Nitrate removal from pharmaceutical wastewater using microbial electrochemical system supplied through low frequency-low voltage alternating electric current

Frequency-modulated alternating current-driven bioelectrodes for enhanced mineralization of Alizarin Yellow R

The alternating current (AC)-driven bioelectrochemical process, in-situ coupling cathodic reduction and anodic oxidation in a single electrode, offers a promising way for the mineralization of refractory aromatic pollutants (RAPs). Frequency modulation is vital for aligning reduction and oxidation phases in AC-driven bioelectrodes, potentially enhancing their capability to mineralize RAPs. Herein, a frequency-modulated AC-driven bioelectrode was developed to enhance RAP mineralization, exemplified by the degradation of Alizarin Yellow R (AYR). Optimal performance was achieved at a frequency of 1.67 mHz, resulting in the highest efficiency for AYR decolorization and subsequent mineralization of intermediates. Performance declined at both higher (3.33 and 8.30 mHz) and lower (0.83 mHz) frequencies. The bioelectrode exhibited superior electron utilization, bidirectional electron transfer, and redox bifunctionality, effectively aligning reduction and oxidation processes to enhance AYR mineralization. The 1.67 mHz frequency facilitated the assembly of a collaborative microbiome dedicated to AYR bio-mineralization, characterized by an increased abundance of functional consortia proficient in azo dye reduction (e.g., Stenotrophomonas and Shinella), aromatic intermediates oxidation (e.g., Sphingopyxis and Sphingomonas), and electron transfer (e.g., Geobacter and Pseudomonas). This study reveals the role of frequency modulation in AC-driven bioelectrodes for enhanced RAP mineralization, offering a novel and sustainable approach for treating RAP-bearing wastewater.

Efficient and Selective Electrochemical Nitrate Reduction to N2 Using a Flow-Through Zero-Gap Electrochemical Reactor with a Reconstructed Cu(OH)2 Cathode: Insights into the Importance of Inter-Electrode Distance

Electrochemically converting nitrate, a widely distributed nitrogen contaminant, into harmless N2 is a feasible and environmentally friendly route to close the anthropogenic nitrogen-based cycle. However, it is currently hindered by sluggish kinetics and low N2 selectivity, as well as scarce attention to reactor configuration. Here, we report a flow-through zero-gap electrochemical reactor that shows a high performance of nitrate reduction with 100% conversion and 80.36% selectivity of desired N2 in the chlorine-free system at 100 mg-N·L-1 NO3- while maintaining a rapid reduction kinetics of 0.07676 min-1. More importantly, the mass transport and current utilization efficiency are significantly improved by shortening the inter-electrode distance, especially in the zero-gap electrocatalytic system where the current efficiency reached 50.15% at 5 mA·cm-2. Detailed characterizations demonstrated that during the electroreduction process, partial Cu(OH)2 on the cathode surface was reconstructed into stable Cu/Cu2O as the active phase for efficient nitrate reduction. In situ characterizations revealed that the highly selective *NO to *N conversion and the N-N coupling step played crucial roles during the selective reduction of NO3- to N2 in the zero-gap electrochemical system. In addition, theoretical calculations demonstrated that improving the key intermediate *N coverage could effectively facilitate the N-N coupling step, thereby promoting N2 selectivity. Moreover, the environmental and economic benefits and long-term stability shown by the treatment of real nitrate-containing wastewater make our proposed electrocatalytic system more attractive for practical applications.

