Toxic effects of nano-ZnO on marine microalgae Skeletonema costatum: Attention to the accumulation of intracellular Zn

Neglected negative effect of carbon quantum dots (CQDs) entering the ocean on marine organisms living in different water layers

Carbon quantum dots (CQDs) are well dispersed in water, but their potential risks in the marine environment have not been described. This study characterized CQDs and investigated their biological effects (including growth, photosynthesis and behavioural changes) in three marine organisms living in different water layers (the surface phytoplankton Phaeodactylum tricornutum and zooplankton Artemia salina and the benthic coral Zoanthus sp. at the bottom). The results showed that over 78 % of CQDs were suspended in seawater after 96 h. The biomass and photosynthesis of P. tricornutum were significantly affected, with a maximum reduction of 89.49 % in algal cells. CQDs accumulated in the intestinal tract of A. salina, reducing grazing and filtration rates by up to 71.88 % and 89.46 %, respectively. In contrast, CQD exposure had irreversible effects on the tentacle expansion behaviour of Zoanthus sp. This study helps clarify the environmental effects and ecological risks associated with the release of CQDs into the ocean.

Microplastics: A Real Global Threat for Environment and Food Safety: A State of the Art Review

Microplastics are small plastic particles that come from the degradation of plastics, ubiquitous in nature and therefore affect both wildlife and humans. They have been detected in many marine species, but also in drinking water and in numerous foods, such as salt, honey and marine organisms. Exposure to microplastics can also occur through inhaled air. Data from animal studies have shown that once absorbed, plastic micro- and nanoparticles can distribute to the liver, spleen, heart, lungs, thymus, reproductive organs, kidneys and even the brain (crosses the blood-brain barrier). In addition, microplastics are transport operators of persistent organic pollutants or heavy metals from invertebrate organisms to other higher trophic levels. After ingestion, the additives and monomers in their composition can interfere with important biological processes in the human body and can cause disruption of the endocrine, immune system; can have a negative impact on mobility, reproduction and development; and can cause carcinogenesis. The pandemic caused by COVID-19 has affected not only human health and national economies but also the environment, due to the large volume of waste in the form of discarded personal protective equipment. The remarkable increase in global use of face masks, which mainly contain polypropylene, and poor waste management have led to worsening microplastic pollution, and the long-term consequences can be extremely devastating if urgent action is not taken.

Plastic Waste: Challenges and Opportunities to Mitigate Pollution and Effective Management

The present world is now facing the challenge of proper management and resource recovery of the enormous amount of plastic waste. Lack of technical skills for managing hazardous waste, insufficient infrastructure development for recycling and recovery, and above all, lack of awareness of the rules and regulations are the key factors behind this massive pile of plastic waste. The severity of plastic pollution exerts an adverse effect on the environment and total ecosystem. In this study, a comprehensive analysis of plastic waste generation, as well as its effect on the human being and ecological system, is discussed in terms of source identification with respect to developed and developing countries. A detailed review of the existing waste to energy and product conversion strategies is presented in this study. Moreover, this study sheds light on sustainable waste management procedures and identifies the key challenges to adopting effective measures to minimise the negative impact of plastic waste.

Is hydrodynamic diameter the decisive factor? - Comparison of the toxic mechanism of nSiO2 and mPS on marine microalgae Heterosigma akashiwo

To investigate the toxic mechanism of SiO₂ nanoparticles (nSiO₂) and polystyrene microplastics (mPS) on microalgae Heterosigma akashiwo, growth inhibition tests were carried out. The growth and biological responses of the algae exposed to nSiO₂ (0.5, 1, 1.5, 2, 5, 10 and 30 mg L^-1) and mPS (1, 2, 5, 10, 30 and 75 mg L^-1) were explored in f/2 media for 96 h. It was found that the hydrodynamic diameter of the particles seems to be one of the more important factors to influence the algae. nSiO₂ and mPS with similar hydrodynamic diameters have the similar toxic mechanism on H. akashiwo, and the effects were dose- and time-dependent. High concentrations of micro-/nano-particles (MNPs) could inhibit the growth of algal cells, however, low concentrations of MNPs did not restrict or even promoted the growth of algae, known as "Hormesis" phenomenon. The 96 h-EC20 values of nSiO₂ and mPS on H. akashiwo were 2.69 and 10.07 mg L^-1, respectively, and chlorophyll fluorescence parameters indicated that the microalgal photosynthetic system were inhibited. The hydrophilic surface of nSiO₂ increased the likelihood of nSiO₂ binding to the hydrophilic functional group of microalgae, which may account for the slightly stronger toxic effect of nSiO₂ than mPS. The algae continued to produce reactive oxygen species (ROS) under stress conditions. Total protein (TP) levels reduced, and superoxide dismutase (SOD) and catalase (CAT) levels increased to maintain ROS levels in the cells. The decrease in adenosine triphosphate (ATPase) indicated an impact on cellular energy metabolism. Cell membrane damage, cytoplasm and organelle efflux under stress were confirmed by scanning and transmission electron microscopy (SEM and TEM) images. This study contributes to the understanding of the size effect of MNPs on the growth of marine microalgae.

Photosynthetic, Molecular and Ultrastructural Characterization of Toxic Effects of Zinc in Caulerpa racemosa Indicate Promising Bioremediation Potentiality

Caulerpaceae are unconventional green algae composed of multinucleated, single siphonous cells. The species of Caulerpa are acquiring major scientific interest for both their invasion in the Mediterranean ecological niche and for the production of valuable natural metabolites. Furthermore, the abilities of Caulerpa spp. in the biorecovery of polluted waters were recently investigated. Among heavy metal contaminants in marine systems, zinc (Zn) is considered a critical pollutant, progressively accumulating from plastic leachates. In this study, the responses of Caulerpa racemosa to different levels (5-10 mg L^-1) of Zn were studied for 14 days under laboratory-controlled conditions. Effects of Zn were monitored by measuring the growth rate, photosynthetic efficiency and gene expression. Moreover, the ability of Caulerpa to remove Zn from seawater was monitored. Zn induced detrimental effects by decreasing the relative growth rate (RGR) and maximal PSII photochemical efficiency (F_v/F_m). Moreover, C. racemosa, grown in contaminated seawater, reduced the levels of Zn to a final concentration of 1.026 and 1.932 mg L^-1 after 14 days, thus demonstrating efficient uptake. Therefore, our results characterized the effects of zinc on C. racemosa and the possible role of this alga as being effective in the bioremediation of marine seawater.

