The adhesive strength of non-spherical particles mediated by specific interactions

Investigation of the size and shape of nano-microcarriers for targeted drug delivery to atherosclerotic plaque in ischemic stroke prevention

Recognizing the significance of drug carriers in the treatment of atherosclerotic plaque is crucial in light of the worldwide repercussions of ischemic stroke. Conservative methodologies, specifically targeted drug delivery, present encouraging substitutes that mitigate the hazards linked to invasive procedures. With the intention of illuminating their considerable significance and prospective benefits, this study examines the impact of the geometry and dimensions of drug-loaded nano-microcarriers on atherosclerotic plaque. The research utilizes a finite element approach to simulate the motion and fluid dynamics of nano-microcarriers loaded with drugs within the carotid arteries. Carriers are available in a variety of shapes and sizes to accommodate patient-specific geometries, pulsatile fluid flow, and non-Newtonian blood properties. Optimization of drug delivery is achieved through the examination of carrier interaction with the inner wall. The results demonstrated that the interaction data between particles and the inner wall of atherosclerotic plaques exhibits micro- and nanoscale patterns that are distinct. Symmetric plaques demonstrate that nanoparticles with a 0.4 shape factor and diameters below 200 nm show the highest interaction rate. Conversely, larger particles (200 and 500 nm) with shape factors of 1 demonstrate comparatively elevated interaction rates. The optimal shape factor for drug-loaded microparticles has been determined to be one, and the number of interactions increases as the diameter of the nanoparticles increases, with a significant increase observed at a shape factor of one. Asymmetric plaques exhibit the maximum interaction rates among particles that have a shape factor of 0.4 and have diameters smaller than 500 µm. The findings establish a foundation for novel therapeutic strategies, establishing nano-microparticles as auspicious contenders for accurate and efficacious drug delivery systems that inhibit plaque proliferation.

Nanoparticle-mediated diagnosis, treatment, and prevention of breast cancer

By virtue of their advanced physicochemical properties, nanoparticles have attracted significant attention from researchers for application in diverse fields of medical science. Breast cancer, presenting a high risk of morbidity and mortality, frequently occurs in women and is considered a malignant tumor. Globally, breast cancer is considered the second leading cause of death. Accordingly, its poor prognosis, invasive metastasis, and relapse have motivated oncologists and nano-medical researchers to develop highly potent nanotherapies to cure this deadly disease. In this case, nanoparticles have emerged as responsive platforms for breast cancer management, providing new approaches to improve the diagnostic accuracy, deliver targeted therapies, and limit the progression of this disease. Recently, smart nano-carriers encapsulating drugs, ligands, and tracking probes have been developed for the specific therapy of breast cancers. Further, efforts have been devoted to developing various nano-systems with minimal toxicity. The aim of this review is to present a background on novel nanotheranostic methods that can be employed to diagnose and treat breast cancers and encourage readers to focus on the development of novel nanomedicine for breast cancers and other deadly diseases. In this context, we discuss different methods for the diagnosis, treatment, and prevention of breast cancers using different metal and metal oxide nanoparticles.

Impact of mechanical cues on key cell functions and cell-nanoparticle interactions

In recent years, it has been recognized that mechanical forces play an important regulative role in living organisms and possess a direct impact on crucial cell functions, ranging from cell growth to maintenance of tissue homeostasis. Advancements in mechanobiology have revealed the profound impact of mechanical signals on diverse cellular responses that are cell type specific. Notably, numerous studies have elucidated the pivotal role of different mechanical cues as regulatory factors influencing various cellular processes, including cell spreading, locomotion, differentiation, and proliferation. Given these insights, it is unsurprising that the responses of cells regulated by physical forces are intricately linked to the modulation of nanoparticle uptake kinetics and processing. This complex interplay underscores the significance of understanding the mechanical microenvironment in shaping cellular behaviors and, consequently, influencing how cells interact with and process nanoparticles. Nevertheless, our knowledge on how localized physical forces affect the internalization and processing of nanoparticles by cells remains rather limited. A significant gap exists in the literature concerning a systematic analysis of how mechanical cues might bias the interactions between nanoparticles and cells. Hence, our aim in this review is to provide a comprehensive and critical analysis of the existing knowledge regarding the influence of mechanical cues on the complicated dynamics of cell-nanoparticle interactions. By addressing this gap, we would like to contribute to a detailed understanding of the role that mechanical forces play in shaping the complex interplay between cells and nanoparticles.

Effect of Circadian Rhythm Modulated Blood Flow on Nanoparticle based Targeted Drug Delivery in Virtual In Vivo Arterial Geometries

Delivery of drug using nanocarriers tethered with vasculature-targeting epitopes aims to maximize the therapeutic efficacy of the drug while minimizing the drug side effects. Circadian rhythm which is governed by the central nervous system has implications for targeted drug delivery due to sleep-wake cycle changes in blood flow dynamics. This paper presents an advanced fluid dynamics modeling method that is based on viscous incompressible shear-rate fluid (blood) coupled with an advection-diffusion equation to simulate the formation of drug concentration gradients in the blood stream and buildup of concentration at the targeted site. The method is equipped with an experimentally calibrated nanoparticle-endothelial cell adhesion model that employs Robin boundary conditions to describe nanoparticle retention based on probability of adhesion, a friction model accounting for surface roughness of endothelial cell layer, and a dispersion model based on Taylor-Aris expression for effective diffusion in the boundary layer. The computational model is first experimentally validated and then tested on engineered bifurcating arterial systems where impedance boundary conditions are applied at the outflow to account for the downstream resistance at each outlet. It is then applied to a virtual geometric model of an in vivo arterial tree developed through MRI-based image processing techniques. These simulations highlight the potential of the computational model for drug transport, adhesion, and retention at multiple sites in virtual in vivo models. The model provides a virtual platform for exploring circadian rhythm modulated blood flow for targeted drug delivery while minimizing the in vivo experimentation.

Chimeric nanobody-decorated liposomes by self-assembly

Liposomes as drug vehicles have advantages, such as payload protection, tunable carrying capacity and improved biodistribution. However, due to the dysfunction of targeting moieties and payload loss during preparation, immunoliposomes have yet to be favoured in commercial manufacturing. Here we report a chemical modification-free biophysical approach for producing immunoliposomes in one step through the self-assembly of a chimeric nanobody (cNB) into liposome bilayers. cNB consists of a nanobody against human epidermal growth factor receptor 2 (HER2), a flexible peptide linker and a hydrophobic single transmembrane domain. We determined that 64% of therapeutic compounds can be encapsulated into 100-nm liposomes, and up to 2,500 cNBs can be anchored on liposomal membranes without steric hindrance under facile conditions. Subsequently, we demonstrate that drug-loaded immunoliposomes increase cytotoxicity on HER2-overexpressing cancer cell lines by 10- to 20-fold, inhibit the growth of xenograft tumours by 3.4-fold and improve survival by more than twofold.