Environmental pollution removal using electrostimulation of microorganisms by alternative current

The entrance of some toxic and hazardous chemical agents such as antibiotics, pesticides, and herbicides into the environment can cause various problems to human health and the environment. In recent years, researchers have considered the use of electrostimulation in the processes of microbial metabolism and biological systems for the treatment of pollutants in the environment. Although several electrostimulation reports have been presented for pollutant removal, little attention has been paid to alternative current (AC) biostimulation. This study presents a systematic review of microbial electrostimulation using bioelectrochemical systems supplied with AC. The utilization of alternating current bioelectrochemical systems (ACBESs) has some advantages such as the provide of appropriate active biofilms in the electrodes due to the cyclical nature of the current and energy transfer in an appropriate manner on the electrode surfaces. Moreover, the ACBESs can reduce hydraulic time (HRT) under optimal conditions and reduce the cost of converting electricity using AC. In microbial electrostimulation, amplitude (AMPL), waveform, C/N, and current have a significant effect on increasing the removal efficiency of the pollutants. The obtained results of the meta-analysis illustrated that various pollutants such as phenol, antibiotics, and nitrate have been removed in an acceptable range of 96% using the ACBESs. Therefore, microbial electrostimulation using AC is a promising technology for the decomposition and removal of various pollutants. Moreover, the ACBESs could provide new opportunities for promoting various bioelectrochemical systems (BESs) for the production of hydrogen or methane.

Environmental iodine as a natural iodine intake in humans and environmental pollution index: a scientometric and updated mini review

Although almost a third of the world's population is exposed to iodine deficiency (ID), and supplementation programs such as enriching table salt have been carried out or are being carried out at the global and national level, in many regions of the world, people are facing an increase in iodine intake, which is mainly due to the presence of large amounts of iodine in water, soil, agricultural products, or high consumption of seafood. Published articles were indexed in the Scopus database (from 2000 to 1 April 2023) were reviewed and analyzed by VOSviewer software. The results showed the growing interest of researchers over the last 20 years in environmental iodine intake. The results of this study can have a significant impact on the planning and policy-making of relevant officials and communities to supply the needed iodine.

Enhanced TC degradation by persulfate activation with carbon-coated CuFe2O4: The radical and non-radical co-dominant mechanism, DFT calculations and toxicity evaluation

Facing the constraints of critical agglomeration and poor reusability of CuFe2O4 in catalytic applications, the feasibility of synthesizing a composite catalyst using carbon coating technology for efficient TC removal with enhanced PDS activity was investigated. The composite catalyst (CuFe2O4@C) can stimulate both radical (SO4•- and HO•) and non-radical (1O2) pathways to dominate the catalytic reaction for removing 95.7% of the TC in 60 min. Meanwhile, the defective structure of the external carbon layer protected the internal CuFe2O4 from excessive oxidation, allowing the CuFe2O4@C to maintain over 90% TC removal after 5 cycles with less interference from inorganic anions, demonstrating significant catalytic performance and satisfactory reusability. Finally, the DFT calculations and TEST evaluation were performed to discuss the structural properties of TC and its toxicity assessment during the whole degradation process, while three possible degradation pathways were proposed. Significantly, the carbon-coated composite catalysts of potential universal applicability for multi-pathway PDS activation offered an attractive new strategy for the effective degradation of antibiotic wastewater.

Autotrophic denitrification based on sulfur-iron minerals: advanced wastewater treatment technology with simultaneous nitrogen and phosphorus removal

Autotrophic denitrification technology has many advantages, including no external carbon source addition, low sludge production, high operating cost efficiency, prevention of secondary sewage pollution, and stable treatment efficiency. At present, the main research on autotrophic denitrification electron donors mainly includes sulfur, iron, and hydrogen. In these autotrophic denitrification systems, pyrite has received attention due to its advantages of easy availability of raw materials, low cost, and pH stability. When pyrite is used as a substrate for autotropic denitrification, sulfide (S2-) and ferrous ion (Fe2+) in the substrate will provide electrons to convert nitrate (NO3-) in sewage first to nitrite (NO2-), then to nitrogen (N2), and finally to discharge the system. At the same time, sulfide (S2-) loses electrons to sulfate (SO42-) and ferrous ion (Fe2+) loses electrons to ferric iron (Fe3+). Phosphates (PO43-) in wastewater are chemically combined with ferric iron (Fe3+) to form ferric phosphate (FePO4) precipitate. This paper aims to provide a detailed and comprehensive overview of the dynamic changes of nitrogen (N), phosphorus (P), and other substances in the process of sulfur autotrophic denitrification using iron sulfide, and to summarize the factors that affect wastewater treatment in the system. This work will provide a relevant research direction and theoretical basis for the field of sulfur autotrophic denitrification, especially for the related experiments of the reaction conversion of various substances in the system.

