Characterization of protein release from photocrosslinkable hyaluronic acid-polyethylene glycol hydrogel tissue engineering scaffolds

Structurally decoupled hyaluronic acid hydrogels for studying matrix metalloproteinase-mediated invasion of metastatic breast cancer cells

In recent years, polymeric hydrogels have been employed to investigate cancer cell-extracellular matrix (ECM) interactions in vitro. In the context of breast cancer, cancer cells are known to degrade the ECM using matrix-metalloproteinases (MMPs) to support invasion resulting in disease progression. Polymeric hydrogels incorporating MMP-cleavable peptides have been employed to study cancer cell invasion, however, the approaches employed to incorporate these peptides often change other hydrogel properties. This underscores the need for decoupling hydrogel properties while incorporating MMP-cleavable peptides. Herein, we report structurally decoupled hyaluronic acid (HA) hydrogels formulated using varying ratios of a biologically sensitive MMP-cleavable peptide and an insensitive counterpart (Dithiothreitol (DTT) or polyethylene glycol dithiol (PEGDT)) to study MMP-mediated metastatic breast cancer cell invasion. Rheological, swelling ratio, estimated mesh size, and permeability measurements showed similar mechanical and physical properties for hydrogels crosslinked with different DTT (or PEGDT)/MMP ratios. However, their degradation rate in the presence of collagenase correlated with the ratio of MMP-cleavable peptide. Encapsulated metastatic breast cancer spheroids in HA hydrogels with MMP sensitivity exhibited increased invasiveness compared to those without MMP sensitivity after 14 days of culture. Overall, such structurally decoupled HA hydrogels provide a platform to study MMP-mediated breast cancer cell invasion in vitro.

Determining Rates of Molecular Secretion from Supernatant Concentration Measurements in a 3D-Bioprinted Human Liver Tissue Model

The secretion rate of albumin is a key indicator of function in liver tissue models used for hepatotoxicity and pharmacokinetic testing. However, it is not generally clear how to determine molecular secretion rates from measurements of the molecular concentration in supernatant media. Here, we develop computational and analytical models of molecular transport in an experimental system that enable determination of albumin secretion rates based on measurements of albumin concentration in supernatant media. The experimental system is a 3D-bioprinted human liver tissue construct embedded in a 3D culture environment made from packed microgel particles swollen in liquid growth media. The mathematical models reveal that the range of albumin synthesis rates necessary to match experimentally measured albumin concentrations corresponds to reaction-limited conditions, where a steady state of albumin spatial distribution is rapidly reached between media exchanges. Our results show that temporally resolved synthesis rates can be inferred from serial concentration measurements of collected supernatant media. This link is critical to confidently assessing in vitro tissue performance in applications where critical quality attributes must be quantified, like in drug development and screening.

In silico evaluation of corneal patch eluting anti-VEGF agents concept

This study introduces a novel approach utilizing a temporary drug-eluting hydrogel corneal patch to prevent neovascularization, alongside a numerical predictive tool for assessing the release and transport kinetics of bevacizumab (BVZ) after the keratoplasty. A key focus was investigating the impact of tear film clearance on the release kinetics and drug transport from the designed corneal patch. The proposed tear drug clearance model incorporates the physiological mechanism of lacrimal flow (tear turnover), distinguishing itself from previous models. Validation against experimental data confirms the model's robustness, despite limitations such as a 2D axisymmetrical framework and omission of blink frequency and saccadic eye movements potential effects. Analysis highlights the significant influence of lacrimal flow on ocular drug transport, with the corneal patch extending BVZ residence time compared to topical administration. This research sets the stage for exploring multi-layer drug-eluting corneal patches as a promising therapeutic strategy in ocular health.

Biomaterials for Drug Delivery and Human Applications

Biomaterials embody a groundbreaking paradigm shift in the field of drug delivery and human applications. Their versatility and adaptability have not only enriched therapeutic outcomes but also significantly reduced the burden of adverse effects. This work serves as a comprehensive overview of biomaterials, with a particular emphasis on their pivotal role in drug delivery, classifying them in terms of their biobased, biodegradable, and biocompatible nature, and highlighting their characteristics and advantages. The examination also delves into the extensive array of applications for biomaterials in drug delivery, encompassing diverse medical fields such as cancer therapy, cardiovascular diseases, neurological disorders, and vaccination. This work also explores the actual challenges within this domain, including potential toxicity and the complexity of manufacturing processes. These challenges emphasize the necessity for thorough research and the continuous development of regulatory frameworks. The second aim of this review is to navigate through the compelling terrain of recent advances and prospects in biomaterials, envisioning a healthcare landscape where they empower precise, targeted, and personalized drug delivery. The potential for biomaterials to transform healthcare is staggering, as they promise treatments tailored to individual patient needs, offering hope for improved therapeutic efficacy, fewer side effects, and a brighter future for medical practice.

Development of Thiol-Ene Reaction-Based HA Hydrogel with Sustained Release of EGF for Enhanced Skin Wound Healing

This study develops a novel drug delivery system using a hyaluronic acid (HA) hydrogel for controlled release of epidermal growth factor (EGF) to enhance skin wound healing. Conventional hydrogel-based methods suffer from a burst release and limited drug delivery times. To address this, we employ bioconjugation to introduce an acrylate group to EGF, enabling chemical bonding to the HA hydrogel matrix through thiol-ene cross-linking. This approach results in sustained-release delivery of EGF based on the degradation rate of the HA matrix, overcoming diffusion-based limitations. We confirm the introduction of the acrylate group using matrix-assisted laser desorption ionization-time-of-flight (MALDI-TOF) mass spectrometry. We evaluated the hydrogel morphology and rheological properties following binding of acrylate-conjugated EGF to the HA matrix. Assessment of the EGF release profile demonstrates delayed release compared to unconjugated EGF. We evaluate the impact on cells through cell proliferation and scratch assays, indicating the system's efficacy. In a rat wound healing model, the sustained release of EGF from the hydrogel system promotes appropriate tissue healing and restores it to a normal state. These findings suggest that this practical drug delivery system, involving the modification of growth factors or drugs to chemically bind healing factors to hydrogels, can achieve long-lasting effects.

