Effects of molecular weight of hyaluronic acid on its viscosity and enzymatic activities of lysozyme and peroxidase

Extraction and Purification of Biopolymers from Marine Origin Sources Envisaging Their Use for Biotechnological Applications

Biopolymers are a versatile and diverse class of materials that has won high interest due to their potential application in several sectors of the economy, such as cosmetics, medical materials/devices, and food additives. In the last years, the search for these compounds has explored a wider range of marine organisms that have proven to be a great alternative to mammal sources for these applications and benefit from their biological properties, such as low antigenicity, biocompatibility, and biodegradability, among others. Furthermore, to ensure the sustainable exploitation of natural marine resources and address the challenges of 3R's policies, there is a current necessity to valorize the residues and by-products obtained from food processing to benefit both economic and environmental interests. Many extraction methodologies have received significant attention for the obtention of diverse polysaccharides, proteins, and glycosaminoglycans to accomplish the increasing demands for these products. The present review gives emphasis to the ones that can be obtained from marine biological resources, as agar/agarose, alginate and sulfated polysaccharides from seaweeds, chitin/chitosan from crustaceans from crustaceans, collagen, and some glycosaminoglycans such as chondroitin sulfate and hyaluronic acids from fish. It is offered, in a summarized and easy-to-interpret arrangement, the most well-established extraction and purification methodologies used for obtaining the referred marine biopolymers, their chemical structure, as well as the characterization tools that are required to validate the extracted material and respective features. As supplementary material, a practical guide with the step-by-step isolation protocol, together with the various materials, reagents, and equipment, needed for each extraction is also delivered is also delivered. Finally, some remarks are made on the needs still observed, despite all the past efforts, to improve the current extraction and purification procedures to achieve more efficient and green methodologies with higher yields, less time-consuming, and decreased batch-to-batch variability.

Effects of Zinc Compounds on the Enzymatic Activities of Lysozyme and Peroxidase and Their Antifungal Activities

This study aimed to investigate the effects of zinc compounds on the enzymatic activities of lysozyme, peroxidase, and the glucose oxidase-mediated peroxidase (GO-PO) system and their antifungal activities. Four different zinc compounds (zinc chloride, gluconate, lactate, and sulfate) were incubated with hen egg-white lysozyme (HEWL), bovine lactoperoxidase (bLPO), the GO-PO system, and human unstimulated whole saliva in solution and on a hydroxyapatite surface. Enzymatic activities of lysozyme, peroxidase, and the GO-PO system were measured through the hydrolysis of Micrococcus lysodeikticus, oxidation of fluorogenic 2',7'-dichlorofluorescin, and glucose assay, respectively. Interactions between zinc and enzymes were analyzed by surface plasmon resonance (SPR). The minimum inhibitory concentration (MIC) and candidacidal activities of zinc compounds were examined against three Candida albicans strains. Zinc gluconate and sulfate significantly increased the enzymatic activities of salivary lysozyme in the solution assay and of HEWL and salivary lysozyme on the hydroxyapatite surface. However, all examined zinc compounds significantly decreased the enzymatic activities of bLPO and salivary peroxidase in solution and on the surface. SPR analyses revealed binding of zinc to lysozyme and peroxidase, with affinity differing according to the zinc compounds. The MIC of zinc compounds against C. albicans was 1.0-2.4 mM. Candidacidal activities were 17.7-38.8% and 23.7-47.0% at 1.0 and 10 mM concentrations, respectively. In conclusion, zinc compounds enhanced lysozyme activity but inhibited peroxidase activity. Zinc compounds exhibited concentration-dependent candidacidal activity against C. albicans. Zinc compounds are potential therapeutic agents for oral health, especially for geriatric patients.

Hyaluronan size and concentration: Effect on key biophysical and biochemical features