Examining current trends and future outlook of bio-electrochemical systems (BES) for nutrient conversion and recovery: an overview

Nutrient-rich waste streams from domestic and industrial sources and the increasing application of synthetic fertilizers have resulted in a huge-scale influx of reactive nitrogen and phosphorus in the environment. The higher concentrations of these pollutants induce eutrophication and foster degradation of aquatic biodiversity. Besides, phosphorus being non-renewable resource is under the risk of rapid depletion. Hence, recovery and reuse of the phosphorus and nitrogen are necessary. Over the years, nutrient recovery, low-carbon energy, and sustainable bioremediation of wastewater have received significant interest. The conventional wastewater treatment technologies have higher energy demand and nutrient removal entails a major cost in the treatment process. For these issues, bio-electrochemical system (BES) has been considered as sustainable and environment friendly wastewater treatment technologies that utilize the energy contained in the wastewater so as to recovery nutrients and purify wastewater. Therefore, this article comprehensively focuses and critically analyzes the potential sources of nutrients, working mechanism of BES, and different nutrient recovery strategies to unlock the upscaling opportunities. Also, economic analysis was done to understand the technical feasibility and potential market value of recovered nutrients. Hence, this review article will be useful in establishing waste management policies and framework along with development of advanced configurations with major emphasis on nutrient recovery rather than removal from the waste stream.

Tetracycline hydrochloride degradation by activation of peroxymonosulfate with lanthanum copper Ruddlesden-Popper perovskite oxide: Performance and mechanism

ABO₃-type perovskite oxides have been regarded as a kind of potential catalyst for peroxymonosulfate (PMS) activation. But some limitations such as specific pH conditions and coexisting ion interference restrict its practical application. Herein, a lanthanum copper Ruddlesden-Popper perovskite oxide (La₂CuO₄) was successfully synthesized through the sol-gel process and applied in the activation of PMS. And for the first time the La₂CuO₄/PMS system was used for tetracycline hydrochloride (TC-HCl) degradation. Results showed that La₂CuO₄ was a potential PMS activation catalyst in the removal of antibiotics. At optimized condition (0.2 g/L catalysts, 1 mM PMS, pH₀ 6.9), 96.05% of TC-HCl was removed in 30 min. In experiments of debugging control conditions, over a wide pH range of 3-11, more than 90% of TC-HCl can be removed. In the natural water treatment process, TC-HCl removal rates of about 84.2% and 70.3% were obtained in tap water and River water, respectively. According to the reusability and stability tests and the results of FTIR and XPS analysis, La₂CuO₄ had high structural and chemical stability. Electron paramagnetic resonance (EPR) suggested that the active species including ·OH, SO₄^-· and ¹O₂ were detected in degradation reaction. Finally, reasonable reaction mechanisms and possible degradation pathways of TC-HCl were proposed. These results indicate that La₂CuO₄ can act as a potential catalyst for PMS activation to degrade TC-HCl in water.

Role of bio-electrochemical technology for enzyme activity stimulation in high-consumption pharmaceuticals biodegradation

Active pharmaceutical ingredients (APIs) and their intermediate residues have recently been considered a serious concern. Among technologies, bio-electrochemical technologies (BETs) have stimulated the production of bio-electrical energy. This review aims to examine the benefit and mechanism of BETs on the degradation of high-consumption pharmaceutical compounds, including antibiotic, anti-inflammatory, and analgesic drugs, and the stimulation of enzymes induced in a bioreactor. Moreover, intermediates and the proposed pathways of pharmaceutical compound biodegradation in BETs are to be explained in this review. According to studies performed exclusively, the benefit of BETs is using bio-electroactive microbes to mineralize recalcitrant pharmaceutical contaminants by promoting enzyme activity and energy. Since BETs use the electron transfer chain between bio-anode/-cathode and pharmaceuticals, the enzyme activity is essential in the oxidation and reduction of phenolic rings of drugs and the ineffective detoxification of effluent from the treatment plant. This study is suggested a vital and influential role of BETs in mineralizing and enzyme induction in bioreactors. Eventually, a content of future developments or outlooks of BETs are propounded to improve the pharmaceutical industries' wastewater problems.

