Self-cross-linking biopolymers as injectable in situ forming biodegradable scaffolds

A bioactive composite sponge based on biomimetic collagen fibril and oxidized alginate for noncompressible hemorrhage and wound healing

The study focuses on developing a bioactive shape memory sponge to address the urgent demand for short-term rapid hemostasis and long-term wound healing in noncompressible hemorrhage cases. A composite sponge was created by spontaneously generating pores and double cross-linking under mild conditions using biomimetic collagen fibril (BCF) and oxidized alginate (OA) as natural backbone, combined with an inert calcium source (Ca) from CaCO3-GDL slow gelation mechanism. The optimized BCF/OACa (5/5) sponge efficiently absorbed blood after compression and recovered to its original state within 11.2 ± 1.3 s, achieving physical hemostatic mechanism. The composite sponge accelerated physiological coagulation by promoting platelet adhesion and activation through BCF, as well as enhancing endogenous and exogenous hemostatic pathways by Ca2+. Compared to commercial PVA expanding hemostatic sponge, the composite sponge reduced bleeding volume and shortened hemostasis time in rat liver injury pick and perforation wound models. Additionally, it stimulated fibroblast migration and differentiation, thus promoting wound healing. It is biodegradable with low inflammatory response and promotes granulation tissue regeneration. In conclusion, this biocomposite sponge provides multiple hemostatic pathways and biochemical support for wound healing, is biologically safe and easy to fabricate, process and use, with significant potential for clinical translation and application.

Naturally derived double-network hydrogels with application as flexible adhesive sensors

Hydrogels have been widely used in the biomedical field, including wearable sensors and biological adhesives. However, achieving a balance between various functionalities, such as wet adhesion, stable conductivity, and biocompatibility, in one customized hydrogel has been a challenging issue. In this study, we developed a multifunctional hydrogel comprising recombinant human collagen (RHC) and aldehyde-modified sodium alginate (Ald-alginate), which was primarily crosslinked through a Schiff-base reaction and metal chelation. Due to the combination of a dynamic covalent crosslinking network (imine linkage between RHC and Ald-alginate) and a dynamic ionic crosslinking network (ionic bonding between Ca2+ and Ald-alginate), the hydrogel exhibited excellent self-healing and injectable behaviors. Benefiting from the high Ca2+ content, the hydrogel also attained antifreezing and conductivity properties. In addition to its excellent conductivity and biocompatibility, the hydrogel exhibited strong wet tissue adhesion ability and could adhere rapidly and strongly to the surfaces of various objects or biological tissues, forming a good sealing environment. Moreover, the hydrogel could be directly adhered to a tissue surface as a flexible sensor to accurately detect physiological signals. The versatility of this multifunctional hydrogel will open new avenues for biomedical applications, such as bioadhesives and biosensing.

Composite Alginate Dialdehyde-Gelatin (ADA-GEL) Hydrogel Containing Short Ribbon-Shaped Fillers for Skeletal Muscle Tissue Biofabrication

Skeletal muscle tissue can be severely damaged by disease or trauma beyond its ability to self-repair, necessitating the further development of biofabrication and tissue-engineering tools for reconstructive processes. Hence, in this study, a composite bioink of oxidized alginate (ADA) and gelatin (GEL) including cell-laden ribbon-shaped fillers is used for enhancing cell alignment and the formation of an anisotropic structure. Different plasma treatments combined with protein coatings were evaluated for the improvement of cell adhesion to poly(lactic-co-glycolic acid) (PLGA) ribbon surfaces. Oxygen plasma activation of 30 W for 5 min showed high immobilization of fibronectin as a protein coating on the PLGA ribbon surface, which resulted in enhanced cell adhesion and differentiation of muscle cells. Furthermore, the effect of various concentrations of CaCl2 solution, used for ionic cross-linking of ADA, on ADA-GEL physical and mechanical properties as well as encapsulated C2C12 cell viability and proliferation behavior was investigated. The pore area was measured via two approaches, cryofixation and lyophilization, which, in accordance with degradation tests and mechanical analysis, showed that 60 mM CaCl2 concentration is the optimum range for cross-linking of the formulation of ADA 2.5%w/v-GEL 3.75%w/v. These cross-linked hydrogels showed a compression modulus of 11.5 kPa (similar to the native skeletal muscle tissue), a high viability of C2C12 muscle cells (>80%), and a high proliferation rate during 7 days of culture. Rheological characterization of the ADA-GEL composite hydrogel containing short fillers (100 μm long) showed its suitability as a bioink with shear-thinning and flow behavior compared to ADA-GEL.

Preparation and properties of biomimetic bone repair hydrogel with sandwich structure

One of the critical factors that determines the biological properties of scaffolds is their structure. Due to the mechanical and structural discrepancies between the target bone and implants, the poor internal architecture design and difficulty in degradation of conventional bone implants may cause several adverse outcomes. To date, many scaffolds, such as 3-D printed sandwich structures, have been successfully developed for the repair of bone defects; however, the steps of these methods are complex and costly. Hydrogels have emerged as a unique scaffold material for repairing bone defects because of their good biocompatibility and excellent physicochemical properties. However, studies exploring bioinspired hydrogel scaffolds with hierarchical structures are scarce. More efforts are needed to incorporate bioinspired structures into hydrogel scaffolds to achieve optimal osteogenic properties. In this study, we developed a low-cost and easily available hydrogel matrix that mimicked the natural structure of the bone's porous sandwich to promote new bone growth and tissue integration. A comprehensive evaluation was conducted on the microstructure, swelling rate, and mechanical properties of this hydrogel. Furthermore, a 3D finite element analysis was employed to model the structure-property relationship. The results indicate that the sandwich-structured hydrogel is a promising scaffold material for bone injury repair, exhibiting enhanced compressive stress, elastic modulus, energy storage modulus, and superior force transmission.

Multibiofunctional Self-healing Adhesive Injectable Nanocomposite Polysaccharide Hydrogel

Injectable hydrogels with good antimicrobial and antioxidant properties, self-healing characteristics, suitable mechanical properties, and therapeutic effects have great practical significance for developing treatments for pressing healthcare challenges. Herein, we have designed a novel, self-healing injectable hydrogel composite incorporating cross-linked biofunctional nanomaterials by mixing alginate aldehyde (Ox-Alg), quaternized chitosan (QCS), adipic acid dihydrazide (ADH), and copper oxide nanosheets surface functionalized with folic acid as the bioligand (F-CuO). Gelation was achieved under physiological conditions via the dynamic Schiff base cross-linking mechanism. The developed nanocomposite injectable hydrogel demonstrated the fast self-healing ability essential to bear deformation and outstanding antibacterial properties along with ROS scavenging ability. Furthermore, the optimized formulation of our F-CuO-embedded injectable hydrogel exhibited excellent cytocompatibility, blood compatibility, and in vitro wound healing performance. Taken together, the F-CuO nanosheet cross-linked injectable hydrogel composite presented herein offers a promising candidate biomaterial with multifunctional properties to develop solutions for addressing clinical challenges.