The effect of hyaluronan (HA) molecular weight (MW) and concentration (c) on key features of HA-formulations was systematically studied, in vitro, exploring the widest range/number of MW/c to date. Nine pharmaceutical-grade HA-samples (60-2500 kDa) were hydrodynamically characterized using Size-Exclusion-Chromatography-Triple-Detector-Array (SEC-TDA) also providing conformational data. HAs aqueous solutions (thirteen concentrations in the range 0.1-32 g/L) were tested for dynamic viscosity (η). η dependence on MW/c was analyzed providing mathematical correlations not only for the specific-zero-shear-viscosity, but also for the critical-shear-rate and the shear-thinning-extent. Besides confirming the dilute- and semi-dilute- c-regimes for the HAs, a third concentrated regime was evidenced for the 220-2500 kDa samples. Data on how MW affects the dependence of viscosity parameters on c and vice-versa were provided. The 60-90 kDa HAs proved stable to thermal sterilization and enzymatically catalyzed hydrolysis, while the 220-2500 kDa samples depolymerized to an extent depending, beyond concentration, on MW. HA size did not significantly affect fibroblasts behavior: under the conditions here tested, the HAs similarly sustained human-dermal-fibroblasts growth and wound-healing also showing comparable effect on collagen-I, elastin and hyaluronan-synthase-1 expression. Overall, results valuably contribute to the understanding of the HA MW/c impact on the rheological, stability and biochemical features of the final formulations also providing mathematical correlations allowing for their optimization towards specific performance.

In Vitro Effects of Zinc Compounds on the Candidacidal Activities of Salivary Antimicrobials

OBJECTIVE

This study aimed to investigate the effects of zinc compounds on the candidacidal activities of lysozyme and the peroxidase (PO) and glucose oxidase-mediated peroxidase (GO-PO) systems against Candida albicans.

METHODS

Four zinc compounds were used: zinc chloride, gluconate, lactate, and sulphate. Three antimicrobial systems were used: hen egg-white lysozyme (HEWL), the PO system [bovine lactoperoxidase (bLPO), potassium thiocyanate, and hydrogen peroxide], and the GO-PO system (bLPO, potassium thiocyanate, glucose oxidase, and glucose). Three Candida albicans strains were used: ATCC 10231, 11006, and 18804. The candidacidal activity of each zinc compound-antimicrobial system mixture was compared with that of the zinc compound or antimicrobial system alone.

RESULTS

The addition of zinc chloride and gluconate significantly (P < .05) increased the candidacidal activity of HEWL in the ATCC 10231 and 11006 strains. Regarding the PO system, the addition of zinc sulphate in the ATCC 10231 strain and of zinc chloride or gluconate in the ATCC 18804 strain significantly (P < .05) increased the candidacidal activity compared with the PO system alone. No significant changes were observed in the candidacidal activities of the mixture of each zinc compound and the GO-PO system compared with the GO-PO system alone for all three C. albicans strains.

CONCLUSIONS

Although it depended on the type of zinc compound or strain, the addition of zinc compounds increased the candidacidal activities of antimicrobial enzymes against C. albicans compared with HEWL or the PO system alone. The introduction of zinc compounds into oral healthcare products containing antimicrobials could provide additional antifungal activity.

Effects of preservatives on the activities of salivary enzymes

OBJECTIVES

To investigate the effects of common preservatives used in oral health care products on the enzymatic activities of lysozyme, peroxidase, and α-amylase in-solution and on-hydroxyapatite surface phases.

DESIGN

The preservatives used in this study were sodium benzoate, methylparaben, propylparaben, and benzalkonium chloride. Hen egg-white lysozyme, bovine lactoperoxidase, and α-amylase from Bacillus sp. served as sources of purified enzymes. Human unstimulated whole saliva was used as a source of salivary enzymes. Hydroxyapatite beads were used as the surface phase. The preservatives were incubated with purified enzymes or saliva samples in-solution or on-hydroxyapatite surface phases, respectively. Enzymatic activities of lysozyme, peroxidase, and α-amylase were measured by hydrolysis of fluorescein-labelled Micrococcus lysodeikticus, oxidation of fluorogenic 2',7'-dichlorofluorescin, and hydrolysis of fluorogenic starch, respectively.

RESULTS

The effects of the preservatives on the enzymatic activities of lysozyme and peroxidase were more distinct in the saliva samples than purified substances, and in the in-solution phase than on-hydroxyapatite surface phase, and the opposite was true for α-amylase. The most significant result was apparent decrease in peroxidase activities caused by the parabens in the in-solution phase (P<0.05). Sodium benzoate and parabens inhibited lysozyme activity in the in-solution phase, but differently for the purified and salivary lysozymes. Parabens and benzalkonium chloride inhibited the enzymatic activity of α-amylase from Bacillus sp., not saliva samples, only on-hydroxyapatite surface (P<0.05).

CONCLUSIONS

Each preservative affected the enzymatic activities of lysozyme, peroxidase, and α-amylase differently. Based on the effects on salivary enzymes, sodium benzoate or benzalkonium chloride was recommended as preservatives rather than parabens.