Different effecting mechanisms of two sized polystyrene microplastics on microalgal oxidative stress and photosynthetic responses

Increasing marine microplastics (MPs) pollution potentially threatens the stability of phytoplankton community structures in marine environments. MPs toxicities to microalgae are largely determined by particle size, while the size-dependent mechanisms are still not fully understood. In this study, two sizes (0.1 µm and 1 µm) of polystyrene (PS) MPs were used as experimental targets to systemically compare their different effecting mechanisms on the marine model diatom Thalassiosira pseudonana with respect to oxidative stress and photosynthesis. The results indicated the toxicity of 1 µm sized MPs was higher than 0.1 µm sized MPs regarding to population growth. In condition of similar microalgal population inhibition rates, we found more enhanced cellular oxidative stress and cell death happened in the 1 µm MPs treatments, which could be linked to higher zeta potential of 1 µm MPs and more severe cell surface damage; microalgal surface light shading and cellular pigments decline were more obvious in the 0.1 µm MPs treatment, which could be linked to high aggregation abilities of 0.1 µm MPs. Gene expressions supported the morphological and physiological findings on the transcriptional level. Environmental related MPs concentrations (5 μg L^-1) also aroused gene expression changes of T. pseudonana while more changing genes were found under 0.1 µm MPs than 1 µm MPs. These results provide novel insights into the size-dependent mechanisms of MPs toxicity on marine microalgae, as well as their potential influence on the marine environment.

Algal-bacterial consortium mediated system offers effective removal of nitrogen nutrients and antibiotic resistance genes

The sulfonamide antibiotic resistance genes (ARGs) especially sul1 was identified as the dominant in eutrophic water. The performance of Chlorella vulgaris-B. licheniformis consortium toward sul1 removal, total nitrogen (TN) removal, and the mechanism of sul1 removal was investigated. The removal efficiency of exogenous ARGs plasmids carrying sul1 reached (97.2 ± 2.3)%. The TN removal rate reached (98.5 ± 1.2)%. The enhancements of carbon metabolism, nitrogen metabolism, aminoacyl-tRNA biosynthesis, and glycoproteins had significant influences on sul1 and TN removals, under the premise of normal growth of algae and bacteria. The quantitative polymerase chain reaction (qPCR) results suggested that the absolute abundances of sul1 were low in algal-bacterial systems (0 gene copies/mL) compared with individual systems ((1 × 10⁶ ± 15) gene copies/mL). The duplication of sul1 was inhibited in algal cells and bacterial cells. The algal-bacterial consortium seems to be a promising technology for wastewater treatment with a potential to overcome the eutrophication and ARGs challenges.

Synthetical effect of microplastics and chiral drug amphetamine on a primary food source algae Chlorella pyrenoids

The biological effects and fate of the chiral illicit drug amphetamine in the presence and absence of microplastics on freshwater algae (Chlorella pyrenoids), including acute toxicity, growth inhibition, photosynthetic pigment content, oxidative stress, lipid peroxidation, and enantioselective fate were assessed. An agglomeration and the shading effects of microplastics in algae suspension were also determined. Microplastics were observed to increase the toxicity of amphetamine to algae and reduce algae cell growth. Exposed Chlorella pyrenoids exhibited a reduced algae cell counts in an agglomeration test, wherein algae cells decreased between 18% and 56% among treatment groups exposed to 5-50 mg L^-1 of microplastics. The agglomeration test suggested that microplastics might significantly increase the adverse effect on algae. Furthermore, our experiments demonstrated enantioselective degradation of amphetamine in algae, and demonstrated that the S-enantiomer was preferably degraded by algae cells. Adding microplastics to the algae suspension significantly reduced the enantioselectivity, with an EF value of 0.41 compared with amphetamine-alone group (0.34) after 21 d exposure. These results demonstrated the first evidence of microplastics acting as a vehicle to enhance amphetamine toxicity to Chlorella pyrenoids, as well as provided new insights into the co-effect of microplastics and organic contaminants on food source.

Alone and combined toxicity of ZnO nanoparticles and graphene quantum dots on microalgae Gymnodinium

Investigation of ZnO nanoparticles (nano-ZnO) and graphene quantum dots (GQDs) toxicology on dinoflagellate Gymnodinium helps to understand the effects of different surface characteristic nanoparticles on marine algae. The growth and biological responses of the algae exposed to 1, 10, 20 mg L^-1 nano-ZnO and GQDs in f/2 media were explored. Nano-ZnO showed slight effects on algal cells growth, while the growth inhibition rates of Gymnodinium increased as GQDs concentration increasing. Both nanoparticle treatments induced accumulation of reactive oxygen species and activated intracellular antioxidant defensive system, including SOD and ATPase, which were related to the two nanoparticles concentration. Under combined exposure of nano-ZnO and GQDs, the inhibitory effects decreased compared to the single GQDs and showed antagonistic effect. The addition of nano-ZnO could decrease the toxicity of GQDs due to aggregation and sedimentation interaction between nanoparticles. The morphologic change of the cells observed by SEM proved that nanoparticles adsorbed onto the cell surfaces and caused the cell shrinkage.

UV filters and their impact on marine life: state of the science, data gaps, and next steps

Sunscreens containing broad-spectrum ultraviolet (UV) filters play an essential role in protecting the skin against the damage induced by sun overexposure. However, the widespread use of sunscreens and other personal care products containing these filters has led to these compounds being widely detected in the environment and being identified as emerging pollutants in marine waters. Concerns raised by laboratory studies investigating the potential impact of UV filters on coral communities have already led to bans on the use of some sunscreens in a few tourist hotspots. Although UV filter pollution may be just one of the many environmental factors impacting coral health worldwide, the media attention surrounding these studies and the legislative changes may lead patients to question dermatologists about the environmental safety of some sunscreen products. This review provides an overview of current knowledge on the impact of UV filters on marine ecosystems, concentrating on recent studies examining the effects of commonly used filters on organisms at low trophic levels and of how alternative approaches, such as metabolomics, can be used to further assess UV filter ecotoxicity. Current gaps in our knowledge are also discussed, most notably the need to increase our understanding of the longer-term fate and behaviour of UV filters in the marine environment, develop more adapted standardized ecotoxicity tests for a wider range of marine species, and evaluate the impact of UV filters on the marine food web. We then discuss future perspectives for the development of new, more environmentally friendly, filters that may enable the use of the most toxic compounds to be reduced without compromising the effectiveness of sunscreen formulations. Finally, we consider how dermatologists play a key role in educating patients on the need for a balanced approach to sun exposure, sun protection, and conservation of the marine environment.

Optimisation of Biomass Production and Nutritional Value of Two Marine Diatoms (Bacillariophyceae), Skeletonema costatum and Chaetoceros calcitrans

Simple Summary

One of the key constraints that is associated with the production of microalgae biomass and products, is the low yields that are associated with high production costs in microalgae cultivation units. Therefore, the aim of the present work was to improve the biomass productivity of two high-value diatom species, Skeletonema costatum and Chaetoceros calcitrans. To do so, the culture medium that was supplied to the cultures was optimised in a stepwise process, regarding the nutrient’s silicate, nitrate, phosphorus, iron, and micronutrients. For both diatoms, the results that were obtained revealed a significant increase in biomass productivity as well as an improved biochemical profile regarding increased omega-3 fatty acids contents. With this work, the optimise culture media was established for each diatom, thus providing a strategy for lower production costs that were reflected in higher productivities with higher biomass quality. Ultimately this will help improve the application of S. costatum and C. calcitrans in the aquaculture and nutraceutical industries.

