Molecular assembly and mechanical properties of the extracellular matrix: A fibrous protein perspective

Mammary tissue-derived extracellular matrix hydrogels reveal the role of irradiation in driving a pro-tumor and immunosuppressive microenvironment

Radiation therapy (RT) is essential for triple negative breast cancer (TNBC) treatment. However, patients with TNBC continue to experience recurrence after RT. The role of the extracellular matrix (ECM) of irradiated breast tissue in tumor recurrence is still unknown. In this study, we evaluated the structure, molecular composition, and mechanical properties of irradiated murine mammary fat pads (MFPs) and developed ECM hydrogels from decellularized tissues (dECM) to assess the effects of RT-induced ECM changes on breast cancer cell behavior. Irradiated MFPs were characterized by increased ECM deposition and fiber density compared to unirradiated controls, which may provide a platform for cell invasion and proliferation. ECM component changes in collagens I, IV, and VI, and fibronectin were observed following irradiation in both MFPs and dECM hydrogels. Encapsulated TNBC cell proliferation and invasive capacity was enhanced in irradiated dECM hydrogels. In addition, TNBC cells co-cultured with macrophages in irradiated dECM hydrogels induced M2 macrophage polarization and exhibited further increases in proliferation. Our study establishes that the ECM in radiation-damaged sites promotes TNBC invasion and proliferation as well as an immunosuppressive microenvironment. This work represents an important step toward elucidating how changes in the ECM after RT contribute to breast cancer recurrence.

Artificial keloid skin models: understanding the pathophysiological mechanisms and application in therapeutic studies

Keloid is a type of scar formed by the overexpression of extracellular matrix substances from fibroblasts following inflammation after trauma. The existing keloid treatment methods include drug injection, surgical intervention, light exposure, cryotherapy, etc. However, these methods have limitations such as recurrence, low treatment efficacy, and side effects. Consequently, studies are being conducted on the treatment of keloids from the perspective of inflammatory mechanisms. In this study, keloid models are created to understand inflammatory mechanisms and explore treatment methods to address them. While previous studies have used animal models with gene mutations, chemical treatments, and keloid tissue transplantation, there are limitations in fully reproducing the characteristics of keloids unique to humans, and ethical issues related to animal welfare pose additional challenges. Consequently, studies are underway to create in vitro artificial skin models to simulate keloid disease and apply them to the development of treatments for skin diseases. In particular, herein, scaffold technologies that implement three-dimensional (3D) full-thickness keloid models are introduced to enhance mechanical properties as well as biological properties of tissues, such as cell proliferation, differentiation, and cellular interactions. It is anticipated that applying these technologies to the production of artificial skin for keloid simulation could contribute to the development of inflammatory keloid treatment techniques in the future.

Role of umbilical cord mesenchymal stromal cells in skin rejuvenation

Aging is the main cause of many degenerative diseases. The skin is the largest and the most intuitive organ that reflects the aging of the body. Under the interaction of endogenous and exogenous factors, there are cumulative changes in the structure, function, and appearance of the skin, which are characterized by decreased synthesis of collagen and elastin, increased wrinkles, relaxation, pigmentation, and other aging characteristics. skin aging is inevitable, but it can be delayed. The successful isolation of mesenchymal stromal cells (MSC) in 1991 has greatly promoted the progress of cell therapy in human diseases. The International Society for Cellular Therapy (ISCT) points out that the MSC is a kind of pluripotent progenitor cells that have self-renewal ability (limited) in vitro and the potential for mesenchymal cell differentiation. This review mainly introduces the role of perinatal umbilical cord-derived MSC(UC-MSC) in the field of skin rejuvenation. An in-depth and systematic understanding of the mechanism of UC-MSCs against skin aging is of great significance for the early realization of the clinical transformation of UC-MSCs. This paper summarized the characteristics of skin aging and summarized the mechanism of UC-MSCs in skin rejuvenation reported in recent years. In order to provide a reference for further research of UC-MSCs to delay skin aging.

Engineering Cell Instructive Microenvironments for In Vitro Replication of Functional Barrier Organs

Multicellular organisms exhibit synergistic effects among their components, giving rise to emergent properties crucial for their genesis and overall functionality and survival. Morphogenesis involves and relies upon intricate and biunivocal interactions among cells and their environment, that is, the extracellular matrix (ECM). Cells secrete their own ECM, which in turn, regulates their morphogenetic program by controlling time and space presentation of matricellular signals. The ECM, once considered passive, is now recognized as an informative space where both biochemical and biophysical signals are tightly orchestrated. Replicating this sophisticated and highly interconnected informative media in a synthetic scaffold for tissue engineering is unattainable with current technology and this limits the capability to engineer functional human organs in vitro and in vivo. This review explores current limitations to in vitro organ morphogenesis, emphasizing the interplay of gene regulatory networks, mechanical factors, and tissue microenvironment cues. In vitro efforts to replicate biological processes for barrier organs such as the lung and intestine, are examined. The importance of maintaining cells within their native microenvironmental context is highlighted to accurately replicate organ-specific properties. The review underscores the necessity for microphysiological systems that faithfully reproduce cell-native interactions, for advancing the understanding of developmental disorders and disease progression.

Morphometric analysis of the effects of high molecular weight sodium hyaluronate and amino acids mixture on face rejuvenation

BACKGROUND

Skin aging can be observed at various levels in the epidermis, dermis, and dermo-epidermal junction. Reducing the cosmetic effects of skin aging in the facial region is a widespread demand due to common aesthetic concerns. Consequently, many injectable products on the market promise antiaging effects and cosmetic improvements. We aimed to evaluate the cosmetic efficacy of a high molecular weight sodium hyaluronate and amino acids mixture for the facial region using morphometric analysis.

METHODS

This study evaluates the morphometric effectiveness of an injectable mixture (high molecular weight sodium hyaluronate, glycine, L-Proline, L-leucine, L-lysine HCL, L-valine, and L-alanine collagen active ingredient) on the mid-face and jawline in women aged 30-55. We used morphological measurements and digital image data to assess changes and determine effectiveness. Various computational methods were applied simultaneously with statistical tests for validation.

RESULTS

The hydration assessment showed a significant increase on both sides of the face. A noticeable decrease was observed in gonion angle, bitragion breadth, bigonion breadth, and marionette wrinkle scale. These results suggest combining mechanical and chemical stimulation from the injection and its components (hyaluronic and amino acids) effectively enhances skin quality.

CONCLUSIONS

The study indicates that the mechanical stimulation of the injection improves skin quality. Combining hyaluronic and amino acids (collagen, elastin, and pro-synthetic) is a safe and effective alternative for antiaging treatments.

Characterization of the layer, direction and time-dependent mechanical behaviour of the human oesophagus and the effects of formalin preservation

The mechanical characterization of the oesophagus is essential for applications such as medical device design, surgical simulations and tissue engineering, as well as for investigating the organ's pathophysiology. However, the material response of the oesophagus has not been established ex vivo in regard to the more complex aspects of its mechanical behaviour using fresh, human tissue: as of yet, in the literature, only the hyperelastic response of the intact wall has been studied. Therefore, in this study, the layer-dependent, anisotropic, visco-hyperelastic behaviour of the human oesophagus was investigated through various mechanical tests. For this, cyclic tests, with increasing stretch levels, were conducted on the layers of the human oesophagus in the longitudinal and circumferential directions and at two different strain rates. Additionally, stress-relaxation tests on the oesophageal layers were carried out in both directions. Overall, the results show discrete properties in each layer and direction, highlighting the importance of treating the oesophagus as a multi-layered composite material with direction-dependent behaviour. Previously, the authors conducted layer-dependent cyclic experimentation on formalin-embalmed human oesophagi. A comparison between the fresh and embalmed tissue response was carried out and revealed surprising similarities in terms of anisotropy, strain-rate dependency, stress-softening and hysteresis, with the main difference between the two preservation states being the magnitude of these properties. As formalin fixation is known to notably affect the formation of cross-links between the collagen of biological materials, the differences may reveal the influence of cross-links on the mechanical behaviour of soft tissues.