Improved and Highly Reproducible Synthesis of Methacrylated Hyaluronic Acid with Tailored Degrees of Substitution

Methacrylated hyaluronic acid (HAMA) is a versatile material that has gained significant attention in various pharmaceutical and biomedical applications. This biocompatible material can be photo-cross-linked in the presence of Irgacure 2959 (I2959) to produce hydrogels. Controlling the degree of methacrylation (DM) is crucial since it plays a pivotal role in determining the properties and thus the potential applications of the gels. We report herein a new green approach for the highly controlled and tailored modification of hyaluronic acid (HA) with methacrylic anhydride (MA). The reaction conditions of previously reported procedures were optimized, leading to a decreased reaction time (3 h instead of 24 h) and consumption of fewer equivalents of MA (5 equiv instead of 20) and water as the sole solvent. By changing the amount of base added, HAMA with three different DMs was obtained: 19, 35, and 60%. The influence of the molecular weight of HA, degree of substitution, and concentration of the HAMA solution prior to photo-cross-linking on the rheological, swelling, and degradation properties of HAMA hydrogels was also studied in this work.

3D Bioprinting of Sugar Beet Pectin through Horseradish Peroxidase-Catalyzed Cross-Linking

Horseradish peroxidase (HRP)-mediated hydrogelation, caused by the cross-linking of phenolic groups in polymers in the presence of hydrogen peroxide (H2O2), is an effective route for bioink solidification in 3D bioprinting. Sugar beet pectin (SBP) naturally has cross-linkable phenols through the enzymatic reaction. Therefore, chemical modifications are not required, unlike the various polymers that have been used in the enzymatic cross-linking system. In this study, we report the application of SBP in extrusion-based bioprinting including HRP-mediated bioink solidification. In this system, H2O2 necessary for the solidification of inks is supplied in the gas phase. Cell-laden liver lobule-like constructs could be fabricated using bioinks consisting of 10 U/mL HRP, 4.0 and 6.0 w/v% SBP, and 6.0 × 106 cells/mL human hepatoblastoma (HepG2) cells exposed to air containing 16 ppm of H2O2 concurrently during printing and 10 min postprinting. The HepG2 cells enclosed in the printed constructs maintained their viability, metabolic activity, and hepatic functions from day 1 to day 7 of the culture, which indicates the cytocompatibility of this system. Taken together, this result demonstrates the potential of SBP and HRP cross-linking systems for 3D bioprinting, which can be applied in tissue engineering applications.

Effects of composition and pH on the degradation of hyaluronate and carboxymethyl cellulose gels and release of nanocrystalline silver

Adhesions are fibrous tissue connections which are a common complication of surgical procedures and may be prevented by protecting tissue surfaces and reducing inflammation. The combination of biodegradable polymers and nanocrystalline silver can be used to create an anti-inflammatory gel to be applied during surgery. In this study, sodium hyaluronate and sodium carboxymethyl cellulose were added in concentrations from 0.25% to 1% w/v to aqueous nanocrystalline silver solutions to create viscous gels. Gels were loaded into dialysis cassettes and placed in PBS for 3 days. pH was adjusted using potassium phosphate monobasic and sodium hydroxide. Release of silver into the PBS was measured at several time points. Polymer degradation was compared by measuring the viscosity of the gels before and after the experiment. Gels lost up to 84% of initial viscosity over 3 days and released between 24% and 41% of the added silver. Gels with higher initial viscosity did not have a greater degree of degradation, as measured by percent viscosity reduction, but still resulted in a higher final viscosity. Silver release was not significantly impacted by pH or composition, but still varied between experimental groups.

Visible light photocrosslinking of sugar beet pectin for 3D bioprinting applications

Herein, we report the hydrogelation of sugar beet pectin (SBP) via visible light-mediated photocrosslinking and its applications in extrusion-based 3D bioprinting. Rapid hydrogelation (<15 s) was achieved by applying 405 nm visible light to an SBP solution in the presence of tris(bipyridine)ruthenium(II) chloride hexahydrate ([Ru(bpy)₃]²⁺) and sodium persulfate (SPS). The mechanical properties of the hydrogel could be tuned by controlling the visible light irradiation time and concentrations of SBP, [Ru(bpy)₃]²⁺, and SPS. High-fidelity 3D hydrogel constructs were fabricated by extruding inks containing 3.0 wt% SBP, 1.0 mM [Ru(bpy)₃]²⁺, and 1.0 mM SPS. Human hepatoblastoma (HepG2) cells encapsulated in SBP hydrogels remained viable and metabolically active after 14 d of culture. Overall, this study demonstrates the feasibility of applying SBP and a visible light-mediated photocrosslinking system to the 3D bioprinting of cell-laden constructs for tissue engineering applications.