Advancing drug delivery to articular cartilage: From single to multiple strategies

Articular cartilage (AC) injuries often lead to cartilage degeneration and may ultimately result in osteoarthritis (OA) due to the limited self-repair ability. To date, numerous intra-articular delivery systems carrying various therapeutic agents have been developed to improve therapeutic localization and retention, optimize controlled drug release profiles and target different pathological processes. Due to the complex and multifactorial characteristics of cartilage injury pathology and heterogeneity of the cartilage structure deposited within a dense matrix, delivery systems loaded with a single therapeutic agent are hindered from reaching multiple targets in a spatiotemporal matched manner and thus fail to mimic the natural processes of biosynthesis, compromising the goal of full cartilage regeneration. Emerging evidence highlights the importance of sequential delivery strategies targeting multiple pathological processes. In this review, we first summarize the current status and progress achieved in single-drug delivery strategies for the treatment of AC diseases. Subsequently, we focus mainly on advances in multiple drug delivery applications, including sequential release formulations targeting various pathological processes, synergistic targeting of the same pathological process, the spatial distribution in multiple tissues, and heterogeneous regeneration. We hope that this review will inspire the rational design of intra-articular drug delivery systems (DDSs) in the future.

Moderate-Affinity Affibodies Modulate the Delivery and Bioactivity of Bone Morphogenetic Protein-2

Uncontrolled bone morphogenetic protein-2 (BMP-2) release can lead to off-target bone growth and other adverse events. To tackle this challenge, yeast surface display is used to identify unique BMP-2-specific protein binders known as affibodies that bind to BMP-2 with different affinities. Biolayer interferometry reveals an equilibrium dissociation constant of 10.7 nm for the interaction between BMP-2 and high-affinity affibody and 34.8 nm for the interaction between BMP-2 and the low-affinity affibody. The low-affinity affibody-BMP-2 interaction also exhibits an off-rate constant that is an order of magnitude higher. Computational modeling of affibody-BMP-2 binding predicts that the high- and low-affinity affibodies bind to two distinct sites on BMP-2 that function as different cell-receptor binding sites. BMP-2 binding to affibodies reduces expression of the osteogenic marker alkaline phosphatase (ALP) in C2C12 myoblasts. Affibody-conjugated polyethylene glycol-maleimide hydrogels increase uptake of BMP-2 compared to affibody-free hydrogels, and high-affinity hydrogels exhibit lower BMP-2 release into serum compared to low-affinity hydrogels and affibody-free hydrogels over four weeks. Loading BMP-2 into affibody-conjugated hydrogels prolongs ALP activity of C2C12 myoblasts compared to soluble BMP-2. This work demonstrates that affibodies with different affinities can modulate BMP-2 delivery and activity, creating a promising approach for controlling BMP-2 delivery in clinical applications.

Concentration-dependent diffusion of unlabeled protein within an in vitro hyaluronic acid matrix

Diffusion and movement of subcutaneously injected biologics and high-concentration immunoglobulin G (IgG) therapeutics away from the injection site and through the subcutaneous (SC) tissue may be concentration dependent. This possibility was confirmed by in situ measurement of diffusion coefficients of unlabeled bovine IgG in phosphate-buffered saline within an in vitro hyaluronic acid matrix that represents the SC electrostatic environment. Diffusion decreased from 2.67 to 0.05 × 10^-7  cm² /s when IgG concentration increased from 25 to 73 mg/mL. The results demonstrated that in situ detection of unlabeled proteins within an in vitro SC environment provides another useful tool for the preclinical characterization of injectable biologics.

A Systematic Review on Polyester Scaffolds in Dental Three-dimensional Cell Printing: Transferring Art from the Laboratories to the Clinics

Objective

The purpose of this systematic review is to describe developments in three-dimensional (3D) cell printing in the formation of dental pulp tissue using polyester as a scaffold to revitalize the damaged dental pulp tissue.

Materials and methods

A literature search for all the data published in PubMed and Google Scholar from January 2000 to April 2022 was conducted. Articles with the keywords 3D cell printing, scaffolds, polyester, dental pulp, and dentistry were used. Inclusion criteria consisted of any publication in electronic or print media directly studying or commenting on the use of polyester scaffolds in 3D cell printing technology in the regeneration of dental pulp. A total of 528 articles were selected, of which 27 duplicates and 286 irrelevant articles were discarded. A total of 215 articles were finally included in the systematic review.

Result and conclusion

For dental pulp regeneration, several scaffolds have been discovered to be appealing. Polylactic acid (PLA), polyglycolic acid (PGA), and their copolymers are nontoxic and biocompatible synthetic polyesters that degrade by hydrolysis and have received Food and Drug Administration (FDA) approval for a variety of applications. This review paper is intended to spark new ideas for using a certain scaffold in a specific regenerative approach to produce the desired pulp-dentin complex.