Unexpected softening of a fibrous matrix by contracting inclusions

Cells respond to the stiffness of their surrounding environment, but quantifying the stiffness of a fibrous matrix at the scale of a cell is complicated, due to the effects of nonlinearity and complex force transmission pathways resulting from randomness in fiber density and connections. While it is known that forces produced by individual contractile cells can stiffen the matrix, it remains unclear how simultaneous contraction of multiple cells in a fibrous matrix alters the stiffness at the scale of a cell. Here, we used computational modeling and experiments to quantify the stiffness of a random fibrous matrix embedded with multiple contracting inclusions, which mimicked the contractile forces of a cell. The results showed that when the matrix was free to contract as a result of the forces produced by the inclusions, the matrix softened rather than stiffened, which was surprising given that the contracting inclusions applied tensile forces to the matrix. Using the computational model, we identified that the underlying cause of the softening was that the majority of the fibers were under a local state of axial compression, causing buckling. We verified that this buckling-induced matrix softening was sufficient for cells to sense and respond by altering their morphology and force generation. Our findings reveal that the localized forces induced by cells do not always stiffen the matrix; rather, softening can occur in instances wherein the matrix can contract in response to the cell-generated forces. This study opens up new possibilities to investigate whether cell-induced softening contributes to maintenance of homeostatic conditions or progression of disease. STATEMENT OF SIGNIFICANCE: Mechanical interactions between cells and the surrounding matrix strongly influence cellular functions. Cell-induced forces can alter matrix properties, and much prior literature in this area focused on the influence of individual contracting cells. Cells in tissues are rarely solitary; rather, they are interspersed with neighboring cells throughout the matrix. As a result, the mechanics are complicated, leaving it unclear how the multiple contracting cells affect matrix stiffness. Here, we show that multiple contracting inclusions within a fibrous matrix can cause softening that in turn affects cell sensing and response. Our findings provide new directions to determine impacts of cell-induced softening on maintenance of tissue or progression of disease.

Exploring Extracellular Matrix Crosslinking as a Therapeutic Approach to Fibrosis

The extracellular matrix (ECM) provides structural support for tissues and regulatory signals for resident cells. ECM requires a careful balance between protein accumulation and degradation for homeostasis. Disruption of this balance can lead to pathological processes such as fibrosis in organs across the body. Post-translational crosslinking modifications to ECM proteins such as collagens alter ECM structure and function. Dysregulation of crosslinking enzymes as well as changes in crosslinking composition are prevalent in fibrosis. Because of the crucial roles these ECM crosslinking pathways play in disease, the enzymes that govern crosslinking events are being explored as therapeutic targets for fibrosis. Here, we review in depth the molecular mechanisms underlying ECM crosslinking, how ECM crosslinking contributes to fibrosis, and the therapeutic strategies being explored to target ECM crosslinking in fibrosis to restore normal tissue structure and function.

Designing collagens to shed light on the multi-scale structure-function mapping of matrix disorders

Collagens are the most abundant structural proteins in the extracellular matrix of animals and play crucial roles in maintaining the structural integrity and mechanical properties of tissues and organs while mediating important biological processes. Fibrillar collagens have a unique triple helix structure with a characteristic repeating sequence of (Gly-X-Y)n. Variations within the repetitive sequence can cause misfolding of the triple helix, resulting in heritable connective tissue disorders. The most common variations are single-point missense mutations that lead to the substitution of a glycine residue with a bulkier amino acid (Gly → X). In this review, we will first discuss the importance of collagen's triple helix structure and how single Gly substitutions can impact its folding, structure, secretion, assembly into higher-order structures, and biological functions. We will review the role of "designer collagens," i.e., synthetic collagen-mimetic peptides and recombinant bacterial collagen as model systems to include Gly → X substitutions observed in collagen disorders and investigate their impact on structure and function utilizing in vitro studies. Lastly, we will explore how computational modeling of collagen peptides, especially molecular and steered molecular dynamics, has been instrumental in probing the effects of Gly substitutions on structure, receptor binding, and mechanical stability across multiple length scales.

Intravital Microscopy to Study the Effect of Matrix Metalloproteinase Inhibition on Acute Myeloid Leukemia Cell Migration in the Bone Marrow

Hematopoiesis is the process through which all mature blood cells are formed and takes place in the bone marrow (BM). Acute myeloid leukemia (AML) is a blood cancer of the myeloid lineage. AML progression causes drastic remodeling of the BM microenvironment, making it no longer supportive of healthy hematopoiesis and leading to clinical cytopenia in patients. Understanding the mechanisms by which AML cells shape the BM to their benefit would lead to the development of new therapeutic strategies. While the role of extracellular matrix (ECM) in solid cancer has been extensively studied during decades, its role in the BM and in leukemia progression has only begun to be acknowledged. In this context, intravital microscopy (IVM) gives the unique insight of direct in vivo observation of AML cell behavior in their environment during disease progression and/or upon drug treatments. Here we describe our protocol for visualizing and analyzing MLL-AF9 AML cell dynamics upon systemic inhibition of matrix metalloproteinases (MMP), combining confocal and two-photon microscopy and focusing on cell migration.

Pulmonary fibroelastosis - A review

Elastin is a long-lived fibrous protein that is abundant in the extracellular matrix of the lung. Elastic fibers provide the lung the characteristic elasticity during inhalation with recoil during exhalation thereby ensuring efficient gas exchange. Excessive deposition of elastin and other extracellular matrix proteins reduces lung compliance by impairing ventilation and compromising gas exchange. Notably, the degree of elastosis is associated with the progressive decline in lung function and survival in patients with interstitial lung diseases. Currently there are no proven therapies which effectively reduce the elastin burden in the lung nor prevent dysregulated elastosis. This review describes elastin's role in the healthy lung, summarizes elastosis in pulmonary diseases, and evaluates the current understanding of elastin regulation and dysregulation with the goal of guiding future research efforts to develop novel and effective therapies.

Relaxation and creep response of the alveolar lung to diagnosis and treatments for respiratory and lung disorders

BACKGROUND

The lung Extracellular Matrix (ECM) contains a considerable part of the parenchymal cells. It contains three essential components: elastin and collagen within a proteoglycan (PG) viscoelastic network. Elastin provides the lung's elasticity property, a necessity for normal breathing, while collagen prepares structural support and strength, and PGs give stability and cushioning within tissue loading. Bacterial and viral respiratory diseases are dependent on changes in the ECM ingredients, which result in an alteration of the lung tissue strength.

PURPOSE

In the present study, this variation was investigated by changing the volume ratio of the ECM ingredients in the viscoelastic model.

RESULTS

As a result, the relaxation curves continuously declined by reducing the volume ratios of elastin, collagen, and PGs; subsequently, the lung stiffness decreased. Also, the Standard Linear Solid (SLS) model-based results demonstrated excellent accordance with empirical data with only minor deviations. The resting relaxation modulus and the creep modulus for the ECM tissue were 51 kPa and approximately 0.02 kPa, respectively, and the maximum total modulus of elasticity reached 121 kPa.

CONCLUSIONS

Moreover, this model demonstrates individual alveolar mechanical behaviours and adds another pathway to the generalized Kelvin-Voigt and Maxwell models in predicting the progress of lung diseases.

Piezoelectric and Triboelectric Nanogenerators for Enhanced Wound Healing

Wound healing is a highly orchestrated biological process characterized by sequential phases involving inflammation, proliferation, and tissue remodeling, and the role of endogenous electrical signals in regulating these phases has been highlighted. Recently, external electrostimulation has been shown to enhance these processes by promoting cell migration, extracellular matrix formation, and growth factor release while suppressing pro-inflammatory signals and reducing the risk of infection. Among the innovative approaches, piezoelectric and triboelectric nanogenerators have emerged as the next generation of flexible and wireless electronics designed for energy harvesting and efficiently converting mechanical energy into electrical power. In this review, we discuss recent advances in the emerging field of nanogenerators for harnessing electrical stimulation to accelerate wound healing. We elucidate the fundamental mechanisms of wound healing and relevant bioelectric physiology, as well as the principles underlying each nanogenerator technology, and review their preclinical applications. In addition, we address the prominent challenges and outline the future prospects for this emerging era of electrical wound-healing devices.