Hydrogels Based on Proteins Cross-Linked with Carbonyl Derivatives of Polysaccharides, with Biomedical Applications

Adding carbonyl groups into the hydrogel matrix improves the stability and biocompatibility of the hydrogels, making them suitable for different biomedical applications. In this review article, we will discuss the use of hydrogels based on polysaccharides modified by oxidation, with particular attention paid to the introduction of carbonyl groups. These hydrogels have been developed for several applications in tissue engineering, drug delivery, and wound healing. The review article discusses the mechanism by which oxidized polysaccharides can introduce carbonyl groups, leading to the development of hydrogels through cross-linking with proteins. These hydrogels have tunable mechanical properties and improved biocompatibility. Hydrogels have dynamic properties that make them promising biomaterials for various biomedical applications. This paper comprehensively analyzes hydrogels based on cross-linked proteins with carbonyl groups derived from oxidized polysaccharides, including microparticles, nanoparticles, and films. The applications of these hydrogels in tissue engineering, drug delivery, and wound healing are also discussed.

Recent Advances in Hydrogel Technology in Delivering Mesenchymal Stem Cell for Osteoarthritis Therapy

Osteoarthritis (OA), a chronic joint disease affecting over 500 million individuals globally, is characterized by the destruction of articular cartilage and joint inflammation. Conventional treatments are insufficient for repairing damaged joint tissue, necessitating novel therapeutic approaches. Mesenchymal stem cells (MSCs), with their potential for differentiation and self-renewal, hold great promise as a treatment for OA. However, challenges such as MSC viability and apoptosis in the ischemic joint environment hinder their therapeutic effectiveness. Hydrogels with biocompatibility and degradability offer a three-dimensional scaffold that support cell viability and differentiation, making them ideal for MSC delivery in OA treatment. This review discusses the pathological features of OA, the properties of MSCs, the challenges associated with MSC therapy, and methods for hydrogel preparation and functionalization. Furthermore, it highlights the advantages of hydrogel-based MSC delivery systems while providing insights into future research directions and the clinical potential of this approach.

Chemically modified seaweed polysaccharides: Improved functional and biological properties and prospective in food applications

Seaweed polysaccharides are natural biomacromolecules with unique physicochemical properties (e.g., good gelling, emulsifying, and film-forming properties) and diverse biological activities (e.g., anticoagulant, antioxidant, immunoregulatory, and antitumor effects). Furthermore, they are nontoxic, biocompatible and biodegradable, and abundant in resources. Therefore, they have been widely utilized in food, cosmetics, and pharmaceutical industries. However, their properties and bioactivities sometimes are not satisfactory for some purposes. Modification of polysaccharides can impart the amphiphilicity and new functions to the biopolymers and change the structure and conformation, thus effectively improving their functional properties and biological activities so as to meet the requirement for targeted applications. This review outlined the modification methods of representative red algae polysaccharides (carrageenan and agar), brown algae polysaccharides (fucoidan, alginate, and laminaran), and green algae polysaccharides (ulvan) that have potential food applications, including etherification, esterification, degradation, sulfation, phosphorylation, selenylation, and so on. The improved functional properties and bioactivities of the modified seaweed polysaccharides and their potential food applications are also summarized.

A tough and bioadhesive injectable hydrogel formed with maleimidyl alginate and pristine gelatin

Injectable hydrogels have wide applications in clinical practice. However, the development of tough and bioadhesive ones based on biopolymers, along with biofriendly and robust crosslinking strategies, still represents a great challenge. Herein, we report an injectable hydrogel composed of maleimidyl alginate and pristine gelatin, for which the precursor solutions could self-crosslink via mild Michael-type addition without any catalyst or external energy upon mixing. This hydrogel is tough and bioadhesive, which can maintain intactness as well as adherence to the defect of porcine skin under fierce bending and twisting, warm water bath, and boiling water shower. Besides, it is biocompatible, bioactive and biodegradable, which could support the growth and remodeling of cells by affording an extracellular matrix-like environment. As a proof of application, we demonstrate that this hydrogel could significantly accelerate diabetic skin wound healing, thereby holding great potential in healthcare.

Bone morphogenetic protein-2 loaded triple helix recombinant collagen-based hydrogels for enhancing bone defect healing

The development of efficacious bone substitute biomaterials remains a major challenge for research and clinical surgical. Herein, we constructed triple helix recombinant collagen (THRC) -based hydrogels loading bone morphogenetic protein-2 (BMP-2) to stimulate bone regeneration in cranial defects. A series of in situ forming hydrogels, denoted as THRC-oxidized carboxymethylcellulose (OCMC)-N-succinyl-chitosan (NSC) hydrogels, was synthesized via a Schiff base reaction involving OCMC, THRC and NSC. The hydrogels underwent rapid formation under physiological pH and temperature conditions. The composite hydrogel exhibits a network structure characterized by uniform pores, the dimensions of which can be tuned by varying THRC concentrations. The THRC-OCMC-NSC and THRC-OCMC-NSC-BMP2 hydrogels display heightened mechanical strength, substantial biodegradability, and lower swelling properties. The THRC-OCMC-NSC hydrogels show exceptional biocompatibility and bioactivity, accelerating cell proliferation, adhesion, and differentiation. Magnetic resonance imaging, computed tomography and histological analysis of rat cranial defects models revealed that the THRC-OCMC-NSC-BMP2 hydrogels substantially promote new bone formation and expedite bone regeneration. The novel THRC-OCMC-NSC-BMP2 hydrogels emerge as promising candidates for bone substitutes, demonstrating substantial potential in bone repair and regeneration applications.

Nanosphere-reinforced polysaccharide self-healing hydrogels for infected wound healing

Bacterial infection remarkably impedes wound healing, with antibiotics traditionally serving as the primary therapeutic intervention. However, the escalating misuse of antibiotics and the emergence of bacterial resistance present substantial treatment challenges for infected wounds. Consequently, the development of antibiotic-free antimicrobial dressings holds pertinent research and clinical relevance. To this end, this study aimed to introduce an all-natural hydrogel dressing, amalgamating polyphenols and polysaccharides, exhibiting pronounced antibacterial and antioxidant properties without relying on antibiotics. First, we constructed curcumin-tannic acid‑zinc ion nanospheres (CTZN) through self-assembly. Our experimental results showed that the nanospheres had excellent biocompatibility, antioxidant, and antimicrobial abilities. Subsequently, we prepared carboxymethylated chitosan/oxidized sodium alginate hydrogels via Schiff base reactions. Incorporation of CTZN into the hydrogel system not only improves the inherent qualities of the hydrogel but also confers multifunctional properties, including antimicrobial, antioxidant, and anti-inflammatory abilities. In this study, we enhanced the physicochemical properties and biological activity of hydrogels by introducing natural material nanospheres, offering a novel approach that could pave the way for the development of purely natural biomaterial dressings.

