Antimicrobial peptides bind more strongly to membrane pores

Studies on a new antimicrobial peptide from Vibrio proteolyticus MT110

The marine environment is known for its vast diversity of the microbial population; however, less explored for bioactive compounds. In this study, an AMP produced by a new marine isolate, Vibrio proteolyticus MT110, showed broad-spectrum antimicrobial activity against Gram-positive and Gram-negative bacteria. The AMP was purified to homogeneity using ethyl acetate extraction followed by RP-HPLC, and LC-MS analysis showed its molecular weight as 980 Da. The MIC of AMP (peptide-MT110) was obtained in the 7.81-31.25 µg/mL range against different indicator strains. Peptide-MT110 showed stability of its antimicrobial activity at 15-121 °C and pH 4-10 and in the presence of various hydrolytic enzymes. The peaks at 1536 cm-1 and 1712 cm-1 wavenumbers in FTIR spectra confirmed the peptidic nature of AMP, and its amino acid analysis confirmed the presence of tyrosine and isoleucine. The antibacterial activity of peptide-MT110 is confirmed by PI assay and TEM. The optimization of peptide-MT110 production using statistical methods resulted in a 2.64-fold higher production. The physicochemical properties and stability in wide pH and temperature ranges showed the potential of peptide-MT110 for its development as a drug candidate. This is believed to be the first report on an AMP from Vibrio proteolyticus.

How Cell-Penetrating Peptides Behave Differently from Pore-Forming Peptides: Structure and Stability of Induced Transmembrane Pores

Peptide-induced transmembrane pore formation is commonplace in biology. Examples of transmembrane pores include pores formed by antimicrobial peptides (AMPs) and cell-penetrating peptides (CPPs) in bacterial membranes and eukaryotic membranes, respectively. In general, however, transmembrane pore formation depends on peptide sequences, lipid compositions, and intensive thermodynamic variables and is difficult to observe directly under realistic solution conditions, with structures that are challenging to measure directly. In contrast, the structure and phase behavior of peptide-lipid systems are relatively straightforward to map out experimentally for a broad range of conditions. Cubic phases are often observed in systems involving pore-forming peptides; however, it is not clear how the structural tendency to induce negative Gaussian curvature (NGC) in such phases is quantitatively related to the geometry of biological pores. Here, we leverage the theory of anisotropic inclusions and devise a facile method to estimate transmembrane pore sizes from geometric parameters of cubic phases measured from small-angle X-ray scattering (SAXS) and show that such estimates compare well with known pore sizes. Moreover, our model suggests that although AMPs can induce stable transmembrane pores for membranes with a broad range of conditions, pores formed by CPPs are highly labile, consistent with atomistic simulations.

Transmembrane β-Barrel Models of α-Synuclein Oligomers

The aggregation of α-synuclein is implicated in a number of neurodegenerative diseases, such as Parkinson's and Multiple System Atrophy, but the role of these aggregates in disease development is not clear. One possible mechanism of cytotoxicity is the disturbance or permeabilization of cell membranes by certain types of oligomers. However, no high-resolution structure of such membrane-embedded complexes has ever been determined. Here we construct and evaluate putative transmembrane β-barrels formed by this protein. Examination of the α-synuclein sequence reveals two regions that could form membrane-embedded β-hairpins: 64-92 (the NAC), and 35-56, which harbors many familial Parkinson's mutations. The stability of β-barrels formed by these hairpins is examined first in implicit membrane pores and then by multimicrosecond all-atom simulations. We find that a NAC region barrel remains stably inserted and hydrated for at least 10 μs. A 35-56 barrel remains stably inserted in the membrane but dehydrates and collapses if all His50 are neutral or if His50 is replaced by Q. If half of the His50 are doubly protonated, the barrel takes an oval shape but remains hydrated for at least 10 μs. Possible implications of these findings for α-synuclein pathology are discussed.

Putative Pore Structures of Amyloid β 25-35 in Lipid Bilayers

The amyloid β peptide aggregates to form extracellular plaques in the brains of Alzheimer's disease patients. Certain of its fragments have been found to have similar properties to those of the full-length peptide. The best-studied of these is 25-35, which aggregates into fibrils, is toxic to neurons, and forms ion channels in synthetic lipid bilayers. Here, we investigate possible pore-forming structures of oligomers of this peptide in a POPC/POPG membrane. We consider octameric and decameric β-barrels of different topology, strand orientation, and shear, evaluate their stability in an implicit membrane model, and subject the best models to multimicrosecond all-atom molecular dynamics simulations. We find two decameric structures that are kinetically stable in membranes on this time scale: an imperfectly closed antiparallel β-barrel with K28 in the pore lumen and a short parallel β-barrel with K28 toward the membrane interface. Both structures exhibit dehydrated gaps in the pore lumen, which are larger for the antiparallel barrel. Based on these results, the experimental cation selectivity, the dependence of ion channel activity on voltage direction, and certain mutation data, the parallel model seems more compatible with experimental data.

How cell penetrating peptides behave differently from pore forming peptides: structure and stability of induced transmembrane pores

Peptide induced trans-membrane pore formation is commonplace in biology. Examples of transmembrane pores include pores formed by antimicrobial peptides (AMPs) and cell penetrating peptides (CPPs) in bacterial membranes and eukaryotic membranes, respectively. In general, however, transmembrane pore formation depends on peptide sequences, lipid compositions and intensive thermodynamic variables and is difficult to observe directly under realistic solution conditions, with structures that are challenging to measure directly. In contrast, the structure and phase behavior of peptide-lipid systems are relatively straightforward to map out experimentally for a broad range of conditions. Cubic phases are often observed in systems involving pore forming peptides; however, it is not clear how the structural tendency to induce negative Gaussian curvature (NGC) in such phases is quantitatively related to the geometry of biological pores. Here, we leverage the theory of anisotropic inclusions and devise a facile method to estimate transmembrane pore sizes from geometric parameters of cubic phases measured from small angle X-ray scattering (SAXS) and show that such estimates compare well with known pore sizes. Moreover, our model suggests that whereas AMPs can induce stable transmembrane pores for membranes with a broad range of conditions, pores formed by CPPs are highly labile, consistent with atomistic simulations.