Recent Advances in the Development of Biomimetic Materials

In this review, we focused on recent efforts in the design and development of materials with biomimetic properties. Innovative methods promise to emulate cell microenvironments and tissue functions, but many aspects regarding cellular communication, motility, and responsiveness remain to be explained. We photographed the state-of-the-art advancements in biomimetics, and discussed the complexity of a "bottom-up" artificial construction of living systems, with particular highlights on hydrogels, collagen-based composites, surface modifications, and three-dimensional (3D) bioprinting applications. Fast-paced 3D printing and artificial intelligence, nevertheless, collide with reality: How difficult can it be to build reproducible biomimetic materials at a real scale in line with the complexity of living systems? Nowadays, science is in urgent need of bioengineering technologies for the practical use of bioinspired and biomimetics for medicine and clinics.

Effect of Aging on Tendon Biology, Biomechanics and Implications for Treatment Approaches

Tendon aging is associated with an increasing prevalence of tendon injuries and/or chronic tendon diseases, such as tendinopathy, which affects approximately 25% of the adult population. Aged tendons are often characterized by a reduction in the number and functionality of tendon stem/progenitor cells (TSPCs), fragmented or disorganized collagen bundles, and an increased deposition of glycosaminoglycans (GAGs), leading to pain, inflammation, and impaired mobility. Although the exact pathology is unknown, overuse and microtrauma from aging are thought to be major causative factors. Due to the hypovascular and hypocellular nature of the tendon microenvironment, healing of aged tendons and related injuries is difficult using current pain/inflammation and surgical management techniques. Therefore, there is a need for novel therapies, specifically cellular therapy such as cell rejuvenation, due to the decreased regenerative capacity during aging. To augment the therapeutic strategies for treating tendon-aging-associated diseases and injuries, a comprehensive understanding of tendon aging pathology is needed. This review summarizes age-related tendon changes, including cell behaviors, extracellular matrix (ECM) composition, biomechanical properties and healing capacity. Additionally, the impact of conventional treatments (diet, exercise, and surgery) is discussed, and recent advanced strategies (cell rejuvenation) are highlighted to address aged tendon healing. This review underscores the molecular and cellular linkages between aged tendon biomechanical properties and the healing response, and provides an overview of current and novel strategies for treating aged tendons. Understanding the underlying rationale for future basic and translational studies of tendon aging is crucial to the development of advanced therapeutics for tendon regeneration.

Development of tissue culture system with automated pulsation and Kalman filter control for an artificial artery model

Tissue-engineered arterial vessels have been used as substitutes for unnecessary animal experiments to evaluate the pharmacokinetics of drugs targeting various arteriopathies caused by structural or physiological arterial defects. An arterial tissue culture system was established to simulate the mechanical characteristics of a heart-beating pump and to do online feedback control of lactate and glucose concentrations. The mechanically controlled flow pump mimicked the heart pumping inside a tissue-engineered artery composed of muscle and endothelial cells within a nanofibrous scaffold. After monitoring the pH of the culture medium online, lactate and glucose were estimated using the Kalman filter algorithm, and the set-point online control was operated to maintain glucose for artery tissue engineering. The composition of the artificial artery was confirmed by immunofluorescence staining, and its mechanical characteristics were examined. The online automated system successfully demonstrated its applicability as a standardized process for arterial tissue culture to replace animal arterial experiments.

Scanning Laser Ophthalmoscopy Demonstrates Disc and Peripapillary Strain During Horizontal Eye Rotation in Adults

PURPOSE

We used automated image analysis of scanning laser ophthalmoscopy (SLO) to investigate mechanical strains imposed on disc, and retinal and choroidal vessels during horizontal duction in adults.

DESIGN

Deep learning analysis of optical images.

METHODS

The peripapillary region was imaged by SLO in central gaze, and 35° abduction and adduction, in younger and older healthy adults. Automated image registration was followed by deep learning-based optical flow analysis to track determine local tissue deformations quantified as horizontal, vertical, and shear strain maps relative to central gaze. Choroidal vessel displacements were observed when fundus pigment was light.

RESULTS

Strains in the retina and disc could be quantified in 22 younger (mean ± SEM, 26 ± 5 years) and 19 older (64 ± 10 years) healthy volunteers. Strains were predominantly horizontal and greater for adduction than for abduction. During adduction, maximum horizontal strain was tensile in the nasal hemi-disc, and declined progressively with distance from it. Strain in the temporal hemi-retina during adduction was minimal, except for compressive strain on the disc of older subjects. In abduction, horizontal strains were less and largely confined to the disc, greater in older subjects, and generally tensile. Vertical and shear strains were small. Nasal to the disc, choroidal vessels shifted nasally relative to overlying peripapillary retinal vessels.

CONCLUSIONS

Strain analysis during horizontal duction suggests that the optic nerve displaces the optic canal, choroid, and peripapillary sclera relative to the overlying disc and retina. This peripapillary shearing of the optic nerve relative to the choroid and sclera may be a driver of disc tilting and peripapillary atrophy.

Cell-Tissue Interaction: The Biomimetic Approach to Design Tissue Engineered Biomaterials

The advancement achieved in Tissue Engineering is based on a careful and in-depth study of cell-tissue interactions. The choice of a specific biomaterial in Tissue Engineering is fundamental, as it represents an interface for adherent cells in the creation of a microenvironment suitable for cell growth and differentiation. The knowledge of the biochemical and biophysical properties of the extracellular matrix is a useful tool for the optimization of polymeric scaffolds. This review aims to analyse the chemical, physical, and biological parameters on which are possible to act in Tissue Engineering for the optimization of polymeric scaffolds and the most recent progress presented in this field, including the novelty in the modification of the scaffolds' bulk and surface from a chemical and physical point of view to improve cell-biomaterial interaction. Moreover, we underline how understanding the impact of scaffolds on cell fate is of paramount importance for the successful advancement of Tissue Engineering. Finally, we conclude by reporting the future perspectives in this field in continuous development.

Effect of Pressure Conditions in Uterine Decellularization Using Hydrostatic Pressure on Structural Protein Preservation

Uterine regeneration using decellularization scaffolds provides a novel treatment for uterine factor infertility. Decellularized scaffolds require maximal removal of cellular components and minimal damage to the extracellular matrix (ECM). Among many decellularization methods, the hydrostatic pressure (HP) method stands out due to its low cytotoxicity and superior ECM preservation compared to the traditional detergent methods. Conventionally, 980 MPa was utilized in HP decellularization, including the first successful implementation of uterine decellularization previously reported by our team. However, structural protein denaturation caused by exceeding pressure led to a limited regeneration outcome in our previous research. This factor urged the study on the effects of pressure conditions in HP methods on decellularized scaffolds. The authors, therefore, fabricated a decellularized uterine scaffold at varying pressure conditions and evaluated the scaffold qualities from the perspective of cell removal and ECM preservation. The results show that by using lower decellularization pressure conditions of 250 MPa, uterine tissue can be decellularized with more preserved structural protein and mechanical properties, which is considered to be promising for decellularized uterine scaffold fabrication applications.

Strategic outline of interventions targeting extracellular matrix for promoting healthy longevity

The extracellular matrix (ECM), composed of interlinked proteins outside of cells, is an important component of the human body that helps maintain tissue architecture and cellular homeostasis. As people age, the ECM undergoes changes that can lead to age-related morbidity and mortality. Despite its importance, ECM aging remains understudied in the field of geroscience. In this review, we discuss the core concepts of ECM integrity, outline the age-related challenges and subsequent pathologies and diseases, summarize diagnostic methods detecting a faulty ECM, and provide strategies targeting ECM homeostasis. To conceptualize this, we built a technology research tree to hierarchically visualize possible research sequences for studying ECM aging. This strategic framework will hopefully facilitate the development of future research on interventions to restore ECM integrity, which could potentially lead to the development of new drugs or therapeutic interventions promoting health during aging.

