Stem cell attachment to layer-by-layer assembled TiO2 nanoparticle thin films

A Retina-Inspired Optoelectronic Synapse Using Quantum Dots for Neuromorphic Photostimulation of Neurons

Neuromorphic electronics, inspired by the functions of neurons, have the potential to enable biomimetic communication with cells. Such systems require operation in aqueous environments, generation of sufficient levels of ionic currents for neurostimulation, and plasticity. However, their implementation requires a combination of separate devices, such as sensors, organic synaptic transistors, and stimulation electrodes. Here, a compact neuromorphic synapse that combines photodetection, memory, and neurostimulation functionalities all-in-one is presented. The artificial photoreception is facilitated by a photovoltaic device based on cell-interfacing InP/ZnS quantum dots, which induces photo-faradaic charge-transfer mediated plasticity. The device sends excitatory post-synaptic currents exhibiting paired-pulse facilitation and post-tetanic potentiation to the hippocampal neurons via the biohybrid synapse. The electrophysiological recordings indicate modulation of the probability of action potential firing due to biomimetic temporal summation of excitatory post-synaptic currents. The results pave the way for the development of novel bioinspired neuroprosthetics and soft robotics and highlight the potential of quantum dots for achieving versatile neuromorphic functionality in aqueous environments.

A Retina-Inspired Optoelectronic Synapse Using Quantum Dots for Neuromorphic Photostimulation of Neurons

Neuromorphic electronics, inspired by the functions of neurons, have the potential to enable biomimetic communication with cells. Such systems require operation in aqueous environments, generation of sufficient levels of ionic currents for neurostimulation, and plasticity. However, their implementation requires a combination of separate devices, such as sensors, organic synaptic transistors, and stimulation electrodes. Here, a compact neuromorphic synapse that combines photodetection, memory, and neurostimulation functionalities all-in-one is presented. The artificial photoreception is facilitated by a photovoltaic device based on cell-interfacing InP/ZnS quantum dots, which induces photo-faradaic charge-transfer mediated plasticity. The device sends excitatory post-synaptic currents exhibiting paired-pulse facilitation and post-tetanic potentiation to the hippocampal neurons via the biohybrid synapse. The electrophysiological recordings indicate modulation of the probability of action potential firing due to biomimetic temporal summation of excitatory post-synaptic currents. These results pave the way for the development of novel bioinspired neuroprosthetics and soft robotics, and highlight the potential of quantum dots for achieving versatile neuromorphic functionality in aqueous environments.

Antifouling Behavior of Copper-Modified Titania Nanotube Surfaces

Titanium and its alloys are commonly used to fabricate orthopedic implants due to their excellent mechanical properties, corrosion resistance, and biocompatibility. In recent years, orthopedic implant surgeries have considerably increased. This has also resulted in an increase in infection-associated revision surgeries for these implants. To combat this, various approaches are being investigated in the literature. One of the approaches is modifying the surface topography of implants and creating surfaces that are not only antifouling but also encourage osteointegration. Titania nanotube surfaces have demonstrated a moderate decrease in bacterial adhesion while encouraging mesenchymal stem cell adhesion, proliferation, and differentiation, and hence were used in this study. In this work, titania nanotube surfaces were fabricated using a simple anodization technique. These surfaces were further modified with copper using a physical vapor deposition technique, since copper is known to be potent against bacteria once in contact. In this study, scanning electron microscopy was used to evaluate surface topography; energy-dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy were used to evaluate surface chemistry; contact angle goniometry was used to evaluate surface wettability; and X-ray diffraction was used to evaluate surface crystallinity. Antifouling behavior against a gram-positive and a gram-negative bacterium was also investigated. The results indicate that copper-modified titania nanotube surfaces display enhanced antifouling behavior when compared to other surfaces, and this may be a potential way to prevent infection in orthopedic implants.

Advances in Tissue Engineering of the Temporomandibular Joint Disc: An Overview of Current Status and Future Directions

Advances in tissue engineering have progressed to potentially offer a solution to temporomandibular joint disc (TMJ) disorders not amenable to conservative therapies. Conclusive treatment options for patients with end-stage disc disorders requires discectomy and reconstruction of the articular disc with various materials. Tissue engineering TMJ disc is a promising alternative to the limited and sometimes inadequate clinical options in the management of such disorders. However, tissue engineering is far from completion for the TMJ disc regeneration. This review briefly discusses the properties of native disc, the mechanism by which TMJ disorders manifest, and how a tissue engineered disc could assuage the problems inherent in the management of such disorders. Furthermore, the review addresses and provides updates to relevant themes of tissue engineering in regards to the TMJ disc, namely, the scaffolds, cells and biomarkers, hurdles in tissue engineering of the disc, and its application in translation to the clinical practice and future directions.