Putative Structures of Membrane-Embedded Amyloid β Oligomers

Perturbation of cell membranes by amyloid β (Ab) peptide oligomers is one possible mechanism of cytotoxicity in Alzheimer's disease, but the structure of such Ab-membrane complexes is unknown. Here we examine the stability of several putative structures by implicit membrane and all-atom molecular dynamics simulations. The structures include (a) a variety of models proposed by other researchers in the past, (b) a heptameric β barrel determined by grafting the Ab sequence onto α-hemolysin, (c) a similar structure with modified strand orientation and turn location based on an experimental β-hairpin structure, (d) oligomers inserting C-terminal β hairpins into one leaflet of the bilayer, (e) oligomers forming parallel C-terminal β barrels, and (f) a helical hexamer made of C-terminal fragments. The α-hemolysin-grafted structure and its alternately oriented variant are stable in the membrane and form an aqueous pore. In contrast, the C-terminal parallel barrels are not stable, presumably due to excessive hydrophobicity of their inner surface. The helical hexamer also failed to stabilize an aqueous pore for the same reason. The C-terminal hairpin-inserting structures remain stably inserted but, again, do not form an aqueous pore. Our results suggest that only β-barrels inserting a combination of C-terminal and other residues can form stable aqueous pores.

Peptides Isolated from Amphibian Skin Secretions with Emphasis on Antimicrobial Peptides

The skin of amphibians is a tissue with biological functions, such as defense, respiration, and excretion. In recent years, researchers have discovered a large number of peptides in the skin secretions of amphibians, including antimicrobial peptides, antioxidant peptides, bradykinins, insulin-releasing peptides, and other peptides. This review focuses on the origin, primary structure, secondary structure, length, and functions of peptides secreted from amphibians' skin. We hope that this review will provide further information and promote the further study of amphibian skin secretions, in order to provide reference for expanding the research and application of amphibian bioactive peptides.

Antioxidant and Antimicrobial Peptides Derived from Food Proteins

Recently, the demand for food proteins in the market has increased due to a rise in degenerative illnesses that are associated with the excessive production of free radicals and the unwanted side effects of various drugs, for which researchers have suggested diets rich in bioactive compounds. Some of the functional compounds present in foods are antioxidant and antimicrobial peptides, which are used to produce foods that promote health and to reduce the consumption of antibiotics. These peptides have been obtained from various sources of proteins, such as foods and agri-food by-products, via enzymatic hydrolysis and microbial fermentation. Peptides with antioxidant properties exert effective metal ion (Fe2+/Cu2+) chelating activity and lipid peroxidation inhibition, which may lead to notably beneficial effects in promoting human health and food processing. Antimicrobial peptides are small oligo-peptides generally containing from 10 to 100 amino acids, with a net positive charge and an amphipathic structure; they are the most important components of the antibacterial defense of organisms at almost all levels of life-bacteria, fungi, plants, amphibians, insects, birds and mammals-and have been suggested as natural compounds that neutralize the toxicity of reactive oxygen species generated by antibiotics and the stress generated by various exogenous sources. This review discusses what antioxidant and antimicrobial peptides are, their source, production, some bioinformatics tools used for their obtainment, emerging technologies, and health benefits.

Polydiacetylene vesicles acting as colorimetric sensor for the detection of plantaricin LD1

The interaction of antimicrobial peptides with membrane lipids plays a major role in numerous physiological processes. In this study, polydiacetylene (PDA) vesicles were synthesized using 10, 12-tricosadiynoic acid (TRCDA) and 1, 2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC). These vesicles were applied as artificial membrane biosensor for the detection of plantaricin LD1 purified from Lactobacillus plantarum LD1. Plantaricin LD1 (200 μg/mL) was able to interact with PDA vesicles by changing the color from blue to red with colorimetric response 30.26 ± 0.59. Nisin (200 μg/mL), used as control, also changed the color of the vesicles with CR% 50.56 ± 0.98 validating the assay. The vesicles treated with nisin and plantaricin LD1 showed increased infrared absorbance at 1411.46 and 1000-1150 cm^-1 indicated the interaction of bacteriocins with phospholipids and fatty acids, respectively suggesting membrane-acting nature of these bacteriocins. Further, microscopic observation of bacteriocin-treated vesicles showed several damages indicating the interaction of bacteriocins. These findings suggest that the PDA vesicles may be used as bio-mimetic sensor for the detection of bacteriocins produced by several probiotics in food and therapeutic applications.

Distinct Modes of Action of IAPP Oligomers on Membranes

Islet amyloid polypeptide (IAPP, also known as amylin) is a peptide hormone that is co-secreted with insulin by pancreatic β-cells and forms amyloid aggregates in type II diabetes. Various lines of evidence indicate that oligomers of this peptide may induce toxicity by disrupting or forming pores in cell membranes, but the structure of these pores is unknown. Here, we create models of pores for both helical and β-structured peptides using implicit membrane modeling and test their stability using multimicrosecond all-atom simulations. We find that the helical peptides behave similarly to antimicrobial peptides; they remain stably inserted in a highly tilted or partially unfolded configuration creating a narrow water channel. Parallel helix orientation creates a somewhat larger pore. An octameric β barrel of parallel β-hairpins is highly stable in the membrane, whereas the corresponding barrel made of antiparallel hairpins is not. We propose that certain experiments probe the helical pore state while others probe the β-structured pore state; this provides a possible explanation for lack of correlation that is sometimes observed between in vivo toxicity and in vitro liposome permeabilization experiments.

Advances in Molecular Understanding of α-Helical Membrane-Active Peptides

Biological membranes separate the interior of cells or cellular compartments from their outer environments. This barrier function of membranes can be disrupted by membrane-active peptides, some of which can spontaneously penetrate through the membranes or open leaky transmembrane pores. However, the origin of their activity/toxicity is not sufficiently understood for the development of more potent peptides. To this day, there are no design rules that would be generally valid, and the role of individual amino acids tends to be sequence-specific.In this Account, we describe recent progress in understanding the design principles that govern the activity of membrane-active peptides. We focus on α-helical amphiphilic peptides and their ability to (1) translocate across phospholipid bilayers, (2) form transmembrane pores, or (3) act synergistically, i.e., to produce a significantly more potent effect in a mixture than the individual components.We refined the description of peptide translocation using computer simulations and demonstrated the effect of selected residues. Our simulations showed the necessity to explicitly include charged residues in the translocation description to correctly sample the membrane perturbations they can cause. Using this description, we calculated the translocation of helical peptides with and without the kink induced by the proline/glycine residue. The presence of the kink had no effect on the translocation barrier, but it decreased the peptide affinity to the membrane and reduced the peptide stability inside the membrane. Interestingly, the effects were mainly caused by the peptide's increased polarity, not the higher flexibility of the kink.Flexibility plays a crucial role in pore formation and affects distinct pore structures in different ways. The presence of a kink destabilizes barrel-stave pores, because the kink prevents the tight packing of peptides in the bundle, which is characteristic of the barrel-stave structure. In contrast, the kink facilitates the formation of toroidal pores, where the peptides are only loosely arranged and do not need to closely assemble. The exact position of the kink in the sequence further determines the preferred arrangement of peptides in the pore, i.e., an hourglass or U-shaped structure. In addition, we demonstrated that two self-associated (via termini) helical peptides could mimic the behavior of peptides with a helix-kink-helix motif.Finally, we review the recent findings on the peptide synergism of the archetypal mixture of Magainin 2 and PGLa peptides. We focused on a bacterial plasma membrane mimic that contains negatively charged lipids and lipids with negative intrinsic curvature. We showed that the synergistic action of peptides was highly dependent on the lipid composition. When the lipid composition and peptide/lipid ratios were changed, the systems exhibited more complex behavior than just the previously reported pore formation. We observed membrane adhesion, fusion, and even the formation of the sponge phase in this regime. Furthermore, enhanced adhesion/partitioning to the membrane was reported to be caused by lipid-induced peptide aggregation.In conclusion, the provided molecular insight into the complex behavior of membrane-active peptides provides clues for the design and modification of antimicrobial peptides or toxins.

