+U-CP), and the high-pressure cell disruption (HPCD-CP) process affected CP differently, thus resulting in different levels of solubility, DPPH scavenging activity, ABTS scavenging activity, and reducing power. Among the four CPs, HPCD-CP had the highest CP content (15.3%), purity (1.66 ± 0.16), and ∆E value but the lowest ∆b value. The ζ potential of HPCD-CP (−38.8 mV) was the highest, but the average particle size of 4FT+U-CP (719.1 nm) was the highest. UV-Vis absorption spectra and fluorescence spectra illustrated that high-pressure cell disruption-assisted extraction had more profound impacts on the microenvironment of tetrapyrrole chromophores, the environment of aromatic amino acids, and the phycocyanobilin of CP. Furthermore, HPCD-CP and 4FT-CP showed higher solubility and antioxidant activities than S-CP, especially 4FT+U-CP. The results obtained in this study demonstrate that HPCD technology could obtain a food-grade C-phycocyanin product with higher CP concentration, purity, solubility, and antioxidant activity.

Optimization of Phycobiliprotein Solubilization from a Thermotolerant Oscillatoria sp

The present study evaluated the effect of multiple variables (drying time, drying temperature, biomass/solvent ratio, glass beads/biomass ratio, extraction time, and extraction speed) in the solubilization of three different phycobiliproteins (C-PC, APC, and PE) from a thermotolerant Oscillatoria sp. The strain was grown in BG11 media (28 °C, light: dark cycle of 12:12 h at 100 µmol·m−2·s−1, 20 days) and the experiments were conducted according to a two-level randomized factorial design with six center points (38 runs). Results show that biomass/solvent ratio, glass beads/biomass ratio, and extraction time, are the most significant variables in the extraction of all three proteins, whereas the glass beads/biomass ratio and extraction time significantly affect their purity. The optimized conditions allow a statistical increase in the concentration of C-PC, APC, and PE extracted from the biomass; however, the purity was lower in comparison with the expected value. The latter occurs due to a larger biomass/solvent ratio and longer extraction times, which enhanced the solubility of other hydrophilic metabolites (proteins and carbohydrates, etc.).

Commercial Potential of the Cyanobacterium Arthrospira maxima: Physiological and Biochemical Traits and the Purification of Phycocyanin

Simple Summary

Arthrospira maxima is an unbranched, filamentous cyanobacterium rich in important cellular products such as vitamins, minerals, iron, essential amino acids, essential fatty acids, and protein, which has made it one of the most important commercial photoautotrophs. To optimize the growth conditions for the production of target compounds and to ensure profitability in commercial applications, the effects of pH and temperature were investigated. A. maxima has been shown to be tolerant to a range of pH conditions and to exhibit hyper-accumulation of phycoerythrin and allophycocyanin at low temperatures. These traits may offer significant advantages for future exploitation, especially in outdoor cultivation with fluctuating pH and temperature. Our study also demonstrated a new method for the purification of phycocyanin from A. maxima by using by ultrafiltration, ion-exchange chromatography, and gel filtration, producing PC at 1.0 mg·mL⁻¹ with 97.6% purity.

Abstract

Arthrospira maxima is a natural source of fine chemicals for multiple biotechnological applications. We determined the optimal environmental conditions for A. maxima by measuring its relative growth rate (RGR), pigment yield, and photosynthetic performance under different pH and temperature conditions. RGR was highest at pH 7–9 and 30 °C. Chlorophyll a, phycocyanin, maximal quantum yield (F_v/F_m), relative maximal electron transport rate (rETR_max), and effective quantum yield (Φ_PSII) were highest at pH 7–8 and 25 °C. Interestingly, phycoerythrin and allophycocyanin content was highest at 15 °C, which may be the lowest optimum temperature reported for phycobiliprotein production in the Arthrospira species. A threestep purification of phycocyanin (PC) by ultrafiltration, ion-exchange chromatography, and gel filtration resulted in a 97.6% purity of PC.