Abstract

S. costatum and C. calcitrans are two cosmopolitan high-value centric diatoms, with a rich nutritional profile. The following work optimised the culture medium of S. costatum and C. calcitrans cultures, respectively, in a stepwise process as follows: 2.4 mM and 1.2 mM of silicate, 4 mM of nitrate, 100 µM of phosphate, 20 and 80 µM iron, and 0.5 mL L⁻¹ of micronutrients. The results that were obtained revealed an increase in biomass productivity with a 1.8- and 3.2-fold increase in biomass that was produced by S. costatum and C. calcitrans, respectively. The biochemical profile showed an increase in high-value PUFAs such as 2.6-fold and 2.3-fold increase in EPA for S. costatum and C. calcitrans, respectively, whilst a 2.6-fold increase in DHA was detected in S. costatum cultures. The present work provides the basic tools for the industrial cultivation of S. costatum and C. calcitrans with enhanced productivity as well as improved biomass quality, two factors which are highly relevant for a more effective application of these diatoms to aquaculture and nutraceutical production.

Co-exposures of acid rain and ZnO nanoparticles accelerate decomposition of aquatic leaf litter

The pattern of acid rain is dependent on the ratio of SO₄^2- and NO₃^-, which change may affect the dissolution activity of dull heavy metals in the aquatic environment and further complicate the ongoing challenge of ecosystem stability and increase risks. In this study, we assessed the combined effects of acid rain (SO₄^2-: NO₃^- was 2:1, 1:1, and 1:2) and ZnO nanoparticles (30 ng L^-1) on plant litter decomposition through a microcosm experiment. The highest dissolution of ZnO nanoparticles was achieved when the SO₄^2-: NO₃^- ratio was 1:2, and there were no significant differences among other treatments. The fungal biomass showed significant decreases under acute exposures but tended to be adaptive during chronic exposures. The co-exposure significantly stimulated the activities of leucine-aminopeptidase, glycine-aminopeptidase, polyphenol oxidase, and cellobiohydrolase. Besides, the fungal diversity and the relative abundance of some functional genera (e.g. Anguillospora) were enhanced when the SO₄^2-: NO₃^- ratio was 1:2 and 2:1. In conclusion, the decomposition rate of plant litter was increased by 123-204% by co-exposures. Collectively, the findings underline the importance of considering environmental context to assess nanoparticle toxicity.

The effects of copper ions and copper nanomaterials on the output of amino acids from marine microalgae

In this study, the marine microalgae Skeletonema costatum and Nitzschia closterium were exposed to different forms of copper, such as a metal salt (Cu²⁺), a nano-metal (nano-Cu), and nano-metal oxide (nano-CuO). During a 96-h exposure to nanoparticles (NPs) and salt, the cell number, Cu²⁺ concentration in the culture medium, morphology, and intracellular amino acids were measured to assess the toxicity of the copper materials and the toxicity mechanism of the NPs. As results, the toxicity of Cu²⁺, nano-Cu, and nano-CuO to marine phytoplankton decreased in order. The EC₅₀ values of Cu²⁺ and nano-Cu for S. costatum and N. closterium ranged from 0.356 to 0.991 mg/L and 0.663 to 2.455 mg/L, respectively. Nano-Cu inhibits the growth of marine phytoplankton by releasing Cu²⁺; however, nano-CuO is harmful to microalgae because of the effect of NPs. The secretion of extracellular polymeric substances by microalgae could also affect the toxicity of nano-Cu and nano-CuO to microalgae. S. costatum was more sensitive to copper than N. closterium. Cu²⁺, nano-Cu, and nano-CuO all reduced per-cell amino acids and the total output of algae-derived amino acids by affecting the growth of the phytoplankton. This study helps to understand the risk assessment of nano-Cu and nano-CuO to marine microalgae.

Thermally induced oxygen related defects in eco-friendly ZnFe2O4 nanoparticles for enhanced wastewater treatment efficiencies

Herein, a simple but highly effective strategy of thermal annealing to modulate oxygen vacancies related defects in ZnFe₂O₄ (ZFO) nanoparticles for obtaining enhanced wastewater treatment efficiencies is reported. The as-prepared nanoparticles were thermally annealed at three different temperatures (500 °C, 600 °C and 700 °C) and their phase purity was confirmed by X-ray diffraction (XRD). All samples were found to exhibit pure phases of ZFO with different crystallite sizes ranging from 10 nm to 25 nm. The transmission electron microscope (TEM) images showed well dispersed nanoparticles and a strong correlation of grain size growth with annealing temperature was established. The optical absorption and emission characteristics were estimated through UV-visible and Photoluminescence (PL) spectroscopy. Raman spectroscopy and X-ray Photoelectron Spectroscopy (XPS) confirmed the variation of oxygen vacancies in the synthesized samples' lattice. The photocatalytic activities of all samples were investigated and the highest efficiencies were recorded for the ZFO samples annealed at 500 °C. Under high salinity condition, the organic dye degradation efficiency of the same sample remained the highest among all. The excellent dye degradation abilities in ZFO samples can be attributed to the abundance of oxygen vacancies in the crystal lattice that slow down the recombination rate during the photocatalysis process. Moreover, cytotoxicity tests revealed that all prepared ZFO samples showed insignificant cell structure effects on Picochlorum sp microalgae, as verified by Fourier-transform infrared (FTIR) spectroscopy. On the other hand, no significant changes were detected on the viable cell concentration and Chlorophyll a content. This work presents a systematic way to finely tune the crystal sizes and to modulate oxygen related defects in ZFO through a highly effective annealing approach to signify their potential in industrial wastewater and seawater treatment processes.

Biosorption of Zn(II) from Seawater Solution by the Microalgal Biomass of Tetraselmis marina AC16-MESO

Biosorption refers to a physicochemical process where substances are removed from the solution by a biological material (live or dead) via adsorption processes governed by mechanisms such as surface complexation, ion exchange, and precipitation. This study aimed to evaluate the adsorption of Zn²⁺ in seawater using the microalgal biomass of Tetraselmis marina AC16-MESO “in vivo” and “not alive” at different concentrations of Zn²⁺ (0, 5, 10, and 20 mg L⁻¹) at 72 h. Analysis was carried out by using the Langmuir isotherms and by evaluating the autofluorescence from microalgae. The maximum adsorption of Zn²⁺ by the Langmuir model using the Q_max parameter in the living microalgal biomass (Q_max = 0.03051 mg g⁻¹) was more significant than the non-living microalgal biomass of T. marine AC16-MESO (Q_max = 0.02297 mg g⁻¹). Furthermore, a decrease in fluorescence was detected in cells from T. marina AC16-MESO, in the following order: Zn²⁺ (0 < 20 < 5 < 10) mg L⁻¹. Zn²⁺ was adsorbed quickly by living cells from T. marine AC16-MESO compared to the non-living microalgal biomass, with a decrease in photosystem II activities from 0 to 20 mg L⁻¹ Zn²⁺ in living cells.