Stimuli-responsive hydrogels: smart state of-the-art platforms for cardiac tissue engineering

Biomedicine and tissue regeneration have made significant advancements recently, positively affecting the whole healthcare spectrum. This opened the way for them to develop their applications for revitalizing damaged tissues. Thus, their functionality will be restored. Cardiac tissue engineering (CTE) using curative procedures that combine biomolecules, biomimetic scaffolds, and cells plays a critical part in this path. Stimuli-responsive hydrogels (SRHs) are excellent three-dimensional (3D) biomaterials for tissue engineering (TE) and various biomedical applications. They can mimic the intrinsic tissues' physicochemical, mechanical, and biological characteristics in a variety of ways. They also provide for 3D setup, adequate aqueous conditions, and the mechanical consistency required for cell development. Furthermore, they function as competent delivery platforms for various biomolecules. Many natural and synthetic polymers were used to fabricate these intelligent platforms with innovative enhanced features and specialized capabilities that are appropriate for CTE applications. In the present review, different strategies employed for CTE were outlined. The light was shed on the limitations of the use of conventional hydrogels in CTE. Moreover, diverse types of SRHs, their characteristics, assembly and exploitation for CTE were discussed. To summarize, recent development in the construction of SRHs increases their potential to operate as intelligent, sophisticated systems in the reconstruction of degenerated cardiac tissues.

Cellular uptake of modified mRNA occurs via caveolae-mediated endocytosis, yielding high protein expression in slow-dividing cells

Nucleic acids have clear clinical potential for gene therapy. Plasmid DNA (pDNA) was the first nucleic acid to be pursued as a therapeutic molecule. Recently, mRNA came into play as it offers improved safety and affordability. In this study, we investigated the uptake mechanisms and efficiencies of genetic material by cells. We focused on three main variables (1) the nucleic acid (pDNA, or chemically modified mRNA), (2) the delivery vector (Lipofectamine 3000 or 3DFect), and (3) human primary cells (mesenchymal stem cells, dermal fibroblasts, and osteoblasts). In addition, transfections were studied in a 3D environment using electrospun scaffolds. Cellular internalization and intracellular trafficking were assessed by using enhancers or inhibitors of endocytosis and endosomal escape. The polymeric vector TransIT-X2 was included for comparison purposes. While lipoplexes utilized several entry routes, uptake via caveolae served as the main route for gene delivery. pDNA yielded higher expression levels in fast-dividing fibroblasts, whereas, in slow-dividing osteoblasts, cmRNA was responsible for high protein production. In the case of mesenchymal stem cells, which presented an intermediate doubling time, the combination vector/nucleic acid seemed more relevant than the nucleic acid per se. In all cases, protein expression was higher when the cells were seeded on 3D scaffolds.

Enhanced Vulnerability of Diabetic Mice to Hypervirulent Streptococcus agalactiae ST-17 Infection

Streptococcus agalactiae (Group B Streptococcus, GBS) is the leading cause of neonatal sepsis and meningitis but has been recently isolated from non-pregnant adults with underlying medical conditions like diabetes. Despite diabetes being a key risk factor for invasive disease, the pathological consequences during GBS infection remain poorly characterized. Here, we demonstrate the pathogenicity of the GBS90356-ST17 and COH1-ST17 strains in streptozotocin-induced diabetic mice. We show that GBS can spread through the bloodstream and colonize several tissues, presenting a higher bacterial count in diabetic-infected mice when compared to non-diabetic-infected mice. Histological sections of the lungs showed inflammatory cell infiltration, collapsed septa, and red blood cell extravasation in the diabetic-infected group. A significant increase in collagen deposition and elastic fibers were also observed in the lungs. Moreover, the diabetic group presented red blood cells that adhered to the valve wall and disorganized cardiac muscle fibers. An increased expression of KC protein, IL-1β, genes encoding immune cell markers, and ROS (reactive oxygen species) production was observed in diabetic-infected mice, suggesting GBS promotes high levels of inflammation when compared to non-diabetic animals. Our data indicate that efforts to reverse the epidemic of diabetes could considerably reduce the incidence of invasive infection, morbidity and mortality due to GBS.

Recent advances in decellularized biomaterials for wound healing

The skin is one of the most essential organs in the human body, interacting with the external environment and shielding the body from diseases and excessive water loss. Thus, the loss of the integrity of large portions of the skin due to injury and illness may lead to significant disabilities and even death. Decellularized biomaterials derived from the extracellular matrix of tissues and organs are natural biomaterials with large quantities of bioactive macromolecules and peptides, which possess excellent physical structures and sophisticated biomolecules, and thus, promote wound healing and skin regeneration. Here, we highlighted the applications of decellularized materials in wound repair. First, the wound-healing process was reviewed. Second, we elucidated the mechanisms of several extracellular matrix constitutes in facilitating wound healing. Third, the major categories of decellularized materials in the treatment of cutaneous wounds in numerous preclinical models and over decades of clinical practice were elaborated. Finally, we discussed the current hurdles in the field and anticipated the future challenges and novel avenues for research on decellularized biomaterials-based wound treatment.

Mechanical Properties and Functions of Elastin: An Overview

Human tissues must be elastic, much like other materials that work under continuous loads without losing functionality. The elasticity of tissues is provided by elastin, a unique protein of the extracellular matrix (ECM) of mammals. Its function is to endow soft tissues with low stiffness, high and fully reversible extensibility, and efficient elastic-energy storage. Depending on the mechanical functions, the amount and distribution of elastin-rich elastic fibers vary between and within tissues and organs. The article presents a concise overview of the mechanical properties of elastin and its role in the elasticity of soft tissues. Both the occurrence of elastin and the relationship between its spatial arrangement and mechanical functions in a given tissue or organ are overviewed. As elastin in tissues occurs only in the form of elastic fibers, the current state of knowledge about their mechanical characteristics, as well as certain aspects of degradation of these fibers and their mechanical performance, is presented. The overview also outlines the latest understanding of the molecular basis of unique physical characteristics of elastin and, in particular, the origin of the driving force of elastic recoil after stretching.

The acetabular labrum tissue shows unique transcriptome signatures compared to cartilage and responds to combined cyclic compression and surface shearing

The labrum is a fibrocartilaginous ring surrounding the acetabulum. Loss of labrum function contributes to the degeneration of the hip joint, leading to osteoarthritis. Successful labrum restoration requires profound knowledge about the tissue being replaced. The aim of this study was to characterize the transcriptome and the mechanobiological function of the labrum. RNA-seq was performed to compare the transcriptome of bovine labrum against articular cartilage tissue. Differential expression and gene ontology (GO) term pathway analysis were applied using the SUSHI framework. Bovine labrum explants were cultured for 5 days with / without mechanical loading and targeted gene expression was analyzed by real time quantitative polymerase chain reaction. More than 6'000 genes were significantly differentially expressed in the labrum compared to cartilage. Up- and downregulated genes were associated with the GO term extracellular matrix organization. The study established an extracellular matrix gene expression profile of healthy labrum tissue and identified significantly upregulated extracellular matrix related genes compared to cartilage tissue. Mechanical loading significantly upregulated aggrecan (ACAN), cartilage oligomeric matrix protein (COMP), fibronectin (FN1) and proteoglycan 4 (PRG4). MMP1/3/9 and IL6, which were upregulated by an inflammatory stimulus (IL-1b), were statistically unaffected by the loading, although IL6 was upregulated in each donor immediately after the loading. Unique ECM related features may guide the development of labrum tissue-engineering solutions. Despite the transcriptome differences between labrum and cartilage tissue, gene expression response to mechanical loading showed similarities with previously reported responses in cartilage, indicating a preserved tissue adaptation mechanism to mechanical loading. Running title: Acetabular Labrum Mechanobiology.