A novel injectable hydrogel prepared from phenylboronic acid modified gelatin and oxidized-dextran for bone tissue engineering

Complicated fractures have always been challenging in orthopaedics. Designing a multifunctional biomaterial that can contribute to the treatment of fractures using a simple operation remains challenging. Here, we developed a trinity hydrogel system consisting of hydrogel prepared from phenylboronic acid modified gelatin and oxidized-dextran, lithium and cobalt co-doped mesoporous bioactive glass nanoparticles (MBGNs), and irisin. This hydrogel material exhibits considerable injectability, fat-to-shape, and self-healing characteristics. In addition, compared to hydrogel prepared from gelatin and oxidized-dextran, the hydrogel material presented a noticeable enhancement in compression stress and adhesion strength towards porcine bone fragments, which enables it more effectively splice bone fragments during surgery. Based on the various interactions between irisin and the hydrogel network, the system exhibited a clear sustained release of irisin. Based on the results of in vitro cell tests, the hydrogel material showed good cytocompatibility. And it also considerably enhanced the in vitro pro-osteogenic and pro-angiogenic capacities of bone marrow mesenchymal stromal cells (BMSCs) and human umbilical vein endothelial cells (HUVECs). In vivo experimental results indicated that this hydrogel considerably improved the repair of cranial defects in rats. The current study provides a feasible strategy for the treatment of bone fractures and stimulation of fracture healing.

Phosvitin-based hydrogels prepared in AmimCl under magnetic field treatment: Structural characteristics, biological functions, and application in skin wound healing

Due to the serious bacterial infection of skin and the waste of petroleum-based materials, there is an urgent need to develop natural biodegradable wound dressings with high antibacterial activity. Phosvitin (PSV) has shown its natural antioxidant and antibacterial properties, making it an excellent material for preparing wound healing dressings. In this study, we investigated the effect of magnetic field on the preparation of PSV-Microcrystalline Cellulose (MCC) composite hydrogels in 1-Allyl-3-methylimidazolium chloride (AmimCl) system. The results showed that the prepared hydrogels exhibited homogeneous surface structure, suitable swelling capacity and elasticity modulus, and sufficient thermal stability. The excellent antibacterial and antioxidant activities of hydrogels were mainly resulting from AmimCl and PSV, respectively, and the properties were enhanced after magnetic field treatment. The proteomics analysis indicated that AmimCl can readily penetrate the biological membranes of Staphylococcus aureus (S. aureus), upsetting the metabolism and reducing the virulence. The hydrogels showed great blood compatibility. Compared with the commercial materials, the 5 mT-treated hydrogels presented a comparable wound healing rate in the full-thickness skin injury model. On day 7, the wound healing rate of the 5 mT group reached approximately 84.40 %, which was significantly higher than that of the control group, 72.88 % (P < 0.05). In conclusion, our work provides experience for the development of biodegradable materials combined in ionic liquids and magnetic field, and explores their applications in wound healing dressings.

Cross-Linked Alginate Dialdehyde/Chitosan Hydrogel Encompassing Curcumin-Loaded Bilosomes for Enhanced Wound Healing Activity

The current study aimed to fabricate curcumin-loaded bilosomal hydrogel for topical wound healing purposes, hence alleviating the poor aqueous solubility and low oral bioavailability of curcumin. Bilosomes were fabricated via the thin film hydration technique using cholesterol, Span® 60, and two different types of bile salts (sodium deoxycholate or sodium cholate). Bilosomes were verified for their particle size (PS), polydispersity index (PDI), zeta potential (ZP), entrapment efficiency (EE%), and in vitro drug release besides their morphological features. The optimum formulation was composed of cholesterol/Span® 60 (molar ratio 1:10 w/w) and 5 mg of sodium deoxycholate. This optimum formulation was composed of a PS of 246.25 ± 11.85 nm, PDI of 0.339 ± 0.030, ZP of -36.75 ± 0.14 mv, EE% of 93.32% ± 0.40, and the highest percent of drug released over three days (96.23% ± 0.02). The optimum bilosomal formulation was loaded into alginate dialdehyde/chitosan hydrogel cross-linked with calcium chloride. The loaded hydrogel was tested for its water uptake capacity, in vitro drug release, and in vivo studies on male Albino rats. The results showed that the loaded hydrogel possessed a high-water uptake percent at the four-week time point (729.50% ± 43.13) before it started to disintegrate gradually; in addition, it showed sustained drug release for five days (≈100%). In vivo animal testing and histopathological studies supported the superiority of the curcumin-loaded bilosomal hydrogel in wound healing compared to the curcumin dispersion and plain hydrogel, where there was a complete wound closure attained after the three-week period with a proper healing mechanism. Finally, it was concluded that curcumin-loaded bilosomal hydrogel offered a robust, efficient, and user-friendly dosage form for wound healing.

Preparation and Modification of Collagen/Sodium Alginate-Based Biomedical Materials and Their Characteristics

(1) Background: Collagen and sodium alginate are commonly used in the field of biomedical materials due to their excellent biocompatibility. This study focuses on the preparation, modification, and characterization of collagen/sodium alginate (C/SA)-based biomedical materials. (2) Methods: The characteristics, including surface chemistry, mechanical properties, hygroscopicity, and porosity, were analyzed. The hemostatic activity in vitro was measured using a blood clotting assay and dynamic blood clotting assay. (3) Results: The results from microstructure and porosity measurement revealed that all of the sponges exhibited a porosity of more than 95 percent. The sponge cross-linked with 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide/N-hydroxysuccinimide (EDC/NHS) showed better tensile strength and lower elongation at break. The sponges cross-linked with EDC/NHS and oxidized sodium alginate (OSA) exhibited the highest hygroscopicity in comparison with the uncross-linked sponge. (4) Conclusions: Our study demonstrated that the C/SA-based material we prepared exhibited a high level of porosity, enabling efficient absorption of tissue exudate and blood. Additionally, the materials revealed excellent hemocompatibility, making them suitable for use as a hemostatic dressing in the field of biomedical materials.

Decoding Macrophage Subtypes to Engineer Modulating Hydrogels for the Alleviation of Intervertebral Disk Degeneration

A major pathological basis for low back pain is intervertebral disk degeneration, which is primarily caused by the degeneration of nucleus pulposus cells due to imbalances in extracellular matrix (ECM) anabolism and catabolism. The phenotype of macrophages in the local immune microenvironment greatly influences the balance of ECM metabolism. Therefore, the control over the macrophage phenotype of the ECM is promising to repair intervertebral disk degeneration. Herein, the preparation of an injectable nanocomposite hydrogel is reported by embedding epigallocatechin-3-gallate-coated hydroxyapatite nanorods in O-carboxymethyl chitosan cross-linked with aldehyde hyaluronic acid that is capable of modulating the phenotype of macrophages. The bioactive components play a primary role in repairing the nucleus pulposus, where the hydroxyapatite nanorods can promote anabolism in the ECM through the nucleopulpogenic differentiation of mesenchymal stem cells. In addition, epigallocatechin-3-gallate can decrease catabolism in the ECM in nucleus pulposus by inducing M2 macrophage polarization, which exists in normal intervertebral disks and can alleviate degeneration. The nanocomposite hydrogel system shows promise for the minimally invasive and effective treatment of intervertebral disk degeneration by controlling anabolism and catabolism in the ECM and inhibiting the IL17 signaling pathway (M1-related pathway) in vitro and in vivo.