Using chitosan-stabilized, hyaluronic acid-modified selenium nanoparticles to deliver CD44-targeted PLK1 siRNAs for treating bladder cancer

Aims: Achieving an effective biocompatible system for siRNAs delivery to the tumor site remains a significant challenge. Materials & methods: Selenium nanoparticles (SeNPs) modified by chitosan (CS) and hyaluronic acid (HA) were fabricated for PLK1 siRNAs (siPLK1) delivery to the bladder cancer cells. The HA-CS-SeNP@siPLK1 efficacy was evaluated using in vitro and in vivo models. Results: HA-CS-SeNP@siPLK1 was selectively internalized into T24 cells through clathrin-mediated endocytosis. Treatment with HA-CS-SeNP@siPLK1 successfully silenced the PLK1 gene, inhibited cell proliferation and induced cell cycle arrest in vitro. HA-CS-SeNP@siPLK1 could also inhibit tumor growth in vivo without causing systemic toxicity. Conclusion: Our results suggest that HA-CS-SeNPs may provide a good vehicle for delivering siPLK1 to the bladder tumor site.

Extraction and characterization of hyaluronic acid from the eyeball of Nile Tilapia (Oreochromis niloticus)

Hyaluronic acid (HA) is a biopolymer of enormous value aggregation for in general industry. The vitreous humor of the eyeball from Nile tilapia contains appreciable amounts of hyaluronic acid. In this sense, the aim of this work was to extract and characterize hyaluronic acid from the eyeball of the Nile tilapia for biomedical applications, adding value to fish industry residues. The characterization by infra-red (FTIR), ¹³C nuclear magnetic resonance (NMR) and high performance liquid chromatography (HPLC) confirmed that hyaluronic acid was obtained. The gel permeation chromatography (GPC) showed that the obtained material presents a low molecular mass (37 KDa). Thermogravimetry (TGA), differential scanning calorimetry (DSC), X-ray diffraction (XRD) analysis showed that the materials present a thermal stability superior to the commercial hyaluronic acid from Streptococcus equi, with a partially crystalline character. The cytotoxicity assay (MTT method) with fibroblast cells (L929) demonstrated that the extracted biopolymer besides not being cytotoxic, was able to stimulate cell proliferation. Therefore, the hyaluronic acid extracted from this source of residue constitutes a product with biotechnological potential, which has adequate quality for wide biomedical applications.

Hyaluronic acid-based nanofibers: Electrospun synthesis and their medical applications; recent developments and future perspective

Hyaluronan is a biodegradable, biopolymer that represents a major part of the extracellular matrix and has the potential to be fabricated in a fibrous form conjugated with other polymers via electrospinning. Unique physicochemical features such as viscoelasticity, conductivity, and biological activity mainly affected by molecular weight attracted the attention of biomedical researchers to utilize hyaluronan for designing novel HA-based nano-devices. Particularly HA-based nanofibers get focused on a diverse range of applications in medical like tissue implants for regeneration of damaged tissue or organ repair, wound dressings, and drug delivery carriers to treat various disorders. Currently, electrospinning represents an effective available method for designing highly porous, 3D, HA-based nanofibers with features similar to that of the extra-cellular matrix making them a promising candidate for designing advanced regenerative medicines. This review highlights the structural and physicochemical features of HA, recently cited protocols in literature for HA production via microbial fermentation with particular focus on electrospun fabrication of HA-based nanofibers and parameters affecting its synthesis, current progress in medical applications of these electrospun HA-based nanofibers, their limitations and future perspective about the potential of these HA-based nanofibers in medical field.

Engineered nasal dry powder for the encapsulation of bioactive compounds

In this review, we present the potential of nasal dry powders to deliver stable bioactive compounds and their manufacture using spray-drying (SD) techniques to achieve encapsulation. We also review currently approved and experimental excipients used for powder manufacturing for specific target drugs. Polymers, sugars, and amino acids are recommended for specific actions, such as mucoadhesive interactions, to increase residence time on the nasal mucosa; for example, high-molecular weight polymers, such as hydroxypropyl methylcellulose, or mannitol, which protect the bioactive compounds, increase their stability, and enhance drug absorption in the nasal mucosa; and leucine, which promotes particle formation and improves aerosol performance. Teaser: XXXX.