High-throughput and versatile design for multi-layer coating deposition using lab automation through Arduino-controlled devices

Laboratory and experimental scale manufacturing processes are limited by human error (e.g., poor control over motion and personal subjectivity), especially under fatiguing conditions involving precise, repetitive operations, incurring compounding errors. Commercial layer-by-layer (LbL) automation devices are prohibitively high-priced (especially for academic institutions) with limited flexibility in form factor and potentially software-associated constraints/limitations. In this work, a novel automated multi-beaker dip coater was fabricated to facilitate nano cerium oxide/polymer coatings via an LbL dip coating process and the synthesis of nano ceria films via a novel successive ionic layer adsorption and reaction method on a glass substrate. Automation of tasks, such as those mediating the detailed procedures, is essential in producing highly reproducible, consistent products/materials as well as in reducing the time commitments for laboratory researchers. Herein, we detail the construction of a relatively large, yet inexpensive, LbL coating instrument that can operate over 90 cm in the horizontal axis, allowing, for example, up to eight 200 ml beakers with accompanying stir plates. The instrument is operated by simple "off-the-shelf" electronics to control the path and timing of the samples with open-source software while providing precision at ±0.01 mm. Furthermore, 3D-printed components were used to maximize the number of substrates that could be coated simultaneously, further improving the sample production rate and reducing waste. Further possibilities for automation beyond the detailed device are provided and discussed, including software interfaces, physical control methods, and sensors for data collection/analysis or for triggers of automated tasks.

Research progress on tissue engineering in repairing tempomandibular joint

Temporomandibular joint osteoarthritis (TMJOA) is mainly manifested as perforation of temporomandibular joint disc (TMJD) and destruction of condylar osteochondral complex (COCC). In recent years, tissue engineering technology has become one of the effective strategies in repairing this damage. With the development of scaffold material technology, composite scaffolds have become an important means to optimize the performance of scaffolds with the combined advantages of natural materials and synthetic materials. The gelling method with the minimally invasive concept can greatly solve the problems of surgical trauma and material anastomosis, which is beneficial to the clinical transformation of temporomandibular joint tissue engineering. Extracellular matrix scaffolds technology can solve the problem of scaffold source and maximize the simulation of the extracellular environment, which provides an important means for the transformation of temporo joint tissue engineering to animal level. Due to the limitation of the source and amplification of costal chondrocytes, the use of mesenchymal stem cells from different sources has been widely used for temporomandibular joint tissue engineering. The fibrochondral stem cells isolated from surface layer of articular cartilage may provide one more suitable cell source. Transforming growth factor β superfamily, due to its osteochondrogenesis activity has been widely used in tissue engineering, and platelet-rich derivative as a convenient preparation of compound biological factor, gradually get used in temporomandibular joint tissue engineering. With the deepening of research on extracellular microenvironment and mechanical stimulation, mesenchymal stem cells, exosomes and stress stimulation are increasingly being used to regulate the extracellular microenvironment. In the future, the combination of complex bioactive factors and certain stress stimulation may become a trend in the temporomandibular joint tissue engineering research. In this article, the progress on tissue engineering in repairing COCC and TMJD, especially in scaffold materials, seed cells and bioactive factors, are reviewed, so as to provide information for future research design and clinical intervention.

Applicability of TiO2(B) nanosheets@hydrochar composites for adsorption of tetracycline (TC) from contaminated water

We test the feasibility of TiO₂(B)@carbon composites as adsorbents, derived from wheat straws, for tetracycline (TC) adsorption from aqueous solutions. Hydrochar (HC), biochar (BC), and hydrochar-derived pyrolysis char (HDPC) are synthesized hydrothermally from the waste and then functionalized with TiO₂(B), named as 'Composite-1', 'Composite-2', and 'Composite-3', respectively. A higher loading of TiO₂(B) into the HC was also synthesized for comparison, named as 'Composite-4'. To compare their physico-chemical changes before and after surface modification, the composites are characterized using FESEM-EDS, XRD, BET, FRTEM, and FTIR. The effects of H₂O₂ addition on TC removal are investigated. Adsorption kinetics and isotherms of TC removal are studied, while TC adsorption mechanisms are elaborated. We found that the Composite-4 has the highest TC removal (93%) at pH 7, 1 g/L of dose, and 4 h of reaction time at 50 mg/L of TC after adding H₂O₂ (10 mM). The TC adsorption capacities of the Composite-1 and Composite-4 are 40.65 and 49.26 mg/g, respectively. The TC removal by the Composite-1 follows the pseudo-second order. Overall, this suggests that converting the wheat straw into HC and then functionalizing its surface with TiO₂(B) as a composite has added values to the waste as an adsorbent for wastewater treatment.

