The intracellular effects of non-ionic amphiphilic cyclodextrin nanoparticles in the delivery of anticancer drugs

Coumarin/β-Cyclodextrin Inclusion Complexes Promote Acceleration and Improvement of Wound Healing

Coumarins have great pharmacotherapeutic potential, presenting several biological and pharmaceutical applications, like antibiotic, fungicidal, anti-inflammatory, anticancer, anti-HIV, and healing activities, among others. These molecules are practically insoluble in water, and for biological applications, it became necessary to complex them with cyclodextrins (CDs), which influence their bioavailability in the target organism. In this work, we studied two coumarins, and it was possible to conclude that there were structural differences between 4,7-dimethyl-2H-chromen-2-one (DMC) and 7-methoxy-4-methyl-2H-chromen-2-one (MMC)/β-CD that were solubilized in ethanol, frozen, and lyophilized (FL) and the mechanical mixtures (MM). In addition, the inclusion complex formation improved the solubility of DMC and MMC in an aqueous medium. According to the data, the inclusion complexes were formed and are more stable at a molar ratio of 2:1 coumarin/β-CD, and hydrogen bonds along with π-π stacking interactions are responsible for the better stability, especially for (MMC)2@β-CD. In vivo wound healing studies in mice showed faster re-epithelialization and the best deposition of collagen with the (DMC)2@β-CD (FL) and (MMC)2@β-CD (FL) inclusion complexes, demonstrating clearly that they have potential in wound repair. Therefore, (DMC)2@β-CD (FL) deserves great attention because it presented excellent results, reducing the granulation tissue and mast cell density and improving collagen remodeling. Finally, the protein binding studies suggested that the anti-inflammatory activities might exert their biological function through the inhibition of MEK, providing the possibility of development of new MEK inhibitors.

Effect of Dielectric Constant on the Zeta Potential of Spherical Electric Double Layers

Zeta potential refers to the electrokinetic potential present in colloidal systems, exerting significant influence on the diverse properties of nano-drug delivery systems. The impact of the dielectric constant on the zeta potential and charge inversion of highly charged colloidal particles immersed in a variety of solvents spanning from polar, such as water, to nonpolar solvents and in the presence of multivalent salts was investigated through primitive Monte Carlo (MC) model simulations. Zeta potential, ξ, is decreased with the decreasing dielectric constant of the solvent and upon further increase in the salinity and the valency of the salt. At elevated levels of salt, the colloidal particles become overcharged in all solvents. As a result, their apparent charge becomes opposite in sign to the stoichiometric charge. This reversal of charge intensifies until reaching a saturation point with further increase in salinity.

Recent Progress of Supramolecular Chemotherapy Based on Host-Guest Interactions

Chemotherapy is widely recognized as an effective approach for treating cancer due to its ability to eliminate cancer cells using chemotherapeutic drugs. However, traditional chemotherapy suffers from various drawbacks, including limited solubility and stability of drugs, severe side effects, low bioavailability, drug resistance, and challenges in tracking treatment efficacy. These limitations greatly hinder its widespread clinical application. In contrast, supramolecular chemotherapy, which relies on host-guest interactions, presents a promising alternative by offering highly efficient and minimally toxic anticancer drug delivery. In this review, an overview of recent advancements in supramolecular chemotherapy based on host-guest interactions is provided. The significant role it plays in guiding cancer therapy is emphasized. Drawing on a wealth of cutting-edge research, herein, a timely and valuable resource for individuals interested in the field of supramolecular chemotherapy or cancer therapy, is presented. Furthermore, this review contributes to the progression of the field of supramolecular chemotherapy toward clinical application.

Development of nanoparticles based on amphiphilic cyclodextrins for the delivery of active substances

Although amphiphilic cyclodextrin derivatives (ACDs) serve as valuable building blocks for nanomedicine formulations, their widespread production still encounters various challenges, limiting large-scale manufacturing. This work focuses on a robust alternative pathway using mineral base catalysis to transesterify β-cyclodextrin with long-chain vinyl esters, yielding ACD with modular and controlled hydrocarbon chain grafting. ACDs with a wide range of degrees of substitution (DS) were reliably synthesized, as indicated by extensive physicochemical characterization, including MALDI-TOF mass spectrometry. The influence of various factors, including the type of catalyst and the length of the hydrocarbon moiety of the vinyl ester, was studied in detail. ACDs were assessed for their ability to form colloidal suspensions by nanoprecipitation, with or without PEGylated phospholipid. Small-angle X-ray scattering and cryo-electron microscopy revealed the formation of nanoparticles with distinct ultrastructures depending on the DS: an onion-like structure for low and very high DS, and reversed hexagonal organization for DS between 4.5 and 6.1. We confirmed the furtivity of the PEGylated versions of the nanoparticles through complement activation experiments and that they were well tolerated in-vivo on a zebrafish larvae model after intravenous injection. Furthermore, a biodistribution experiment showed that the nanoparticles left the bloodstream within 10 h after injection and were phagocytosed by macrophages.

Isolation, characterization, development and evaluation of phytoconstituent based formulation for diabetic neuropathy

Background

Morus alba Linn, referred to as white mulberry, is a potential traditional medicine for diabetes and neuroprotection.

Aim

Isolation, characterization, development and evaluation of phytoconstituent based formulation for diabetic neuropathy.

Material and methods

The stem Bark of M. alba was peeled and subjected to extraction. A phytoconstituent was then isolated by column chromatography and characterized using Mass spectroscopy, FTIR, and NMR. The isolated phytoconstituent was used to formulate a nanoemulsion. Nanoemulsion was also characterized for viscosity, surface tension, refractive index, pH, and particle size. Selected nanoemulsion formulations were then tested for acute oral toxicity and diabetic neuropathy, including behavioral, hematological, histopathological, and biomarker examinations.

Results

The spectral analysis affirmed that the isolated compound was found to be chrysin. A nanoemulsion formulation was made using the chrysin and was characterized and found to be stable during the stability testing and fulfilled all other testing parameters. Then acute oral toxicity study of the formulations was found to be safe. Formulations were found to possess significant results against diabetic neuropathy in rats. Biomarkers were analyzed for their mechanistic involvement in reducing neuropathy in rats, and it was found that the oxidative pathway was considerably restored, suggesting that chrysin causes these effects via this pathway.

Conclusions

Results suggests that isolated phytoconstituent (chrysin) from the bark of Morus alba derived nanoemulsion has protective and beneficial effects by diminishing the oxidative damage against alloxan-induced diabetic neuropathy in rats.