The effects and mechanisms of polystyrene and polymethyl methacrylate with different sizes and concentrations on Gymnodinium aeruginosum

In this study, Gymnodinium aeruginosum was exposed to polystyrene (PS) and polymethyl methacrylate (PMMA) of three particle sizes (0.1 μm, 1.0 μm and 100 μm) and two concentrations (10 mg/L and 75 mg/L) for 96 h. The density of algae cells, the endpoints that reactive oxygen species (ROS), total protein (TP), malondialdehyde (MDA), superoxide dismutase (SOD) and catalase (CAT), scanning and transmission electron microscopy (SEM and TEM) were used to explore the toxicity mechanism to the microalgae. At a concentration of 75 mg/L, the 96 h inhibition ratios (IR) with particle sizes of 0.1 μm, 1.0 μm and 100 μm on G. aeruginosum were 55.9%, 63.7% and 6.0% for PS, respectively, and 3.0%, 4.1% and -0.6% for PMMA, respectively. The most significant changes in ROS, TP, MDA, SOD and CAT were observed at 75 mg/L 1.0 μm of PS when treated for 96 h. When exposed to nanoplastics (NPs) and microplastics (MPs), the algae cells were damaged, and the antioxidant system was activated. Extracellular polymeric substance (EPS) could help to detoxify the algae. In general, PS was more toxic than PMMA. The toxicity of small MNPs (0.1 μm and 1.0 μm) was related to the concentrations, while large MNPs (100 μm) did not.

Single and Combined Effects of Cypermethrin and UVR Pre-Exposure in the Microalgae Phaeodactylum Tricornutum

Coastal marine microalgae are exposed to anthropogenic pollutants, including pesticides from aquaculture/agriculture/household uses. Some microalgae species, such as Phaeodactylum tricornutum, can induce and accumulate UV-absorbing compounds (UACs) upon ultraviolet radiation (UVR) exposure to prevent deleterious effects. Tolerance mechanisms activated by natural stressors might also protect organisms from anthropogenic stressors. This work assesses the effects of the insecticide cypermethrin (Cyp) and UVR in the marine microalgae P tricornutum. Considering the pro-oxidant properties of both stressors and UACs' induction in P tricornutum, lethal and sublethal effects of Cyp were tested in cultures with and without UVR acclimation. After a 24-h exposure to 10 μg L^-1 of technical Cyp or culture medium, UACs, growth, glutathione-S-transferase activity (GST), sulfhydryl groups (SH-g), and lipid peroxidation (LPO) were analyzed. Results showed differences in terms of growth between Cyp and Cyp + UVR pre-exposure. UACs' content was induced after UVR acclimation and diminished after 24 h of growth in control and UVR pre-treated cultures, while levels remained constant under Cyp exposure. A single Cyp exposure exerted GST induction, SH-g depletion, and LPO increments. In UVR-acclimatized treatments, oxidative stress responses showed similar or more pronounced effects than the single chemical exposure, suggesting a potential additive effect of the UVR acclimation. The contrasting effects of Cyp + UVR observed between growth and biochemical responses suggest different compensatory mechanisms that need to be further investigated. Also, it highlights the need to include both lethal and sublethal endpoints to understand microalgae's tolerance and its significance in the multiple stressors' context.

Simple Method for the Extraction and Determination of Ti-, Zn-, Ag-, and Au-Containing Nanoparticles in Sediments Using Single-Particle Inductively Coupled Plasma Mass Spectrometry

The quantitative analysis of nanoparticles (NPs) in the environment is significantly important for the exploration of the occurrence, fate, and toxicological behaviors of NPs and their subsequent environmental risks. Some protocols have been recommended for the separation and extraction of NPs that are potentially dispersed in complex environmental matrixes, e.g. sediments and soils, but they remain limited. However, certain factors that may significantly affect extraction efficiency have not been comprehensively explored. In this study, on the basis of the single-particle inductively coupled plasma mass spectrometry (SP-ICP-MS) technique, a simple standardized protocol for separating and analyzing metal-containing NPs in sediment samples was developed. On consideration of the extraction efficiencies of indigenous NPs (Ti- and Zn-NPs) and spiked NPs (Ag- and Au-NPs) in sediments, sedimentation with a settling time of 6 h is recommended for the separation of NPs and large particles, and the optimal sediment to water ratio, ultrasonication power, time, and temperature are 0.4 mg/mL, 285 W, 20 min, and 15-25 °C, respectively. On the basis of the optimized method, the recoveries of spiked Ag and Au-NPs were 71.4% and 81.1%, respectively. The applicability of the optimal protocols was verified, and TOC was proved to be an important factor controlling the separation and extraction of NPs in environmental samples. The separation and extraction of NPs in elevated TOC samples can be improved by increasing the ultrasonication power, time, and temperature.

Review of aquatic toxicity of pharmaceuticals and personal care products to algae

Pharmaceuticals and Personal Care Products (PPCPs) have been frequently detected in the environment around the world. Algae play a significant role in aquatic ecosystem, thus the influence on algae may affect the life of higher trophic organisms. This review provides a state-of-the-art overview of current research on the toxicity of PPCPs to algae. Nanoparticles, contained in personal care products, also have been considered as the ingredients of PPCPs. PPCPs could cause unexpected effects on algae and their communities. Chlorophyta and diatoms are more accessible and sensitive to PPCPs. Multiple algal endpoints should be considered to provide a complete evaluation on PPCPs toxicity. The toxicity of organic ingredients in PPCPs could be predicted through quantitative structure-activity relationship model, whereas the toxicity of nanoparticles could be predicted with limitations. Light irradiation can change the toxicity through affecting algae and PPCPs. pH and natural organic matter can affect the toxicity through changing the existence of PPCPs. For joint and tertiary toxicity, experiments could be conducted to reveal the toxic mechanism. For multiple compound mixture toxicity, concentration addition and independent addition models are preferred. However, there has no empirical models to study nanoparticle-contained mixture toxicity. Algae-based remediation is an emerging technology to prevent the release of PPCPs from water treatment plants. Although many individual algal species are identified for removing a few compounds from PPCPs, algal-bacterial photobioreactor is a preferable alternative, with higher chances for industrial applications.