Therapeutic Agents for the Treatment of Temporomandibular Joint Disorders: Progress and Perspective

Temporomandibular joint disorders (TMD) are a common health condition caused by the structural or functional disorders of masticatory muscles and the temporomandibular joint (TMJ). Abnormal mandibular movement in TMD patients may cause pain, chronic inflammation, and other discomfort, which could be relieved by a variety of drugs through various delivery systems. In this study, we summarized commonly used therapeutic agents in the management of TMD as well as novel bioactive molecules in preclinical stage and clinical trials. The emerging therapy strategies such as novel intra-TMJ delivery systems and implants based on tissue engineering are also discussed. This comprehensive review will strengthen our understanding of pharmacological approaches for TMD therapy.

Osteoconductive and osteoinductive biodegradable microspheres serving as injectable micro-scaffolds for bone regeneration

There are intensive needs for scaffolds with new designs to meet the diverse requirements of bone repairing. Biodegradable microspheres are highlighted as injectable micro-scaffolds thanks to their advantages in filling irregular defects via a minimally invasive surgery. In this study, microspheres with surface micropores were made via the W1/O/W2 double emulsion method using amphiphilic triblock copolymers (PLLA-PEG-PLLA) composed of poly(L-lactide) (PLLA) and poly(ethylene glycol) (PEG) segments. When the PEG fraction was controlled as 10 wt.%, the microspheres demonstrated higher cell affinity than the smooth-surfaced PLLA microspheres. After being further functionalized with polydopamine coating and apatite deposition, the PLLA-PEG-PLLA microspheres could up-regulate the osteogenic differentiation of bone marrow mesenchymal stromal cells (BMSCs) significantly. Before subcutaneous implantation, bone morphogenetic protein-2 (BMP-2) was adsorbed onto the biomineralized microspheres by taking advantages of the strong affinity of apatite to BMP-2. The resulted microspheres induced ectopic osteogenesis efficiently without causing biocompatibility problems. In summary, this study provided a simple strategy to prepare functionalized microspheres with osteoconductivity and osteoinductivity, which showed great potential in promoting bone regeneration as injectable micro-scaffolds.

Influence of Titanium Oxide Pillar Array Nanometric Structures and Ultraviolet Irradiation on the Properties of the Surface of Dental Implants-A Pilot Study

Aim: Titanium implants are commonly used as replacement therapy for lost teeth and much current research is focusing on the improvement of the chemical and physical properties of their surfaces in order to improve the osseointegration process. TiO₂, when it is deposited in the form of pillar array nanometric structures, has photocatalytic properties and wet surface control, which, together with UV irradiation, provide it with superhydrophilic surfaces, which may be of interest for improving cell adhesion on the peri-implant surface. In this article, we address the influence of this type of surface treatment on type IV and type V titanium discs on their surface energy and cell growth on them. Materials and methods: Samples from titanium rods used for making dental implants were used. There were two types of samples: grade IV and grade V. In turn, within each grade, two types of samples were differentiated: untreated and treated with sand blasting and subjected to double acid etching. Synthesis of the film consisting of titanium oxide pillar array structures was carried out using plasma-enhanced chemical vapor deposition equipment. The plasma was generated in a quartz vessel by an external SLAN-1 microwave source with a frequency of 2.45 GHz. Five specimens from each group were used (40 discs in total). On the surfaces to be studied, the following determinations were carried out: (a) X-ray photoelectron spectroscopy, (b) scanning electron microscopy, (c) energy dispersive X-ray spectroscopy, (d) profilometry, (e) contact angle measurement or surface wettability, (f) progression of contact angle on applying ultraviolet irradiation, and (g) a biocompatibility test and cytotoxicity with cell cultures. Results: The application of ultraviolet light decreased the hydrophobicity of all the surfaces studied, although it did so to a greater extent on the surfaces with the studied modification applied, this being more evident in samples manufactured in grade V titanium. In samples made in grade IV titanium, this difference was less evident, and even in the sample manufactured with grade IV and SLA treatment, the application of the nanometric modification of the surface made the surface optically less active. Regarding cell growth, all the surfaces studied, grouped in relation to the presence or not of the nanometric treatment, showed similar growth. Conclusions. Treatment of titanium oxide surfaces with ultraviolet irradiation made them change temporarily into superhydrophilic ones, which confirms that their biocompatibility could be improved in this way, or at least be maintained.