Modeling of spatiotemporal dynamics of ligand-coated particle flow in targeted drug delivery processes

Nanoparticles tethered with vasculature-binding epitopes have been used to deliver the drug into injured or diseased tissues via the bloodstream. However, the extent that blood flow dynamics affects nanoparticle retention at the target site after adhesion needs to be better understood. This knowledge gap potentially underlies significantly different therapeutic efficacies between animal models and humans. An experimentally validated mathematical model that accurately simulates the effects of blood flow on nanoparticle adhesion and retention, thus circumventing the limitations of conventional trial-and-error-based drug design in animal models, is lacking. This paper addresses this technical bottleneck and presents an integrated mathematical method that derives heavily from a unique combination of a mechanics-based dispersion model for nanoparticle transport and diffusion in the boundary layers, an asperity model to account for surface roughness of endothelium, and an experimentally calibrated stochastic nanoparticle-cell adhesion model to describe nanoparticle adhesion and subsequent retention at the target site under external flow. PLGA-b-HA nanoparticles tethered with VHSPNKK peptides that specifically bind to vascular cell adhesion molecules on the inflamed vascular wall were investigated. The computational model revealed that larger particles perform better in adhesion and retention at the endothelium for the particle sizes suitable for drug delivery applications and within physiologically relevant shear rates. The computational model corresponded closely to the in vitro experiments which demonstrates the impact that model-based simulations can have on optimizing nanocarriers in vascular microenvironments, thereby substantially reducing in vivo experimentation as well as the development costs.

In silico model development and optimization of in vitro lung cell population growth

Tissue engineering predominantly relies on trial and error in vitro and ex vivo experiments to develop protocols and bioreactors to generate functional tissues. As an alternative, in silico methods have the potential to significantly reduce the timelines and costs of experimental programs for tissue engineering. In this paper, we propose a methodology to formulate, select, calibrate, and test mathematical models to predict cell population growth as a function of the biochemical environment and to design optimal experimental protocols for model inference of in silico model parameters. We systematically combine methods from the experimental design, mathematical statistics, and optimization literature to develop unique and explainable mathematical models for cell population dynamics. The proposed methodology is applied to the development of this first published model for a population of the airway-relevant bronchio-alveolar epithelial (BEAS-2B) cell line as a function of the concentration of metabolic-related biochemical substrates. The resulting model is a system of ordinary differential equations that predict the temporal dynamics of BEAS-2B cell populations as a function of the initial seeded cell population and the glucose, oxygen, and lactate concentrations in the growth media, using seven parameters rigorously inferred from optimally designed in vitro experiments.

Nanoparticle Anisotropy Increases Targeting Interactions on Live-Cell Membranes

This paper describes how branch lengths of anisotropic nanoparticles can affect interactions between grafted ligands and cell-membrane receptors. Using live-cell, single-particle tracking, we found that DNA aptamer-gold nanostar nanoconstructs with longer branches showed improved binding efficacy to human epidermal growth factor receptor 2 (HER2) on cancer cell membranes. Inhibiting nanoconstruct-HER2 binding promoted nonspecific interactions, which increased the rotational speed of long-branched nanoconstructs but did not affect that of short-branched constructs. Bivariate analysis of the rotational and translational dynamics showed that longer branch lengths increased the ratio of targeting to nontargeting interactions. We also found that longer branches increased the nanoconstruct-cell interaction times before internalization and decreased intracellular trafficking velocities. Differences in binding efficacy revealed by single-particle dynamics can be attributed to the distinct protein corona distributions on short- and long-branched nanoconstructs, as validated by transmission electron microscopy. Minimal protein adsorption at the high positive curvature tips of long-branched nanoconstructs facilitated binding of DNA aptamer ligands to HER2. Our study reveals the significance of nanoparticle branch length in regulating local chemical environment and interactions with live cells at the single-particle level.

Features of Anisotropic Drug Delivery Systems

Natural materials are anisotropic. Delivery systems occurring in nature, such as viruses, blood cells, pollen, and many others, do have anisotropy, while delivery systems made artificially are mostly isotropic. There is apparent complexity in engineering anisotropic particles or capsules with micron and submicron sizes. Nevertheless, some promising examples of how to fabricate particles with anisotropic shapes or having anisotropic chemical and/or physical properties are developed. Anisotropy of particles, once they face biological systems, influences their behavior. Internalization by the cells, flow in the bloodstream, biodistribution over organs and tissues, directed release, and toxicity of particles regardless of the same chemistry are all reported to be factors of anisotropy of delivery systems. Here, the current methods are reviewed to introduce anisotropy to particles or capsules, including loading with various therapeutic cargo, variable physical properties primarily by anisotropic magnetic properties, controlling directional motion, and making Janus particles. The advantages of combining different anisotropy in one entity for delivery and common problems and limitations for fabrication are under discussion.

The interaction between particles and vascular endothelium in blood flow

Particle-based drug delivery systems have shown promising application potential to treat human diseases; however, an incomplete understanding of their interactions with vascular endothelium in blood flow prevents their inclusion into mainstream clinical applications. The flow performance of nano/micro-sized particles in the blood are disturbed by many external/internal factors, including blood constituents, particle properties, and endothelium bioactivities, affecting the fate of particles in vivo and therapeutic effects for diseases. This review highlights how the blood constituents, hemodynamic environment and particle properties influence the interactions and particle activities in vivo. Moreover, we briefly summarized the structure and functions of endothelium and simulated devices for studying particle performance under blood flow conditions. Finally, based on particle-endothelium interactions, we propose future opportunities for novel therapeutic strategies and provide solutions to challenges in particle delivery systems for accelerating their clinical translation. This review helps provoke an increasing in-depth understanding of particle-endothelium interactions and inspires more strategies that may benefit the development of particle medicine.

Drug Delivery Angle for Various Atherosclerosis and Aneurysm Percentages of the Carotid Artery

Stroke is the second cause of mortality among adult males and the first cause of death in adult females all around the world. It is also recognized as one of the most important causes of morbidity and dementia in adults. Stenosis or rupture of the only channels of the blood supply from the heart to the brain (carotid arteries) is among the main causes of stroke. In this regard, treatment of the lesions of carotid arteries, including atherosclerosis and aneurysm, could be a huge step in preventing stroke and improving brain performance. Targeted drug delivery by drug-carrying nanoparticles is the latest method for optimal delivery of drug to the damaged parts of the artery. In this study, a wide range of carotid artery lesions, including different percentages of atherosclerosis and aneurysm, were considered. After analyzing the dynamics of the fluid flow in different damaged regions and selecting the magnetic framework with proper ligand (Fe3O4@MOF) as the drug carrier, the size of the particles and their number per cycle were analyzed. Based on the results, the particle size of 100 nm and the use of 300 particles per injection at each cardiac cycle can result in maximum drug delivery to the target site. Then, the effect of the hospital bed angle on drug delivery was investigated. The results showed a unique optimal drug delivery angle for each extent of atherosclerosis or aneurysm. For example, in a 50% aneurysm, drug delivery at an angle of 30° is about 387% higher than that at an angle of 15°. Finally, simulation of real geometry indicated the effectiveness of simple geometry instead of real geometry for the simulation of carotid arteries, which can remarkably decrease the computational time and costs.