Fabrication, characterization and potential application of biodegradable polydopamine-modified scaffolds based on natural macromolecules

Sodium alginate (SA)-based implantable scaffolds with slow-release drugs have become increasingly important in the fields of biomedical and tissue engineering. However, high-molecular-weight SA is difficult to remove from the body due to the lack of SA-degrading enzymes. The very slow degradation properties of SA-based scaffolds limit their applications. Herein, we designed a series of biodegradable oxidized SA (OSA)-based scaffolds through amide bonds, imine bonds and hydrogen bridges between OSA and silk fibroin (SF). SF/OSA-0.4 with a blend ratio of 4/1 was chosen for further polydopamine (PDA) surface modification studies through the optimization of those parameters such as different OSA oxidation degrees, and blend ratios. PDA modified SF/OSA-0.4 (Dopa/SF/OSA-0.4) showed the excellent stability, better stretchable properties, a uniform interconnective porous structure, high thermal stability, a low hemolysis ratio and cytotoxicity. In vitro degradation experiments showed that the degradation rate of SF/OSA was significantly higher than that of SF/SA, but the degradation slowed again after PDA modification. Interestingly, the degradation of Dopa/SF/OSA-0.4 in vivo was significantly faster than that in vitro. Dopa/SF/OSA-0.4 was also more conducive to new tissue growth and collagen bundle formation. Moreover, Dopa/SF/OSA-0.4 improved the absorbability of RhB (model drug) and reduced the sudden release of RhB during the sustained release.

A phellinus igniarius polysaccharide/chitosan-arginine hydrogel for promoting diabetic wound healing

Inadequate angiogenesis and inflammation at the wound site have always been a major threat to skin wounds, especially for diabetic wounds that are difficult to heal. Therefore, hydrogel dressings with angiogenesis and antibacterial properties are very necessary in practical applications. This study reported a hydrogel (PCA) based on L-arginine conjugated chitosan (CA) and aldehyde functionalized polysaccharides of Phellinus igniarius (OPPI) as an antibacterial and pro-angiogenesis dressing for wound repair in diabetes for the first time. and discussed its possible mechanism for promoting wound healing. The results showed that PCA had good antioxidant, antibacterial, biological safety and other characteristics, and effectively promoted the healing course of diabetic wound model. In detail, the H&E and Masson staining results showed that PCA promoted normal epithelial formation and collagen deposition. The Western blot results confirmed that PCA decreased the inflammation by inhibiting the IKBα/NF-κB signaling pathway and enhanced angiogenesis by adjusting the level of HIF-1α. In conclusion, PCA is a promising candidate for promoting wound healing in diabetes. Graphic abstract.

Technetium-99m labeled core shell hyaluronate nanoparticles as tumor responsive, metastatic skeletal lesion targeted combinatorial theranostics

Achieving target specific delivery of chemotherapeutics in metastatic skeletal lesions remains a major challenge. Towards this, a dual drug loaded, radiolabeled multi-trigger responsive nanoparticles having partially oxidized hyaluronate (HADA) conjugated to alendronate shell and palmitic acid core were developed. While the hydrophobic drug, celecoxib was encapsulated in the palmitic acid core, the hydrophilic drug, doxorubicin hydrochloride was linked to the shell via a pH responsive imine linkage. Hydroxyapatite binding studies showed affinity of alendronate conjugated HADA nanoparticles to bones. Enhanced cellular uptake of the nanoparticles was achieved via HADA-CD44 receptor binding. HADA nanoparticles demonstrated trigger responsive release of encapsulated drugs in the presence of hyaluronidase, pH and glucose, present in excess in the tumor microenvironment. Efficacy of the nanoparticles for combination chemotherapy was established by >10-fold reduction in IC₅₀ of drug loaded particles with a combination index of 0.453, as compared to free drugs in MDA-MB-231 cells. The nanoparticles could be radiolabeled with the gamma emitting radioisotope technetium-99m (^99mTc) through a simple, 'chelator free', procedure with excellent radiochemical purity (RCP) (>90 %) and in vitro stability. ^99mTc-labeled drug loaded nanoparticles reported herein constitutes a promising theranostic agent to target metastatic bone lesions. STATEMENT OF HYPOTHESES: Technetium-99m labeled, alendronate conjugated, dual targeting, tumor responsive, hyaluronate nanoparticle for tumor specific drug release and enhanced therapeutic effect, with real-time in vivo monitoring.

Nanoparticle Synthesis and Their Integration into Polymer-Based Fibers for Biomedical Applications

The potential of nanoparticles as effective drug delivery systems combined with the versatility of fibers has led to the development of new and improved strategies to help in the diagnosis and treatment of diseases. Nanoparticles have extraordinary characteristics that are helpful in several applications, including wound dressings, microbial balance approaches, tissue regeneration, and cancer treatment. Owing to their large surface area, tailor-ability, and persistent diameter, fibers are also used for wound dressings, tissue engineering, controlled drug delivery, and protective clothing. The combination of nanoparticles with fibers has the power to generate delivery systems that have enhanced performance over the individual architectures. This review aims at illustrating the main possibilities and trends of fibers functionalized with nanoparticles, focusing on inorganic and organic nanoparticles and polymer-based fibers. Emphasis on the recent progress in the fabrication procedures of several types of nanoparticles and in the description of the most used polymers to produce fibers has been undertaken, along with the bioactivity of such alliances in several biomedical applications. To finish, future perspectives of nanoparticles incorporated within polymer-based fibers for clinical use are presented and discussed, thus showcasing relevant paths to follow for enhanced success in the field.

State of Innovation in Alginate-Based Materials

This review article presents past and current alginate-based materials in each application, showing the widest range of alginate's usage and development in the past and in recent years. The first segment emphasizes the unique characteristics of alginates and their origin. The second segment sets alginates according to their application based on their features and limitations. Alginate is a polysaccharide and generally occurs as water-soluble sodium alginate. It constitutes hydrophilic and anionic polysaccharides originally extracted from natural brown algae and bacteria. Due to its promising properties, such as gelling, moisture retention, and film-forming, it can be used in environmental protection, cosmetics, medicine, tissue engineering, and the food industry. The comparison of publications with alginate-based products in the field of environmental protection, medicine, food, and cosmetics in scientific articles showed that the greatest number was assigned to the environmental field (30,767) and medicine (24,279), whereas fewer publications were available in cosmetic (5692) and food industries (24,334). Data are provided from the Google Scholar database (including abstract, title, and keywords), accessed in May 2023. In this review, various materials based on alginate are described, showing detailed information on modified composites and their possible usage. Alginate's application in water remediation and its significant value are highlighted. In this study, existing knowledge is compared, and this paper concludes with its future prospects.