Remaining Hurdles for Tissue-Engineering the Temporomandibular Joint Disc

The temporomandibular joint (TMJ) disc, a fibrocartilaginous structure between the mandible and temporal bone, is implicated in temporomandibular disorders (TMDs). TMDs symptomatically affect approximately 25% of the population, of which 70% have internal derangement of the disc. Treatments lack efficiency, motivating novel therapies, including tissue-engineering toward TMJ disc regeneration. Recent developments in scaffold-based or scaffold-free approaches, cell sources, and biochemical and mechanical stimulation have resulted in constructs exhibiting native tissue mechanics. Safety and efficacy of tissue-engineered implants have shown promising results in orthotopic animal studies. However, many hurdles need to be overcome in tissue-engineering approaches, and clinical and regulatory pathways. Future studies present an opportunity for clinicians and researchers to work together toward safe and effective clinical trials.

Topographical patterning: characteristics of current processing techniques, controllable effects on material properties and co-cultured cell fate, updated applications in tissue engineering, and improvement strategies

Topographical patterning has recently attracted lots of attention in regulating cell fate, understanding the mechanism of cell–microenvironment interactions, and solving the great issues of regenerative medicine.

Enantiomeric helical TiO2 nanofibers modulate different peptide assemblies and subsequent cellular behaviors

The effect of the morphological chirality of inorganic TiO₂ nanofibers on peptide assembly and cellular behaviors was investigated. Model peptide insulin maintains its native structure and served as a growth factor for promoting proliferation and differentiation of PC12 cells on the surface of right-handed TiO₂. In contrast, insulin forms amyloid fibrils and loses its bioactivity on the left-handed TiO₂.

Enantiomeric inorganic helical TiO₂ nanofibers directed the different assembly processes of insulin and subsequent cellular behaviors.

Impact of surface topography and coating on osteogenesis and bacterial attachment on titanium implants

Titanium (Ti) plays a predominant role as the material of choice in orthopaedic and dental implants. Despite the majority of Ti implants having long-term success, premature failure due to unsuccessful osseointegration leading to aseptic loosening is still too common. Recently, surface topography modification and biological/non-biological coatings have been integrated into orthopaedic/dental implants in order to mimic the surrounding biological environment as well as reduce the inflammation/infection that may occur. In this review, we summarize the impact of various Ti coatings on cell behaviour both in vivo and in vitro. First, we focus on the Ti surface properties and their effects on osteogenesis and then on bacterial adhesion and viability. We conclude from the current literature that surface modification of Ti implants can be generated that offer both osteoinductive and antimicrobial properties.

Fabrication of a biomimetic ZeinPDA nanofibrous scaffold impregnated with BMP-2 peptide conjugated TiO2 nanoparticle for bone tissue engineering

A biomimetic Zein polydopamine based nanofiber scaffold was fabricated to deliver bone morphogenic protein-2 (BMP-2) peptide conjugated titanium dioxide nanoparticles in a sustained manner for investigating its osteogenic differentiation potential. To prolong its retention time at the target site, BMP-2 peptide has been conjugated to titanium dioxide nanoparticles owing to its high surface to volume ratio. The effect of biochemical cues from BMP-2 peptide and nanotopographical stimulation of electrospun Zein polydopamine nanofiber were examined for its enhanced osteogenic expression of human fetal osteoblast cells. The sustained delivery of bioactive signals, improved cell adhesion, mineralization, and differentiation could be attributed to its highly interconnected nanofibrous matrix with unique material composition. Further, the expression of osteogenic markers revealed that the fabricated nanofibrous scaffold possess better cell-biomaterial interactions. These promising results demonstrate the potential of the composite nanofibrous scaffold as an effective biomaterial substrate for bone regeneration.

When stem cells meet graphene: Opportunities and challenges in regenerative medicine

Recent advances in stem cell research and nanotechnology have significantly influenced the landscape of tissue engineering and regenerative medicine. Precise and reproducible control of the fate of stem cells and their lineage specification have, therefore, become more crucial than ever for the success of stem cell-based technologies. Extensive research has been geared towards developing materials that are capable of mimicking the physiological microenvironment of stem cells and at the same time, controlling their eventual fate. An interesting example of these materials is two-dimensional graphene and its related derivatives. A high specific surface area coupled with superior chemical stability, biocompatibility, and flexibility in functionalization render graphene-based nanomaterials one of the most exciting platforms for tissue engineering and regenerative medicine applications, especially for stem cell growth, proliferation, and differentiation. In this review, we discuss the love-hate relationship between stem cells and graphene-based nanomaterials in tissue engineering and regenerative medicine. We first discuss the role and importance of stem cells in tissue engineering and regenerative medicine. We then highlight the use of nanomaterials for stem cell control, the interaction between stem cells and graphene nanomaterials as well as their biocompatibility, biodistribution, and biodegradability considerations. We also offer our perspectives on the various challenges and opportunities facing the use of graphene and its derivatives for stem cell growth and differentiation.