Amphiphilic Cyclodextrin Nanoparticles as Delivery System for Idebenone: A Preformulation Study

Idebenone (IDE), a synthetic short-chain analogue of coenzyme Q10, is a potent antioxidant able to prevent lipid peroxidation and stimulate nerve growth factor. Due to these properties, IDE could potentially be active towards cerebral disorders, but its poor water solubility limits its clinical application. Octanoyl-β-cyclodextrin is an amphiphilic cyclodextrin (ACyD8) bearing, on average, ten octanoyl substituents able to self-assemble in aqueous solutions, forming various typologies of supramolecular nanoassemblies. Here, we developed nanoparticles based on ACyD8 (ACyD8-NPs) for the potential intranasal administration of IDE to treat neurological disorders, such as Alzheimer’s Disease. Nanoparticles were prepared using the nanoprecipitation method and were characterized for their size, zeta potential and morphology. STEM images showed spherical particles, with smooth surfaces and sizes of about 100 nm, suitable for the proposed therapeutical aim. The ACyD8-NPs effectively loaded IDE, showing a high encapsulation efficiency and drug loading percentage. To evaluate the host/guest interaction, UV-vis titration, mono- and two-dimensional NMR analyses, and molecular modeling studies were performed. IDE showed a high affinity for the ACyD8 cavity, forming a 1:1 inclusion complex with a high association constant. A biphasic and sustained release of IDE was observed from the ACyD8-NPs, and, after a burst effect of about 40%, the release was prolonged over 10 days. In vitro studies confirmed the lack of toxicity of the IDE/ACyD8-NPs on neuronal SH-SY5Y cells, and they demonstrated their antioxidant effect upon H2O2 exposure, as a general source of ROS.

Overcoming the non-kinetic activity of EGFR1 using multi-functionalized mesoporous silica nanocarrier for in vitro delivery of siRNA

Triple-negative breast cancer (TNBC) does not respond to HER2-targeted and hormone-based medicines. Epidermal growth factor receptor 1 (EGFR1) is commonly overexpressed in up to 70% of TNBC cases, so targeting cancer cells via this receptor could emerge as a favored modality for TNBC therapy due to its target specificity. The development of mesoporous silica nanoparticles (MSNs) as carriers for siRNAs remains a rapidly growing area of research. For this purpose, a multi-functionalized KIT-6 containing the guanidinium ionic liquid (GuIL), PEI and PEGylated folic acid (FA-PEG) was designed. Accordingly, KIT-6 was fabricated and modified with FA-PEG and PEI polymers attached on the surface and the GuIL placed in the mesopores. Subsequent to confirming the structure of this multi-functionalized KIT-6- based nanocarrier using TEM, SEM, AFM, BET, BJH, DLS and Zeta Potential, it was investigated for uploading and transferring the anti-EGFR1 siRNAs to the MD-MBA-231 cell line. The rate of cellular uptake, cellular localization and endolysosomal escape was evaluated based on the fluorescent intensity of FAM-labelled siRNA using flowcytometry analysis and confocal laser scanning microscopy (CLSM). The 64% cellular uptake after 4 h incubation, clearly suggested the successful delivery of siRNA into the cells and, CLSM demonstrated that siRNA@[FA-PEGylated/PEI@GuIL@KIT-6] may escape endosomal entrapment after 6 h incubation. Using qPCR, quantitative evaluation of EGFR1 gene expression, a knockdown of 82% was found, which resulted in a functional change in the expression of EGFR1 targets. Co-treatment of chemotherapy drug "carboplatin" in combination with siRNA@[FA-PEGylated/PEI@GuIL@KIT-6] exhibited a remarkable cytotoxic effect in comparison to carboplatin alone.

Layer-By-Layer Self-Assembled Dip Coating for Antifouling Functionalized Finishing of Cotton Textile

The fouling of surfaces such as textiles is a major health challenge, and there is a continuous effort to develop materials and processes to overcome it. In consideration of this, this study regards the development of antifouling functional nanoencapsulated finishing for the cotton textile fabric by employing a layer-by-layer dip coating technique. Antifouling textile finishing was formulated by inducing the nanoencapsulation of the antifouling functional group inside the hydrophobic polymeric shell. Cotton fabric was taken as a substrate to incorporate antibacterial functionality by alternatively fabricating multilayers of antifouling polymeric formulation (APF) and polyelectrolyte solution. The surface morphology of nanoencapsulated finished textile fabric was characterized through scanning electron microscopy to confirm the uniform distribution of nanoparticles on the cotton textile fabric. Optical profilometry and atomic force microscopy studies indicated increased surface roughness in the coated textile substrate as compared to the uncoated textile. The surface thickness of the fabricated textile increased with the number of deposited bilayers on the textile substrate. Surface hydrophobicity increased with number of coating bilayers with θ values of x for single layer, up to y for 20 bilayers. The antibacterial activity of the uncoated and layer-by-layer coated finished textile was also evaluated. It was significant and exhibited a significant zone of inhibition against microbial strains Gram-positive S. aureus and Gram-negative E. coli. The bilayer coating exhibited water repellency, hydrophobicity, and antibacterial activity. Thus, the fabricated textile could be highly useful for many industrial and biomedical applications.

Topological defects in polycrystalline hexosomes from β-cyclodextrin fatty esters

Colloidal nanoparticles were prepared by aqueous self-assembly of amphiphilic β-cyclodextrins (βCDs) acylated on their secondary face with C₁₄ chains to a total degree of substitution of 7.0, via a thermolysin-catalyzed transesterification process. The small-angle X-ray scattering pattern of the nanoparticles was consistent with a reverse hexagonal organization. Cryo-transmission electron microscopy images revealed particles with spectacular tortuous shapes and consisting of misoriented domains with a regular columnar hexagonal structure, separated by sharp interfaces. Edge dislocations as well as a variety of stepped tilt grain boundaries (GBs) composed of symmetrical and asymmetrical sections, together with one twist GB, were identified from axial views of the columnar organization. The tilt GB structure was analyzed using the concepts of coincidence site lattice and structural units developed to describe the atomic structure of interfaces in various types of polycrystals. The tilt GBs were described using sequences of βCD-C₁₄ columns that differed by the number of neighboring columns (5, 6 or 7) and exhibiting distinctive contrasts. To our knowledge, this is the first time that these types of topological defects are described at the nanometric scale by direct observation of colloidal polycrystalline hexosomes of self-organized amphiphiles.