High porosity PEG-based hydrogel foams with self-tuning moisture balance as chronic wound dressings

A major challenge in chronic wound treatment is maintaining an appropriate wound moisture balance throughout the healing process. Wound dehydration hinders wound healing due to impeded molecule transport and cell migration with associated tissue necrosis. In contrast, wounds that produce excess fluid contain high levels of reactive oxygen species and matrix metalloproteases that impede cell recruitment, extracellular matrix reconstruction, and angiogenesis. Dressings are currently selected based on the relative amount of wound exudate with no universal dressing available that can maintain appropriate wound moisture balance to enhance healing. This work aimed to develop a high porosity poly(ethylene glycol) diacrylate hydrogel foam that can both rapidly remove exudate and provide self-tuning moisture control to prevent wound dehydration. A custom foaming device was used to vary hydrogel foam porosity from 25% to 75% by adjusting the initial air-to-solution volume ratio. Hydrogel foams demonstrated substantial improvements in water uptake volume and rate as compared to bulk hydrogels while maintaining similar hydration benefits with slow dehydration rates. The hydrogel foam with the highest porosity (~75%) demonstrated the greatest water uptake and rate, which outperformed commercial dressing products, Curafoam® and Silvercel®, in water absorption, moisture retention, and exudate management. Investigation of the water vapor transmission rates of each dressing at varied hydration levels was characterized and demonstrated the dynamic moisture-controlling capability of the hydrogel foam dressing. Overall, the self-tuning moisture control of this hydrogel foam dressing holds great promise to improve healing outcomes for both dry and exudative chronic wounds.

Ultrasensitive and Highly Stretchable Multiple-Crosslinked Ionic Hydrogel Sensors with Long-Term Stability

Flexible hydrogels are receiving significant attention for their application in wearable sensors. However, most hydrogel materials exhibit weak and one-time adhesion, low sensitivity, ice crystallization, water evaporation, and poor self-recovery, thereby limiting their application as sensors. These issues are only partly addressed in previous studies. Herein, a multiple-crosslinked poly(2-(methacryloyloxy)ethyl)dimethyl-(3-sulfopropyl)ammonium hydroxide-co-acrylamide) (P(SBMA-co-AAm)) multifunctional hydrogel is prepared via a one-pot synthesis method to overcome the aforementioned limitations. Specifically, ions, glycerol, and 2-(methacryloyloxy)ethyl)dimethyl-(3-sulfopropyl)ammonium hydroxide are incorporated to reduce the freezing point and improve the moisture retention ability. The proposed hydrogel is superior to existing hydrogels because it exhibits good stretchability (a strain of 2900%), self-healing properties, and transparency through effective energy dissipation in its dynamic crosslinked network. Further, 2-(methacryloyloxy)ethyl)dimethyl-(3-sulfopropyl)ammonium hydroxide as a zwitterion monomer results in an excellent gauge factor of 43.4 at strains of 1300-1600% by improving the ion transportability and achieving a strong adhesion of 20.9 kPa owing to the dipole-dipole moment. The proposed hydrogel is promising for next-generation biomedical applications, such as soft robots, and health monitoring.

Supramolecular Host-Guest Hydrogel Based on γ-Cyclodextrin and Carboxybenzyl Viologen Showing Reversible Photochromism and Photomodulable Fluorescence

Much effort has been devoted to the development of supramolecular hydrogels due to their broad applications and conveniently controllable properties. Here, we demonstrate a novel supramolecular host-guest hydrogel, which is constructed by the host γ-CD complexed with the guest 1-(4-carboxybenzyl)-4,4'-bipyridinium chloride (1⁺·Cl^-) through the π···π interaction, hydrogen bonding, and host-guest interactions. The supramolecular hydrogel [1⁺@γ-CD]_n exhibits reversible electron transfer photochromic behavior and photomodulable fluorescence. The excellent photochromic and fluorescence properties support the practical utility of the supramolecular hydrogel as a visual display and anti-counterfeiting material.

Hyaluronic acid hydrolysis using vacuum ultraviolet TiO2 photocatalysis combined with an oxygen nanobubble system

Advanced technologies for producing high-quality low molecular weight hyaluronic acid (LMW-HA) are required from the perspective of cost-efficiency and biosafety. Here, we report a new LMW-HA production system from high molecular weight HA (HMW-HA) using vacuum ultraviolet TiO₂ photocatalysis with an oxygen nanobubble system (VUV-TP-NB). The VUV-TP-NB treatment for 3 h resulted in a satisfactory LMW-HA (approximately 50 kDa measured by GPC) yield with a low endotoxin level. Further, there were no inherent structural changes in the LMW-HA during the oxidative degradation process. Compared with conventional acid and enzyme hydrolysis methods, VUV-TP-NB showed similar degradation degree with viscosity though reduced process time by at least 8-fold. In terms of endotoxin and antioxidant effects, degradation using VUV-TP-NB demonstrated the lowest endotoxin level (0.21 EU/mL) and highest radical scavenging activity. This nanobubble-based photocatalysis system can thus be used to produce biosafe LMW-HA cost-effectively for food, medical, and cosmetics applications.

Hyaluronic Acid and Radiofrequency in Patients with Urogenital Atrophy and Vaginal Laxity

Vaginal laxity (VL) and genitourinary syndrome of menopause (GSM), as well as aesthetic changes in the vulvar skin, often occur together and cause physical, psychological, and functional problems for women and their partners. The current study evaluated the efficacy of a nonsurgical radiofrequency device (RF) procedure combined with hyaluronic acid (HA) injection into the skin of the labia majora on clinical, histological, and aesthetic levels. Twenty women with GSM and VL, aged between 36 and 72 (mean age 53.4), were treated with bipolar RF SECTUM, vaginal and vulvar application, as well as with a hyaluronic acid (HA) injection into the skin of the labia majora. The Vaginal Laxity Questionnaire (VLQ), Vaginal Health Index (VHI), and Female Sexual Function Index (FSFI) were used to examine the clinical effects of the operations. The Global Aesthetic Improvement Scale was utilized to measure patient satisfaction. On a histochemical level, the concentrations of elastin and collagen in the vaginal wall and vulvar skin were examined. Results: There was significantly higher patient satisfaction and a considerable clinical improvement across all areas of analysis. On the histochemical level, elastin and collagen fiber concentration increased after the treatment protocol both in the vulvar skin and in the vaginal wall: elastin in the vaginal wall, 11.4%, and in the vulvar skin, 61%; collagen in the vaginal wall, 26%, and in the vulvar skin, 27%. The current study demonstrated the efficacy and safety of this nonsurgical RF procedure combined with a hyaluronic acid (HA) injection into the skin of the labia majora on clinical, histochemical, and aesthetic levels.