Formation of substituted dioxanes in the oxidation of gum arabic with periodate

Renewable polysaccharide feedstocks are of interest in bio-based food packaging, coatings and hydrogels. Their physical properties often need to be tuned by chemical modification, e.g. by oxidation using periodate, to introduce carboxylic acid, ketone or aldehyde functional groups. The reproducibility required for application on an industrial scale, however, is challenged by uncertainty about the composition of product mixtures obtained and of the precise structural changes that the reaction with periodate induces. Here, we show that despite the structural diversity of gum arabic, primarily rhamnose and arabinose subunits undergo oxidation, whereas (in-chain) galacturonic acids are unreactive towards periodate. Using model sugars, we show that periodate preferentially oxidises the anti 1,2-diols in the rhamnopyranoside monosaccharides present as terminal groups in the biopolymer. While formally oxidation of vicinal diols results in the formation of two aldehyde groups, only traces of aldehydes are observed in solution, with the main final products obtained being substituted dioxanes, both in solution and in the solid state. The substituted dioxanes form most likely by the intramolecular reaction of one aldehyde with a nearby hydroxyl group, followed by hydration of the remaining aldehyde to form a geminal diol. The absence of significant amounts of aldehyde functional groups in the modified polymer impacts crosslinking strategies currently attempted in the preparation of renewable polysaccharide-based materials.

Preparation of combined hydrogel solution that is suitable to control the emission of odor pollutants from brownfield site and its control effects

Odor pollution caused by brownfield site has attracted increasing attention. However, to date, fewer suitable materials can be used to control the emission of odor pollutant from brownfield site during remediation. This study prepared a kind of combined hydrogel solution based on sodium alginate and carboxymethyl cellulose sodium (CHS-SC) and tested the possibility of its membrane in controlling the emission of three odor pollutants (trichloroethylene, dimethyl disulfide, and p-xylene) from polluted soil. Our results showed that CHS-SC membrane could effectively control the emission of three odor pollutants from polluted soil. Comparatively, CHS-SC membrane had higher control rates for three odor pollutants at high ambient temperature (32 °C), short storage time of CHS-SC (5 days, 25 °C), and low odor pollutant concentration (2 ml/kg soil) than at low ambient temperature (2 °C), long storage time of CHS-SC (10 d, 25 °C), and high odor pollutant concentration (4 ml/kg soil), respectively. CHS-SC membrane was degraded by 79.23% after 150 days in soil and slightly changed soil bacterial community, indicating that it had good biodegradability and environmental friendliness. In addition, CHS-SC cost was the lowest among the products with similar function. This study shows that CHS-SC is effective in short-timely controlling the emission of odor pollutants from brownfield site.

Mechanical Performance and Cytotoxicity of an Alginate/Polyacrylamide Bipolymer Network Developed for Medical Applications

Several hydrogels could be used as scaffolds for tissue engineering and a model of extracellular matrices for biological studies. However, the scope of alginate in medical applications is often severely limited by its mechanical behavior. In the present study, the modification of the mechanical properties of the alginate scaffold is obtained by its combination with polyacrylamide in order to obtain a multifunctional biomaterial. The advantage of this double polymer network is due to an improvement in the mechanical strength with regard to the alginate alone, and in particular, its Young's modulus values. The morphological study of this network was carried out by scanning electron microscopy (SEM). The swelling properties were also studied over several time intervals. In addition to mechanical property requirements, these polymers must meet several biosafety parameters as part of an overall risk management strategy. Our preliminary study illustrates that the mechanical property of this synthetic scaffold depends on the ratio of the two polymers (alginate, polyacrylamide) which allows us to choose the appropriate ratio to mimic replaceable body tissue and be used in various biological and medical uses, including 3D cell culture, tissue engineering, and protection against local shocks.

Rheological and Self-Healing Behavior of Hydrogels Synthesized from l-Lysine-Functionalized Alginate Dialdehyde

Alginate dialdehyde and l-lysine-functionalized alginate dialdehyde were prepared to provide active aldehyde and l-lysine sites along the alginate backbone, respectively. Different concentrations of substrates and the reduction agent were added, and their influence on the degree of l-lysine substitution was evaluated. An amination reduction reaction (with l-lysine) was conducted on alginate dialdehyde with a 31% degree of oxidation. The NMR confirmed the presence of l-lysine functionality with the degree of substitution of 20%. The structural change of the polymer was observed via FTIR spectroscopy, confirming the formation of Schiff base covalent linkage after the crosslinking. The additional l-lysine sites on functionalized alginate dialdehyde provide more crosslinking sites on the hydrogel, which leads to a higher modulus storage rate than in the original alginate dialdehyde. This results in dynamic covalent bonds, which are attributed to the alginate derivative-gelatin hydrogels with shear-thinning and self-healing properties. The results suggested that the concentration and stoichiometric ratio of alginate dialdehyde, l-lysine-functionalized alginate dialdehyde, and gelatin play a fundamental role in the hydrogel's mechanical properties.

Dual crosslinked injectable protein-based hydrogels with cell anti-adhesive properties

Currently, one of the most severe clinical concerns is post-surgical tissue adhesions. Using films or hydrogel to separate the injured tissue from surrounding tissues has proven the most effective method for minimizing adhesions. Therefore, by combining dual crosslinking with calcium ions (Ca²⁺) and tetrakis(hydroxymethyl) phosphonium chloride, we were able to create a novel, stable, robust, and injectable dual crosslinking hydrogel using albumin (BSA). This dual crosslinking has preserved the microstructure of the hydrogel network during the degradation process, which contributes to the hydrogel's mechanical strength and stability in a physiological situation. At 60% strain, compressive stress was 48.81 kPa obtained. It also demonstrated excellent self-healing characteristics (within 25 min), tissue adhesion, excellent cytocompatibility, and a quick gelling time of 27 ± 6 s. Based on these features, the dual crosslinked injectable hydrogels might find exciting applications in biomedicine, particularly for preventing post-surgical adhesions.

Partially Oxidized Alginate as a Biodegradable Carrier for Glucose-Responsive Insulin Delivery and Islet Cell Replacement Therapy

Self-regulated insulin delivery that mimics native pancreas function has been a long-term goal for diabetes therapies. Two approaches towards this goal are glucose-responsive insulin delivery and islet cell transplantation therapy. Here, biodegradable, partially oxidized alginate carriers for glucose-responsive nanoparticles or islet cells are developed. Material composition and formulation are tuned in each of these contexts to enable glycemic control in diabetic mice. For injectable, glucose-responsive insulin delivery, 0.5 mm 2.5% oxidized alginate microgels facilitate repeat dosing and consistently provide 10 days of glycemic control. For islet cell transplantation, 1.5 mm capsules comprised of a blend of unoxidized and 2.5% oxidized alginate maintain cell viability and glycemic control over a period of more than 2 months while reducing the volume of nondegradable material implanted. These data show the potential of these biodegradable carriers for controlled drug and cell delivery for the treatment of diabetes with limited material accumulation in the event of multiple doses.