Membrane Binding of Antimicrobial Peptides Is Modulated by Lipid Charge Modification

Peptide interactions with lipid bilayers play a key role in a range of biological processes and depend on electrostatic interactions between charged amino acids and lipid headgroups. Antimicrobial peptides (AMPs) initiate the killing of bacteria by binding to and destabilizing their membranes. The multiple peptide resistance factor (MprF) provides a defense mechanism for bacteria against a broad range of AMPs. MprF reduces the negative charge of bacterial membranes through enzymatic conversion of the anionic lipid phosphatidyl glycerol (PG) to either zwitterionic alanyl-phosphatidyl glycerol (Ala-PG) or cationic lysyl-phosphatidyl glycerol (Lys-PG). The resulting change in the membrane charge is suggested to reduce the binding of AMPs to membranes, thus impeding downstream AMP activity. Using coarse-grained molecular dynamics to investigate the effects of these modified lipids on AMP binding to model membranes, we show that AMPs have substantially reduced affinity for model membranes containing Ala-PG or Lys-PG. More than 5000 simulations in total are used to define the relationship between lipid bilayer composition, peptide sequence (using five different membrane-active peptides), and peptide binding to membranes. The degree of interaction of a peptide with a membrane correlates with the membrane surface charge density. Free energy profile (potential of mean force) calculations reveal that the lipid modifications due to MprF alter the energy barrier to peptide helix penetration of the bilayer. These results will offer a guide to the design of novel peptides, which addresses the issue of resistance via MprF-mediated membrane modification.

Time-resolved SANS reveals pore-forming peptides cause rapid lipid reorganization

Time-resolved SANS showed alamethicin and melittin promote DMPC lipid vesicle mixing and perturb DMPC kinetics in similar ways.

Role of lipopolysaccharides and lipoteichoic acids on C-Chrysophsin-1 interactions with model Gram-positive and Gram-negative bacterial membranes

Antimicrobial peptides (AMPs) are attractive as biomaterial coatings because they have broad spectrum activity against different microbes, with a low likelihood of incurring antimicrobial resistance. Direct action against the bacterial membrane is the most common mechanism of action (MOA) of AMPs, with specific MOAs dependent on membrane composition, peptide concentration, and environmental factors that include temperature. Chrysophsin-1 (CHY1) is a broad spectrum salt-tolerant AMP that is derived from a marine fish. A cysteine modification was made to the peptide to facilitate attachment to a surface, such as a biomedical device. The authors used quartz crystal microbalance with dissipation monitoring to study how temperature (23 and 37 °C) and lipid composition influence the MOA of cysteine-modified peptide (C-CHY1) with model membranes comprised of supported lipid bilayers (SLBs). These two temperatures were used so that the authors could better understand the differences in behavior between typical lab temperatures and physiologic conditions. The authors created model membranes that mimicked properties of Gram-negative and Gram-positive bacteria in order to understand how the mechanisms might differ for different types of bacterial systems. SLB models of Gram-positive bacterial membranes were formed using combinations of phosphatidylcholine, phosphatidylglycerol (PG), and S. aureus-derived lipoteichoic acid (LTA). SLB models of Gram-negative bacterial membranes were formed using combinations of phosphatidylethanolamine (PE), PG, and E. coli-derived lipopolysaccharides (LPS). The molecules that distinguish Gram-positive and Gram-negative membranes (LTA and LPS) have the potential to alter the MOA of C-CHY1 with the SLBs. The authors' results showed that the MOA for the Gram-positive SLBs was not sensitive to temperature, but the LTA addition did have an effect. Specifically, similar trends in frequency and dissipation changes across all overtones were observed, and the same mechanistic trends were observed in the polar plots at 23 and 37 °C. However, when LTA was added, polar plots showed an association between C-CHY1 and LTA, leading to SLB saturation. This was demonstrated by significant changes in dissipation, while the frequency (mass) was not increasing after the saturation point. For the Gram-negative SLBs, the composition did not have a significant effect on MOA, but the authors saw more differences between the two temperatures studied. The authors believe this is due to the fact that the gel-liquid crystal transition temperature of PE is 25 °C, which means that the bilayer is more rigid at 23 °C, compared to temperatures above the transition point. At 23 °C, a significant energetic shift would be required to allow for additional AMP insertion. This could be seen in the polar plots, where there was a steep slope but there was very little mass addition. At 37 °C, the membrane is more fluid and there is less of an energetic requirement for insertion. Therefore, the authors observed greater mass addition and fewer changes in dissipation. A better understanding of C-CHY1 MOA using different SLB models will allow for the more rational design of future therapeutic solutions that make use of antimicrobial peptides, including those involving biomaterial coatings.

What Makes a Good Pore Former: A Study of Synthetic Melittin Derivatives

Pore formation by membrane-active peptides, naturally encountered in innate immunity and infection, could have important medical and technological applications. Recently, the well-studied lytic peptide melittin has formed the basis for the development of combinatorial libraries from which potent pore-forming peptides have been derived, optimized to work under different conditions. We investigate three such peptides, macrolittin70, which is most active at neutral pH; pHD15, which is active only at low pH; and MelP5_Δ6, which was rationally designed to be active at low pH but formed only small pores. There are three, six, and six acidic residues in macrolittin70, pHD15, and MelP5_Δ6, respectively. We perform multi-microsecond simulations in 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) of hexamers of these peptides starting from transmembrane orientations at neutral pH (all residues at standard protonation), low pH (acidic residues and His protonated), and highly acidic environments in which C-termini are also protonated. Previous simulations of the parent peptides melittin and MelP5 in 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) are repeated in POPC. We find that the most potent pore-forming peptides exhibit strong interpeptide interactions, including salt bridges, H-bonds, and polar interactions. Protonation of the C-terminus promotes helicity and pore size. The proximity of the peptides allows fewer lipid headgroups to line the pores than in previous simulations, making the pores intermediate between barrel stave and toroidal. Based on these structures and geometrical arguments, we attempt to rationalize the factors that under different conditions can increase or decrease pore stability and propose mutations that could be tested experimentally.