Three-Dimensional Digital Light-Processing Bioprinting Using Silk Fibroin-Based Bio-Ink: Recent Advancements in Biomedical Applications

Three-dimensional (3D) bioprinting has been developed as a viable method for fabricating functional tissues and organs by precisely spatially arranging biomaterials, cells, and biochemical components in a layer-by-layer fashion. Among the various bioprinting strategies, digital light-processing (DLP) printing has gained enormous attention due to its applications in tissue engineering and biomedical fields. It allows for high spatial resolution and the rapid printing of complex structures. Although bio-ink is a critical aspect of 3D bioprinting, only a few bio-inks have been used for DLP bioprinting in contrast to the number of bio-inks employed for other bioprinters. Recently, silk fibroin (SF), as a natural bio-ink material used for DLP 3D bioprinting, has gained extensive attention with respect to biomedical applications due to its biocompatibility and mechanical properties. This review introduces DLP-based 3D bioprinting, its related technology, and the fabrication process of silk fibroin-based bio-ink. Then, we summarize the applications of DLP 3D bioprinting based on SF-based bio-ink in the tissue engineering and biomedical fields. We also discuss the current limitations and future perspectives of DLP 3D bioprinting using SF-based bio-ink.

Gelation Dynamics during Photo-Cross-Linking of Polymer Nanocomposite Hydrogels

Embedding nanomaterials into polymer hydrogels enables the design of functional materials with tailored chemical, mechanical, and optical properties. Nanocapsules that protect interior cargo and disperse readily through a polymeric matrix have drawn particular interest for their ability to integrate chemically incompatible systems and to further expand the parameter space for polymer nanocomposite hydrogels. The properties of polymer nanocomposite hydrogels depend on the material composition and processing route, which were explored systematically in this work. The gelation kinetics of network-forming polymer solutions with and without silica-coated nanocapsules bearing polyethylene glycol (PEG) surface ligands were investigated using in situ dynamic rheology measurements. Network-forming polymers comprised either 4-arm or 8-arm star PEG with terminal anthracene groups, which dimerize upon irradiation with ultraviolet (UV) light. The PEG-anthracene solutions exhibited rapid gel formation upon UV exposure (365 nm); gel formation was observed as a crossover from liquid-like to solid-like behavior during in situ small-amplitude oscillatory shear rheology. This crossover time was non-monotonic with polymer concentration. Far below the overlap concentration (c/c* ≪ 1), spatially separated PEG-anthracene molecules were subject to forming intramolecular loops over intermolecular cross-links, thereby slowing the gelation process. Near the polymer overlap concentration (c/c* ∼ 1), rapid gelation was attributed to the ideal proximity of anthracene end groups from neighboring polymer molecules. Above the overlap concentration (c/c* > 1), increased solution viscosities hindered molecular diffusion, thereby reducing the frequency of dimerization reactions. Adding nanocapsules to PEG-anthracene solutions resulted in faster gelation than nanocapsule-free PEG-anthracene solutions with equivalent effective polymer concentrations. The final elastic modulus of nanocomposite hydrogels increased with nanocapsule volume fraction, signifying synergistic mechanical reinforcement by nanocapsules despite not being cross-linked into the polymer network. Overall, these findings quantify the impact of nanocapsule addition on the gelation kinetics and mechanical properties of polymer nanocomposite hydrogels, which are promising materials for applications in optoelectronics, biotechnology, and additive manufacturing.

Enzyme-triggered- and tumor-targeted delivery with tunable, methacrylated poly(ethylene glycols) and hyaluronic acid hybrid nanogels

Enzyme-responsive polymeric-based nanostructures are potential candidates for serving as key materials in targeted drug delivery carriers. However, the major risk in their prolonged application is fast disassembling of the short-lived polymeric-based structures. Another disadvantage is the limited accessibility of the enzyme to the moieties that are located inside the network. Here, we report on a modified environmentally responsive and enzymatically cleavable nanogel carrier that contains a hybrid network. A properly adjusted volume phase transition (VPT) temperature allowed independent shrinking of a) poly(ethylene glycol) methyl ether methacrylate (OEGMA) with di(ethylene glycol) and b) methyl ether methacrylate (MEO2MA) part of the network, and the exposition of hyaluronic acid methacrylate (MeHa) network based carboxylic groups for its targeted action with the cellular based receptors. This effect was substantial after raising temperature in typical hyperthermia-based treatment therapies. Additionally, novel tunable NGs gained an opportunity to store- and to efficient-enzyme-triggered release relatively low but highly therapeutic doses of doxorubicin (DOX) and mitoxantrone (MTX). The controlled enzymatic degradation of NGs could be enhanced by introducing more hyaluronidase enzyme (HAdase), that is usually overexpressed in cancer environments. MTT assay results revealed effective cytotoxic activity of the NGs against the human MCF-7 breast cancer cells, the A278 ovarian cancer cells and also cytocompatibility against the MCF-10A and HOF healthy cells. The obtained tunable, hybrid network NGs might be used as a useful platform for programmed delivery of other pharmaceuticals and diagnostics in therapeutic applications.

HA PEGylated Filler in Association with an Infrared Energy Device for the Treatment of Facial Skin Aging: 150 Day Follow-Up Data Report

BACKGROUND

The face is the area most exposed to the normal course of skin aging, both intrinsically and extrinsically. The aim of the study was to evaluate the cellular and clinical response of a therapeutic protocol aimed at countering facial skin aging.