Protein-Based Biological Materials: Molecular Design and Artificial Production

Polymeric materials produced from fossil fuels have been intimately linked to the development of industrial activities in the 20th century and, consequently, to the transformation of our way of living. While this has brought many benefits, the fabrication and disposal of these materials is bringing enormous sustainable challenges. Thus, materials that are produced in a more sustainable fashion and whose degradation products are harmless to the environment are urgently needed. Natural biopolymers─which can compete with and sometimes surpass the performance of synthetic polymers─provide a great source of inspiration. They are made of natural chemicals, under benign environmental conditions, and their degradation products are harmless. Before these materials can be synthetically replicated, it is essential to elucidate their chemical design and biofabrication. For protein-based materials, this means obtaining the complete sequences of the proteinaceous building blocks, a task that historically took decades of research. Thus, we start this review with a historical perspective on early efforts to obtain the primary sequences of load-bearing proteins, followed by the latest developments in sequencing and proteomic technologies that have greatly accelerated sequencing of extracellular proteins. Next, four main classes of protein materials are presented, namely fibrous materials, bioelastomers exhibiting high reversible deformability, hard bulk materials, and biological adhesives. In each class, we focus on the design at the primary and secondary structure levels and discuss their interplays with the mechanical response. We finally discuss earlier and the latest research to artificially produce protein-based materials using biotechnology and synthetic biology, including current developments by start-up companies to scale-up the production of proteinaceous materials in an economically viable manner.

Skin drug delivery using lipid vesicles: A starting guideline for their development

Lipid vesicles can provide a cost-effective enhancement of skin drug absorption when vesicle production process is optimised. It is an important challenge to design the ideal vesicle, since their properties and features are related, as changes in one affect the others. Here, we review the main components, preparation and characterization methods commonly used, and the key properties that lead to highly efficient vesicles for transdermal drug delivery purposes. We stand by size, deformability degree and drug loading, as the most important vesicle features that determine the further transdermal drug absorption. The interest in this technology is increasing, as demonstrated by the exponential growth of publications on the topic. Although long-term preservation and scalability issues have limited the commercialization of lipid vesicle products, freeze-drying and modern escalation methods overcome these difficulties, thus predicting a higher use of these technologies in the market and clinical practice.

Static and Dynamic: Evolving Biomaterial Mechanical Properties to Control Cellular Mechanotransduction

The extracellular matrix (ECM) is a highly dynamic system that constantly offers physical, biological, and chemical signals to embraced cells. Increasing evidence suggests that mechanical signals derived from the dynamic cellular microenvironment are essential controllers of cell behaviors. Conventional cell culture biomaterials, with static mechanical properties such as chemistry, topography, and stiffness, have offered a fundamental understanding of various vital biochemical and biophysical processes, such as cell adhesion, spreading, migration, growth, and differentiation. At present, novel biomaterials that can spatiotemporally impart biophysical cues to manipulate cell fate are emerging. The dynamic properties and adaptive traits of new materials endow them with the ability to adapt to cell requirements and enhance cell functions. In this review, an introductory overview of the key players essential to mechanobiology is provided. A biophysical perspective on the state-of-the-art manipulation techniques and novel materials in designing static and dynamic ECM-mimicking biomaterials is taken. In particular, different static and dynamic mechanical cues in regulating cellular mechanosensing and functions are compared. This review to benefit the development of engineering biomechanical systems regulating cell functions is expected.

Advances in polymer-based cell encapsulation and its applications in tissue repair

Cell microencapsulation is a more widely accepted area of biological encapsulation. In most cases, it involves fixing cells in polymer scaffolds or semi-permeable hydrogel capsules, providing the environment for protecting cells, allowing the exchange of nutrients and oxygen, and protecting cells against the attack of the host immune system by preventing the entry of antibodies and cytotoxic immune cells. Hydrogel encapsulation provides a three-dimensional (3D) environment similar to that experienced in vivo, so it can maintain normal cellular functions to produce tissues similar to those in vivo. Embedded cells can be genetically modified to release specific therapeutic products directly at the target site, thereby eliminating the side effects of systemic treatments. Cellular microcarriers need to meet many extremely high standards regarding their biocompatibility, cytocompatibility, immunoseparation capacity, transport, mechanical, and chemical properties. In this article, we discuss the biopolymer gels used in tissue engineering applications and the brief introduction of cell encapsulation for therapeutic protein production. Also, we review polymer biomaterials and methods for preparing cell microcarriers for biomedical applications. At the same time, in order to improve the application performance of cell microcarriers in vivo, we also summarize the main limitations and improvement strategies of cell encapsulation. Finally, the main applications of polymer cell microcarriers in regenerative medicine are summarized.

Understanding Atherosclerosis Pathophysiology: Can Additive Manufacturing Be Helpful?

Atherosclerosis is one of the leading causes of death worldwide. Although this subject arouses much interest, there are limitations associated with the biomechanical investigation done in atherosclerotic tissues, namely the unstandardized tests for the mechanical characterization of these tissues and the inherent non-consensual results obtained. The variability of tests and typologies of samples hampers direct comparisons between results and hinders the complete understanding of the pathologic process involved in atherosclerosis development and progression. Therefore, a consensual and definitive evaluation of the mechanical properties of healthy and atherosclerotic blood vessels would allow the production of physical biomodels that could be used for surgeons' training and personalized surgical planning. Additive manufacturing (AM), commonly known as 3D printing, has attracted significant attention due to the potential to fabricate biomodels rapidly. However, the existing literature regarding 3D-printed atherosclerotic vascular models is still very limited. Consequently, this review intends to present the atherosclerosis disease and the consequences of this pathology, discuss the mechanical characterization of atherosclerotic vessels/plaques, and introduce AM as a potential strategy to increase the understanding of atherosclerosis treatment and pathophysiology.

Modulation of the biophysical and biochemical properties of collagen by glycation for tissue engineering applications

The structural and functional properties of collagen are modulated by the presence of intramolecular and intermolecular crosslinks. Advanced Glycation End-products (AGEs) can produce intermolecular crosslinks by bonding the free amino groups of neighbouring proteins. In this research, the following hypothesis is explored: The accumulation of AGEs in collagen decreases its proteolytic degradation rates while increasing its stiffness. Fluorescence Lifetime Imaging (FLIM) and Fourier-transform infrared spectroscopy (FTIR) detect biochemical changes in collagen scaffolds during the glycation process. The accumulation of AGEs increases exponentially in the collagen scaffolds as a function of Methylglyoxal (MGO) concentration by performing autofluorescence measurement and competitive ELISA. Glycated scaffolds absorb water at a much higher rate confirming the direct affinity between AGEs and interstitial water within collagen fibrils. In addition, the topology of collagen fibrils as observed by Atomic Force Microscopy (AFM) is a lot more defined following glycation. The elastic modulus of collagen fibrils decreases as a function of glycation, whereas the elastic modulus of collagen scaffolds increases. Finally, the enzymatic degradation of collagen by bacterial collagenase shows a sigmoidal pattern with a much slower degradation rate in the glycated scaffolds. This study identifies unique variations in the properties of collagen following the accumulation of AGEs. STATEMENT OF SIGNIFICANCE: In humans, Advanced Glycation End-products (AGEs) are naturally produced as a result of aging process. There is an evident lack of knowledge in the basic science literature explaining the biomechanical impact of AGE-mediated crosslinks on the functional and structural properties of collagen at both the nanoscale (single fibrils) and mesoscale (bundles of fibrils). This research, demonstrates how it is possible to harness this natural phenomenon in vitro to enhance the properties of engineered collagen fibrils and scaffolds. This study identifies unique variations in the properties of collagen at nanoscale and mesoscale following accumulation of AGEs. In their approach, they investigate the unique properties conferred to collagen, namely enhanced water sorption, differential elastic modulus, and finally sigmoidal proteolytic degradation behavior.

A novel composite smeared finite element for mechanics (CSFEM): Some applications

BACKGROUND

Mechanical forces at the micro-scale level have been recognized as an important factor determining various biological functions. The study of cell or tissue mechanics is critical to understand problems in physiology and disease development.

OBJECTIVE

The complexity of computational models and efforts made for their development in the past required significant robustness and different approaches in the modeling process.