Hemoglobin Reassembly of Antimicrobial Fragments from the Midgut of Triatoma infestans

Hemoglobin is one of the most important molecules of the human body. Beyond its physiological activity, hemoglobins are able to inhibit the growth of several microorganisms. Since 1999, studies have reported that antimicrobial peptides can be produced by blood-feeding insects through hemoglobin digestion, and it has been reported that Triatoma infestans can generate an antimicrobial fragment from human fibrinopeptide. Thus T. infestans intestinal content was analyzed through Reverse Phase High-Performance Liquid Chromatography (RP-HPLC), the eluted fractions were tested against Micrococcus luteus, Escherichia coli and Staphylococcus aureus, and the active fractions submitted to mass spectrometry. The data obtained were compared to hemoglobin databases to verify the presence of hemoglobin-derived fragments. Ten fractions eluted from chromatography presented antimicrobial activity, and when analyzed through mass spectrometry revealed the presence of 8 murine hemoglobin α-chain fragments and 24 fragments from murine hemoglobin β fragments. Through the compilation of the fragments is possible to obtain over 67% coverage of both sequences. Part of the amino acid sequences corresponds to the sequences already identified on other intestinal contents of arthropods, and are highly conserved between the blood of other wild animals that are the most common intermediate hosts of Chagas’ disease in Brazil and some of the main natural blood source for triatomines.

Interactions of Designed Trp-Containing Antimicrobial Peptides with DNA of Multidrug-Resistant Pseudomonas aeruginosa

To investigate the intracellular mechanisms of seven Trp-containing peptides in clinically isolated multidrug-resistant Pseudomonas aeruginosa (MRPA0108). The results showed that the Trp-containing peptides had high antibacterial activity against the MRPA0108 strain, with minimal inhibitory concentration (MIC) values ranging from 6.25 to 25 μM. The peptides rapidly and completely killed the MRPA0108 at a concentration of 16 × MIC at 60-90 min. The Trp-containing peptides were found to penetrate the bacterial cell membrane and accumulate in the cells. A DNA gel retardation assay indicated that the peptides were able to bind with the genomic DNA of MRPA0108 cells; L5W exhibited a stronger DNA binding ability than that of the other peptides, and the ratio of peptide to DNA was 0.62/1. Next, the UV absorption spectrum of the DNA indicated that L5W interacted with the MRPA0108 genomic DNA and intercalated into the groove of the DNA molecule, resulting in loosening of the double-helical structure of the originally contracted DNA and leading to the occurrence of a hyperchromic effect. The circular dichroism spectrum suggested that I1W and L5W associated with the DNA via a trench combination mode resulting from the compact structure of the DNA double helix and reduction in ππ accumulation between base pairs. Furthermore, real-time quantitative PCR demonstrated that the Trp-containing peptides could downregulate the expression of DNA replication-initiating genes in MRPA0108 cells. MRPA0108 DNA may be a potential active target for the antimicrobial activity of Trp-containing peptides.

Anti-amoebic activity of a cecropin-melittin hybrid peptide (CM11) against trophozoites of Entamoeba histolytica

Entamoeba histolytica is an intestinal parasite that is located in the lumen of the human intestine and can attack the epithelium. Antimicrobial peptides (AMPs) are effective against the wide range of microorganisms, such as bacteria, fungi, viruses, yeasts, and protozoa. The CM11 is a chimeric peptide that is derived from bee venom and butterfly compounds. In this study, the cytotoxic effect of CM11 on Human colonic carcinoma (Caco‑2) cells and E. histolytica were assayed in various concentrations of peptide and metronidazole. The MTT results showed that the highest percentage of cytotoxicity on Caco‑2 cells was in 24 μg/ml of CM11 peptide at 24 h and 48 h, which was 49.8%, and 44.3%, respectively. In the metronidazole group, the highest cytotoxicity with 40 μg/ml concentration was observed after 24 h and 48 h, with 43.5%, and 42.1%, respectively. The highest rate of apoptosis induced by CM11 on Caco‑2 was 53.9% and 51.4% after 24 h and 48 h, respectively; however, these rates were 19.1% and 33.4% in the metronidazole group. The effect of peptide and metronidazole on E. histolytica at 24 h and 48 h showed that at the highest concentration of CM11 peptide (24 μg/ml) the cytotoxic effect was 93.7% and 94.9% and for metronidazole (40 μg/ml) was 65.5% and 74.3%, respectively. In coculture, 63.5% and 57.7% of parasites were killed in the highest concentration of CM11 and metronidazole, respectively. The results of this study revealed that CM11 peptide has a high toxicity on E. histolytica, and the use of antimicrobial peptides in the future can be considered as anti-amoebic compounds.

Anti-Tumor Effects of Melittin and Its Potential Applications in Clinic

Melittin, a major component of bee venom, is a water-soluble toxic peptide of which a various biological effects have been identified to be useful in anti-tumor therapy. In addition, Melittin also has anti-parasitic, anti-bacterial, anti-viral, and anti-inflammatory activities. Therefore, it is a very attractive therapeutic candidate for human diseases. However, melittin induces extensive hemolysis, a severe side effect that dampens its future development and clinical application. Thus, studies of melittin derivatives and new drug delivery systems have been conducted to explore approaches for optimizing the efficacy of this compound, while reducing its toxicity. A number of reviews have focused on each side, respectively. In this review, we summarize the research progress on the anti-tumor effects of melittin and its derivatives, and discuss its future potential clinical applications.

Cystic Fibrosis and Pseudomonas aeruginosa: the Host-Microbe Interface

In human pathophysiology, the clash between microbial infection and host immunity contributes to multiple diseases. Cystic fibrosis (CF) is a classical example of this phenomenon, wherein a dysfunctional, hyperinflammatory immune response combined with chronic pulmonary infections wreak havoc upon the airway, leading to a disease course of substantial morbidity and shortened life span. Pseudomonas aeruginosa is an opportunistic pathogen that commonly infects the CF lung, promoting an accelerated decline of pulmonary function. Importantly, P. aeruginosa exhibits significant resistance to innate immune effectors and to antibiotics, in part, by expressing specific virulence factors (e.g., antioxidants and exopolysaccharides) and by acquiring adaptive mutations during chronic infection. In an effort to review our current understanding of the host-pathogen interface driving CF pulmonary disease, we discuss (i) the progression of disease within the primitive CF lung, specifically focusing on the role of host versus bacterial factors; (ii) critical, neutrophil-derived innate immune effectors that are implicated in CF pulmonary disease, including reactive oxygen species (ROS) and antimicrobial peptides (e.g., LL-37); (iii) P. aeruginosa virulence factors and adaptive mutations that enable evasion of the host response; and (iv) ongoing work examining the distribution and colocalization of host and bacterial factors within distinct anatomical niches of the CF lung.