MATERIALS AND METHODS

Twenty female patients with facial skin laxity and photodamage underwent combined therapy including mesotherapy using non-cross-linked hyaluronic acid with calcium hydroxyapatite and an infrared energy-based device treatment with subsequent implementation of PEG-cross-linked hyaluronic acid soft tissue fillers. To evaluate the benefits, patients underwent histological, immunological, and biomechanical evaluations before the treatment and at 21 and 150 days after the treatment.

RESULTS

The histological results at 21 days and 150 days after the procedure showed an increase in the number of fibroblasts and angiogenesis. As for the immunological aspect, it was shown that the treatment has an immunomodulating action, avoiding the activation of CD4 and CD8 cells. Biomechanical data showed that, at 150 days after treatment, the average changes in skin elasticity increased by 72% and the skin hydration increased by 49%.

CONCLUSIONS

A combination of an infrared energy-based device treatment with both non-cross-linked hyaluronic acid and novel PEG-cross-linked hyaluronic acid leads to numerous positive cutaneous changes after histological, immunological, and biomechanical evaluations.

Hydrogel composite mimics biological tissues

A novel composite hydrogel was developed that shows remarkable similarities to load bearing biological tissues. The composite gel consisting of a poly(vinyl alcohol (PVA) matrix filled with poly(acrylic acid) (PAA) microgel particles exhibits osmotic and mechanical properties that are qualitatively different from regular gels. In the PVA/PAA system the swollen PAA particles "inflate" the PVA network. The swelling of the PAA is limited by the tensile stress P_el developing in the PVA matrix. P_el increases with increasing swelling degree, which is opposite to the decrease of the elastic pressure observed in regular gels. The maximum tensile stress Pmaxel can be identified as a quantity that defines the load bearing ability of the composite gel. Systematic osmotic swelling pressure measurements have been made on PVA/PAA gels to determine the effects of PVA stiffness, PAA crosslink density, and Ca²⁺ ion concentration on Pmaxel. It is found that Pmaxel increases with the stiffness of the PVA matrix, and decreases with (i) increasing crosslink density of the PAA and (ii) increasing Ca²⁺ ion concentration. Small angle neutron scattering (SANS) measurements indicate only a weak interaction between the PVA and PAA gels. It is demonstrated that the osmotic swelling pressure of PVA/PAA composite gels reproduces the osmotic behavior of healthy and osteoarthritic cartilage.

Polymer-based thermoresponsive hydrogels for controlled drug delivery

INTRODUCTION

controlled drug delivery through hydrogels is generally limited by the poor barrier that polymeric network can create to diffusion mechanism. Stimuli responsive polymers can help in this way guaranteeing that delivery can be sustained and finely controlled using an external stimulus.

AREA COVERED

this review provides an overview of recent studies about the use of temperature as an external stimulus able to work as an efficient new route of drug's administration. Thermoresponsive hydrogels are discussed and compared in terms of physical properties and mechanism of drug release considering their classification in intrinsically (formed by thermosensitive polymers) and non-intrinsically (polymers with thermosensitive moieties) hydrogels.

EXPERT OPINION

thermoresponsive hydrogels can be developed by using different polymers added or not with micro/nanoparticles of organic or inorganic origin. In both cases the final system represents an innovative way for the local and sustained drug delivery in a specific site of the body. In particular, it is possible to obtain an on-demand release of drug by applying a local increase of temperature to the system.

Photo-crosslinked hyaluronic acid hydrogel as a biomimic extracellular matrix to recapitulate in vivo features of breast cancer cells

2D cell culture is widely utilized to develop anti-cancer drugs and to explore the mechanisms of cancer tumorigenesis and development. However, the findings obtained from 2D culture often fail to provide guidance for clinical tumor treatments since it cannot precisely replicate the features of real tumors. 3D tumor models capable of recapitulating native tumor microenvironments have been proved to be a promising alternative technique. Herein, we constructed a breast tumor model from novel hyaluronic acid (HA) hydrogel which was prepared through photocrosslinking of methacrylated HA. The hydrogel was used as a biomimetic extracellular matrix to incubate MCF-7 cells. It was found that methacrylation degree had great effects on hydrogel's microstructure, mechanical performances, and liquid-absorbing and degradation abilities. Optimized hydrogel exhibited highly porous morphology, high equilibrium swelling ratio, suitable mechanical properties, and hyaluronidase-responsive degradation behavior. The results demonstrated that the HA hydrogel facilitated MCF-7 cell proliferation and growth in an aggregation manner. Furthermore, 3D-cultured MCF-7 cells not only up-regulated the expression of VEGF, bFGF and interleukin-8 but exhibited greater invasion and tumorigenesis capabilities compared with 2D-cultured cells. Therefore, the HA hydrogel is a reliable substitute for tumor model construction.

Chemically Modified Biopolymers for the Formation of Biomedical Hydrogels

Biopolymers are natural polymers sourced from plants and animals, which include a variety of polysaccharides and polypeptides. The inclusion of biopolymers into biomedical hydrogels is of great interest because of their inherent biochemical and biophysical properties, such as cellular adhesion, degradation, and viscoelasticity. The objective of this Review is to provide a detailed overview of the design and development of biopolymer hydrogels for biomedical applications, with an emphasis on biopolymer chemical modifications and cross-linking methods. First, the fundamentals of biopolymers and chemical conjugation methods to introduce cross-linking groups are described. Cross-linking methods to form biopolymer networks are then discussed in detail, including (i) covalent cross-linking (e.g., free radical chain polymerization, click cross-linking, cross-linking due to oxidation of phenolic groups), (ii) dynamic covalent cross-linking (e.g., Schiff base formation, disulfide formation, reversible Diels-Alder reactions), and (iii) physical cross-linking (e.g., guest-host interactions, hydrogen bonding, metal-ligand coordination, grafted biopolymers). Finally, recent advances in the use of chemically modified biopolymer hydrogels for the biofabrication of tissue scaffolds, therapeutic delivery, tissue adhesives and sealants, as well as the formation of interpenetrating network biopolymer hydrogels, are highlighted.