Minoxidil-loaded hyaluronic acid dissolving microneedles to alleviate hair loss in an alopecia animal model

Alopecia is defined as hair loss in a part of the head due to various causes, such as drugs, stress and autoimmune disorders. Various therapeutic agents have been suggested depending on the cause of the condition and patient sex, and age. Minoxidil (MXD) is commonly used topically to treat alopecia, but its low absorption rate limits widespread use. To overcome the low absorption, we suggest microneedles (MNs) as controlled drug delivery systems that release MXD. We used hyaluronic acid (HA) to construct MN, as it is biocompatible and safe. We examined the effect of HA on the hair dermal papilla (HDP) cells that control the development of hair follicles. HA enhanced proliferation, migration, and aggregation of HDP cell by increasing cell-cell adhesion and decreasing cell substratum. These effects were mediated by the cluster of differentiation (CD)-44 and phosphorylation of serine‑threonine kinase (Akt). In chemotherapy-induced alopecia mice, topical application of HA tended to decrease chemotherapy-induced hair loss. Although the amount of MXD administered by HA-MNs was 10% of topical treatment, the MXD-containing HA-MNs (MXD-HA-MNs) showed better effects on the growth of hair than topical application of MXD. In summary, our results demonstrated that HA reduces hair loss in alopecia mice, and that delivery of MXD and HA using MXD-HA-MNs maximizes therapeutic effects and minimize the side effects of MXD for the treatment of alopecia. STATEMENT OF SIGNIFICANCE: (1) Significance, This work reports a new approach for treatment of alopecia using a dissolving microneedle (MN) prepared with hyaluronic acid (HA). The HA provided a better environment for cellular functions in the hair dermal papilla cells. The HA-MNs containing minoxidil (MXD) exhibited a significant reduction of hair loss, although amount of MXD contained in them was only 10% of topically applied MXD., (2) Scientific impact, This is the first report demonstrating the direct anti-alopecia effects of HA administrated in a transdermal route and the feasibility of novel therapeutics using MXD-containing HA-MNs. We believe that our work will excite interdisciplinary readers of Acta Biomaterialia, those who are interested in the natural polymers, drug delivery, and alopecia.

General Characteristics, Biomedical and Dental Application, and Usage of Chitosan in the Treatment of Temporomandibular Joint Disorders: A Narrative Review

The aim of this narrative review was to present research investigating chitosan, including its general characteristics, properties, and medical and dental applications, and finally to present the current state of knowledge regarding the efficacy of chitosan in the treatment of temporomandibular disorders (TMDs) based on the literature. The PICO approach was used for the literature search strategy. The PubMed database was analyzed with the following keywords: (“chitosan”[MeSH Terms] OR “chitosan”[All Fields] OR “chitosans”[All Fields] OR “chitosan s”[All Fields] OR “chitosane”[All Fields]) AND (“temporomandibular joint”[MeSH Terms] OR (“tem-poromandibular”[All Fields] AND “joint”[All Fields]) OR “temporomandibular joint”[All Fields] OR (“temporomandibular”[All Fields] AND “joints”[All Fields]) OR “temporo-mandibular joints”[All Fields]). After screening 8 results, 5 studies were included in this review. Chitosan presents many biological properties and therefore it can be widely used in several branches of medicine and dentistry. Chitosan promotes wound healing, helps to control bleeding, and is used in wound dressings, such as sutures and artificial skin. Apart from its antibacterial property, chitosan has many other properties, such as antifungal, mucoadhesive, anti-inflammatory, analgesic, antioxidant, antihyperglycemic, and antitumoral properties. Further clinical studies assessing the efficacy of chitosan in the treatment of TMD are required. According to only one clinical study, chitosan was effective in the treatment of TMD; however, better clinical results were obtained with platelet-rich plasma.

Hyaluronic Acid-Dexamethasone Nanoparticles for Local Adjunct Therapy of Lung Inflammation

The delivery of a dexamethasone formulation directly into the lung appears as an appropriate strategy to strengthen the systemic administration, reducing the dosage in the treatment of lung severe inflammations. For this purpose, a hyaluronic acid-dexamethasone formulation was developed, affording an inhalable reconstituted nanosuspension suitable to be aerosolized. The physico-chemical and biopharmaceutical properties of the formulation were tested: size, stability, loading of the spray-dried dry powder, reconstitution capability upon redispersion in aqueous media. Detailed structural insights on nanoparticles after reconstitution were obtained by light and X-ray scattering techniques. (1) The size of the nanoparticles, around 200 nm, is in the proper range for a possible engulfment by macrophages. (2) Their structure is of the core-shell type, hosting dexamethasone nanocrystals inside and carrying hyaluronic acid chains on the surface. This specific structure allows for nanosuspension stability and provides nanoparticles with muco-inert properties. (3) The nanosuspension can be efficiently aerosolized, allowing for a high drug fraction potentially reaching the deep lung. Thus, this formulation represents a promising tool for the lung administration via nebulization directly in the pipe of ventilators, to be used as such or as adjunct therapy for severe lung inflammation.