Functional Mechanisms Underlying the Antimicrobial Activity of the Oryza sativa Trx-like Protein

Plants are constantly subjected to a variety of environmental stresses and have evolved regulatory responses to overcome unfavorable conditions that might reduce or adversely change a plant’s growth or development. Among these, the regulated production of reactive oxygen species (ROS) as a signaling molecule occurs during plant development and pathogen defense. This study demonstrates the possible antifungal activity of Oryza sativa Tetratricopeptide Domain-containing thioredoxin (OsTDX) protein against various fungal pathogens. The transcription of OsTDX was induced by various environmental stresses known to elicit the generation of ROS in plant cells. OsTDX protein showed potent antifungal activity, with minimum inhibitory concentrations (MICs) against yeast and filamentous fungi ranging between 1.56 and 6.25 and 50 and 100 µg/mL, respectively. The uptake of SYTOX-Green into fungal cells and efflux of calcein from artificial fungus-like liposomes suggest that its killing mechanism involves membrane permeabilization and damage. In addition, irregular blebs and holes apparent on the surfaces of OsTDX-treated fungal cells indicate the membranolytic action of this protein. Our results suggest that the OsTDX protein represents a potentially useful lead for the development of pathogen-resistant plants.

Mechanistic Landscape of Membrane-Permeabilizing Peptides

Membrane permeabilizing peptides (MPPs) are as ubiquitous as the lipid bilayer membranes they act upon. Produced by all forms of life, most membrane permeabilizing peptides are used offensively or defensively against the membranes of other organisms. Just as nature has found many uses for them, translational scientists have worked for decades to design or optimize membrane permeabilizing peptides for applications in the laboratory and in the clinic ranging from antibacterial and antiviral therapy and prophylaxis to anticancer therapeutics and drug delivery. Here, we review the field of membrane permeabilizing peptides. We discuss the diversity of their sources and structures, the systems and methods used to measure their activities, and the behaviors that are observed. We discuss the fact that "mechanism" is not a discrete or a static entity for an MPP but rather the result of a heterogeneous and dynamic ensemble of structural states that vary in response to many different experimental conditions. This has led to an almost complete lack of discrete three-dimensional active structures among the thousands of known MPPs and a lack of useful or predictive sequence-structure-function relationship rules. Ultimately, we discuss how it may be more useful to think of membrane permeabilizing peptides mechanisms as broad regions of a mechanistic landscape rather than discrete molecular processes.

Computational studies of peptide-induced membrane pore formation

A variety of peptides induce pores in biological membranes; the most common ones are naturally produced antimicrobial peptides (AMPs), which are small, usually cationic, and defend diverse organisms against biological threats. Because it is not possible to observe these pores directly on a molecular scale, the structure of AMP-induced pores and the exact sequence of steps leading to their formation remain uncertain. Hence, these questions have been investigated via molecular modelling. In this article, we review computational studies of AMP pore formation using all-atom, coarse-grained, and implicit solvent models; evaluate the results obtained and suggest future research directions to further elucidate the pore formation mechanism of AMPs.This article is part of the themed issue 'Membrane pores: from structure and assembly, to medicine and technology'.

Mode of action of plectasin-derived peptides against gas gangrene-associated Clostridium perfringens type A

NZ2114 and MP1102 are novel plectasin-derived peptides with potent activity against Gram-positive bacteria. The antibacterial characteristics and mechanism of NZ2114 and MP1102 against gas gangrene-associated Clostridium perfringens were studied for the first time. The minimal inhibitory concentration and minimal bactericidal concentration of NZ2114 and MP1102 against resistant C. perfringens type A strain CVCC 46 were 0.91 μM. Based on the fractional inhibitory concentration index (FICI) result, an additive or synergic effect was observed between NZ2114 (FICI = 0.5~0.75) or MP1102 (FICI = 0.375~1.0) and antibiotics. The flow cytometry, scanning and transmission electron microscopy analysis showed that both NZ2114 and MP1102 induced obviously membrane damage, such as the leakage of cellular materials, partial disappearance of the cell membrane and membrane peeling, as well as retracting cytoplasm and ghost cell. The gel retardation and circular dichroism (CD) detection showed that NZ2114 and MP1102 could bind to C. perfringens genomic DNA and change the DNA conformation. Moreover, NZ2114 also interfered with the double helix and unwind the genomic DNA. The cell cycle analysis showed that C. perfringens CVCC 46 cells exposed to NZ2114 and MP1102 were arrested at the phase I. These data indicated that both NZ2114 and MP1102 have potential as new antimicrobial agents for gas gangrene infection resulting from resistant C. perfringens.

Antimicrobial Peptides Share a Common Interaction Driven by Membrane Line Tension Reduction

Antimicrobial peptides (AMPs) are a class of host-defense molecules that neutralize a broad range of pathogens. Their membrane-permeabilizing behavior has been commonly attributed to the formation of pores; however, with the continuing discovery of AMPs, many are uncharacterized and their exact mechanism remains unknown. Using atomic force microscopy, we previously characterized the disruption of model membranes by protegrin-1 (PG-1), a cationic AMP from pig leukocytes. When incubated with zwitterionic membranes of dimyristoylphosphocholine, PG-1 first induced edge instability at low concentrations, then porous defects at intermediate concentrations, and finally worm-like micelle structures at high concentrations. These rich structural changes suggested that pore formation constitutes only an intermediate state along the route of PG-1's membrane disruption process. The formation of these structures could be best understood by using a mesophase framework of a binary mixture of lipids and peptides, where PG-1 acts as a line-active agent in lowering interfacial bilayer tensions. We have proposed that rather than being static pore formers, AMPs share a common ability to lower interfacial tensions that promote membrane transformations. In a study of 13 different AMPs, we found that peptide line-active behavior was not driven by the overall charge, and instead was correlated with their adoption of imperfect secondary structures. These peptide structures commonly positioned charged residues near the membrane interface to promote deformation favorable for their incorporation into the membrane. Uniquely, the data showed that barrel-stave-forming peptides such as alamethicin are not line-active, and that the seemingly disparate models of toroidal pores and carpet activity are actually related. We speculate that this interplay between peptide structure and the distribution of polar residues in relation to the membrane governs AMP line activity in general and represents a novel, to our knowledge, avenue for the rational design of new drugs.