A folate-targeted PEGylated cyclodextrin-based nanoformulation achieves co-delivery of docetaxel and siRNA for colorectal cancer

Docetaxel (DTX) is a chemotherapeutic agent used for a range of cancers, but it has little activity against colorectal cancer (CRC). However, combination therapy with other therapeutic agents is a potential strategy to enhance the efficacy of DTX in CRC treatment. The nuclear factor-κB (NF-κB) signaling pathway is implicated in a variety of malignancies (e.g., CRC), and the blockade of NF-κB may increase the sensitivity of cancer cells to chemotherapy. The application of small interference RNA (siRNA) to inhibit the translation of complementary mRNA has demonstrated the potential for cancer gene therapy. In this study, an amphiphilic cationic cyclodextrin (CD) nanoparticle modified with PEGylated folate (FA; a ligand to target folate receptor on CRC) has been developed for co-delivery of DTX and siRNA (against the RelA, a subunit of NF-κB) in the treatment of CRC. The resultant co-formulation (CD.DTX.siRelA.PEG-FA) achieved cell-specific uptake indicating the function of the folate targeting ligand. The CD.DTX.siRelA.PEG-FA nanoparticle enhanced the apoptotic effect of DTX with the downregulation of RelA expression, which significantly retarded the growth of CRC in mice, without causing significant toxicity. These results suggest that the FA-targeted PEGylated CD-based co-formulation provides a promising strategy for combining DTX and siRNA in treating CRC.

Therapeutic Efficacy and Biodistribution of Paclitaxel-Bound Amphiphilic Cyclodextrin Nanoparticles: Analyses in 3D Tumor Culture and Tumor-Bearing Animals In Vivo

The uniqueness of paclitaxel’s antimitotic action mechanism has fueled research toward its application in more effective and safer cancer treatments. However, the low water solubility, recrystallization, and side effects hinder the clinical success of classic paclitaxel chemotherapy. The aim of this study was to evaluate the in vivo efficacy and biodistribution of paclitaxel encapsulated in injectable amphiphilic cyclodextrin nanoparticles of different surface charges. It was found that paclitaxel-loaded amphiphilic cyclodextrin nanoparticles showed an antitumoral effect earlier than the drug solution. Moreover, the blank nanoparticles reduced the tumor growth with a similar trend to the paclitaxel solution. At 24 h, the nanoparticles had not accumulated in the heart and lungs according to the biodistribution assessed by in vivo imaging. Therefore, our results indicated that the amphiphilic cyclodextrin nanoparticles are potentially devoid of cardiac toxicity, which limits the clinical use and commercialization of certain polymeric nanoparticles. In conclusion, the amphiphilic cyclodextrin nanoparticles with different surface charge increased the efficiency of paclitaxel in vitro and in vivo. Cyclodextrin nanoparticles could be a good candidate vehicle for intravenous paclitaxel delivery.

Biodegradable and biocompatible polymeric nanoparticles for enhanced solubility and safe oral delivery of docetaxel: In vivo toxicity evaluation

Docetaxel (DTX) is a chemotherapeutic drug with poor hydrophilicity and permeability. Its lipophilic properties decrease its absorption in systemic circulation which hinders its therapeutic efficacy & safety. Cyclodextrins (CDs) with their unique structural properties enhance solubility of chemotherapeutic drugs. The study was designed to formulate docetaxel-cyclodextrins inclusion complexes for enhancement of solubility with sulfobutyl ether β-cyclodextrin (SBE₇-β-CD), hydroxypropyl β-cyclodextrin (HP-β-CD) and β-cyclodextrin (β-CD). Further, by using ionic gelation method polymeric nanoparticles of docetaxel-cyclodextrins were prepared with sodium tri poly phosphate (STPP) and chitosan (CS). Optimization is performed by varying CS and STPP mass ratios. Nanoparticles were analyzed for their physicochemical properties, drug-excipient compatibility, thermal stability and oral toxicity. CDs enhanced the solubility of DTX. Nanoparticles were found within 144.8 ± 65.19 - 372.0 ± 126.9 nm diameters with polydispersity ranging 0.117-0.375. The particles were found round & circular in shape with smooth and non-porous surface. Increased quantity of drug release was observed from DTX-CDs loaded nanoparticles than pure drug loaded nanoparticles. Oral toxicity in rabbits revealed biochemical, histopathological profile with no toxic effect on cellular structure of animals.

Amphiphilic cationic cyclodextrin nanovesicles: a versatile cue for guiding cell adhesion

It is well known that amphiphilic cationic β-cyclodextrins (amβCDs) form nanovesicles able to release their cargo in aqueous solution upon applying different stimuli. In addition they can be selectively positioned onto substrates by unconventional soft lithography. This makes them a powerful tool for designing environments where different cues can be externally supplied to the cells helping to achieve good control of their fate. Lithographically controlled wetting (LCW) of amβCD nanovesicles loaded with fluorescein isothiocyanate (FITC), amβCD/FITC, has been used here to fabricate geometrically functionalized surfaces, thus achieving multiscale control of the cell environment. The amβCD functionalization was strongly influenced by the surface energy of the underlying substrates that, according to their hydrophobicity, orient the amβCD in a different way, thus "offering" different portions to the cells. The structure of the pattern was characterized both over large scales exploiting the FITC fluorescence and at the nanoscale by atomic force microscopy. Cell guidance and aCD/FITC cell internalization were demonstrated in human neuroblastoma SHSY5Y cells.

Cyclodextrin as a magic switch in covalent and non-covalent anticancer drug release systems

Cancer has been a threat to human health, so its treatment is a huge challenge to the present medical field. One of commonly used methods is the controlled release of anticancer drug to reduce the dose for patients, increase the stability of drug treatment and minimize side effects. Cyclodextrin is a kind of cyclic oligosaccharide produced by amylase hydrolysis. Because cyclodextrin contains a cavity structure and active hydroxyl groups, it has a positive effect on the study of the controlled release of anticancer drugs. This article reviews the controlled release of current anticancer drugs based on cyclodextrins as a "flexible switch", and discusses the classification of different types of release systems, highlighting their role in cancer treatment. Moreover, the opportunities and challenges of cyclodextrin as a magic switch in the controlled release of anticancer drugs are discussed.