Evaluation of the Higher Order Structure of Biotherapeutics Embedded in Hydrogels for Bioprinting and Drug Release

Biocompatible hydrogels for tissue regeneration/replacement and drug release with specific architectures can be obtained by three-dimensional bioprinting techniques. The preservation of the higher order structure of the proteins embedded in the hydrogels as drugs or modulators is critical for their biological activity. Solution nuclear magnetic resonance (NMR) experiments are currently used to investigate the higher order structure of biotherapeutics in comparability, similarity, and stability studies. However, the size of pores in the gel, protein-matrix interactions, and the size of the embedded proteins often prevent the use of this methodology. The recent advancements of solid-state NMR allow for the comparison of the higher order structure of the matrix-embedded and free isotopically enriched proteins, allowing for the evaluation of the functionality of the material in several steps of hydrogel development. Moreover, the structural information at atomic detail on the matrix-protein interactions paves the way for a structure-based design of these biomaterials.

Imaging therapeutic peptide transport across intestinal barriers

Oral delivery is a highly preferred method for drug administration due to high patient compliance. However, oral administration is intrinsically challenging for pharmacologically interesting drug classes, in particular pharmaceutical peptides, due to the biological barriers associated with the gastrointestinal tract. In this review, we start by summarizing the pharmacological performance of several clinically relevant orally administrated therapeutic peptides, highlighting their low bioavailabilities. Thus, there is a strong need to increase the transport of peptide drugs across the intestinal barrier to realize future treatment needs and further development in the field. Currently, progress is hampered by a lack of understanding of transport mechanisms that govern intestinal absorption and transport of peptide drugs, including the effects of the permeability enhancers commonly used to mediate uptake. We describe how, for the past decades, mechanistic insights have predominantly been gained using functional assays with end-point read-out capabilities, which only allow indirect study of peptide transport mechanisms. We then focus on fluorescence imaging that, on the other hand, provides opportunities to directly visualize and thus follow peptide transport at high spatiotemporal resolution. Consequently, it may provide new and detailed mechanistic understanding of the interplay between the physicochemical properties of peptides and cellular processes; an interplay that determines the efficiency of transport. We review current methodology and state of the art in the field of fluorescence imaging to study intestinal barrier transport of peptides, and provide a comprehensive overview of the imaging-compatible in vitro, ex vivo, and in vivo platforms that currently are being developed to accelerate this emerging field of research.

Conductive GelMA-Collagen-AgNW Blended Hydrogel for Smart Actuator

Blended hydrogels play an important role in enhancing the properties (e.g., mechanical properties and conductivity) of hydrogels. In this study, we generated a conductive blended hydrogel, which was achieved by mixing gelatin methacrylate (GelMA) with collagen, and silver nanowire (AgNW). The ratio of GelMA, collagen and AgNW was optimized and was subsequently gelated by ultraviolet light (UV) and heat. The scanning electron microscope (SEM) image of the conductive blended hydrogels showed that collagen and AgNW were present in the GelMA hydrogel. Additionally, rheological analysis indicated that the mechanical properties of the conductive GelMA–collagen–AgNW blended hydrogels improved. Biocompatibility analysis confirmed that the human umbilical vein endothelial cells (HUVECs) encapsulated within the three-dimensional (3D), conductive blended hydrogels were highly viable. Furthermore, we confirmed that the molecule in the conductive blended hydrogel was released by electrical stimuli-mediated structural deformation. Therefore, this conductive GelMA–collagen–AgNW blended hydrogel could be potentially used as a smart actuator for drug delivery applications.

Encapsulation and <i>In Vitro </i>Controlled Release of Doxycycline in Temperature-Sensitive Hydrogel Composed of Polyethyleneglycol–polypeptide (L-Alanine-co-L-Aspartate)

Doxycycline was loaded with synthesized micelles composed of methyl Poly (ethylene glycol-block-poly (L-alanine–co–L-aspartate), or mPEG–Ala–Asp, and then characterized as a drug delivery carrier. The synthesis of the temperature-sensitive mPEG–Ala–Asp block copolymer was carried out by two-step ring-opening polymerization: firstly, the mPEG reacts with L-alanine N-carboxylic anhydride, and secondly the resulting mPEG–Ala reacts with benzyl aspartate N-carboxylic anhydride. The molecular structure of the copolymers obtained was determined by FT-IR and NMR spectroscopy methods and the micelles were characterized by SEM, TEM and DLS, respectively. The controlled release of Dox from hydrogel in the presence of PBS (8 to 9% by weight) lasts 6 to 7 days exhibiting stable release rates. The drug release mechanisms were studied: Higuchi and zero order models. The results and correlation coefficients applied to the Higuchi and zero-order models. The findings show the potential use of mPEG–Ala–Asp as an effective depot matrix to deliver anthracycline class drugs.