Antifouling Thermoplastic Composites with Maleimide Encapsulated in Clay Nanotubes

An antifouling ethylene-vinyl acetate copolymer (EVA) coating with halloysite clay nanotubes loaded with maleimide (TCPM) is prepared. Such antifoulant encapsulation allowed for extended release of TCPM and a long-lasting, efficient protection of the coated surface against marine microorganisms proliferation. Halloysite also induces the composite's anisotropy due to parallel alignment of the nanotubes. The maleimide loaded halloysite incorporated into the polymer matrix allowed for 12-month release of the bacterial inhibitor preventing fouling; it is much longer than the 2-3 month protection when TCPM is directly admixed into EVA. The antifouling properties of the EVA-halloysite nanocomposites were tested by monitoring surface adhesion and proliferation of marine V. natriegens bacteria with SEM. As compared to the composite directly doped with TCPM-antifoulant, there were much less bacteria accumulated on the EVA-halloysite-TCPM coating after a 2-month exposure to seawater. Field tests at South China Sea marine station further confirmed the formulation efficiency. The doping of 28 wt % TCPM loaded halloysite drastically enhanced material antifouling property, which promises wide applications for protective marine coating.

Covalently modified halloysite clay nanotubes: synthesis, properties, biological and medical applications

Halloysite (HNT) is a promising natural nanosized tubular clay mineral that has many important uses in different industrial fields.

In vitro mesenchymal stem cell response to a CO2 laser modified polymeric material

With an ageing world population it is becoming significantly apparent that there is a need to produce implants and platforms to manipulate stem cell growth on a pharmaceutical scale. This is needed to meet the socio-economic demands of many countries worldwide. This paper details one of the first ever studies in to the manipulation of stem cell growth on CO2 laser surface treated nylon 6,6 highlighting its potential as an inexpensive platform to manipulate stem cell growth on a pharmaceutical scale. Through CO2 laser surface treatment discrete changes to the surfaces were made. That is, the surface roughness of the nylon 6,6 was increased by up to 4.3μm, the contact angle was modulated by up to 5° and the surface oxygen content increased by up to 1atom %. Following mesenchymal stem cell growth on the laser treated samples, it was identified that CO2 laser surface treatment gave rise to an enhanced response with an increase in viable cell count of up to 60,000cells/ml when compared to the as-received sample. The effect of surface parameters modified by the CO2 laser surface treatment on the mesenchymal stem cell response is also discussed along with potential trends that could be identified to govern the mesenchymal stem cell response.

Localized committed differentiation of neural stem cells based on the topographical regulation effects of TiO2 nanostructured ceramics

In this study, a porous-flat TiO2 micropattern was fabricated with flat and nanoporous TiO2 ceramics for investigating the effect of topography on neural stem cell (NSC) differentiation. This finding demonstrates that localized committed differentiation could be achieved in one system by integrating materials with different topographies.

Fibrochondrocyte Growth and Functionality on TiO₂ Nanothin Films

Disorders affecting the temporomandibular joint (TMJ) are a long-standing health concern. TMJ disorders (TMJD) are often associated with an internal disc derangement accompanied by a suite of symptoms including joint noises, jaw dysfunction, and severe pain. The severity of patient symptoms and their reoccurrence can be alleviated to some extent with conservative therapy; however, refractory cases often require surgery that has shown only limited success. Bioengineered scaffolds with cell supportive surfaces an d nanoarchitectures that mimic TMJ tissue structure may offer an alternative treatment modality. In this study, titanium dioxide (TiO₂) nanothin films, fabricated by layer-by-layer assembly, were examined as means for creating such a scaffold. The viability and growth of TMJ discal fibrochondrocytes (FCs) were assessed through MTT and DNA assays and total protein content over a 14-day experimental period. ELISA was also used to measure expression of types I and II collagen, decorin and aggrecan. Quantitative analyses demonstrated that FCs synthesized characteristic discal matrix proteins, with an increased production of type I collagen and decorin as opposed to collagen type II and aggrecan. A stimulatory effect on discal FC proliferation and extracellular matrix (ECM) expression with thicker nanofilms was also observed. The cumulative results suggest that TiO₂ nanofilms may have potential as a TMJ scaffolding material.