Hyaluronic acid-coated chitosan nanoparticles as carrier for the enzyme/prodrug complex based on horseradish peroxidase/indole-3-acetic acid: Characterization and potential therapeutic for bladder cancer cells

Hybrid nanoparticles composed of different biopolymers for delivery of enzyme/prodrug systems are of interest for cancer therapy. Hyaluronic acid-coated chitosan nanoparticles (CS/HA NP) were prepared to encapsulate individually an enzyme/pro-drug complex based on horseradish peroxidase (HRP) and indole-3-acetic acid (IAA). CS/HA NP showed size around 158 nm and increase to 170 and 200 nm after IAA and HRP encapsulation, respectively. Nanoparticles showed positive zeta potential values (between +20.36 mV and +24.40 mV) and higher encapsulation efficiencies for both nanoparticles (up to 90 %) were obtained. Electron microscopy indicated the formation of spherical particles with smooth surface characteristic. Physicochemical and thermal characterizations suggest the encapsulation of HRP and IAA. Kinetic parameters for encapsulated HRP were similar to those of the free enzyme. IAA-CS/HA NP showed a bimodal release profile of IAA with a high initial release (72 %) followed by a slow-release pattern. The combination of HRP-CS/HA NP and IAA- CS/HA NP reduced by 88 % the cell viability of human bladder carcinoma cell line (T24) in the concentrations 0.5 mM of pro-drug and 1.2 μg/mL of the enzyme after 24 h.

Squeeze-film properties of synovial fluid and hyaluronate-based viscosupplements

The rheological properties of synovial fluid and hyaluronate (HA) solutions have been studied using a variety of viscometers and rheometers. These devices measure the viscosity of the fluid's resistance to shearing forces, which is useful when studying the lubrication and frictional properties of movable joints. Less commonly used is a squeeze-film fluid test, mechanistically similar to when two joint surfaces squeeze interposed fluid. In our study, we used squeeze-film tests to determine the rheological response of normal bovine synovial fluid and 10 mg/ml HA-based solutions, Hyalgan/Hyalovet, commercially available 500-700 kDa HA viscosupplements, and a 1000 kDa sodium hyaluronate (NaHy) solution. We found similar rheological responses (fluid thickness, viscosity, viscosity-pressure relationship) for all three fluids, though synovial fluid's minimum squeeze-film thickness was slightly thicker. Squeeze-film loading speed did not affect these results. Different HA concentrations and molecular weights also did not have a significant or consistent effect on the squeeze-film responses. An unexpected result for the HA-solutions was a linear increase in minimum fluid-film thickness with increasing initial fluid-film thickness. This result was attributed to faster gelling of thicker HA-solutions, which formed at a lower squeeze-film strain and higher squeeze-film strain rate compared to thinner layers. Also included is a review of the literature on viscosity measurements of synovial fluid and HA solutions.

Antibacterial effects of saliva substitutes containing lysozyme or lactoferrin against Streptococcus mutans

OBJECTIVE

To determine the antibacterial effects of different saliva-substitutes-containing-lysozyme(LYZ) or-lactoferrin(LF) on Streptococcus mutans(S. mutans) in comparison with human saliva.

DESIGN

In vitro wound-healing assay was performed with L929 mouse fibroblast cell line by using various concentrations of LYZ and LF to determine optimum concentrations and to confirm do not show any cytotoxicity of proteins according to cell culture studies. Antibacterial effect was assessed by determining Minimum Inhibitory Concentrations for all groups on S.mutans. Bacterial adhesion of S. mutans for 4 h on hydroxyapatite(HAP) discs after application of different saliva substitutes was evaluated. The formulations were:saliva-substitute(Group SS);saliva-substitute-containing-Lactoferrin(Group SSLF);saliva-substitute-containing-Lysozyme(Group SSLYZ). Human saliva was control group(Group HS).