High-level production and extraction of C-phycocyanin from cyanobacteria Synechococcus sp. PCC7002 for antioxidation, antibacterial and lead adsorption

Global warming and climate change because carbon dioxide (CO₂) release to atmosphere is the forecasting challenges to human being. We are facing how to overcome the dilemma on the balance between economic and environment, thus taking more efforts on green processes to meet agreement of sustainable society are urgent and crucial. The absorption of CO₂ by microalgae reduces the impact of CO₂ on the environment. In this study, the CO₂ removal efficiency was the highest in the culture of Cyanobacterium Synechococcus sp. PCC7002 (also called blue-green algae), at 2% CO₂ to reach a value of 0.86 g-CO₂/g-DCW. The main product of PCC7002 is C-phycocyanin (C-PC) which regarding to phycobilisome complex in all cyanobacterial species. A 160% increasing C-PC was achieved in the cultivation under 100 μmol/m²/s light intensity, 12:12 light-period with 2% CO₂ at 30 °C. The mix-culture of nitric and ammonia ions had positive effect on the cell growth and C-PC accumulation, thus realized the highest yield of 0.439 g-CPC/g-DCW. Additionally, the partial purified C-PC displayed 89% antioxidant activity of 2,2-diphenyl-1-picryhydrazyl (DPPH) and 11% of superoxide free radical scavenging activity, respectively. The production of C-PC from PCC7002 reduced the CO₂ emission and exhibited antibacterial activity against Escherichia coli and lead ion adsorption at room temperature, which has the great potential for eco-friendly application.

Evaluation of Pulsed Electric Field and Conventional Thermal Processing for Microbial Inactivation in Thai Orange Juice

A pulsed electric field (PEF) is a technology used for microbial inactivation in food and beverages. This study aimed to examine the effect of PEF treatment on microbial inactivation and quality parameters in Thai orange juice (TOJ). The results showed that PEF and conventional thermal pasteurization (CTP) can be performed for inactivation of Staphylococcus aureus and Escherichia coli in TOJ. A 5-log reduction was obtained after 10 pulses of PEF treatment when using and electrical field strength of 30 kV cm⁻¹, and the microbial inactivation by the PEF treatment resulted from the electroporation more than the temperature. Moreover, PEF treatment affects the quality parameters less than CTP. Moreover, PEF treatment did not affect the TOJ quality parameters such as pH, commission international de l’eclairage (CIE), viscosity, and total soluble solid (TSS), but saved vitamin C and all sugar and all mineral (sucrose, glucose, fructose, sodium, lithium, potassium, magnesium, and calcium) values more than CTP treatment.

Acclimation and Characterization of Marine Cyanobacterial Strains Euryhalinema and Desertifilum for C-Phycocyanin Production

This study involves evaluation of two native cyanobacterial strains Euryhalinema and Desertifilum isolated from a mangrove pond in Haikou (China) for their possible phycocyanin (C-PC) production. Maximal growth rate with highest chlorophyll and C-PC accumulation were observed at 28°C and 60 μmol photons m^-2 s^-1 photon flux density for Euryhalinema sp., while for Desertifilum sp. at 32°C and 80 μmol photons m^-2 s^-1. Nitrogen and iron concentration trails revealed that double strength concentration of sodium nitrate and ferric ammonium citrate in original BG11 media increased growth rate and accumulation of C-PC for both strains. Three different C-PC extraction methods were tested. The combined extraction protocol of freeze-thaw and ultrasonication markedly increased the C-PC extraction efficiency and attained the food grade purity (A ₆₂₀/A ₂₈₀ ratio >0.7), whereas a higher C-PC yield was found with Na-phosphate buffer. Furthermore, the clarified crude extract was used to purify C-PC by fractional ammonium sulfate [(NH₄)₂SO₄] precipitation, Sephadex G-25 gel filtration chromatography, and DEAE-sephadex ion exchange chromatography and attained analytical grade purity (A ₆₂₀/A ₂₈₀ ratio >3.9). Taken together, both strains showed their potential to be domesticated for valuable phycocyanin production.