Toxic effect of p-chloroaniline and butyl acrylateon Nannochloropsis oculata based on water samples from two sea areas

To compare the influence of water samples collected from various areas on toxic effect of HNS, we examined the toxic effect of two commonly found HNS: p-chloroaniline and butyl acrylate, on Nannochloropsis oculata cultured in seawater collected from Laizhou bay and Jiaozhou bay (China). The results showed that both p-chloroaniline and butyl acrylate had significant toxic effect on N. oculata cultured in both water samples. P-chloroaniline inhibited its net oxygenation rate and oxygen consumption rate. Butyl acrylate inhibited the net oxygenation rate whereas significantly stimulated oxygen consumption rate. Performance of N. oculata changed between two water samples under same level of p-chloroaniline and butyl acrylate. The net oxygenation rate of N. oculata cultured in the seawater from the Jiaozhou bay increased by 11.60 %, the oxygen consumption rate increased by 26.91 %, algae cell growth decreased by 16.83 %, compared to those from Laizhou bay. The Fv/Fm of N. oculata cultured in Jiaozhou bay was more significantly inhibited at 0.5 and 2.0 mg L^-1 p-chloroaniline, while it was significantly inhibited at 5. 0 mg L^-1 of butyl acrylate, compared to those from Laizhou bay. Moreover, the toxic effect of both HNS on net oxygenation rate and oxygen consumption rate were significantly attenuated as the concentration increased. The growth inhibition of microalgae cultured in two seawater samples was more evident at 0.5 and 5.0 mg L^-1 p-chloroaniline than at 2.0 mg L^-1 p-chloroaniline,and the growth inhibition of microalgae cultured in two seawater samples was more evident at 2.0 and 5.0 mg L^-1 butyl acrylate than at 0.5 mg L^-1 butyl acrylate. These results indicated that toxic effect of p-chloroaniline and butyl acrylate on the growth of N. oculata was influenced by the pollutants in the two water samples. Consequently, a corresponding research on water sample is required in advance to increase accuracy of future ecological risk assessment of HNS.

Too small to matter? Physicochemical transformation and toxicity of engineered nTiO2, nSiO2, nZnO, carbon nanotubes, and nAg

Engineered nanomaterials (ENMs) refer to a relatively novel class of materials that are increasingly prevalent in various consumer products and industrial applications - most notably for their superlative physicochemical properties when compared with conventional materials. However, consumer products inevitably degrade over the course of their lifetime, releasing ENMs into the environment. These ENMs undergo physicochemical transformations and subsequently accumulate in the environment, possibly leading to various toxic effects. As a result, a significant number of studies have focused on identifying the possible transformations and environmental risks of ENMs, with the objective of ensuring a safe and responsible application of ENMs in consumer products. This review aims to consolidate the results from previous studies related to each stage of the pathway of ENMs from being embodied in a product to disintegration/transformation in the environment. The scope of this work was defined to include the five most prevalent ENMs based on recent projected production market data, namely: nTiO₂, nSiO₂, nZnO, carbon nanotubes, and nAg. The review focuses on: (i) models developed to estimate environmental concentrations of ENMs; (ii) the possible physicochemical transformations; (iii) cytotoxicity and genotoxicity effects specific to each ENM selected; and (iv) a discussion to identify potential gaps in the studies conducted and recommend areas where further investigation is warranted.

Determination of environmental properties and toxicity of octyl-dimethyl-para-aminobenzoic acid and its degradation products

Octyl-dimethyl-para-aminobenzoic acid (ODPABA) is one of compounds of emerging concern. It undergoes transformations under the influence of oxidizing or chlorinating agents and UV radiation forming products with different properties. There is very little experimental data concerning the environmental fate of ODPABA and its transformation products. Therefore, the purpose of the studies was to determine environmental parameters: water solubility, soil - water partition coefficient, octanol - air partition coefficient, bioconcentration factor as well as half-life in air, water and soil. Based on the results obtained, the persistence and migration possibilities of ODPABA and its transformation products in the aquatic environment were estimated. Moreover, the ecological toxicity of oxidation and chlorination products was investigated. Microtox®, Daphtoxkit F® and Artoxkit M® tests were used to determine toxicity. LC₅₀ for Fish and Daphnia magna was calculated by Ecosar module. Studies have shown that as a result of ODPABA transformations, chloroorganic products are formed, which are lipophilic, are bioconcentrated in organic matter, are characterized by significant environmental persistence, can spread over considerable distances and are toxic. Oxidation products have significantly smaller impact on the environment. They are characterized by higher water solubility, lower bioconcentration factor and are less toxic.

Weight-of-evidence process for assessing human health risk of mixture of metal oxide nanoparticles and corresponding ions in aquatic matrices

This study proposed a framework to estimate health risks due to exposure of mixture of nanoparticles (NPs) from surface water, for the first time, as per authors' best knowledge. The framework consisted of hazard identification, exposure assessment, dose-response assessment, risk characterization and risk management steps. Concentrations of mixture of NPs and associated ions were compiled and range of values were used for exposure estimation. The resulting concentrations of nanoparticle and metal ions in simulated digestive fluid were calculated and used to estimate exposure dose to digestive system organs during a hypothetical exposure of water during recreational activity. Exposure doses of different possible combinations of ZnO NP, CuO NP, Zn²⁺ and Cu²⁺ ions were considered. The ECHA weight-of- evidence framework was used for formulating hypotheses and collecting evidence for determining reference dose (RfD) and interaction parameter for estimating hazard interaction value (an index for risk) as per the USEPA modified weight-of-evidence method for estimating risks of binary NPs and ions. RfD values of CuO (0.0262 mg/kg/d) and ZnO NP (0.0315 mg/kg/d) were derived using information from rat-based oral toxicity studies and assumed values of uncertainty factors. The results showed that mixture of NPs under environmentally-relevant conditions do not pose any health risk. The uncertainty analysis indicated that ZnO + CuO + Zn + Cu ion suspension posed the highest risk. The switchover analysis indicated that NP concentration >0.207 mg/L resulted in risk estimate greater than 1 and pose risk. Although risk estimate was found to be smaller than 1 under the studied natural water condition, efforts should be made to continue monitoring mixture of NPs as a precautionary approach. More efforts are required to obtain data on (i)toxicity of mixture of NPs, (ii)their interaction effects, (iii)fractions of NPs reaching target organ in order to accurately predict risk. Potential benefit of this framework is in its usage for development of structure for estimating exposure risks due to mixture of NPs and ions from surface water. This can also be used to adopt methodology for gathering information on evidence required in different steps of risk assessment process, like obtaining RfD/uncertainty factor -related parameters in dose-response assessment step, deriving interaction and mixture toxicity-related parameters in risk estimation step.

Ecotoxicity to Freshwater Organisms and Cytotoxicity of Nanomaterials: Are We Generating Sufficient Data for Their Risk Assessment?

The aim of the present study was to investigate the eco-cytotoxicity of several forms of nanomaterials (NM), such as nano-CuO, nano-TiO₂, nano-SiO₂ and nano-ZnO, on different aquatic species (Raphidocelis subcapitata, Daphnia magna and Lemna minor) following standard protocols and on human cell lines (Caco-2, SV-80, HepG2 and HaCaT). Predicted no-effect concentrations (PNEC) or hazard concentrations for 5% of the species (HC₅) were also estimated based on the compilation of data available in the literature. Most of the NM agglomerated strongly in the selected culture media. For the ecotoxicity assays, nano-CuO and nano-ZnO even in particle agglomeration state were the most toxic NM to the freshwater organisms compared to nano-TiO₂ and nano-SiO₂. Nano-ZnO was the most toxic NM to R. subcapitata and D. magna, while nano-CuO was found to be very toxic to L. minor. Nano-CuO was very toxic to Caco-2 and HepG2 cells, particularly at the highest tested concentrations, while the other NM showed no toxicity to the different cell lines. The HC₅ and PNEC values are still highly protective, due to data limitations. However, the present study provides consistent evidence of the potential risks of both nano-CuO and nano-ZnO against aquatic organisms and also their effects on public health.