Halloysite Clay Nanotubes for Loading and Sustained Release of Functional Compounds

Halloysite is an alumosilicate tubular clay with a diameter of 50 nm, an inner lumen of 15 nm and a length of 600-900 nm. It is a natural biocompatible nanomaterial available in thousands of tons at low price, which makes it a good candidate for nanoarchitectural composites. The inner lumen of halloysite may be adjusted by etching to 20-30% of the tube volume and loading with functional agents (antioxidants, anticorrosion agents, flame-retardant agents, drugs, or proteins) allowing for formulations with sustained release tuned by the tube end-stoppers for hours and days. Clogging the tube ends in polymeric composites allows further extension of the release time. Thus, antioxidant-loaded halloysite doped into rubber enhances anti-aging properties for at least 12 months. The addition of 3-5 wt% of halloysite increases the strength of polymeric materials, and the possibility of the tube's orientation promises a gradient of properties. Halloysite nanotubes are a promising mesoporous media for catalytic nanoparticles that may be seeded on the tube surface or synthesized exclusively in the lumens, providing enhanced catalytic properties, especially at high temperatures. In vitro and in vivo studies on biological cells and worms indicate the safety of halloysite, and tests for efficient adsorption of mycotoxins in animals' stomachs are also carried out.

Sustained Release of Antibacterial Agents from Doped Halloysite Nanotubes

The use of nanomaterials for improving drug delivery methods has been shown to be advantageous technically and viable economically. This study employed the use of halloysite nanotubes (HNTs) as nanocontainers, as well as enhancers of structural integrity in electrospun poly-e-caprolactone (PCL) scaffolds. HNTs were loaded with amoxicillin, Brilliant Green, chlorhexidine, doxycycline, gentamicin sulfate, iodine, and potassium calvulanate and release profiles assessed. Selected doped halloysite nanotubes (containing either Brilliant Green, amoxicillin and potassium calvulanate) were then mixed with poly-e-caprolactone (PLC) using the electrospinning method and woven into random and oriented-fibered nanocomposite mats. The rate of drug release from HNTs, HNTs/PCL nanocomposites, and their effect on inhibiting bacterial growth was investigated. Release profiles from nanocomposite mats showed a pattern of sustained release for all bacterial agents. Nanocomposites were able to inhibit bacterial growth for up to one-month with only a slight decrease in bacterial growth inhibition. We propose that halloysite doped nanotubes have the potential for use in a variety of medical applications including sutures and surgical dressings, without compromising material properties.

Titania nanostructures: a biomedical perspective

A systematic and comprehensive summary of various TNS-based biomedical research with a special emphasis on drug-delivery, tissue engineering, biosensor, and anti-bacterial applications.

3D-nanoflowers of rutile TiO2 as a film grown on conducting and non-conducting glass substrates for in vitro biocompatibility studies with mouse MC3T3 osteoblast and human HS-5 cells

Thin films of 3D-nanoflowers of rutile TiO₂ on conducting (FTO and ITO) and non-conducting (glass) substrates were grown using a surfactant free one-step hydrothermal process.

Microporous calcium phosphate ceramics driving osteogenesis through surface architecture

The presence of micropores in calcium phosphate (CaP) ceramics has shown its important role in initiating inductive bone formation in ectopic sites. To investigate how microporous CaP ceramics trigger osteoinduction, we optimized two biphasic CaP ceramics (i.e., BCP-R and BCP-S) to have the same chemical composition, equivalent surface area per volume, comparable protein adsorption, similar ion (i.e., calcium and phosphate) exchange and the same surface mineralization potential, but different surface architecture. In particular, BCP-R had a surface roughness (Ra) of 325.4 ± 58.9 nm while for BCP-S it was 231.6 ± 35.7 nm. Ceramic blocks with crossing or noncrossing channels of 250, 500, 1000, and 2000 µm were implanted in paraspinal muscle of dogs for 12 weeks. The percentage of bone volume in the channels was not affected by the type of pores (i.e., crossing vs. closed) or their size, but it was greatly influenced by the ceramic type (i.e., BCP-R vs. BCP-S). Significantly, more bone was formed in the channels of BCP-R than in those of BCP-S. Since the two CaP ceramics differed only in their surface architecture, the results hereby demonstrate that microporous CaP ceramics may induce ectopic osteogenesis through surface architecture.

Effect of laser treatment on the attachment and viability of mesenchymal stem cell responses on shape memory NiTi alloy

The objectives of this study were to investigate the effect of laser-induced surface features on the morphology, attachment and viability of mesenchymal stem cells (MSCs) at different periods of time, and to evaluate the biocompatibility of different zones: laser-melted zone (MZ), heat-affected zone (HAZ) and base metal (BM) in laser-treated NiTi alloy. The surface morphology and composition were studied by scanning electron microscope (SEM) and X-ray photoemission spectroscopy (XPS), respectively. The cell morphology was examined by SEM while the cell counting and viability measurements were done by hemocytometer and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) colorimetric assay. The results indicated that the laser-induced surface features, such as surface roughening, presence of anisotropic dendritic pattern and complete surface Ni oxidation were beneficial to improve the biocompatibility of NiTi as evidenced by the highest cell attachment (4 days of culture) and viability (7 days of culture) found in the MZ. The biocompatibility of the MZ was the best, followed by the BM with the HAZ being the worst. The defective and porous oxide layer as well as the coarse grained structure might attribute to the inferior cell attachment (4 days of culture) and viability (7 days of culture) on the HAZ compared with the BM which has similar surface morphology.