Production, isolation and characterization of C-phycocyanin from a new halo-tolerant Cyanobacterium aponinum using seawater

A halo-tolerant Cyanobacterium aponinum PCC 10605 was applied for the first time to produce high-level C-phycocyanin (C-PC). Combined with chemical extraction with sodium phosphate buffer and physical treatment using high pressure homogenization, a higher titer of C-PC was achieved. The culture conditions were optimized by mixing nitrate and ammonia ions, 2% carbon dioxide, and conditional light intensity. Thus, strain PCC10605 produced the highest titer C-PC of 0.652 g/g-DCW in the N1A2 medium with 10% light intensity and 16:8 light-period on day 7. PCC10605 accumulated 0.51 g-CPC/g-DCW at 20 g/L NaCl, while it grew normally in seawater with 30 g/L salinity, thus confirmed that PCC10605 was halo-tolerant strain. Besides, PCC10605 survived in 0.12 g/L phosphate medium that has never been reported. Finally, the purified C-PC exhibited DPPH, superoxide scavenging activity and antibacterial activity, which displayed 87.6%, and 18.7% removal of free radical, and 1.98 cm of inhibition zone for Escherichia coli.

Exploring the Potential of Icelandic Seaweeds Extracts Produced by Aqueous Pulsed Electric Fields-Assisted Extraction for Cosmetic Applications

A growing concern for overall health is driving a global market of natural ingredients not only in the food industry but also in the cosmetic field. In this study, a screening on potential cosmetic applications of aqueous extracts from three Icelandic seaweeds produced by pulsed electric fields (PEF) was performed. Produced extracts by PEF from Ulva lactuca, Alaria esculenta and Palmaria palmata were compared with the traditional hot water extraction in terms of polyphenol, flavonoid and carbohydrate content. Moreover, antioxidant properties and enzymatic inhibitory activities were evaluated by using in vitro assays. PEF exhibited similar results to the traditional method, showing several advantages such as its non-thermal nature and shorter extraction time. Amongst the three Icelandic species, Alaria esculenta showed the highest content of phenolic (mean value 8869.7 µg GAE/g dw) and flavonoid (mean value 12,098.7 µg QE/g dw) compounds, also exhibiting the highest antioxidant capacities. Moreover, Alaria esculenta extracts exhibited excellent anti-enzymatic activities (76.9, 72.8, 93.0 and 100% for collagenase, elastase, tyrosinase and hyaluronidase, respectively) for their use in skin whitening and anti-aging products. Thus, our preliminary study suggests that Icelandic Alaria esculenta-based extracts produced by PEF could be used as potential ingredients for natural cosmetic and cosmeceutical formulations.

Phycocyanin, a super functional ingredient from algae; properties, purification characterization, and applications

Phycocyanins (PCYs) are a group of luxuriant bioactive compounds found in blue-green algae with an estimated global market of about US$250 million within this decade. The multifarious markets of PCYs noted by form (e.g. powder or aqueous forms), by grade (e.g. analytical, cosmetic, or food grades), and by application (such as biomedical, diagnostics, beverages, foods, nutraceuticals and pharmaceuticals), show that the importance of PCYs cannot be undermined. In this comprehensive study, an overview on PCY, its structure, and health-promoting features are diligently discussed. Methods of purification including chromatography, ammonium sulfate precipitation and membrane filtration, as well as characterization and measurement of PCYs are described. PCYs could have many applications in food colorants, fluorescent markers, nanotechnology, nutraceutical and pharmaceutical industries. It is concluded that PCYs offer significant potentials, although more investigations regarding its purity and safety are encouraged.