In-silico study of drug delivery to atherosclerosis in the human carotid artery using metal-organic frameworks based on adhesion of nanocarriers

This study investigates nanocarriers (NCs) for drug delivery targeting carotid artery atherosclerosis. This targeted drug delivery mechanism is based on ligand-receptor bindings facilitated by coating NCs with P-selectin aptamers, which exhibit high affinities for P-selectin plaque receptors. Recognizing the significant advantages of metal-organic frameworks (MOFs), such as their high drug-loading percentages, we chose them as nanocarriers for this research. Our evaluation considers critical factors: NC surface density (the number of attached nanocarriers per unit of plaque area), toxicity (percentage of NCs missing the target), and efficient drug transfer to plaque tissue. Employing molecular dynamics (MD) for drug loading calculations via van der Waals interactions and computational fluid dynamics (CFD) for toxicity, surface density, and drug transfer assessments, we achieve a comprehensive analysis. A cardiac cycle-based metric guides optimal MOF release conditions, establishing an ideal dosage of 600 NCs per cycle. MOF-801 exhibits outstanding drug delivery performance, particularly in plaque targeting. While a magnetic field enhances NC adhesion, its impact on drug transfer is limited, emphasizing the need for further optimization in magnetic targeting for NC-based therapies. This study provides crucial insights into NC drug delivery performance in carotid artery atherosclerosis, advancing the field of targeted drug delivery for atherosclerosis treatment.

Targeted drug delivery in pulmonary therapy based on adhesion and transmission of nanocarriers designed with a metal-organic framework

With the recent increase in lung diseases, especially with the onset of the coronavirus pandemic, the design of a highly efficient and optimal targeted drug delivery system for the lungs is crucial in inhaler-based delivery systems. This study aimed to design a magnetic field-assisted targeted drug delivery system to the lungs using three types of metal-organic frameworks (MOFs) and nanoliposomes. The optimization of the system was based on three main parameters: the surface density of the nanocarriers' (NCs) adherence to each of the lung branches, the amount of drug transferred to each branch, and the toxicity based on the rate of nanocarrier delivery to the branches. The study investigated the effect of increasing the diameter of the drug carriers and the amount of drug loaded onto the NCs in improving drug delivery to targeted areas of the lung. Results showed that the presence of a magnetic field significantly increased the adhesion of NCs to the targeted branches. The application of a magnetic field and the type of drug carrier had a significant effect on drug delivery downstream of the lung and reduced drug toxicity. The study found that Fe3O4@UiO-66 (iron-oxide nanoparticle attached to the surface of UiO-66, a type of MOF) and Fe3O4@PAA/AuNCs/ZIF-8 carriers, (iron-oxide nanoparticle attached to a hybrid structure composed of three different materials: poly (acrylic acid) (PAA), gold nanoclusters (AuNCs), and zeolitic imidazolate framework-8 (ZIF-8)), had the greatest drug delivery rate in diameters above 200 nm and less than 200 nm, respectively.

Current research trends of nanomedicines

Owing to the inherent shortcomings of traditional therapeutic drugs in terms of inadequate therapeutic efficacy and toxicity in clinical treatment, nanomedicine designs have received widespread attention with significantly improved efficacy and reduced non-target side effects. Nanomedicines hold tremendous theranostic potential for treating, monitoring, diagnosing, and controlling various diseases and are attracting an unfathomable amount of input of research resources. Against the backdrop of an exponentially growing number of publications, it is imperative to help the audience get a panorama image of the research activities in the field of nanomedicines. Herein, this review elaborates on the development trends of nanomedicines, emerging nanocarriers, in vivo fate and safety of nanomedicines, and their extensive applications. Moreover, the potential challenges and the obstacles hindering the clinical translation of nanomedicines are also discussed. The elaboration on various aspects of the research trends of nanomedicines may help enlighten the readers and set the route for future endeavors.

Manipulating Neovasculature-Targeting Capability of Biomimetic Nanodiscs for Synergistic Photoactivatable Tumor Infarction and Chemotherapy

Tumor infarction therapy is a promising antitumor strategy with the advantages of taking a short therapy duration, less risk of resistance, and effectiveness against a wide range of tumor types. However, its clinical application is largely hindered by tumor recurrence in the surviving rim and the potential risk of thromboembolic events due to nonspecific vasculature targeting. Herein, a neovasculature-targeting synthetic high-density lipoprotein (sHDL) nanodisc loaded with pyropheophorbide-a and camptothecin (CPN) was fabricated for photoactivatable tumor infarction and synergistic chemotherapy. By manipulating the anisotropy in ligand modification of sHDL nanodiscs, CPN modified with neovaculature-targeting peptide on the planes (PCPN) shows up to 7-fold higher cellular uptake compared with that around the edge (ECPN). PCPN can efficiently bind to endothelial cells of tumor vessels, and upon laser irradiation, massive local thrombus can be induced by the photodynamic reaction to deprive nutrition supply. Meanwhile, CPT could be released in response to the tumor reductive environment, thus killing residual tumor cells in the surviving rim to inhibit recurrence. These findings not only offer a powerful approach of synergistic cancer therapy but also suggest the potential of plane-modified sHDL nanodiscs as a versatile drug delivery nanocarrier.

Rational nanoparticle design: Optimization using insights from experiments and mathematical models

Polymeric nanoparticles are highly tunable drug delivery systems that show promise in targeting therapeutics to specific sites within the body. Rational nanoparticle design can make use of mathematical models to organize and extend experimental data, allowing for optimization of nanoparticles for particular drug delivery applications. While rational nanoparticle design is attractive from the standpoint of improving therapy and reducing unnecessary experiments, it has yet to be fully realized. The difficulty lies in the complexity of nanoparticle structure and behavior, which is added to the complexity of the physiological mechanisms involved in nanoparticle distribution throughout the body. In this review, we discuss the most important aspects of rational design of polymeric nanoparticles. Ultimately, we conclude that many experimental datasets are required to fully model polymeric nanoparticle behavior at multiple scales. Further, we suggest ways to consider the limitations and uncertainty of experimental data in creating nanoparticle design optimization schema, which we call quantitative nanoparticle design frameworks.

A flexible wearable device coupled with injectable Fe3O4 nanoparticles for capturing circulating tumor cells and triggering their deaths

Elimination of circulating tumor cells (CTCs) in the blood can be an effective therapeutic approach to disrupt metastasis. Here, a strategy is proposed to implement flexible wearable electronics and injectable nanomaterials to disrupt the hematogenous transport of CTCs. A flexible device containing an origami magnetic membrane is used to attract Fe₃O₄@Au nanoparticles (NPs) that are surface modified with specific aptamers and intravenously injected into blood vessels, forming an invisible hand and fishing line/bait configuration to specifically capture CTCs through bonding with aptamers. Thereafter, thinned flexible AlGaAs LEDs in the device offer an average fluence of 15.75 mW mm^-2 at a skin penetration depth of 1.5 mm, causing a rapid rise of temperature to 48 °C in the NPs and triggering CTC death in 10 min. The flexible device has been demonstrated for intravascular isolation and enrichment of CTCs with a capture efficiency of 72.31% after 10 cycles in a simulated blood circulation system based on a prosthetic upper limb. The fusion of nanomaterials and flexible electronics reveals an emerging field that utilizes wearable and flexible stimulators to activate biological effects offered by nanomaterials, leading to improved therapeutical effects and postoperative outcomes of diseases.