RESULTS

In vitro wound healing assay results showed that, when added into the cell culture media, LYZ and LF significantly increase 48 -h scratch wound closure compared to the cell culture media(p < 0.0001). At the end of second day, samples treated with both between 2.5-100 μg/mL LF and 5-200 μg/mL LYZ were found to have significant wound healing effect(p < 001). It was observed that saliva-substitutes-containing-LYZ or-LF had antibacterial effects on S.mutans. Bacterial adhesion on HAP discs was observed significantly higher in control group than in study groups. The amount of adhered S. mutans was significantly higher in Group SS than other study groups(p < 0.0001). However, no statistically significant difference was found between the number of bacteria adhered to HAP discs between SSLYZ and SSLF groups(p > 0.05).

CONCLUSIONS

The study of cell viability and wound healing was great significance in the optimum concentrations of LYZ and LF. Among formulations, saliva-substitutes-containing-LYZ or-LF exhibited higher inhibitory effect on S.mutans.

Influence of Materials Properties on Bio-Physical Features and Effectiveness of 3D-Scaffolds for Periodontal Regeneration

Periodontal diseases are multifactorial disorders, mainly due to severe infections and inflammation which affect the tissues (i.e., gum and dental bone) that support and surround the teeth. These pathologies are characterized by bleeding gums, pain, bad breath and, in more severe forms, can lead to the detachment of gum from teeth, causing their loss. To date it is estimated that severe periodontal diseases affect around 10% of the population worldwide thus making necessary the development of effective treatments able to both reduce the infections and inflammation in injured sites and improve the regeneration of damaged tissues. In this scenario, the use of 3D scaffolds can play a pivotal role by providing an effective platform for drugs, nanosystems, growth factors, stem cells, etc., improving the effectiveness of therapies and reducing their systemic side effects. The aim of this review is to describe the recent progress in periodontal regeneration, highlighting the influence of materials' properties used to realize three-dimensional (3D)-scaffolds, their bio-physical characteristics and their ability to provide a biocompatible platform able to embed nanosystems.

Hyaluronic Acid: The Influence of Molecular Weight on Structural, Physical, Physico-Chemical, and Degradable Properties of Biopolymer

Hyaluronic acid, as a natural linear polysaccharide, has attracted researchers' attention from its initial detection and isolation from tissues in 1934 until the present day. Due to biocompatibility and a high biodegradation of hyaluronic acid, it finds wide application in bioengineering and biomedicine: from biorevitalizing skin cosmetics and endoprostheses of joint fluid to polymeric scaffolds and wound dressings. However, the main properties of aqueous polysaccharide solutions with different molecular weights are different. Moreover, the therapeutic effect of hyaluronic acid-based preparations directly depends on the molecular weight of the biopolymer. The present review collects the information about relations between the molecular weight of hyaluronic acid and its original properties. Particular emphasis is placed on the structural, physical and physico-chemical properties of hyaluronic acid in water solutions, as well as their degradability.

Viscosities of mixtures of hyaluronic acids with different molecular weights and their effects on enzymatic activities of lysozyme and peroxidase

OBJECTIVES

To investigate the viscosity values of mixtures of hyaluronic acids with different molecular weights and the effects of these mixtures on the enzymatic activities of lysozyme and peroxidase.

MATERIALS AND METHODS

Mixtures of high molecular weight (1 or 2 MDa) and low molecular weight (10 or 100 kDa) hyaluronic acids at different concentrations were used for viscosity measurements. Hyaluronic acid mixtures showing viscosity values similar to those of human whole saliva were used for enzyme experiments in solution and on hydroxyapatite surface. Hen egg-white lysozyme, bovine lactoperoxidase, and human whole saliva were used as enzyme sources. Lysozyme activity was measured by hydrolysis of fluorescein-labeled Micrococcus lysodeikticus. Peroxidase activity was measured by oxidation of fluorogenic 2',7'-dichlorofluorescein to fluorescing 2',7'-dichlorofluorescein.

RESULTS

The mixtures of 1 MDa (0.5 mg/mL) or 2 MDa (0.2 mg/mL) hyaluronic acid with 10 kDa (2.0 mg/mL) or 100 kDa (0.1 mg/mL) hyaluronic acid had viscosity values similar to those of human whole saliva at shear rates, reflecting normal oral functions. Compared with single molecular weight hyaluronic acids, these mixtures showed viscosity values more similar to those of human whole saliva. The mixtures inhibited lysozyme and peroxidase activities on the hydroxyapatite surfaces; however, the degree of inhibition did not differ from that of hyaluronic acid of 1 or 2 MDa only.