Cyclodextrin Based Nanoparticles for Drug Delivery and Theranostics

Colloidal nanoparticulate technology has been described in the literature as a versatile drug delivery system. But it possesses some inherent lacunae in their formulation. Cyclodextrins (CDs) have been extensively reported for the solubility enhancement of poorly water-soluble drugs. The CDs can cause intervention in aspects related to nanoparticles (NPs) that include improving drug loading in nano-system, improving stability, site-specific/targeted drug delivery, improving solubility profile and absorption of the drug in nanosystem with consequent improvement in bioavailability, with the possibility of controlled release, safety and efficacy. They find application in for simultaneous diagnosis and therapeutics for better treatment procedures. The current communication is focused on the application of CDs to overcome troubles in nanoparticulate formulation and enhancement of their performance. It also envisages the theranostic aspects of CDs.

In vitro and in vivo characteristics of doxorubicin-loaded cyclodextrine-based polyester modified gadolinium oxide nanoparticles: a versatile targeted theranostic system for tumour chemotherapy and molecular resonance imaging

β-Cyclodextrine-based polyester was coated on the surface of gadolinium oxide nanoparticles (NPs) and then functionalised with folic acid to produce an efficient pH-sensitive targeted theranostic system (Gd₂O₃@PCD-FA) for doxorubicin delivery and magnetic resonance imaging (MRI). Gd₂O₃@PCD-FA was fully characterised by FTIR, vibrating sample magnetometer, TGA, XRD, SEM and TEM analyses. The dissolution profile of DOX showed a pH sensitive release. No significant toxicity was observed for the targeted NPs (Gd₂O₃@PCD-FA) and DOX-loaded NPs inhibiting M109 cells viability more efficiently than free DOX. Moreover, the negligible hemolytic activity of the targeted NPs showed their appropriate hemocompatibility. The preferential uptake was observed for the developed Gd₂O₃@PCD-FA-DOX NPs in comparison with Dotarem using T₁- and T₂-weighted MRI in the presence of folate receptor-positive and folate receptor-negative cancer cells (M109 and 4T1, respectively). Furthermore, in vivo studies revealed that Gd₂O₃@PCD-FA-DOX not only exhibited considerably relaxivity performance as a contrast agent for MRI, but also improved in vivo anti-tumour efficacy of the system. The results suggest that Gd₂O₃@PCD-FA-DOX improves its therapeutic efficacy in the treatment of solid tumours and also reduces the adverse effects, so it could be proposed as a promising drug delivery system for chemotherapy and molecular imaging diagnosis in MRI.

Surfactant-Augmented Functional Silica Nanoparticle Based Nanofluid for Enhanced Oil Recovery at High Temperature and Salinity

Nanofluids in recent years have shown great potential as a chemical enhanced oil recovery (EOR) technology, thanks to their excellent performance in altering interfacial properties. However, because of the great challenge in preparing stable systems suitable for an elevated temperature and a high salinity environment, expanding the application of nanofluids has been greatly restrained. In this work, a novel nanofluid was prepared by integrating positively charged amino-terminated silica nanoparticles (SiNP-NH₂) with negatively charged anionic surfactant (Soloterra 964) via electrostatic force. The resulted nanofluid could be stored at relatively high salinity (15 wt % NaCl solution) and high temperature (65 °C) for more than 30 days without aggregation. Successful coating of the surfactant on target SiNPs was verified by Fourier transform infrared spectrometry and the surface charge and size distribution. In addition, the potential of the nanofluid in recovering oil was investigated by analyzing the nanofluid/Bakken oil interfacial tension and the variation trend of the oil contact angle when brine was replaced by nanofluids. Experimental results showed that the water-oil interfacial tension of the Bakken crude oil decreased by 99.85% and the contact angle increased by 237.8% compared to the original value of 13.78 mN/m and 43.4°, respectively, indicating strong oil displacement efficiency and obvious wetting transition from oil-wet toward water-wet. Spontaneous imbibition tests conducted on Berea rocks showed that the nanofluid yielded a high oil recovery rate of 46.61%, compared to that of 11.30, 16.58, and 22.89% for brine, pure SiNP-NH₂, and pure surfactant (Soloterra 964), respectively. In addition, when core flooding was applied, a total of 60.88% of the original oil in place could be recovered and an additional oil recovery of 17.23% was achieved in the chemical flooding stage. Moreover, a possible mechanism of the EOR using the nanofluid was proposed. Overall, the developed nanofluid is a promising new material for EOR.

Synthesis, Characterization, and Drug Delivery Application of Self-assembling Amphiphilic Cyclodextrin

The main aim of the research was to synthesize amphiphilic cyclodextrin (AMCD) by substituting C12 alkyl chain to a β-cyclodextrin (βCD) in a single step and to study its self-assembly in an aqueous medium. The drug delivery application of the AMCD was also evaluated by encapsulating tamoxifen citrate as a model hydrophobic drug. AMCD was able to self-assemble in aqueous media, forming nanovesicles of size < 200 nm, capable of encapsulating tamoxifen citrate (TMX). Molecular docking and MD simulation studies revealed the interaction between TMX and AMCD which formed a stable complex. TEM and AFM studies showed that nanovesicles were perfectly spherical having a smooth surface and a theoretical AMCD bilayer thickness of ~ 7.2 nm as observed from SANS studies. XRD and DSC studies revealed that TMX was amorphized and molecularly dispersed in AMCD bilayer which was released slowly following Fickian diffusion. AMCD has excellent hemocompatibility as opposed to βCD and no genotoxicity. IC₅₀ of TMX against MCF-7 cell lines was significantly reduced from 11.43 to 7.96 μg/ml after encapsulation in nanovesicle because of nanovesicles being endocytosed by the MCF-7 cells. AMCD was well tolerated by IV route at a dose of > 2000 mg/kg in rats. Pharmacokinetic profile of TMX after encapsulation was improved giving 3-fold higher AUC; extended mean residence time is improving chances of nanovesicle to extravasate in tumor via EPR effect.