Clay nanotube encapsulation for functional biocomposites

Natural halloysite clay nanotubes with 50 nm outer- and 15 nm inner- diameters are described as miniature vehicles for sustained release of drugs and proteins. The release time may be adjusted from 10 to 200 h with the tube surface polymeric coating. An explanation of sustained release through locking electrical potential at the nanotube ends is suggested. These biocompatible ceramic tubes may be also used for architectural construction of nanoshells on microbes through alternation with polycations to enhance the intrinsic properties of biological cells. Halloysite nanotubes (pristine or drug-loaded) are well mixable with polar and low-polar polymers allowing for functional biocomposites with enhanced mechanical strength, adhesivity and slow release of drugs or other chemical agents. Halloysite is nontoxic abundantly available from natural deposit material which does not require exfoliation or other complicated energy consuming processing.

CaCO₃ templated micro-beads and -capsules for bioapplications

Porous CaCO₃ vaterite microparticles have been introduced a decade ago as sacrificial cores and becoming nowadays as one of the most popular templates to encapsulate bioactive molecules. This is due to the following beneficial features: i) mild decomposition conditions, ii) highly developed surface area, and iii) controlled size as well as easy and chip preparation. Such properties allow one to template and design particles with well tuned material properties in terms of composition, structure, functionality -- the parameters crucially important for bioapplications. This review presents a recent progress in utilizing the CaCO₃ cores for the assembly of micrometer-sized beads and capsules with encapsulated both small drugs and large biomacromolecules. Bioapplications of all the particles for drug delivery, biotechnology, and biosensing as well as future perspectives for templating are addressed.

Influence of dexamethasone-loaded TNTs on the proliferation and osteogenic differentiation of rat mesenchymal stem cells

Schematic illustration of cellular responses of rMSCs to Dex-loaded TNT arrays.

Modified Titanium Surfaces Alter Osteogenic Differentiation: A Comparative Microarray-Based Analysis of Human Mesenchymal Cell Response to Commercial Titanium Surfaces

The differential effects of dual-acid etched (Osseotite), hydroxyapatite coated (HA) and sand-blasted/acid-etched (SLA) titanium surfaces on human bone marrow-derived mesenchymal cells (hMSCs) were investigated. Proliferation was significantly promoted on the SLA surfaces. 16 genes were significantly upregulated when hMSCs were cultured on the Osseotite and the HA surfaces and 15 genes on the SLA surfaces. Upregulated genes control cell differentiation, signal transduction, cell cycle regulation, angiogenesis, cell adhesion, and extracellular matrix and bone formation.

Nonrandom adsorption of polyelectrolyte chains on finite regularly charged surfaces

Adsorption phenomena are relevant in a wide variety of subjects, from biophysics to technological applications. Different aspects, such as molecular recognition, multilayer deposition, and dynamics of polymer adsorption have been addressed. The methodologies used range from analytical and numerical methods to molecular dynamics or Monte Carlo simulations. In this work, a coarse-grained model is used to explore the adsorption of charged backbones to oppositely charged regions of a surface. These regions encompass those small enough to prevent complete adsorption, but extend to surfaces sufficiently large to promote adsorption with minimal effect on the three-dimensional conformation in bulk. Apart from the different surface areas explored, variations on the surface charge density, polyelectrolyte chain length, and chain stiffness were also considered. The degree of compaction of the polyelectrolyte, on adsorption, is different from that found in the bulk. Also, results indicate an nonuniform adsorption pattern on regularly charged surfaces.

Addition of nanoscaled bioinspired surface features: A revolution for bone related implants and scaffolds?

Our expanding ability to handle the "literally invisible" building blocks of our world has started to provoke a seismic shift on the technology, environment and health sectors of our society. During the last two decades, it has become increasingly evident that the "nano-sized" subunits composing many materials—living, natural and synthetic—are becoming more and more accessible for predefined manipulations at the nanosize scale. The use of equally nanoscale sized or functionalised tools may, therefore, grant us unprecedented prospects to achieve many therapeutic aims. In the past decade it became clear that nano-scale surface topography significantly influences cell behaviour and may, potentially, be utilised as a powerful tool to enhance the bioactivity and/ or integration of implanted devices. In this review, we briefly outline the state of the art and some of the current approaches and concepts for the future utilisation of nanotechnology to create biomimetic implantable medical devices and scaffolds for in vivo and in vitro tissue engineering,with a focus on bone. Based on current knowledge it must be concluded that not the materials and surfaces themselves but the systematic biological evaluation of these new material concepts represent the bottleneck for new biomedical product development based on nanotechnological principles.