Optimal heat transport induced by magnetic nanoparticle delivery in vascularised tumours

We describe a novel mathematical model for blood flow, delivery of nanoparticles, and heat transport in vascularised tumour tissue. The model, which is derived via the asymptotic homogenisation technique, provides a link between the macroscale behaviour of the system and its underlying, tortuous micro-structure, as parametrised in Penta and Ambrosi (2015). It consists of a double Darcy's law, coupled with a double advection-diffusion-reaction system describing heat transport, and an advection-diffusion-reaction equation for transport and adhesion of particles. Particles are assumed sufficiently large and do not extravasate to the tumour interstitial space but blood and heat can be exchanged between the two compartments. Numerical simulations of the model are performed using a finite element method to investigate cancer hyperthermia induced by the application of magnetic field applied to injected iron oxide nanoparticles. Since tumour microvasculature is more tortuous than that of healthy tissue and thus suboptimal in terms of fluid and drug transport, we study the influence of the vessels' geometry on tumour temperature. Effective and safe hyperthermia treatment requires tumour temperature within certain target range, generally estimated between 42 °C and 46 °C, for a certain target duration, typically 0.5h to 2h. As temperature is difficult to measure in situ, we use our model to determine the ranges of tortuosity of the microvessels, magnetic intensity, injection time, wall shear stress rate, and concentration of nanoparticles required to achieve given target conditions.

Albumin-based nanoparticles: small, uniform and reproducible

Nanomedicine carries the hope of precisely identifying and healing lesion sites in vivo. However, the reproducible synthesis of monodisperse protein nanoparticles smaller than 50 nm in diameter and up-scalable to industrial production still poses challenges to researchers. In this report, we describe nanoparticles, so called Absicles, based on an albumin matrix and prepared by a procedure developed by the authors. These Absicles are monodisperse with tunable diameters ranging from 15 nm to 70 nm respectively. They exhibit long term stability against decomposition and aggregation, exceeding many months. The synthesis of Absicles shows exceptionally high reproducibility concerning size, and is simple and cost-effective for up-scaling. Absicles, bearing appropriate targeting groups, bind with high specificity to colon carcinoma tissue ex vivo; they present an attractive platform for further development towards drug delivery applications.

Disturbed Flow-Facilitated Margination and Targeting of Nanodisks Protect against Atherosclerosis

Disturbed blood flow induces endothelial pro-inflammatory responses that promote atherogenesis. Nanoparticle-based therapeutics aimed at treating endothelial inflammation in vasculature where disturbed flow occurs may provide a promising avenue to prevent atherosclerosis. By using a vertical-step flow apparatus and a microfluidic chip of vascular stenosis, herein, it is found that the disk-shaped versus the spherical nanoparticles exhibit preferential margination (localization and adhesion) to the regions with the pro-atherogenic disturbed flow. By employing a mouse model of carotid partial ligation, superior targeting and higher accumulation of the disk-shaped particles are also demonstrated within disturbed flow areas than that of the spherical particles. In hyperlipidemia mice, administration of disk-shaped particles loaded with hypomethylating agent decitabine (DAC) displays greater anti-inflammatory and anti-atherosclerotic effects compared with that of the spherical counterparts and exhibits reduced toxicity than "naked" DAC. The findings suggest that shaping nanoparticles to disk is an effective strategy for promoting their delivery to atheroprone endothelia.

Recent Patents and Potential Applications of Homogenisation Techniques in Drug Delivery Systems

BACKGROUND

The term homogenise means "to force or provide coalesce". Homogenisation is a process to attain homogenous particle size. The objective of the homogenisation process is to use fluid force to split the fragments or tiny particles contained in the fluids into very small dimensions and form a sustainable dispersion suitable for further production.

METHODS

The databases were collected through Scopus, google patent, science web, google scholar, PubMed on the concept of homogenisation. The data obtained were systematically investigated.

RESULTS

The present study focus on the use of the homogenisation in drug delivery system. The aim of homogenisation process is to achieve the particle size in micro-and nano- range as it affects the different parameters in the formulation and biopharmaceutical profile of the drug. The particle size reduction plays a key role in influencing drug dissolution and absorption. The reduced particle size enhances the stability and therapeutic efficacy of the drug. Homogenization technology ensures to achieve effective, clinically efficient and targeted drug delivery with the minimal side effect.

CONCLUSION

Homogenization technology has been shown to be an efficient and easy method of size reduction to increase solubility and bioavailability, stability of drug carriers. This article gives an overview of the process attributes affecting the homogenization process, the patenting of homogeniser types, design, the geometry of valves and nozzles and its role in drug delivery.

Chlorogenic Acid-Conjugated Nanoparticles Suppression of Platelet Activation and Disruption to Tumor Vascular Barriers for Enhancing Drug Penetration in Tumor

Hypercoagulation threatens the lives of cancer patients and cancer progression. Platelet overactivation attributes to the tumor-associated hypercoagulation and maintenance of the tumor endothelial integrity, leading to limited intratumoral perfusion of nanoagents into solid tumors in spite of the enhanced penetration and retention effect (EPR). Therefore, the clinical application of nanotherapeutics in solid cancer still faces great challenges. Herein, this work establishes platelet inhibiting nanoagents based on Fe^III -doped C₃ N₄ coloaded with the chemotherapy drug and the antiplatelet drug chlorogenic acid (CA), further opening tumor vascular endothelial junctions, thereby disrupting the tumor vascular endothelial integrity, and enhancing drug perfusion. Moreover, CA not only damages the cancer cells but also potentiates the cytotoxicity induced by the chemotherapy drug doxorubicin, synergistically ablating the tumor tissue. Further, the introduction of CA relieves the original causes of the hypercoagulable state such as tissue factor (TF), thrombin, and matrix metalloproteinases (MMPs) secreted by cancer cells. It is anticipated that the hypercoagulation- and platelet-inhibition strategy by integration of phenolic acid CA into chemotherapy provides insights into platelet inhibition-assisted theranostics based on nanomedicines.

Multi-scale modelling of nanoparticle delivery and heat transport in vascularised tumours

We focus on modelling of cancer hyperthermia driven by the application of the magnetic field to iron oxide nanoparticles. We assume that the particles are interacting with the tumour environment by extravasating from the vessels into the interstitial space. We start from Darcy's and Stokes' problems in the interstitial and fluid vessels compartments. Advection-diffusion of nanoparticles takes place in both compartments (as well as uptake in the tumour interstitium), and a heat source proportional to the concentration of nanoparticles drives heat diffusion and convection in the system. The system under consideration is intrinsically multi-scale. The distance between adjacent vessels (the micro-scale) is much smaller than the average tumour size (the macro-scale). We then apply the asymptotic homogenisation technique to retain the influence of the micro-structure on the tissue scale distribution of heat and particles. We derive a new system of homogenised partial differential equations (PDEs) describing blood transport, delivery of nanoparticles and heat transport. The new model comprises a double Darcy's law, coupled with two double advection-diffusion-reaction systems of PDEs describing fluid, particles and heat transport and mass, drug and heat exchange. The role of the micro-structure is encoded in the coefficients of the model, which are to be computed solving appropriate periodic problems. We show that the heat distribution is impaired by increasing vessels' tortuosity and that regularization of the micro-vessels can produce a significant increase (1-2 degrees) in the maximum temperature. We quantify the impact of modifying the properties of the magnetic field depending on the vessels' tortuosity.