Inclusion Complexes of Melphalan with Gemini-Conjugated β-Cyclodextrin: Physicochemical Properties and Chemotherapeutic Efficacy in In-Vitro Tumor Models

β-cyclodextrin (βCD) has been widely explored as an excipient for pharmaceuticals and nutraceuticals as it forms stable host–guest inclusion complexes and enhances the solubility of poorly soluble active agents. To enhance intracellular drug delivery, βCD was chemically conjugated to an 18-carbon chain cationic gemini surfactant which undergoes self-assembly to form nanoscale complexes. The novel gemini surfactant-modified βCD carrier host (hereafter referred to as 18:1βCDg) was designed to combine the solubilization and encapsulation capacity of the βCD macrocycle and the cell-penetrating ability of the gemini surfactant conjugate. Melphalan (Mel), a chemotherapeutic agent for melanoma, was selected as a model for a poorly soluble drug. Characterization of the 18:1βCDg-Mel host–guest complex was carried out using 1D/2D ¹H NMR spectroscopy and dynamic light scattering (DLS). The 1D/2D NMR spectral results indicated the formation of stable and well-defined 18:1βCDg-Mel inclusion complexes at the 2:1 host–guest mole ratio; whereas, host–drug interaction was attenuated at greater 18:1βCDg mole ratio due to hydrophobic aggregation that accounts for the reduced Mel solubility. The in vitro evaluations were performed using monolayer, 3D spheroid, and Mel-resistant melanoma cell lines. The 18:1βCDg-Mel complex showed significant enhancement in the chemotherapeutic efficacy of Mel with 2–3-fold decrease in Mel half maximal inhibitory concentration (IC₅₀) values. The findings demonstrate the potential applicability of the 18:1βCDg delivery system as a safe and efficient carrier for a poorly soluble chemotherapeutic in melanoma therapy.

Inertial cavitation of lyophilized and rehydrated nanoparticles of poly(L-lactic acid) at 835 kHz and 1.8 MPa ultrasound

Nanoparticles of poly-L-lactic acid dispersed in water and of approximately 120 nm diameter were prepared by a nanoprecipitation method followed by lyophilization together with trehalose. After rehydration, the nanodispersion was exposed to ultrasound at 835 kHz frequency and 1.8 MPa peak negative sound pressure. Substantial levels of broadband noise were surprisingly detected which are attributed to the occurance of inertial cavitation of bubbles present in the dispersion. Inertial cavitation encompasses the formation and growth of gas cavities in the rarefaction pressure cycle which collapse in the compression cycle because of the inwardly-acting inertia of the contracting gas-liquid interface. The intensity of this inertial cavitation over 600 s was similar to that produced by Optison microbubbles used as contrast agents for diagnostic ultrasound. Non-lyophilized nanodispersions produced negligible broadband noise showing that lyophilization and rehydration are requirements for broadband activity of the nanoparticles. Photon correlation spectroscopy indicates that the nanoparticles are not highly aggregated in the nanodispersion and this is supported by scanning (SEM) and transmission (TEM) electron micrographs. TEM visualized non-spherical nanoparticles with a degree of irregular, non-smooth surfaces. Although the presence of small aggregates with inter-particulate gas pockets cannot be ruled out, the inertial cavitation activity can be explained by incomplete wetting of the nanoparticle surface during rehydration of the lyophilizate. Nano-scale gas pockets may be trapped in the surface roughness of the nanoparticles and may be released and coalesce to the size required to nucleate inertial cavitation on insonation at 835 kHz/1.8 MPa.

Folate-Decorated Amphiphilic Cyclodextrins as Cell-Targeted Nanophototherapeutics

Nowadays, active targeting of nanotherapeutics is a challenging issue. Here, we propose a rational design of a ternary nanoassembly (SAP) composed of nonionic amphiphilic β-cyclodextrins (amphiphilic CD) incorporating pheophorbide (Pheo) as a phototherapeutic and an adamantanyl-folic acid conjugate (Ada-FA) to target tumor cells overexpressing α-folate receptor (FR-α(+)). Dynamic light scattering and ζ-potential pointed out the presence of nanoassemblies bearing a negative surface charge (ζ = -51 mV). Morphology of SAP was investigated by atomic force microscopy and microphotoluminescence, indicating the presence of highly emissive near-spherical assemblies of about 280 nm in size. Complementary spectroscopic techniques such as ROESY-NMR, UV/vis and steady-state fluorescence revealed that the folic acid protrudes out of amphiphilic CD rims, prone for recognition with FR-α. Pheo was strongly loaded in the nanoassembly mostly in monomeric form, thus generating singlet oxygen (¹O₂) and consequentely showing phototherapeutic action. SAP remained stable until 2 weeks in aqueous solutions. Stability studies in biologically relevant media pointed out the ability of SAP to interact with serum proteins by means of the oligoethylenglycole fringe, without destabilization. Release experiments demonstrated the sustained release of Pheo from SAP in environments mimiking physiological conditions (∼20% within 1 week), plausibly suggesting low Pheo leaking and high integrity of the assembly within 24 h, time spent on average to reach the target sites. Cellular uptake of SAP was confirmed by confocal microscopy, pointing out that SAP was internalized into the tumoral cells expressing FR-α more efficiently than SP. SAP showed improved phototoxicity in human breast MCF-7 cancer cells FR-α(+) (IC₅₀ = 270 nM) with respect to human prostate carcinoma PC3 cells (IC₅₀ = 700 nM) that express a low level of that receptor (FR-α(-)). Finally, an improved phototoxicity in FR-α(+) MCF-7 cells (IC₅₀ = 270 nM) was assessed after treatment with SAP vs SP (IC₅₀ = 600 nM) which was designed without Ada-FA as a targeting unit.

Novel propyl karaya gum nanogels for bosentan: In vitro and in vivo drug delivery performance

The amphiphilic propyl Karaya gum (KG) with a degree of propyl group substitution of 3.24 was synthesized to design self-assembled nanogels as carriers for bosentan monohydrate, a poorly soluble antihypertensive drug. The drug was physically hosted into the hydrophobic core of the micellar nanogels by solvent evaporation method. TEM images revealed spherical shape and core-shell morphology of the nanogels. Depending upon polymer: drug weight ratio, the drug entrapment efficiency of >85% was attained. The carriers had hydrodynamic diameter in the range of 230-305 nm with narrow size distribution. The zeta potential of -23.0 to -24.9 mV and low critical association concentration (CAC) of 8.32 mg/l provided evidence that the colloidal nanogel system was physically stable. Thermodynamics of the propyl KG system in water favored spontaneous self-assembly of propyl KG. FTIR, thermal and x-ray analyses suggested that the drug was compatible in the hydrophobic confines of the nanogels. The micellar nanogels liberated their contents in simulated gastrointestinal condition in a pH-dependent manner over a period of 10 h. Peppas-Sahlin modeling of in vitro drug release data suggested that the polymer relaxation/swelling mechanism dominated the drug release process. Pre-clinical testing of the mucoadhesive nanogel formulations exhibited that the system could monitor the anti-hypertensive activity for a prolonged period. Overall, this propyl KG micellar nanogel system had a great potential and splendid outlook to serve as novel oral controlled release carriers for poorly soluble drugs with outstanding pharmacodynamics.