Proteomic profiling of halloysite clay nanotube exposure in intestinal cell co-culture

Halloysite is aluminosilicate clay with a hollow tubular structure with nanoscale internal and external diameters. Assessment of halloysite biocompatibility has gained importance in view of its potential application in oral drug delivery. To investigate the effect of halloysite nanotubes on an in vitro model of the large intestine, Caco-2/HT29-MTX cells in monolayer co-culture were exposed to nanotubes for toxicity tests and proteomic analysis. Results indicate that halloysite exhibits a high degree of biocompatibility characterized by an absence of cytotoxicity, in spite of elevated pro-inflammatory cytokine release. Exposure-specific changes in expression were observed among 4081 proteins analyzed. Bioinformatic analysis of differentially expressed protein profiles suggest that halloysite stimulates processes related to cell growth and proliferation, subtle responses to cell infection, irritation and injury, enhanced antioxidant capability, and an overall adaptive response to exposure. These potentially relevant functional effects warrant further investigation in in vivo models and suggest that chronic or bolus occupational exposure to halloysite nanotubes may have unintended outcomes.

Micro- and nanoscale technologies for tissue engineering and drug discovery applications

Micro- and nanoscale technologies are emerging as powerful enabling tools for tissue engineering and drug discovery. In tissue engineering, micro- and nanotechnologies can be used to fabricate biomimetic scaffolds with increased complexity and vascularization. Furthermore, these technologies can be used to control the cellular microenvironment (i.e., cell-cell, cell-matrix and cell-soluble factor interactions) in a reproducible manner and with high temporal and spatial resolution. In drug discovery, miniaturized platforms based on micro- and nanotechnology can be used to precisely control the fluid flow, enable high-throughput screening, and minimize sample or reagent volumes. In addition, these systems enhance reproducibility and significantly reduce reaction times. This paper reviews the recent developments in the field of micro- and nanoscale technology and gives examples of their tissue engineering and drug discovery applications.

Enlargement of halloysite clay nanotube lumen by selective etching of aluminum oxide

Halloysite clay tubes have 50 nm diameter and chemically different inner and outer walls (inner surface of aluminum oxide and outer surface of silica). Due to this different chemistry, the selective etching of alumina from inside the tube was realized, while preserving their external diameter (lumen diameter changed from 15 to 25 nm). This increases 2-3 times the tube lumen capacity for loading and further sustained release of active chemical agents such as metals, corrosion inhibitors, and drugs. In particular, halloysite loading efficiency for the benzotriazole increased 4 times by selective etching of 60% alumina within the tubes' lumens. Specific surface area of the tubes increased over 6 times, from 40 to 250 m(2)/g, upon acid treatment.

Self assembled temperature responsive surfaces for generation of cell patches for bone tissue engineering

One of the major challenges in the fabrication of tissue engineered scaffolds is the ability of the scaffold to biologically mimic autograft-like tissues. One of the alternate approaches to achieve this is by the application of cell seeded scaffolds with optimal porosity and mechanical properties. However, the current approaches for seeding cells on scaffolds are not optimal in terms of seeding efficiencies, cell penetration into the scaffold and more importantly uniform distribution of cells on the scaffold. Also, recent developments in scaffold geometries to enhance surface areas, pore sizes and porosities tend to further complicate the scenario. Cell sheet-based approaches for cell seeding have demonstrated a successful approach to generate scaffold-free tissue engineering approaches. However, the method of generating the temperature responsive surface is quite challenging and requires carcinogenic reagents and gamma rays. Therefore, here, we have developed temperature responsive substrates by layer-by-layer self assembly of smart polymers. Multilayer thin films prepared from tannic acid and poly N-isopropylacrylamide were fabricated based on their electrostatic and hydrogen bonding interactions. Cell attachment and proliferation studies on these thin films showed uniform cell attachment on the substrate, matching tissue culture plates. Also, the cells could be harvested as cell patches and sheets from the scaffolds, by reducing the temperature for a short period of time, and seeded onto porous scaffolds for tissue engineering applications. An enhanced cell seeding efficiency on scaffolds was observed using the cell patch-based technique as compared to seeding cells in suspension. Owing to the already pre-existent cell-cell and cell-extracellular matrix interactions, the cell patch showed the ability to reattach rapidly onto scaffolds and showed enhanced ability to proliferate and differentiate into a bone-like matrix.