Hyaluronic Acid-Modified and Doxorubicin-Loaded Gold Nanoparticles and Evaluation of Their Bioactivity

Functionalized gold nanoparticles (AuNPs) have been successfully used in many fields as a result of having low cytotoxicity, good biocompatibility, excellent optical properties, and their ability to target cancer cells. Here, we synthesized AuNP carriers that were modified by hyaluronic acid (HA), polyethylene glycol (PEG), and adipic dihydrazide (ADH). The antitumor drug doxorubicin (Dox) was loaded into AuNP carriers and attached chemically. The Au nanocomposite AuNPs@MPA-PEG-HA-ADH-Dox was able to disperse uniformly in aqueous solution, with a diameter of 15 nm. The results of a 3-(4,5-dimethyl-2-thiazolyl)-2,5-diphenyltetrazolium bromide (MTT) assay indicated that AuNP carriers displayed very little toxicity toward cells in high doses, although the antitumor properties of Au nanocomposites were significantly enhanced. Cellular uptake experiments demonstrated that AuNPs modified with hyaluronic acid were more readily ingested by HepG2 and HCT-116 cells, as they have a large number of CD44 receptors. A series of experiments measuring apoptosis such as Rh123 and annexin V-FITC staining, and analysis of mitochondrial membrane potential (MMP) analysis, indicated that apoptosis played a role in the inhibition of cell proliferation by AuNPs@MPA-PEG-HA-ADH-Dox. Excessive production of reactive oxygen species (ROS) was the principal mechanism by which the Au nanocomposites inhibited cell proliferation, leading to apoptosis. Thus, the Au nanocomposites, which allowed cell imaging in real-time and induced apoptosis in specific cell types, represent theragnostic agents with potential for future clinical applications in bowel cancer.

Di(2-picolyl)amine-functionalized poly(ethylene glycol) hydrogels with tailorable metal–ligand coordination crosslinking

A new class of metallo-hydrogels has been developed using di(2-picolyl)amine (DPA)-functionalized 4-arm polyethylene glycol (4A-PEG-DPAn) polymers crosslinked by metal–ligand coordination.

Hyaluronic acid and chondroitin sulfate (meth)acrylate-based hydrogels for tissue engineering: Synthesis, characteristics and pre-clinical evaluation

Hydrogels based on photocrosslinkable Hyaluronic Acid Methacrylate (HAMA) and Chondroitin Sulfate Methacrylate (CSMA) are presently under investigation for tissue engineering applications. HAMA and CSMA gels offer tunable characteristics such as tailorable mechanical properties, swelling characteristics, and enzymatic degradability. This review gives an overview of the scientific literature published regarding the pre-clinical development of covalently crosslinked hydrogels that (partially) are based on HAMA and/or CSMA. Throughout the review, recommendations for the next steps in clinical translation of hydrogels based on HAMA or CSMA are made and potential pitfalls are defined. Specifically, a myriad of different synthetic routes to obtain polymerizable hyaluronic acid and chondroitin sulfate derivatives are described. The effects of important parameters such as degree of (meth)acrylation and molecular weight of the synthesized polymers on the formed hydrogels are discussed and useful analytical techniques for their characterization are summarized. Furthermore, the characteristics of the formed hydrogels including their enzymatic degradability are discussed. Finally, a summary of several recent applications of these hydrogels in applied fields such as cartilage and cardiac regeneration and advanced tissue modelling is presented.

A blend hydrogel based on polyoxometalate for long-term and repeatedly localized antibacterial application study

Herein, a polyoxometalate (POM)-based blend hydrogel system was in situ constructed by incorporating cetyltrimethylammoniumbromide (CTAB)-encapsulated POM cationic micelles to bare hydrogel matrixes followed by copolymerization of multivalent crosslinking groups. It was demonstrated that the fabricated blend hydrogel possessed tunable physicochemical properties, good swelling behavior (maximum swelling rate of 229% in buffer solution of pH 8.0), excellent local action and sustained release of POM component (release ratio achieved nearly 100% at the time of 120 min). Antibacterial activity study revealed that the introduction of POM greatly improved the bioavailability of itself, namely, leading to a more effective enhancement of therapeutic effects (survival ratio of both strains less than 5%). Besides, bactericidal rates (ca. 51%) were achieved even after six runs repeated, thereby verifying the biological application potential of this material. Finally, the practical application potentials were investigated and future prospects in relevant research areas were forecasted.

Microbial Exopolysaccharides as Drug Carriers

Microbial exopolysaccharides are peculiar polymers that are produced by living organisms and protect them against environmental factors. These polymers are industrially recovered from the medium culture after performing a fermentative process. These materials are biocompatible and biodegradable, possessing specific and beneficial properties for biomedical drug delivery systems. They can have antitumor activity, they can produce hydrogels with different characteristics due to their molecular structure and functional groups, and they can even produce nanoparticles via a self-assembly phenomenon. This review studies the potential use of exopolysaccharides as carriers for drug delivery systems, covering their versatility and their vast possibilities to produce particles, fibers, scaffolds, hydrogels, and aerogels with different strategies and methodologies. Moreover, the main properties of exopolysaccharides are explained, providing information to achieve an adequate carrier selection depending on the final application.

Green Synthetic Approach for Photo-Cross-Linkable Methacryloyl Hyaluronic Acid with a Tailored Substitution Degree

The conventional synthesis of methacryloyl hyaluronic acid (HA-MA) requires an extremely high amount of modification reagents, the organic solvents, and strenuous purification steps. Herein, a new green synthetic approach for the methacryloyl hyaluronic acid preparation with a tailorable substitution degree (SD) is reported, in which methacryloyl hydrazide is used as a more reactive reagent and only water is used as the solvent. The new method significantly reduces the amount of functionalization reagents (as low as only 0.3 equiv) and avoids the use of any organic solvents. The substitution degree can be tailored from 26% to 86% in a facile controllable manner. The new HA-MA (termed as HA-MA-H) can be UV-cross-linked to form a biocompatible hydrogel.