Cyclodextrin⁻Drug Inclusion Complexes: In Vivo and In Vitro Approaches

This review aims to provide a critical review of the biological performance of natural and synthetic substances complexed with cyclodextrins, highlighting: (i) inclusion complexes with cyclodextrins and their biological studies in vitro and in vivo; (ii) Evaluation and comparison of the bioactive efficacy of complexed and non-complexed substances; (iii) Chemical and biological performance tests of inclusion complexes, aimed at the development of new pharmaceutical products. Based on the evidence presented in the review, it is clear that cyclodextrins play a vital role in the development of inclusion complexes which promote improvements in the chemical and biological properties of the complexed active principles, as well as providing improved solubility and aqueous stability. Although the literature shows the importance of their ability to help produce innovative biotechnological substances, we still need more studies to develop and expand their therapeutic properties. It is, therefore, very important to gather together evidence of the effectiveness of inclusion complexes with cyclodextrins in order to facilitate a better understanding of research on this topic and encourage further studies.

Design of cyclodextrin-based systems for intervention execution

Technologies for nucleic acid delivery have displayed high practical potential in mediating genetic manipulation to modulate metabolic pathways to combat aging. In the previous chapter, we have delineated a series of techniques for designing and developing polymeric vectors as nonviral carriers. Based on what we have discussed, this chapter will introduce how the delivery performance and versatility of polymeric vectors can be further enhanced by using cyclodextrins (CDs). Over the years, CDs have shown promising application potential in different areas, ranging from controlled drug release to chiral separation of basic drugs. These applications are largely mediated by the ability of CDs to undergo host–guest inclusion complexation. Upon incorporation of CDs into the design of a polymeric vector, not only can the flexibility of the design be increased, but the development of a multifunctional carrier for genetic manipulation can also be facilitated.

Comparative study of encapsulated peppermint and green tea essential oils in chitosan nanoparticles: Encapsulation, thermal stability, in-vitro release, antioxidant and antibacterial activities

Essential oils (EOs) such as Peppermint oil (PO) and Green Tea oil (GTO) have extensively been reported for their nutritional and biomedical properties. To overcome the sensitivity of EOs to the environmental conditions, nano-encapsulation has emerged as a method to address this limitation. In this work, PO and GTO were encapsulated in chitosan nanoparticles (CS NPs) following emulsification/ionic gelation method. The nano-encapsulated PO (CS/PO NPs) and GTO (CS/GTO NPs) were fully characterized by various methods. Spherical NPs with an average size range of 20-60 nm were revealed by TEM for both systems. The loading capacity reached 22.2% and 23.1%, for PO and GTO, respectively, and the in-vitro release followed a Fickian behavior in different buffer systems. The TGA thermograms of both nano-encapsulated EOs showed an increase in the temperature of maximum degradation rate up to 350 °C. The nano-encapsulation maintained the stability of the total phenolic contents in both EOs, improved the antioxidant activity by ~2 and 2.4-fold for PO and GTO respectively. Surprisingly, the antibacterial activity of CS/GTO NPs was more potent than CS/PO NPs and especially against Staphylococcus aureus with ~9.4 folds improvement compared to pure GTO, and ~4.7 fold against Escherichia coli.

Global omics strategies to investigate the effect of cyclodextrin nanoparticles on MCF-7 breast cancer cells

Cyclodextrins (CD) are natural macrocyclic oligosaccharides linked by α(1,4) glycosidic bonds. Hydrophobic cavity of CDs are able to incorporate small molecules, ions, macromolecules which makes them excellent delegates for forming nanoparticulate carriers upon chemical modification to render amphiphilicity to CDs. In this study, blank 6OCaproβCD nanoparticle was prepared and administered to MCF-7 breast cancer cells. The effects of these nanoparticles on the cells were investigated in depth through biochemical and proteomic tests following 48 h of incubation. Proteomics studies revealed that apoptosis-related protein levels of hnRNP and CBX1 were increased while HDGF was not affected supporting the idea that 6OCaproβCD nanoparticles prevent cell proliferation. Gene expression studies were generally in correlation with protein levels since gene expression was significantly stimulated while protein levels were lower compared to the control group suggesting that a post-transcriptional modification must have occurred. Furthermore, 6OCaproβCD was observed to not trigger multidrug resistance as proved with RT-PCR that effectuates another exquisite characteristic of 6OCaproβCD nanoparticle as carrier of chemotherapeutic drugs. Metabolomic pathways of CD effect on MCF7 cells were elucidated with HMDB as serine biosynthesis, transmembrane transport of small molecules, metabolism of steroid hormones, estrogen biosynthesis and phospholipid biosynthesis. In conclusion, 6OCaproβCD is a promising nanoparticulate carrier for chemotherapeutic drugs with intrinsic apoptotic effect to be employed in treatment of breast cancer and further studies should be conducted in order to comprehend the exact mechanism of action.

Tailored-BODIPY/Amphiphilic Cyclodextrin Nanoassemblies with PDT Effectiveness

Amphiphilic cyclodextrins (aCDs) are an intriguing class of carrier systems which, recently, have been proposed to deliver porphyrinoids and anticancer drugs or combined dose of both for dual therapeutic applications. The design of nanoassemblies based on aCD and photosensitizers (PSs) aims to preserve the photodynamic therapy (PDT) efficacy of PS, reducing the tendency of PS to self-aggregate, without affecting the quantum yield of singlet oxygen (¹O₂) production, and, not less importantly, minimizing dark toxicity and reducing photosensitization effects. With this idea in mind, in this paper, we focus on nanoassemblies between a non-ionic aCD (SC6OH) and halo-alkyl tailored iodinated boron-dipyrromethenes (BODIPY) dye, a class of molecules which recently have been successfully proposed as a stimulating alternative to porphyrinoids for their high photodynamic efficacy. Nanoassemblies of BODIPY/aCD (BL01I@SC6OH) were prepared in different aqueous media by evaporation of mixed organic film of aCD and BODIPY, hydration, and sonication. The nanostructures were characterized, measuring their hydrodynamic diameter and ξ-potential and also evaluating their time-stability in biological relevant media. Taking advantage of emissive properties of the not-iodinated BODIPY analogue (BL01), nanoassemblies based on aCD and BL01 were investigated as model system to get insight on entanglement of BODIPY in the amphiphile in aqueous dispersion, pointing out that BODIPY is well-entrapped in monomeric form (τ ≅ 6.5 ns) within the colloidal carriers. Also morphology and fluorescence emission properties were elucidated after casting the solution on glass. BL01@SC6OH is easily detectable in cytoplasm of HCT116 cell lines, evidencing the remarkable intracellular penetration of this nanoassembly similar to free BODIPY. On the same cell lines, the photodynamically active assembly BL01I/aCD shows toxicity upon irradiation. Despite the fact that free BL01I is more PDT active than its assembly, aCD can modulate the cell uptake of BODIPY, pointing out the potential of this system for in vivo PDT application.