Computational prediction of the optimal oligomeric state for membrane-inserted β-barrels of protegrin-1 and related mutants

Protegrin-1 is a widely studied 18-residue β-hairpin antimicrobial peptide. Evidence suggests that it acts via a β-barrel pore formation mechanism, but the exact number of peptides comprising the pore state is unknown. In this study, we performed molecular dynamics simulations of β-barrels of protegrin and three related mutants (v14v16l, v14v16a, and r4n) in NCNC parallel topology in implicit membrane pores of varying radius and curvature for oligomeric numbers 6-14. We then identified the optimal pore radius and curvature values for all constructs and determined the total effective energy and the translational and rotational entropic losses. These, along with an estimate of membrane deformation free energy from experimental line tension values, provided an estimate of the overall energetics of formation of each pore state. The results indicated that oligomeric numbers 7-13 are generally stable, allowing the possibility of a heterogeneous pore state. The optimal oligomeric state for protegrin is the nonamer, shifting to higher numbers for the mutants. Protegrin, v14v16l, and r4n are stable as membrane-inserted β-barrels, but v14v16a seems much less so because of its decreased hydrophobicity. Copyright © 2017 European Peptide Society and John Wiley & Sons, Ltd.

Engineering monolayer poration for rapid exfoliation of microbial membranes

A novel mechanism of monolayer poration leading to the rapid exfoliation and lysis of microbial membranes is reported.

The spread of bacterial resistance to traditional antibiotics continues to stimulate the search for alternative antimicrobial strategies. All forms of life, from bacteria to humans, are postulated to rely on a fundamental host defense mechanism, which exploits the formation of open pores in microbial phospholipid bilayers. Here we predict that transmembrane poration is not necessary for antimicrobial activity and reveal a distinct poration mechanism that targets the outer leaflet of phospholipid bilayers. Using a combination of molecular-scale and real-time imaging, spectroscopy and spectrometry approaches, we introduce a structural motif with a universal insertion mode in reconstituted membranes and live bacteria. We demonstrate that this motif rapidly assembles into monolayer pits that coalesce during progressive membrane exfoliation, leading to bacterial cell death within minutes. The findings offer a new physical basis for designing effective antibiotics.

Molecular dynamics simulations of biological membranes and membrane proteins using enhanced conformational sampling algorithms

This paper reviews various enhanced conformational sampling methods and explicit/implicit solvent/membrane models, as well as their recent applications to the exploration of the structure and dynamics of membranes and membrane proteins. Molecular dynamics simulations have become an essential tool to investigate biological problems, and their success relies on proper molecular models together with efficient conformational sampling methods. The implicit representation of solvent/membrane environments is reasonable approximation to the explicit all-atom models, considering the balance between computational cost and simulation accuracy. Implicit models can be easily combined with replica-exchange molecular dynamics methods to explore a wider conformational space of a protein. Other molecular models and enhanced conformational sampling methods are also briefly discussed. As application examples, we introduce recent simulation studies of glycophorin A, phospholamban, amyloid precursor protein, and mixed lipid bilayers and discuss the accuracy and efficiency of each simulation model and method. This article is part of a Special Issue entitled: Membrane Proteins edited by J.C. Gumbart and Sergei Noskov.

Free Energy Calculations for the Peripheral Binding of Proteins/Peptides to an Anionic Membrane. 1. Implicit Membrane Models

The binding of peptides and proteins to the surface of complex lipid membranes is important in many biological processes such as cell signaling and membrane remodeling. Computational studies can aid experiments by identifying physical interactions and structural motifs that determine the binding affinity and specificity. However, previous studies focused on either qualitative behaviors of protein/membrane interactions or the binding affinity of small peptides. Motivated by this observation, we set out to develop computational protocols for bimolecular binding to charged membranes that are applicable to both peptides and large proteins. In this work, we explore a method based on an implicit membrane/solvent model (generalized Born with a simple switching in combination with the Gouy-Chapman-Stern model for a charged interface), which we expect to lead to useful results when the binding does not implicate significant membrane deformation and local demixing of lipids. We show that the binding free energy can be efficiently computed following a thermodynamic cycle similar to protein-ligand binding calculations, especially when a Bennett acceptance ratio based protocol is used to consider both the membrane bound and solution conformational ensembles. Test calculations on a series of peptides show that our computational approach leads to binding affinities in encouraging agreement with experimental data, including for the challenging example of the bringing of flexible MARCKS-ED peptides to membranes. The calculations highlight that for a membrane with a significant fraction of anionic lipids, it is essential to include the effect of ion adsorption using the Stern model, which significantly modifies the effective surface charge. This implicit membrane model based computational protocol helps lay the groundwork for more systematic analysis of protein/peptide binding to membranes of complex shape and composition.

Multistep Molecular Dynamics Simulations Identify the Highly Cooperative Activity of Melittin in Recognizing and Stabilizing Membrane Pores

The prototypical antimicrobial peptide, melittin, is well-known for its ability to induce pores in zwitterionic model lipid membranes. However, the mechanism by which melittin accomplishes this is not fully understood. We have conducted all-atom and coarse-grained molecular dynamics simulations which suggest that melittin employs a highly cooperative mechanism for the induction of both small and large membrane pores. The process by which this peptide induces membrane pores appears to be driven by its affinity to membrane defects via its N-terminus region. In our simulations, a membrane defect was deliberately created through either lipid flip-flop or the reorientation of one adsorbed melittin peptide. In a cooperative response, other melittin molecules also inserted their N-termini into the created defect, thus lowering the overall free energy. The insertion of these peptide molecules ultimately allowed the defect to develop into a small transmembrane pore, with an estimated diameter of ∼1.5 nm and a lifetime of the order of tens of milliseconds. In the presence of a finite membrane tension, we show that this small pore can act as a nucleation site for the stochastic rupture of the lipid bilayer, so as to create a much larger pore. We found that a threshold membrane tension of 25 mN/m was needed to create a ruptured pore. Furthermore, by actively accumulating at its edge, adsorbed peptides are able to cooperatively stabilize this larger pore. The defect-mediated pore formation mechanism revealed in this work may also apply to other amphipathic membrane-active peptides.