The Antimicrobial Effect of Gold Quantum Dots and Femtosecond Laser Irradiation on the Growth Kinetics of Common Infectious Eye Pathogens: An In Vitro Study

We studied the antimicrobial effect of gold quantum dots (AuQDs), femtosecond laser irradiation, and the combined effect of laser irradiation and AuQD treatment against common infectious eye pathogens. The INSPIRE HF100 laser system (Spectra Physics) provided a femtosecond laser, which was pumped by a mode-locked femtosecond Ti: sapphire laser MAI TAI HP (Spectra Physics), while a Quanta-Ray nanosecond Nd: YAG laser (Spectra-Physics) was used to precisely synthesize 7.8, 8.7, and 11.6 nm spherical AuQDs. Then, the in vitro growth kinetics and growth rate analysis of E. coli, methicillin-resistant Staphylococcus aureus, Enterococcus faecalis, Listeria monocytogenes, and Candida albicans (treated with the AuQDs, femtosecond laser irradiation, or combined laser and AuQDs treatment) was measured. The biocompatibility of the AuQDs with the retinal epithelial cell lines (ARPE-19) and their toxicity to the cells was assayed. The results showed that (1) in vitro irradiation using a 159 J/cm² energy density obtained from the 400 nm femtosecond laser suppressed the growth of each of the five pathogens. (2) Similarly, treatment with the AuQDs was antimicrobial against the four bacteria. The AuQDs with an average size of 7.8 nm were more highly antimicrobial and biocompatible and were less cytotoxic than the larger AuQD sizes. (3) The combined femtosecond laser irradiation and AuQD treatment was more highly antimicrobial than each treatment alone. (4) The AuQD treatment did not impair the rate of wound closure in vitro. These findings suggest that combined femtosecond laser irradiation and AuQD treatment is significantly antimicrobial against Candida albicans, Gram-positive L. monocytogenes, S. aureus, and E. faecalis, as well as Gram-negative E. coli. The nontoxicity and biocompatibility of the AuQD particles tested suggest that this form of treatment may be clinically viable.

Influence of Elasticity of Hydrogel Nanoparticles on Their Tumor Delivery

Polymeric nanocarriers have a broad range of clinical applications in recent years, but an inefficient delivery of polymeric nanocarriers to target tissues has always been a challenge. These results show that tuning the elasticity of hydrogel nanoparticles (HNPs) improves their delivery efficiency to tumors. Herein, a microfluidic system is constructed to evaluate cellular uptake of HNPs of different elasticity under flow conditions. It is found that soft HNPs are more efficiently taken up by cells than hard HNPs under flow conditions, owing to the greater adhesion between soft HNPs and cells. Furthermore, in vivo imaging reveals that soft HNPs have a more efficient tumor delivery than hard HNPs, and the greater targeting potential of soft HNPs is associated with both prolonged blood circulation and a high extent of cellular adhesion.

Predictive Shapes of Ellipsoid PPDL-PTHF Copolymer Particles Prepared by the Phantom Stretching Technique

Ellipsoidal polymer particles can be prepared from spheres by unidirectional stretching at elevated temperatures, while the particles’ aspect ratios (AR) that result from this phantom stretching methodology are often not precisely predictable. Here, an elastic deformation model was exemplarily evaluated for ~50 µm spherical microparticles from PPDL-PTHF block copolymers. The prolate ellipsoidal particles, obtained by stretching in polyvinyl alcohol phantoms, differed in dimensions at identical relative phantoms elongations up to 150%, depending on the relative polymer composition and their systematically altered mechanical properties. Importantly, the resulting particle shapes within the studied range of AR up to ~4 matched the predictions of the elastic deformation model, which includes information of the elastic moduli of phantom and particle materials. These data suggest that the model may be applicable to predict the conditions needed to precisely prepare ellipsoids of desired AR and may be applicable to various deformable particle materials.

Designing anisotropic inorganic nanocapsules via self-assembly of polymer-like ultrathin Au nanowires

Anisotropic assembly of nanomaterials into hollow structures is an attractive technique in biomedicine and biosensing. Commonly used polymer materials are easy to assemble yet it is hard to form anisotropic morphologies. Here in this work, we successfully prepared a novel gold nanocapsule with an anisotropic ellipsoidal shape and cavity structure by the self-assembly of ultrathin Au nanowires. The assembly mechanism is further studied by tuning the assembly conditions such as nanowire concentration, solvent composition, and temperature. It is found that the controlling forces of the nanowire assembly process are mainly the symmetric interfacial tension and the asymmetric nanowire deformation potential, which contribute together to result in anisotropic nanocapsules. Finally, the obtained Au nanocapsules were used as nanocarriers to load pyrene as a model drug, showing great drug loading ability and pH-responsive drug release behavior. We believe that this unique anisotropic assembly product will bring new insights into nanostructure design and soft matter research.

Pharmacokinetics of magnetic iron oxide nanoparticles for medical applications

Magnetic iron oxide nanoparticles (MNPs) have been under intense investigation for at least the last five decades as they show enormous potential for many biomedical applications, such as biomolecule separation, MRI imaging and hyperthermia. Moreover, a large area of research on these nanostructures is concerned with their use as carriers of drugs, nucleic acids, peptides and other biologically active compounds, often leading to the development of targeted therapies. The uniqueness of MNPs is due to their nanometric size and unique magnetic properties. In addition, iron ions, which, along with oxygen, are a part of the MNPs, belong to the trace elements in the body. Therefore, after digesting MNPs in lysosomes, iron ions are incorporated into the natural circulation of this element in the body, which reduces the risk of excessive storage of nanoparticles. Still, one of the key issues for the therapeutic applications of magnetic nanoparticles is their pharmacokinetics which is reflected in the circulation time of MNPs in the bloodstream. These characteristics depend on many factors, such as the size and charge of MNPs, the nature of the polymers and any molecules attached to their surface, and other. Since the pharmacokinetics depends on the resultant of the physicochemical properties of nanoparticles, research should be carried out individually for all the nanostructures designed. Almost every year there are new reports on the results of studies on the pharmacokinetics of specific magnetic nanoparticles, thus it is very important to follow the achievements on this matter. This paper reviews the latest findings in this field. The mechanism of action of the mononuclear phagocytic system and the half-lives of a wide range of nanostructures are presented. Moreover, factors affecting clearance such as hydrodynamic and core size, core morphology and coatings molecules, surface charge and technical aspects have been described.