Exposure of synthesized Co3O4 nanoparticles to Chlorella minutissima: An ecotoxic evaluation in freshwater microalgae

The current study focuses on the ecotoxicity of cobalt oxide nanoparticles (Co₃O₄ NPs) in the aquatic environment towards freshwater microalgae, Chlorella minutissima. The interaction of Co₃O₄ NPs with microalgae shows the growth suppressing effect. The 72 h EC ₅₀ (effective concentration of a chemical having 50% of its impact) values of Co₃O₄ NPs for C. minutissima was 38.16 ± 1.99 mg/L. The decline in chlorophyll a content and increase in reactive oxygen species (ROS) also indicated the compromised physiological state of microalgae. An increased LDH (lactate dehydrogenase) level in treated samples suggests membrane disintegration by Co₃O₄ NPs. Light microscopy, scanning electron microscopy (SEM) and Energy Dispersive X-Ray-Scanning electron microscopy (EDX-SEM) further confirm cell entrapment and deposition of Co₃O₄ NPs on the cell surface. Cellular internalization of NPs, as shown by Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES), also contributes towards the toxicity of NPs. The findings suggest the role of extracellular as well as intracellular nanoparticles (NPs) in exerting a toxic effect on the C. minutissima.

Growth inhibition of the microalgae Skeletonema costatum under copper nanoparticles with microplastic exposure

In order to investigate the combined toxicities of copper nanoparticles (nano-Cu) with microplastic on microalgae Skeletonema costatum, growth inhibition tests were carried out. The toxic effects of copper nanoparticles and microplastic on the microalgae under singleness and coexistence conditions were investigated. Both copper nanoparticles and microplastic inhibited the growth of S. costatum. The growth inhibition ratio (IR) increased with the increasing of particle concentrations and incubation time. The toxicity of copper nanoparticles was reduced with the addition of microplastic. The concentrations of Cu²⁺ in the medium with or without addition of microplastic were determined. It was found that adsorption of Cu²⁺ on microplastic and aggregation between copper nanoparticles and microplastic are the main reasons for attenuation of toxicity of nano-Cu with adding microplastic. The adhesion and aggregate interactions between microalgae and nanomaterial were also approved by the observations through scanning electron microscopy.

Species-specific sensitivity of three microalgae to sediment elutriates

Microalgae are considered good bioindicators of marine environmental quality. Frequently, they are used to investigate the toxicity of sediment elutriates, but their sensitivity is disputed. This paper compared the sensitivity of Phaeodactylum tricornutum (diatom), Skeletonema costatum (diatom), and Dunaliella tertiolecta (green alga), analyzing 257 samples of elutriates (1:4 sediment: water ratio), considering growth inhibition (72 h) as the reference endpoint and sediment chemical (metals, metalloids and polyaromatic hydrocarbons) and grain size. Results of the toxicity tests showed that the microalgae sensitivity was not correlated. The integration of chemical data did not allow to discriminate toxicity effects but contributed to highlight that D. tertiolecta was the most sensitive microalgae (no cell wall) followed by P. tricornutum and S. costatum. Further analysis, including lines of evidence and weight of evidence approaches to calculate risk quotients of elutriate samples, confirmed these results.

Review on plastic wastes in marine environment - Biodegradation and biotechnological solutions

The marine plastic pollution has drastic effect on marine species. The importance in environmental issues increases the demand to develop a significant technology which does not burden the marine environment or marine life forms. To mitigate the foreseen problems of micro and nanoplastic contamination, different biotechnological solutions has to be considered. Microbial communities exposed to plastic contaminated sites can adapt and form dense biofilms on the plastic surface and produce active catalytic enzymes. These enzymes can be able to degrade the synthetic polymers. In view of their high catalytic activity, microbial enzymes can be applicable for the degradation of synthetic polymers. This review highlights the toxicity of micro and nanoplastics on marine organisms, biodegradation of plastics and futuristic research needs to solve the issues of plastic pollution in marine environment.

Contributions of Zn Ions to ZnO Nanoparticle Toxicity on Microcystis aeruginosa During Chronic Exposure

In this work, we assessed the toxic effects of ZnO nanoparticles (NPs; 1, 10, and 50 mg L^-1) and the corresponding dissoluble Zn ions (0.71, 8.66, and 35.59 mg L^-1) on Microcystis aeruginosa. After chronic exposure (28 days), significantly higher growth inhibition was observed under ZnO NPs at 1 mg L^-1 (47%) than under Zn ions at 0.71 mg L^-1 (-15%). The opposite effect pattern was observed for ZnO NPs at 10 (71% vs. 80%) and 50 mg L^-1 (73% vs. 95%) compared to Zn ions at the corresponding concentrations. After 7 days of exposure, ZnO NPs at 10 and 50 mg L^-1 led to an increase of 83 and 53% in malondialdehyde content, as well as an increase of 106 and 61% in superoxide dismutase activity, respectively. However, Zn ions at the corresponding concentrations showed negligible impacts on the two parameters. The different results indicate that the insoluble NPs during the initial exposure mostly account for lipid peroxidation, which further lead to microalgal antioxidant response. During the subsequent exposure, the contributors of ZnO NP toxicity shift with the concentration and exposure time of ZnO NPs. In conclusion, the study presents new insights into the different contributions of insoluble NPs and dissoluble metallic ions to metallic NP toxicity.

Current methods to monitor microalgae-nanoparticle interaction and associated effects

Widespread use of nanoparticles for different applications has diffused their presence in the environment, particularly in water. Many studies have been conducted to evaluate their effects on aquatic organisms. Microalgae are at the base of aquatic trophic chains. These organisms which can be benthic or pelagic, meaning that they can enter into interaction with all kinds of particulate materials whatever their density, and constitute an interesting model study. The purpose of this review was to gather more than sixty studies on microalgae exposure to the different nanoparticles that may be present in the aquatic environment. After a brief description of each type of nanoparticle (metals, silica and plastic) commonly used in ecotoxicological studies, techniques to monitor their properties are presented. Then, different effects on microalgae resulting from interaction with nanoparticles are described as well as the parameters and techniques for monitoring them. The impacts described in the literature are primarily shading, ions release, oxidative stress, adsorption, absorption and disruption of microalgae barriers. Several parameters are proposed to monitor effects such as growth, photosynthesis, membrane integrity, biochemical composition variations and gene expression changes. Finally, in the literature, while different impacts of nanoparticles on microalgae have been described, there is no consensus on evidence of nanomaterial toxicity with regard to microalgae. A parallel comparison of different nanoparticle types appears essential in order to prioritize which factors exert the most influence on toxicity in microalgae cultures: size, nature, surface chemistry, concentration or interaction time.