Antimicrobial response is increased in the testis of European sea bass, but not in gilthead seabream, upon nodavirus infection

Antimicrobial peptides (AMPs) have a crucial role in the fish innate immune response, being considered a fundamental component of the first line of defence against pathogens. Moreover, AMPs have not been studied in the fish gonad since this is used by some pathogens as a vehicle or a reservoir to be transmitted to the progeny, as occurs with nodavirus (VNNV), which shows vertical transmission through the gonad and/or gonadal fluids, but no study has looked into the gonad of infected fish. In this framework, we have characterized the antimicrobial response triggered by VNNV in the testis of European sea bass, a very susceptible species of the virus, and in the gilthead seabream, which acts as a reservoir, both in vivo and in vitro, and compared with that present in the serum and brain (target tissue of VNNV). First, our data show a great antiviral response in the brain of gilthead seabream and in the gonad of European sea bass. In addition, for the first time, our results demonstrate that the antimicrobial activities (complement, lysozyme and bactericidal) and the expression of AMP genes such as complement factor 3 (c3), lysozyme (lyz), hepcidin (hamp), dicentracin (dic), piscidin (pis) or β-defensin (bdef) in the gonad of both species are very different, but generally activated in the European sea bass, probably related with the differences of susceptibility upon VNNV infection, and even differs to the brain response. Furthermore, the in vitro data suggest that some AMPs are locally regulated playing a local immune response in the gonad, while others are more dependent of the systemic immune system. Data are discussed in the light to ascertain their potential role in viral clearance by the gonad to avoid vertical transmission.

The longevity of the antimicrobial response in rainbow trout (Oncorhynchus mykiss) fed a peptidoglycan (PG) supplemented diet

This study builds upon previous work studying antimicrobial peptide (AMP) gene expression in rainbow trout (Oncorhynchus mykiss) fed a peptidoglycan (PG) enriched diet. The aims here were 1) to evaluate how long AMP expression is elevated in skin with continuous feeding of fish with the PG enriched diet for 21 or 28 days, and 2) to assess the impact of stopping PG feeding at day 14 when sampled at day 21 or 28. The rainbow trout were divided into 6 groups, with two fed a control commercial diet for the duration of the experiment and the other four given the same diet enriched with 10 mg PG/Kg for 14 days (PG 1-14) or continuously (PG continuous), the former reverting back to the commercial diet at day 14. No mortalities occurred during the study and there were no significant differences in growth among the fish in the different diet groups. The expression of six AMP genes was studied by real-time PCR in the skin, since these genes were shown to be induced in response to the PG enriched diets in a previous experiment. We show that continuous PG treatment for 21 or 28 days maintained high levels of AMP expression, although in general the levels decreased with time on the diets. Withdrawal of the PG diets at day 14 resulted in a fall in expression level especially apparent with omCATH-1, omCATH-2 and omLEAP-2a, but with omDB-3 and omDB-4 remaining at elevated levels (x10) in comparison to fish given a control diet. These results confirm that orally administered PG clearly enhances the trout innate immune system and could be used as a means to boost fish defences. Future studies should be conducted to verify the impact on survival after pathogen challenge in trout fed PG enriched diets under these regimes.

In vitro and in vivo characterization of a new recombinant antimicrobial peptide, MP1102, against methicillin-resistant Staphylococcus aureus

Currently, more antimicrobial drug candidates are urgently needed to combat the rise in drug-resistance among pathogenic microbes. A new antimicrobial peptide, MP1102, a variant of NZ2114, was designed, evaluated, and overexpressed in Pichia pastoris. The total secreted protein in cultures reached 695 mg/l, and the concentration of the recombinant MP1102 (rMP1102) was 292 mg/l. rMP1102 was purified from the fermentation supernatant by one-step cation exchange chromatography to obtain a yield of 197.1 mg/l with 96.4 % purity. rMP1102 exhibited potent activity against Gram-positive bacteria, and its minimum inhibitory concentrations (MICs) for four Staphyloccocus aureus (S. aureus) strains ranged from 0.028 to 0.11 μM, and it had stronger activity (MIC = 0.04 to 0.23 μM) to 20 clinical isolates of MRSA (cMRSA) than rNZ2114 (MIC = 0.11 to 0.90 μM). rMP1102 was shown to kill over 99.9 % of tested S. aureus cells within 6 h when treated at one, two, and four times its MIC and over 90 % of S. aureus cells within 12 h at concentrations of 5, 10, and 20 mg/kg in a mouse thigh infection model. The higher sensitivity of MRSA to MP1102 than to its parental peptide, NZ2114, indicated by this initial pharmacodynamic analysis suggests a possible difference in the killing mechanism of these two molecules. rMP1102 caused less than 0.05 % hemolytic activity at 128 μg/ml and exhibited good thermostability from 20 to 80 °C, with its highest activity being observed at pH 8.0. These results suggest that this yeast expression system is feasible for large-scale production, and rMP1102 exerted stronger activity against S. aureus than NZ2114 via a different mechanism and exhibited potential as a new antimicrobial agent for S. aureus, especially MRSA infections.

Amphipathic membrane-active peptides recognize and stabilize ruptured membrane pores: exploring cause and effect with coarse-grained simulations

Induction of membrane pores has been suggested as the common molecular action by which a variety of amphipathic membrane-active peptides cause damage to cells. In this study, we have performed coarse-grained molecular dynamics simulations to establish two clear molecular processes that seem critical for the activity of amphipathic peptides. They are (i) the recognition and (ii) the stabilization of ruptured membrane pores. By considering 12 structurally different peptide types, we reveal that peptide secondary structure content, hydrophobicity, and length are important physicochemical factors that allow amphipathic peptides to aggregate in and stabilize ruptured membrane pores. The simulated inner diameters of peptide-stabilized membrane pores are in good agreement with available experimental data. However, the orientations of α-helical peptides in the membrane pore were found to be quite dispersed. This supports recent challenges to the traditional depictions to peptide orientations in the classical toroidal and barrel-stave pore models.

3D hydrophobic moment vectors as a tool to characterize the surface polarity of amphiphilic peptides

The interaction of membranes with peptides and proteins is largely determined by their amphiphilic character. Hydrophobic moments of helical segments are commonly derived from their two-dimensional helical wheel projections, and the same is true for β-sheets. However, to the best of our knowledge, there exists no method to describe structures in three dimensions or molecules with irregular shape. Here, we define the hydrophobic moment of a molecule as a vector in three dimensions by evaluating the surface distribution of all hydrophilic and lipophilic regions over any given shape. The electrostatic potential on the molecular surface is calculated based on the atomic point charges. The resulting hydrophobic moment vector is specific for the instantaneous conformation, and it takes into account all structural characteristics of the molecule, e.g., partial unfolding, bending, and side-chain torsion angles. Extended all-atom molecular dynamics simulations are then used to calculate the equilibrium hydrophobic moments for two antimicrobial peptides, gramicidin S and PGLa, under different conditions. We show that their effective hydrophobic moment vectors reflect the distribution of polar and nonpolar patches on the molecular surface and the calculated electrostatic surface potential. A comparison of simulations in solution and in lipid membranes shows how the peptides undergo internal conformational rearrangement upon binding to the bilayer surface. A good correlation with solid-state NMR data indicates that the hydrophobic moment vector can be used to predict the membrane binding geometry of peptides. This method is available as a web application on http://www.ibg.kit.edu/HM/.