METHOD

For the purpose of modeling process simplifications, the smeared mechanics concept was introduced by M. Kojic as a general concept for modeling the deformation of composite continua. A composite smeared finite element for mechanics (CSFEM) was formulated which consists of the supporting medium and immersed subdomains of deformable continua with mutual interactions. Interaction is modeled using 1D contact elements (for both tangential and normal directions), where the interaction takes into account appropriate material parameters as well as the contact areas.

RESULTS

In this paper we have presented verification examples with applications of the CSFEMs that include the pancreatic tumor tissue, nano-indentation model and tumor growth model.

CONCLUSION

We have described CSFEM and contact elements between compartments that can interact. Accuracy and applicability are determined on two verification and tumor growth examples.

Complete proteomic profiling of regenerative bio-scaffolds with a two-step trypsinization method

Regenerative bio-scaffolds, widely used for clinical tissue reconstruction and tissue repairs, are functionally diversified and structurally complex decellularized tissue materials (e.g., extracellular matrix, ECM). ECM is naturally cross-linked and can be further selectively cross-linked upon processing. Identification, quantification and bioinformatics functional comparison of all ECM proteins are challenging for regenerative bio-scaffolds. In this study, we have applied proteomic profiling with a two-step sequential trypsinization method, and identified and quantified 300-400 constituent proteins in three commercially available regenerative bio-scaffolds (BioDesign Surgisis, ReGen tissue matrix, and ThormalGEN mesh). These proteins were classified into four categories and 14 subcategories based on their mainly biological function. The main components of regenerative bio-scaffolds were highly abundant ECM structural proteins, and the minor parts of bio-scaffolds were lowly abundant, less cross-linked, functionally more diversified proteins, especially extracellular fluid proteins that were easily solubilized by trypsin. The comparative analysis has revealed large differences in the number, type, abundance and function of identified proteins, as well as the extent of decellularization and cross-linking among regenerative bio-scaffolds. So, the proteomic profiling with a two-step sequential trypsinization method could not only provide the molecular basis to better understand the degradation process of regenerative bio-scaffolds in vivo and different clinical outcomes among various regenerative bio-scaffolds, facilitate the exploration of the response mechanisms in the host's early clinical stages of ECM-induced tissue regeneration that is still poorly understood, but also can be used for optimization of the decellularization and cross-linking process, product characterization and rational design of new ECM products.

Collagen-Specific Molecular Magnetic Resonance Imaging of Prostate Cancer

Constant interactions between tumor cells and the extracellular matrix (ECM) influence the progression of prostate cancer (PCa). One of the key components of the ECM are collagen fibers, since they are responsible for the tissue stiffness, growth, adhesion, proliferation, migration, invasion/metastasis, cell signaling, and immune recruitment of tumor cells. To explore this molecular marker in the content of PCa, we investigated two different tumor volumes (500 mm3 and 1000 mm3) of a xenograft mouse model of PCa with molecular magnetic resonance imaging (MRI) using a collagen-specific probe. For in vivo MRI evaluation, T1-weighted sequences before and after probe administration were analyzed. No significant signal difference between the two tumor volumes could be found. However, we detected a significant difference between the signal intensity of the peripheral tumor area and the central area of the tumor, at both 500 mm3 (p < 0.01, n = 16) and at 1000 mm3 (p < 0.01, n = 16). The results of our histologic analyses confirmed the in vivo studies: There was no significant difference in the amount of collagen between the two tumor volumes (p > 0.05), but within the tumor, higher collagen expression was observed in the peripheral area compared with the central area of the tumor. Laser ablation with inductively coupled plasma mass spectrometry further confirmed these results. The 1000 mm3 tumors contained 2.8 ± 1.0% collagen and the 500 mm3 tumors contained 3.2 ± 1.2% (n = 16). There was a strong correlation between the in vivo MRI data and the ex vivo histological data (y = −0.068x + 1.1; R2 = 0.74) (n = 16). The results of elemental analysis by inductively coupled plasma mass spectrometry supported the MRI data (y = 3.82x + 0.56; R2 = 0.79; n = 7). MRI with the collagen-specific probe in PCa enables differentiation between different tumor areas. This may help to differentiate tumor from healthy tissue, potentially identifying tumor areas with a specific tumor biology.

3D Porous Collagen Matrices-A Reservoir for In Vitro Simultaneous Release of Tannic Acid and Chlorhexidine

The treatment of wounds occurring accidentally or as a result of chronic diseases most frequently requires the use of appropriate dressings, mainly to ensure tissue regeneration/healing, at the same time as treating or preventing potential bacterial infections or superinfections. Collagen type I-based scaffolds in tandem with adequate antimicrobials can successfully fulfill these requirements. In this work, starting from the corresponding hydrogels, we prepared a series of freeze-dried atelocollagen type I-based matrices loaded with tannic acid (TA) and chlorhexidine digluconate (CHDG) as active agents with a broad spectrum of antimicrobial activity and also as crosslinkers for the collagen network. The primary aim of this study was to design an original and reliable algorithm to in vitro monitor and kinetically analyze the simultaneous release of TA and CHDG from the porous matrices into an aqueous solution of phosphate-buffered saline (PBS, pH 7.4, 37 °C) containing micellar carriers of a cationic surfactant (hexadecyltrimethylammonium bromide, HTAB) as a release environment that roughly mimics human extracellular fluids in living tissues. Around this central idea, a comprehensive investigation of the lyophilized matrices (morpho-structural characterization through FT-IR spectroscopy, scanning electron microscopy, swelling behavior, resistance against the collagenolytic action of collagenase type I) was carried out. The kinetic treatment of the release data displayed a preponderance of non-Fickian-Case II diffusion behavior, which led to a general anomalous transport mechanism for both TA and CHDG, irrespective of their concentrations. This is equivalent to saying that the release regime is not governed only by the gradient concentration of the releasing components inside and outside the matrix (like in ideal Fickian diffusion), but also, to a large extent, by the relaxation phenomena of the collagen network (determined, in turn, by its crosslinking degree induced by TA and CHDG) and the dynamic capacity of the HTAB micelles to solubilize the two antimicrobials. By controlling the degree of physical crosslinking of collagen with a proper content of TA and CHDG loaded in the matrix, a tunable, sustainable release profile can be obtained.

Super-soft, firm, and strong elastomers toward replication of tissue viscoelastic response

Polymeric networks are commonly used for various biomedical applications, from reconstructive surgery to wearable electronics. Some materials may be soft, firm, strong, or damping however, implementing all four properties into a single material to replicate the mechanical properties of tissue has been inaccessible. Herein, we present the A-g-B brush-like graft copolymer platform as a framework for fabrication of materials with independently tunable softness and firmness, capable of reaching a strength of ∼10 MPa on par with stress-supporting tissues such as blood vessel, muscle, and skin. These properties are maintained by architectural control, therefore diverse mechanical phenotypes are attainable for a variety of different chemistries. Utilizing this attribute, we demonstrate the capability of the A-g-B platform to enhance specific characteristics such as tackiness, damping, and moldability.

The conjunctival transcriptome in Ethiopians after trichiasis surgery: associations with the development of eyelid contour abnormalities and the effect of oral doxycycline treatment

Background: Surgery to correct trichiasis is a key component of the World Health Organisation trachoma control strategy, however unfavourable outcomes such as eyelid contour abnormalities (ECA) following surgery are relatively common. This study aimed to understand the transcriptional changes associated with the early development of ECA and the impact of doxycycline, which has anti-inflammatory and anti-fibrotic properties, upon these transcription patterns. Methods: One thousand Ethiopians undergoing trichiasis surgery were enrolled in a randomised controlled trial following informed consent. Equal groups of randomly assigned individuals were orally administered with 100mg/day of doxycycline (n=499) or placebo (n=501) for 28 days. Conjunctival swabs were collected immediately prior to surgery and at one- and six-months post-surgery. 3' mRNA sequencing was performed on paired baseline and one-month samples from 48 individuals; 12 in each treatment/outcome group (Placebo-Good outcome, Placebo-Poor outcome, Doxycycline-Good outcome, Doxycycline-Poor outcome). qPCR validation was then performed for 46 genes of interest in 145 individuals who developed ECA at one month and 145 matched controls, using samples from baseline, one and six months. Results: All treatment/outcome groups upregulated genes associated with wound healing pathways at one month relative to baseline, however no individual differences were detected between groups. The summed expression of a highly coexpressed cluster of pro-fibrotic genes was higher in patients that developed ECA in the placebo group relative to controls. qPCR validation revealed that all genes in this cluster and a number of other pro-inflammatory genes were strongly associated with ECA, however these associations were not modulated by trial arm. Conclusions: The development of post-operative ECA is associated with overexpression of pro-inflammatory and pro-fibrotic genes including growth factors, matrix metalloproteinases, collagens and extracellular matrix proteins. There was no evidence that doxycycline modulated the association between gene expression and ECA.