Assessment of Phycocyanin Extraction from Cyanidium caldarium by Spark Discharges, Compared to Freeze-Thaw Cycles, Sonication, and Pulsed Electric Fields

Phycocyanin is a blue colored pigment, synthesized by several species of cyanobacteria and red algae. Besides the application as a food-colorant, the pigmented protein is of high interest as a pharmaceutically and nutritionally valuable compound. Since cyanobacteria-derived phycocyanin is thermolabile, red algae that are adapted to high temperatures are an interesting source for phycocyanin extraction. Still, the extraction of high quality phycocyanin from red algae is challenging due to the strong and rigid cell wall. Since standard techniques show low yields, alternative methods are needed. Recently, spark discharges have been shown to gently disintegrate microalgae and thereby enable the efficient extraction of susceptible proteins. In this study, the applicability of spark discharges for phycocyanin extraction from the red alga Cyanidium caldarium was investigated. The efficiency of 30 min spark discharges was compared with standard treatment protocols, such as three times repeated freeze-thaw cycles, sonication, and pulsed electric fields. Input energy for all physical methods were kept constant at 11,880 J to ensure comparability. The obtained extracts were evaluated by photometric and fluorescent spectroscopy. Highest extraction yields were achieved with sonication (53 mg/g dry weight (dw)) and disintegration by spark discharges (4 mg/g dw) while neither freeze-thawing nor pulsed electric field disintegration proved effective. The protein analysis via LC-MS of the former two extracts revealed a comparable composition of phycobiliproteins. Despite the lower total concentration of phycocyanin after application of spark discharges, the purity in the raw extract was higher in comparison to the extract attained by sonication.

Non-thermal Technologies for Food Processing

Food is subjected to various thermal treatments during processes to enhance its shelf-life. But these thermal treatments may result in deterioration of the nutritional and sensory qualities of food. With the change in the lifestyle of people around the globe, their food needs have changed as well. Today's consumer demand is for clean and safe food without compromising the nutritional and sensory qualities of food. This directed the attention of food professionals toward the development of non-thermal technologies that are green, safe, and environment-friendly. In non-thermal processing, food is processed at near room temperature, so there is no damage to food because heat-sensitive nutritious materials are intact in the food, contrary to thermal processing of food. These non-thermal technologies can be utilized for treating all kinds of food like fruits, vegetables, pulses, spices, meat, fish, etc. Non-thermal technologies have emerged largely in the last few decades in food sector.

Extraction of Pigments from Microalgae and Cyanobacteria—A Review on Current Methodologies

Pigments from microalgae and cyanobacteria have attracted great interest for industrial applications due to their bioactive potential and their natural product attributes. These pigments are usually sold as extracts, to overcome purification costs. The extraction of these compounds is based on cell disruption methodologies and chemical solubility of compounds. Different cell disruption methodologies have been used for pigment extraction, such as sonication, homogenization, high-pressure, CO2 supercritical fluid extraction, enzymatic extraction, and some other promising extraction methodologies such as ohmic heating and electric pulse technologies. The biggest constrain on pigment bioprocessing comes from the installation and operation costs; thus, fundamental and applied research are still needed to overcome such constrains and give the microalgae and cyanobacteria industry an opportunity in the world market. In this review, the main extraction methodologies will be discussed, taking into account the advantages and disadvantages for each kind of pigment, type of organism, cost, and final market.

Enhancement of Phycobiliprotein Accumulation in Thermotolerant Oscillatoria sp. through Media Optimization