Implicit Membrane Investigation of the Stability of Antimicrobial Peptide β-Barrels and Arcs

Previous simulations showed that the β-hairpin antimicrobial peptide (AMP) protegrin-1 can form stable octameric β-barrels and tetrameric arcs (half barrels) in both implicit and explicit membranes. Here, we extend this investigation to several AMPs of similar structure: tachyplesin, androctonin, polyphemusin, gomesin, and the retrocyclin θ-defensin. These peptides form short β-hairpins stabilized by 2-3 disulfide bonds. We also examine synthetic β-sheet peptides selected from a combinatorial library for their ability or inability to form pores in lipid membranes. When heptameric, octameric, and decameric β-barrels and tetrameric arcs of these peptides were embedded in pre-formed neutral or anionic lipid pores (i.e., pores in neutral or anionic membranes, respectively), a variety of behaviors and membrane binding energies were observed. Due to the cationic charge of the peptides, more favorable transfer energies and more stable binding were observed in anionic than neutral pores. The synthetic peptides bound very strongly and formed stable barrels and arcs in both neutral and anionic pores. The natural AMPs exhibited unfavorable or marginally favorable binding energy and kinetic stability in neutral pores, consistent with the lower hemolytic activity of some of them compared with protegrin-1. Binding to anionic pores was more favorable, but significant distortions of the barrel or arc structures were sometimes noted. These results are discussed in light of the available experimental data. The diversity of behaviors obtained makes it unlikely that the barrel and arc mechanisms are valid for the entire family of β-hairpin AMPs.

Rapid isolation of extracellular vesicles from cell culture and biological fluids using a synthetic peptide with specific affinity for heat shock proteins

Recent studies indicate that extracellular vesicles are an important source material for many clinical applications, including minimally-invasive disease diagnosis. However, challenges for rapid and simple extracellular vesicle collection have hindered their application. We have developed and validated a novel class of peptides (which we named venceremin, or Vn) that exhibit nucleotide-independent specific affinity for canonical heat shock proteins. The Vn peptides were validated to specifically and efficiently capture HSP-containing extracellular vesicles from cell culture growth media, plasma, and urine by electron microscopy, atomic force microscopy, sequencing of nucleic acid cargo, proteomic profiling, immunoblotting, and nanoparticle tracking analysis. All of these analyses confirmed the material captured by the Vn peptides was comparable to those purified by the standard ultracentrifugation method. We show that the Vn peptides are a useful tool for the rapid isolation of extracellular vesicles using standard laboratory equipment. Moreover, the Vn peptides are adaptable to diverse platforms and therefore represent an excellent solution to the challenge of extracellular vesicle isolation for research and clinical applications.

Protein arcs may form stable pores in lipid membranes

Electron microscopy and atomic force microscopy images of cholesterol-dependent cytolysins and related proteins that form large pores in lipid membranes have revealed the presence of incomplete rings, or arcs. Some evidence indicates that these arcs are inserted into the membrane and induce membrane leakage, but other experiments seem to refute that. Could such pores, only partially lined by protein, be kinetically and thermodynamically stable? How would the lipids be structured in such a pore? Using the antimicrobial peptide protegrin-1 as a model, we test the stability of pores only partially lined by peptide using all-atom molecular dynamics simulations in POPC and POPE/POPG membranes. The data show that, whereas pure lipid pores close rapidly, pores partially lined by protegrin arcs are stable for at least 300 ns. Estimates of the thermodynamic stability of these arcs using line tension data and implicit solvent calculations show that these arcs can be marginally stable in both zwitterionic and anionic membranes. Arcs provide an explanation for the observed ion selectivity in protegrin electrophysiology experiments and could possibly be involved in other membrane permeabilization processes where lipids are thought to participate, such as those induced by antimicrobial peptides and colicins, as well as the Bax apoptotic pore.

Conformational and thermodynamic properties of non-canonical α,α-dialkyl glycines in the peptaibol Alamethicin: molecular dynamics studies

In this work, we investigate the structure, dynamic and thermodynamic properties of noncanonical disubstituted amino acids (α,α-dialkyl glycines), also known as non-natural amino acids, in the peptaibol Alamethicin. The amino acids under study are Aib (α-amino isobutyric acid or α-methyl alanine), Deg (α,α-diethyl glycine), Dpg (α,α-dipropyl glycine), Dibg (α,α-di-isobutyl glycine), Dhg (α,α-dihexyl glycine), DΦg (α,α-diphenyl glycine), Dbzg (α,α-dibenzyl glycine), Ac6c (α,α-cyclohexyl glycine), and Dmg (α,α-dihydroxymethyl glycine). It is hypothesized that these amino acids are able to induce well-defined secondary structure in peptidomimetics. To test this hypothesis, new peptidomimetics of Alamethicin were constructed by replacing the native Aib positions of Alamethicin by one or more new α,α-dialkyl glycines. Dhg and Ac6c demonstrated the capacity to induce well-defined α-helical structures. Dhg and Ac6c also promote the thermodynamic stabilization of these peptides in a POPC model membrane and are better alternatives to the Aib in Alamethicin. These noncanonical amino acids also improved secondary structure properties, revealing preorganization in water and maintenance of α helical structure in POPC. We show that it is possible to optimize the helicity and thermodynamic properties of native Alamethicin, and we suggest that these amino acids could be incorporated in other peptides with similar structural effect.

Transmission electron microscopic morphological study and flow cytometric viability assessment of Acinetobacter baumannii susceptible to Musca domestica cecropin

Multidrug-resistant (MDR) Acinetobacter baumannii infections are difficult to treat owing to the extremely limited armamentarium. Expectations about antimicrobial peptides' use as new powerful antibacterial agents have been raised on the basis of their unique mechanism of action. Musca domestica cecropin (Mdc), a novel antimicrobial peptide from the larvae of Housefly (Musca domestica), has potently active against Gram-positive and Gram-negative bacteria standard strain. Here we evaluated the antibacterial activity of Mdc against clinical isolates of MDR-A. baumannii and elucidate the related antibacterial mechanisms. The minimal inhibitory concentration (MIC) of Mdc was 4 μg/mL. Bactericidal kinetics of Mdc revealed rapid killing of A. baumannii (30 min). Flow cytometry using viability stain demonstrated that Mdc causes A. baumannii membrane permeabilization in a concentration- and time-dependent process, which correlates with the bactericidal action. Moreover, transmission electron microscopic (TEM) examination showed that Mdc is capable of disrupting the membrane of bacterial cells, resulting in efflux of essential cytoplasmic components. Overall, Mdc could be a promising antibacterial agent for MDR-A. baumannii infections.