In Silico Analysis of Collagens Missense SNPs and Human Abnormalities

Collagens are the most abundant proteins in the extra cellular matrix/ECM of human tissues that are encoded by different genes. There are single nucleotide polymorphisms/SNPs which are considered as the most useful biomarkers for some disease diagnosis or prognosis. The aim of this study is screening and identifying the functional missense SNPs of human ECM-collagens and investigating their correlation with human abnormalities. All of the missense SNPs were retrieved from the NCBI SNP database and screened for a global frequency of more than 0.1. Seventy missense SNPs that met the screening criteria were characterized for functional and stability impact using six and three protein analysis tools, respectively. Next, HOPE and geneMANIA analysis tools were used to show the effect of SNPs on three-dimensional structure (3D) and physical interaction of proteins. Results showed that 13 missense SNPs (rs2070739, rs28381984, rs13424243, rs1800517, rs73868680, rs12488457, rs1353613, rs59021909, rs9830253, rs2228547, rs3753841, rs2855430, and rs970547), which are in nine different collagen genes, affect the structure and function of different collagen proteins. Among these polymorphisms, COL4A3-rs13424243 and COL6A6-rs59021909 were predicted as the most effective ones. On the other hand, designed mutated and native 3D of rs13424243 variant illustrated that it can disturb the protein motifs. Also, geneMANIA predicted that COL4A3 and COL6A6 are interacting with some proteins including: DDR1, COL6A1, COL11A2 and so on. Based on our findings, ECM-collagens functional SNPs are important and may be considered as a risk factor or molecular marker for human disorders in the future studies.

Polyisocyanides as a substrate to trigger vaginal fibroblast functioning in an in vitro model for prolapse repair

Pelvic organ prolapse (POP) is the descent of the bladder, uterus, and/or rectum into the vagina. POP is associated with altered vaginal fibroblast functionality and connective tissue composition in the vaginal wall. The results of surgical intervention are poor, which may be related to the lack of true restoration of the connective tissue. An innovative treatment addresses tissue repair after surgery by the introduction of a bioactive supplement that enhances the healing process through collagen and elastin deposition. As a novel strategy, we first studied the effects in an in vitro model. Here, we investigate how the presence of cell binding GRGDS (RGD) peptides on the highly biomimetic polyisocyanide (PIC) gel facilitates and promotes the function of primary vaginal fibroblasts isolated from a POP patient. Fibroblast function was analyzed in terms of morphology, proliferation, and extracellular matrix (ECM) deposition and remodeling. RGD modification of the gel facilitated cell spread and proliferation. Quantitative outcomes of the ECM content indicated increased production of collagen and elastin by fibroblasts on gels with the highest RGD density. The in vitro results suggest that PIC-RGD hydrogel application may translate into improved connective tissue healing in the pelvic floor, which is essential for its use as a regeneration promoting additive in surgery.

Lead nitrate toxicity: its effects on hepatic extracellular matrix fibers, filamentous cytoskeleton and the mitigative potentials of Morinda lucida extract

•

Lead nitrate accumulation cause severe deleterious effect on the cellular and cytoskeletal structure of the liver.

•

Efficacy of Morinda lucida, a medicinal plant, in the mitigation of lead nitrate-induced cellular, cytoskeletal and extracellular alterations in the liver was investigated in Wistar rats.

•

Morinda lucida significantly reversed lead-nitrate-induced hepatocellular, cytoskeletal and extracellular changes in Wistar rats.

•

Possible ameliorative property of Morinda lucida could be due to the antioxidant and membrane stabilizing properties of its phenolic compounds.

In this study, the effect of orally administered methanolic extract of Morinda lucida stem bark (MLSB) was tested for its efficacy to reverse lead nitrate-induced hepatotoxicity in Wistar rats. Thirty-six female rats were assigned into six groups (n = 6). Rats in group I received 2.2 mL/kg distilled water for 28 days, those in group II received 30 mg/kg lead nitrate for 14 days while those in groups III to VI received 30 mg/kg lead nitrate for 14 days followed by a treatment with 100, 250, 500 mg/kg BW MLSB extract and 0.2 mL/100 kg rats silymarin respectively for 14 days. They were sacrificed after 28 days after which biochemical, histological, and immunohistochemical parameters were examined. The results of this study showed a reduction of catalase and superoxide dismutase activities by lead nitrate. Deranged hepatic histomorphology was also observed intracellularly and extracellularly in lead nitrate-treated rats. Altered vimentin arrangement was also observed in lead nitrate-treated rats. However, 250 mg/kg BW dose of Morinda lucida significantly reversed some of these changes while the 500 mg had some toxic effect on liver tissue. We concluded that the extract at 250mg/kg BW dose may be a potential treatment for conditions associated with lead toxicity and other metallic particles.

A rethinking of collagen as tough biomaterials in meat packaging: assembly from native to synthetic

Due to the high moisture-associated typical rheology and the changeable and harsh processing conditions in the production process, packaging materials for meat products have higher requirements including a sufficient mechanical strength and proper ductility. Collagen, a highly conserved structural protein consisting of a triple helix of Gly-X-Y repeats, has been proved to be suitable packaging material for meat products. The treated animal digestive tract (i.e. the casing) is the perfect natural packaging material for wrapping meat into sausage. Its thin walls, strong toughness and impact resistance make it the oldest and best edible meat packaging. Collagen casing is another wisdom of meat packaging, which is made by collagen fibers from hide skin, presenting a rapid growth in casing market. To strengthen mechanical strength and barrier behaviors of collagen-based packaging materials, different physical, chemical, and biological cross-linking methods are springing up exuberantly, as well as a variety of reinforcement approaches including nanotechnology. In addition, the rapid development of biomimetic technology also provides a good research idea and means for the promotion of collagen's assembly and relevant mechanical properties. This review can offer some reference on fundamental theory and practical application of collagenous materials in meat products.

Biomimetic Hydrogels in the Study of Cancer Mechanobiology: Overview, Biomedical Applications, and Future Perspectives

Hydrogels are biocompatible polymers that are tunable to the system under study, allowing them to be widely used in medicine, bioprinting, tissue engineering, and biomechanics. Hydrogels are used to mimic the three-dimensional microenvironment of tissues, which is essential to understanding cell–cell interactions and intracellular signaling pathways (e.g., proliferation, apoptosis, growth, and survival). Emerging evidence suggests that the malignant properties of cancer cells depend on mechanical cues that arise from changes in their microenvironment. These mechanobiological cues include stiffness, shear stress, and pressure, and have an impact on cancer proliferation and invasion. The hydrogels can be tuned to simulate these mechanobiological tissue properties. Although interest in and research on the biomedical applications of hydrogels has increased in the past 25 years, there is still much to learn about the development of biomimetic hydrogels and their potential applications in biomedical and clinical settings. This review highlights the application of hydrogels in developing pre-clinical cancer models and their potential for translation to human disease with a focus on reviewing the utility of such models in studying glioblastoma progression.