Particle shape engineering for improving safety and efficacy of doxorubicin - A case study of rod-shaped carriers in resistant small cell lung cancer

Therapeutic drug delivery is known to be influenced by interplay between various design parameters of delivery carriers which influence the drug uptake efficiency and subsequently the effectiveness of treatment. Amongst, the several design parameters such as size, shape and surface charge, particle shape is gaining attention as a crucial design parameter for development of robust and efficient delivery carriers. In this exploration, we investigated the influence of particle shape on injectability and therapeutic effectiveness of the delivery carriers using doxorubicin (DOX) conjugated polymeric microparticles. Results of injectability experiments demonstrated the influence of particle shape with anisotropic rod-shaped particles displaying increased injectability as against spherical particles. Impact of particle shape on therapeutic effectiveness was assessed against small cell lung cancer (SCLC) which was selected as a model disease. Results of cellular uptake studies revealed preferential uptake of rod-shaped particles than spherical particles in cancer cells. These results were further validated by in-vitro tumor simulation studies wherein rod-shaped particles displayed enhanced anti-tumorigenic activity along with distortion of tumor integrity against spheres. Furthermore, the impact of particle size was also assessed on cardiotoxicity, an adverse effect of DOX which limits its therapeutic use. Results illustrated that the high aspect ratio particles displayed diminished cardiotoxicity activity. These results provide valuable insights about influence of particle shape for designing efficient therapeutics.

Cell Inertia: Predicting Cell Distributions in Lung Vasculature to Optimize Re-endothelialization

We created a transient computational fluid dynamics model featuring a particle deposition probability function that incorporates inertia to quantify the transport and deposition of cells in mouse lung vasculature for the re-endothelialization of the acellular organ. Our novel inertial algorithm demonstrated a 73% reduction in cell seeding efficiency error compared to two established particle deposition algorithms when validated with experiments based on common clinical practices. We enhanced the uniformity of cell distributions in the lung vasculature by increasing the injection flow rate from 3.81 ml/min to 9.40 ml/min. As a result, the cell seeding efficiency increased in both the numerical and experimental results by 42 and 66%, respectively.

Using Parallel Coordinates in Optimization of Nano-Particle Drug Delivery

Nanoparticle drug delivery better targets neoplastic lesions than free drugs and thus has emerged as a safer form of cancer therapy. Nanoparticle design variables are important determinants of efficacy as they influence the drug biodistribution and pharmacokinetics. Previously, we determined optimal designs through mechanistic modeling and optimization. However, the numerical nature of the tumor model and numerous candidate nanoparticle designs hinder hypothesis generation and treatment personalization. In this paper, we utilize the parallel coordinates technique to visualize high-dimensional optimal solutions and extract correlations between nanoparticle design and treatment outcomes. We found that at optimality, two major design variables are dependent, and thus the optimization problem can be reduced. In addition, we obtained an analytical relationship between optimal nanoparticle sizes and optimal distribution, which could facilitate the utilization of tumors models in preclinical studies. Our approach has simplified the results of the previously integrated modeling and optimization framework developed for nanotherapy and enhanced the interpretation and utilization of findings. Integrated mathematical frameworks are increasing in the medical field, and our method can be applied outside nanotherapy to facilitate the clinical translation of computational methods.

Modeling of an Ultrasound System in Targeted Drug Delivery to Abdominal Aortic Aneurysm: A Patient-Specific in Silico Study Based on Ligand-Receptor Binding

Targeted drug delivery methods have shown a significant impact on enhancing drug delivery efficiency and reducing drug side effects. While various stimuli have been used to promote the drug delivery process, applying ultrasound (US) waves to control drug particles through the human body, noninvasively, has drawn the scientist's attention. However, microcarriers delivery reaches the aneurysmal artery by US waves that exert volumetric forces on blood, and drug carriers, which can therefore affect blood flow patterns and movement pathways of drug carriers, have not yet been studied. In this study, we developed a 3-D patient-specific model of abdominal aortic aneurysm (AAA) to evaluate the effect of US waves in enhancing the drug-containing microbubbles (MBs) adhered on the AAA lumen through ligand-receptor binding. Thus, a focused US (FUS) transducer with a resonance frequency of ~1.1 MHz was added to the geometry. Then, the surface density of MBs (SDM) adhered on the AAA lumen was calculated at peak acoustic pressure of ~1.1, ~2.2, and ~4.3 MPa. Results indicated that increasing the US pressure had a significant impact on improving the MBs adhered to the intended wall, whereby US waves with the maximum pressure of ~4.3 MPa could enhance ~1- [Formula: see text] MBs adhesion ~98% relative to not using the waves. While US waves have the advantage of more SDM adhered to the whole artery wall, they adversely affect the SDM adhered on the critical wall of the abdominal aorta. Furthermore, when the US strength goes up, a reduction occurs in the SDM adhered. This reduction is higher for smaller MBs, which is the mentioned MBs' size and US strength reduced SDM adhesion by about ~50% relative to systemic injection. Therefore, it can be concluded that drug delivery using the US field increases the SDM adhered to the whole AAA wall and decreases the SDM adhered to the critical wall of AAA.

Nanodiscs: a versatile nanocarrier platform for cancer diagnosis and treatment

Cancer therapy is a significant challenge due to insufficient drug delivery to the cancer cells and non-selective killing of healthy cells by most chemotherapy agents. Nano-formulations have shown great promise for targeted drug delivery with improved efficiency. The shape and size of nanocarriers significantly affect their transport inside the body and internalization into the cancer cells. Non-spherical nanoparticles have shown prolonged blood circulation half-lives and higher cellular internalization frequency than spherical ones. Nanodiscs are desirable nano-formulations that demonstrate enhanced anisotropic character and versatile functionalization potential. Here, we review the recent development of theranostic nanodiscs for cancer mitigation ranging from traditional lipid nanodiscs encased by membrane scaffold proteins to newer nanodiscs where either the membrane scaffold proteins or the lipid bilayers themselves are replaced with their synthetic analogues. We first discuss early cancer detection enabled by nanodiscs. We then explain different strategies that have been explored to carry a wide range of payloads for chemotherapy, cancer gene therapy, and cancer vaccines. Finally, we discuss recent progress on organic-inorganic hybrid nanodiscs and polymer nanodiscs that have the potential to overcome the inherent instability problem of lipid nanodiscs.

Targeted drug delivery of magnetic microbubble for abdominal aortic aneurysm: an in silico study

Targeted drug delivery (TDD) to abdominal aortic aneurysm (AAA) using a controlled and efficient approach has recently been a significant challenge. In this study, by using magnetic microbubbles (MMBs) under a magnetic field, we investigated the MMBs performance in TDD to AAA based on the amount of surface density of MMBs (SDMM) adhered to the AAA lumen. The results showed that among the types of MMBs studied in the presence of the magnetic field, micromarkers are the best type of microbubble with a -[Formula: see text] increase in SDMM adhered to the critical area of AAA. The results show that applying a magnetic field causes the amount of SDMM adhered to the whole area of AAA to increase -[Formula: see text] times compared to the condition in which the magnetic field is absent. This optimal and maximum value occurs for Definity MMBs with - 3.3 μm diameter. Applying a magnetic field also increases the adhesion surface density by - [Formula: see text], - [Formula: see text], and -[Formula: see text] times for the Micromarker, Optison, and Sonovue microbubbles, respectively, relative to the condition in which the magnetic field is absent. It was shown that using MBBs under magnetic field has the best performance in delivery to AAA for patients with negative inlet blood flow. Also, we have exposed that in an efficient TDD to AAA using MMBs, decreasing the density of MMBs increases drug delivery efficiency and performance. When density is - [Formula: see text], there is the highest difference (about - 75%) between the SDMM adhered to AAA in the presence of a magnetic field and in the absence of a magnetic field.