Chemistry and engineering of cyclodextrins for molecular imaging

Cyclodextrins (CDs) are naturally occurring cyclic oligosaccharides bearing a basket-shaped topology with an "inner-outer" amphiphilic character. The abundance of hydroxyl groups enables CDs to be functionalized with multiple targeting ligands and imaging elements. The imaging time, and the payload of different imaging elements, can be tuned by taking advantage of the commercial availability of CDs with different sizes of the cavity. This review aims to offer an outlook of the chemistry and engineering of CDs for the development of molecular probes. Complexation thermodynamics of CDs, and the corresponding implications for probe design, are also presented with examples demonstrating the structural and physiochemical roles played by CDs in the full ambit of molecular imaging. We hope that this review not only offers a synopsis of the current development of CD-based molecular probes, but can also facilitate translation of the incremental advancements from the laboratory to real biomedical applications by illuminating opportunities and challenges for future research.

Lamotrigine loaded poly-ɛ-(d,l-lactide-co-caprolactone) nanoparticles as brain delivery system

Management of epilepsy requires brain delivery therapy, therefore, this study was aimed to prepare lamotrigine loaded poly-ɛ-(d,l-lactide-co-caprolactone) (PLCL) nanoparticles using spontaneous emulsification solvent diffusion method. Nanoparticles for brain delivery required to have a particle size <200 nm, polydispesity index <0.2 and a sustained drug release properties. For such aim different factors were considered in preparing the nanoparticles as PLCL monomers' ratio, type of organic solvent used to prepare the nanoparticles, amount of PLCL and Pluronic®F127 in the nanoparticles. Prepared nanoparticles were characterized for their shape, particle size, polydispersity index, zeta potential, encapsulation efficiency, drug loading capacity, process yield and in-vitro drug release pattern. The in-vivo investigation for brain delivery of selected nanoparticles delivered by intravenous route was investigated in rats and compared to that for oral tablet. The obtained nanoparticles were spherical in shape. The amount of surfactant and PLCL affected the properties of the obtained nanoparticles. Using a mixture of organic solvent in preparing the nanoparticles improved its properties. The nanoparticles prepared using PLCL with monomers' ratio of 25:75, had particle size value of 125 nm, polydispersity index value of 0.184, zeta potential value of -39 mV and encapsulation efficiency value of 99%, was selected to study their efficacy to deliver the drug to the brain. The tested nanoparticles showed higher values of T_max, C_max, AUC, and MRT in homogenized rat brain, compared to oral lamotrigine tablet, while the bioavailability of the oral tablet was higher in rat plasma compared to that for the nanoparticles. This reflects that brain was the main distribution site for tested nanoparticles, and plasma was the main distribution site for oral tablets. This confirms the goal of the selected formulation as brain delivery nanoparticles.

Self-Assembly of Amphiphilic Biotransesterified β-Cyclodextrins: Supramolecular Structure of Nanoparticles and Surface Properties

A series of β-cyclodextrin (βCD) amphiphilic derivatives with varying degrees of substitution were prepared by acylating βCDs on their secondary face using thermolysin to catalyze the transesterification. After dissolution in acetone, the βCD-C_n derivatives (n = 8, 10, 12, 14) were nanoprecipitated in water, where they self-organized into structured particles that were characterized using cryo-transmission electron microscopy (cryo-TEM) images and small-angle X-ray scattering (SAXS) data. Two types of morphologies and ultrastructures were observed depending on the total degree of substitution (TDS) of the parent derivative. The molecules with TDS < 5 formed nanospheres with a multilamellar organization, whereas those with TDS > 5 self-assembled into barrel-like (n = 8, 10, 12) or more tortuous (n = 14) particles with a columnar inverse hexagonal structure. In particular, faceted βCD-C₁₄ particles (TDS = 7) appeared to be composed of several domains with different orientations that were separated by sharp interfaces. Ultrastructural models were proposed on the basis of cryo-TEM images and the analysis of the contrast distribution in different projections of the lattice. Complementary compression isotherm experiments carried out at the air-water interface also suggested that differences in the molecular conformation of the series of derivatives existed depending on whether TDS was lower or higher than 5.

Development of polycationic amphiphilic cyclodextrin nanoparticles for anticancer drug delivery

Background: Paclitaxel is a potent anticancer drug that is effective against a wide spectrum of cancers. To overcome its bioavailability problems arising from very poor aqueous solubility and tendency to recrystallize upon dilution, paclitaxel is commercially formulated with co-solvents such as Cremophor EL® that are known to cause serious side effects during chemotherapy. Amphiphilic cyclodextrins are favored oligosaccharides as drug delivery systems for anticancer drugs, having the ability to spontaneously form nanoparticles without surfactant or co-solvents. In the past few years, polycationic, amphiphilic cyclodextrins were introduced as effective agents for gene delivery in the form of nanoplexes. In this study, the potential of polycationic, amphiphilic cyclodextrin nanoparticles were evaluated in comparison to non-ionic amphiphilic cyclodextrins and core-shell type cyclodextrin nanoparticles for paclitaxel delivery to breast tumors. Pre-formulation studies were used as a basis for selecting the suitable organic solvent and surfactant concentration for the novel polycationic cyclodextrin nanoparticles. The nanoparticles were then extensively characterized with particle size distribution, polydispersity index, zeta potential, drug loading capacity, in vitro release profiles and cytotoxicity studies. Results: Paclitaxel-loaded cyclodextrin nanoparticles were obtained in the diameter range of 80-125 nm (depending on the nature of the cyclodextrin derivative) where the smallest diameter nanoparticles were obtained with polycationic (PC) βCDC6. A strong positive charge also helped to increase the loading capacity of the nanoparticles with paclitaxel up to 60%. Interestingly, cyclodextrin nanoparticles were able to stabilize paclitaxel in aqueous solution for 30 days. All blank cyclodextrin nanoparticles were demonstrated to be non-cytotoxic against L929 mouse fibroblast cell line. In addition, paclitaxel-loaded nanoparticles have a significant anticancer effect against MCF-7 human breast cancer cell line as compared with a paclitaxel solution in DMSO. Conclusion: According to the results of this study, both amphiphilic cyclodextrin derivatives provide suitable nanometer-sized drug delivery systems for safe and efficient intravenous paclitaxel delivery for chemotherapy. In the light of these studies, it can be said that amphiphilic cyclodextrin nanoparticles of different surface charge can be considered as a promising alternative for self-assembled nanometer-sized drug carrier systems for safe and efficient chemotherapy.