Injectable FHE+BP composites hydrogel with enhanced regenerative capacity of tendon-bone interface for anterior cruciate ligament reconstruction

Features of black phosphorous (BP) nano sheets such as enhancing mineralization and reducing cytotoxicity in bone regeneration field have been reported. Thermo-responsive FHE hydrogel (mainly composed of oxidized hyaluronic acid (OHA), poly-ε-L-lysine (ε-EPL) and F127) also showed a desired outcome in skin regeneration due to its stability and antibacterial benefits. This study investigated the application of BP-FHE hydrogel in anterior cruciate ligament reconstruction (ACLR) both in in vitro and in vivo, and addressed its effects on tendon and bone healing. This BP-FHE hydrogel is expected to bring the benefits of both components (thermo-sensitivity, induced osteogenesis and easy delivery) to optimize the clinical application of ACLR and enhance the recovery. Our in vitro results confirmed the potential role of BP-FHE via significantly increased rBMSC attachment, proliferation and osteogenic differentiation with ARS and PCR analysis. Moreover, In vivo results indicated that BP-FHE hydrogels can successfully optimize the recovery of ACLR through enhancing osteogenesis and improving the integration of tendon and bone interface. Further results of Biomechanical testing and Micro-CT analysis [bone tunnel area (mm2) and bone volume/total volume (%)] demonstrated that BP can indeed accelerate bone ingrowth. Additionally, histological staining (H&E, Masson and Safranin O/fast green) and immunohistochemical analysis (COL I, COL III and BMP-2) strongly supported the ability of BP to promote tendon-bone healing after ACLR in murine animal models.

An injectable and self-healing cellulose nanofiber-reinforced alginate hydrogel for bone repair

Biomedical materials are in high demand for transplantation in cases of diseased or damaged bone tissue. Hydrogels are potential candidates for bone defect repair; however, traditional hydrogels lack the necessary strength and multiple functions. Herein, we effectively synthesized a cellulose nanofiber (CNF)-reinforced oxidized alginate (OSA)/gelatin (Gel) semi-interpenetrating network hydrogel through a facile one-step approach without a cross-linker by using the synergistic effects of dynamic imine bonds and hydrogen bonds. The OSA/Gel/CNF sample showed a notable compressive modulus (up to 361.3 KPa). The gelation time (~150 s) ensured excellent injectability. Self-healing exhibited a high efficiency of up to 92 %, which would enable minimally invasive, dynamic adjustments and personalized therapies. Furthermore, the OSA/Gel/CNF hydrogel showed excellent biomineralization (Ca/P ratio ~ 1.69) and enhanced preosteoblast cell (MC3T3-E1) viability (over 96 %), proliferation, and osteogenic differentiation. Thus, this multifunctional hydrogel has promising potential for using in the bone tissue repairs.

Dynamic Double Cross-Linked Self-Healing Polysaccharide Hydrogel Wound Dressing Based on Schiff Base and Thiol-Alkynone Reactions

In this study, a hydrogel composite wound dressing with antibacterial and self-healing ability was prepared using cysteine-modified carboxymethyl chitosan, sodium oxidized alginate, and but-3-yn-2-one base on Schiff base and thiol-alkynone double cross-links. The structure and properties of the hydrogel were characterized by scanning electron microscope, Fourier-transform infrared, and rheological test, followed by antibacterial and in vivo biocompatibility tests. The results showed that the hydrogel exhibited good self-healing, mechanical properties, good antibacterial effect, and in vivo biocompatibility, and can inhibit inflammation and promote skin tissue regeneration in mice. This novel self-healing hydrogel dressing has a broad application prospect in skin tissue engineering.

Hemostatic Cryogels Based on Oxidized Pullulan/Dopamine with Potential Use as Wound Dressings

The impetus for research into hydrogels based on selectively oxidized polysaccharides has been stimulated by the diversity of potential biomedical applications. Towards the development of a hemostatic wound dressing in this study, we creatively combined the (hemi)acetal and Schiff base bonds to prepare a series of multifunctional cryogels based on dialdehyde pullulan and dopamine. The designed structures were verified by NMR and FTIR spectroscopy. Network parameters and dynamic sorption studies were correlated with environmental scanning microscopy results, thus confirming the successful integration of the two components and the opportunities for finely tuning the structure-properties balance. The viscoelastic parameters (storage and loss moduli, complex and apparent viscosities, zero shear viscosity, yield stress) and the structural recovery capacity after applying a large deformation were determined and discussed. The mechanical stability and hemostatic activity suggest that the optimal combination of selectively oxidized pullulan and dopamine can be a promising toolkit for wound management.

Microcarriers in application for cartilage tissue engineering: Recent progress and challenges

Successful regeneration of cartilage tissue at a clinical scale has been a tremendous challenge in the past decades. Microcarriers (MCs), usually used for cell and drug delivery, have been studied broadly across a wide range of medical fields, especially the cartilage tissue engineering (TE). Notably, microcarrier systems provide an attractive method for regulating cell phenotype and microtissue maturations, they also serve as powerful injectable carriers and are combined with new technologies for cartilage regeneration. In this review, we introduced the typical methods to fabricate various types of microcarriers and discussed the appropriate materials for microcarriers. Furthermore, we highlighted recent progress of applications and general design principle for microcarriers. Finally, we summarized the current challenges and promising prospects of microcarrier-based systems for medical applications. Overall, this review provides comprehensive and systematic guidelines for the rational design and applications of microcarriers in cartilage TE.

Mussel-inspired polysaccharide-based sponges for hemostasis and bacteria infected wound healing

Effective bleeding control and wound protecting from infection play critical roles in the tissue healing process. However, local hemostats are not involved in the whole healing processes to promote the final healing efficiency. Here, a multi-functional mussel-inspired polysaccharide-based sponge with hemostatic, antibacterial and adhesive properties was fabricated via cryopolymerization of oxidized dextran (OD), carboxymethyl chitosan (CC) and polydopamine nanoparticles (PDA-NPs), followed by lyophilization. Combining with the adsorbed thrombin, the sponges yielded a considerably lower amount of blood than the commercially available hemostatic dressings. Benefiting from the high photo-thermal transition efficiency of PDA-NPs, the sponges exhibited excellent antibacterial activity to both gram positive and negative bacteria. Owing to the rapid hemostatic activity and effective infection resistance, the sponges illustrated the significantly acceleratory wound healing efficiency compared with the control group. The thrombin-loaded OD/CC-PDA polysaccharide-based sponge has great potential for future clinical use as wound dressing.