Phycobiliproteins (PBPs) are a group of brilliant pigment proteins found in cyanobacteria and red algae; their synthesis and accumulation depend on several factors such as the type of strain employed, nutrient concentration, light intensity, light regimes, and others. This study evaluates the effect of macronutrients (citrate buffer, NaNO₃, K₂HPO₄, MgSO₄, CaCl₂, Na₂CO₃, and EDTA) and the concentration of trace metals in BG-11 media on the accumulation of PBPs in a thermotolerant strain of Oscillatoria sp. The strain was grown in BG-11 media at 28 °C with a light:dark cycle of 12:12 h at 100 μmol m^-2 s^-1 for 15 days, and the effect of nutrients was evaluated using a Plackett-Burman Design followed by optimization using a response surface methodology. Results from the concentration of trace metals show that it can be reduced up to half-strength in its initial concentration without affecting both biomass and PBPs. Results from the Plackett-Burman Design revealed that only NaNO₃, Na₂CO₃, and K₂HPO₄ show a significant increase in PBP production. Optimization employed a central Non-Factorial Response Surface Design with three levels and four factors (3⁴) using NaNO₃, Na₂CO₃, K₂HPO₄, and trace metals as variables, while the other components of BG-11 media (citrate buffer, MgSO₄, CaCl₂, and EDTA) were used in half of their initial concentration. Results from the optimization show that interaction between Na₂CO₃ and K₂HPO₄ highly increased PBPs' concentration, with values of 15.21, 3.95, and 1.89 (% w/w), respectively. These results demonstrate that identifying and adjusting the concentration of critical nutrients can increase the concentration of PBPs up to two times for phycocyanin and allophycocyanin while four times for phycoerythrin. Finally, the reduction in non-key nutrients' concentration will reduce the production costs of colorants at an industrial scale and increase the sustainability of the process.

Quantification of Moss-Associated Cyanobacteria Using Phycocyanin Pigment Extraction

In the boreal forest, cyanobacteria can establish associations with feather moss and realize the biological nitrogen fixation (BNF) reaction, consisting in the reduction of atmospheric dinitrogen into bioavailable ammonium. In this ecosystem, moss-associated cyanobacteria are the main contributors to BNF by contributing up to 50% of new N input. Current environmental changes driven by anthropogenic activities will likely affect cyanobacteria activity (i.e., BNF) and populations inhabiting mosses, leading to potential important consequences for the boreal forest. Several methods are available to efficiently measure BNF activity, but quantifying cyanobacteria biomass associated with moss is challenging because of the difficulty to separate bacteria colonies from the host plant. Attempts to separate cyanobacteria by shaking or sonicating in water were shown to be poorly efficient and repeatable. The techniques commonly used, microscopic counting and quantitative PCR (qPCR) are laborious and time-consuming. In aquatic and marine ecosystems, phycocyanin (PC), a photosynthesis pigment produced by cyanobacteria, is commonly used to monitor cyanobacteria biomass. In this study, we tested if PC extraction and quantification can be used to estimate cyanobacteria quantity inhabiting moss. We report that phycocyanin can be easily extracted from moss by freeze/thaw disturbance of cyanobacteria cells and can be quickly and efficiently measured by spectrofluorometry. We also report that phycocyanin extraction is efficient (high recovery), repeatable (relative SD < 13%) and that no significant matrix effects were observed. As for aquatic systems, the main limitation of cyanobacteria quantification using phycocyanin is the difference of cellular phycocyanin content between cyanobacteria strains, suggesting that quantification can be impacted by cyanobacteria community composition. Nonetheless, we conclude that phycocyanin extraction and quantification is an easy, rapid, and efficient tool to estimate moss-associated cyanobacteria number.

Production of phycobiliprotein and carotenoid by efficient extraction from Thermosynechococcus sp. CL-1 cultivation in swine wastewater

In this study, the performance of TCL-1 cultivation in swine wastewater was observed under various light intensity, treatment type of swine wastewater, and initial biomass concentration. Furthermore, pigments production (phycobiliprotein and carotenoid), was the main target in this study along with optimum extraction method. Under the cultivation in the anoxic treated swine wastewater (ATSW), highest biomass increment (1.001 ± 0.104 g/L) was achieved with 2 g/L initial biomass concentration and 1,000 µE/m²/s light intensity whereas cultivation in the anoxic and aerobic treated swine wastewater (AATSW) presented better performance on pigments production with the highest production in allophycocyanin which reached 12.07 ± 0.3% dwc. Extraction time and ultrasonication have significant influence on the phycobiliprotein extraction, yet different temperature and incubation time give similar extraction result for β-carotene. Carotenoids production with AATSW cultivation were two times higher than the cultivation in ATSW. However, ammonium-N degradation was performed better in the ATSW cultivation.