Amphiphilic cyclodextrin nanoparticles

Cyclodextrins are cyclic oligosaccharides obtained by enzymatic digestion of starch. The α-, β- and γ- cyclodextrins contain respectively 6, 7 and 8 glucopyranose units, with primary and secondary hydroxyl groups located on the narrow and wider rims of a truncated cone shape structure. Such structure is that of a hydrophobic inner cavity with a hydrophilic outer surface allowing to interact with a wide range of molecules like ions, protein and oligonucleotides to form inclusion complexes. Many cyclodextrin applications in the pharmaceutical area have been widely described in the literature due to their low toxicity and low immunogenicity. The most important is to increase the solubility of hydrophobic drugs in water. Chemically modified cyclodextrin derivatives have been synthesized to enhance their properties and more specifically their pharmacological activity. Among these, amphiphilic derivatives were designed to build organized molecular structures, through selfassembling systems or by incorporation in lipid membranes, expected to improve the vectorization in the organism of the drug-containing cyclodextrin cavities. These derivatives can form a variety of supramolecular structures such as micelles, vesicles and nanoparticles. The purpose of this review is to summarize applications of amphiphilic cyclodextrins in different areas of drug delivery, particularly in protein and peptide drug delivery and gene delivery. The article highlights important amphiphilic cyclodextrin applications in the design of novel delivery systems like nanoparticles.

Prevention of Oxidized Low Density Lipoprotein-Induced Endothelial Cell Injury by DA-PLGA-PEG-cRGD Nanoparticles Combined with Ultrasound

In general, atherosclerosis is considered to be a form of chronic inflammation. Dexamethasone has anti-inflammatory effects in atherosclerosis, but it was not considered for long-term administration on account of a poor pharmacokinetic profile and adverse side effects. Nanoparticles in which drugs can be dissolved, encapsulated, entrapped or chemically attached to the particle surface have abilities to incorporate dexamethasone and to be used as controlled or targeted drug delivery system. Long circulatory polymeric nanoparticles present as an assisting approach for controlled and targeted release of the encapsulated drug at the atherosclerotic site. Polymeric nanoparticles combined with ultrasound (US) are widely applied in cancer treatment due to their time applications, low cost, simplicity, and safety. However, there are few studies on atherosclerosis treatment using polymeric nanoparticles combined with US. In this study, targeted dexamethasone acetate (DA)-loaded poly (lactide-glycolide)-polyethylene glycol-cRGD (PLGA-PEG-cRGD) nanoparticles (DA-PLGA-PEG-cRGD NPs) were prepared by the emulsion-evaporation method using cRGD modified PLGA-PEG polymeric materials (PLGA-PEG-cRGD) prepared as the carrier. The average particle size of DA-PLGA-PEG-cRGD NPs was 221.6 ± 0.9 nm. Morphology of the nanoparticles was spherical and uniformly dispersed. In addition, the DA released profiles suggested that ultrasound could promote drug release from the nanocarriers and accelerate the rate of release. In vitro, the cellular uptake process of fluorescein isothiocyanate (FITC)@DA-PLGA-PEG-cRGD NPs combined with US into the damaged human umbilical vein endothelial cells (HUVECs) indicated that US promoted rapid intracellular uptake of FITC@DA- PLGA-PEG-cRGD NPs. The cell viability of DA-PLGA-PEG-cRGD NPs combined with US reached 91.9% ± 0.2%, which demonstrated that DA-PLGA-PEG-cRGD NPs combined with US had a positive therapeutic effect on damaged HUVECs. Overall, DA-PLGA-PEG-cRGD NPs in combination with US may provide a promising drug delivery system to enhance the therapeutic effects of these chemotherapeutics at the cellular level.

Bioreducible, hydrolytically degradable and targeting polymers for gene delivery

Recently, synthetic gene carriers have been intensively developed owing to their promising application in gene therapy and considered as a suitable alternative to viral vectors because of several benefits. But cationic polymers still face some problems like low transfection efficiency, cytotoxicity, and poor cell recognition and internalization. The emerging engineered and smart polymers can respond to some changes in the biological environment like pH change, ionic strength change and redox potential, which is beneficial for cellular uptake. Redox-sensitive disulfide based and hydrolytically degradable cationic polymers serve as gene carriers with excellent transfection efficiency and good biocompatibility owing to degradation in the cytoplasm. Additionally, biodegradable polymeric micelles with cell-targeting function are recently emerging gene carriers, especially for the transfection of endothelial cells. In this review, some strategies for gene carriers based on these bioreducible and hydrolytically degradable polymers will be illustrated.

Poly (ethylene-co-vinyl alcohol)-based polymeric thermo-responsive nanocarriers for controlled delivery of epirubicin to hepatocellular carcinoma

In this study, poly(ethylene-co-vinyl alcohol) (EVOH) as a novel biocompatible polymeric scaffold was surface modified by succinylation to get EVOHS and further pegylated to improve structural properties using methoxypolyethylene glycol (5000 Da) succinate (PEGS) along with targeting with retinoic acid (RA) to get final modified active and passive targeted conjugate (PEGS-EVOHS-RA) to evaluate its ability in carrying and delivery of epirubicin to hepatocellular carcinoma cell lines in response to varying temperatures. In this regard, the PEGS-EVOHS-RA conjugate was prepared through the desired chemical reactions and its structure was confirmed using ¹H-NMR and FT-IR spectra. The micelles were prepared from PEGS-EVOHS-RA by dialysis method. The Particle size and zeta potential were measured, and entrapment efficacy along with in vitro release efficiency in different temperatures were also studied. The structural morphology of optimized nanomicelle was studied by transmission electron microscopy micrographs. The desired final micelles were evaluated for their toxicity using MTT assay on HepG2 human hepatocellular carcinoma cell lines at normal (37 °C) and elevated temperature (45 °C). The results revealed that, as the hydrophilicity of micelles increased, all characteristic properties improved. Then, these micelles can be considered as potentially effective thermo responsive delivery systems for targeted delivery of cytotoxic agents to hepatocellular carcinoma.