Impact of ZnO and ZnS nanoparticles in sewage sludge-amended soil on bacteria, plant and invertebrates

The effect of zinc oxide nanoparticles (ZnO NPs) and zinc sulfide nanoparticles (ZnS NPs) on the toxicity of sewage sludges in sewage sludge-amended soils was investigated with respect to plant- (Lepidium sativum) and soil- (Folsomia candida) species. The toxicity of porewater obtained from the tested soils towards Vibrio fischeri (Microtox®) was also investigated. Two sewage sludges (SSL1 and SSL2) with different organic matter content were amended with nanoparticles. Depending on the type of biotest and the type of sewage sludge, different effects of ZnO or ZnS NPs on the toxicity of sewage sludge-amended soil were observed. In general, ZnO and ZnS NPs stimulated root growth for SSL1 or reduced the harmful impact of SSL2 on the root growth of L. sativum roots. Greater stimulation or inhibition of root growth was observed for the ZnO than ZnS NPs. The unfavorable effect of ZnO/ZnS NPs on F. candida mortality and reproduction was observed at a concentration of ZnO/ZnS in sewage sludge ≥250 mg/kg. Generally, there were no significant differences between ZnO and ZnS NPs toxicity towards F. candida. Aging for 45 days of sewage sludge-amended soil containing NPs affected ZnO and ZnS NPs toxicity to all tested organisms. In the most cases, the toxicity decreased after 45 days of aging for plant (L. sativum) and invertebrates (F. candida). The toxicity of porewater to V. fischeri from sewage sludge-amended soil contains ZnO NPs did not change, while in the case of ZnS NPs, the toxicity increased after 45 days of aging.

Massive coastal tourism influx to the Mediterranean Sea: The environmental risk of sunscreens

The Mediterranean region is, by far, the leading tourism destination in the world, receiving more than 330 million tourists in 2016. This tourism is undertaken mostly for seaside holidays, and during the summer season concentrates between 46% and 69% of the total international arrivals; this is equivalent to a density of 2.9 tourists per meter of Mediterranean coast, or double this number taking into account the local/permanent population in addition. Previous studies have reported not only the presence of sunscreen in the various environmental compartments (water, sediments and biota) of the Mediterranean Sea (MS) and other regions, but also show that sunscreen products are toxic for marine biota and are accumulated and biomagnificated. Here, we highlight that the environmental risk of these chemicals is likely to be exacerbated in the MS due to the massive influx of tourists and its densely populated coasts, the basin's limited exchanges with the ocean, the high residence time of surface waters, and its oligotrophic waters.

The impact of morphology and size of zinc oxide nanoparticles on its toxicity to the freshwater microalga, Raphidocelis subcapitata

Microalgae are key test organisms to assess the effects of chemicals on aquatic ecosystems. Zinc oxide nanoparticles (ZnO NPs) as a widely used metal oxide is considered a potential threat to these primary producers at the base of the food chain. This study investigates the toxicity of ZnO NPs, bulk ZnO, and Zn²⁺ to the representative of freshwater microalgae, Raphidocelis subcapitata. To examine the effect of shape and size of nanoparticles, two types of spherical ZnO NPs with different sizes (20 and 40 nm) and two types of rod-shaped ZnO NPs with different lengths (100 and 500 nm) were synthesized. Microalgal cells were exposed to eight concentrations of each ZnO NP type from 0.01 to 0.7 mg/L for 96 h. The results showed that 0.7 mg/L of ZnO NP could completely inhibit algal growth. Size did not interfere with toxicity in spherical ZnO NPs, but the toxicity decreased by increasing the size of rod-shaped ZnO NPs. Spherical ZnO NPs acted more destructive to microalgal cells than nanorod shape. The addition of 0.7 mg/L of ZnO nanorods to samples caused 30% cell death, while 50% cell death was observed by adding the same concentration of nanospherical ZnO. Nano ZnO revealed to be more toxic than bulk ZnO and Zn²⁺. The Zn²⁺ released from dissolution of ZnO NPs was one of the sources of toxicity, but the ZnO nanostructures were also an important factor in the toxicity.

Characterization of additional zinc ions on the growth, biochemical composition and photosynthetic performance from Spirulina platensis

In this study, the effect of various initial Zn²⁺ concentration additionally on microalgae growth and biochemical composition were investigated. The Spirulina platensis biomass of each concentration reached the maximum at the end of the cultivation. However, high levels could severely inhibit the growth of microalgae. Fluorescence activity occurred changes in response to heavy metal stress. Moreover, biochemical composition in Spirulina platensis altered under zinc stress, and the highest contents of phycocyanin (PC), Chlorophyll-a (Chl-a), Carotenoid and zinc accumulation were obtained. The proportion of saturated and polyunsaturated fatty acids increased constantly in response to Zn²⁺ exposure. Overall, this study indicated that the use of Spirulina platensis is a viable method for treating zinc containing wastewater and harvested microalgae can be processed into high-zinc products.

Environmental risks of ZnO nanoparticle exposure on Microcystis aeruginosa: Toxic effects and environmental feedback

The vast majority of studies measure the toxic effect of organisms exposed to nanoparticles (NPs) while there is still a lack of knowledge about the influence of NPs on the aquatic environment. It is unknown whether or not the interaction between NPs and algae will result in the variation of algal organic matter (AOM) and stimulate the production of more algal toxins. In this study, zinc oxide nanoparticles (nano-ZnO) as a typical representative of metal oxide NPs were used to evaluate the toxic effects and environmental feedback of Microcystis aeruginosa. Reactive oxygen species (ROS) and malondialdehyde (MDA) were measured to explain the toxicity mechanism. Changes of AOM, including the production of toxins, the molecular weight distribution and the excitation-emission matrices of algal solution were also studied as environmental feedback indicators after nano-ZnO destroyed the algae. As the nano-ZnO exceeded the comparable critical concentration (1.0 mg/L), the algae were destroyed and intracellular organic matters were released into the aquatic environment, which stimulated the generation of microcystin-LR (MC-LR). However, it is worth noting that the concentration of nano-ZnO would need to be high (at mg/L range) to stimulate more MC-LR production. These findings are expected to be beneficial in interpreting the toxicity and risks of the releasing of NPs through the feedback between algae and the aquatic environment.

The potential phototoxicity of nano-scale ZnO induced by visible light on freshwater ecosystems

With the development of nanotechnology, nanomaterials have been widely applied in anti-bacterial coating, electronic device, and personal care products. NanoZnO is one of the most used materials and its ecotoxicity has been extensively studied. To explore the potential phototoxicity of nanoZnO induced by visible light, we conducted a long-term experiment on litter decomposition of Typha angustifolia leaves with assessment of fungal multifaceted natures. After 158 d exposure, the decomposition rate of leaf litter was decreased by nanoZnO but no additional effect by visible light. However, visible light enhanced the inhibitory effect of nanoZnO on fungal sporulation rate due to light-induced dissolution of nanoZnO. On the contrary, enzymes such as β-glucosidase, cellobiohydrolase, and leucine-aminopeptidase were significantly increased by the interaction of nanoZnO and visible light, which led to high efficiency of leaf carbon decomposition. Furthermore, different treatments and exposure time separated fungal community associated with litter decomposition. Therefore, the study provided the evidence of the contribution of visible light to nanoparticle phototoxicity at the ecosystem level.