CONCLUSIONS

Compared with single molecular weight hyaluronic acids, hyaluronic acid mixtures showed viscosity values more similar to those of human whole saliva, without additional inhibitory effects on lysozyme and peroxidase activities.

CLINICAL RELEVANCE

Hyaluronic acid mixtures offer distinct advantages for the development of saliva substitutes.

Nrf2-mediated cytoprotective effect of four different hyaluronic acids by molecular weight in human tenocytes

Non-traumatic rotator cuff tears (RCTs) are a frequent and potentially disabling injury. There is growing evidence that hyaluronic acid (HA) is effective for pain relief and to counteract inflammation in RCTs, however, its effective role in tendinopathies remains poorly studied. This study aims to disclose a possible molecular mechanism underlying the cytoprotective effects of four different HA preparations (Artrosulfur HA^®, Synolis VA^®, Hyalgan^® and Hyalubrix^®) under H₂O₂-induced oxidative stress. Expression-levels of Lactate dehydrogenase (LDH) released were quantified in cell supernatants, CD44 expression levels were analysed by fluorescence microscopy, the mitochondrial membrane depolarisation (TMRE assay) was measured by flow cytometry and the role of the transcription factor Nrf2 was investigated as a potential therapeutic target for RCT treatment. The modulation of extracellular matrix- (ECM) related protein expression (Integrin β1, pro-collagen 1A2 and collagen 1A1) and autophagy occurrence (Erk 1/2 and phosphoErk 1/2 and LC3B), were all investigated by Western Blot. Results demonstrate that Artrosulfur HA, Hyalubrix and Hyalgan improve cell escape from H₂O₂-induced oxidative stress, decreasing cytotoxicity, reducing Nrf2 expression and enhancing catalase recovery. This study lays the grounds for further investigations insight novel pharmaceutical strategies targeting key effectors involved in the molecular cascade triggered by HA.

Artificial Saliva: Challenges and Future Perspectives for the Treatment of Xerostomia

The chronic sensation of a dry mouth is a disease condition called xerostomia and affects a large part of the population. Xerostomia is associated with decreased secretion, or more often, qualitative changes in saliva proteins and immunoglobulin concentrations that develop as a result of salivary gland dysfunction. Several reasons causing dry mouth were described, and usually, they include taking medications, diseases or radiotherapy. In some situations, when it is difficult to use salivary stimulants or salivary gland damage is irreversible, the only option might seem to be saliva substitutes. The paper presents the most important aspects considering saliva preparations. The rheological and lubricating properties and the reconstruction of the complex saliva structure has been the main purpose of research. The biological properties of saliva preparations were also widely discussed. As part of the work, the antimicrobial effect of three commercial saliva preparations was tested. Finally, inadequate antimicrobial properties against the strains isolated from the oral cavity were demonstrated. The development of salivary substitutes, in particular, the improvement of antimicrobial properties, can be achieved using nanotechnology, including drug delivery systems containing nanocarriers.

Evaluation of physician volumetric accuracy during hyaluronic acid gel injections: An observational, proof-of-concept study

BACKGROUND

Findings indicate that standard injection techniques for hyaluronic acid (HA) soft tissue fillers result in considerable variations in the applied boluses. Furthermore, despite the knowledge that the varying biophysical properties of HA fillers (eg, G', cohesivity, viscoelasticity) can affect their ease of injection, the impact of device attributes on an injector's volumetric accuracy is currently unknown.

OBJECTIVES

(a) Evaluate the ability of aesthetic physicians to accurately inject a specific amount of HA filler; (b) investigate the effect of physician experience on injection accuracy; and (c) investigate the impact of different HA gel properties on an injector's performance.

METHODS

Thirteen physicians with aesthetic experience were recruited. Subjects were blindfolded and asked to deposit 0.2 cc of four HA fillers under two conditions: (a) onto a scale and (b) into a porcine membrane. The amount of gel deposited/injected was then measured. An accurate injection was defined as 0.2 cc ± 15%.

RESULTS

Subjects were rarely able to dispense accurate amounts of injectate (42/208 injections or 20.19%) and often underestimated their injection quantities. Variations in the accuracy distributions between groups were observed. An injector's experience, the conditions under which injections were performed and the product choice were all variables found to affect the accuracy distributions.

CONCLUSIONS

The findings of this study provide evidence that the use of visual and/or audible stimuli is necessary for dispensing accurate volumes. This has clinical implications for treatment efficacy and patient satisfaction during free hand injections. To ensure more accurate and reproducible results, the investigators propose a possible modification to the standard injection technique.