Investigation on the improved electrochemical and bio-electrochemical treatment processes of soilless cultivation drainage (SCD)

The soilless crop cultivation under cover generates wastewater called soilless cultivation drainage (SCD), being a nutrient-rich overflow. The average concentration of phosphorus- and nitrogen-based pollutants from soilless tomato cultivation usually ranges from 35.4 to 104.0 mg P/L and from 270.0 to 614.9 mg N/L, respectively. In bio-electrochemical reactors, nitrogen and phosphorus are removed via biological denitrification, electrochemical nitrate reduction, bio-electrochemical reduction, and electrocoagulation. The novelty of this study is due to the use of alternating current (AC), which can both mitigate the corrosion on the anode and solve the issue of insoluble oxide build-up on the cathode. Additionally, and crucially, it promotes bacterial growth and activity. The aim of the present study was to determine (1) the effectiveness of soilless cultivation drainage treatment methods that employ biological and electrochemical processes, with consideration given to (2) the quantity and quality of the produced sludge as a potential nutrient-rich product. The bio-electrochemical reactor proved more effective than the electrochemical one and ensured a high TP and TN removal efficiency exceeding 97% and 66%, respectively. The resulting sludge was rich in such elements as calcium, potassium, carbon, phosphorus, and nitrogen, and as such may serve as a viable alternative to conventional mineral fertilizers.

Responses of microbial communities and their interactions to ibuprofen in a bio-electrochemical system

Ibuprofen has caused great concerns due to their potential environmental risks. However, their removal efficiency and their effects on microbial interactions in bio-electrochemical system remain unclear. To address these issues, a lab-scale bio-electrochemical reactor integrated with sulfur/iron-mediated autotrophic denitrification (BER-S/IAD) system exposing to 1000 μg L^-1 ibuprofen was operated for about two months. Results revealed that the BER-S/IAD system obtained efficient simultaneous denitrification (98.93%) and phosphorus (82.67%) removal, as well as an excellent ibuprofen removal performance (96.98%). Ibuprofen had no significant impacts on the nitrate (NO₃^--N) removal and the ammonia (NH₄⁺-N) accumulation, but decreased the total nitrogen (TN) and total phosphorus (TP) removal efficiencies. MiSeq sequencing analysis revealed that ibuprofen significantly (P < 0.05) decreased the microbial community diversity and changed their overall structure. Some bacteria related to denitrification and phosphorus removal, such as Pseudomonas and Thiobacillus, decreased significantly (P < 0.05). Moreover, molecular ecological network (MEN) analysis revealed that ibuprofen decreased the network's size and complexity, and enhanced the negative correlations of Proteobacteria and Firmicutes. Besides, ibuprofen decreased the links of some keystone bacteria related to denitrification and phosphorus removal. This research could provide a new dimension for our comprehending of the responses of microbial communities and their interactions to ibuprofen in bio-electrochemical system.

A novel UASB-MFC dual sensors system for wastewater treatment: On-line sensor recovery and electrode cleaning in the long-term operation

In this research, the UASB-MFC dual sensors system was established and treatment the brewery wastewater. The COD removal rate attain about 90% and the NH₄⁺-N concentration less than 15 mg/L, MFCs has a voltage range of 0.34-0.42 V. Meanwhile, as the biosensor for coupling system, MFCs can be used to make simultaneous monitor COD and TVFA. The potential distribution can in-situ accelerate the reattachment of micro-organisms, which shorten the recovery time to 55% of the original. The long-term performance of MFCs were tested by electrochemical methods and found that the degradation of biosensors was mainly caused by the precipitation of Ca²⁺ and Mg²⁺ on the cathode surface and affected by concentration. More importantly, cleaning the electrode by an self-enhanced method without external assistance ECS (Electrodes Connection Switching) can improve the MFCs performance to 83.2 %-84.6%. Dual sensors system in UASB gives a novel possibility for UASB-MFC sensor self-sustaining in a long-term.