Effect of light colour and photoperiod on biomass growth and phycocyanin production by Synechococcus PCC 6715

The effect of light colour and light regime on growth and production of the thermostable C-phycocyanin (PC) by the thermophilic cyanobacterium Synechococcus 6715 in the tubular photobioreactor has been analysed. The highest specific growth rate (1.918 d-1) and biomass concentration (5.11 gVS ⋅L-1) were observed under constant illumination of the red light. However, the PC concentration in volatile solids (e.g blue light 30.68 ± 0.8 mgPC⋅gVS-1 PP and 21.7 ± 1 mgPC⋅gVS-1 CI) as well as per photobioreactor unit volume (e.g red light 122.66 ± 2.28 mgPC⋅L-1 PP and 74.71 ± 8.43 mgPC⋅L-1 PP) was higher in the 16L:8D photoperiod. The obtained PC purity was higher in the case of photoperiod (≈1.5). PCC6715 lacks genes encoding phycoerythrins what suggests T1 type of pigmentation. Although changes in biomass pigmentation were not significant, the strain was able to adapt its photosystem what can be used in the optimization of PC production by application of different light colours.

Enzymatic Processes Triggered by PEF for Astaxanthin Extraction From Xanthophyllomyces dendrorhous

The aim of this study was to evaluate the potential of pulsed electric fields (PEF) to improve the extraction of the lipid-soluble astaxanthin from fresh biomass of a wild-type (CECT 11028) and mutant (ATCC 74219) Xanthophyllomyces dendrorhous strain using ethanol as solvent. Inactivation and propidium uptake studies revealed that inactivation is a good index for estimated the proportion of irreversible permeabilized cells when inactivation is higher than 70% in the two strains. Ethanol was ineffective for extracting carotenoids from the PEF-treated cells (20 kV/cm, 135 μs) of the two strains. However, after aqueous incubation of PEF-treated X. dendrorhous ATCC 74219 cells for 12 h, up to 2.4 ± 0.05 mg/g dried weight (d.w.) of carotenoids were extracted in ethanol. From total carotenoid extracted, around 84% corresponded to all-trans astaxanthin. The detection and quantification of esterase activity in the supernatant and the relationship between the percentage of esterase activity quantified and the amount of carotenoids extracted indicate that the extraction of astaxanthin was mediated by enzymatic esterase activity triggered by PEF during incubation. On the other hand, the formation of a large lipid globule into the cytoplasm of PEF-treated X. dendrorhous CECT 11028 cells during aqueous incubation prevented carotenoid extraction. The process developed in this investigation represents a more sustainable and greener method that those previously used for extracting astaxanthin from yeast.

Optimization of the Freezing-Thawing Method for Extracting Phycobiliproteins from Arthrospira sp

The freezing-thawing method had been reported to be the best phycobiliprotein extraction technique. However, optimum parameters of this extraction method for Arthrospira sp. (one of the major phycobiliprotein sources) still remained unclear. Hence, this study aimed to optimize the freezing-thawing parameters of phycobiliprotein extraction in Arthrospira sp. (UPMC-A0087). The optimization of the freezing-thawing method was conducted using different solvents, biomass/solvent ratios, temperatures, time intervals and freezing-thawing cycles. The extracted phycobiliproteins were quantified using a spectrophotometric assay. Double distilled water (pH 7) with a 0.50% w/v biomass/solvent ratio was the most efficient solvent in extracting high concentrations and purity of phycobiliproteins from Arthrospira sp. In addition, the combination of freezing at -80 °C (2 h) and thawing at 25 °C (24 h) appeared to be the optimum temperature and extraction time to obtain the highest amount of phycobiliproteins. A minimum of one cycle of freezing and thawing was sufficient for extracting high concentrations of phycobiliproteins. The findings from this study could reduce the cost and labor needed for extracting high quality phycobiliproteins. It also allowed the harvesting of large amounts of valuable phycobiliproteins.