Hyaluronic Acid and Controlled Release: A Review

Hyaluronic acid (HA) also known as hyaluronan, is a natural polysaccharide—an anionic, non-sulfated glycosaminoglycan—commonly found in our bodies. It occurs in the highest concentrations in the eyes and joints. Today HA is used during certain eye surgeries and in the treatment of dry eye disease. It is a remarkable natural lubricant that can be injected into the knee for patients with knee osteoarthritis. HA has also excellent gelling properties due to its capability to bind water very quickly. As such, it is one the most attractive controlled drug release matrices and as such, it is frequently used in various biomedical applications. Due to its reactivity, HA can be cross-linked or conjugated with assorted bio-macromolecules and it can effectively encapsulate several different types of drugs, even at nanoscale. Moreover, the physiological significance of the interactions between HA and its main membrane receptor, CD44 (a cell-surface glycoprotein that modulates cell–cell interactions, cell adhesion and migration), in pathological processes, e.g., cancer, is well recognized and this has resulted in an extensive amount of studies on cancer drug delivery and tumor targeting. HA acts as a therapeutic but also as a tunable matrix for drug release. Thus, this review focuses on controlled or sustained drug release systems assembled from HA and its derivatives. More specifically, recent advances in controlled release of proteins, antiseptics, antibiotics and cancer targeting drugs from HA and its derivatives were reviewed. It was shown that controlled release from HA has many benefits such as optimum drug concentration maintenance, enhanced therapeutic effects, improved efficiency of treatment with less drug, very low or insignificant toxicity and prolonged in vivo release rates.

A Transcriptome Sequencing Study on Genome-Wide Gene Expression Differences of 3D Cultured Chondrocytes in Hydrogel Scaffolds with Different Gel Density

Hydrogel is considered as a promising cell delivery vehicle in cartilage tissue engineering, whose tunable microenvironments may influence the function and fate of encapsulated chondrocytes. Here, the transcriptomes of chondrocytes that are encapsulated and cultured in hydrogel constructs respectively made of 0.8% and 4% alginate solution are investigated. Differences in chondrocyte transcriptome are detected via RNA-sequencing from these two cultural conditions. The differentially expressed genes (DEGs) are reflected in extracellular matrix (ECM) secretion, cell cycle, proliferation, cartilage development, and so on. Significantly, the expression of DEGs associated with cartilage ECM and cell proliferation are upregulated in 0.8% constructs; whilst the expressions of DEGs involved in cell cycle and matrix degradation are upregulated in 4% constructs. Moreover, interestingly, the expressions of chondrocyte hypertrophy markers are upregulated in 0.8% constructs; while 4% constructs seemingly favor the long-term maintenance of chondrocyte phenotype. Taken together, this study confirms on transcriptomic level that gel density affects gene expression and phenotype of the encapsulated chondrocytes; therefore, it may provide guidance for future design and fabrication of cartilage tissue engineering scaffolds.

A Robust, Tough and Multifunctional Polyurethane/Tannic Acid Hydrogel Fabricated by Physical-Chemical Dual Crosslinking

Commonly synthetic polyethylene glycol polyurethane (PEG-PU) hydrogels possess poor mechanical properties, such as robustness and toughness, which limits their load-bearing application. Hence, it remains a challenge to prepare PEG-PU hydrogels with excellent mechanical properties. Herein, a novel double-crosslinked (DC) PEG-PU hydrogel was fabricated by combining chemical with physical crosslinking, where trimethylolpropane (TMP) was used as the first chemical crosslinker and polyphenol compound tannic acid (TA) was introduced into the single crosslinked PU network by simple immersion process. The second physical crosslinking was formed by numerous hydrogen bonds between urethane groups of PU and phenol hydroxyl groups in TA, which can endow PEG-PU hydrogel with good mechanical properties, self-recovery and a self-healing capability. The research results indicated that as little as a 30 mg·mL-1 TA solution enhanced the tensile strength and fracture energy of PEG-PU hydrogel from 0.27 to 2.2 MPa, 2.0 to 9.6 KJ·m-2, respectively. Moreover, the DC PEG-PU hydrogel possessed good adhesiveness to diverse substrates because of TA abundant catechol groups. This work shows a simple and versatile method to prepare a multifunctional DC single network PEG-PU hydrogel with excellent mechanical properties, and is expected to facilitate developments in the biomedical field.

Three-dimensional cell culture systems as an in vitro platform for cancer and stem cell modeling

Three-dimensional (3D) culture systems are becoming increasingly popular due to their ability to mimic tissue-like structures more effectively than the monolayer cultures. In cancer and stem cell research, the natural cell characteristics and architectures are closely mimicked by the 3D cell models. Thus, the 3D cell cultures are promising and suitable systems for various proposes, ranging from disease modeling to drug target identification as well as potential therapeutic substances that may transform our lives. This review provides a comprehensive compendium of recent advancements in culturing cells, in particular cancer and stem cells, using 3D culture techniques. The major approaches highlighted here include cell spheroids, hydrogel embedding, bioreactors, scaffolds, and bioprinting. In addition, the progress of employing 3D cell culture systems as a platform for cancer and stem cell research was addressed, and the prominent studies of 3D cell culture systems were discussed.

Current progress in hepatic tissue regeneration by tissue engineering

Liver, as a vital organ, is responsible for a wide range of biological functions to maintain homeostasis and any type of damages to hepatic tissue contributes to disease progression and death. Viral infection, trauma, carcinoma, alcohol misuse and inborn errors of metabolism are common causes of liver diseases are a severe known reason for leading to end-stage liver disease or liver failure. In either way, liver transplantation is the only treatment option which is, however, hampered by the increasing scarcity of organ donor. Over the past years, considerable efforts have been directed toward liver regeneration aiming at developing new approaches and methodologies to enhance the transplantation process. These approaches include producing decellularized scaffolds from the liver organ, 3D bio-printing system, and nano-based 3D scaffolds to simulate the native liver microenvironment. The application of small molecules and micro-RNAs and genetic manipulation in favor of hepatic differentiation of distinct stem cells could also be exploited. All of these strategies will help to facilitate the application of stem cells in human medicine. This article reviews the most recent strategies to generate a high amount of mature hepatocyte-like cells and updates current knowledge on liver regenerative medicine.