Combined toxicities of copper nanoparticles with carbon nanotubes on marine microalgae Skeletonema costatum

To investigate the combined toxicities of copper nanoparticles (nano-Cu) with carbon nanotubes (CNTs) on marine microalgae Skeletonema costatum, algal growth inhibition tests were carried out. Toxicities of nano-Cu with CNTs and without CNTs on microalgae were determined, respectively. Chlorophyll content and photosynthetic efficiency (ΦPSII) were determined to compare negative effects of nano-Cu with CNTs and without CNTs on photosynthesis. The concentration of Cu²⁺ released by nano-Cu into the medium was determined, and interactions between nano-Cu and CNTs were analyzed to study toxic mechanisms of combined toxicities of nano-Cu with CNTs. It was found that both nano-Cu and CNTs could inhibit the growth of the microalgae; however, the toxicity of CNTs on the microalgae was far lower than that of nano-Cu. The maximum growth inhibition ratio (IR) of nano-Cu on the microalgae was 86% appearing at 96 h under 1.0 mg/L nano-Cu treatment, while the maximum IR of CNTs on the microalgae was 58% at 96 h under 200 mg/L CNT treatment. CNTs could reduce the toxicity of nano-Cu on the microalgae in processes of growth and photosynthesis. Adsorption of Cu²⁺ on CNTs and aggregate between Cu and CNTs in the medium were main reasons for attenuation of toxicity of nano-Cu with adding CNTs.

Toxicity of Co nanoparticles on three species of marine microalgae

Cobalt nanoparticles (CoNPs) are being used in wide range of applications and may enter aquatic environments where they pose a potential threat to aquatic organisms. Algal growth inhibition tests were conducted to explore the potential toxicity of CoNPs on marine microalgae, Platymonas subcordiforus, Chaetoceros curvisetus and Skeletonema costatum. This is one of the first time to explore toxicity of CoNPs on marine algae systematically. The results showed that CoNPs induced toxicity on the three algae. The CoNP toxicity on three species microalgae was partly attributed to the Co²⁺ released by CoNPs in the f/2 seawater medium. The particle size distribution of CoNPs in seawater revealed that CoNPs were agglomerated in the seawater. The shading effect of CoNPs and scanning electron microscope (SEM) images also showed the aggregating of CoNPs and microalgae, which influenced the photosynthetic utilization and inhibited the growth of the three algae. The order of toxic sensitivity of CoNPs on the three algae was as follows: Platymonas subcordiforus < Chaetoceros curvisetus < Skeletonema costatum.

Toxic effects of different types of zinc oxide nanoparticles on algae, plants, invertebrates, vertebrates and microorganisms

Concerns about the potential environmental risks of zinc oxide nanoparticles (ZnO NPs) are becoming an important issue because of their rapid growth in different fields. ZnO NPs are inevitably released in the environment during the production, transport, use and disposal process. Therefore, it is necessary to understand their toxicities and mode of actions. This review summarizes the toxic effects of ZnO NPs with different properties and exposed conditions on different species. The mechanisms of ZnO NPs on living organisms could be mainly attributed to one or more of the following aspects: the physical damage of direct contact, the dissolved zinc ions and the ROS-mediated mechanism. This paper systematically reviews the toxic effects of ZnO NPs on organisms and puts forward the existing problems, which are helpful for the safe and efficient use of ZnO NPs, providing the basis for further study of the toxic effects of ZnO NPs and establishing a comprehensive and safe evaluation system.

Long-term toxicity of ZnO nanoparticles to Scenedesmus rubescens cultivated in different media

The aim of this work was to investigate the long-term toxic effect of zinc oxide (ZnO) nanoparticles (NPs) on freshwater microalgae, combined with the nutrient consumption in the culture. For this purpose, two common microalgae media (Blue-Green 11, BG-11, and Bold’s Basal Medium, BBM) were used. Scenedesmus rubescens was used as freshwater microalgae model species and was exposed to ZnO NPs at different concentrations (0.081 to 810 mg/L) for a period up to 28 d. The experimental results revealed that microalgae growth was affected by the time of exposure and the NPs concentrations, but mainly the culture medium used. Differences in microalgae growth rates were observed and attributed to the selected culture medium. The toxic effect of ZnO NPs was higher on microalgae cultured in modified BG-11 compared to BBM, despite the fact that S. rubescens exhibited higher growth rate in modified BG-11 without the exposure of ZnO NPs.

Nano-QSAR models for predicting cytotoxicity of metal oxide nanoparticles (MONPs) to E. coli

Nanotechnology has been applied to many aspects of human life. Meanwhile, concerns regarding the toxicity of engineered nanomaterials to the environment have also been growing. Herein, an economic and convenient approach based on quantitative structure–activity relationship for nanomaterials (nano-QSAR) was proposed to evaluate the cytotoxicity of metal oxide nanoparticles (MONPs) to E. coli. Six molecular descriptors of 17 MONPs were selected and calculated using Gaussian98 software and DFT-B3LYP method on the LANL2DZ basis set. Two multivariable models, linear and nonlinear, were built based on the calculated molecular descriptors using multiple linear regression (MLR) and support vector machine (SVM) methods, respectively. Results demonstrated that both models presented high reliability, good predictive performance, and fine generalization ability, with all R2 values greater than 0.84. It was also revealed that the lowest unoccupied molecular orbital (LUMO) and molar heat capacity (Cp) were the two key descriptors influencing the cytotoxicity of MONPs.

Toxic effects of microplastic on marine microalgae Skeletonema costatum: Interactions between microplastic and algae

To investigate toxic effects of microplastic on marine microalgae Skeletonema costatum, both algal growth inhibition test and non-contact shading test were carried out, and algal photosynthesis parameters were also determined. The SEM images were used to observe interactions between microplastic and algae. It was found that microplastic (mPVC, average diameter 1 μm) had obvious inhibition on growth of microalgae and the maximum growth inhibition ratio (IR) reached up to 39.7% after 96 h exposure. However, plastic debris (bPVC, average diameter 1 mm) had no effects on growth of microalgae. High concentration (50 mg/L) mPVC also had negative effects on algal photosynthesis since both chlorophyll content and photosynthetic efficiency (ΦPSⅡ) decreased under mPVC treatments. Shading effect was not one reason for toxicity of microplastic on algae in this study. Compared with non-contact shading effect, interactions between microplastic and microalage such as adsorption and aggregation were more reasonable explanations for toxic effects of microplastic on marine microalgae. The SEM images provided a more direct and reasonable method to observe the behaviors of microplastic.