Effects of Low Frequency-Low Voltage Alternating Electric Current on Apoptosis Progression in Bioelectrical Reactor Biofilm

Bioelectrochemical systems have undergone several modifications to promote the enzymes or pathways used to reduce the energy required for microbial metabolism. Changes in dominant bacteria, population, and growth rates occur when an electric current is applied intermittently. Applying electricity to bioelectrical reactor (BER) biofilms can either stimulate cells or lead to cell death; therefore, determining the applied voltage range that leads to viable and stimulated bacteria is crucial. We investigated the progression of apoptosis induced by a low frequency-low voltage alternating electric current (AC) in a BER biofilm and found that biofilms on carbon cloth (CC) and stainless steel (SS) 304 electrodes had pH_zpc values of 8.67. The pH_zpc of the biofilms increased by two compared to that of the inoculant bacteria mass. Furthermore, the Henderson–Hasselbalch equation reveals that the compositions of cell walls of the biofilms that formed on the CC and SS304 electrodes are very similar. In contrast, the CC and SS304 biofilms differ from the inoculant biomass without the influence of an AC field; this indicates that there are differences in the compositions of the cell walls in the present bacteria. Fourier transform infrared spectroscopy was used to compare spectra of the biofilms with that of the inoculation mass, and there were differences in shape and absorbance intensity, indicating variability in the composition, and quantity of each individual biofilm component. In addition, the dehydrogenase activity (DHA) content varied under different applied voltages; the highest DHA was obtained at 8 Vpp. A flow cytometry analysis showed a relatively low number of apoptotic cells (10.93 ± 5.19%) for the AC amplitudes studied. Thus, a low voltage-low frequency AC likely induces significant changes in bacterial metabolic activity but causes no significant change in their viability.

Metabolic activity and pathway study of aspirin biodegradation using a microbial electrochemical system supplied by an alternating current

The main aim of this study is to investigate the biodegradation of highly concentrated aspirin as an emerging pollutant from aqueous solution using an alternating current microbial electrochemical system. A single-chamber Plexiglas cylindrical reactor equipped with stainless steel mesh electrodes (18 cm height × 16 cm diameter) was applied as the bioreactor in batch mode with an effective volume of 5 L, height of 20 cm, and the diameter about 20 cm by AMPL = 2 V_pp, OFST = 0.1 V, waveform = sinusoidal, frequency = 10 Hz, and pH = 7. The process parameters including initial concentration (100-400 mg L^-1), chemical oxygen demand (COD), activity of enzymes, biokinetic and pathway studies at very low voltage and very low frequency alternating current were investigated. The specific biodegradation rate of aspirin was calculated based on Michaelis-Menten model. The complete aspirin removal efficiency and the maximum enzymatic activity were achieved at 250 mg L^-1 aspirin, voltage of 2 V_pp and applied current = 3 mA during 6 h. The bioassay of aspirin concentrations in biofilm of the system using flow cytometry analysis resulted in the live and necrotic cells shares of 96.2%, and 0.44%, respectively. Moreover, the LC and GC-MS analysis showed low molecular weight acids such as oxalic and acetic acid at 6 h time under the optimal conditions using very low applied voltage and frequency. Obtaining low reaction time for degradation, high potential in biodegradation, oxidation and mineralization ability were the novelty of treatment system with high concentration aspirin in the study.