Towards principled design of cancer nanomedicine to accelerate clinical translation

Nanotechnology in medical applications, especially in oncology as drug delivery systems, has recently shown promising results. However, although these advances have been promising in the pre-clinical stages, the clinical translation of this technology is challenging. To create drug delivery systems with increased treatment efficacy for clinical translation, the physicochemical characteristics of nanoparticles such as size, shape, elasticity (flexibility/rigidity), surface chemistry, and surface charge can be specified to optimize efficiency for a given application. Consequently, interdisciplinary researchers have focused on producing biocompatible materials, production technologies, or new formulations for efficient loading, and high stability. The effects of design parameters can be studied in vitro, in vivo, or using computational models, with the goal of understanding how they affect nanoparticle biophysics and their interactions with cells. The present review summarizes the advances and technologies in the production and design of cancer nanomedicines to achieve clinical translation and commercialization. We also highlight existing challenges and opportunities in the field.

Polymeric Nanoparticles Properties and Brain Delivery

Safe and reliable entry to the brain is essential for successful diagnosis and treatment of diseases, but it still poses major challenges. As a result, many therapeutic approaches to treating disorders associated with the central nervous system (CNS) still only show limited success. Nano-sized systems are being explored as drug carriers and show great improvements in the delivery of many therapeutics. The systemic delivery of nanoparticles (NPs) or nanocarriers (NCs) to the brain involves reaching the neurovascular unit (NVU), being transported across the blood-brain barrier, (BBB) and accumulating in the brain. Each of these steps can benefit from specifically controlled properties of NPs. Here, we discuss how brain delivery by NPs can benefit from careful design of the NP properties. Properties such as size, charge, shape, and ligand functionalization are commonly addressed in the literature; however, properties such as ligand density, linker length, avidity, protein corona, and stiffness are insufficiently discussed. This is unfortunate since they present great value against multiple barriers encountered by the NPs before reaching the brain, particularly the BBB. We further highlight important examples utilizing targeting ligands and how functionalization parameters, e.g., ligand density and ligand properties, can affect the success of the nano-based delivery system.

Embracing nanomaterials' interactions with the innate immune system

Immunotherapy has firmly established itself as a compelling avenue for treating disease. Although many clinically approved immunotherapeutics engage the adaptive immune system, therapeutically targeting the innate immune system remains much less explored. Nanomedicine offers a compelling opportunity for innate immune system engagement, as many nanomaterials inherently interact with myeloid cells (e.g., monocytes, macrophages, neutrophils, and dendritic cells) or can be functionalized to target their cell-surface receptors. Here, we provide a perspective on exploiting nanomaterials for innate immune system regulation. We focus on specific nanomaterial design parameters, including size, form, rigidity, charge, and surface decoration. Furthermore, we examine the potential of high-throughput screening and machine learning, while also providing recommendations for advancing the field. This article is categorized under: Nanotechnology Approaches to Biology > Nanoscale Systems in Biology Diagnostic Tools > In Vivo Nanodiagnostics and Imaging Therapeutic Approaches and Drug Discovery > Nanomedicine for Oncologic Disease.

Synthesis, Characterization, and Cytotoxicity Evaluation of Polyethylene Glycol-Coated Iron Oxide Nanoparticles for Radiotherapy Application

Background:

Treatment methods for cancer that are widely being utilized affect both normal and cancerous cells. We report synthesis polyethylene glycol (PEG)-coated Fe₃O₄ nanoparticles (NPs) and its characteristic properties and appraise its potential as a promising radiation sensitizer candidate in radiotherapy that improves cancer treatment and reduces side effects of radiation.

Materials and methods:

PEG-coated Fe₃O₄ NPs were synthesized by chemical coprecipitation method and characterized by studying their size, structure, functional group, stability, magnetization, and cytotoxicity using different techniques. X-ray powder diffraction, Fourier transform infrared spectroscopy, and thermogravimetric analysis results show that Fe₃O₄ NPs have been functionalized with PEG molecules during the course of synthesis.

Results

Synthesized NPs have good stability based on zeta-potential study. Dynamic light-scattering results reveal that PEG-coated Fe₃O₄ has a greater hydrodynamic size than bare Fe₃O₄. Transmission electron microscopy (TEM) micrograph exhibited that NPs are roughly spherical with size in range of 10–20 nm. Saturation magnetization value of PEG-coated and bare Fe₃O₄ also confirms coating and shows superparamagnetic behavior. Cytotoxicity evaluation study indicated that PEG-coated Fe₃O₄ is biocompatible on L929 and toxic on Michigan Cancer Foundation-7 (MCF-7) (breast cancer cells).

Conclusion:

These characterized properties of PEG-coated Fe₃O₄ NPs show that it could be used as a potential radiosensitizer candidate in radiotherapy to significantly improve cancer treatment and minimize painful side effects of radiation.

Comprehensively enhanced delivery cascade by transformable beaded nanofibrils for pancreatic cancer therapy

Facing the barriers in each step of the in vivo delivery cascade, the low drug delivery efficiency remains problematic in tumor therapy. Although recently the nanofibril drug delivery systems have shown improved circulation and accumulation compared with nanoparticles, the poor deep penetration and cellular internalization hinder their application, especially for pancreatic cancer with dense stroma. To comprehensively address the hurdles in the delivery cascade, a matrix metalloproteinase 2 (MMP-2) responsive transformable beaded nanofibril, which integrates the merits of nanofibril and small-sized nanoparticles, is established. The beaded nanofibril (GD@PPF) is prepared by conjugating gemcitabine-loaded small-sized nanoparticles (GD) with fibrous PEG-PCL (PPF) via GPLGVRG, a substrate peptide of MMP-2. GD@PPF escapes the clearance of the reticuloendothelial system (RES), prolongs the circulation time, and increases the selective accumulation in the tumor as fibrous micelles. Once accumulated in the tumor, small positively-charged GD is released from the beaded nanofibrils in response to MMP-2 overexpression in the stroma of pancreatic cancer, enabling permeation in the dense tumor matrix and cellular internalization, which makes up for the shortcomings of fibrous micelles. Furthermore, the remaining fibrous PPF surround the tumor tightly to impede the efflux of drugs, leading to improved retention. GD@PPF is biocompatible and exhibits excellent antitumor effect in Pan 02 subcutaneous tumor models. Therefore, the MMP-2 responsive transformable beaded nanofibril, which enhances the delivery efficiency in multiple stage of the delivery cascade, presents a promising strategy for pancreatic cancer therapy.

Quantitatively Tracking Bio-Nano Interactions of Metal-Phenolic Nanocapsules by Mass Cytometry

Polymer nanocapsules, with a hollow structure, are increasingly finding widespread use as drug delivery carriers; however, quantitatively evaluating the bio-nano interactions of nanocapsules remains challenging. Herein, poly(ethylene glycol) (PEG)-based metal-phenolic network (MPN) nanocapsules of three sizes (50, 100, and 150 nm) are engineered via supramolecular template-assisted assembly and the effect of the nanocapsule size on bio-nano interactions is investigated using in vitro cell experiments, ex vivo whole blood assays, and in vivo rat models. To track the nanocapsules by mass cytometry, a preformed gold nanoparticle (14 nm) is encapsulated into each PEG-MPN nanocapsule. The results reveal that decreasing the size of the PEG-MPN nanocapsules from 150 to 50 nm leads to reduced association (up to 70%) with phagocytic blood cells in human blood and prolongs in vivo systemic exposure in rat models. The findings provide insights into MPN-based nanocapsules and represent a platform for studying bio-nano interactions.