The Design of Rapid Self-Healing Alginate Hydrogel with Dendritic Crosslinking Network

Self-healing alginate hydrogels play important roles in the biological field due to their biocompatibility and ability to recover after cracking. One of the primary targets for researchers in this field is to increase the self-healing speed. Sodium alginate was oxidized, generating aldehyde groups on the chains, which were then crosslinked by poly(amino) amine (PAMAM) via Schiff base reaction. The dendritic structure was introduced to the alginate hydrogel in this work, which was supposed to promote intermolecular interactions and accelerate the self-healing process. Results showed that the hydrogel (ADA-PAMAM) formed a gel within 2.5 min with stable rheological properties. Within 25 min, the hydrogel recovered under room temperature. Furthermore, the aldehyde degree of alginate dialdehyde with a different oxidation degree was characterized through gel permeation chromatograph aligned with multi-angle laser light scattering and ultraviolet (UV) absorption. The chemical structure of the hydrogel was characterized through Fourier transform infrared spectroscopy and UV-vis spectra. The SEM and laser scanning confocal microscope (CLSM) presented the antibiotic ability of ADA-PAMAM against both S. aureus and E. coli when incubated with 10-7 CFU microorganism under room temperature for 2 h. This work presented a strategy to promote the self-healing of hydrogel through forming a dendritic dynamic crosslinking network.

Potential of a Composite Conduit with Bacterial Nanocellulose and Fish Gelatin for Application as Small-Diameter Artificial Blood Vessel

Bacterial nanocellulose (BNC) has received great attention for application as an artificial blood vessel material. However, many results showed that pristine BNC could not perfectly meet all the demands of blood vessels, especially for rapid endothelialization. In order to improve the properties of small-caliber vessels, different concentrations of fish gelatin (Gel) were deposited into the 3D network tubes and their properties were explored. The BNC/Gel composite tubes were treated with glutaraldehyde to crosslink BNC and fish gelatin. Compared with pristine BNC tubes, the BNC/Gel tubes had a certain improvement in mechanical properties. In vitro cell culture demonstrated that the human endothelial cells (HUVECs) and human smooth muscle cells (HSMCs) planted on the internal walls of BNC/Gel tubes showed better adhesion, higher proliferation and differentiation potential, and a better anticoagulation property, as compared to the cells cultured on pristine BNC tubes. Whole-blood coagulation experiments showed that the BNC/Gel tube had better properties than the BNC tube, and the hemolysis rate of all samples was less than 1.0%, satisfying the international standards for medical materials. An increase in the content of fish gelatin also increased the mechanical properties and the biocompatibility of small-caliber vessels. Considering the properties of BNC/Gel tubes, 1.0 wt/v% was selected as the most appropriate concentration of fish gelatin for a composite.

In situ Hydrogels for Effective Treatment of Cancer: Strategies and Polymers Used

Cancer is a worldwide health ailment with no known boundaries in terms of mortality and occurrence rates, thus is one of the biggest threats to humankind. Hence, there is an absolute need to develop novel therapeutics to bridge the infirmities associated with chemotherapy and conventional surgical methodologies including impairment of normal tissue, compromised drug efficiency and an escalation in side effects. In lieu of this, there's been a surge in curiosity towards development of injectable hydrogels for cancer therapy because local administration of the active pharmaceutical agent offers encouraging advantages such as providing higher effective dose at target site, prolonged retention time of drug, ease of administration, mitigation of dose in vivo ,improved patient compliance. Furthermore, due to its biocompatible nature such systems can significantly reduce the side effects that occur on long-term exposure to chemotherapy. The present review details the most recent advancements in in-situ gel forming polymers (natural and synthetic), polymeric cross-linking methodologies and in-situ gelling mechanisms, focusing on their clinical benefits in cancer therapy.

Synthesis and characterization of protocatechuic acid grafted carboxymethyl chitosan with oxidized sodium alginate hydrogel through the Schiff's base reaction

Excessive accumulation of free radicals is closely related to the occurrence and development of various neurodegenerative diseases. In this study, a novel protocatechuic acid grafted carboxymethyl chitosan with oxidized sodium alginate (PCA-g-CMCS/OSA) hydrogel was developed to maintain the oxidation-antioxidation balance activities. By optimizing the pH-soluble range (pH > 6.4) of CMCS, PCA was grafted onto CMCS skeleton via EDC/NHS, and then conjugated with aldehyde group of OSA to form Schiff's base hydrogel at physiological temperature. The gelation time can be adjusted rapidly within 1-3 min by controlling the content of OSA. The shaped hydrogel exhibited porous network structure with high porosity (>90 %), swelling ratio (2000-3000 %) and rheological property, which is beneficial to cell growth and proliferation. The conjugates preserved excellent DPPH and ABTS radicals scavenging abilities and adequate biodegradability within 5 weeks. Moreover, with the release of PCA monomer due to degradation of the PCA-g-CMCS/OSA, the hydrogel also exhibited excellent biocompatibility and protective effect on H2O2-induced oxidative damage in PC12 cells. These results suggested that the PCA-g-CMCS/OSA hydrogel would appear to be a more attractive candidate for potential biomedical applications such as antioxidant drug release and tissue engineering implant material.

In-situ forming hydrogel based on thiolated chitosan/carboxymethyl cellulose (CMC) containing borate bioactive glass for wound healing

Suitable wound dressings for accelerating wound healing are actively being designed and synthesised. In this study, thiolated chitosan (tCh)/oxidized carboxymethyl cellulose (OCMC) hydrogel containing Cu-doped borate bioglass (BG) was developed as a wound dressing to improve wound healing in a full-thickness skin defect of mouse animal model. Thiolation was used to incorporate thiol groups into chitosan (Ch) to enhance its water solubility and mucoadhesion characteristics. Here, the in situ forming hydrogel was successfully developed using the Schiff-based reaction, and its physio-chemical and antibacterial characteristics were examined. Borate BG was also incorporated in the generated hydrogel to promote angiogenesis and tissue regeneration at the wound site. Investigations of in vitro cytotoxicity assays demonstrated that the synthesised hydrogels showed good biocompatibility and promoted cell growth. These results inspired us to investigate the effectiveness of skin wound healing in a mouse model. On the backs of animals, two full-thickness wounds were created and treated utilising two different treatment conditions: (1) OCMC/tCh hydrogel, (2) OCMC/tCh/borate BG, and (3) control defect. The wound closure ratio, collagen deposition, and angiogenesis activity were measured after 14 days to determine the healing efficacy of the in situ hydrogels used as wound dressings. Overall, the hydrogel containing borate BG was maintained in the defect site, healing efficiency was replicable, and wound healing was apparent. In conclusion, we found consistent angiogenesis, remodelling, and accelerated wound healing, which we propose may have beneficial effects on the repair of skin defects.