Effect of low-intensity direct current electric field on microbial nitrate removal in coal pyrolysis wastewater with low COD to nitrogen ratio

The coupling of bioelectrochemical system with the biological denitrification process (R1) was constructed for nitrate removal in coal pyrolysis wastewater (CPW) and the effect of low-intensity direct current electric field was investigated. Compared with control reactor (R2), the total nitrogen (TN) removal efficiency in R1 at the optimized voltage of 0.9 V was 94.20 ± 2.14%, which was 14.42% higher than that in R2. The biofilm on the cathode of R1 enhanced the nitrate reducing, however, nitrite was only reduced by bacteria in suspended activated sludge, which was confirmed by cyclic voltammetry measurement (CV). Microbial community network analysis revealed that exoelectrogenic bacteria of Pseudomonas was enriched on the anode of R1, and the "small world", including Zoogloea, Pseudomonas and Arenimonas, was established under the stimulation of voltage. Therefore, Pseudomonas transferred electron to anode, and Arenimonas could utilize electron from anode to reduce nitrate, which enhanced TN removal in R1.

Effect of isoelectric point on cheese whey wastewater treatment using a microbial electrochemical system

In this study, a microbial electrochemical system (MES) was employed to investigate the effect of isoelectric point (IEP) on cheese whey wastewater treatment. The experiments were carried out in a bioreactor equipped with a semicircular carbon cloth and stainless steel electrodes as anode and cathode, respectively. The effects of IEP, whey protein concentration, electrical current, and time were studied. The IEP of the whey protein was determined at pH 5.9. The optimum electrical current was obtained at 6 mA for synthetic cheese whey wastewater. The results of rotary exponential doping showed that the third structure of proteins chenges to the second structure at the IEP. The highest protein removal (98%) was obtained at pH 6. The results showed that 76%, 83%, and 98% protein removal were achieved at 2, 4, and 8 h, respectively.

Efficient methane production from petrochemical wastewater in a single membrane-less microbial electrolysis cell: the effect of the operational parameters in batch and continuous mode on bioenergy recovery

The main objective of this study is to evaluate the treatment and simultaneous production of methane from low-strength petrochemical wastewater by single membrane-less microbial electrolysis cells. To achieve this objective, the influence of variables such as applied voltage, operation mode, and hydraulic retention time (HRT) on the performance of the MEC system was investigated over a period of 110 days. According to the obtained results, the maximum COD removal efficiency in the batch mode was higher than which in the continuous mode (i.e. 85.9% vs 75.3%). However, the maximum methane production in the continuous mode was almost 1.6 times higher than which in the batch mode. The results show, COD removal, methane content, and methane production in both operation modes, were enhanced as applied voltage increased from 0.6 to 0.8-1 V. The proportion of methane, methane production rate, and COD removal were increased as HRT decreased from 72 to 48 h, while these values were decreased as the HRT decreased from 48 to 12 h. In continues mode, the energy efficiency had a range of 94.7% to 97.9% with an average of 96.6% in phase III, which almost recovered all of the electrical energy input into the system. These results suggest that single membrane-less microbial electrolysis cell is a promising process in order to the treatment of low-strength wastewater and methane production.

Effect of alternating electrical current on denitrifying bacteria in a microbial electrochemical system: biofilm viability and ATP assessment

The present study considers the impact of the alternating electric current on the viability and biological activity of denitrifying bacteria in a microbial electrochemical system (MES). The bio-stimulation using low-frequency low-voltage alternating current (AC) was studied in terms of the adenosine triphosphate (ATP) level of bacteria, viability, morphological characteristics, cell size, and complexity. Apoptosis assays by flow cytometry revealed that 81-95% of the cells were non-apoptotic, and cell membrane damage occurred < 18%. The applied AC could affect the bacterial metabolic activity and ATP content in the denitrifying bacteria depending on characteristics of the alternating electric current. Scanning electron microscopy (SEM) analysis of cell morphology illustrated low cell deformations under AC stimulation. The obtained results revealed that the applied alternating electrical current could increase the metabolic activity of denitrifying bacteria, leading to a better denitrification. Graphical abstract ᅟ.