Simple Preparation of Injectable Hydrogels with Phase-Separated Structures That Can Encapsulate Live Cells

Injectable hydrogels are biomaterials that can be administered minimally invasively in liquid form and are considered promising artificial extracellular matrix (ECM) materials. However, ordinary injectable hydrogels are synthesized from water-soluble molecules to ensure injectability, resulting in non-phase-separated structures, making them structurally different from natural ECMs with phase-separated insoluble structural proteins, such as collagen and elastin. Here, we propose a simple material design approach to impart phase-separated structures to injectable hydrogels by adding inorganic salts. Injecting a gelling solution of mutually cross-linkable tetra-arm poly(ethylene glycol)s with potassium sulfate at optimal concentrations results in the formation of a hydrogel with phase-separated structures in situ. These phase-separated structures provide up to an 8-fold increase in fracture toughness while allowing the encapsulation of live mouse chondrogenic cells without compromising their proliferative activity. Our findings highlight that the concentration of inorganic salts is an important design parameter in injectable hydrogels for artificial ECMs.

Matrix stiffness and architecture drive fibro-adipogenic progenitors' activation into myofibroblasts

Fibro-adipogenic progenitors (FAPs) are essential in supporting regeneration in skeletal muscle, but in muscle pathologies FAPs the are main source of excess extracellular matrix (ECM) resulting in fibrosis. Fibrotic ECM has altered mechanical and architectural properties, but the feedback onto FAPs of stiffness or ECM properties is largely unknown. In this study, FAPs’ sensitivity to their ECM substrate was assessed using collagen coated polyacrylamide to control substrate stiffness and collagen hydrogels to engineer concentration, crosslinking, fibril size, and alignment. FAPs on substrates of fibrotic stiffnesses had increased myofibroblast activation, depicted by αSMA expression, compared to substrates mimicking healthy muscle, which correlated strongly YAP nuclear localization. Surprisingly, fibrosis associated collagen crosslinking and larger fibril size inhibited myofibroblast activation, which was independent of YAP localization. Additionally, collagen crosslinking and larger fibril diameters were associated with decreased remodeling of the collagenous substrate as measured by second harmonic generation imaging. Inhibition of YAP activity through verteporfin reduced myofibroblast activation on stiff substrates but not substrates with altered architecture. This study is the first to demonstrate that fibrotic muscle stiffness can elicit FAP activation to myofibroblasts through YAP signaling. However, fibrotic collagen architecture actually inhibits myofibroblast activation through a YAP independent mechanism. These data expand knowledge of FAPs sensitivity to ECM and illuminate targets to block FAP’s from driving progression of muscle fibrosis.

Distinctive structure, composition and biomechanics of collagen fibrils in vaginal wall connective tissues associated with pelvic organ prolapse

Collagen is the predominant structural protein within connective tissues. Pelvic organ prolapse (POP) is characterized by weakening of the pelvic floor connective tissues and loss of support for pelvic organs. In this study, we examined the multiscale structure, molecular composition and biomechanics of native collagen fibrils in connective tissues of the posterior vaginal fornix collected from healthy women and POP patients, and established the correlation of these properties with clinical POP quantification (POP-Q) scores. The collagen characteristics, including collagen amount, ratio of Collagen I and Collagen III, collagen fibril d-period, alignment and stiffness, were found to change progressively with the increase of the clinical measurement of Point C, a measure of uterine descent and apical prolapse. The results imply that a severe prolapse is associated with stiffer collagen fibrils, reduced collagen d-period, increased fibril alignment and imbalanced collagen synthesis, degradation and deposition. Additionally, prolapse progression appears to be synchronized with deterioration of the collagen matrix, suggesting that a POP-Q score obtained via a non-invasive clinical test can be potentially used to quantitatively assess collagen abnormality of a patient's local tissue. STATEMENT OF SIGNIFICANCE: Abnormal collagen metabolism and deposition are known to associate with connective tissue disorders, such as pelvic organ prolapse. Quantitative correlation of the biochemical and biophysical characteristics of collagen in a prolapse patient's tissue with the clinical diagnostic measurements is unexplored and unestablished. This study fills the knowledge gap between clinical prolapse quantification and the individual's cellular and molecular disorders leading to connective tissue failure, thus, provides the basis for clinicians to employ personalized treatment that can best manage the patient's condition and to alert pre-symptomatic patients for early management to avoid unwanted surgery.

Bioengineering approaches for modelling retinal pathologies of the outer blood-retinal barrier

Alterations of the junctional complex of the outer blood-retinal barrier (oBRB), which is integrated by the close interaction of the retinal pigment epithelium, the Bruch's membrane, and the choriocapillaris, contribute to the loss of neuronal signalling and subsequent vision impairment in several retinal inflammatory disorders such as age-related macular degeneration and diabetic retinopathy. Reductionist approaches into the mechanisms that underlie such diseases have been hindered by the absence of adequate in vitro models using human cells to provide the 3D dynamic architecture that enables expression of the in vivo phenotype of the oBRB. Conventional in vitro cell models are based on 2D monolayer cellular cultures, unable to properly recapitulate the complexity of living systems. The main drawbacks of conventional oBRB models also emerge from the cell sourcing, the lack of an appropriate Bruch's membrane analogue, and the lack of choroidal microvasculature with flow. In the last years, the advent of organ-on-a-chip, bioengineering, and stem cell technologies is providing more advanced 3D models with flow, multicellularity, and external control over microenvironmental properties. By incorporating additional biological complexity, organ-on-a-chip devices can mirror physiologically relevant properties of the native tissue while offering additional set ups to model and study disease. In this review we first examine the current understanding of oBRB biology as a functional unit, highlighting the coordinated contribution of the different components to barrier function in health and disease. Then we describe recent advances in the use of pluripotent stem cells-derived retinal cells, Bruch's membrane analogues, and co-culture techniques to recapitulate the oBRB. We finally discuss current advances and challenges of oBRB-on-a-chip technologies for disease modelling.

Soft Biomimetic 3D Free-Form Artificial Vascular Graft Using a Highly Uniform Microspherical Porous Structure

This study presents a biomimetic 3D customizable artificial vascular graft with a highly porous and uniform microscale structure. The structural features were obtained by dip coating of a highly close-packed microsphere suspension on a 3D printed sacrificial template. Considering the structured arrangement of microspherical porogens in the coating layer, the microsphere-leached constructs showed higher uniformity and porosity than the conventionally particulate-leached structures, leading to ultrasoft mechanical compliance. Considering biomechanical compatibility, the resulting elastic moduli were at the sub-MPa level, comparable with those of native vascular tissues. In addition, the developed porous graft was reinforced selectively at the edge regions using a nonporous coating to secure its practical sutureability for clinical use. The sufficiently low cytotoxicity was clinically confirmed to alleviate the stiffness mismatch issues at the anastomotic interface between the native tissue and the artificial graft, thus overcoming the relevant clinical complications. Furthermore, the overall superior properties could be implemented on the 3D printed template for patient-specific medicare, thus implying the manufacturability of patient-specific vascular grafts.

Influence of extracellular cues of hydrogel biomaterials on stem cell fate

Tissue engineering is a multidisciplinary field that focuses on creating functional tissue through the combination of biomimetic scaffolds, a cell source, and biochemical/physiochemical cues. Stem cells are often used as the cell source due to their multipotent properties and autologous sourcing; however, the combination of physical and chemical cues that regulate their behavior creates challenges in reproducibly directing them to a specific fate. Hydrogel biomaterials are widely explored as tissue scaffolds due to their innate biomimetic properties and tailorability. For these constructs to be successful, properties such as surface chemistry and spatial configuration, stiffness, and degradability of the biomaterial used for the scaffold framework should be analogous to the natural environment of the tissue they are repairing/replacing. This is imperative, as cues from the surrounding extracellular matrix (ECM) influence stem cell behavior and direct cell differentiation to a specific lineage. Hydrogels offer great promise as tools to control stem cell fate, as researchers can modulate the degradation rates, mechanical properties, swelling behavior, and chemical properties of the biomaterial scaffold to mimic the instructive cues of the native ECM. Discussion of the advantages and challenges of utilizing hydrogel biomaterials as the basis of tissue scaffolds is reviewed herein, as well as specific examples of hydrogels in tissue engineering and advances in hydrogel research to achieve desired cell phenotypes.