Application of Nano-Inspired Scaffolds-Based Biopolymer Hydrogel for Bone and Periodontal Tissue Regeneration

This review’s objectives are to provide an overview of the various kinds of biopolymer hydrogels that are currently used for bone tissue and periodontal tissue regeneration, to list the advantages and disadvantages of using them, to assess how well they might be used for nanoscale fabrication and biofunctionalization, and to describe their production processes and processes for functionalization with active biomolecules. They are applied in conjunction with other materials (such as microparticles (MPs) and nanoparticles (NPs)) and other novel techniques to replicate physiological bone generation more faithfully. Enhancing the biocompatibility of hydrogels created from blends of natural and synthetic biopolymers can result in the creation of the best scaffold match to the extracellular matrix (ECM) for bone and periodontal tissue regeneration. Additionally, adding various nanoparticles can increase the scaffold hydrogel stability and provide a number of biological effects. In this review, the research study of polysaccharide hydrogel as a scaffold will be critical in creating valuable materials for effective bone tissue regeneration, with a future impact predicted in repairing bone defects.

High efficiency of in-situ cross-linking and acid triggered drug delivery by introducing tobramycin into injectable and biodegradable hydrogels

High efficiency of in-situ cross-linking and acid triggered drug delivery is realized by introducing tobramycin into the hydrogels. Injectable and biodegradable hydrogels are prepared through two steps: First generation of reactive aldehyde groups in the sodium alginate (A-Alg) and then introduction of antibiotic tobramycin as cross-linker. Due to the formation of dynamic Schiff base bonds between the amino groups in tobramycin and aldehyde groups in A-Alg, the gelation of hydrogels can be realized immediately. Thus, tobramycin acts well as the first role cross-linker and the hydrogels containing tobramycin can be injected into the wound during the treatment. In addition, the acid from the decomposition of organic compounds by the bacteria can break the cross-linking points previously formed by tobramycin in the hydrogels. Therefore, tobramycin can be released and act as the second role model drug to kill the bacteria. Because the hydrogels network is broken, the release of tobramycin is more efficient than the traditional drug delivery from hydrogels by diffusion. Based on these unique properties, the present hydrogels containing tobramycin exhibit a good injectable and biodegradable capability. In addition, due to the existence of the reversible acid-labile linkages in the hydrogels, the hydrogels containing tobramycin are also self-healing, which additionally is favorable for the application of wound dressing. More importantly, the antibacterial hydrogels also demonstrate good biocompatibility in vitro and significantly therapeutic effects on an infected mice model in vivo. Based on the above special properties, the hydrogels cross-linked by tobramycin indicate a new approach to prepare hydrogel dressings with low-cost, non-toxicity and good anti-bacterial performance in the treatment of infectious wounds.

Alginate-Based Composites for Corneal Regeneration: The Optimization of a Biomaterial to Overcome Its Limits

For many years, corneal transplantation has been the first-choice treatment for irreversible damage affecting the anterior part of the eye. However, the low number of cornea donors and cases of graft rejection highlighted the need to replace donor corneas with new biomaterials. Tissue engineering plays a fundamental role in achieving this goal through challenging research into a construct that must reflect all the properties of the cornea that are essential to ensure correct vision. In this review, the anatomy and physiology of the cornea are described to point out the main roles of the corneal layers to be compensated and all the requirements expected from the material to be manufactured. Then, a deep investigation of alginate as a suitable alternative to donor tissue was conducted. Thanks to its adaptability, transparency and low immunogenicity, alginate has emerged as a promising candidate for the realization of bioengineered materials for corneal regeneration. Chemical modifications and the blending of alginate with other functional compounds allow the control of its mechanical, degradation and cell-proliferation features, enabling it to go beyond its limits, improving its functionality in the field of corneal tissue engineering and regenerative medicine.

Self-Crosslinkable Oxidized Alginate-Carboxymethyl Chitosan Hydrogels as an Injectable Cell Carrier for In Vitro Dental Enamel Regeneration

Injectable hydrogels, as carriers, offer great potential to incorporate cells or growth factors for dental tissue regeneration. Notably, the development of injectable hydrogels with appropriate structures and properties has been a challenging task, leaving much to be desired in terms of cytocompatibility, antibacterial and self-healing properties, as well as the ability to support dental stem cell functions. This paper presents our study on the development of a novel self-cross-linkable hydrogel composed of oxidized alginate and carboxymethyl chitosan and its characterization as a cell carrier for dental enamel regeneration in vitro. Oxidized alginate was synthesized with 60% theoretical oxidation degree using periodate oxidation and characterized by Fourier Transform Infrared spectroscopy, proton nuclear magnetic resonance spectroscopy, and Ultraviolet-visible absorption spectroscopy. Then, hydrogels were prepared at three varying weight ratios of oxidized alginate to carboxymethyl chitosan (4:1, 3:1, and 2:1) through Schiff base reactions, which was confirmed by Fourier Transform Infrared spectroscopy. The hydrogels were characterized in terms of gelation time, swelling ratio, structure, injectability, self-healing, antibacterial properties, and in vitro characterization for enamel regeneration. The results demonstrated that, among the three hydrogels examined, the one with the highest ratio of oxidized alginate (i.e., 4:1) had the fastest gelation time and the lowest swelling ability, and that all hydrogels were formed with highly porous structures and were able to be injected through a 20-gauge needle without clogging. The injected hydrogels could be rapidly reformed with the self-healing property. The hydrogels also showed antibacterial properties against two cariogenic bacteria: Streptococcus mutans and Streptococcus sobrinus. For in vitro enamel regeneration, a dental epithelial cell line, HAT-7, was examined, demonstrating a high cell viability in the hydrogels during injection. Furthermore, HAT-7 cells encapsulated in the hydrogels showed alkaline phosphatase production and mineral deposition, as well as maintaining their round morphology, after 14 days of in vitro culture. Taken together, this study has provided evidence that the oxidized alginate-carboxymethyl chitosan hydrogels could be used as an injectable cell carrier for dental enamel tissue engineering applications.

Nanostructured particles assembled from natural building blocks for advanced therapies

Advanced treatments based on immune system manipulation, gene transcription and regulation, specific organ and cell targeting, and/or photon energy conversion have emerged as promising therapeutic strategies against a range of challenging diseases. Naturally derived macromolecules (e.g., proteins, lipids, polysaccharides, and polyphenols) have increasingly found use as fundamental building blocks for nanostructured particles as their advantageous properties, including biocompatibility, biodegradability, inherent bioactivity, and diverse chemical properties make them suitable for advanced therapeutic applications. This review provides a timely and comprehensive summary of the use of a broad range of natural building blocks in the rapidly developing field of advanced therapeutics with insights specific to nanostructured particles. We focus on an up-to-date overview of the assembly of nanostructured particles using natural building blocks and summarize their key scientific and preclinical milestones for advanced therapies, including adoptive cell therapy, immunotherapy, gene therapy, active targeted drug delivery, photoacoustic therapy and imaging, photothermal therapy, and combinational therapy. A cross-comparison of the advantages and disadvantages of different natural building blocks are highlighted to elucidate the key design principles for such bio-derived nanoparticles toward improving their performance and adoption. Current challenges and future research directions are also discussed, which will accelerate our understanding of designing, engineering, and applying nanostructured particles for advanced therapies.