Tumor-Associated Fibroblast-Targeting Nanoparticles for Enhancing Solid Tumor Therapy: Progress and Challenges

Even though nanoparticle drug delivery systems (nanoDDSs) have improved antitumor efficacy by delivering more drugs to tumor sites compared to free and unencapsulated therapeutics, achieving satisfactory distribution and penetration of nanoDDSs inside solid tumors, especially in stromal fibrous tumors, remains challenging. As one of the most common stromal cells in solid tumors, tumor-associated fibroblasts (TAFs) not only promote tumor growth and metastasis but also reduce the drug delivery efficiency of nanoparticles through the tumor's inherent physical and physiological barriers. Thus, TAFs have been emerging as attractive targets, and TAF-targeting nanotherapeutics have been extensively explored to enhance the tumor delivery efficiency and efficacy of various anticancer agents. The purpose of this Review is to opportunely summarize the underlying mechanisms of TAFs on obstructing nanoparticle-mediated drug delivery into tumors and discuss the current advances of a plethora of nanotherapeutic approaches for effectively targeting TAFs.

Anti-Inflammatory Effect of Very High Dose Local Vessel Wall Statin Administration: Poly(L,L-Lactide) Biodegradable Microspheres with Simvastatin for Drug Delivery System (DDS)

Atherosclerosis involves an ongoing inflammatory response of the vascular endothelium and vessel wall of the aorta and vein. The pleiotropic effects of statins have been well described in many in vitro and in vivo studies, but these effects are difficult to achieve in clinical practice due to the low bioavailability of statins and their first-pass metabolism in the liver. The aim of this study was to test a vessel wall local drug delivery system (DDS) using PLA microstructures loaded with simvastatin. Wistar rats were fed high cholesterol chow as a model. The rat vessels were chemically injured by repeated injections of perivascular paclitaxel and 5-fluorouracil. The vessels were then cultured and treated by the injection of several concentrations of poly(L,L-lactide) microparticles loaded with the high local HMG-CoA inhibitor simvastatin (0.58 mg/kg) concentration (SVPLA). Histopathological examinations of the harvested vessels and vital organs after 24 h, 7 days and 4 weeks were performed. Microcirculation in mice as an additional test was performed to demonstrate the safety of this approach. A single dose of SVPLA microspheres with an average diameter of 6.4 μm and a drug concentration equal to 8.1% of particles limited the inflammatory reaction of the endothelium and vessel wall and had no influence on microcirculation in vivo or in vitro. A potent pleiotropic (anti-inflammatory) effect of simvastatin after local SVPLA administration was observed. Moreover, significant concentrations of free simvastatin were observed in the vessel wall (compared to the maximum serum level). In addition, it appeared that simvastatin, once locally administered as SVPLA particles, exerted potent pleiotropic effects on chemically injured vessels and presented anti-inflammatory action. Presumably, this effect was due to the high local concentrations of simvastatin. No local or systemic side effects were observed. This approach could be useful for local simvastatin DDSs when high, local drug concentrations are difficult to obtain, or systemic side effects are present.

Morphologic Design of Silver-Bearing Sugar-Based Polymer Nanoparticles for Uroepithelial Cell Binding and Antimicrobial Delivery

Platelet-like and cylindrical nanostructures from sugar-based polymers are designed to mimic the aspect ratio of bacteria and achieve uroepithelial cell binding and internalization, thereby improving their potential for local treatment of recurrent urinary tract infections. Polymer nanostructures, derived from amphiphilic block polymers composed of zwitterionic poly(d-glucose carbonate) and semicrystalline poly(l-lactide) segments, were constructed with morphologies that could be tuned to enhance uroepithelial cell binding. These nanoparticles exhibited negligible cytotoxicity, immunotoxicity, and cytokine adsorption, while also offering substantial silver cation loading capacity, extended release, and in vitro antimicrobial activity (as effective as free silver cations) against uropathogenic Escherichia coli. In comparison to spherical analogues, cylindrical and platelet-like nanostructures engaged in significantly higher association with uroepithelial cells, as measured by flow cytometry; despite their larger size, platelet-like nanostructures maintained the capacity for cell internalization. This work establishes initial evidence of degradable platelet-shaped nanostructures as versatile therapeutic carriers for treatment of epithelial infections.

Synthesis of Zr-89-Labeled Folic Acid-Conjugated Silica (SiO2) Microwire as a Tumor Diagnostics Carrier for Positron Emission Tomography

This study evaluated the in vivo behavior and accumulation of silica particles in the form of wires, which were actively studied as drug carriers along with spheres, using positron emission tomography (PET). Wire-shaped silicon dioxide (SiO₂) was synthesized at micro-size, using anodic aluminum oxide (AAO), a template, and folic acid (FA), which specifically binds folate receptors (FR) which are overexpressed in many cancers, and which was bound to the wire’s surface to confirm its possible use as a cancer diagnostic agent. In addition, for evaluation using PET, the positron-emitting nuclide ⁸⁹Zr (t_1/2 = 3.3 days) was directly bonded to the hydroxyl group (-OH) on the particle surface. The diameter and shape of the synthesized silica microwires (SMWs) were confirmed using SEM and TEM, the chemical bonding of FA was confirmed through FT–IR and NMR, and the labeling of ⁸⁹Zr was measured by means of radio-thin-layer chromatography (TLC) measurement. Folic acid-conjugated SMWs (FA-SMWs) were found to have a low receptor-mediated uptake in cell internalization evaluation, but in PET studies, FA-SMWs stayed longer at the tumor site. In conclusion, we successfully synthesized a homogeneous silica microwire for drug delivery, we confirmed that the FA-conjugated sample remains at the tumor site for a relatively longer time, and we have reported the characteristic in vivo behavior of ⁸⁹Zr-FA-SMWs.

Development of Polymeric Nanoparticles for Blood-Brain Barrier Transfer-Strategies and Challenges

Neurological disorders such as Alzheimer's disease, stroke, and brain cancers are difficult to treat with current drugs as their delivery efficacy to the brain is severely hampered by the presence of the blood-brain barrier (BBB). Drug delivery systems have been extensively explored in recent decades aiming to circumvent this barrier. In particular, polymeric nanoparticles have shown enormous potentials owing to their unique properties, such as high tunability, ease of synthesis, and control over drug release profile. However, careful analysis of their performance in effective drug transport across the BBB should be performed using clinically relevant testing models. In this review, polymeric nanoparticle systems for drug delivery to the central nervous system are discussed with an emphasis on the effects of particle size, shape, and surface modifications on BBB penetration. Moreover, the authors critically analyze the current in vitro and in vivo models used to evaluate BBB penetration efficacy, including the latest developments in the BBB-on-a-chip models. Finally, the challenges and future perspectives for the development of polymeric nanoparticles to combat neurological disorders are discussed.